diff options
author | Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 2020-04-20 15:30:35 +0300 |
---|---|---|
committer | Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 2020-05-09 19:05:52 +0300 |
commit | 1b00767fd8e1b49685ee7237c3875b8aa998ae3b (patch) | |
tree | cea53c3d4425dac113e83f5ac21975d8ada66848 | |
parent | 10760dde9be317a1abb426b2db9d6a698086cac9 (diff) | |
download | linux-1b00767fd8e1b49685ee7237c3875b8aa998ae3b.tar.xz |
MIPS: Remove PMC MSP71xx platform
No (active) developer owns this hardware, so let's remove Linux support.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
35 files changed, 0 insertions, 5578 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index 9f9b4164d4c9..65c119432e06 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -24,7 +24,6 @@ platforms += netlogic platforms += paravirt platforms += pic32 platforms += pistachio -platforms += pmcs-msp71xx platforms += pnx833x platforms += ralink platforms += rb532 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0aaab09bdea6..f2565a88e086 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -608,30 +608,6 @@ config NXP_STB225 help Support for NXP Semiconductors STB225 Development Board. -config PMC_MSP - bool "PMC-Sierra MSP chipsets" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select SWAP_IO_SPACE - select NO_EXCEPT_FILL - select BOOT_RAW - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_MIPS16 - select IRQ_MIPS_CPU - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select USB_EHCI_BIG_ENDIAN_MMIO - select USB_EHCI_BIG_ENDIAN_DESC - help - This adds support for the PMC-Sierra family of Multi-Service - Processor System-On-A-Chips. These parts include a number - of integrated peripherals, interfaces and DSPs in addition to - a variety of MIPS cores. - config RALINK bool "Ralink based machines" select CEVT_R4K @@ -1076,7 +1052,6 @@ source "arch/mips/jz4740/Kconfig" source "arch/mips/lantiq/Kconfig" source "arch/mips/pic32/Kconfig" source "arch/mips/pistachio/Kconfig" -source "arch/mips/pmcs-msp71xx/Kconfig" source "arch/mips/ralink/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig deleted file mode 100644 index 6ad1a2381226..000000000000 --- a/arch/mips/configs/msp71xx_defconfig +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_LOCALVERSION="-pmc" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_PREEMPT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_PMC_MSP=y -CONFIG_PMC_MSP7120_GW=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_NR_CPUS=2 -CONFIG_PCI=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_INET_AH=y -CONFIG_INET_ESP=y -CONFIG_INET_IPCOMP=y -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_BRIDGE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_RAM=y -CONFIG_MTD_PMC_MSP_EVM=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_PPP=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_PMCMSP=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_STORAGE=y -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_JFFS2_FS=y -CONFIG_SQUASHFS=y -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index dcd6a75277d1..c3bd9b2d66e4 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -42,17 +42,6 @@ #define MACH_DS5900 10 /* DECsystem 5900 */ /* - * Valid machtype for group PMC-MSP - */ -#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ -#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ -#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ -#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ -#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ -#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ -#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ - -/* * Valid machtype for group Mikrotik */ #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h deleted file mode 100644 index 016fa9446ba9..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_mips16 1 -#define cpu_has_dsp 1 -/* #define cpu_has_dsp2 ??? - do runtime detection */ -#define cpu_has_mipsmt 1 -#define cpu_has_fpu 0 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 1 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h deleted file mode 100644 index 50de6876e1c9..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h +++ /dev/null @@ -1,139 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the MSP interrupt controller. - * - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _MSP_CIC_INT_H -#define _MSP_CIC_INT_H - -/* - * The PMC-Sierra CIC interrupts are all centrally managed by the - * CIC sub-system. - * We attempt to keep the interrupt numbers as consistent as possible - * across all of the MSP devices, but some differences will creep in ... - * The interrupts which are directly forwarded to the MIPS core interrupts - * are assigned interrupts in the range 0-7, interrupts cascaded through - * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4 - * (MSP_INT_CIC). Currently we don't really distinguish between VPE1 - * and VPE0 (or thread contexts for that matter). Will have to fix. - * The PER interrupts are assigned interrupts in the range 40-71. -*/ - - -/* - * IRQs directly forwarded to the CPU - */ -#define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ -#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ -#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ -#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ - -/* - * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) - * These defines should be tied to the register definitions for the CIC - * interrupt routine. For now, just use hard-coded values. - */ -#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) -#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) - /* External interrupt 0 */ -#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) - /* External interrupt 1 */ -#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) - /* External interrupt 2 */ -#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) - /* External interrupt 3 */ -#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) - /* CPU interface interrupt */ -#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) - /* External interrupt 4 */ -#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) - /* Cascaded IRQ for USB */ -#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) - /* Sec engine mailbox IRQ */ -#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) - /* External interrupt 5 */ -#define MSP_INT_TDM (MSP_CIC_INTBASE + 9) - /* TDM interrupt */ -#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ -#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ -#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) - /* Cascaded IRQ for sec engine */ -#define MSP_INT_PER (MSP_CIC_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) - /* VPE0 MIPS timer */ -#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) - /* Block Copy */ -#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) - /* UART 0 */ -#define MSP_INT_PCI (MSP_CIC_INTBASE + 20) - /* PCI subsystem */ -#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) - /* External interrupt 5 */ -#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) - /* PCI Message Signal */ -#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) - /* Cascaded ADSL2+ SAR IRQ */ -#define MSP_INT_DSL (MSP_CIC_INTBASE + 24) - /* ADSL2+ IRQ */ -#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) - /* SLP error condition */ -#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) - /* VPE1 MIPS timer */ -#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) - /* VPE0 Performance counter */ -#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) - /* VPE1 Performance counter */ -#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) - /* External interrupt 5 */ -#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) - /* VPE0 Software interrupt */ -#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) - /* VPE0 Software interrupt */ - -/* - * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) - */ -#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) -/* Reserved 0-1 */ -#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ -#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ -#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) - /* Peripheral timer block out 0 */ -#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) - /* Peripheral timer block out 1 */ -/* Reserved 9 */ -#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ -#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ -#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ -#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ - -#endif /* !_MSP_CIC_INT_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h deleted file mode 100644 index daacebb047c2..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h +++ /dev/null @@ -1,343 +0,0 @@ -/* - * - * Macros for external SMP-safe access to the PMC MSP71xx reference - * board GPIO pins - * - * Copyright 2010 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MSP_GPIO_MACROS_H__ -#define __MSP_GPIO_MACROS_H__ - -#include <msp_regops.h> -#include <msp_regs.h> - -#ifdef CONFIG_PMC_MSP7120_GW -#define MSP_NUM_GPIOS 20 -#else -#define MSP_NUM_GPIOS 28 -#endif - -/* -- GPIO Enumerations -- */ -enum msp_gpio_data { - MSP_GPIO_LO = 0, - MSP_GPIO_HI = 1, - MSP_GPIO_NONE, /* Special - Means pin is out of range */ - MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */ -}; - -enum msp_gpio_mode { - MSP_GPIO_INPUT = 0x0, - /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */ - MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */ - MSP_GPIO_OUTPUT = 0x8, - MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */ - MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */ - MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */ - MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */ -}; - -/* -- Static Tables -- */ - -/* Maps pins to data register */ -static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = { - /* GPIO 0 and 1 on the first register */ - GPIO_DATA1_REG, GPIO_DATA1_REG, - /* GPIO 2, 3, 4, and 5 on the second register */ - GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, - /* GPIO 6, 7, 8, and 9 on the third register */ - GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, - /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ - GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, - GPIO_DATA4_REG, GPIO_DATA4_REG, - /* GPIO 16 - 23 on the first strange EXTENDED register */ - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - /* GPIO 24 - 27 on the second strange EXTENDED register */ - EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, - EXTENDED_GPIO2_REG, -}; - -/* Maps pins to mode register */ -static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = { - /* GPIO 0 and 1 on the first register */ - GPIO_CFG1_REG, GPIO_CFG1_REG, - /* GPIO 2, 3, 4, and 5 on the second register */ - GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, - /* GPIO 6, 7, 8, and 9 on the third register */ - GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, - /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ - GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, - GPIO_CFG4_REG, GPIO_CFG4_REG, - /* GPIO 16 - 23 on the first strange EXTENDED register */ - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - /* GPIO 24 - 27 on the second strange EXTENDED register */ - EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, - EXTENDED_GPIO2_REG, -}; - -/* Maps 'basic' pins to relative offset from 0 per register */ -static int MSP_GPIO_OFFSET[] = { - /* GPIO 0 and 1 on the first register */ - 0, 0, - /* GPIO 2, 3, 4, and 5 on the second register */ - 2, 2, 2, 2, - /* GPIO 6, 7, 8, and 9 on the third register */ - 6, 6, 6, 6, - /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ - 10, 10, 10, 10, 10, 10, -}; - -/* Maps MODE to allowed pin mask */ -static unsigned int MSP_GPIO_MODE_ALLOWED[] = { - 0xffffffff, /* Mode 0 - INPUT */ - 0x00000, /* Mode 1 - INTERRUPT */ - 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/ - 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */ - 0xffffffff, /* Mode 8 - OUTPUT */ - 0x0000f, /* Mode 9 - UART_OUTPUT/ - PERF_TIMERA (GPIO 0, 1, 2, 3) */ - 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */ - 0x00000, /* Mode b - Not really a mode! */ -}; - -/* -- Bit masks -- */ - -/* This gives you the 'register relative offset gpio' number */ -#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio]) - -/* These take the 'register relative offset gpio' number */ -#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio) -#define BASIC_MODE_REG_VALUE(mode, ogpio) \ - (mode << BASIC_MODE_REG_SHIFT(ogpio)) -#define BASIC_MODE_REG_MASK(ogpio) \ - BASIC_MODE_REG_VALUE(0xf, ogpio) -#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4) -#define BASIC_MODE_REG_FROM_REG(data, ogpio) \ - ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio)) - -/* These take the actual GPIO number (0 through 15) */ -#define BASIC_DATA_MASK(gpio) \ - BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_MASK(gpio) \ - BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE(mode, gpio) \ - BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_SHIFT(gpio) \ - BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_FROM_REG(data, gpio) \ - BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio)) - -/* - * Each extended GPIO register is 32 bits long and is responsible for up to - * eight GPIOs. The least significant 16 bits contain the set and clear bit - * pair for each of the GPIOs. The most significant 16 bits contain the - * disable and enable bit pair for each of the GPIOs. For example, the - * extended GPIO reg for GPIOs 16-23 is as follows: - * - * 31: GPIO23_DISABLE - * ... - * 19: GPIO17_DISABLE - * 18: GPIO17_ENABLE - * 17: GPIO16_DISABLE - * 16: GPIO16_ENABLE - * ... - * 3: GPIO17_SET - * 2: GPIO17_CLEAR - * 1: GPIO16_SET - * 0: GPIO16_CLEAR - */ - -/* This gives the 'register relative offset gpio' number */ -#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24) - -/* These take the 'register relative offset gpio' number */ -#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16)) -#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16)) -#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2)) -#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2)) - -/* These take the actual GPIO number (16 through 27) */ -#define EXTENDED_DISABLE(gpio) \ - EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio)) -#define EXTENDED_ENABLE(gpio) \ - EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio)) -#define EXTENDED_SET(gpio) \ - EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio)) -#define EXTENDED_CLR(gpio) \ - EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio)) - -#define EXTENDED_FULL_MASK (0xffffffff) - -/* -- API inline-functions -- */ - -/* - * Gets the current value of the specified pin - */ -static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio) -{ - u32 pinhi_mask = 0, pinhi_mask2 = 0; - - if (gpio >= MSP_NUM_GPIOS) - return MSP_GPIO_NONE; - - if (gpio < 16) { - pinhi_mask = BASIC_DATA_MASK(gpio); - } else { - /* - * Two cases are possible with the EXTENDED register: - * - In output mode (ENABLED flag set), check the CLR bit - * - In input mode (ENABLED flag not set), check the SET bit - */ - pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio); - pinhi_mask2 = EXTENDED_SET(gpio); - } - if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) || - (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2)) - return MSP_GPIO_HI; - else - return MSP_GPIO_LO; -} - -/* Sets the specified pin to the specified value */ -static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio) -{ - if (gpio >= MSP_NUM_GPIOS) - return; - - if (gpio < 16) { - if (data == MSP_GPIO_TOGGLE) - toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio], - BASIC_DATA_MASK(gpio)); - else if (data == MSP_GPIO_HI) - set_reg32(MSP_GPIO_DATA_REGISTER[gpio], - BASIC_DATA_MASK(gpio)); - else - clear_reg32(MSP_GPIO_DATA_REGISTER[gpio], - BASIC_DATA_MASK(gpio)); - } else { - if (data == MSP_GPIO_TOGGLE) { - /* Special ugly case: - * We have to read the CLR bit. - * If set, we write the CLR bit. - * If not, we write the SET bit. - */ - u32 tmpdata; - - custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio], - tmpdata); - if (tmpdata & EXTENDED_CLR(gpio)) - tmpdata = EXTENDED_CLR(gpio); - else - tmpdata = EXTENDED_SET(gpio); - custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio], - tmpdata); - } else { - u32 newdata; - - if (data == MSP_GPIO_HI) - newdata = EXTENDED_SET(gpio); - else - newdata = EXTENDED_CLR(gpio); - set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio], - EXTENDED_FULL_MASK, newdata); - } - } -} - -/* Sets the specified pin to the specified value */ -static inline void msp_gpio_pin_hi(unsigned int gpio) -{ - msp_gpio_pin_set(MSP_GPIO_HI, gpio); -} - -/* Sets the specified pin to the specified value */ -static inline void msp_gpio_pin_lo(unsigned int gpio) -{ - msp_gpio_pin_set(MSP_GPIO_LO, gpio); -} - -/* Sets the specified pin to the opposite value */ -static inline void msp_gpio_pin_toggle(unsigned int gpio) -{ - msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio); -} - -/* Gets the mode of the specified pin */ -static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio) -{ - enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN; - uint32_t data; - - if (gpio >= MSP_NUM_GPIOS) - return retval; - - data = *MSP_GPIO_MODE_REGISTER[gpio]; - - if (gpio < 16) { - retval = BASIC_MODE_FROM_REG(data, gpio); - } else { - /* Extended pins can only be either INPUT or OUTPUT */ - if (data & EXTENDED_ENABLE(gpio)) - retval = MSP_GPIO_OUTPUT; - else - retval = MSP_GPIO_INPUT; - } - - return retval; -} - -/* - * Sets the specified mode on the requested pin - * Returns 0 on success, or -1 if that mode is not allowed on this pin - */ -static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio) -{ - u32 modemask, newmode; - - if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode]) - return -1; - - if (gpio >= MSP_NUM_GPIOS) - return -1; - - if (gpio < 16) { - modemask = BASIC_MODE_MASK(gpio); - newmode = BASIC_MODE(mode, gpio); - } else { - modemask = EXTENDED_FULL_MASK; - if (mode == MSP_GPIO_INPUT) - newmode = EXTENDED_DISABLE(gpio); - else - newmode = EXTENDED_ENABLE(gpio); - } - /* Do the set atomically */ - set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode); - - return 0; -} - -#endif /* __MSP_GPIO_MACROS_H__ */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h deleted file mode 100644 index 55078b40f5b5..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the MSP interrupt handlers. - * - * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _MSP_INT_H -#define _MSP_INT_H - -/* - * The PMC-Sierra MSP product line has at least two different interrupt - * controllers, the SLP register based scheme and the CIC interrupt - * controller block mechanism. This file distinguishes between them - * so that devices see a uniform interface. - */ - -#if defined(CONFIG_IRQ_MSP_SLP) - #include "msp_slp_int.h" -#elif defined(CONFIG_IRQ_MSP_CIC) - #include "msp_cic_int.h" -#else - #error "What sort of interrupt controller does *your* MSP have?" -#endif - -#endif /* !_MSP_INT_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h deleted file mode 100644 index 5b2535efceb2..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h +++ /dev/null @@ -1,189 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 2000-2006 PMC-Sierra INC. - * - * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS - * SOFTWARE. - */ - -#ifndef _MSP_PCI_H_ -#define _MSP_PCI_H_ - -#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) - -/* - * It is convenient to program the OATRAN register so that - * Athena virtual address space and PCI address space are - * the same. This is not a requirement, just a convenience. - * - * The only hard restrictions on the value of OATRAN is that - * OATRAN must not be programmed to allow translated memory - * addresses to fall within the lowest 512MB of - * PCI address space. This region is hardcoded - * for use as Athena PCI Host Controller target - * access memory space to the Athena's SDRAM. - * - * Note that OATRAN applies only to memory accesses, not - * to I/O accesses. - * - * To program OATRAN to make Athena virtual address space - * and PCI address space have the same values, OATRAN - * is to be programmed to 0xB8000000. The top seven - * bits of the value mimic the seven bits clipped off - * by the PCI Host controller. - * - * With OATRAN at the said value, when the CPU does - * an access to its virtual address at, say 0xB900_5000, - * the address appearing on the PCI bus will be - * 0xB900_5000. - * - Michael Penner - */ -#define MSP_PCI_OATRAN 0xB8000000UL - -#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL) -#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000) -#define MSP_PCI_SPACE_END \ - (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1) -#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL) -#define MSP_PCI_IOSPACE_SIZE 0x1000 -#define MSP_PCI_IOSPACE_END \ - (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1) - -/* IRQ for PCI status interrupts */ -#define PCI_STAT_IRQ 20 - -#define QFLUSH_REG_1 0xB7F40000 - -typedef volatile unsigned int pcireg; -typedef void * volatile ppcireg; - -struct pci_block_copy -{ - pcireg unused1; /* +0x00 */ - pcireg unused2; /* +0x04 */ - ppcireg unused3; /* +0x08 */ - ppcireg unused4; /* +0x0C */ - pcireg unused5; /* +0x10 */ - pcireg unused6; /* +0x14 */ - pcireg unused7; /* +0x18 */ - ppcireg unused8; /* +0x1C */ - ppcireg unused9; /* +0x20 */ - pcireg unusedA; /* +0x24 */ - ppcireg unusedB; /* +0x28 */ - ppcireg unusedC; /* +0x2C */ -}; - -enum -{ - config_device_vendor, /* 0 */ - config_status_command, /* 1 */ - config_class_revision, /* 2 */ - config_BIST_header_latency_cache, /* 3 */ - config_BAR0, /* 4 */ - config_BAR1, /* 5 */ - config_BAR2, /* 6 */ - config_not_used7, /* 7 */ - config_not_used8, /* 8 */ - config_not_used9, /* 9 */ - config_CIS, /* 10 */ - config_subsystem, /* 11 */ - config_not_used12, /* 12 */ - config_capabilities, /* 13 */ - config_not_used14, /* 14 */ - config_lat_grant_irq, /* 15 */ - config_message_control,/* 16 */ - config_message_addr, /* 17 */ - config_message_data, /* 18 */ - config_VPD_addr, /* 19 */ - config_VPD_data, /* 20 */ - config_maxregs /* 21 - number of registers */ -}; - -struct msp_pci_regs -{ - pcireg hop_unused_00; /* +0x00 */ - pcireg hop_unused_04; /* +0x04 */ - pcireg hop_unused_08; /* +0x08 */ - pcireg hop_unused_0C; /* +0x0C */ - pcireg hop_unused_10; /* +0x10 */ - pcireg hop_unused_14; /* +0x14 */ - pcireg hop_unused_18; /* +0x18 */ - pcireg hop_unused_1C; /* +0x1C */ - pcireg hop_unused_20; /* +0x20 */ - pcireg hop_unused_24; /* +0x24 */ - pcireg hop_unused_28; /* +0x28 */ - pcireg hop_unused_2C; /* +0x2C */ - pcireg hop_unused_30; /* +0x30 */ - pcireg hop_unused_34; /* +0x34 */ - pcireg if_control; /* +0x38 */ - pcireg oatran; /* +0x3C */ - pcireg reset_ctl; /* +0x40 */ - pcireg config_addr; /* +0x44 */ - pcireg hop_unused_48; /* +0x48 */ - pcireg msg_signaled_int_status; /* +0x4C */ - pcireg msg_signaled_int_mask; /* +0x50 */ - pcireg if_status; /* +0x54 */ - pcireg if_mask; /* +0x58 */ - pcireg hop_unused_5C; /* +0x5C */ - pcireg hop_unused_60; /* +0x60 */ - pcireg hop_unused_64; /* +0x64 */ - pcireg hop_unused_68; /* +0x68 */ - pcireg hop_unused_6C; /* +0x6C */ - pcireg hop_unused_70; /* +0x70 */ - - struct pci_block_copy pci_bc[2] __attribute__((aligned(64))); - - pcireg error_hdr1; /* +0xE0 */ - pcireg error_hdr2; /* +0xE4 */ - - pcireg config[config_maxregs] __attribute__((aligned(256))); - -}; - -#define BPCI_CFGADDR_BUSNUM_SHF 16 -#define BPCI_CFGADDR_FUNCTNUM_SHF 8 -#define BPCI_CFGADDR_REGNUM_SHF 2 -#define BPCI_CFGADDR_ENABLE (1<<31) - -#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */ -#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */ -#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */ -#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */ -#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */ -#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */ -#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */ - -#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */ -#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */ -#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */ -#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */ -#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */ -#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */ -#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */ -#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */ -#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */ -#define BPCI_IFSTATUS_SER (1<<19) /* System error */ -#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */ -#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */ -#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */ -#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */ -#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */ -#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */ -#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */ -#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ -#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ - -#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ -#define BPCI_RESETCTL_RT (1<<4) /* Release time */ -#define BPCI_RESETCTL_CT (1<<8) /* Config time */ -#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ -#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ -#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ - -extern struct msp_pci_regs msp_pci_regs - __attribute__((section(".register"))); -extern unsigned long msp_pci_config_space - __attribute__((section(".register"))); - -#endif /* !_MSP_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h deleted file mode 100644 index 4120a01c30a9..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h +++ /dev/null @@ -1,159 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MIPS boards bootprom interface for the Linux kernel. - * - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _ASM_MSP_PROM_H -#define _ASM_MSP_PROM_H - -#include <linux/types.h> - -#define DEVICEID "deviceid" -#define FEATURES "features" -#define PROM_ENV "prom_env" -#define PROM_ENV_FILE "/proc/"PROM_ENV -#define PROM_ENV_SIZE 256 - -#define CPU_DEVID_FAMILY 0x0000ff00 -#define CPU_DEVID_REVISION 0x000000ff - -#define FPGA_IS_POLO(revision) \ - (((revision >= 0xb0) && (revision < 0xd0))) -#define FPGA_IS_5000(revision) \ - ((revision >= 0x80) && (revision <= 0x90)) -#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) -#define FPGA_IS_DUET(revision) \ - (((revision >= 0xa0) && (revision < 0xb0))) -#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) -#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0)) - -#define MACHINE_TYPE_POLO "POLO" -#define MACHINE_TYPE_DUET "DUET" -#define MACHINE_TYPE_ZEUS "ZEUS" -#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" -#define MACHINE_TYPE_MSP5000 "MSP5000" -#define MACHINE_TYPE_MSP4200 "MSP4200" -#define MACHINE_TYPE_MSP7120 "MSP7120" -#define MACHINE_TYPE_MSP7130 "MSP7130" -#define MACHINE_TYPE_OTHER "OTHER" - -#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" -#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" -#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" -#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" -#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" -#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" -#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA" -#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA" - -/* Device Family definitions */ -#define FAMILY_FPGA 0x0000 -#define FAMILY_ZEUS 0x1000 -#define FAMILY_POLO 0x2000 -#define FAMILY_DUET 0x4000 -#define FAMILY_TRIAD 0x5000 -#define FAMILY_MSP4200 0x4200 -#define FAMILY_MSP4200_FPGA 0x4f00 -#define FAMILY_MSP7100 0x7100 -#define FAMILY_MSP7100_FPGA 0x7f00 - -/* Device Type definitions */ -#define TYPE_MSP7120 0x7120 -#define TYPE_MSP7130 0x7130 - -#define ENET_KEY 'E' -#define ENETTXD_KEY 'e' -#define PCI_KEY 'P' -#define PCIMUX_KEY 'p' -#define SEC_KEY 'S' -#define SPAD_KEY 'D' -#define TDM_KEY 'T' -#define ZSP_KEY 'Z' - -#define FEATURE_NOEXIST '-' -#define FEATURE_EXIST '+' - -#define ENET_MII 'M' -#define ENET_RMII 'R' - -#define ENETTXD_FALLING 'F' -#define ENETTXD_RISING 'R' - -#define PCI_HOST 'H' -#define PCI_PERIPHERAL 'P' - -#define PCIMUX_FULL 'F' -#define PCIMUX_SINGLE 'S' - -#define SEC_DUET 'D' -#define SEC_POLO 'P' -#define SEC_SLOW 'S' -#define SEC_TRIAD 'T' - -#define SPAD_POLO 'P' - -#define TDM_DUET 'D' /* DUET TDMs might exist */ -#define TDM_POLO 'P' /* POLO TDMs might exist */ -#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */ - -#define ZSP_DUET 'D' /* one DUET zsp engine */ -#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */ - -extern char *prom_getenv(char *name); -extern void prom_init_cmdline(void); -extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, - unsigned long end_mem); - -extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr); -extern unsigned long get_deviceid(void); -extern char identify_enet(unsigned long interface_num); -extern char identify_enetTxD(unsigned long interface_num); -extern char identify_pci(void); -extern char identify_sec(void); -extern char identify_spad(void); -extern char identify_sec(void); -extern char identify_tdm(void); -extern char identify_zsp(void); -extern unsigned long identify_family(void); -extern unsigned long identify_revision(void); - -/* - * The following macro calls prom_printf and puts the format string - * into an init section so it can be reclaimed. - */ -#define ppfinit(f, x...) \ - do { \ - static char _f[] __initdata = KERN_INFO f; \ - printk(_f, ## x); \ - } while (0) - -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */ - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; - -struct prom_pmemblock { - unsigned long base; /* Within KSEG0. */ - unsigned int size; /* In bytes. */ - unsigned int type; /* free or prom memory */ -}; - -extern int prom_argc; -extern char **prom_argv; -extern char **prom_envp; -extern int *prom_vec; -extern struct prom_pmemblock *prom_getmdesc(void); - -#endif /* !_ASM_MSP_PROM_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h deleted file mode 100644 index 90dbe43c8d27..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h +++ /dev/null @@ -1,237 +0,0 @@ -/* - * SMP/VPE-safe functions to access "registers" (see note). - * - * NOTES: -* - These macros use ll/sc instructions, so it is your responsibility to - * ensure these are available on your platform before including this file. - * - The MIPS32 spec states that ll/sc results are undefined for uncached - * accesses. This means they can't be used on HW registers accessed - * through kseg1. Code which requires these macros for this purpose must - * front-end the registers with cached memory "registers" and have a single - * thread update the actual HW registers. - * - A maximum of 2k of code can be inserted between ll and sc. Every - * memory accesses between the instructions will increase the chance of - * sc failing and having to loop. - * - When using custom_read_reg32/custom_write_reg32 only perform the - * necessary logical operations on the register value in between these - * two calls. All other logic should be performed before the first call. - * - There is a bug on the R10000 chips which has a workaround. If you - * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR' - * to be non-zero. If you are using this header from within linux, you may - * include <asm/war.h> before including this file to have this defined - * appropriately for you. - * - * Copyright 2005-2007 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO - * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., 675 - * Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_REGOPS_H__ -#define __ASM_REGOPS_H__ - -#include <linux/types.h> - -#include <asm/compiler.h> -#include <asm/war.h> - -#ifndef R10000_LLSC_WAR -#define R10000_LLSC_WAR 0 -#endif - -#if R10000_LLSC_WAR == 1 -#define __beqz "beqzl " -#else -#define __beqz "beqz " -#endif - -#ifndef _LINUX_TYPES_H -typedef unsigned int u32; -#endif - -/* - * Sets all the masked bits to the corresponding value bits - */ -static inline void set_value_reg32(volatile u32 *const addr, - u32 const mask, - u32 const value) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # set_value_reg32 \n" - " and %0, %2 \n" - " or %0, %3 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (~mask), "ir" (value), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Sets all the masked bits to '1' - */ -static inline void set_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # set_reg32 \n" - " or %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Sets all the masked bits to '0' - */ -static inline void clear_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # clear_reg32 \n" - " and %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (~mask), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Toggles all masked bits from '0' to '1' and '1' to '0' - */ -static inline void toggle_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # toggle_reg32 \n" - " xor %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Read all masked bits others are returned as '0' - */ -static inline u32 read_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " lw %0, %1 # read \n" - " and %0, %2 # mask \n" - " .set pop \n" - : "=&r" (temp) - : "m" (*addr), "ir" (mask)); - - return temp; -} - -/* - * blocking_read_reg32 - Read address with blocking load - * - * Uncached writes need to be read back to ensure they reach RAM. - * The returned value must be 'used' to prevent from becoming a - * non-blocking load. - */ -static inline u32 blocking_read_reg32(volatile u32 *const addr) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " lw %0, %1 # read \n" - " move %0, %0 # block \n" - " .set pop \n" - : "=&r" (temp) - : "m" (*addr)); - - return temp; -} - -/* - * For special strange cases only: - * - * If you need custom processing within a ll/sc loop, use the following macros - * VERY CAREFULLY: - * - * u32 tmp; <-- Define a variable to hold the data - * - * custom_read_reg32(address, tmp); <-- Reads the address and put the value - * in the 'tmp' variable given - * - * From here on out, you are (basically) atomic, so don't do anything too - * fancy! - * Also, this code may loop if the end of this block fails to write - * everything back safely due do the other CPU, so do NOT do anything - * with side-effects! - * - * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely. - */ -#define custom_read_reg32(address, tmp) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set arch=r4000 \n" \ - "1: ll %0, %1 #custom_read_reg32 \n" \ - " .set pop \n" \ - : "=r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \ - : GCC_OFF_SMALL_ASM() (*address)) - -#define custom_write_reg32(address, tmp) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set arch=r4000 \n" \ - " sc %0, %1 #custom_write_reg32 \n" \ - " "__beqz"%0, 1b \n" \ - " nop \n" \ - " .set pop \n" \ - : "=&r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \ - : "0" (tmp), GCC_OFF_SMALL_ASM() (*address)) - -#endif /* __ASM_REGOPS_H__ */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h deleted file mode 100644 index e2ce9be51f3f..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h +++ /dev/null @@ -1,652 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the address space, registers and register configuration - * (bit masks, access macros etc) for the PMC-Sierra line of MSP products. - * This file contains addess maps for all the devices in the line of - * products but only has register definitions and configuration masks for - * registers which aren't definitely associated with any device. Things - * like clock settings, reset access, the ELB etc. Individual device - * drivers will reference the appropriate XXX_BASE value defined here - * and have individual registers offset from that. - * - * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved. - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#include <asm/addrspace.h> -#include <linux/types.h> - -#ifndef _ASM_MSP_REGS_H -#define _ASM_MSP_REGS_H - -/* - ######################################################################## - # Address space and device base definitions # - ######################################################################## - */ - -/* - *************************************************************************** - * System Logic and Peripherals (ELB, UART0, etc) device address space * - *************************************************************************** - */ -#define MSP_SLP_BASE 0x1c000000 - /* System Logic and Peripherals */ -#define MSP_RST_BASE (MSP_SLP_BASE + 0x10) - /* System reset register base */ -#define MSP_RST_SIZE 0x0C /* System reset register space */ - -#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) - /* watchdog timer base */ -#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) - /* internal timer base */ -#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) - /* UART0 controller base */ -#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) - /* Block Copy controller base */ -#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) - /* Block Copy descriptor base */ - -/* - *************************************************************************** - * PCI address space * - *************************************************************************** - */ -#define MSP_PCI_BASE 0x19000000 - -/* - *************************************************************************** - * MSbus device address space * - *************************************************************************** - */ -#define MSP_MSB_BASE 0x18000000 - /* MSbus address start */ -#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) - /* Peripheral device registers */ -#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) - /* MAC A device registers */ -#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) - /* MAC B device registers */ -#define MSP_MAC_SIZE 0xE0 /* MAC register space */ - -#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) - /* Security Engine registers */ -#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) - /* MAC C device registers */ -#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) - /* ADSL2 device registers */ -#define MSP_USB0_BASE (MSP_MSB_BASE + 0xB00000) - /* USB0 device registers */ -#define MSP_USB1_BASE (MSP_MSB_BASE + 0x300000) - /* USB1 device registers */ -#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) - /* CPU interface registers */ - -/* Devices within the MSbus peripheral block */ -#define MSP_UART1_BASE (MSP_PER_BASE + 0x030) - /* UART1 controller base */ -#define MSP_SPI_BASE (MSP_PER_BASE + 0x058) - /* SPI/MPI control registers */ -#define MSP_TWI_BASE (MSP_PER_BASE + 0x090) - /* Two-wire control registers */ -#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) - /* Programmable timer control */ - -/* - *************************************************************************** - * Physical Memory configuration address space * - *************************************************************************** - */ -#define MSP_MEM_CFG_BASE 0x17f00000 - -#define MSP_MEM_INDIRECT_CTL_10 0x10 - -/* - * Notes: - * 1) The SPI registers are split into two blocks, one offset from the - * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by - * 0x68. The SPI driver definitions for the register must be aware - * of this. - * 2) The block copy engine register are divided into two regions, one - * for the control/configuration of the engine proper and one for the - * values of the descriptors used in the copy process. These have - * different base defines (CTRL_BASE vs DESC_BASE) - * 3) These constants are for physical addresses which means that they - * work correctly with "ioremap" and friends. This means that device - * drivers will need to remap these addresses using ioremap and perhaps - * the readw/writew macros. Or they could use the regptr() macro - * defined below, but the readw/writew calls are the correct thing. - * 4) The UARTs have an additional status register offset from the base - * address. This register isn't used in the standard 8250 driver but - * may be used in other software. Consult the hardware datasheet for - * offset details. - * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers - * start at an offset of 0x84 from the base address but the block of - * registers before this is reserved for the security engine. The - * driver will have to be aware of this but it makes the register - * definitions line up better with the documentation. - */ - -/* - ######################################################################## - # System register definitions. Not associated with a specific device # - ######################################################################## - */ - -/* - * This macro maps the physical register number into uncached space - * and (for C code) casts it into a u32 pointer so it can be dereferenced - * Normally these would be accessed with ioremap and readX/writeX, but - * these are convenient for a lot of internal kernel code. - */ -#ifdef __ASSEMBLER__ - #define regptr(addr) (KSEG1ADDR(addr)) -#else - #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr))) -#endif - -/* - *************************************************************************** - * System Logic and Peripherals (RESET, ELB, etc) registers * - *************************************************************************** - */ - -/* System Control register definitions */ -#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) - /* Device-ID RO */ -#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) - /* Firmware-ID Register RW */ -#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) - /* System-ID Register-0 RW */ -#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) - /* System-ID Register-1 RW */ - -/* System Reset register definitions */ -#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) - /* System Reset Status RO */ -#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) - /* System Set Reset WO */ -#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) - /* System Clear Reset WO */ - -/* System Clock Registers */ -#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) - /* PCI clock generator RW */ -#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) - /* UART clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x24) */ -/* reserved (MSP_SLP_BASE + 0x28) */ -#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) - /* PLL1 clock generator RW */ -#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) - /* PLL0 clock generator RW */ -#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) - /* MIPS clock generator RW */ -#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) - /* Voice Eng clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x3C) */ -#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) - /* MS-Bus clock generator RW */ -#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) - /* Sec & MAC clock generator RW */ -#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48) - /* Per & TDM clock generator RW */ - -/* Interrupt Controller Registers */ -#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70) - /* Interrupt status register RW */ -#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74) - /* Interrupt enable/mask RW */ -#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) - /* Security Engine mailbox RW */ -#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) - /* Voice Engine mailbox RW */ - -/* ELB Controller Registers */ -#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) - /* ELB CS0 Configuration Reg */ -#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) - /* ELB CS0 Base Address Reg */ -#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) - /* ELB CS0 Mask Register */ -#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) - /* ELB CS0 access register */ - -#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) - /* ELB CS1 Configuration Reg */ -#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) - /* ELB CS1 Base Address Reg */ -#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) - /* ELB CS1 Mask Register */ -#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) - /* ELB CS1 access register */ - -#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) - /* ELB CS2 Configuration Reg */ -#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) - /* ELB CS2 Base Address Reg */ -#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) - /* ELB CS2 Mask Register */ -#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) - /* ELB CS2 access register */ - -#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) - /* ELB CS3 Configuration Reg */ -#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) - /* ELB CS3 Base Address Reg */ -#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) - /* ELB CS3 Mask Register */ -#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) - /* ELB CS3 access register */ - -#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) - /* ELB CS4 Configuration Reg */ -#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) - /* ELB CS4 Base Address Reg */ -#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) - /* ELB CS4 Mask Register */ -#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) - /* ELB CS4 access register */ - -#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) - /* ELB CS5 Configuration Reg */ -#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) - /* ELB CS5 Base Address Reg */ -#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) - /* ELB CS5 Mask Register */ -#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) - /* ELB CS5 access register */ - -/* reserved 0xE0 - 0xE8 */ -#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) - /* ELB single PC card detect */ - -/* reserved 0xF0 - 0xF8 */ -#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) - /* SDRAM read/ELB timing Reg */ - -/* Extended UART status registers */ -#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) - /* UART Status Register 0 */ -#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) - /* UART Status Register 1 */ - -/* Performance monitoring registers */ -#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) - /* Performance monitor control */ -#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) - /* Performance monitor clear */ -#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) - /* Perf monitor counter high */ -#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) - /* Perf monitor counter low */ - -/* System control registers */ -#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) - /* System control register */ -#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) - /* System Error status 1 */ -#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) - /* System Error status 2 */ -#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) - /* System Interrupt config */ - -/* Voice Engine Memory configuration */ -#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) - /* Voice engine memory config */ - -/* CPU/SLP Error Status registers */ -#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) - /* CPU/SLP Error status 1 */ -#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) - /* CPU/SLP Error status 1 */ - -/* Extended GPIO registers */ -#define EXTENDED_GPIO1_REG regptr(MSP_SLP_BASE + 0x188) -#define EXTENDED_GPIO2_REG regptr(MSP_SLP_BASE + 0x18c) -#define EXTENDED_GPIO_REG EXTENDED_GPIO1_REG - /* Backward-compatibility */ - -/* System Error registers */ -#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) - /* Int status for SLP errors */ -#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) - /* Int mask for SLP errors */ -#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) - /* External ELB reset */ -#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) - /* Boot Status */ - -/* Extended ELB addressing */ -#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) - /* CS0 Extended address */ -#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) - /* CS1 Extended address */ -#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) - /* CS2 Extended address */ -#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) - /* CS3 Extended address */ -/* reserved 0x1B0 */ -#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) - /* CS5 Extended address */ - -/* PLL Adjustment registers */ -#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) - /* PLL0 lock status */ -#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) - /* PLL Analog reset status */ -#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) - /* PLL0 Adjustment value */ -#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) - /* PLL1 Adjustment value */ - -/* - *************************************************************************** - * Peripheral Register definitions * - *************************************************************************** - */ - -/* Peripheral status */ -#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) - /* Peripheral control register */ -#define PER_STS_REG regptr(MSP_PER_BASE + 0x54) - /* Peripheral status register */ - -/* SPI/MPI Registers */ -#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) - /* SPI/MPI Tx Size register */ -#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) - /* SPI/MPI Rx Size register */ -#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) - /* SPI/MPI Control register */ -#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) - /* SPI/MPI Chip Select reg */ -#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) - /* SPI/MPI Core Data reg */ -#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) - /* SPI/MPI Core Control reg */ -#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) - /* SPI/MPI Core Status reg */ -#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) - /* SPI/MPI Core Ssel reg */ -#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) - /* SPI/MPI Data FIFO reg */ - -/* Peripheral Block Error Registers */ -#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) - /* Error Bit Status Register */ -#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) - /* Error Bit Mask Register */ -#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) - /* Error Header 1 Register */ -#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) - /* Error Header 2 Register */ - -/* Peripheral Block Interrupt Registers */ -#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) - /* Interrupt status register */ -#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) - /* Interrupt Mask Register */ -#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) - /* GPIO interrupt status reg */ -#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) - /* GPIO interrupt MASK Reg */ - -/* POLO GPIO registers */ -#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) - /* Polo GPIO[8:0] data reg */ -#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) - /* Polo GPIO[7:0] config reg */ -#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) - /* Polo GPIO[15:8] config reg */ -#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) - /* Polo GPIO[31:0] output drive */ -#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) - /* Polo GPIO[23:16] config reg */ -#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) - /* Polo GPIO[15:9] data reg */ -#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) - /* Polo GPIO[23:16] data reg */ -#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) - /* Polo GPIO[31:24] data reg */ -#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) - /* Polo GPIO[39:32] data reg */ -#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) - /* Polo GPIO[47:40] data reg */ -#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) - /* Polo GPIO[54:48] data reg */ -#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* Polo GPIO[31:24] config reg */ -#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) - /* Polo GPIO[39:32] config reg */ -#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) - /* Polo GPIO[47:40] config reg */ -#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) - /* Polo GPIO[54:48] config reg */ -#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) - /* Polo GPIO[54:32] output drive */ - -/* Generic GPIO registers */ -#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) - /* GPIO[1:0] data register */ -#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) - /* GPIO[5:2] data register */ -#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) - /* GPIO[9:6] data register */ -#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) - /* GPIO[15:10] data register */ -#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) - /* GPIO[1:0] config register */ -#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) - /* GPIO[5:2] config register */ -#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) - /* GPIO[9:6] config register */ -#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* GPIO[15:10] config register */ -#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) - /* GPIO[15:0] output drive */ - -/* - *************************************************************************** - * CPU Interface register definitions * - *************************************************************************** - */ -#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) - /* PCI-SDRAM queue flush trigger */ -#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) - /* OCP Error Attribute 1 */ -#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) - /* OCP Error Attribute 2 */ -#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) - /* OCP Error Status */ -#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) - /* CPU policy configuration */ -#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) - /* Misc configuration options */ - -/* Central Interrupt Controller Registers */ -#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) - /* Central Interrupt registers */ -#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) - /* External interrupt config */ -#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) - /* CIC Interrupt Status */ -#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) - /* VPE0 Interrupt Mask */ -#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) - /* VPE1 Interrupt Mask */ -#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) - /* Thread Context 0 Int Mask */ -#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) - /* Thread Context 1 Int Mask */ -#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 2 Int Mask */ -#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 3 Int Mask */ -#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 4 Int Mask */ -#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08) - - -/* - *************************************************************************** - * Memory controller registers * - *************************************************************************** - */ -#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) -#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00) -#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04) -#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08) - -/* - *************************************************************************** - * PCI controller registers * - *************************************************************************** - */ -#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) -#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800) -#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c) - -/* - ######################################################################## - # Register content & macro definitions # - ######################################################################## - */ - -/* - *************************************************************************** - * DEV_ID defines * - *************************************************************************** - */ -#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ -#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ -#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ -#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ -#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ - -#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ -#define MSP5000_ID (0x50 << 8) -#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ -#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ -#define MSP4200_ID (0x42 << 8) -#define MSP4000_ID (0x40 << 8) -#define MSP2XXX_ID (0x20 << 8) -#define MSPZEUS_ID (0x10 << 8) - -#define MSP2004_SUB_ID (0x0 << 16) -#define MSP2005_SUB_ID (0x1 << 16) -#define MSP2006_SUB_ID (0x1 << 16) -#define MSP2007_SUB_ID (0x2 << 16) -#define MSP2010_SUB_ID (0x3 << 16) -#define MSP2015_SUB_ID (0x4 << 16) -#define MSP2020_SUB_ID (0x5 << 16) -#define MSP2100_SUB_ID (0x6 << 16) - -/* - *************************************************************************** - * RESET defines * - *************************************************************************** - */ -#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ -#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ -#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ -#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ -/* reserved */ -#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ -#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ -#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ -#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ -#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ -#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ -#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ -#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ -#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ - -/* - *************************************************************************** - * UART defines * - *************************************************************************** - */ -#define MSP_BASE_BAUD 25000000 -#define MSP_UART_REG_LEN 0x20 - -/* - *************************************************************************** - * ELB defines * - *************************************************************************** - */ -#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ -#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ - -/* - *************************************************************************** - * CIC defines * - *************************************************************************** - */ - -/* CIC_EXT_CFG_REG */ -#define EXT_INT_POL(eirq) (1 << (eirq + 8)) -#define EXT_INT_EDGE(eirq) (1 << eirq) - -#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq)) -#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq)) -#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq)) -#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq)) -#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI -#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO - -#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \ - ((reg & EXT_INT_EDGE(eirq)) == 0) -#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq)) -#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq)) -#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \ - ((reg & EXT_INT_POL(eirq)) == 0) -#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI -#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO - -/* - *************************************************************************** - * Memory Controller defines * - *************************************************************************** - */ - -/* Indirect memory controller registers */ -#define DDRC_CFG(n) (n) -#define DDRC_DEBUG(n) (0x04 + n) -#define DDRC_CTL(n) (0x40 + n) - -/* Macro to perform DDRC indirect write */ -#define DDRC_INDIRECT_WRITE(reg, mask, value) \ -({ \ - *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \ - *MEM_SS_DATA = (value); \ - *MEM_SS_WRITE = 1; \ -}) - -/* - *************************************************************************** - * SPI/MPI Mode * - *************************************************************************** - */ -#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ -#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ -#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ -#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ - -/* - *************************************************************************** - * SPI/MPI Control Register * - *************************************************************************** - */ -#define SPI_MPI_RX_START 0x00000004 /* Start receive command */ -#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */ -#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */ - -#endif /* !_ASM_MSP_REGS_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h deleted file mode 100644 index 9a763eb5e5f5..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h +++ /dev/null @@ -1,129 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the MSP interrupt controller. - * - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _MSP_SLP_INT_H -#define _MSP_SLP_INT_H - -/* - * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts - * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level - * comprises the Peripherial block, the PCI block, the PCI MSI block and - * the SLP. The PCI interrupts and the SLP errors are handled by the - * relevant subsystems so the core interrupt code needs only concern - * itself with the Peripheral block. These are assigned interrupts in - * the range 40-71. - */ - -/* - * IRQs directly connected to CPU - */ -#define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ -#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ -#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ -#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ - -/* - * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) - * These defines should be tied to the register definition for the SLM - * interrupt routine. For now, just use hard-coded values. - */ -#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) -#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) - /* External interrupt 0 */ -#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) - /* External interrupt 1 */ -#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) - /* External interrupt 2 */ -#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) - /* External interrupt 3 */ -/* Reserved 4-7 */ - -/* - ************************************************************************* - * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * - * Some MSP produces have this interrupt labelled as Voice and some are * - * SEC mbox ... * - ************************************************************************* - */ -#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) - /* Cascaded IRQ for Voice Engine*/ -#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) - /* TDM interrupt */ -#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ -#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ -#define MSP_INT_SEC (MSP_SLP_INTBASE + 12) - /* IRQ for security engine */ -#define MSP_INT_PER (MSP_SLP_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) - /* Cascaded MIPS timer */ -#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) - /* Block Copy */ -#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) - /* UART 0 */ -#define MSP_INT_PCI (MSP_SLP_INTBASE + 20) - /* PCI subsystem */ -#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) - /* PCI doorbell */ -#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) - /* PCI Message Signal */ -#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) - /* PCI Block Copy 0 */ -#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) - /* PCI Block Copy 1 */ -#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) - /* SLP error condition */ -#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) - /* IRQ for MAC2 */ -/* Reserved 26-31 */ - -/* - * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) - */ -#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) -/* Reserved 0-1 */ -#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ -#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ -#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) - /* Peripheral timer block out 0 */ -#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) - /* Peripheral timer block out 1 */ -/* Reserved 9 */ -#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ -#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ -#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ -#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ - -#endif /* !_MSP_SLP_INT_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h deleted file mode 100644 index 3cc3edb336b6..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h +++ /dev/null @@ -1,124 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/****************************************************************** - * Copyright (c) 2000-2007 PMC-Sierra INC. - * - * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS - * SOFTWARE. - */ -#ifndef MSP_USB_H_ -#define MSP_USB_H_ - -#define NUM_USB_DEVS 1 - -/* Register spaces for USB host 0 */ -#define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0) -#define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17) -#define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000) -#define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f) -#define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100) -#define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF) - -/* Register spaces for USB host 1 */ -#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0) -#define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17) -#define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000) -#define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f) -#define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100) -#define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff) - -/* USB Identification registers */ -struct msp_usbid_regs { - u32 id; /* 0x0: Identification register */ - u32 hwgen; /* 0x4: General HW params */ - u32 hwhost; /* 0x8: Host HW params */ - u32 hwdev; /* 0xc: Device HW params */ - u32 hwtxbuf; /* 0x10: Tx buffer HW params */ - u32 hwrxbuf; /* 0x14: Rx buffer HW params */ - u32 reserved[26]; - u32 timer0_load; /* 0x80: General-purpose timer 0 load*/ - u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */ - u32 timer1_load; /* 0x88: General-purpose timer 1 load*/ - u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */ -}; - -/* MSBus to AMBA registers */ -struct msp_mab_regs { - u32 isr; /* 0x0: Interrupt status */ - u32 imr; /* 0x4: Interrupt mask */ - u32 thcr0; /* 0x8: Transaction header capture 0 */ - u32 thcr1; /* 0xc: Transaction header capture 1 */ - u32 int_stat; /* 0x10: Interrupt status summary */ - u32 phy_cfg; /* 0x14: USB phy config */ -}; - -/* EHCI registers */ -struct msp_usbhs_regs { - u32 hciver; /* 0x0: Version and offset to operational regs */ - u32 hcsparams; /* 0x4: Host control structural parameters */ - u32 hccparams; /* 0x8: Host control capability parameters */ - u32 reserved0[5]; - u32 dciver; /* 0x20: Device interface version */ - u32 dccparams; /* 0x24: Device control capability parameters */ - u32 reserved1[6]; - u32 cmd; /* 0x40: USB command */ - u32 sts; /* 0x44: USB status */ - u32 int_ena; /* 0x48: USB interrupt enable */ - u32 frindex; /* 0x4c: Frame index */ - u32 reserved3; - union { - struct { - u32 flb_addr; /* 0x54: Frame list base address */ - u32 next_async_addr; /* 0x58: next asynchronous addr */ - u32 ttctrl; /* 0x5c: embedded transaction translator - async buffer status */ - u32 burst_size; /* 0x60: Controller burst size */ - u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */ - u32 reserved0[4]; - u32 endpt_nak; /* 0x78: Endpoint NAK */ - u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */ - u32 cfg_flag; /* 0x80: Config flag */ - u32 port_sc1; /* 0x84: Port status & control 1 */ - u32 reserved1[7]; - u32 otgsc; /* 0xa4: OTG status & control */ - u32 mode; /* 0xa8: USB controller mode */ - } host; - - struct { - u32 dev_addr; /* 0x54: Device address */ - u32 endpt_list_addr; /* 0x58: Endpoint list address */ - u32 reserved0[7]; - u32 endpt_nak; /* 0x74 */ - u32 endpt_nak_ctrl; /* 0x78 */ - u32 cfg_flag; /* 0x80 */ - u32 port_sc1; /* 0x84: Port status & control 1 */ - u32 reserved[7]; - u32 otgsc; /* 0xa4: OTG status & control */ - u32 mode; /* 0xa8: USB controller mode */ - u32 endpt_setup_stat; /* 0xac */ - u32 endpt_prime; /* 0xb0 */ - u32 endpt_flush; /* 0xb4 */ - u32 endpt_stat; /* 0xb8 */ - u32 endpt_complete; /* 0xbc */ - u32 endpt_ctrl0; /* 0xc0 */ - u32 endpt_ctrl1; /* 0xc4 */ - u32 endpt_ctrl2; /* 0xc8 */ - u32 endpt_ctrl3; /* 0xcc */ - } device; - } u; -}; -/* - * Container for the more-generic platform_device. - * This exists mainly as a way to map the non-standard register - * spaces and make them accessible to the USB ISR. - */ -struct mspusb_device { - struct msp_mab_regs __iomem *mab_regs; - struct msp_usbid_regs __iomem *usbid_regs; - struct msp_usbhs_regs __iomem *usbhs_regs; - struct platform_device dev; -}; - -#define to_mspusb_device(x) container_of((x), struct mspusb_device, dev) -#define TO_HOST_ID(x) ((x) & 0x3) -#endif /*MSP_USB_H_*/ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h deleted file mode 100644 index 31c546f58bb5..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H -#define __ASM_MIPS_PMC_SIERRA_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_FPGA) -#define MIPS34K_MISSED_ITLB_WAR 1 -#else -#define MIPS34K_MISSED_ITLB_WAR 0 -#endif - -#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c6142b289086..aeac09090fb4 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -35,9 +35,6 @@ obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o -obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o -obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o -obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_SGI_IP27) += pci-ip27.o obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c deleted file mode 100644 index 4ad2ef02087b..000000000000 --- a/arch/mips/pci/fixup-pmcmsp.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * PMC-Sierra MSP board specific pci fixups. - * - * Copyright 2001 MontaVista Software Inc. - * Copyright 2005-2007 PMC-Sierra, Inc - * - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifdef CONFIG_PCI - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/byteorder.h> - -#include <msp_pci.h> -#include <msp_cic_int.h> - -/* PCI interrupt pins */ -#define IRQ4 MSP_INT_EXT4 -#define IRQ5 MSP_INT_EXT5 -#define IRQ6 MSP_INT_EXT6 - -#if defined(CONFIG_PMC_MSP7120_GW) -/* Garibaldi Board IRQ wiring to PCI slots */ -static char irq_tab[][5] = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ - {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ - {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ - {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */ - {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */ -}; - -#elif defined(CONFIG_PMC_MSP7120_EVAL) - -/* MSP7120 Eval Board IRQ wiring to PCI slots */ -static char irq_tab[][5] = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */ - {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */ - {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */ - {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ - {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ -}; - -#else - -/* Unknown board -- don't assign any IRQs */ -static char irq_tab[][5] = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ - {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ - {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ - {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ - {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ -}; -#endif - -/***************************************************************************** - * - * FUNCTION: pcibios_plat_dev_init - * _________________________________________________________________________ - * - * DESCRIPTION: Perform platform specific device initialization at - * pci_enable_device() time. - * None are needed for the MSP7120 PCI Controller. - * - * INPUTS: dev - structure describing the PCI device - * - * OUTPUTS: none - * - * RETURNS: PCIBIOS_SUCCESSFUL - * - ****************************************************************************/ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: pcibios_map_irq - * _________________________________________________________________________ - * - * DESCRIPTION: Perform board supplied PCI IRQ mapping routine. - * - * INPUTS: dev - unused - * slot - PCI slot. Identified by which bit of the AD[] bus - * drives the IDSEL line. AD[10] is 0, AD[31] is - * slot 21. - * pin - numbered using the scheme of the PCI_INTERRUPT_PIN - * field of the config header. - * - * OUTPUTS: none - * - * RETURNS: IRQ number - * - ****************************************************************************/ -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ -#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL) - printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n"); -#endif - printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n", - irq_tab[slot][pin], slot, pin); - - return irq_tab[slot][pin]; -} - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c deleted file mode 100644 index ad5dd711c575..000000000000 --- a/arch/mips/pci/ops-pmcmsp.c +++ /dev/null @@ -1,944 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * PMC-Sierra MSP board specific pci_ops - * - * Copyright 2001 MontaVista Software Inc. - * Copyright 2005-2007 PMC-Sierra, Inc - * - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * Much of the code is derived from the original DDB5074 port by - * Geert Uytterhoeven <geert@linux-m68k.org> - */ - -#define PCI_COUNTERS 1 - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/interrupt.h> - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/byteorder.h> -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) -#include <asm/mipsmtregs.h> -#endif - -#include <msp_prom.h> -#include <msp_cic_int.h> -#include <msp_pci.h> -#include <msp_regs.h> -#include <msp_regops.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) -static char proc_init; -extern struct proc_dir_entry *proc_bus_pci_dir; -unsigned int pci_int_count[32]; - -static void pci_proc_init(void); - -/***************************************************************************** - * - * FUNCTION: show_msp_pci_counts - * _________________________________________________________________________ - * - * DESCRIPTION: Prints the count of how many times each PCI - * interrupt has asserted. Can be invoked by the - * /proc filesystem. - * - * INPUTS: m - synthetic file construction data - * v - iterator - * - * RETURNS: 0 or error - * - ****************************************************************************/ -static int show_msp_pci_counts(struct seq_file *m, void *v) -{ - int i; - unsigned int intcount, total = 0; - - for (i = 0; i < 32; ++i) { - intcount = pci_int_count[i]; - if (intcount != 0) { - seq_printf(m, "[%d] = %u\n", i, intcount); - total += intcount; - } - } - - seq_printf(m, "total = %u\n", total); - return 0; -} - -/***************************************************************************** - * - * FUNCTION: gen_pci_cfg_wr_show - * _________________________________________________________________________ - * - * DESCRIPTION: Generates a configuration write cycle for debug purposes. - * The IDSEL line asserted and location and data written are - * immaterial. Just want to be able to prove that a - * configuration write can be correctly generated on the - * PCI bus. Intent is that this function by invocable from - * the /proc filesystem. - * - * INPUTS: m - synthetic file construction data - * v - iterator - * - * RETURNS: 0 or error - * - ****************************************************************************/ -static int gen_pci_cfg_wr_show(struct seq_file *m, void *v) -{ - unsigned char where = 0; /* Write to static Device/Vendor ID */ - unsigned char bus_num = 0; /* Bus 0 */ - unsigned char dev_fn = 0xF; /* Arbitrary device number */ - u32 wr_data = 0xFF00AA00; /* Arbitrary data */ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - unsigned long value; - int intr; - - seq_puts(m, "PMC MSP PCI: Beginning\n"); - - if (proc_init == 0) { - pci_proc_init(); - proc_init = ~0; - } - - seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n"); - - /* - * Generate PCI Configuration Write Cycle - */ - - /* Clear cause register bits */ - preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); - - /* Setup address that is to appear on PCI bus */ - preg->config_addr = BPCI_CFGADDR_ENABLE | - (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | - (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | - (where & 0xFC); - - value = cpu_to_le32(wr_data); - - /* Launch the PCI configuration write cycle */ - *PCI_CONFIG_SPACE_REG = value; - - /* - * Check if the PCI configuration cycle (rd or wr) succeeded, by - * checking the status bits for errors like master or target abort. - */ - intr = preg->if_status; - - seq_puts(m, "PMC MSP PCI: After Cfg Wr\n"); - return 0; -} - -/***************************************************************************** - * - * FUNCTION: pci_proc_init - * _________________________________________________________________________ - * - * DESCRIPTION: Create entries in the /proc filesystem for debug access. - * - * INPUTS: none - * - * OUTPUTS: none - * - * RETURNS: none - * - ****************************************************************************/ -static void pci_proc_init(void) -{ - proc_create_single("pmc_msp_pci_rd_cnt", 0, NULL, show_msp_pci_counts); - proc_create_single("pmc_msp_pci_cfg_wr", 0, NULL, gen_pci_cfg_wr_show); -} -#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ - -/***************************************************************************** - * - * STRUCT: pci_io_resource - * _________________________________________________________________________ - * - * DESCRIPTION: Defines the address range that pciauto() will use to - * assign to the I/O BARs of PCI devices. - * - * Use the start and end addresses of the MSP7120 PCI Host - * Controller I/O space, in the form that they appear on the - * PCI bus AFTER MSP7120 has performed address translation. - * - * For I/O accesses, MSP7120 ignores OATRAN and maps I/O - * accesses into the bottom 0xFFF region of address space, - * so that is the range to put into the pci_io_resource - * struct. - * - * In MSP4200, the start address was 0x04 instead of the - * expected 0x00. Will just assume there was a good reason - * for this! - * - * NOTES: Linux, by default, will assign I/O space to the lowest - * region of address space. Since MSP7120 and Linux, - * by default, have no offset in between how they map, the - * io_offset element of pci_controller struct should be set - * to zero. - * ELEMENTS: - * name - String used for a meaningful name. - * - * start - Start address of MSP7120's I/O space, as MSP7120 presents - * the address on the PCI bus. - * - * end - End address of MSP7120's I/O space, as MSP7120 presents - * the address on the PCI bus. - * - * flags - Attributes indicating the type of resource. In this case, - * indicate I/O space. - * - ****************************************************************************/ -static struct resource pci_io_resource = { - .name = "pci IO space", - .start = 0x04, - .end = 0x0FFF, - .flags = IORESOURCE_IO /* I/O space */ -}; - -/***************************************************************************** - * - * STRUCT: pci_mem_resource - * _________________________________________________________________________ - * - * DESCRIPTION: Defines the address range that pciauto() will use to - * assign to the memory BARs of PCI devices. - * - * The .start and .end values are dependent upon how address - * translation is performed by the OATRAN regiser. - * - * The values to use for .start and .end are the values - * in the form they appear on the PCI bus AFTER MSP7120 has - * performed OATRAN address translation. - * - * ELEMENTS: - * name - String used for a meaningful name. - * - * start - Start address of MSP7120's memory space, as MSP7120 presents - * the address on the PCI bus. - * - * end - End address of MSP7120's memory space, as MSP7120 presents - * the address on the PCI bus. - * - * flags - Attributes indicating the type of resource. In this case, - * indicate memory space. - * - ****************************************************************************/ -static struct resource pci_mem_resource = { - .name = "pci memory space", - .start = MSP_PCI_SPACE_BASE, - .end = MSP_PCI_SPACE_END, - .flags = IORESOURCE_MEM /* memory space */ -}; - -/***************************************************************************** - * - * FUNCTION: bpci_interrupt - * _________________________________________________________________________ - * - * DESCRIPTION: PCI status interrupt handler. Updates the count of how - * many times each status bit has been set, then clears - * the status bits. If the appropriate macros are defined, - * these counts can be viewed via the /proc filesystem. - * - * INPUTS: irq - unused - * dev_id - unused - * pt_regs - unused - * - * OUTPUTS: none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * - ****************************************************************************/ -static irqreturn_t bpci_interrupt(int irq, void *dev_id) -{ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - unsigned int stat = preg->if_status; - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) - int i; - for (i = 0; i < 32; ++i) { - if ((1 << i) & stat) - ++pci_int_count[i]; - } -#endif /* PROC_FS && PCI_COUNTERS */ - - /* printk("PCI ISR: Status=%08X\n", stat); */ - - /* write to clear all asserted interrupts */ - preg->if_status = stat; - - return IRQ_HANDLED; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_config_access - * _________________________________________________________________________ - * - * DESCRIPTION: Performs a PCI configuration access (rd or wr), then - * checks that the access succeeded by querying MSP7120's - * PCI status bits. - * - * INPUTS: - * access_type - kind of PCI configuration cycle to perform - * (read or write). Legal values are - * PCI_ACCESS_WRITE and PCI_ACCESS_READ. - * - * bus - pointer to the bus number of the device to - * be targeted for the configuration cycle. - * The only element of the pci_bus structure - * used is bus->number. This argument determines - * if the configuration access will be Type 0 or - * Type 1. Since MSP7120 assumes itself to be the - * PCI Host, any non-zero bus->number generates - * a Type 1 access. - * - * devfn - this is an 8-bit field. The lower three bits - * specify the function number of the device to - * be targeted for the configuration cycle, with - * all three-bit combinations being legal. The - * upper five bits specify the device number, - * with legal values being 10 to 31. - * - * where - address within the Configuration Header - * space to access. - * - * data - for write accesses, contains the data to - * write. - * - * OUTPUTS: - * data - for read accesses, contains the value read. - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - access failure - * - ****************************************************************************/ -int msp_pcibios_config_access(unsigned char access_type, - struct pci_bus *bus, - unsigned int devfn, - unsigned char where, - u32 *data) -{ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - unsigned char bus_num = bus->number; - unsigned char dev_fn = (unsigned char)devfn; - unsigned long intr; - unsigned long value; - static char pciirqflag; - int ret; -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - unsigned int vpe_status; -#endif - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) - if (proc_init == 0) { - pci_proc_init(); - proc_init = ~0; - } -#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ - - /* - * Just the first time this function invokes, allocate - * an interrupt line for PCI host status interrupts. The - * allocation assigns an interrupt handler to the interrupt. - */ - if (pciirqflag == 0) { - ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ - bpci_interrupt, - IRQF_SHARED, - "PMC MSP PCI Host", - preg); - if (ret != 0) - return ret; - pciirqflag = ~0; - } - -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - vpe_status = dvpe(); -#endif - - /* - * Clear PCI cause register bits. - * - * In Polo, the PCI Host had a dedicated DMA called the - * Block Copy (not to be confused with the general purpose Block - * Copy Engine block). There appear to have been special interrupts - * for this Block Copy, called Block Copy 0 Fault (BC0F) and - * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this - * dedicated Block Copy block, so these two interrupts are now - * marked reserved. In case the Block Copy is resurrected in a - * future design, maintain the code that treats these two interrupts - * specially. - * - * Write to clear all interrupts in the PCI status register, aside - * from BC0F and BC1F. - */ - preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); - - /* Setup address that is to appear on PCI bus */ - preg->config_addr = BPCI_CFGADDR_ENABLE | - (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | - (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | - (where & 0xFC); - - /* IF access is a PCI configuration write */ - if (access_type == PCI_ACCESS_WRITE) { - value = cpu_to_le32(*data); - *PCI_CONFIG_SPACE_REG = value; - } else { - /* ELSE access is a PCI configuration read */ - value = le32_to_cpu(*PCI_CONFIG_SPACE_REG); - *data = value; - } - - /* - * Check if the PCI configuration cycle (rd or wr) succeeded, by - * checking the status bits for errors like master or target abort. - */ - intr = preg->if_status; - - /* Clear config access */ - preg->config_addr = 0; - - /* IF error occurred */ - if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) { - /* Clear status bits */ - preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); - -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - evpe(vpe_status); -#endif - - return -1; - } - -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - evpe(vpe_status); -#endif - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config_byte - * _________________________________________________________________________ - * - * DESCRIPTION: Read a byte from PCI configuration address spac - * Since the hardware can't address 8 bit chunks - * directly, read a 32-bit chunk, then mask off extraneous - * bits. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. - * - * OUTPUTS val - read data - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - read access failure - * - ****************************************************************************/ -static int -msp_pcibios_read_config_byte(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 *val) -{ - u32 data = 0; - - /* - * If the config access did not complete normally (e.g., underwent - * master abort) do the PCI compliant thing, which is to supply an - * all ones value. - */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) { - *val = 0xFFFFFFFF; - return -1; - } - - *val = (data >> ((where & 3) << 3)) & 0x0ff; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config_word - * _________________________________________________________________________ - * - * DESCRIPTION: Read a word (16 bits) from PCI configuration address space. - * Since the hardware can't address 16 bit chunks - * directly, read a 32-bit chunk, then mask off extraneous - * bits. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. - * - * OUTPUTS val - read data - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - read access failure - * - ****************************************************************************/ -static int -msp_pcibios_read_config_word(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 *val) -{ - u32 data = 0; - - /* if (where & 1) */ /* Commented out non-compliant code. - * Should allow word access to configuration - * registers, with only exception being when - * the word access would wrap around into - * the next dword. - */ - if ((where & 3) == 3) { - *val = 0xFFFFFFFF; - return PCIBIOS_BAD_REGISTER_NUMBER; - } - - /* - * If the config access did not complete normally (e.g., underwent - * master abort) do the PCI compliant thing, which is to supply an - * all ones value. - */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) { - *val = 0xFFFFFFFF; - return -1; - } - - *val = (data >> ((where & 3) << 3)) & 0x0ffff; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config_dword - * _________________________________________________________________________ - * - * DESCRIPTION: Read a double word (32 bits) from PCI configuration - * address space. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. - * - * OUTPUTS val - read data - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - read access failure - * - ****************************************************************************/ -static int -msp_pcibios_read_config_dword(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 *val) -{ - u32 data = 0; - - /* Address must be dword aligned. */ - if (where & 3) { - *val = 0xFFFFFFFF; - return PCIBIOS_BAD_REGISTER_NUMBER; - } - - /* - * If the config access did not complete normally (e.g., underwent - * master abort) do the PCI compliant thing, which is to supply an - * all ones value. - */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) { - *val = 0xFFFFFFFF; - return -1; - } - - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config_byte - * _________________________________________________________________________ - * - * DESCRIPTION: Write a byte to PCI configuration address space. - * Since the hardware can't address 8 bit chunks - * directly, a read-modify-write is performed. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write - * - * OUTPUTS none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - write access failure - * - ****************************************************************************/ -static int -msp_pcibios_write_config_byte(struct pci_bus *bus, - unsigned int devfn, - int where, - u8 val) -{ - u32 data = 0; - - /* read config space */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) - return -1; - - /* modify the byte within the dword */ - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - /* write back the full dword */ - if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, - where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config_word - * _________________________________________________________________________ - * - * DESCRIPTION: Write a word (16-bits) to PCI configuration address space. - * Since the hardware can't address 16 bit chunks - * directly, a read-modify-write is performed. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write - * - * OUTPUTS none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - write access failure - * - ****************************************************************************/ -static int -msp_pcibios_write_config_word(struct pci_bus *bus, - unsigned int devfn, - int where, - u16 val) -{ - u32 data = 0; - - /* Fixed non-compliance: if (where & 1) */ - if ((where & 3) == 3) - return PCIBIOS_BAD_REGISTER_NUMBER; - - /* read config space */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) - return -1; - - /* modify the word within the dword */ - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - /* write back the full dword */ - if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, - where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config_dword - * _________________________________________________________________________ - * - * DESCRIPTION: Write a double word (32-bits) to PCI configuration address - * space. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write - * - * OUTPUTS none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - write access failure - * - ****************************************************************************/ -static int -msp_pcibios_write_config_dword(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 val) -{ - /* check that address is dword aligned */ - if (where & 3) - return PCIBIOS_BAD_REGISTER_NUMBER; - - /* perform write */ - if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, - where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config - * _________________________________________________________________________ - * - * DESCRIPTION: Interface the PCI configuration read request with - * the appropriate function, based on how many bytes - * the read request is. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * size - in units of bytes, should be 1, 2, or 4. - * - * OUTPUTS val - value read, with any extraneous bytes masked - * to zero. - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - failure - * - ****************************************************************************/ -int -msp_pcibios_read_config(struct pci_bus *bus, - unsigned int devfn, - int where, - int size, - u32 *val) -{ - if (size == 1) { - if (msp_pcibios_read_config_byte(bus, devfn, where, val)) { - return -1; - } - } else if (size == 2) { - if (msp_pcibios_read_config_word(bus, devfn, where, val)) { - return -1; - } - } else if (size == 4) { - if (msp_pcibios_read_config_dword(bus, devfn, where, val)) { - return -1; - } - } else { - *val = 0xFFFFFFFF; - return -1; - } - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config - * _________________________________________________________________________ - * - * DESCRIPTION: Interface the PCI configuration write request with - * the appropriate function, based on how many bytes - * the read request is. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * size - in units of bytes, should be 1, 2, or 4. - * val - value to write - * - * OUTPUTS: none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - failure - * - ****************************************************************************/ -int -msp_pcibios_write_config(struct pci_bus *bus, - unsigned int devfn, - int where, - int size, - u32 val) -{ - if (size == 1) { - if (msp_pcibios_write_config_byte(bus, devfn, - where, (u8)(0xFF & val))) { - return -1; - } - } else if (size == 2) { - if (msp_pcibios_write_config_word(bus, devfn, - where, (u16)(0xFFFF & val))) { - return -1; - } - } else if (size == 4) { - if (msp_pcibios_write_config_dword(bus, devfn, where, val)) { - return -1; - } - } else { - return -1; - } - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * STRUCTURE: msp_pci_ops - * _________________________________________________________________________ - * - * DESCRIPTION: structure to abstract the hardware specific PCI - * configuration accesses. - * - * ELEMENTS: - * read - function for Linux to generate PCI Configuration reads. - * write - function for Linux to generate PCI Configuration writes. - * - ****************************************************************************/ -struct pci_ops msp_pci_ops = { - .read = msp_pcibios_read_config, - .write = msp_pcibios_write_config -}; - -/***************************************************************************** - * - * STRUCTURE: msp_pci_controller - * _________________________________________________________________________ - * - * Describes the attributes of the MSP7120 PCI Host Controller - * - * ELEMENTS: - * pci_ops - abstracts the hardware specific PCI configuration - * accesses. - * - * mem_resource - address range pciauto() uses to assign to PCI device - * memory BARs. - * - * mem_offset - offset between how MSP7120 outbound PCI memory - * transaction addresses appear on the PCI bus and how Linux - * wants to configure memory BARs of the PCI devices. - * MSP7120 does nothing funky, so just set to zero. - * - * io_resource - address range pciauto() uses to assign to PCI device - * I/O BARs. - * - * io_offset - offset between how MSP7120 outbound PCI I/O - * transaction addresses appear on the PCI bus and how - * Linux defaults to configure I/O BARs of the PCI devices. - * MSP7120 maps outbound I/O accesses into the bottom - * bottom 4K of PCI address space (and ignores OATRAN). - * Since the Linux default is to configure I/O BARs to the - * bottom 4K, no special offset is needed. Just set to zero. - * - ****************************************************************************/ -static struct pci_controller msp_pci_controller = { - .pci_ops = &msp_pci_ops, - .mem_resource = &pci_mem_resource, - .mem_offset = 0, - .io_map_base = MSP_PCI_IOSPACE_BASE, - .io_resource = &pci_io_resource, - .io_offset = 0 -}; - -/***************************************************************************** - * - * FUNCTION: msp_pci_init - * _________________________________________________________________________ - * - * DESCRIPTION: Initialize the PCI Host Controller and register it with - * Linux so Linux can seize control of the PCI bus. - * - ****************************************************************************/ -void __init msp_pci_init(void) -{ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - u32 id; - - /* Extract Device ID */ - id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12; - - /* Check if JTAG ID identifies MSP7120 */ - if (!MSP_HAS_PCI(id)) { - printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id); - goto no_pci; - } - - /* - * Enable flushing of the PCI-SDRAM queue upon a read - * of the SDRAM's Memory Configuration Register. - */ - *(unsigned long *)QFLUSH_REG_1 = 3; - - /* Configure PCI Host Controller. */ - preg->if_status = ~0; /* Clear cause register bits */ - preg->config_addr = 0; /* Clear config access */ - preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */ - preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */ - - /* configure so inb(), outb(), and family are functional */ - set_io_port_base(MSP_PCI_IOSPACE_BASE); - - /* Tell Linux the details of the MSP7120 PCI Host Controller */ - register_pci_controller(&msp_pci_controller); - - return; - -no_pci: - /* Disable PCI channel */ - printk(KERN_WARNING "PCI: no host PCI bus detected\n"); -} diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig deleted file mode 100644 index b185b7620c97..000000000000 --- a/arch/mips/pmcs-msp71xx/Kconfig +++ /dev/null @@ -1,50 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -choice - prompt "PMC-Sierra MSP SOC type" - depends on PMC_MSP - -config PMC_MSP4200_EVAL - bool "PMC-Sierra MSP4200 Eval Board" - select IRQ_MSP_SLP - select HAVE_PCI - select MIPS_L1_CACHE_SHIFT_4 - -config PMC_MSP4200_GW - bool "PMC-Sierra MSP4200 VoIP Gateway" - select IRQ_MSP_SLP - select HAVE_PCI - -config PMC_MSP7120_EVAL - bool "PMC-Sierra MSP7120 Eval Board" - select SYS_SUPPORTS_MULTITHREADING - select IRQ_MSP_CIC - select HAVE_PCI - -config PMC_MSP7120_GW - bool "PMC-Sierra MSP7120 Residential Gateway" - select SYS_SUPPORTS_MULTITHREADING - select IRQ_MSP_CIC - select HAVE_PCI - select MSP_HAS_USB - select MSP_ETH - -config PMC_MSP7120_FPGA - bool "PMC-Sierra MSP7120 FPGA" - select SYS_SUPPORTS_MULTITHREADING - select IRQ_MSP_CIC - select HAVE_PCI - -endchoice - -config MSP_HAS_USB - bool - depends on PMC_MSP - -config MSP_ETH - bool - select MSP_HAS_MAC - depends on PMC_MSP - -config MSP_HAS_MAC - bool - depends on PMC_MSP diff --git a/arch/mips/pmcs-msp71xx/Makefile b/arch/mips/pmcs-msp71xx/Makefile deleted file mode 100644 index c040bd6ed62d..000000000000 --- a/arch/mips/pmcs-msp71xx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the PMC-Sierra MSP SOCs -# -obj-y += msp_prom.o msp_setup.o msp_irq.o \ - msp_time.o msp_serial.o msp_elb.o -obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o -obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o -obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o -obj-$(CONFIG_PCI) += msp_pci.o -obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o -obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o -obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o diff --git a/arch/mips/pmcs-msp71xx/Platform b/arch/mips/pmcs-msp71xx/Platform deleted file mode 100644 index 7af0734a5007..000000000000 --- a/arch/mips/pmcs-msp71xx/Platform +++ /dev/null @@ -1,7 +0,0 @@ -# -# PMC-Sierra MSP SOCs -# -platform-$(CONFIG_PMC_MSP) += pmcs-msp71xx/ -cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \ - -mno-branch-likely -load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 diff --git a/arch/mips/pmcs-msp71xx/msp_elb.c b/arch/mips/pmcs-msp71xx/msp_elb.c deleted file mode 100644 index 3e9641007216..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_elb.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Sets up the proper Chip Select configuration registers. It is assumed that - * PMON sets up the ADDR and MASK registers properly. - * - * Copyright 2005-2006 PMC-Sierra, Inc. - * Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <msp_regs.h> - -static int __init msp_elb_setup(void) -{ -#if defined(CONFIG_PMC_MSP7120_GW) \ - || defined(CONFIG_PMC_MSP7120_EVAL) - /* - * Force all CNFG to be identical and equal to CS0, - * according to OPS doc - */ - *CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG; -#endif - return 0; -} - -subsys_initcall(msp_elb_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c deleted file mode 100644 index 15679b427f44..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_eth.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * The setup file for ethernet related hardware on PMC-Sierra MSP processors. - * - * Copyright 2010 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <msp_regs.h> -#include <msp_int.h> -#include <msp_gpio_macros.h> - - -#define MSP_ETHERNET_GPIO0 14 -#define MSP_ETHERNET_GPIO1 15 -#define MSP_ETHERNET_GPIO2 16 - -#define MSP_ETH_ID "pmc_mspeth" -#define MSP_ETH_SIZE 0xE0 -static struct resource msp_eth0_resources[] = { - [0] = { - .start = MSP_MAC0_BASE, - .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_MAC0, - .end = MSP_INT_MAC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msp_eth1_resources[] = { - [0] = { - .start = MSP_MAC1_BASE, - .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_MAC1, - .end = MSP_INT_MAC1, - .flags = IORESOURCE_IRQ, - }, -}; - - - -static struct platform_device mspeth_device[] = { - [0] = { - .name = MSP_ETH_ID, - .id = 0, - .num_resources = ARRAY_SIZE(msp_eth0_resources), - .resource = msp_eth0_resources, - }, - [1] = { - .name = MSP_ETH_ID, - .id = 1, - .num_resources = ARRAY_SIZE(msp_eth1_resources), - .resource = msp_eth1_resources, - }, - -}; -#define msp_eth_devs mspeth_device - -int __init msp_eth_setup(void) -{ - int i, ret = 0; - - /* Configure the GPIO and take the ethernet PHY out of reset */ - msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0); - msp_gpio_pin_hi(MSP_ETHERNET_GPIO0); - - for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) { - ret = platform_device_register(&msp_eth_devs[i]); - printk(KERN_INFO "device: %d, return value = %d\n", i, ret); - if (ret) { - platform_device_unregister(&msp_eth_devs[i]); - break; - } - } - - if (ret) - printk(KERN_WARNING "Could not initialize " - "MSPETH device structures.\n"); - - return ret; -} -subsys_initcall(msp_eth_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_hwbutton.c b/arch/mips/pmcs-msp71xx/msp_hwbutton.c deleted file mode 100644 index bb57ed9ea2bd..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_hwbutton.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Sets up interrupt handlers for various hardware switches which are - * connected to interrupt lines. - * - * Copyright 2005-2207 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <msp_int.h> -#include <msp_regs.h> -#include <msp_regops.h> - -/* For hwbutton_interrupt->initial_state */ -#define HWBUTTON_HI 0x1 -#define HWBUTTON_LO 0x2 - -/* - * This struct describes a hardware button - */ -struct hwbutton_interrupt { - char *name; /* Name of button */ - int irq; /* Actual LINUX IRQ */ - int eirq; /* Extended IRQ number (0-7) */ - int initial_state; /* The "normal" state of the switch */ - void (*handle_hi)(void *); /* Handler: switch input has gone HI */ - void (*handle_lo)(void *); /* Handler: switch input has gone LO */ - void *data; /* Optional data to pass to handler */ -}; - -#ifdef CONFIG_PMC_MSP7120_GW -extern void msp_restart(char *); - -static void softreset_push(void *data) -{ - printk(KERN_WARNING "SOFTRESET switch was pushed\n"); - - /* - * In the future you could move this to the release handler, - * timing the difference between the 'push' and 'release', and only - * doing this ungraceful restart if the button has been down for - * a certain amount of time; otherwise doing a graceful restart. - */ - - msp_restart(NULL); -} - -static void softreset_release(void *data) -{ - printk(KERN_WARNING "SOFTRESET switch was released\n"); - - /* Do nothing */ -} - -static void standby_on(void *data) -{ - printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n"); - - /* TODO: Put board in standby mode */ -} - -static void standby_off(void *data) -{ - printk(KERN_WARNING - "STANDBY switch was set to OFF (not implemented)\n"); - - /* TODO: Take out of standby mode */ -} - -static struct hwbutton_interrupt softreset_sw = { - .name = "Softreset button", - .irq = MSP_INT_EXT0, - .eirq = 0, - .initial_state = HWBUTTON_HI, - .handle_hi = softreset_release, - .handle_lo = softreset_push, - .data = NULL, -}; - -static struct hwbutton_interrupt standby_sw = { - .name = "Standby switch", - .irq = MSP_INT_EXT1, - .eirq = 1, - .initial_state = HWBUTTON_HI, - .handle_hi = standby_off, - .handle_lo = standby_on, - .data = NULL, -}; -#endif /* CONFIG_PMC_MSP7120_GW */ - -static irqreturn_t hwbutton_handler(int irq, void *data) -{ - struct hwbutton_interrupt *hirq = data; - unsigned long cic_ext = *CIC_EXT_CFG_REG; - - if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) { - /* Interrupt: pin is now HI */ - CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq); - hirq->handle_hi(hirq->data); - } else { - /* Interrupt: pin is now LO */ - CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq); - hirq->handle_lo(hirq->data); - } - - /* - * Invert the POLARITY of this level interrupt to ack the interrupt - * Thus next state change will invoke the opposite message - */ - *CIC_EXT_CFG_REG = cic_ext; - - return IRQ_HANDLED; -} - -static int msp_hwbutton_register(struct hwbutton_interrupt *hirq) -{ - unsigned long cic_ext; - - if (hirq->handle_hi == NULL || hirq->handle_lo == NULL) - return -EINVAL; - - cic_ext = *CIC_EXT_CFG_REG; - CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq); - if (hirq->initial_state == HWBUTTON_HI) - CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq); - else - CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq); - *CIC_EXT_CFG_REG = cic_ext; - - return request_irq(hirq->irq, hwbutton_handler, 0, - hirq->name, hirq); -} - -static int __init msp_hwbutton_setup(void) -{ -#ifdef CONFIG_PMC_MSP7120_GW - msp_hwbutton_register(&softreset_sw); - msp_hwbutton_register(&standby_sw); -#endif - return 0; -} - -subsys_initcall(msp_hwbutton_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c deleted file mode 100644 index d525cc931d89..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * IRQ vector handles - * - * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/time.h> - -#include <asm/irq_cpu.h> -#include <asm/setup.h> - -#include <msp_int.h> - -/* SLP bases systems */ -extern void msp_slp_irq_init(void); -extern void msp_slp_irq_dispatch(void); - -/* CIC based systems */ -extern void msp_cic_irq_init(void); -extern void msp_cic_irq_dispatch(void); - -/* VSMP support init */ -extern void msp_vsmp_int_init(void); - -/* vectored interrupt implementation */ - -/* SW0/1 interrupts are used for SMP */ -static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); } -static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); } -static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); } -static inline void usb_int_dispatch(void) { do_IRQ(MSP_INT_USB); } -static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); } - -/* - * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts - * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level - * comprises the Peripherial block, the PCI block, the PCI MSI block and - * the SLP. The PCI interrupts and the SLP errors are handled by the - * relevant subsystems so the core interrupt code needs only concern - * itself with the Peripheral block. These are assigned interrupts in - * the range 40-71. - */ - -asmlinkage void plat_irq_dispatch(void) -{ - u32 pending; - - pending = read_c0_status() & read_c0_cause(); - - /* - * jump to the correct interrupt routine - * These are arranged in priority order and the timer - * comes first! - */ - -#ifdef CONFIG_IRQ_MSP_CIC /* break out the CIC stuff for now */ - if (pending & C_IRQ4) /* do the peripherals first, that's the timer */ - msp_cic_irq_dispatch(); - - else if (pending & C_IRQ0) - do_IRQ(MSP_INT_MAC0); - - else if (pending & C_IRQ1) - do_IRQ(MSP_INT_MAC1); - - else if (pending & C_IRQ2) - do_IRQ(MSP_INT_USB); - - else if (pending & C_IRQ3) - do_IRQ(MSP_INT_SAR); - - else if (pending & C_IRQ5) - do_IRQ(MSP_INT_SEC); - -#else - if (pending & C_IRQ5) - do_IRQ(MSP_INT_TIMER); - - else if (pending & C_IRQ0) - do_IRQ(MSP_INT_MAC0); - - else if (pending & C_IRQ1) - do_IRQ(MSP_INT_MAC1); - - else if (pending & C_IRQ3) - do_IRQ(MSP_INT_VE); - - else if (pending & C_IRQ4) - msp_slp_irq_dispatch(); -#endif - - else if (pending & C_SW0) /* do software after hardware */ - do_IRQ(MSP_INT_SW0); - - else if (pending & C_SW1) - do_IRQ(MSP_INT_SW1); -} - -void __init arch_init_irq(void) -{ - /* assume we'll be using vectored interrupt mode except in UP mode*/ -#ifdef CONFIG_MIPS_MT - BUG_ON(!cpu_has_vint); -#endif - /* initialize the 1st-level CPU based interrupt controller */ - mips_cpu_irq_init(); - -#ifdef CONFIG_IRQ_MSP_CIC - msp_cic_irq_init(); -#ifdef CONFIG_MIPS_MT - set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch); - set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch); - set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch); - set_vi_handler(MSP_INT_SAR, mac2_int_dispatch); - set_vi_handler(MSP_INT_USB, usb_int_dispatch); - set_vi_handler(MSP_INT_SEC, sec_int_dispatch); -#ifdef CONFIG_MIPS_MT_SMP - msp_vsmp_int_init(); -#endif /* CONFIG_MIPS_MT_SMP */ -#endif /* CONFIG_MIPS_MT */ - /* setup the cascaded interrupts */ - if (request_irq(MSP_INT_CIC, no_action, IRQF_NO_THREAD, - "MSP CIC cascade", NULL)) - pr_err("Failed to register MSP CIC cascade interrupt\n"); - if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD, - "MSP PER cascade", NULL)) - pr_err("Failed to register MSP PER cascade interrupt\n"); - -#else - /* - * Setup the 2nd-level SLP register based interrupt controller. - * VSMP support support is not enabled for SLP. - */ - msp_slp_irq_init(); - - /* setup the cascaded SLP/PER interrupts */ - if (request_irq(MSP_INT_SLP, no_action, IRQF_NO_THREAD, - "MSP CIC cascade", NULL)) - pr_err("Failed to register MSP CIC cascade interrupt\n"); - if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD, - "MSP PER cascade", NULL)) - pr_err("Failed to register MSP PER cascade interrupt\n"); -#endif -} diff --git a/arch/mips/pmcs-msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c deleted file mode 100644 index 0706010cc99f..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq_cic.c +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c - * - * This file define the irq handler for MSP CIC subsystem interrupts. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/bitops.h> -#include <linux/irq.h> - -#include <asm/mipsregs.h> - -#include <msp_cic_int.h> -#include <msp_regs.h> - -/* - * External API - */ -extern void msp_per_irq_init(void); -extern void msp_per_irq_dispatch(void); - - -/* - * Convenience Macro. Should be somewhere generic. - */ -#define get_current_vpe() \ - ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) - -#ifdef CONFIG_SMP - -#define LOCK_VPE(flags, mtflags) \ -do { \ - local_irq_save(flags); \ - mtflags = dmt(); \ -} while (0) - -#define UNLOCK_VPE(flags, mtflags) \ -do { \ - emt(mtflags); \ - local_irq_restore(flags);\ -} while (0) - -#define LOCK_CORE(flags, mtflags) \ -do { \ - local_irq_save(flags); \ - mtflags = dvpe(); \ -} while (0) - -#define UNLOCK_CORE(flags, mtflags) \ -do { \ - evpe(mtflags); \ - local_irq_restore(flags);\ -} while (0) - -#else - -#define LOCK_VPE(flags, mtflags) -#define UNLOCK_VPE(flags, mtflags) -#endif - -/* ensure writes to cic are completed */ -static inline void cic_wmb(void) -{ - const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG; - volatile u32 dummy_read; - - wmb(); - dummy_read = __raw_readl(cic_mem); - dummy_read++; -} - -static void unmask_cic_irq(struct irq_data *d) -{ - volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG; - int vpe; -#ifdef CONFIG_SMP - unsigned int mtflags; - unsigned long flags; - - /* - * Make sure we have IRQ affinity. It may have changed while - * we were processing the IRQ. - */ - if (!cpumask_test_cpu(smp_processor_id(), - irq_data_get_affinity_mask(d))) - return; -#endif - - vpe = get_current_vpe(); - LOCK_VPE(flags, mtflags); - cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE)); - UNLOCK_VPE(flags, mtflags); - cic_wmb(); -} - -static void mask_cic_irq(struct irq_data *d) -{ - volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG; - int vpe = get_current_vpe(); -#ifdef CONFIG_SMP - unsigned long flags, mtflags; -#endif - LOCK_VPE(flags, mtflags); - cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE)); - UNLOCK_VPE(flags, mtflags); - cic_wmb(); -} -static void msp_cic_irq_ack(struct irq_data *d) -{ - mask_cic_irq(d); - /* - * Only really necessary for 18, 16-14 and sometimes 3:0 - * (since these can be edge sensitive) but it doesn't - * hurt for the others - */ - *CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE)); -} - -/* Note: Limiting to VSMP. */ - -#ifdef CONFIG_MIPS_MT_SMP -static int msp_cic_irq_set_affinity(struct irq_data *d, - const struct cpumask *cpumask, bool force) -{ - int cpu; - unsigned long flags; - unsigned int mtflags; - unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE)); - volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG; - - /* timer balancing should be disabled in kernel code */ - BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER); - - LOCK_CORE(flags, mtflags); - /* enable if any of each VPE's TCs require this IRQ */ - for_each_online_cpu(cpu) { - if (cpumask_test_cpu(cpu, cpumask)) - cic_mask[cpu] |= imask; - else - cic_mask[cpu] &= ~imask; - - } - - UNLOCK_CORE(flags, mtflags); - return 0; - -} -#endif - -static struct irq_chip msp_cic_irq_controller = { - .name = "MSP_CIC", - .irq_mask = mask_cic_irq, - .irq_mask_ack = msp_cic_irq_ack, - .irq_unmask = unmask_cic_irq, - .irq_ack = msp_cic_irq_ack, -#ifdef CONFIG_MIPS_MT_SMP - .irq_set_affinity = msp_cic_irq_set_affinity, -#endif -}; - -void __init msp_cic_irq_init(void) -{ - int i; - /* Mask/clear interrupts. */ - *CIC_VPE0_MSK_REG = 0x00000000; - *CIC_VPE1_MSK_REG = 0x00000000; - *CIC_STS_REG = 0xFFFFFFFF; - /* - * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI. - * These inputs map to EXT_INT_POL[6:4] inside the CIC. - * They are to be active low, level sensitive. - */ - *CIC_EXT_CFG_REG &= 0xFFFF8F8F; - - /* initialize all the IRQ descriptors */ - for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) { - irq_set_chip_and_handler(i, &msp_cic_irq_controller, - handle_level_irq); - } - - /* Initialize the PER interrupt sub-system */ - msp_per_irq_init(); -} - -/* CIC masked by CIC vector processing before dispatch called */ -void msp_cic_irq_dispatch(void) -{ - volatile u32 *cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG; - u32 cic_mask; - u32 pending; - int cic_status = *CIC_STS_REG; - cic_mask = cic_msk_reg[get_current_vpe()]; - pending = cic_status & cic_mask; - if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) { - do_IRQ(MSP_INT_VPE0_TIMER); - } else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) { - do_IRQ(MSP_INT_VPE1_TIMER); - } else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) { - msp_per_irq_dispatch(); - } else if (pending) { - do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1); - } else{ - spurious_interrupt(); - } -} diff --git a/arch/mips/pmcs-msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c deleted file mode 100644 index b284412b2923..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq_per.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c - * - * This file define the irq handler for MSP PER subsystem interrupts. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> - -#include <asm/mipsregs.h> - -#include <msp_cic_int.h> -#include <msp_regs.h> - - -/* - * Convenience Macro. Should be somewhere generic. - */ -#define get_current_vpe() \ - ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) - -#ifdef CONFIG_SMP -/* - * The PER registers must be protected from concurrent access. - */ - -static DEFINE_SPINLOCK(per_lock); -#endif - -/* ensure writes to per are completed */ - -static inline void per_wmb(void) -{ - const volatile void __iomem *per_mem = PER_INT_MSK_REG; - volatile u32 dummy_read; - - wmb(); - dummy_read = __raw_readl(per_mem); - dummy_read++; -} - -static inline void unmask_per_irq(struct irq_data *d) -{ -#ifdef CONFIG_SMP - unsigned long flags; - spin_lock_irqsave(&per_lock, flags); - *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); - spin_unlock_irqrestore(&per_lock, flags); -#else - *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); -#endif - per_wmb(); -} - -static inline void mask_per_irq(struct irq_data *d) -{ -#ifdef CONFIG_SMP - unsigned long flags; - spin_lock_irqsave(&per_lock, flags); - *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); - spin_unlock_irqrestore(&per_lock, flags); -#else - *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); -#endif - per_wmb(); -} - -static inline void msp_per_irq_ack(struct irq_data *d) -{ - mask_per_irq(d); - /* - * In the PER interrupt controller, only bits 11 and 10 - * are write-to-clear, (SPI TX complete, SPI RX complete). - * It does nothing for any others. - */ - *PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE)); -} - -#ifdef CONFIG_SMP -static int msp_per_irq_set_affinity(struct irq_data *d, - const struct cpumask *affinity, bool force) -{ - /* WTF is this doing ????? */ - unmask_per_irq(d); - return 0; -} -#endif - -static struct irq_chip msp_per_irq_controller = { - .name = "MSP_PER", - .irq_enable = unmask_per_irq, - .irq_disable = mask_per_irq, - .irq_ack = msp_per_irq_ack, -#ifdef CONFIG_SMP - .irq_set_affinity = msp_per_irq_set_affinity, -#endif -}; - -void __init msp_per_irq_init(void) -{ - int i; - /* Mask/clear interrupts. */ - *PER_INT_MSK_REG = 0x00000000; - *PER_INT_STS_REG = 0xFFFFFFFF; - /* initialize all the IRQ descriptors */ - for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) { - irq_set_chip(i, &msp_per_irq_controller); - } -} - -void msp_per_irq_dispatch(void) -{ - u32 per_mask = *PER_INT_MSK_REG; - u32 per_status = *PER_INT_STS_REG; - u32 pending; - - pending = per_status & per_mask; - if (pending) { - do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1); - } else { - spurious_interrupt(); - } -} diff --git a/arch/mips/pmcs-msp71xx/msp_irq_slp.c b/arch/mips/pmcs-msp71xx/msp_irq_slp.c deleted file mode 100644 index 097a5fd3b06b..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq_slp.c +++ /dev/null @@ -1,102 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * This file define the irq handler for MSP SLM subsystem interrupts. - * - * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/bitops.h> - -#include <asm/mipsregs.h> - -#include <msp_slp_int.h> -#include <msp_regs.h> - -static inline void unmask_msp_slp_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE)); - else - *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE)); -} - -static inline void mask_msp_slp_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE)); - else - *PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE)); -} - -/* - * While we ack the interrupt interrupts are disabled and thus we don't need - * to deal with concurrency issues. Same for msp_slp_irq_end. - */ -static inline void ack_msp_slp_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE)); - else - *PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE)); -} - -static struct irq_chip msp_slp_irq_controller = { - .name = "MSP_SLP", - .irq_ack = ack_msp_slp_irq, - .irq_mask = mask_msp_slp_irq, - .irq_unmask = unmask_msp_slp_irq, -}; - -void __init msp_slp_irq_init(void) -{ - int i; - - /* Mask/clear interrupts. */ - *SLP_INT_MSK_REG = 0x00000000; - *PER_INT_MSK_REG = 0x00000000; - *SLP_INT_STS_REG = 0xFFFFFFFF; - *PER_INT_STS_REG = 0xFFFFFFFF; - - /* initialize all the IRQ descriptors */ - for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++) - irq_set_chip_and_handler(i, &msp_slp_irq_controller, - handle_level_irq); -} - -void msp_slp_irq_dispatch(void) -{ - u32 pending; - int intbase; - - intbase = MSP_SLP_INTBASE; - pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG; - - /* check for PER interrupt */ - if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) { - intbase = MSP_PER_INTBASE; - pending = *PER_INT_STS_REG & *PER_INT_MSK_REG; - } - - /* check for spurious interrupt */ - if (pending == 0x00000000) { - printk(KERN_ERR "Spurious %s interrupt?\n", - (intbase == MSP_SLP_INTBASE) ? "SLP" : "PER"); - return; - } - - /* dispatch the irq */ - do_IRQ(ffs(pending) + intbase - 1); -} diff --git a/arch/mips/pmcs-msp71xx/msp_pci.c b/arch/mips/pmcs-msp71xx/msp_pci.c deleted file mode 100644 index 428dea23c35c..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_pci.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The setup file for PCI related hardware on PMC-Sierra MSP processors. - * - * Copyright 2005-2006 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> - -#include <msp_prom.h> -#include <msp_regs.h> - -extern void msp_pci_init(void); - -static int __init msp_pci_setup(void) -{ -#if 0 /* Linux 2.6 initialization code to be completed */ - if (getdeviceid() & DEV_ID_SINGLE_PC) { - /* If single card mode */ - slmRegs *sreg = (slmRegs *) SREG_BASE; - - sreg->single_pc_enable = SINGLE_PCCARD; - } -#endif - - msp_pci_init(); - - return 0; -} - -subsys_initcall(msp_pci_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c deleted file mode 100644 index 800a21b8b8b0..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_prom.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, assuming a version of - * pmon is the boot code. - * - * Copyright 2000,2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/xx files. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/slab.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm-generic/sections.h> -#include <asm/page.h> - -#include <msp_prom.h> -#include <msp_regs.h> - -/* global PROM environment variables and pointers */ -int prom_argc; -char **prom_argv, **prom_envp; -int *prom_vec; - -/* debug flag */ -int init_debug = 1; - -/* memory blocks */ -struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -#define MAX_PROM_MEM 5 -static phys_addr_t prom_mem_base[MAX_PROM_MEM] __initdata; -static phys_addr_t prom_mem_size[MAX_PROM_MEM] __initdata; -static unsigned int nr_prom_mem __initdata; - -/* default feature sets */ -static char msp_default_features[] = -#if defined(CONFIG_PMC_MSP4200_EVAL) \ - || defined(CONFIG_PMC_MSP4200_GW) - "ERER"; -#elif defined(CONFIG_PMC_MSP7120_EVAL) \ - || defined(CONFIG_PMC_MSP7120_GW) - "EMEMSP"; -#elif defined(CONFIG_PMC_MSP7120_FPGA) - "EMEM"; -#endif - -/* conversion functions */ -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -int str2eaddr(unsigned char *ea, unsigned char *str) -{ - int index = 0; - unsigned char num = 0; - - while (*str != '\0') { - if ((*str == '.') || (*str == ':')) { - ea[index++] = num; - num = 0; - str++; - } else { - num = num << 4; - num |= str2hexnum(*str++); - } - } - - if (index == 5) { - ea[index++] = num; - return 0; - } else - return -1; -} -EXPORT_SYMBOL(str2eaddr); - -static inline unsigned long str2hex(unsigned char *str) -{ - int value = 0; - - while (*str) { - value = value << 4; - value |= str2hexnum(*str++); - } - - return value; -} - -/* function to query the system information */ -const char *get_system_type(void) -{ -#if defined(CONFIG_PMC_MSP4200_EVAL) - return "PMC-Sierra MSP4200 Eval Board"; -#elif defined(CONFIG_PMC_MSP4200_GW) - return "PMC-Sierra MSP4200 VoIP Gateway"; -#elif defined(CONFIG_PMC_MSP7120_EVAL) - return "PMC-Sierra MSP7120 Eval Board"; -#elif defined(CONFIG_PMC_MSP7120_GW) - return "PMC-Sierra MSP7120 Residential Gateway"; -#elif defined(CONFIG_PMC_MSP7120_FPGA) - return "PMC-Sierra MSP7120 FPGA"; -#else - #error "What is the type of *your* MSP?" -#endif -} - -int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv(ethaddr_name); - if (!ethaddr_str) { - printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name); - return -1; - } - - if (str2eaddr(ethernet_addr, ethaddr_str) == -1) { - printk(KERN_WARNING "%s badly formatted-<%s>\n", - ethaddr_name, ethaddr_str); - return -1; - } - - if (init_debug > 1) { - int i; - printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name); - for (i = 0; i < 5; i++) - printk(KERN_DEBUG "%02x:", - (unsigned char)*(ethernet_addr+i)); - printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i)); - } - - return 0; -} -EXPORT_SYMBOL(get_ethernet_addr); - -static char *get_features(void) -{ - char *feature = prom_getenv(FEATURES); - - if (feature == NULL) { - /* default features based on MACHINE_TYPE */ - feature = msp_default_features; - } - - return feature; -} - -static char test_feature(char c) -{ - char *feature = get_features(); - - while (*feature) { - if (*feature++ == c) - return *feature; - feature++; - } - - return FEATURE_NOEXIST; -} - -unsigned long get_deviceid(void) -{ - char *deviceid = prom_getenv(DEVICEID); - - if (deviceid == NULL) - return *DEV_ID_REG; - else - return str2hex(deviceid); -} - -char identify_pci(void) -{ - return test_feature(PCI_KEY); -} -EXPORT_SYMBOL(identify_pci); - -char identify_pcimux(void) -{ - return test_feature(PCIMUX_KEY); -} - -char identify_sec(void) -{ - return test_feature(SEC_KEY); -} -EXPORT_SYMBOL(identify_sec); - -char identify_spad(void) -{ - return test_feature(SPAD_KEY); -} -EXPORT_SYMBOL(identify_spad); - -char identify_tdm(void) -{ - return test_feature(TDM_KEY); -} -EXPORT_SYMBOL(identify_tdm); - -char identify_zsp(void) -{ - return test_feature(ZSP_KEY); -} -EXPORT_SYMBOL(identify_zsp); - -static char identify_enetfeature(char key, unsigned long interface_num) -{ - char *feature = get_features(); - - while (*feature) { - if (*feature++ == key && interface_num-- == 0) - return *feature; - feature++; - } - - return FEATURE_NOEXIST; -} - -char identify_enet(unsigned long interface_num) -{ - return identify_enetfeature(ENET_KEY, interface_num); -} -EXPORT_SYMBOL(identify_enet); - -char identify_enetTxD(unsigned long interface_num) -{ - return identify_enetfeature(ENETTXD_KEY, interface_num); -} -EXPORT_SYMBOL(identify_enetTxD); - -unsigned long identify_family(void) -{ - unsigned long deviceid; - - deviceid = get_deviceid(); - - return deviceid & CPU_DEVID_FAMILY; -} -EXPORT_SYMBOL(identify_family); - -unsigned long identify_revision(void) -{ - unsigned long deviceid; - - deviceid = get_deviceid(); - - return deviceid & CPU_DEVID_REVISION; -} -EXPORT_SYMBOL(identify_revision); - -/* PROM environment functions */ -char *prom_getenv(char *env_name) -{ - /* - * Return a pointer to the given environment variable. prom_envp - * points to a null terminated array of pointers to variables. - * Environment variables are stored in the form of "memsize=64" - */ - - char **var = prom_envp; - int i = strlen(env_name); - - while (*var) { - if (strncmp(env_name, *var, i) == 0) { - return *var + strlen(env_name) + 1; - } - var++; - } - - return NULL; -} - -/* PROM commandline functions */ -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while (actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} - -/* memory allocation functions */ -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - - if (type == BOOT_MEM_ROM_DATA) { - if (nr_prom_mem >= MAX_PROM_MEM) { - pr_err("Too many ROM DATA regions"); - continue; - } - prom_mem_base[nr_prom_mem] = base; - prom_mem_size[nr_prom_mem] = size; - nr_prom_mem++; - } - } -} - -void __init prom_free_prom_memory(void) -{ - int argc; - char **argv; - char **envp; - char *ptr; - int len = 0; - int i; - - /* - * preserve environment variables and command line from pmon/bbload - * first preserve the command line - */ - for (argc = 0; argc < prom_argc; argc++) { - len += sizeof(char *); /* length of pointer */ - len += strlen(prom_argv[argc]) + 1; /* length of string */ - } - len += sizeof(char *); /* plus length of null pointer */ - - argv = kmalloc(len, GFP_KERNEL); - ptr = (char *) &argv[prom_argc + 1]; /* strings follow array */ - - for (argc = 0; argc < prom_argc; argc++) { - argv[argc] = ptr; - strcpy(ptr, prom_argv[argc]); - ptr += strlen(prom_argv[argc]) + 1; - } - argv[prom_argc] = NULL; /* end array with null pointer */ - prom_argv = argv; - - /* next preserve the environment variables */ - len = 0; - i = 0; - for (envp = prom_envp; *envp != NULL; envp++) { - i++; /* count number of environment variables */ - len += sizeof(char *); /* length of pointer */ - len += strlen(*envp) + 1; /* length of string */ - } - len += sizeof(char *); /* plus length of null pointer */ - - envp = kmalloc(len, GFP_KERNEL); - ptr = (char *) &envp[i+1]; - - for (argc = 0; argc < i; argc++) { - envp[argc] = ptr; - strcpy(ptr, prom_envp[argc]); - ptr += strlen(prom_envp[argc]) + 1; - } - envp[i] = NULL; /* end array with null pointer */ - prom_envp = envp; - - for (i = 0; i < nr_prom_mem; i++) { - free_init_pages("prom memory", - prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]); - } -} - -struct prom_pmemblock *__init prom_getmdesc(void) -{ - static char memsz_env[] __initdata = "memsize"; - static char heaptop_env[] __initdata = "heaptop"; - char *str; - unsigned int memsize; - unsigned int heaptop; - int i; - - str = prom_getenv(memsz_env); - if (!str) { - ppfinit("memsize not set in boot prom, " - "set to default (32Mb)\n"); - memsize = 0x02000000; - } else { - memsize = simple_strtol(str, NULL, 0); - - if (memsize == 0) { - /* if memsize is a bad size, use reasonable default */ - memsize = 0x02000000; - } - - /* convert to physical address (removing caching bits, etc) */ - memsize = CPHYSADDR(memsize); - } - - str = prom_getenv(heaptop_env); - if (!str) { - heaptop = CPHYSADDR((u32)&_text); - ppfinit("heaptop not set in boot prom, " - "set to default 0x%08x\n", heaptop); - } else { - heaptop = simple_strtol(str, NULL, 16); - if (heaptop == 0) { - /* heaptop conversion bad, might have 0xValue */ - heaptop = simple_strtol(str, NULL, 0); - - if (heaptop == 0) { - /* heaptop still bad, use reasonable default */ - heaptop = CPHYSADDR((u32)&_text); - } - } - - /* convert to physical address (removing caching bits, etc) */ - heaptop = CPHYSADDR((u32)heaptop); - } - - /* the base region */ - i = 0; - mdesc[i].type = BOOT_MEM_RESERVED; - mdesc[i].base = 0x00000000; - mdesc[i].size = PAGE_ALIGN(0x300 + 0x80); - /* jtag interrupt vector + sizeof vector */ - - /* PMON data */ - if (heaptop > mdesc[i].base + mdesc[i].size) { - i++; /* 1 */ - mdesc[i].type = BOOT_MEM_ROM_DATA; - mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size; - mdesc[i].size = heaptop - mdesc[i].base; - } - - /* end of PMON data to start of kernel -- probably zero .. */ - if (heaptop != CPHYSADDR((u32)_text)) { - i++; /* 2 */ - mdesc[i].type = BOOT_MEM_RAM; - mdesc[i].base = heaptop; - mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base; - } - - /* kernel proper */ - i++; /* 3 */ - mdesc[i].type = BOOT_MEM_RESERVED; - mdesc[i].base = CPHYSADDR((u32)_text); - mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base; - - /* Remainder of RAM -- under memsize */ - i++; /* 5 */ - mdesc[i].type = yamon_free; - mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size; - mdesc[i].size = memsize - mdesc[i].base; - - return &mdesc[0]; -} diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c deleted file mode 100644 index 940c684f6921..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_serial.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * The setup file for serial related hardware on PMC-Sierra MSP processors. - * - * Copyright 2005 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/serial_reg.h> -#include <linux/slab.h> - -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/serial.h> -#include <linux/serial_8250.h> - -#include <msp_prom.h> -#include <msp_int.h> -#include <msp_regs.h> - -struct msp_uart_data { - int last_lcr; -}; - -static void msp_serial_out(struct uart_port *p, int offset, int value) -{ - struct msp_uart_data *d = p->private_data; - - if (offset == UART_LCR) - d->last_lcr = value; - - offset <<= p->regshift; - writeb(value, p->membase + offset); -} - -static unsigned int msp_serial_in(struct uart_port *p, int offset) -{ - offset <<= p->regshift; - - return readb(p->membase + offset); -} - -static int msp_serial_handle_irq(struct uart_port *p) -{ - struct msp_uart_data *d = p->private_data; - unsigned int iir = readb(p->membase + (UART_IIR << p->regshift)); - - if (serial8250_handle_irq(p, iir)) { - return 1; - } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { - /* - * The DesignWare APB UART has an Busy Detect (0x07) interrupt - * meaning an LCR write attempt occurred while the UART was - * busy. The interrupt must be cleared by reading the UART - * status register (USR) and the LCR re-written. - * - * Note: MSP reserves 0x20 bytes of address space for the UART - * and the USR is mapped in a separate block at an offset of - * 0xc0 from the start of the UART. - */ - (void)readb(p->membase + 0xc0); - writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift)); - - return 1; - } - - return 0; -} - -void __init msp_serial_setup(void) -{ - char *s; - char *endp; - struct uart_port up; - unsigned int uartclk; - - memset(&up, 0, sizeof(up)); - - /* Check if clock was specified in environment */ - s = prom_getenv("uartfreqhz"); - if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0)) - uartclk = MSP_BASE_BAUD; - ppfinit("UART clock set to %d\n", uartclk); - - /* Initialize first serial port */ - up.mapbase = MSP_UART0_BASE; - up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN); - up.irq = MSP_INT_UART0; - up.uartclk = uartclk; - up.regshift = 2; - up.iotype = UPIO_MEM; - up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - up.type = PORT_16550A; - up.line = 0; - up.serial_out = msp_serial_out; - up.serial_in = msp_serial_in; - up.handle_irq = msp_serial_handle_irq; - up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL); - if (!up.private_data) { - pr_err("failed to allocate uart private data\n"); - return; - } - if (early_serial_setup(&up)) { - kfree(up.private_data); - pr_err("Early serial init of port 0 failed\n"); - } - - /* Initialize the second serial port, if one exists */ - switch (mips_machtype) { - case MACH_MSP4200_EVAL: - case MACH_MSP4200_GW: - case MACH_MSP4200_FPGA: - case MACH_MSP7120_EVAL: - case MACH_MSP7120_GW: - case MACH_MSP7120_FPGA: - /* Enable UART1 on MSP4200 and MSP7120 */ - *GPIO_CFG2_REG = 0x00002299; - break; - - default: - return; /* No second serial port, good-bye. */ - } - - up.mapbase = MSP_UART1_BASE; - up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN); - up.irq = MSP_INT_UART1; - up.line = 1; - up.private_data = (void*)UART1_STATUS_REG; - if (early_serial_setup(&up)) { - kfree(up.private_data); - pr_err("Early serial init of port 1 failed\n"); - } -} diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c deleted file mode 100644 index e0f20f487d96..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_setup.c +++ /dev/null @@ -1,228 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * The generic setup file for PMC-Sierra MSP processors - * - * Copyright 2005-2007 PMC-Sierra, Inc, - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - */ - -#include <linux/delay.h> - -#include <asm/bootinfo.h> -#include <asm/cacheflush.h> -#include <asm/idle.h> -#include <asm/r4kcache.h> -#include <asm/reboot.h> -#include <asm/smp-ops.h> -#include <asm/time.h> - -#include <msp_prom.h> -#include <msp_regs.h> - -#if defined(CONFIG_PMC_MSP7120_GW) -#include <msp_regops.h> -#define MSP_BOARD_RESET_GPIO 9 -#endif - -extern void msp_serial_setup(void); - -#if defined(CONFIG_PMC_MSP7120_EVAL) || \ - defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_FPGA) -/* - * Performs the reset for MSP7120-based boards - */ -void msp7120_reset(void) -{ - void *start, *end, *iptr; - - /* Diasble all interrupts */ - local_irq_disable(); -#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING - dvpe(); -#endif - - /* Cache the reset code of this function */ - __asm__ __volatile__ ( - " .set push \n" - " .set arch=r4000 \n" - " la %0,startpoint \n" - " la %1,endpoint \n" - " .set pop \n" - : "=r" (start), "=r" (end) - : - ); - - for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1)); - iptr < end; iptr += L1_CACHE_BYTES) - cache_op(Fill_I, iptr); - - __asm__ __volatile__ ( - "startpoint: \n" - ); - - /* Put the DDRC into self-refresh mode */ - DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16); - - /* - * IMPORTANT! - * DO NOT do anything from here on out that might even - * think about fetching from RAM - i.e., don't call any - * non-inlined functions, and be VERY sure that any inline - * functions you do call do NOT access any sort of RAM - * anywhere! - */ - - /* Wait a bit for the DDRC to settle */ - mdelay(125); - -#if defined(CONFIG_PMC_MSP7120_GW) - /* - * Set GPIO 9 HI, (tied to board reset logic) - * GPIO 9 is the 4th GPIO of register 3 - * - * NOTE: We cannot use the higher-level msp_gpio_mode()/out() - * as GPIO char driver may not be enabled and it would look up - * data inRAM! - */ - set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000); - set_reg32(GPIO_DATA3_REG, 8); - - /* - * In case GPIO9 doesn't reset the board (jumper configurable!) - * fallback to device reset below. - */ -#endif - /* Set bit 1 of the MSP7120 reset register */ - *RST_SET_REG = 0x00000001; - - __asm__ __volatile__ ( - "endpoint: \n" - ); -} -#endif - -void msp_restart(char *command) -{ - printk(KERN_WARNING "Now rebooting .......\n"); - -#if defined(CONFIG_PMC_MSP7120_EVAL) || \ - defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_FPGA) - msp7120_reset(); -#else - /* No chip-specific reset code, just jump to the ROM reset vector */ - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - __flush_cache_all(); - write_c0_wired(0); - - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -#endif -} - -void msp_halt(void) -{ - printk(KERN_WARNING "\n** You can safely turn off the power\n"); - while (1) - /* If possible call official function to get CPU WARs */ - if (cpu_wait) - (*cpu_wait)(); - else - __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0"); -} - -void msp_power_off(void) -{ - msp_halt(); -} - -void __init plat_mem_setup(void) -{ - _machine_restart = msp_restart; - _machine_halt = msp_halt; - pm_power_off = msp_power_off; -} - -void __init prom_init(void) -{ - unsigned long family; - unsigned long revision; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - /* - * Someday we can use this with PMON2000 to get a - * platform call prom routines for output etc. without - * having to use grody hacks. For now it's unused. - * - * struct callvectors *cv = (struct callvectors *) fw_arg3; - */ - family = identify_family(); - revision = identify_revision(); - - switch (family) { - case FAMILY_FPGA: - if (FPGA_IS_MSP4200(revision)) { - /* Old-style revision ID */ - mips_machtype = MACH_MSP4200_FPGA; - } else { - mips_machtype = MACH_MSP_OTHER; - } - break; - - case FAMILY_MSP4200: -#if defined(CONFIG_PMC_MSP4200_EVAL) - mips_machtype = MACH_MSP4200_EVAL; -#elif defined(CONFIG_PMC_MSP4200_GW) - mips_machtype = MACH_MSP4200_GW; -#else - mips_machtype = MACH_MSP_OTHER; -#endif - break; - - case FAMILY_MSP4200_FPGA: - mips_machtype = MACH_MSP4200_FPGA; - break; - - case FAMILY_MSP7100: -#if defined(CONFIG_PMC_MSP7120_EVAL) - mips_machtype = MACH_MSP7120_EVAL; -#elif defined(CONFIG_PMC_MSP7120_GW) - mips_machtype = MACH_MSP7120_GW; -#else - mips_machtype = MACH_MSP_OTHER; -#endif - break; - - case FAMILY_MSP7100_FPGA: - mips_machtype = MACH_MSP7120_FPGA; - break; - - default: - /* we don't recognize the machine */ - mips_machtype = MACH_UNKNOWN; - panic("***Bogosity factor five***, exiting"); - break; - } - - prom_init_cmdline(); - - prom_meminit(); - - /* - * Sub-system setup follows. - * Setup functions can either be called here or using the - * subsys_initcall mechanism (i.e. see msp_pci_setup). The - * order in which they are called can be changed by using the - * link order in arch/mips/pmc-sierra/msp71xx/Makefile. - * - * NOTE: Please keep sub-system specific initialization code - * in separate specific files. - */ - msp_serial_setup(); - - register_vsmp_smp_ops(); -} diff --git a/arch/mips/pmcs-msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c deleted file mode 100644 index 00092e2924ec..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_smp.c +++ /dev/null @@ -1,56 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * Copyright (C) 2010 PMC-Sierra, Inc. - * - * VSMP support for MSP platforms . Derived from malta vsmp support. - */ -#include <linux/smp.h> -#include <linux/interrupt.h> - -#include <asm/setup.h> - -#ifdef CONFIG_MIPS_MT_SMP -#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ -#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for call */ - - -static void ipi_resched_dispatch(void) -{ - do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ); -} - -static void ipi_call_dispatch(void) -{ - do_IRQ(MIPS_CPU_IPI_CALL_IRQ); -} - -static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) -{ - return IRQ_HANDLED; -} - -static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) -{ - generic_smp_call_function_interrupt(); - - return IRQ_HANDLED; -} - -void __init arch_init_ipiirq(int irq, const char *name, irq_handler_t handler) -{ - if (request_irq(irq, handler, IRQF_PERCPU, name, NULL)) - pr_err("Failed to request irq %d (%s)\n", irq, name); - irq_set_handler(irq, handle_percpu_irq); -} - -void __init msp_vsmp_int_init(void) -{ - set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); - set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); - arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, "IPI_resched", - ipi_resched_interrupt); - arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, "IPI_call", ipi_call_interrupt); -} -#endif /* CONFIG_MIPS_MT_SMP */ diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c deleted file mode 100644 index 9c629829f447..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_time.c +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Setting up the clock on MSP SOCs. No RTC typically. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * ######################################################################## - */ - -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/ptrace.h> - -#include <asm/cevt-r4k.h> -#include <asm/mipsregs.h> -#include <asm/time.h> - -#include <msp_prom.h> -#include <msp_int.h> -#include <msp_regs.h> - -#define get_current_vpe() \ - ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) - -static int tim_installed; - -void __init plat_time_init(void) -{ - char *endp, *s; - unsigned long cpu_rate = 0; - - if (cpu_rate == 0) { - s = prom_getenv("clkfreqhz"); - cpu_rate = simple_strtoul(s, &endp, 10); - if (endp != NULL && *endp != 0) { - printk(KERN_ERR - "Clock rate in Hz parse error: %s\n", s); - cpu_rate = 0; - } - } - - if (cpu_rate == 0) { - s = prom_getenv("clkfreq"); - cpu_rate = 1000 * simple_strtoul(s, &endp, 10); - if (endp != NULL && *endp != 0) { - printk(KERN_ERR - "Clock rate in MHz parse error: %s\n", s); - cpu_rate = 0; - } - } - - if (cpu_rate == 0) { -#if defined(CONFIG_PMC_MSP7120_EVAL) \ - || defined(CONFIG_PMC_MSP7120_GW) - cpu_rate = 400000000; -#elif defined(CONFIG_PMC_MSP7120_FPGA) - cpu_rate = 25000000; -#else - cpu_rate = 150000000; -#endif - printk(KERN_ERR - "Failed to determine CPU clock rate, " - "assuming %ld hz ...\n", cpu_rate); - } - - printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate); - - /* timer frequency is 1/2 clock rate */ - mips_hpt_frequency = cpu_rate/2; -} - -unsigned int get_c0_compare_int(void) -{ - unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED; - - /* MIPS_MT modes may want timer for second VPE */ - if ((get_current_vpe()) && !tim_installed) { - if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags, - "timer", c0_compare_interrupt)) - pr_err("Failed to register timer interrupt\n"); - tim_installed++; - } - - return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER; -} diff --git a/arch/mips/pmcs-msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c deleted file mode 100644 index d38ac70b5a2e..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_usb.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * The setup file for USB related hardware on PMC-Sierra MSP processors. - * - * Copyright 2006 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) - -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/mipsregs.h> - -#include <msp_regs.h> -#include <msp_int.h> -#include <msp_prom.h> -#include <msp_usb.h> - - -#if defined(CONFIG_USB_EHCI_HCD) -static struct resource msp_usbhost0_resources[] = { - [0] = { /* EHCI-HS operational and capabilities registers */ - .start = MSP_USB0_HS_START, - .end = MSP_USB0_HS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, - }, - [2] = { /* MSBus-to-AMBA bridge register space */ - .start = MSP_USB0_MAB_START, - .end = MSP_USB0_MAB_END, - .flags = IORESOURCE_MEM, - }, - [3] = { /* Identification and general hardware parameters */ - .start = MSP_USB0_ID_START, - .end = MSP_USB0_ID_END, - .flags = IORESOURCE_MEM, - }, -}; - -static u64 msp_usbhost0_dma_mask = 0xffffffffUL; - -static struct mspusb_device msp_usbhost0_device = { - .dev = { - .name = "pmcmsp-ehci", - .id = 0, - .dev = { - .dma_mask = &msp_usbhost0_dma_mask, - .coherent_dma_mask = 0xffffffffUL, - }, - .num_resources = ARRAY_SIZE(msp_usbhost0_resources), - .resource = msp_usbhost0_resources, - }, -}; -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_GADGET) -static struct resource msp_usbdev0_resources[] = { - [0] = { /* EHCI-HS operational and capabilities registers */ - .start = MSP_USB0_HS_START, - .end = MSP_USB0_HS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, - }, - [2] = { /* MSBus-to-AMBA bridge register space */ - .start = MSP_USB0_MAB_START, - .end = MSP_USB0_MAB_END, - .flags = IORESOURCE_MEM, - }, - [3] = { /* Identification and general hardware parameters */ - .start = MSP_USB0_ID_START, - .end = MSP_USB0_ID_END, - .flags = IORESOURCE_MEM, - }, -}; - -static u64 msp_usbdev_dma_mask = 0xffffffffUL; - -/* This may need to be converted to a mspusb_device, too. */ -static struct mspusb_device msp_usbdev0_device = { - .dev = { - .name = "msp71xx_udc", - .id = 0, - .dev = { - .dma_mask = &msp_usbdev_dma_mask, - .coherent_dma_mask = 0xffffffffUL, - }, - .num_resources = ARRAY_SIZE(msp_usbdev0_resources), - .resource = msp_usbdev0_resources, - }, -}; -#endif /* CONFIG_USB_GADGET */ - -static int __init msp_usb_setup(void) -{ - char *strp; - char envstr[32]; - struct platform_device *msp_devs[NUM_USB_DEVS]; - unsigned int val; - - /* construct environment name usbmode */ - /* set usbmode <host/device> as pmon environment var */ - /* - * Could this perhaps be integrated into the "features" env var? - * Use the features key "U", and follow with "H" for host-mode, - * "D" for device-mode. If it works for Ethernet, why not USB... - * -- hammtrev, 2007/03/22 - */ - snprintf(&envstr[0], sizeof(envstr), "usbmode"); - - /* set default host mode */ - val = 1; - - /* get environment string */ - strp = prom_getenv(&envstr[0]); - if (strp) { - /* compare string */ - if (!strcmp(strp, "device")) - val = 0; - } - - if (val) { -#if defined(CONFIG_USB_EHCI_HCD) - msp_devs[0] = &msp_usbhost0_device.dev; - ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name); -#else - ppfinit("%s: echi_hcd not supported\n", __FILE__); -#endif /* CONFIG_USB_EHCI_HCD */ - } else { -#if defined(CONFIG_USB_GADGET) - /* get device mode structure */ - msp_devs[0] = &msp_usbdev0_device.dev; - ppfinit("platform add USB DEVICE done %s.\n" - , msp_devs[0]->name); -#else - ppfinit("%s: usb_gadget not supported\n", __FILE__); -#endif /* CONFIG_USB_GADGET */ - } - /* add device */ - platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); - - return 0; -} - -subsys_initcall(msp_usb_setup); -#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */ |