1 files changed, 96 insertions, 6 deletions

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 2142c6767682..f788cd61df21 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -794,6 +794,26 @@ unsigned int sysctl_sched_uclamp_util_max = SCHED_CAPACITY_SCALE;
 /* All clamps are required to be less or equal than these values */
 static struct uclamp_se uclamp_default[UCLAMP_CNT];
 
+/*
+ * This static key is used to reduce the uclamp overhead in the fast path. It
+ * primarily disables the call to uclamp_rq_{inc, dec}() in
+ * enqueue/dequeue_task().
+ *
+ * This allows users to continue to enable uclamp in their kernel config with
+ * minimum uclamp overhead in the fast path.
+ *
+ * As soon as userspace modifies any of the uclamp knobs, the static key is
+ * enabled, since we have an actual users that make use of uclamp
+ * functionality.
+ *
+ * The knobs that would enable this static key are:
+ *
+ *   * A task modifying its uclamp value with sched_setattr().
+ *   * An admin modifying the sysctl_sched_uclamp_{min, max} via procfs.
+ *   * An admin modifying the cgroup cpu.uclamp.{min, max}
+ */
+DEFINE_STATIC_KEY_FALSE(sched_uclamp_used);
+
 /* Integer rounded range for each bucket */
 #define UCLAMP_BUCKET_DELTA DIV_ROUND_CLOSEST(SCHED_CAPACITY_SCALE, UCLAMP_BUCKETS)
 
@@ -990,10 +1010,38 @@ static inline void uclamp_rq_dec_id(struct rq *rq, struct task_struct *p,
 
 	lockdep_assert_held(&rq->lock);
 
+	/*
+	 * If sched_uclamp_used was enabled after task @p was enqueued,
+	 * we could end up with unbalanced call to uclamp_rq_dec_id().
+	 *
+	 * In this case the uc_se->active flag should be false since no uclamp
+	 * accounting was performed at enqueue time and we can just return
+	 * here.
+	 *
+	 * Need to be careful of the following enqeueue/dequeue ordering
+	 * problem too
+	 *
+	 *	enqueue(taskA)
+	 *	// sched_uclamp_used gets enabled
+	 *	enqueue(taskB)
+	 *	dequeue(taskA)
+	 *	// Must not decrement bukcet->tasks here
+	 *	dequeue(taskB)
+	 *
+	 * where we could end up with stale data in uc_se and
+	 * bucket[uc_se->bucket_id].
+	 *
+	 * The following check here eliminates the possibility of such race.
+	 */
+	if (unlikely(!uc_se->active))
+		return;
+
 	bucket = &uc_rq->bucket[uc_se->bucket_id];
+
 	SCHED_WARN_ON(!bucket->tasks);
 	if (likely(bucket->tasks))
 		bucket->tasks--;
+
 	uc_se->active = false;
 
 	/*
@@ -1021,6 +1069,15 @@ static inline void uclamp_rq_inc(struct rq *rq, struct task_struct *p)
 {
 	enum uclamp_id clamp_id;
 
+	/*
+	 * Avoid any overhead until uclamp is actually used by the userspace.
+	 *
+	 * The condition is constructed such that a NOP is generated when
+	 * sched_uclamp_used is disabled.
+	 */
+	if (!static_branch_unlikely(&sched_uclamp_used))
+		return;
+
 	if (unlikely(!p->sched_class->uclamp_enabled))
 		return;
 
@@ -1036,6 +1093,15 @@ static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p)
 {
 	enum uclamp_id clamp_id;
 
+	/*
+	 * Avoid any overhead until uclamp is actually used by the userspace.
+	 *
+	 * The condition is constructed such that a NOP is generated when
+	 * sched_uclamp_used is disabled.
+	 */
+	if (!static_branch_unlikely(&sched_uclamp_used))
+		return;
+
 	if (unlikely(!p->sched_class->uclamp_enabled))
 		return;
 
@@ -1144,8 +1210,10 @@ int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
 		update_root_tg = true;
 	}
 
-	if (update_root_tg)
+	if (update_root_tg) {
+		static_branch_enable(&sched_uclamp_used);
 		uclamp_update_root_tg();
+	}
 
 	/*
 	 * We update all RUNNABLE tasks only when task groups are in use.
@@ -1180,6 +1248,15 @@ static int uclamp_validate(struct task_struct *p,
 	if (upper_bound > SCHED_CAPACITY_SCALE)
 		return -EINVAL;
 
+	/*
+	 * We have valid uclamp attributes; make sure uclamp is enabled.
+	 *
+	 * We need to do that here, because enabling static branches is a
+	 * blocking operation which obviously cannot be done while holding
+	 * scheduler locks.
+	 */
+	static_branch_enable(&sched_uclamp_used);
+
 	return 0;
 }
 
@@ -1237,6 +1314,20 @@ static void uclamp_fork(struct task_struct *p)
 	}
 }
 
+static void __init init_uclamp_rq(struct rq *rq)
+{
+	enum uclamp_id clamp_id;
+	struct uclamp_rq *uc_rq = rq->uclamp;
+
+	for_each_clamp_id(clamp_id) {
+		uc_rq[clamp_id] = (struct uclamp_rq) {
+			.value = uclamp_none(clamp_id)
+		};
+	}
+
+	rq->uclamp_flags = 0;
+}
+
 static void __init init_uclamp(void)
 {
 	struct uclamp_se uc_max = {};
@@ -1245,11 +1336,8 @@ static void __init init_uclamp(void)
 
 	mutex_init(&uclamp_mutex);
 
-	for_each_possible_cpu(cpu) {
-		memset(&cpu_rq(cpu)->uclamp, 0,
-				sizeof(struct uclamp_rq)*UCLAMP_CNT);
-		cpu_rq(cpu)->uclamp_flags = 0;
-	}
+	for_each_possible_cpu(cpu)
+		init_uclamp_rq(cpu_rq(cpu));
 
 	for_each_clamp_id(clamp_id) {
 		uclamp_se_set(&init_task.uclamp_req[clamp_id],
@@ -7431,6 +7519,8 @@ static ssize_t cpu_uclamp_write(struct kernfs_open_file *of, char *buf,
 	if (req.ret)
 		return req.ret;
 
+	static_branch_enable(&sched_uclamp_used);
+
 	mutex_lock(&uclamp_mutex);
 	rcu_read_lock();