arm64: boot: Support Flat Image Tree

Add a script which produces a Flat Image Tree (FIT), a single file
containing the built kernel and associated devicetree files.
Compression defaults to gzip which gives a good balance of size and
performance.

The files compress from about 86MB to 24MB using this approach.

The FIT can be used by bootloaders which support it, such as U-Boot
and Linuxboot. It permits automatic selection of the correct
devicetree, matching the compatible string of the running board with
the closest compatible string in the FIT. There is no need for
filenames or other workarounds.

Add a 'make image.fit' build target for arm64, as well.

The FIT can be examined using 'dumpimage -l'.

This uses the 'dtbs-list' file but processes only .dtb files, ignoring
the overlay .dtbo files.

This features requires pylibfdt (use 'pip install libfdt'). It also
requires compression utilities for the algorithm being used. Supported
compression options are the same as the Image.xxx files. Use
FIT_COMPRESSION to select an algorithm other than gzip.

While FIT supports a ramdisk / initrd, no attempt is made to support
this here, since it must be built separately from the Linux build.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240329032836.141899-3-sjg@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>

2 files changed, 306 insertions, 0 deletions

diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 3179747cbd2c..afa1099b6b8e 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -504,6 +504,22 @@ quiet_cmd_uimage = UIMAGE  $@
 			-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
 			-n '$(UIMAGE_NAME)' -d $< $@
 
+# Flat Image Tree (FIT)
+# This allows for packaging of a kernel and all devicetrees files, using
+# compression.
+# ---------------------------------------------------------------------------
+
+MAKE_FIT := $(srctree)/scripts/make_fit.py
+
+# Use this to override the compression algorithm
+FIT_COMPRESSION ?= gzip
+
+quiet_cmd_fit = FIT     $@
+      cmd_fit = $(MAKE_FIT) -o $@ --arch $(UIMAGE_ARCH) --os linux \
+		--name '$(UIMAGE_NAME)' \
+		$(if $(findstring 1,$(KBUILD_VERBOSE)),-v) \
+		--compress $(FIT_COMPRESSION) -k $< @$(word 2,$^)
+
 # XZ
 # ---------------------------------------------------------------------------
 # Use xzkern to compress the kernel image and xzmisc to compress other things.
diff --git a/scripts/make_fit.py b/scripts/make_fit.py
new file mode 100755
index 000000000000..3de90c5a094b
--- /dev/null
+++ b/scripts/make_fit.py
@@ -0,0 +1,290 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2024 Google LLC
+# Written by Simon Glass <sjg@chromium.org>
+#
+
+"""Build a FIT containing a lot of devicetree files
+
+Usage:
+    make_fit.py -A arm64 -n 'Linux-6.6' -O linux
+        -o arch/arm64/boot/image.fit -k /tmp/kern/arch/arm64/boot/image.itk
+        @arch/arm64/boot/dts/dtbs-list -E -c gzip
+
+Creates a FIT containing the supplied kernel and a set of devicetree files,
+either specified individually or listed in a file (with an '@' prefix).
+
+Use -E to generate an external FIT (where the data is placed after the
+FIT data structure). This allows parsing of the data without loading
+the entire FIT.
+
+Use -c to compress the data, using bzip2, gzip, lz4, lzma, lzo and
+zstd algorithms.
+
+The resulting FIT can be booted by bootloaders which support FIT, such
+as U-Boot, Linuxboot, Tianocore, etc.
+
+Note that this tool does not yet support adding a ramdisk / initrd.
+"""
+
+import argparse
+import collections
+import os
+import subprocess
+import sys
+import tempfile
+import time
+
+import libfdt
+
+
+# Tool extension and the name of the command-line tools
+CompTool = collections.namedtuple('CompTool', 'ext,tools')
+
+COMP_TOOLS = {
+    'bzip2': CompTool('.bz2', 'bzip2'),
+    'gzip': CompTool('.gz', 'pigz,gzip'),
+    'lz4': CompTool('.lz4', 'lz4'),
+    'lzma': CompTool('.lzma', 'lzma'),
+    'lzo': CompTool('.lzo', 'lzop'),
+    'zstd': CompTool('.zstd', 'zstd'),
+}
+
+
+def parse_args():
+    """Parse the program ArgumentParser
+
+    Returns:
+        Namespace object containing the arguments
+    """
+    epilog = 'Build a FIT from a directory tree containing .dtb files'
+    parser = argparse.ArgumentParser(epilog=epilog, fromfile_prefix_chars='@')
+    parser.add_argument('-A', '--arch', type=str, required=True,
+          help='Specifies the architecture')
+    parser.add_argument('-c', '--compress', type=str, default='none',
+          help='Specifies the compression')
+    parser.add_argument('-E', '--external', action='store_true',
+          help='Convert the FIT to use external data')
+    parser.add_argument('-n', '--name', type=str, required=True,
+          help='Specifies the name')
+    parser.add_argument('-o', '--output', type=str, required=True,
+          help='Specifies the output file (.fit)')
+    parser.add_argument('-O', '--os', type=str, required=True,
+          help='Specifies the operating system')
+    parser.add_argument('-k', '--kernel', type=str, required=True,
+          help='Specifies the (uncompressed) kernel input file (.itk)')
+    parser.add_argument('-v', '--verbose', action='store_true',
+                        help='Enable verbose output')
+    parser.add_argument('dtbs', type=str, nargs='*',
+          help='Specifies the devicetree files to process')
+
+    return parser.parse_args()
+
+
+def setup_fit(fsw, name):
+    """Make a start on writing the FIT
+
+    Outputs the root properties and the 'images' node
+
+    Args:
+        fsw (libfdt.FdtSw): Object to use for writing
+        name (str): Name of kernel image
+    """
+    fsw.INC_SIZE = 65536
+    fsw.finish_reservemap()
+    fsw.begin_node('')
+    fsw.property_string('description', f'{name} with devicetree set')
+    fsw.property_u32('#address-cells', 1)
+
+    fsw.property_u32('timestamp', int(time.time()))
+    fsw.begin_node('images')
+
+
+def write_kernel(fsw, data, args):
+    """Write out the kernel image
+
+    Writes a kernel node along with the required properties
+
+    Args:
+        fsw (libfdt.FdtSw): Object to use for writing
+        data (bytes): Data to write (possibly compressed)
+        args (Namespace): Contains necessary strings:
+            arch: FIT architecture, e.g. 'arm64'
+            fit_os: Operating Systems, e.g. 'linux'
+            name: Name of OS, e.g. 'Linux-6.6.0-rc7'
+            compress: Compression algorithm to use, e.g. 'gzip'
+    """
+    with fsw.add_node('kernel'):
+        fsw.property_string('description', args.name)
+        fsw.property_string('type', 'kernel_noload')
+        fsw.property_string('arch', args.arch)
+        fsw.property_string('os', args.os)
+        fsw.property_string('compression', args.compress)
+        fsw.property('data', data)
+        fsw.property_u32('load', 0)
+        fsw.property_u32('entry', 0)
+
+
+def finish_fit(fsw, entries):
+    """Finish the FIT ready for use
+
+    Writes the /configurations node and subnodes
+
+    Args:
+        fsw (libfdt.FdtSw): Object to use for writing
+        entries (list of tuple): List of configurations:
+            str: Description of model
+            str: Compatible stringlist
+    """
+    fsw.end_node()
+    seq = 0
+    with fsw.add_node('configurations'):
+        for model, compat in entries:
+            seq += 1
+            with fsw.add_node(f'conf-{seq}'):
+                fsw.property('compatible', bytes(compat))
+                fsw.property_string('description', model)
+                fsw.property_string('fdt', f'fdt-{seq}')
+                fsw.property_string('kernel', 'kernel')
+    fsw.end_node()
+
+
+def compress_data(inf, compress):
+    """Compress data using a selected algorithm
+
+    Args:
+        inf (IOBase): Filename containing the data to compress
+        compress (str): Compression algorithm, e.g. 'gzip'
+
+    Return:
+        bytes: Compressed data
+    """
+    if compress == 'none':
+        return inf.read()
+
+    comp = COMP_TOOLS.get(compress)
+    if not comp:
+        raise ValueError(f"Unknown compression algorithm '{compress}'")
+
+    with tempfile.NamedTemporaryFile() as comp_fname:
+        with open(comp_fname.name, 'wb') as outf:
+            done = False
+            for tool in comp.tools.split(','):
+                try:
+                    subprocess.call([tool, '-c'], stdin=inf, stdout=outf)
+                    done = True
+                    break
+                except FileNotFoundError:
+                    pass
+            if not done:
+                raise ValueError(f'Missing tool(s): {comp.tools}\n')
+            with open(comp_fname.name, 'rb') as compf:
+                comp_data = compf.read()
+    return comp_data
+
+
+def output_dtb(fsw, seq, fname, arch, compress):
+    """Write out a single devicetree to the FIT
+
+    Args:
+        fsw (libfdt.FdtSw): Object to use for writing
+        seq (int): Sequence number (1 for first)
+        fmame (str): Filename containing the DTB
+        arch: FIT architecture, e.g. 'arm64'
+        compress (str): Compressed algorithm, e.g. 'gzip'
+
+    Returns:
+        tuple:
+            str: Model name
+            bytes: Compatible stringlist
+    """
+    with fsw.add_node(f'fdt-{seq}'):
+        # Get the compatible / model information
+        with open(fname, 'rb') as inf:
+            data = inf.read()
+        fdt = libfdt.FdtRo(data)
+        model = fdt.getprop(0, 'model').as_str()
+        compat = fdt.getprop(0, 'compatible')
+
+        fsw.property_string('description', model)
+        fsw.property_string('type', 'flat_dt')
+        fsw.property_string('arch', arch)
+        fsw.property_string('compression', compress)
+        fsw.property('compatible', bytes(compat))
+
+        with open(fname, 'rb') as inf:
+            compressed = compress_data(inf, compress)
+        fsw.property('data', compressed)
+    return model, compat
+
+
+def build_fit(args):
+    """Build the FIT from the provided files and arguments
+
+    Args:
+        args (Namespace): Program arguments
+
+    Returns:
+        tuple:
+            bytes: FIT data
+            int: Number of configurations generated
+            size: Total uncompressed size of data
+    """
+    seq = 0
+    size = 0
+    fsw = libfdt.FdtSw()
+    setup_fit(fsw, args.name)
+    entries = []
+
+    # Handle the kernel
+    with open(args.kernel, 'rb') as inf:
+        comp_data = compress_data(inf, args.compress)
+    size += os.path.getsize(args.kernel)
+    write_kernel(fsw, comp_data, args)
+
+    for fname in args.dtbs:
+        # Ignore overlay (.dtbo) files
+        if os.path.splitext(fname)[1] == '.dtb':
+            seq += 1
+            size += os.path.getsize(fname)
+            model, compat = output_dtb(fsw, seq, fname, args.arch, args.compress)
+            entries.append([model, compat])
+
+    finish_fit(fsw, entries)
+
+    # Include the kernel itself in the returned file count
+    return fsw.as_fdt().as_bytearray(), seq + 1, size
+
+
+def run_make_fit():
+    """Run the tool's main logic"""
+    args = parse_args()
+
+    out_data, count, size = build_fit(args)
+    with open(args.output, 'wb') as outf:
+        outf.write(out_data)
+
+    ext_fit_size = None
+    if args.external:
+        mkimage = os.environ.get('MKIMAGE', 'mkimage')
+        subprocess.check_call([mkimage, '-E', '-F', args.output],
+                              stdout=subprocess.DEVNULL)
+
+        with open(args.output, 'rb') as inf:
+            data = inf.read()
+        ext_fit = libfdt.FdtRo(data)
+        ext_fit_size = ext_fit.totalsize()
+
+    if args.verbose:
+        comp_size = len(out_data)
+        print(f'FIT size {comp_size:#x}/{comp_size / 1024 / 1024:.1f} MB',
+              end='')
+        if ext_fit_size:
+            print(f', header {ext_fit_size:#x}/{ext_fit_size / 1024:.1f} KB',
+                  end='')
+        print(f', {count} files, uncompressed {size / 1024 / 1024:.1f} MB')
+
+
+if __name__ == "__main__":
+    sys.exit(run_make_fit())