| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The first DMAC instance in the StarFive JH7100 SoC supports 16 DMA
channels.
FIXME Given there are more changes to the driver than just increasing
DMAC_MAX_CHANNELS, we probably need a new compatible value, too.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Current u-boot doesn't seem to take into account that some GPIOs are
configured as inputs/outputs of certain peripherals on power-up. This
means it ends up configuring some GPIOs as inputs to more than one
peripheral which the documentation explicitly says is illegal. Similarly
it also ends up configuring more than one GPIO as output of the same
peripheral. While not explicitly mentioned by the documentation this
also seems like a bad idea.
The easiest way to remedy this mess is to just disconnect all GPIOs from
peripherals and have our pinmux configuration set everything up
properly. This, however, means that we'd disconnect the serial console
from its pins for a while, so add a device tree property to keep
certain GPIOs from being reset.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
Add bindings for the audio reset controller on the StarFive JH7100
RISC-V SoC.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes, 11 of which are cc:stable.
A few nilfs2 fixes, the remainder are for MM: a couple of selftests
fixes, various singletons fixing various issues in various parts"
* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/ksm: fix possible UAF of stable_node
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
nilfs2: fix potential hang in nilfs_detach_log_writer()
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
nilfs2: fix use-after-free of timer for log writer thread
selftests/mm: fix build warnings on ppc64
arm64: patching: fix handling of execmem addresses
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
selftests/mm: compaction_test: fix bogus test success on Aarch64
mailmap: update email address for Satya Priya
mm/huge_memory: don't unpoison huge_zero_folio
kasan, fortify: properly rename memintrinsics
lib: add version into /proc/allocinfo output
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
|
|
Pull ceph updates from Ilya Dryomov:
"A series from Xiubo that adds support for additional access checks
based on MDS auth caps which were recently made available to clients.
This is needed to prevent scenarios where the MDS quietly discards
updates that a UID-restricted client previously (wrongfully) acked to
the user.
Other than that, just a documentation fixup"
* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
doc: ceph: update userspace command to get CephFS metadata
ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
ceph: check the cephx mds auth access for async dirop
ceph: check the cephx mds auth access for open
ceph: check the cephx mds auth access for setattr
ceph: add ceph_mds_check_access() helper
ceph: save cap_auths in MDS client when session is opened
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is one new driver and then most of the changes are the device
tree bindings conversions to yaml.
New driver:
- Epson RX8111
Drivers:
- Many Device Tree bindings conversions to dtschema
- pcf8563: wakeup-source support"
* tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
pcf8563: add wakeup-source support
rtc: rx8111: handle VLOW flag
rtc: rx8111: demote warnings to debug level
rtc: rx6110: Constify struct regmap_config
dt-bindings: rtc: convert trivial devices into dtschema
dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
dt-bindings: rtc: pxa-rtc: convert to dtschema
rtc: Add driver for Epson RX8111
dt-bindings: rtc: Add Epson RX8111
rtc: mcp795: drop unneeded MODULE_ALIAS
rtc: nuvoton: Modify part number value
rtc: test: Split rtc unit test into slow and normal speed test
dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema
dt-bindings: rtc: digicolor-rtc: move to trivial-rtc
dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema
dt-bindings: rtc: armada-380-rtc: convert to dtschema
rtc: cros-ec: provide ID table for avoiding fallback match
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more mm updates from Andrew Morton:
"Jeff Xu's implementation of the mseal() syscall"
* tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftest mm/mseal read-only elf memory segment
mseal: add documentation
selftest mm/mseal memory sealing
mseal: add mseal syscall
mseal: wire up mseal syscall
|
|
Add version string and a header at the beginning of /proc/allocinfo to
allow later format changes. Example output:
> head /proc/allocinfo
allocinfo - version: 1.0
# <size> <calls> <tag info>
0 0 init/main.c:1314 func:do_initcalls
0 0 init/do_mounts.c:353 func:mount_nodev_root
0 0 init/do_mounts.c:187 func:mount_root_generic
0 0 init/do_mounts.c:158 func:do_mount_root
0 0 init/initramfs.c:493 func:unpack_to_rootfs
0 0 init/initramfs.c:492 func:unpack_to_rootfs
0 0 init/initramfs.c:491 func:unpack_to_rootfs
512 1 arch/x86/events/rapl.c:681 func:init_rapl_pmus
128 1 arch/x86/events/rapl.c:571 func:rapl_cpu_online
[akpm@linux-foundation.org: remove stray newline from struct allocinfo_private]
Link: https://lkml.kernel.org/r/20240514163128.3662251-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a change to input core to trim amount of keys data in modalias string
in case when a device declares too many keys and they do not fit in
uevent buffer instead of reporting an error which results in uevent
not being generated at all
- support for Machenike G5 Pro Controller added to xpad driver
- support for FocalTech FT5452 and FT8719 added to edt-ft5x06
- support for new SPMI vibrator added to pm8xxx-vibrator driver
- missing locking added to cyapa touchpad driver
- removal of unused fields in various driver structures
- explicit initialization of i2c_device_id::driver_data to 0 dropped
from input drivers
- other assorted fixes and cleanups.
* tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719
dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support
Input: xpad - add support for Machenike G5 Pro Controller
Input: try trimming too long modalias strings
Input: drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: zet6223 - remove an unused field in struct zet6223_ts
Input: chipone_icn8505 - remove an unused field in struct icn8505_data
Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb
Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv
Input: matrix_keypad - remove an unused field in struct matrix_keypad
Input: tca6416-keypad - remove unused struct tca6416_drv_data
Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip
Input: da7280 - remove an unused field in struct da7280_haptic
Input: ff-core - prefer struct_size over open coded arithmetic
Input: cyapa - add missing input core locking to suspend/resume functions
input: pm8xxx-vibrator: add new SPMI vibrator support
dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
input: pm8xxx-vibrator: refactor to support new SPMI vibrator
Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
Input: sur40 - convert le16 to cpu before use
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
device-specific fixes and quirks, while there are a few small changes
in ALSA core timer and module / built-in fixes"
* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
ALSA: core: Enable proc module when CONFIG_MODULES=y
ALSA: core: Fix NULL module pointer assignment at card init
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
ASoC: tas2781: Fix wrong loading calibrated data sequence
ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
ALSA: usb-audio: Fix for sampling rates support for Mbox3
Documentation: sound: Fix trailing whitespaces
ALSA: timer: Set lower bound of start tick time
ASoC: codecs: ES8326: solve hp and button detect issue
ASoC: rt5645: mic-in detection threshold modification
ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection
|
|
Add documentation for mseal().
Link: https://lkml.kernel.org/r/20240415163527.626541-5-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The major fix here is for a filesystem corruption issue reported on
Apple M1 as a result of buggy management of the floating point
register state introduced in 6.8. I initially reverted one of the
offending patches, but in the end Ard cooked a proper fix so there's a
revert+reapply in the series.
Aside from that, we've got some CPU errata workarounds and misc other
fixes.
- Fix broken FP register state tracking which resulted in filesystem
corruption when dm-crypt is used
- Workarounds for Arm CPU errata affecting the SSBS Spectre
mitigation
- Fix lockdep assertion in DMC620 memory controller PMU driver
- Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
disabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: Avoid erroneous elide of user state reload
Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
perf/arm-dmc620: Fix lockdep assert in ->event_init()
Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
arm64: errata: Add workaround for Arm errata 3194386 and 3312417
arm64: cputype: Add Neoverse-V3 definitions
arm64: cputype: Add Cortex-X4 definitions
arm64: barrier: Restore spec_bar() macro
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.
|
|
According to ceph documentation [1], "getfattr -d /some/dir" no longer
displays the list of all extended attributes. Both CephFS kernel and
FUSE clients hide this information.
To retrieve the information you have to specify the particular attribute
name e.g. "getfattr -n ceph.dir.rbytes /some/dir".
[1] https://docs.ceph.com/en/latest/cephfs/quota/
Signed-off-by: Artem Ikonnikov <artem@datacrunch.io>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
New Functionality:
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions"
* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
dt-bindings: mfd: Use full path to other schemas
mfd: rsmu: support I2C SMBus access
dt-bindings: mfd: Convert lp873x.txt to json-schema
dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
mfd: kempld: Remove custom DMI matching code
mfd: cs42l43: Update patching revision check
dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
mfd: timberdale: Remove redundant assignment to variable err
dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
mfd: axp20x: Convert to use Maple Tree register cache
mfd: bd71828: Remove commented code lines
mfd: intel-m10-bmc: Change staging size to a variable
dt-bindings: mfd: Add ROHM BD71879
mfd: Tidy Kconfig dependency's parentheses
mfd: ocelot-spi: Use spi_sync_transfer()
dt-bindings: mfd: syscon: Add missing simple syscon compatibles
...
|
|
Document FocalTech FT5452 and FT8719 support by adding their compatibles.
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521-add-support-ft5452-and-ft8719-touchscreen-v1-1-2a648ac7176b@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"General:
- Integrate the shellcheck utility with the build of perf to allow
catching shell problems early in areas such as 'perf test', 'perf
trace' scrape scripts, etc
- Add 'uretprobe' variant in the 'perf bench uprobe' tool
- Add script to run instances of 'perf script' in parallel
- Allow parsing tracepoint names that start with digits, such as
9p/9p_client_req, etc. Make sure 'perf test' tests it even on
systems where those tracepoints aren't available
- Add Kan Liang to MAINTAINERS as a perf tools reviewer
- Add support for using the 'capstone' disassembler library in
various tools, such as 'perf script' and 'perf annotate'. This is
an alternative for the use of the 'xed' and 'objdump' disassemblers
Data-type profiling improvements:
- Resolve types for a->b->c by backtracking the assignments until it
finds DWARF info for one of those members
- Support for global variables, keeping a cache to speed up lookups
- Handle the 'call' instruction, dealing with effects on registers
and handling its return when tracking register data types
- Handle x86's segment based addressing like %gs:0x28, to support
things like per CPU variables, the stack canary, etc
- Data-type profiling got big speedups when using capstone for
disassembling. The objdump outoput parsing method is left as a
fallback when capstone fails or isn't available. There are patches
posted for 6.11 that to use a LLVM disassembler
- Support event group display in the TUI when annotating types with
--data-type, for instance to show memory load and store events for
the data type fields
- Optimize the 'perf annotate' data structures, reducing memory usage
- Add a initial 'perf test' for 'perf annotate', checking that a
target symbol appears on the output, specifying objdump via the
command line, etc
Vendor Events:
- Update Intel JSON files for Cascade Lake X, Emerald Rapids, Grand
Ridge, Ice Lake X, Lunar Lake, Meteor Lake, Sapphire Rapids, Sierra
Forest, Sky Lake X, Sky Lake and Snow Ridge X. Remove info metrics
erroneously in TopdownL1
- Add AMD's Zen 5 core and uncore events and metrics. Those come from
the "Performance Monitor Counters for AMD Family 1Ah Model 00h- 0Fh
Processors" document, with events that capture information on op
dispatch, execution and retirement, branch prediction, L1 and L2
cache activity, TLB activity, etc
- Mark L1D_CACHE_INVAL impacted by errata for ARM64's AmpereOne/
AmpereOneX
Miscellaneous:
- Sync header copies with the kernel sources
- Move some header copies used only for generating translation string
tables for ioctl cmds and other syscall integer arguments to a new
directory under tools/perf/beauty/, to separate from copies in
tools/include/ that are used to build the tools
- Introduce scrape script for several syscall 'flags'/'mask'
arguments
- Improve cpumap utilization, fixing up pairing of refcounts, using
the right iterators (perf_cpu_map__for_each_cpu), etc
- Give more details about raw event encodings in 'perf list', show
tracepoint encoding in the detailed output
- Refactor the DSOs handling code, reducing memory usage
- Document the BPF event modifier and add a 'perf test' for it
- Improve the event parser, better error messages and add further
'perf test's for it
- Add reference count checking to 'struct comm_str' and 'struct
mem_info'
- Make ARM64's 'perf test' entries for the Neoverse N1 more robust
- Tweak the ARM64's Coresight 'perf test's
- Improve ARM64's CoreSight ETM version detection and error reporting
- Fix handling of symbols when using kcore
- Fix PAI (Processor Activity Instrumentation) counter names for s390
virtual machines in 'perf report'
- Fix -g/--call-graph option failure in 'perf sched timehist'
- Add LIBTRACEEVENT_DIR build option to allow building with
libtraceevent installed in non-standard directories, such as when
doing cross builds
- Various 'perf test' and 'perf bench' fixes
- Improve 'perf probe' error message for long C++ probe names"
* tag 'perf-tools-for-v6.10-1-2024-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (260 commits)
tools lib subcmd: Show parent options in help
perf pmu: Count sys and cpuid JSON events separately
perf stat: Don't display metric header for non-leader uncore events
perf annotate-data: Ensure the number of type histograms
perf annotate: Fix segfault on sample histogram
perf daemon: Fix file leak in daemon_session__control
libsubcmd: Fix parse-options memory leak
perf lock: Avoid memory leaks from strdup()
perf sched: Rename 'switches' column header to 'count' and add usage description, options for latency
perf tools: Ignore deleted cgroups
perf parse: Allow tracepoint names to start with digits
perf parse-events: Add new 'fake_tp' parameter for tests
perf parse-events: pass parse_state to add_tracepoint
perf symbols: Fix ownership of string in dso__load_vmlinux()
perf symbols: Update kcore map before merging in remaining symbols
perf maps: Re-use __maps__free_maps_by_name()
perf symbols: Remove map from list before updating addresses
perf tracepoint: Don't scan all tracepoints to test if one exists
perf dwarf-aux: Fix build with HAVE_DWARF_CFI_SUPPORT
perf thread: Fixes to thread__new() related to initializing comm
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull generic phy updates from Vinod Koul:
"New HW Support:
- Support for Embedded DisplayPort and DisplayPort submodes and
driver support on Qualcomm X1E80100 edp driver
- Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
and eusb2-repeater for SMB2360
- Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
- Mediatek XFI T-PHY support for mt7988
- Rockchip usbdp combo phy driver
Updates:
- Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
swing tables
- Freescale imx8m-pci pcie link-up updates
- Rockchip rx-common-refclk-mode support
- More platform remove callback returning void conversions"
* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
phy: samsung-ufs: ufs: exit on first reported error
phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
phy: rockchip: fix CONFIG_TYPEC dependency
phy: rockchip: usbdp: fix uninitialized variable
phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
phy: rockchip: add usbdp combo phy driver
dt-bindings: phy: add rockchip usbdp combo phy document
phy: add driver for MediaTek XFI T-PHY
dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New HW support:
- Freescale i.MX8ULP edma support in edma driver
- StarFive JH8100 DMA support in Synopsis axi-dmac driver
Updates:
- Tracing support for freescale edma driver, updates to dpaa2 driver
- Remove unused QCom hidma DT support
- Support for i2c dma in imx-sdma
- Maintainers update for idxd and edma drivers"
* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
MAINTAINERS: Update role for IDXD driver
dmaengine: fsl-edma: use _Generic to handle difference type
dmaengine: fsl-edma: add trace event support
dmaengine: idxd: Avoid unnecessary destruction of file_ida
dmaengine: xilinx: xdma: fix module autoloading
dt-bindings: dma: fsl-edma: allow 'power-domains' property
dt-bindings: dma: fsl-edma: remove 'clocks' from required
dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
dmaengine: imx-sdma: Add i2c dma support
dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dt-bindings: dma: Drop unused QCom hidma binding
dmaengine: qcom: Drop hidma DT support
dmaengine: pl08x: Use kcalloc() instead of kzalloc()
dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
dmaengine: fsl-edma: fix miss mutex unlock at an error return path
dmaengine: pch_dma: remove unused function chan2parent
dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- redo the omap driver from legacy to mailbox api
- enable bufferless IPI for zynqmp
- add mhu-v3 driver
- convert from tasklet to BH workqueue
- add qcom MSM8974 APCS compatible IDs
* tag 'mailbox-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (24 commits)
dt-bindings: mailbox: qcom-ipcc: Document the SDX75 IPCC
dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible
mailbox: Convert from tasklet to BH workqueue
mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown
mailbox: mtk-cmdq-mailbox: fix module autoloading
mailbox: zynqmp: handle SGI for shared IPI
mailbox: arm_mhuv3: Add driver
dt-bindings: mailbox: arm,mhuv3: Add bindings
mailbox: omap: Remove kernel FIFO message queuing
mailbox: omap: Reverse FIFO busy check logic
mailbox: omap: Remove mbox_chan_to_omap_mbox()
mailbox: omap: Use mbox_controller channel list directly
mailbox: omap: Use function local struct mbox_controller
mailbox: omap: Merge mailbox child node setup loops
mailbox: omap: Use devm_pm_runtime_enable() helper
mailbox: omap: Remove device class
mailbox: omap: Remove unneeded header omap-mailbox.h
mailbox: omap: Move fifo size check to point of use
mailbox: omap: Move omap_mbox_irq_t into driver
mailbox: omap: Remove unused omap_mbox_request_channel() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This makes the remoteproc core rproc_class const.
DeviceTree bindings for a few different Qualcomm remoteprocs are
updated to remove a range of validation warnings/errors. The Qualcomm
SMD binding marks qcom,ipc deprecated, in favor or the mailbox
interface.
The TI K3 R5 remoteproc driver is updated to ensure that cores are
powered up in the appropriate order. The driver also see a couple of
fixes related to cleanups in error paths during probe.
The Mediatek remoteproc driver is extended to support the MT8188 SCP
core 1. Support for varying DRAM and IPI shared buffer sizes are
introduced. This together with a couple of bug fixes and improvements
to the driver.
Support for the AMD-Xilinx Versal and Versal-NET platforms are added.
Coredump support and support for parsing TCM information from
DeviceTree is added to the Xilinx R5F remoteproc driver"
* tag 'rproc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
dt-bindings: remoteproc: qcom,sdm845-adsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs definition
dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
remoteproc: k3-r5: Jump to error handling labels in start/stop errors
remoteproc: mediatek: Fix error code in scp_rproc_init()
remoteproc: k3-r5: Do not allow core1 to power up before core0 via sysfs
remoteproc: k3-r5: Wait for core0 power-up before powering up core1
remoteproc: mediatek: Add IMGSYS IPI command
remoteproc: mediatek: Support setting DRAM and IPI shared buffer sizes
remoteproc: mediatek: Support MT8188 SCP core 1
dt-bindings: remoteproc: mediatek: Support MT8188 dual-core SCP
drivers: remoteproc: xlnx: Fix uninitialized tcm mode
drivers: remoteproc: xlnx: Fix uninitialized variable use
drivers: remoteproc: xlnx: Add Versal and Versal-NET support
remoteproc: zynqmp: parse TCM from device tree
dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
remoteproc: zynqmp: fix lockstep mode memory region
remoteproc: zynqmp: Add coredump support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs blocksize updates from Al Viro:
"This gets rid of bogus set_blocksize() uses, switches it over
to be based on a 'struct file *' and verifies that the caller
has the device opened exclusively"
* tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make set_blocksize() fail unless block device is opened exclusive
set_blocksize(): switch to passing struct file *
btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens
swsusp: don't bother with setting block size
zram: don't bother with reopening - just use O_EXCL for open
swapon(2): open swap with O_EXCL
swapon(2)/swapoff(2): don't bother with block size
pktcdvd: sort set_blocksize() calls out
bcache_register(): don't bother with set_blocksize()
|
|
The compatible pattern "st,stm32-sai-sub-[ab]" is missing starting and
ending anchors, so any prefix and/or suffix would still be valid.
This also fixes a warning on the example:
Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a']
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/20240520222705.1742367-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC devicetree updates from Arnd Bergmann:
"This is a follow-up to an earlier pull request for device tree
changes, as three platform maintainers sent their contents too late to
be included in the main set, but had not caused any further problems
since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while another
one gets removed
- The RISC-V platforms from Microchip, Starfive and and T-HEAD get
additional features for existing hardware, plus the addition of the
Milk-V Mars based on the StarFive VisionFive v2 board"
* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
riscv: dts: microchip: add pac1934 power-monitor to icicle
riscv: dts: thead: Fix node ordering in TH1520 device tree
ARM: dts: aspeed: Add ASRock E3C256D4I BMC
dt-bindings: arm: aspeed: document ASRock E3C256D4I
dt-bindings: trivial-devices: add isil,isl69269
ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
dt-bindings: arm: aspeed: add ASUS X4TF board
ARM: dts: aspeed: Remove Facebook Cloudripper dts
ARM: dts: aspeed: drop unused ref_voltage ADC property
ARM: dts: aspeed: harma: correct Mellanox multi-host property
ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
ARM: dts: aspeed: Modify I2C bus configuration
ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
...
|
|
Pull vfio updates from Alex Williamson:
- The vfio fsl-mc bus driver has become orphaned. We'll consider
removing it in future releases if a new maintainer isn't found (Alex
Williamson)
- Improved usage of opaque data in vfio-pci INTx handling, avoiding
lookups of the eventfd through the interrupt and irqfd runtime paths
(Alex Williamson)
- Resolve an error path memory leak introduced in vfio-pci interrupt
code (Ye Bin)
- Addition of interrupt support for vfio devices exposed on the CDX
bus, including a new MSI allocation helper and export of existing
helpers for MSI alloc and free (Nipun Gupta)
- A new vfio-pci variant driver supporting migration of Intel QAT VF
devices for the GEN4 PFs (Xin Zeng & Yahui Cao)
- Resolve a possibly circular locking dependency in vfio-pci by
avoiding copy_to_user() from a PCI bus walk callback (Alex
Williamson)
- Trivial docs update to remove a duplicate semicolon (Foryun Ma)
* tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Restore zero affected bus reset devices warning
vfio: remove an extra semicolon
vfio/pci: Collect hot-reset devices to local buffer
vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices
vfio/cdx: add interrupt support
genirq/msi: Add MSI allocation helper and export MSI functions
vfio/pci: fix potential memory leak in vfio_intx_enable()
vfio/pci: Pass eventfd context object through irqfd
vfio/pci: Pass eventfd context to IRQ handler
MAINTAINERS: Orphan vfio fsl-mc bus driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues on zoned
storage such as direct IO and write_hints. In addition, we've migrated
some IO paths using folio. Meanwhile, there are multiple bug fixes in
the compression paths, sanity check conditions, and error handlers.
Enhancements:
- allow direct io of pinned files for zoned storage
- assign the write hint per stream by default
- convert read paths and test_writeback to folio
- avoid allocating WARM_DATA segment for direct IO
Bug fixes:
- fix false alarm on invalid block address
- fix to add missing iput() in gc_data_segment()
- fix to release node block count in error path of
f2fs_new_node_page()
- compress:
- don't allow unaligned truncation on released compress inode
- cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
- fix error path of inc_valid_block_count()
- fix to update i_compr_blocks correctly
- fix block migration when section is not aligned to pow2
- don't trigger OPU on pinfile for direct IO
- fix to do sanity check on i_xattr_nid in sanity_check_inode()
- write missing last sum blk of file pinning section
- clear writeback when compression failed
- fix to adjust appropirate defragment pg_end
As usual, there are several minor code clean-ups, and fixes to manage
missing corner cases in the error paths"
* tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
f2fs: initialize last_block_in_bio variable
f2fs: Add inline to f2fs_build_fault_attr() stub
f2fs: fix some ambiguous comments
f2fs: fix to add missing iput() in gc_data_segment()
f2fs: allow dirty sections with zero valid block for checkpoint disabled
f2fs: compress: don't allow unaligned truncation on released compress inode
f2fs: fix to release node block count in error path of f2fs_new_node_page()
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
f2fs: compress: fix error path of inc_valid_block_count()
f2fs: compress: fix typo in f2fs_reserve_compress_blocks()
f2fs: compress: fix to update i_compr_blocks correctly
f2fs: check validation of fault attrs in f2fs_build_fault_attr()
f2fs: fix to limit gc_pin_file_threshold
f2fs: remove unused GC_FAILURE_PIN
f2fs: use f2fs_{err,info}_ratelimited() for cleanup
f2fs: fix block migration when section is not aligned to pow2
f2fs: zone: fix to don't trigger OPU on pinfile for direct IO
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
f2fs: fix to avoid allocating WARM_DATA segment for direct IO
f2fs: remove redundant parameter in is_next_segment_free()
...
|
|
Pull xfs updates from Chandan Babu:
"Online repair feature continues to be expanded. Also, we now support
delayed allocation for realtime devices which have an extent size that
is equal to filesystem's block size.
New code:
- Introduce Parent Pointer extended attribute for inodes
- Bring back delalloc support for realtime devices which have an
extent size that is equal to filesystem's block size
- Improve performance of log incompat feature handling
Online Repair:
- Implement atomic file content exchanges i.e. exchange ranges of
bytes between two files atomically
- Create temporary files to repair file-based metadata. This uses
atomic file content exchange facility to swap file fork mappings
between the temporary file and the metadata inode
- Allow callers of directory/xattr code to set an explicit owner
number to be written into the header fields of any new blocks that
are created. This is required to avoid walking every block of the
new structure and modify their ownership during online repair
- Repair more data structures:
- Extended attributes
- Inode unlinked state
- Directories
- Symbolic links
- AGI's unlinked inode list
- Parent pointers
- Move Orphan files to lost and found directory
- Fixes for Inode repair functionality
- Introduce a new sub-AG FITRIM implementation to reduce the duration
for which the AGF lock is held
- Updates for the design documentation
- Use Parent Pointers to assist in checking directories, parent
pointers, extended attributes, and link counts
Fixes:
- Prevent userspace from reading invalid file data due to incorrect.
updation of file size when performing a non-atomic clone operation
- Minor fixes to online repair
- Fix confusing return values from xfs_bmapi_write()
- Fix an out of bounds access due to incorrect h_size during log
recovery
- Defer upgrading the extent counters in xfs_reflink_end_cow_extent()
until we know we are going to modify the extent mapping
- Remove racy access to if_bytes check in
xfs_reflink_end_cow_extent()
- Fix sparse warnings
Cleanups:
- Hold inode locks on all files involved in a rename until the
completion of the operation. This is in preparation for the parent
pointers patchset where parent pointers are applied in a separate
chained update from the actual directory update
- Compile out v4 support when disabled
- Cleanup xfs_extent_busy_clear()
- Remove unused flags and fields from struct xfs_da_args
- Remove definitions of unused functions
- Improve extended attribute validation
- Add higher level directory operations helpers to remove duplication
of code
- Cleanup quota (un)reservation interfaces"
* tag 'xfs-6.10-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (221 commits)
xfs: simplify iext overflow checking and upgrade
xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent
xfs: upgrade the extent counters in xfs_reflink_end_cow_extent later
xfs: xfs_quota_unreserve_blkres can't fail
xfs: consolidate the xfs_quota_reserve_blkres definitions
xfs: clean up buffer allocation in xlog_do_recovery_pass
xfs: fix log recovery buffer allocation for the legacy h_size fixup
xfs: widen flags argument to the xfs_iflags_* helpers
xfs: minor cleanups of xfs_attr3_rmt_blocks
xfs: create a helper to compute the blockcount of a max sized remote value
xfs: turn XFS_ATTR3_RMT_BUF_SPACE into a function
xfs: use unsigned ints for non-negative quantities in xfs_attr_remote.c
xfs: do not allocate the entire delalloc extent in xfs_bmapi_write
xfs: fix xfs_bmap_add_extent_delay_real for partial conversions
xfs: remove the xfs_iext_peek_prev_extent call in xfs_bmapi_allocate
xfs: pass the actual offset and len to allocate to xfs_bmapi_allocate
xfs: don't open code XFS_FILBLKS_MIN in xfs_bmapi_write
xfs: lift a xfs_valid_startblock into xfs_bmapi_allocate
xfs: remove the unusued tmp_logflags variable in xfs_bmapi_allocate
xfs: fix error returns from xfs_bmapi_write
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are
converted, too.
Other that that, Andi collected a number if I2C host driver patches.
Those merges have their own description"
* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
i2c: mux: Remove class argument from i2c_mux_add_adapter()
i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
i2c: acpi: Unbind mux adapters before delete
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: pxa: use 'time_left' variable with wait_event_timeout()
i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
i2c: rk3x: use 'time_left' variable with wait_event_timeout()
i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
i2c: st: use 'time_left' variable with wait_for_completion_timeout()
i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries
New drivers:
- Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support
Improvements:
- Serious cleanup of the recently merged aw9523 driver
- Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single
- A slew of device tree binding cleanups
- Support a bus clock in the Samsung driver"
* tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
pinctrl: bcm2835: Make pin freeing behavior configurable
dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108
pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs
dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function
dt-bindings: pinctrl: mediatek: mt7622: fix array properties
pinctrl: samsung: drop redundant drvdata assignment
pinctrl: samsung: support a bus clock
dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces
pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function
pinctrl: renesas: r8a779h0: Fix IRQ suffixes
pinctrl: renesas: rzg2l: Remove extra space in function parameter
dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901
pinctrl: pinconf-generic: print hex value
pinctrl: realtek: fix module autoloading
pinctrl: qcom: sm7150: fix module autoloading
pinctrl: loongson2: fix module autoloading
pinctrl: mediatek: fix module autoloading
pinctrl: freescale: imx8ulp: fix module autoloading
dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes
...
|
|
Document the Inter-Processor Communication Controller on the SDX75 Platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add compatible for the Qualcomm MSM8974 APCS block.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add bindings for the ARM MHUv3 Mailbox controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Several architectures provide an API to enable the FPU and run
floating-point SIMD code in kernel space. However, the function names,
header locations, and semantics are inconsistent across architectures, and
FPU support may be gated behind other Kconfig options.
provide a standard way for architectures to declare that kernel space
FPU support is available. Architectures selecting this option must
implement what is currently the most common API (kernel_fpu_begin() and
kernel_fpu_end(), plus a new function kernel_fpu_available()) and
provide the appropriate CFLAGS for compiling floating-point C code.
Link: https://lkml.kernel.org/r/20240329072441.591471-2-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
|
|
Pull bcachefs updates from Kent Overstreet:
- More safety fixes, primarily found by syzbot
- Run the upgrade/downgrade paths in nochnages mode. Nochanges mode is
primarily for testing fsck/recovery in dry run mode, so it shouldn't
change anything besides disabling writes and holding dirty metadata
in memory.
The idea here was to reduce the amount of activity if we can't write
anything out, so that bringing up a filesystem in "super ro" mode
would be more lilkely to work for data recovery - but norecovery is
the correct option for this.
- btree_trans->locked; we now track whether a btree_trans has any btree
nodes locked, and this is used for improved assertions related to
trans_unlock() and trans_relock(). We'll also be using it for
improving how we work with lockdep in the future: we don't want
lockdep to be tracking individual btree node locks because we take
too many for lockdep to track, and it's not necessary since we have a
cycle detector.
- Trigger improvements that are prep work for online fsck
- BTREE_TRIGGER_check_repair; this regularizes how we do some repair
work for extents that goes with running triggers in fsck, and fixes
some subtle issues with transaction restarts there.
- bch2_snapshot_equiv() has now been ripped out of fsck.c; snapshot
equivalence classes are for when snapshot deletion leaves behind
redundant snapshot nodes, but snapshot deletion now cleans this up
right away, so the abstraction doesn't need to leak.
- Improvements to how we resume writing to the journal in recovery. The
code for picking the new place to write when reading the journal is
greatly simplified and we also store the position in the superblock
for when we don't read the journal; this means that we preserve more
of the journal for list_journal debugging.
- Improvements to sysfs btree_cache and btree_node_cache, for debugging
memory reclaim.
- We now detect when we've blocked for 10 seconds on the allocator in
the write path and dump some useful info.
- Safety fixes for devices references: this is a big series that
changes almost all device lookups to properly check if the device
exists and take a reference to it.
Previously we assumed that if a bkey exists that references a device
then the device must exist, and this was enforced in .invalid
methods, but this was incorrect because it meant device removal
relied on accounting being correct to not leave keys pointing to
invalid devices, and that's not something we can assume.
Getting the "pointer to invalid device" checks out of our .invalid()
methods fixes some long standing device removal bugs; the only
outstanding bug with device removal now is a race between the discard
path and deleting alloc info, which should be easily fixed.
- The allocator now prefers not to expand the new
member_info.btree_allocated bitmap, meaning if repair ever requires
scanning for btree nodes (because of a corrupt interior nodes) we
won't have to scan the whole device(s).
- New coding style document, which among other things talks about the
correct usage of assertions
* tag 'bcachefs-2024-05-19' of https://evilpiepirate.org/git/bcachefs: (155 commits)
bcachefs: add no_invalid_checks flag
bcachefs: add counters for failed shrinker reclaim
bcachefs: Fix sb_field_downgrade validation
bcachefs: Plumb bch_validate_flags to sb_field_ops.validate()
bcachefs: s/bkey_invalid_flags/bch_validate_flags
bcachefs: fsync() should not return -EROFS
bcachefs: Invalid devices are now checked for by fsck, not .invalid methods
bcachefs: kill bch2_dev_bkey_exists() in bch2_check_fix_ptrs()
bcachefs: kill bch2_dev_bkey_exists() in bch2_read_endio()
bcachefs: bch2_dev_get_ioref() checks for device not present
bcachefs: bch2_dev_get_ioref2(); io_read.c
bcachefs: bch2_dev_get_ioref2(); debug.c
bcachefs: bch2_dev_get_ioref2(); journal_io.c
bcachefs: bch2_dev_get_ioref2(); io_write.c
bcachefs: bch2_dev_get_ioref2(); btree_io.c
bcachefs: bch2_dev_get_ioref2(); backpointers.c
bcachefs: bch2_dev_get_ioref2(); alloc_background.c
bcachefs: for_each_bset() declares loop iter
bcachefs: Move BCACHEFS_STATFS_MAGIC value to UAPI magic.h
bcachefs: Improve sysfs internal/btree_cache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a sched_balance_newidle setting bug
- Fix bug in the setting of /sys/fs/cgroup/test/cpu.max.burst
- Fix variable-shadowing build warning
- Extend sched-domains debug output
- Fix documentation
- Fix comments
* tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix incorrect initialization of the 'burst' parameter in cpu_max_write()
sched/fair: Remove stale FREQUENCY_UTIL comment
sched/fair: Fix initial util_avg calculation
docs: cgroup-v1: Clarify that domain levels are system-specific
sched/debug: Dump domains' level
sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level
arch/topology: Fix variable naming to avoid shadowing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
Pull nfsd updates from Chuck Lever:
"This is a light release containing mostly optimizations, code clean-
ups, and minor bug fixes. This development cycle has focused on non-
upstream kernel work:
1. Continuing to build upstream CI for NFSD, based on kdevops
2. Backporting NFSD filecache-related fixes to selected LTS kernels
One notable new feature in v6.10 NFSD is the addition of a new netlink
protocol dedicated to configuring NFSD. A new user space tool,
nfsdctl, is to be added to nfs-utils. Lots more to come here.
As always I am very grateful to NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (29 commits)
NFSD: Force all NFSv4.2 COPY requests to be synchronous
SUNRPC: Fix gss_free_in_token_pages()
NFS/knfsd: Remove the invalid NFS error 'NFSERR_OPNOTSUPP'
knfsd: LOOKUP can return an illegal error value
nfsd: set security label during create operations
NFSD: Add COPY status code to OFFLOAD_STATUS response
NFSD: Record status of async copy operation in struct nfsd4_copy
SUNRPC: Remove comment for sp_lock
NFSD: add listener-{set,get} netlink command
SUNRPC: add a new svc_find_listener helper
SUNRPC: introduce svc_xprt_create_from_sa utility routine
NFSD: add write_version to netlink command
NFSD: convert write_threads to netlink command
NFSD: allow callers to pass in scope string to nfsd_svc
NFSD: move nfsd_mutex handling into nfsd_svc callers
lockd: host: Remove unnecessary statements＇host = NULL;＇
nfsd: don't create nfsv4recoverydir in nfsdfs when not used.
nfsd: optimise recalculate_deny_mode() for a common case
nfsd: add tracepoint in mark_client_expired_locked
nfsd: new tracepoint for check_slot_seqid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- core: simplify POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR handling
- test-power: add POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR support
- chrome EC drivers: add ID based probing
- bq27xxx: simplify update loop to reduce I2C traffic
- max8903 binding: fix GPIO polarity description
* tag 'for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
dt-bindings: power: supply: max8903: specify flt-gpios as input
power: supply: bq27xxx: Move health reading out of update loop
power: supply: bq27xxx: Move cycle count reading out of update loop
power: supply: bq27xxx: Move energy reading out of update loop
power: supply: bq27xxx: Move charge reading out of update loop
power: supply: bq27xxx: Move time reading out of update loop
power: supply: bq27xxx: Move temperature reading out of update loop
power: supply: cros_pchg: provide ID table for avoiding fallback match
power: supply: cros_usbpd: provide ID table for avoiding fallback match
power: supply: core: simplify charge_behaviour formatting
power: supply: test-power: implement charge_behaviour property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"I'm actually surprised this time. There aren't any new Qualcomm SoC
clk drivers. And there's zero diff in the core clk framework.
Instead we have new clk drivers for STM and Sophgo, with
Samsung^WGoogle in third for the diffstat because they introduced HSI0
and HSI2 clk drivers for Google's GS101 SoC (high speed interface
things like PCIe, UFS, and MMC).
Beyond those big diffs there's the usual updates to various clk
drivers for incorrect parent descriptions or mising
MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for
the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and
add actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
dt-bindings: clocks: stm32mp25: add access-controllers description
clock, reset: microchip: move all mpfs reset code to the reset subsystem
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
dt-bindings: clock: fixed: Define a preferred node name
clk: meson: s4: fix module autoloading
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from
the STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
Renesas IPMMU:
- Add support for R8A779H0 hardware
... and a couple smaller fixes and updates across the sub-tree"
* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
iommu/arm-smmu-v3: Make the kunit into a module
arm64: Properly clean up iommu-dma remnants
iommu/amd: Enable Guest Translation after reading IOMMU feature register
iommu/vt-d: Decouple igfx_off from graphic identity mapping
iommu/amd: Fix compilation error
iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
iommu/arm-smmu-v3: Move the CD generation for SVA into a function
iommu/arm-smmu-v3: Allocate the CD table entry in advance
iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
iommu/arm-smmu-v3: Consolidate clearing a CD table entry
iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
iommu/arm-smmu-v3: Add an ops indirection to the STE code
iommu/arm-smmu-qcom: Don't build debug features as a kernel module
iommu/amd: Add SVA domain support
iommu: Add ops->domain_alloc_sva()
iommu/amd: Initial SVA support for AMD IOMMU
iommu/amd: Add support for enable/disable IOPF
iommu/amd: Add IO page fault notifier handler
...
|
