summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-12Merge tag 'v5.3.15' into dev-5.3dev-5.3Joel Stanley296-1264/+2640
This is the 5.3.15 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-12i2c: aspeed: Prevent state corruption for IRQ with no statusEddie James1-0/+11
On the AST2600, interrupts have been observed with no interrupt status bits set. This can break the driver state machine, so these interrupts should be detected and the handler should return IRQ_NONE. This is a workaround and should not be merged upstream. OpenBMC-Staging-Count: 1 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
2019-12-12clk: ast2600: enable BCLK for PCI/PCIe bus alwaysJae Hyun Yoo1-1/+1
BCLK for PCI/PCIe bus should be enabled always with having the CLK_IS_CRITICAL flag otherwise it will be disabled at kernel late initcall phase as an unused clock, and eventually it causes unexpected behavior on BMC features that are connected to the host through PCI/PCIe bus. OpenBMC-Staging-Count: 1 Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-12-05Linux 5.3.15v5.3.15Greg Kroah-Hartman1-1/+1
2019-12-05net: fec: fix clock count mis-matchChuhong Yuan1-4/+11
commit a31eda65ba210741b598044d045480494d0ed52a upstream. pm_runtime_put_autosuspend in probe will call runtime suspend to disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM is not defined, its implementation will be empty, then runtime suspend will not be called.) Therefore, we can call pm_runtime_get_sync to runtime resume it first to enable clks, which matches the runtime suspend. (Only when CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be empty, then runtime resume will not be called.) Then it is fine to disable clks without causing clock count mis-match. Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in remove") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input sizeHans de Goede1-2/+2
commit f3e4f3fc8ee9729c4b1b27a478c68b713df53c0c upstream. The AML code implementing the WMI methods creates a variable length field to hold the input data we pass like this: CreateDWordField (Arg1, 0x0C, DSZI) Local5 = DSZI /* \HWMC.DSZI */ CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) If we pass 0 as bios_args.datasize argument then (Local5 * 0x08) is 0 which results in these errors: [ 71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133) [ 71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) [ 71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529) And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for read commands where extra input is needed to specify exactly what to read. So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected output as insize to hp_wmi_perform_query(), as we are already doing for all other HPWMI_READ commands we send. Doing so fixes these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05platform/x86: hp-wmi: Fix ACPI errors caused by too small bufferHans de Goede1-3/+3
commit 16245db1489cd9aa579506f64afeeeb13d825a93 upstream. The HP WMI calls may take up to 128 bytes of data as input, and the AML methods implementing the WMI calls, declare a couple of fields for accessing input in different sizes, specifycally the HWMC method contains: CreateField (Arg1, 0x80, 0x0400, D128) Even though we do not use any of the WMI command-types which need a buffer of this size, the APCI interpreter still tries to create it as it is declared in generoc code at the top of the HWMC method which runs before the code looks at which command-type is requested. This results in many of these errors on many different HP laptop models: [ 14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236) [ 14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543) [ 14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543) This commit increases the size of the data element of the bios_args struct to 128 bytes fixing these errors. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05HID: core: check whether Usage Page item is after Usage ID itemsCandle Sun1-6/+45
commit 1cb0d2aee26335d0bccf29100c7bed00ebece851 upstream. Upstream commit 58e75155009c ("HID: core: move Usage Page concatenation to Main item") adds support for Usage Page item after Usage ID items (such as keyboards manufactured by Primax). Usage Page concatenation in Main item works well for following report descriptor patterns: USAGE_PAGE (Keyboard) 05 07 USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 INPUT (Data,Var,Abs) 81 02 ------------- USAGE_MINIMUM (Keyboard LeftControl) 19 E0 USAGE_MAXIMUM (Keyboard Right GUI) 29 E7 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (8) 95 08 USAGE_PAGE (Keyboard) 05 07 INPUT (Data,Var,Abs) 81 02 But it makes the parser act wrong for the following report descriptor pattern(such as some Gamepads): USAGE_PAGE (Button) 05 09 USAGE (Button 1) 09 01 USAGE (Button 2) 09 02 USAGE (Button 4) 09 04 USAGE (Button 5) 09 05 USAGE (Button 7) 09 07 USAGE (Button 8) 09 08 USAGE (Button 14) 09 0E USAGE (Button 15) 09 0F USAGE (Button 13) 09 0D USAGE_PAGE (Consumer Devices) 05 0C USAGE (Back) 0a 24 02 USAGE (HomePage) 0a 23 02 LOGICAL_MINIMUM (0) 15 00 LOGICAL_MAXIMUM (1) 25 01 REPORT_SIZE (1) 75 01 REPORT_COUNT (11) 95 0B INPUT (Data,Var,Abs) 81 02 With Usage Page concatenation in Main item, parser recognizes all the 11 Usages as consumer keys, it is not the HID device's real intention. This patch checks whether Usage Page is really defined after Usage ID items by comparing usage page using status. Usage Page concatenation on currently defined Usage Page will always do in local parsing when Usage ID items encountered. When Main item is parsing, concatenation will do again with last defined Usage Page if this page has not been used in the previous usages concatenation. Signed-off-by: Candle Sun <candle.sun@unisoc.com> Signed-off-by: Nianfu Bai <nianfu.bai@unisoc.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Siarhei Vishniakou <svv@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05ext4: add more paranoia checking in ext4_expand_extra_isize handlingTheodore Ts'o2-9/+27
commit 4ea99936a1630f51fc3a2d61a58ec4a1c4b7d55a upstream. It's possible to specify a non-zero s_want_extra_isize via debugging option, and this can cause bad things(tm) to happen when using a file system with an inode size of 128 bytes. Add better checking when the file system is mounted, as well as when we are actually doing the trying to do the inode expansion. Link: https://lore.kernel.org/r/20191110121510.GH23325@mit.edu Reported-by: syzbot+f8d6f8386ceacdbfff57@syzkaller.appspotmail.com Reported-by: syzbot+33d7ea72e47de3bdf4e1@syzkaller.appspotmail.com Reported-by: syzbot+44b6763edfc17144296f@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05selftests: pmtu: use -oneline for ip route list cacheThadeu Lima de Souza Cascardo1-3/+2
[ Upstream commit 2745aea6750ff0d2c48285d25bdb00e5b636ec8b ] Some versions of iproute2 will output more than one line per entry, which will cause the test to fail, like: TEST: ipv6: list and flush cached exceptions [FAIL] can't list cached exceptions That happens, for example, with iproute2 4.15.0. When using the -oneline option, this will work just fine: TEST: ipv6: list and flush cached exceptions [ OK ] This also works just fine with a more recent version of iproute2, like 5.4.0. For some reason, two lines are printed for the IPv4 test no matter what version of iproute2 is used. Use the same -oneline parameter there instead of counting the lines twice. Fixes: b964641e9925 ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05tipc: fix link name length checkJohn Rutherford1-2/+2
[ Upstream commit fd567ac20cb0377ff466d3337e6e9ac5d0cb15e4 ] In commit 4f07b80c9733 ("tipc: check msg->req data len in tipc_nl_compat_bearer_disable") the same patch code was copied into routines: tipc_nl_compat_bearer_disable(), tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats(). The two link routine occurrences should have been modified to check the maximum link name length and not bearer name length. Fixes: 4f07b80c9733 ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable") Signed-off-by: John Rutherford <john.rutherford@dektech.com.au> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05selftests: bpf: correct perror stringsJakub Kicinski2-20/+20
[ Upstream commit e5dc9dd3258098bf8b5ceb75fc3433b41eff618a ] perror(str) is basically equivalent to print("%s: %s\n", str, strerror(errno)). New line or colon at the end of str is a mistake/breaks formatting. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05selftests: bpf: test_sockmap: handle file creation failures gracefullyJakub Kicinski1-0/+9
[ Upstream commit 4b67c515036313f3c3ecba3cb2babb9cbddb3f85 ] test_sockmap creates a temporary file to use for sendpage. this may fail for various reasons. Handle the error rather than segfault. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net/tls: use sg_next() to walk sg entriesJakub Kicinski3-13/+5
[ Upstream commit c5daa6cccdc2f94aca2c9b3fa5f94e4469997293 ] Partially sent record cleanup path increments an SG entry directly instead of using sg_next(). This should not be a problem today, as encrypted messages should be always allocated as arrays. But given this is a cleanup path it's easy to miss was this ever to change. Use sg_next(), and simplify the code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net/tls: remove the dead inplace_crypto codeJakub Kicinski2-6/+1
[ Upstream commit 9e5ffed37df68d0ccfb2fdc528609e23a1e70ebe ] Looks like when BPF support was added by commit d3b18ad31f93 ("tls: add bpf support to sk_msg handling") and commit d829e9c4112b ("tls: convert to generic sk_msg interface") it broke/removed the support for in-place crypto as added by commit 4e6d47206c32 ("tls: Add support for inplace records encryption"). The inplace_crypto member of struct tls_rec is dead, inited to zero, and sometimes set to zero again. It used to be set to 1 when record was allocated, but the skmsg code doesn't seem to have been written with the idea of in-place crypto in mind. Since non trivial effort is required to bring the feature back and we don't really have the HW to measure the benefit just remove the left over support for now to avoid confusing readers. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05selftests/tls: add a test for fragmented messagesJakub Kicinski1-0/+60
[ Upstream commit 65190f77424d7b82c4aad7326c9cce6bd91a2fcc ] Add a sendmsg test with very fragmented messages. This should fill up sk_msg and test the boundary conditions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net: skmsg: fix TLS 1.3 crash with full sk_msgJakub Kicinski4-19/+19
[ Upstream commit 031097d9e079e40dce401031d1012e83d80eaf01 ] TLS 1.3 started using the entry at the end of the SG array for chaining-in the single byte content type entry. This mostly works: [ E E E E E E . . ] ^ ^ start end E < content type / [ E E E E E E C . ] ^ ^ start end (Where E denotes a populated SG entry; C denotes a chaining entry.) If the array is full, however, the end will point to the start: [ E E E E E E E E ] ^ start end And we end up overwriting the start: E < content type / [ C E E E E E E E ] ^ start end The sg array is supposed to be a circular buffer with start and end markers pointing anywhere. In case where start > end (i.e. the circular buffer has "wrapped") there is an extra entry reserved at the end to chain the two halves together. [ E E E E E E . . l ] (Where l is the reserved entry for "looping" back to front. As suggested by John, let's reserve another entry for chaining SG entries after the main circular buffer. Note that this entry has to be pointed to by the end entry so its position is not fixed. Examples of full messages: [ E E E E E E E E . l ] ^ ^ start end <---------------. [ E E . E E E E E E l ] ^ ^ end start Now the end will always point to an unused entry, so TLS 1.3 can always use it. Fixes: 130b392c6cd6 ("net: tls: Add tls 1.3 support") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net/tls: free the record on encryption errorJakub Kicinski1-2/+8
[ Upstream commit d10523d0b3d78153ee58d19853ced26c9004c8c4 ] When tls_do_encryption() fails the SG lists are left with the SG_END and SG_CHAIN marks in place. One could hope that once encryption fails we will never see the record again, but that is in fact not true. Commit d3b18ad31f93 ("tls: add bpf support to sk_msg handling") added special handling to ENOMEM and ENOSPC errors which mean we may see the same record re-submitted. As suggested by John free the record, the BPF code is already doing just that. Reported-by: syzbot+df0d4ec12332661dd1f9@syzkaller.appspotmail.com Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net/tls: take into account that bpf_exec_tx_verdict() may free the recordJakub Kicinski1-5/+8
[ Upstream commit c329ef9684de9517d82af5b4758c9e1b64a8a11a ] bpf_exec_tx_verdict() may free the record if tls_push_record() fails, or if the entire record got consumed by BPF. Re-check ctx->open_rec before touching the data. Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05openvswitch: remove another BUG_ON()Paolo Abeni1-1/+5
[ Upstream commit 8a574f86652a4540a2433946ba826ccb87f398cc ] If we can't build the flow del notification, we can simply delete the flow, no need to crash the kernel. Still keep a WARN_ON to preserve debuggability. Note: the BUG_ON() predates the Fixes tag, but this change can be applied only after the mentioned commit. v1 -> v2: - do not leak an skb on error Fixes: aed067783e50 ("openvswitch: Minimize ovs_flow_cmd_del critical section.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()Paolo Abeni1-1/+4
[ Upstream commit 8ffeb03fbba3b599690b361467bfd2373e8c450f ] All the callers of ovs_flow_cmd_build_info() already deal with error return code correctly, so we can handle the error condition in a more gracefull way. Still dump a warning to preserve debuggability. v1 -> v2: - clarify the commit message - clean the skb and report the error (DaveM) Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05sctp: cache netns in sctp_ep_commonXin Long4-2/+7
[ Upstream commit 312434617cb16be5166316cf9d08ba760b1042a1 ] This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05slip: Fix use-after-free Read in slip_openJouni Hogander1-0/+1
[ Upstream commit e58c1912418980f57ba2060017583067f5f71e52 ] Slip_open doesn't clean-up device which registration failed from the slip_devs device list. On next open after failure this list is iterated and freed device is accessed. Fix this by calling sl_free_netdev in error path. Here is the trace from the Syzbot: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3b5a39979daf ("slip: Fix memory leak in slip_open error path") Reported-by: syzbot+4d5170758f3762109542@syzkaller.appspotmail.com Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcookNavid Emamdoost1-1/+3
[ Upstream commit b6631c6031c746ed004c4221ec0616d7a520f441 ] In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated new_asoc is leaked if security_sctp_assoc_request() fails. Release it via sctp_association_free(). Fixes: 2277c7cd75e3 ("sctp: Add LSM hooks") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05openvswitch: fix flow command message sizePaolo Abeni1-1/+5
[ Upstream commit 4e81c0b3fa93d07653e2415fa71656b080a112fd ] When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant flow has no UFID, we can exceed the computed size, as ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY attribute. Take the above in account when computing the flow command message size. Fixes: 74ed7ab9264c ("openvswitch: Add support for unique flow IDs.") Reported-by: Qi Jun Ding <qding@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net: sched: fix `tc -s class show` no bstats on class with nolock subqueuesDust Li4-5/+6
[ Upstream commit 14e54ab9143fa60794d13ea0a66c792a2046a8f3 ] When a classful qdisc's child qdisc has set the flag TCQ_F_CPUSTATS (pfifo_fast for example), the child qdisc's cpu_bstats should be passed to gnet_stats_copy_basic(), but many classful qdisc didn't do that. As a result, `tc -s class show dev DEV` always return 0 for bytes and packets in this case. Pass the child qdisc's cpu_bstats to gnet_stats_copy_basic() to fix this issue. The qstats also has this problem, but it has been fixed in 5dd431b6b9 ("net: sched: introduce and use qstats read...") and bstats still remains buggy. Fixes: 22e0f8b9322c ("net: sched: make bstats per cpu and estimator RCU safe") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net: psample: fix skb_over_panicNikolay Aleksandrov1-1/+1
[ Upstream commit 7eb9d7675c08937cd11d32b0b40442d4d731c5ee ] We need to calculate the skb size correctly otherwise we risk triggering skb_over_panic[1]. The issue is that data_len is added to the skb in a nl attribute, but we don't account for its header size (nlattr 4 bytes) and alignment. We account for it when calculating the total size in the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when allocating after that. The fix is simple - use nla_total_size() for data_len when allocating. To reproduce: $ tc qdisc add dev eth1 clsact $ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129 $ mausezahn eth1 -b bcast -a rand -c 1 -p 129 < skb_over_panic BUG(), tail is 4 bytes past skb->end > [1] Trace: [ 50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL> [ 50.474339][ T3480] ------------[ cut here ]------------ [ 50.481132][ T3480] kernel BUG at net/core/skbuff.c:108! [ 50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP [ 50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 #108 [ 50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b [ 50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22 [ 50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282 [ 50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000 [ 50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff [ 50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000 [ 50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0 [ 50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084 [ 50.515222][ T3480] FS: 00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000 [ 50.517135][ T3480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0 [ 50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 50.524450][ T3480] Call Trace: [ 50.525214][ T3480] skb_put.cold+0x1b/0x1b [ 50.526171][ T3480] psample_sample_packet+0x1d3/0x340 [ 50.527307][ T3480] tcf_sample_act+0x178/0x250 [ 50.528339][ T3480] tcf_action_exec+0xb1/0x190 [ 50.529354][ T3480] mall_classify+0x67/0x90 [ 50.530332][ T3480] tcf_classify+0x72/0x160 [ 50.531286][ T3480] __dev_queue_xmit+0x3db/0xd50 [ 50.532327][ T3480] dev_queue_xmit+0x18/0x20 [ 50.533299][ T3480] packet_sendmsg+0xee7/0x2090 [ 50.534331][ T3480] sock_sendmsg+0x54/0x70 [ 50.535271][ T3480] __sys_sendto+0x148/0x1f0 [ 50.536252][ T3480] ? tomoyo_file_ioctl+0x23/0x30 [ 50.537334][ T3480] ? ksys_ioctl+0x5e/0xb0 [ 50.540068][ T3480] __x64_sys_sendto+0x2a/0x30 [ 50.542810][ T3480] do_syscall_64+0x73/0x1f0 [ 50.545383][ T3480] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 50.548477][ T3480] RIP: 0033:0x7f35357d6fb3 [ 50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24 [ 50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3 [ 50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003 [ 50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014 [ 50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082 [ 50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003 [ 50.578170][ T3480] Modules linked in: sch_ingress virtio_net [ 50.580976][ T3480] ---[ end trace 61a515626a595af6 ]--- CC: Yotam Gigi <yotamg@mellanox.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Simon Horman <simon.horman@netronome.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net: macb: add missed tasklet_killChuhong Yuan1-0/+1
[ Upstream commit 61183b056b49e2937ff92a1424291ba36a6f6d05 ] This driver forgets to kill tasklet in remove. Add the call to fix it. Fixes: 032dc41ba6e2 ("net: macb: Handle HRESP error") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05net: dsa: sja1105: fix sja1105_parse_rgmii_delays()Oleksij Rempel1-5/+5
[ Upstream commit 9bca3a0a923fc3f0fb9e41391be1d0f291e86858 ] This function was using configuration of port 0 in devicetree for all ports. In case CPU port was not 0, the delay settings was ignored. This resulted not working communication between CPU and the switch. Fixes: f5b8631c293b ("net: dsa: sja1105: Error out if RGMII delays are requested in DT") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05mdio_bus: don't use managed reset-controllerDavid Bauer1-2/+4
[ Upstream commit 32085f25d7b68404055f3525c780142fc72e543f ] Geert Uytterhoeven reported that using devm_reset_controller_get leads to a WARNING when probing a reset-controlled PHY. This is because the device devm_reset_controller_get gets supplied is not actually the one being probed. Acquire an unmanaged reset-control as well as free the reset_control on unregister to fix this. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05macvlan: schedule bc_work even if errorMenglong Dong1-1/+2
[ Upstream commit 1d7ea55668878bb350979c377fc72509dd6f5b21 ] While enqueueing a broadcast skb to port->bc_queue, schedule_work() is called to add port->bc_work, which processes the skbs in bc_queue, to "events" work queue. If port->bc_queue is full, the skb will be discarded and schedule_work(&port->bc_work) won't be called. However, if port->bc_queue is full and port->bc_work is not running or pending, port->bc_queue will keep full and schedule_work() won't be called any more, and all broadcast skbs to macvlan will be discarded. This case can happen: macvlan_process_broadcast() is the pending function of port->bc_work, it moves all the skbs in port->bc_queue to the queue "list", and processes the skbs in "list". During this, new skbs will keep being added to port->bc_queue in macvlan_broadcast_enqueue(), and port->bc_queue may already full when macvlan_process_broadcast() return. This may happen, especially when there are a lot of real-time threads and the process is preempted. Fix this by calling schedule_work(&port->bc_work) even if port->bc_work is full in macvlan_broadcast_enqueue(). Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05gve: Fix the queue page list allocated pages countJeroen de Borst1-1/+2
[ Upstream commit a95069ecb7092d03b2ea1c39ee04514fe9627540 ] In gve_alloc_queue_page_list(), when a page allocation fails, qpl->num_entries will be wrong. In this case priv->num_registered_pages can underflow in gve_free_queue_page_list(), causing subsequent calls to gve_alloc_queue_page_list() to fail. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05x86/fpu: Don't cache access to fpu_fpregs_owner_ctxSebastian Andrzej Siewior1-1/+1
commit 59c4bd853abcea95eccc167a7d7fd5f1a5f47b98 upstream. The state/owner of the FPU is saved to fpu_fpregs_owner_ctx by pointing to the context that is currently loaded. It never changed during the lifetime of a task - it remained stable/constant. After deferred FPU registers loading until return to userland was implemented, the content of fpu_fpregs_owner_ctx may change during preemption and must not be cached. This went unnoticed for some time and was now noticed, in particular since gcc 9 is caching that load in copy_fpstate_to_sigframe() and reusing it in the retry loop: copy_fpstate_to_sigframe() load fpu_fpregs_owner_ctx and save on stack fpregs_lock() copy_fpregs_to_sigframe() /* failed */ fpregs_unlock() *** PREEMPTION, another uses FPU, changes fpu_fpregs_owner_ctx *** fault_in_pages_writeable() /* succeed, retry */ fpregs_lock() __fpregs_load_activate() fpregs_state_valid() /* uses fpu_fpregs_owner_ctx from stack */ copy_fpregs_to_sigframe() /* succeeds, random FPU content */ This is a comparison of the assembly produced by gcc 9, without vs with this patch: | # arch/x86/kernel/fpu/signal.c:173: if (!access_ok(buf, size)) | cmpq %rdx, %rax # tmp183, _4 | jb .L190 #, |-# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read_stable(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu; |-#APP |-# 512 "arch/x86/include/asm/fpu/internal.h" 1 |- movq %gs:fpu_fpregs_owner_ctx,%rax #, pfo_ret__ |-# 0 "" 2 |-#NO_APP |- movq %rax, -88(%rbp) # pfo_ret__, %sfp … |-# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read_stable(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu; |- movq -88(%rbp), %rcx # %sfp, pfo_ret__ |- cmpq %rcx, -64(%rbp) # pfo_ret__, %sfp |+# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu; |+#APP |+# 512 "arch/x86/include/asm/fpu/internal.h" 1 |+ movq %gs:fpu_fpregs_owner_ctx(%rip),%rax # fpu_fpregs_owner_ctx, pfo_ret__ |+# 0 "" 2 |+# arch/x86/include/asm/fpu/internal.h:512: return fpu == this_cpu_read(fpu_fpregs_owner_ctx) && cpu == fpu->last_cpu; |+#NO_APP |+ cmpq %rax, -64(%rbp) # pfo_ret__, %sfp Use this_cpu_read() instead this_cpu_read_stable() to avoid caching of fpu_fpregs_owner_ctx during preemption points. The Fixes: tag points to the commit where deferred FPU loading was added. Since this commit, the compiler is no longer allowed to move the load of fpu_fpregs_owner_ctx somewhere else / outside of the locked section. A task preemption will change its value and stale content will be observed. [ bp: Massage. ] Debugged-by: Austin Clements <austin@google.com> Debugged-by: David Chase <drchase@golang.org> Debugged-by: Ian Lance Taylor <ian@airs.com> Fixes: 5f409e20b7945 ("x86/fpu: Defer FPU state load until return to userspace") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Rik van Riel <riel@surriel.com> Tested-by: Borislav Petkov <bp@suse.de> Cc: Aubrey Li <aubrey.li@intel.com> Cc: Austin Clements <austin@google.com> Cc: Barret Rhoden <brho@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Chase <drchase@golang.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: ian@airs.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Bleecher Snyder <josharian@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191128085306.hxfa2o3knqtu4wfn@linutronix.de Link: https://bugzilla.kernel.org/show_bug.cgi?id=205663 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05xfrm: Fix memleak on xfrm state destroySteffen Klassert1-0/+2
commit 86c6739eda7d2a03f2db30cbee67a5fb81afa8ba upstream. We leak the page that we use to create skb page fragments when destroying the xfrm_state. Fix this by dropping a page reference if a page was assigned to the xfrm_state. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: JD <jdtxs00@gmail.com> Reported-by: Paul Wouters <paul@nohats.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05thunderbolt: Power cycle the router if NVM authentication failsMika Westerberg1-12/+42
commit 7a7ebfa85f4fac349f3ab219538c44efe18b0cf6 upstream. On zang's Dell XPS 13 9370 after Thunderbolt NVM firmware upgrade the Thunderbolt controller did not come back as expected. Only after the system was rebooted it became available again. It is not entirely clear what happened but I suspect the new NVM firmware image authentication failed for some reason. Regardless of this the router needs to be power cycled if NVM authentication fails in order to get it fully functional again. This modifies the driver to issue a power cycle in case the NVM authentication fails immediately when dma_port_flash_update_auth() returns. We also need to call tb_switch_set_uuid() earlier to be able to fetch possible NVM authentication failure when DMA port is added. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205457 Reported-by: zang <dump@tzib.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05mei: me: add comet point V device idAlexander Usyskin2-0/+2
commit 82b29b9f72afdccb40ea5f3c13c6a3cb65a597bc upstream. Comet Point (Comet Lake) V device id. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191105150514.14010-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05mei: bus: prefix device names on bus with the bus nameAlexander Usyskin1-4/+5
commit 7a2b9e6ec84588b0be65cc0ae45a65bac431496b upstream. Add parent device name to the name of devices on bus to avoid device names collisions for same client UUID available from different MEI heads. Namely this prevents sysfs collision under /sys/bus/mei/device/ In the device part leave just UUID other parameters that are required for device matching are not required here and are just bloating the name. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191105150514.14010-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9PFabio D'Urso2-0/+10
commit c1a1f273d0825774c80896b8deb1c9ea1d0b91e3 upstream. This device presents itself as a USB hub with three attached devices: - An ACM serial port connected to the GPS module (not affected by this commit) - An FTDI serial port connected to the GPS module (1546:0502) - Another FTDI serial port connected to the ODIN-W2 radio module (1546:0503) This commit registers U-Blox's VID and the PIDs of the second and third devices. Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdf Signed-off-by: Fabio D'Urso <fabiodurso@hotmail.it> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: rtl8723bs: Add 024c:0525 to the list of SDIO device-idsHans de Goede1-0/+1
commit 3d5f1eedbfd22ceea94b39989d6021b1958181f4 upstream. Add 024c:0525 to the list of SDIO device-ids, based on a patch found in the Android X86 kernels. According to that patch this device id is used on the Alcatel Plus 10 device. Reported-and-tested-by: youling257 <youling257@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111113846.24940-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: rtl8723bs: Drop ACPI device idsHans de Goede1-6/+0
commit 2d9d2491530a156b9a5614adf9dc79285e35d55e upstream. The driver only binds by SDIO device-ids, all the ACPI device-id does is causing the driver to load unnecessarily on devices where the DSDT contains a bogus OBDA8723 device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111113846.24940-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: rtl8192e: fix potential use after freePan Bian1-2/+3
commit b7aa39a2ed0112d07fc277ebd24a08a7b2368ab9 upstream. The variable skb is released via kfree_skb() when the return value of _rtl92e_tx is not zero. However, after that, skb is accessed again to read its length, which may result in a use after free bug. This patch fixes the bug by moving the release operation to where skb is never used later. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1572965351-6745-1-git-send-email-bianpan2016@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05staging: wilc1000: fix illegal memory access in wilc_parse_join_bss_param()Ajay Singh1-10/+15
commit c7e621bb981b76d3bfd8a595070ee8282ac4a32b upstream. Do not copy the extended supported rates in 'param->supp_rates' if the array is already full with basic rates values. The array size check helped to avoid possible illegal memory access [1] while copying to 'param->supp_rates' array. 1. https://marc.info/?l=linux-next&m=157301720517456&w=2 Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1487400 ("Memory - illegal accesses") Fixes: 4e0b0f42c9c7 ("staging: wilc1000: use struct to pack join parameters for FW") Cc: stable@vger.kernel.org Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Link: https://lore.kernel.org/r/20191106062127.3165-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05usb: dwc2: use a longer core rest timeout in dwc2_core_reset()Mathias Kresin1-1/+1
commit 6689f0f4bb14e50917ba42eb9b41c25e0184970c upstream. Testing on different generations of Lantiq MIPS SoC based boards, showed that it takes up to 1500 us until the core reset bit is cleared. The driver from the vendor SDK (ifxhcd) uses a 1 second timeout. Use the same timeout to fix wrong hang detections and make the driver work for Lantiq MIPS SoCs. At least till kernel 4.14 the hanging reset only caused a warning but the driver was probed successful. With kernel 4.19 errors out with EBUSY. Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05clk: at91: fix update bit maps on CFG_MOR writeEugen Hristev1-1/+1
commit 263eaf8f172d9f44e15d6aca85fe40ec18d2c477 upstream. The regmap update bits call was not selecting the proper mask, considering the bits which was updating. Update the mask from call to also include OSCBYPASS. Removed MOSCEN which was not updated. Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05i40e: Fix for ethtool -m issue on X722 NICArkadiusz Kubalewski1-1/+2
[ Upstream commit 4c9da6f2b8a029052c75bd4a61ae229135831177 ] This patch contains fix for a problem with command: 'ethtool -m <dev>' which breaks functionality of: 'ethtool <dev>' when called on X722 NIC Disallowed update of link phy_types on X722 NIC Currently correct value cannot be obtained from FW Previously wrong value returned by FW was used and was a root cause for incorrect output of 'ethtool <dev>' command Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05iavf: initialize ITRN registers with correct valuesNicholas Nunley1-2/+2
[ Upstream commit 4eda4e0096842764d725bcfd77471a419832b074 ] Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg value for ITR defines") the driver tracks the interrupt throttling intervals in single usec units, although the actual ITRN registers are programmed in 2 usec units. Most register programming flows in the driver correctly handle the conversion, although it is currently not applied when the registers are initialized to their default values. Most of the time this doesn't present a problem since the default values are usually immediately overwritten through the standard adaptive throttling mechanism, or updated manually by the user, but if adaptive throttling is disabled and the interval values are left alone then the incorrect value will persist. Since the intended default interval of 50 usecs (vs. 100 usecs as programmed) performs better for most traffic workloads, this can lead to performance regressions. This patch adds the correct conversion when writing the initial values to the ITRN registers. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05ice: fix potential infinite loop because loop counter being too smallColin Ian King1-1/+1
[ Upstream commit 615457a226f042bffc3a1532afb244cab37460d4 ] Currently the for-loop counter i is a u8 however it is being checked against a maximum value hw->num_tx_sched_layers which is a u16. Hence there is a potential wrap-around of counter i back to zero if hw->num_tx_sched_layers is greater than 255. Fix this by making i a u16. Addresses-Coverity: ("Infinite loop") Fixes: b36c598c999c ("ice: Updates to Tx scheduler code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05pwm: bcm-iproc: Prevent unloading the driver module while in useUwe Kleine-König1-0/+1
[ Upstream commit 24906a41eecb73d51974ade0847c21e429beec60 ] The owner member of struct pwm_ops must be set to THIS_MODULE to increase the reference count of the module such that the module cannot be removed while its code is in use. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05block: drbd: remove a stray unlock in __drbd_send_protocol()Dan Carpenter1-1/+0
[ Upstream commit 8e9c523016cf9983b295e4bc659183d1fa6ef8e0 ] There are two callers of this function and they both unlock the mutex so this ends up being a double unlock. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05mac80211: fix station inactive_time shortly after bootAhmed Zaki1-1/+2
[ Upstream commit 285531f9e6774e3be71da6673d475ff1a088d675 ] In the first 5 minutes after boot (time of INITIAL_JIFFIES), ieee80211_sta_last_active() returns zero if last_ack is zero. This leads to "inactive time" showing jiffies_to_msecs(jiffies). # iw wlan0 station get fc:ec:da:64:a6:dd Station fc:ec:da:64:a6:dd (on wlan0) inactive time: 4294894049 ms . . connected time: 70 seconds Fix by returning last_rx if last_ack == 0. Signed-off-by: Ahmed Zaki <anzaki@gmail.com> Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-10 14:12:04 +0300