diff options
author | Tang Yuantian <Yuantian.Tang@nxp.com> | 2016-08-09 04:51:22 +0300 |
---|---|---|
committer | Tejun Heo <tj@kernel.org> | 2016-08-10 07:03:33 +0300 |
commit | 16af080e47785d14919bf94bf8a4097c5c8529fb (patch) | |
tree | 76764acbf773889be650df25af68d8f3db9be6af | |
parent | 107a077d19341b4d47ae06f0bd24883b94e64628 (diff) | |
download | linux-16af080e47785d14919bf94bf8a4097c5c8529fb.tar.xz |
ahci: qoriq: enable snoopable sata read and write
By default the SATA IP on the qoriq SoCs does not generating
coherent/snoopable transactions. This patch enable it in the
sata axicc register.
In addition, the dma-coherent property must be set on the
SATA controller nodes.
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 | ||||
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 2 | ||||
-rw-r--r-- | drivers/ata/ahci_qoriq.c | 6 |
3 files changed, 10 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index e669fbd7f9c3..e8e4c3ed1b7e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -495,10 +495,11 @@ }; sata: sata@3200000 { - compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci"; + compatible = "fsl,ls1043a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>; interrupts = <0 69 0x4>; clocks = <&clockgen 4 0>; + dma-coherent; }; msi1: msi-controller1@1571000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 21023a388c29..5ead17c05bb8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -679,6 +679,7 @@ reg = <0x0 0x3200000 0x0 0x10000>; interrupts = <0 133 0x4>; /* Level high type */ clocks = <&clockgen 4 3>; + dma-coherent; }; sata1: sata@3210000 { @@ -687,6 +688,7 @@ reg = <0x0 0x3210000 0x0 0x10000>; interrupts = <0 136 0x4>; /* Level high type */ clocks = <&clockgen 4 3>; + dma-coherent; }; usb0: usb3@3100000 { diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index ed357a184ee4..925c4b6a753b 100644 --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -30,17 +30,20 @@ #define PORT_PHY3 0xB0 #define PORT_PHY4 0xB4 #define PORT_PHY5 0xB8 +#define PORT_AXICC 0xBC #define PORT_TRANS 0xC8 /* port register default value */ #define AHCI_PORT_PHY_1_CFG 0xa003fffe #define AHCI_PORT_TRANS_CFG 0x08000029 +#define AHCI_PORT_AXICC_CFG 0x3fffffff /* for ls1021a */ #define LS1021A_PORT_PHY2 0x28183414 #define LS1021A_PORT_PHY3 0x0e080e06 #define LS1021A_PORT_PHY4 0x064a080b #define LS1021A_PORT_PHY5 0x2aa86470 +#define LS1021A_AXICC_ADDR 0xC0 #define SATA_ECC_DISABLE 0x00020000 @@ -158,16 +161,19 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4); writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + writel(AHCI_PORT_AXICC_CFG, reg_base + LS1021A_AXICC_ADDR); break; case AHCI_LS1043A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); break; case AHCI_LS2080A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); break; } |