summaryrefslogtreecommitdiff
path: root/arch/mips/cavium-octeon/octeon-usb.c
blob: 950e6c6e862973b421393f9afcc02f9fdb1f3f0f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
/*
 * XHCI HCD glue for Cavium Octeon III SOCs.
 *
 * Copyright (C) 2010-2017 Cavium Networks
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 */

#include <linux/module.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/of_platform.h>
#include <linux/io.h>

#include <asm/octeon/octeon.h>

/* USB Control Register */
union cvm_usbdrd_uctl_ctl {
	uint64_t u64;
	struct cvm_usbdrd_uctl_ctl_s {
	/* 1 = BIST and set all USB RAMs to 0x0, 0 = BIST */
	__BITFIELD_FIELD(uint64_t clear_bist:1,
	/* 1 = Start BIST and cleared by hardware */
	__BITFIELD_FIELD(uint64_t start_bist:1,
	/* Reference clock select for SuperSpeed and HighSpeed PLLs:
	 *	0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock
	 *	0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock
	 *	0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock &
	 *	      HighSpeed PLL uses PLL_REF_CLK for reference clck
	 *	0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock &
	 *	      HighSpeed PLL uses PLL_REF_CLK for reference clck
	 */
	__BITFIELD_FIELD(uint64_t ref_clk_sel:2,
	/* 1 = Spread-spectrum clock enable, 0 = SS clock disable */
	__BITFIELD_FIELD(uint64_t ssc_en:1,
	/* Spread-spectrum clock modulation range:
	 *	0x0 = -4980 ppm downspread
	 *	0x1 = -4492 ppm downspread
	 *	0x2 = -4003 ppm downspread
	 *	0x3 - 0x7 = Reserved
	 */
	__BITFIELD_FIELD(uint64_t ssc_range:3,
	/* Enable non-standard oscillator frequencies:
	 *	[55:53] = modules -1
	 *	[52:47] = 2's complement push amount, 0 = Feature disabled
	 */
	__BITFIELD_FIELD(uint64_t ssc_ref_clk_sel:9,
	/* Reference clock multiplier for non-standard frequencies:
	 *	0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
	 *	0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
	 *	0x32 =  50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
	 *	Other Values = Reserved
	 */
	__BITFIELD_FIELD(uint64_t mpll_multiplier:7,
	/* Enable reference clock to prescaler for SuperSpeed functionality.
	 * Should always be set to "1"
	 */
	__BITFIELD_FIELD(uint64_t ref_ssp_en:1,
	/* Divide the reference clock by 2 before entering the
	 * REF_CLK_FSEL divider:
	 *	If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal
	 *	If REF_CLK_SEL = 0x2 or 0x3, then:
	 *		0x1 = DLMC_REF_CLK* is 125MHz
	 *		0x0 = DLMC_REF_CLK* is another supported frequency
	 */
	__BITFIELD_FIELD(uint64_t ref_clk_div2:1,
	/* Select reference clock freqnuency for both PLL blocks:
	 *	0x27 = REF_CLK_SEL is 0x0 or 0x1
	 *	0x07 = REF_CLK_SEL is 0x2 or 0x3
	 */
	__BITFIELD_FIELD(uint64_t ref_clk_fsel:6,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_31_31:1,
	/* Controller clock enable. */
	__BITFIELD_FIELD(uint64_t h_clk_en:1,
	/* Select bypass input to controller clock divider:
	 *	0x0 = Use divided coprocessor clock from H_CLKDIV
	 *	0x1 = Use clock from GPIO pins
	 */
	__BITFIELD_FIELD(uint64_t h_clk_byp_sel:1,
	/* Reset controller clock divider. */
	__BITFIELD_FIELD(uint64_t h_clkdiv_rst:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_27_27:1,
	/* Clock divider select:
	 *	0x0 = divide by 1
	 *	0x1 = divide by 2
	 *	0x2 = divide by 4
	 *	0x3 = divide by 6
	 *	0x4 = divide by 8
	 *	0x5 = divide by 16
	 *	0x6 = divide by 24
	 *	0x7 = divide by 32
	 */
	__BITFIELD_FIELD(uint64_t h_clkdiv_sel:3,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_22_23:2,
	/* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */
	__BITFIELD_FIELD(uint64_t usb3_port_perm_attach:1,
	/* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */
	__BITFIELD_FIELD(uint64_t usb2_port_perm_attach:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_19_19:1,
	/* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */
	__BITFIELD_FIELD(uint64_t usb3_port_disable:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_17_17:1,
	/* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */
	__BITFIELD_FIELD(uint64_t usb2_port_disable:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_15_15:1,
	/* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */
	__BITFIELD_FIELD(uint64_t ss_power_en:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_13_13:1,
	/* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */
	__BITFIELD_FIELD(uint64_t hs_power_en:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_5_11:7,
	/* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */
	__BITFIELD_FIELD(uint64_t csclk_en:1,
	/* Controller mode: 0x0 = Host, 0x1 = Device */
	__BITFIELD_FIELD(uint64_t drd_mode:1,
	/* PHY reset */
	__BITFIELD_FIELD(uint64_t uphy_rst:1,
	/* Software reset UAHC */
	__BITFIELD_FIELD(uint64_t uahc_rst:1,
	/* Software resets UCTL */
	__BITFIELD_FIELD(uint64_t uctl_rst:1,
	;)))))))))))))))))))))))))))))))))
	} s;
};

/* UAHC Configuration Register */
union cvm_usbdrd_uctl_host_cfg {
	uint64_t u64;
	struct cvm_usbdrd_uctl_host_cfg_s {
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_60_63:4,
	/* Indicates minimum value of all received BELT values */
	__BITFIELD_FIELD(uint64_t host_current_belt:12,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_38_47:10,
	/* HS jitter adjustment */
	__BITFIELD_FIELD(uint64_t fla:6,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_29_31:3,
	/* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */
	__BITFIELD_FIELD(uint64_t bme:1,
	/* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */
	__BITFIELD_FIELD(uint64_t oci_en:1,
	/* Overcurrent sene selection:
	 *	0x0 = Overcurrent indication from off-chip is active-low
	 *	0x1 = Overcurrent indication from off-chip is active-high
	 */
	__BITFIELD_FIELD(uint64_t oci_active_high_en:1,
	/* Port power control enable: 0x0 = unavailable, 0x1 = available */
	__BITFIELD_FIELD(uint64_t ppc_en:1,
	/* Port power control sense selection:
	 *	0x0 = Port power to off-chip is active-low
	 *	0x1 = Port power to off-chip is active-high
	 */
	__BITFIELD_FIELD(uint64_t ppc_active_high_en:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_0_23:24,
	;)))))))))))
	} s;
};

/* UCTL Shim Features Register */
union cvm_usbdrd_uctl_shim_cfg {
	uint64_t u64;
	struct cvm_usbdrd_uctl_shim_cfg_s {
	/* Out-of-bound UAHC register access: 0 = read, 1 = write */
	__BITFIELD_FIELD(uint64_t xs_ncb_oob_wrn:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_60_62:3,
	/* SRCID error log for out-of-bound UAHC register access:
	 *	[59:58] = chipID
	 *	[57] = Request source: 0 = core, 1 = NCB-device
	 *	[56:51] = Core/NCB-device number, [56] always 0 for NCB devices
	 *	[50:48] = SubID
	 */
	__BITFIELD_FIELD(uint64_t xs_ncb_oob_osrc:12,
	/* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */
	__BITFIELD_FIELD(uint64_t xm_bad_dma_wrn:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_44_46:3,
	/* Encoded error type for bad UAHC DMA */
	__BITFIELD_FIELD(uint64_t xm_bad_dma_type:4,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_13_39:27,
	/* Select the IOI read command used by DMA accesses */
	__BITFIELD_FIELD(uint64_t dma_read_cmd:1,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_10_11:2,
	/* Select endian format for DMA accesses to the L2c:
	 *	0x0 = Little endian
	 *`	0x1 = Big endian
	 *	0x2 = Reserved
	 *	0x3 = Reserved
	 */
	__BITFIELD_FIELD(uint64_t dma_endian_mode:2,
	/* Reserved */
	__BITFIELD_FIELD(uint64_t reserved_2_7:6,
	/* Select endian format for IOI CSR access to UAHC:
	 *	0x0 = Little endian
	 *`	0x1 = Big endian
	 *	0x2 = Reserved
	 *	0x3 = Reserved
	 */
	__BITFIELD_FIELD(uint64_t csr_endian_mode:2,
	;))))))))))))
	} s;
};

#define OCTEON_H_CLKDIV_SEL		8
#define OCTEON_MIN_H_CLK_RATE		150000000
#define OCTEON_MAX_H_CLK_RATE		300000000

static DEFINE_MUTEX(dwc3_octeon_clocks_mutex);
static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};


static int dwc3_octeon_config_power(struct device *dev, u64 base)
{
#define UCTL_HOST_CFG	0xe0
	union cvm_usbdrd_uctl_host_cfg uctl_host_cfg;
	union cvmx_gpio_bit_cfgx gpio_bit;
	uint32_t gpio_pwr[3];
	int gpio, len, power_active_low;
	struct device_node *node = dev->of_node;
	int index = (base >> 24) & 1;

	if (of_find_property(node, "power", &len) != NULL) {
		if (len == 12) {
			of_property_read_u32_array(node, "power", gpio_pwr, 3);
			power_active_low = gpio_pwr[2] & 0x01;
			gpio = gpio_pwr[1];
		} else if (len == 8) {
			of_property_read_u32_array(node, "power", gpio_pwr, 2);
			power_active_low = 0;
			gpio = gpio_pwr[1];
		} else {
			dev_err(dev, "dwc3 controller clock init failure.\n");
			return -EINVAL;
		}
		if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
		    OCTEON_IS_MODEL(OCTEON_CNF75XX))
		    && gpio <= 31) {
			gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio));
			gpio_bit.s.tx_oe = 1;
			gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x15);
			cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64);
		} else if (gpio <= 15) {
			gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio));
			gpio_bit.s.tx_oe = 1;
			gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19);
			cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64);
		} else {
			gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio));
			gpio_bit.s.tx_oe = 1;
			gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19);
			cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64);
		}

		/* Enable XHCI power control and set if active high or low. */
		uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
		uctl_host_cfg.s.ppc_en = 1;
		uctl_host_cfg.s.ppc_active_high_en = !power_active_low;
		cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
	} else {
		/* Disable XHCI power control and set if active high. */
		uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
		uctl_host_cfg.s.ppc_en = 0;
		uctl_host_cfg.s.ppc_active_high_en = 0;
		cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
		dev_warn(dev, "dwc3 controller clock init failure.\n");
	}
	return 0;
}

static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
{
	union cvm_usbdrd_uctl_ctl uctl_ctl;
	int ref_clk_sel = 2;
	u64 div;
	u32 clock_rate;
	int mpll_mul;
	int i;
	u64 h_clk_rate;
	u64 uctl_ctl_reg = base;

	if (dev->of_node) {
		const char *ss_clock_type;
		const char *hs_clock_type;

		i = of_property_read_u32(dev->of_node,
					 "refclk-frequency", &clock_rate);
		if (i) {
			pr_err("No UCTL \"refclk-frequency\"\n");
			return -EINVAL;
		}
		i = of_property_read_string(dev->of_node,
					    "refclk-type-ss", &ss_clock_type);
		if (i) {
			pr_err("No UCTL \"refclk-type-ss\"\n");
			return -EINVAL;
		}
		i = of_property_read_string(dev->of_node,
					    "refclk-type-hs", &hs_clock_type);
		if (i) {
			pr_err("No UCTL \"refclk-type-hs\"\n");
			return -EINVAL;
		}
		if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
			if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0)
				ref_clk_sel = 0;
			else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
				ref_clk_sel = 2;
			else
				pr_err("Invalid HS clock type %s, using  pll_ref_clk instead\n",
				       hs_clock_type);
		} else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
			if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
				ref_clk_sel = 1;
			else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
				ref_clk_sel = 3;
			else {
				pr_err("Invalid HS clock type %s, using  pll_ref_clk instead\n",
				       hs_clock_type);
				ref_clk_sel = 3;
			}
		} else
			pr_err("Invalid SS clock type %s, using  dlmc_ref_clk0 instead\n",
			       ss_clock_type);

		if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
				  (clock_rate != 100000000))
			pr_err("Invalid UCTL clock rate of %u, using 100000000 instead\n",
			       clock_rate);

	} else {
		pr_err("No USB UCTL device node\n");
		return -EINVAL;
	}

	/*
	 * Step 1: Wait for all voltages to be stable...that surely
	 *         happened before starting the kernel. SKIP
	 */

	/* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */

	/* Step 3: Assert all resets. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.uphy_rst = 1;
	uctl_ctl.s.uahc_rst = 1;
	uctl_ctl.s.uctl_rst = 1;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	/* Step 4a: Reset the clock dividers. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.h_clkdiv_rst = 1;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	/* Step 4b: Select controller clock frequency. */
	for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) {
		h_clk_rate = octeon_get_io_clock_rate() / clk_div[div];
		if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE &&
				 h_clk_rate >= OCTEON_MIN_H_CLK_RATE)
			break;
	}
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.h_clkdiv_sel = div;
	uctl_ctl.s.h_clk_en = 1;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	if ((div != uctl_ctl.s.h_clkdiv_sel) || (!uctl_ctl.s.h_clk_en)) {
		dev_err(dev, "dwc3 controller clock init failure.\n");
			return -EINVAL;
	}

	/* Step 4c: Deassert the controller clock divider reset. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.h_clkdiv_rst = 0;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	/* Step 5a: Reference clock configuration. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.ref_clk_sel = ref_clk_sel;
	uctl_ctl.s.ref_clk_fsel = 0x07;
	uctl_ctl.s.ref_clk_div2 = 0;
	switch (clock_rate) {
	default:
		dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
			clock_rate);
		fallthrough;
	case 100000000:
		mpll_mul = 0x19;
		if (ref_clk_sel < 2)
			uctl_ctl.s.ref_clk_fsel = 0x27;
		break;
	case 50000000:
		mpll_mul = 0x32;
		break;
	case 125000000:
		mpll_mul = 0x28;
		break;
	}
	uctl_ctl.s.mpll_multiplier = mpll_mul;

	/* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
	uctl_ctl.s.ssc_en = 1;

	/* Step 5c: Enable SuperSpeed. */
	uctl_ctl.s.ref_ssp_en = 1;

	/* Step 5d: Cofngiure PHYs. SKIP */

	/* Step 6a & 6b: Power up PHYs. */
	uctl_ctl.s.hs_power_en = 1;
	uctl_ctl.s.ss_power_en = 1;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	/* Step 7: Wait 10 controller-clock cycles to take effect. */
	udelay(10);

	/* Step 8a: Deassert UCTL reset signal. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.uctl_rst = 0;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	/* Step 8b: Wait 10 controller-clock cycles. */
	udelay(10);

	/* Steo 8c: Setup power-power control. */
	if (dwc3_octeon_config_power(dev, base)) {
		dev_err(dev, "Error configuring power.\n");
		return -EINVAL;
	}

	/* Step 8d: Deassert UAHC reset signal. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.uahc_rst = 0;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	/* Step 8e: Wait 10 controller-clock cycles. */
	udelay(10);

	/* Step 9: Enable conditional coprocessor clock of UCTL. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.csclk_en = 1;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	/*Step 10: Set for host mode only. */
	uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
	uctl_ctl.s.drd_mode = 0;
	cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);

	return 0;
}

static void __init dwc3_octeon_set_endian_mode(u64 base)
{
#define UCTL_SHIM_CFG	0xe8
	union cvm_usbdrd_uctl_shim_cfg shim_cfg;

	shim_cfg.u64 = cvmx_read_csr(base + UCTL_SHIM_CFG);
#ifdef __BIG_ENDIAN
	shim_cfg.s.dma_endian_mode = 1;
	shim_cfg.s.csr_endian_mode = 1;
#else
	shim_cfg.s.dma_endian_mode = 0;
	shim_cfg.s.csr_endian_mode = 0;
#endif
	cvmx_write_csr(base + UCTL_SHIM_CFG, shim_cfg.u64);
}

#define CVMX_USBDRDX_UCTL_CTL(index)				\
		(CVMX_ADD_IO_SEG(0x0001180068000000ull) +	\
		((index & 1) * 0x1000000ull))
static void __init dwc3_octeon_phy_reset(u64 base)
{
	union cvm_usbdrd_uctl_ctl uctl_ctl;
	int index = (base >> 24) & 1;

	uctl_ctl.u64 = cvmx_read_csr(CVMX_USBDRDX_UCTL_CTL(index));
	uctl_ctl.s.uphy_rst = 0;
	cvmx_write_csr(CVMX_USBDRDX_UCTL_CTL(index), uctl_ctl.u64);
}

static int __init dwc3_octeon_device_init(void)
{
	const char compat_node_name[] = "cavium,octeon-7130-usb-uctl";
	struct platform_device *pdev;
	struct device_node *node;
	struct resource *res;
	void __iomem *base;

	/*
	 * There should only be three universal controllers, "uctl"
	 * in the device tree. Two USB and a SATA, which we ignore.
	 */
	node = NULL;
	do {
		node = of_find_node_by_name(node, "uctl");
		if (!node)
			return -ENODEV;

		if (of_device_is_compatible(node, compat_node_name)) {
			pdev = of_find_device_by_node(node);
			if (!pdev)
				return -ENODEV;

			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
			if (res == NULL) {
				put_device(&pdev->dev);
				dev_err(&pdev->dev, "No memory resources\n");
				return -ENXIO;
			}

			/*
			 * The code below maps in the registers necessary for
			 * setting up the clocks and reseting PHYs. We must
			 * release the resources so the dwc3 subsystem doesn't
			 * know the difference.
			 */
			base = devm_ioremap_resource(&pdev->dev, res);
			if (IS_ERR(base)) {
				put_device(&pdev->dev);
				return PTR_ERR(base);
			}

			mutex_lock(&dwc3_octeon_clocks_mutex);
			dwc3_octeon_clocks_start(&pdev->dev, (u64)base);
			dwc3_octeon_set_endian_mode((u64)base);
			dwc3_octeon_phy_reset((u64)base);
			dev_info(&pdev->dev, "clocks initialized.\n");
			mutex_unlock(&dwc3_octeon_clocks_mutex);
			devm_iounmap(&pdev->dev, base);
			devm_release_mem_region(&pdev->dev, res->start,
						resource_size(res));
		}
	} while (node != NULL);

	return 0;
}
device_initcall(dwc3_octeon_device_init);

MODULE_AUTHOR("David Daney <david.daney@cavium.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("USB driver for OCTEON III SoC");