diff options
author | Jean Delvare <jdelvare@suse.de> | 2016-12-05 16:10:21 +0300 |
---|---|---|
committer | Bjorn Andersson <bjorn.andersson@linaro.org> | 2016-12-10 03:16:54 +0300 |
commit | 394c62000acb0b47b105d1b52e7d8f827c3293e3 (patch) | |
tree | 970d6bc10278dc4721dc9b532d84e14537f54e7f | |
parent | a4ff18e9ed1ddde1f0bcc26bd05730b50b227f48 (diff) | |
download | linux-394c62000acb0b47b105d1b52e7d8f827c3293e3.tar.xz |
remoteproc/ste: Delete unused driver
Back in July 2014 I asked around what was the intended target
platform for the STE Modem remoteproc driver, so that I could add the
proper hardware dependency to its config option. The answer I got was
that there was no known publicly available hardware needing it and it
was unlikely that there ever would.
So I think it's time to delete this driver to lower the maintenance
burden.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Suman Anna <s-anna@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-rw-r--r-- | drivers/remoteproc/Kconfig | 10 | ||||
-rw-r--r-- | drivers/remoteproc/Makefile | 1 | ||||
-rw-r--r-- | drivers/remoteproc/ste_modem_rproc.c | 342 |
3 files changed, 0 insertions, 353 deletions
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 1177329b7618..a572a68f6262 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -32,16 +32,6 @@ config OMAP_REMOTEPROC It's safe to say n here if you're not interested in multimedia offloading or just want a bare minimum kernel. -config STE_MODEM_RPROC - tristate "STE-Modem remoteproc support" - depends on HAS_DMA - depends on REMOTEPROC - default n - help - Say y or m here to support STE-Modem shared memory driver. - This can be either built-in or a loadable module. - If unsure say N. - config WKUP_M3_RPROC tristate "AMx3xx Wakeup M3 remoteproc support" depends on SOC_AM33XX || SOC_AM43XX diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index 6290c3f72e83..0938ea3c41ba 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -9,7 +9,6 @@ remoteproc-y += remoteproc_sysfs.o remoteproc-y += remoteproc_virtio.o remoteproc-y += remoteproc_elf_loader.o obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o -obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_QCOM_ADSP_PIL) += qcom_adsp_pil.o diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c deleted file mode 100644 index 03d69a9a3c5b..000000000000 --- a/drivers/remoteproc/ste_modem_rproc.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright (C) ST-Ericsson AB 2012 - * Author: Sjur Brændeland <sjur.brandeland@stericsson.com> - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <linux/remoteproc.h> -#include <linux/ste_modem_shm.h> -#include "remoteproc_internal.h" - -#define SPROC_FW_SIZE (50 * 4096) -#define SPROC_MAX_TOC_ENTRIES 32 -#define SPROC_MAX_NOTIFY_ID 14 -#define SPROC_RESOURCE_NAME "rsc-table" -#define SPROC_MODEM_NAME "ste-modem" -#define SPROC_MODEM_FIRMWARE SPROC_MODEM_NAME "-fw.bin" - -#define sproc_dbg(sproc, fmt, ...) \ - dev_dbg(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__) -#define sproc_err(sproc, fmt, ...) \ - dev_err(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__) - -/* STE-modem control structure */ -struct sproc { - struct rproc *rproc; - struct ste_modem_device *mdev; - int error; - void *fw_addr; - size_t fw_size; - dma_addr_t fw_dma_addr; -}; - -/* STE-Modem firmware entry */ -struct ste_toc_entry { - __le32 start; - __le32 size; - __le32 flags; - __le32 entry_point; - __le32 load_addr; - char name[12]; -}; - -/* - * The Table Of Content is located at the start of the firmware image and - * at offset zero in the shared memory region. The resource table typically - * contains the initial boot image (boot strap) and other information elements - * such as remoteproc resource table. Each entry is identified by a unique - * name. - */ -struct ste_toc { - struct ste_toc_entry table[SPROC_MAX_TOC_ENTRIES]; -}; - -/* Loads the firmware to shared memory. */ -static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw) -{ - struct sproc *sproc = rproc->priv; - - memcpy(sproc->fw_addr, fw->data, fw->size); - - return 0; -} - -/* Find the entry for resource table in the Table of Content */ -static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data) -{ - int i; - const struct ste_toc *toc = data; - - /* Search the table for the resource table */ - for (i = 0; i < SPROC_MAX_TOC_ENTRIES && - toc->table[i].start != 0xffffffff; i++) { - if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME, - sizeof(toc->table[i].name))) - return &toc->table[i]; - } - - return NULL; -} - -/* Find the resource table inside the remote processor's firmware. */ -static struct resource_table * -sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw, - int *tablesz) -{ - struct sproc *sproc = rproc->priv; - struct resource_table *table; - const struct ste_toc_entry *entry; - - if (!fw) - return NULL; - - entry = sproc_find_rsc_entry(fw->data); - if (!entry) { - sproc_err(sproc, "resource table not found in fw\n"); - return NULL; - } - - table = (void *)(fw->data + entry->start); - - /* sanity check size and offset of resource table */ - if (entry->start > SPROC_FW_SIZE || - entry->size > SPROC_FW_SIZE || - fw->size > SPROC_FW_SIZE || - entry->start + entry->size > fw->size || - sizeof(struct resource_table) > entry->size) { - sproc_err(sproc, "bad size of fw or resource table\n"); - return NULL; - } - - /* we don't support any version beyond the first */ - if (table->ver != 1) { - sproc_err(sproc, "unsupported fw ver: %d\n", table->ver); - return NULL; - } - - /* make sure reserved bytes are zeroes */ - if (table->reserved[0] || table->reserved[1]) { - sproc_err(sproc, "non zero reserved bytes\n"); - return NULL; - } - - /* make sure the offsets array isn't truncated */ - if (table->num > SPROC_MAX_TOC_ENTRIES || - table->num * sizeof(table->offset[0]) + - sizeof(struct resource_table) > entry->size) { - sproc_err(sproc, "resource table incomplete\n"); - return NULL; - } - - /* If the fw size has grown, release the previous fw allocation */ - if (SPROC_FW_SIZE < fw->size) { - sproc_err(sproc, "Insufficient space for fw (%d < %zd)\n", - SPROC_FW_SIZE, fw->size); - return NULL; - } - - sproc->fw_size = fw->size; - *tablesz = entry->size; - - return table; -} - -/* Find the resource table inside the remote processor's firmware. */ -static struct resource_table * -sproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) -{ - struct sproc *sproc = rproc->priv; - const struct ste_toc_entry *entry; - - if (!fw || !sproc->fw_addr) - return NULL; - - entry = sproc_find_rsc_entry(sproc->fw_addr); - if (!entry) { - sproc_err(sproc, "resource table not found in fw\n"); - return NULL; - } - - return sproc->fw_addr + entry->start; -} - -/* STE modem firmware handler operations */ -static const struct rproc_fw_ops sproc_fw_ops = { - .load = sproc_load_segments, - .find_rsc_table = sproc_find_rsc_table, - .find_loaded_rsc_table = sproc_find_loaded_rsc_table, -}; - -/* Kick the modem with specified notification id */ -static void sproc_kick(struct rproc *rproc, int vqid) -{ - struct sproc *sproc = rproc->priv; - - sproc_dbg(sproc, "kick vqid:%d\n", vqid); - - /* - * We need different notification IDs for RX and TX so add - * an offset on TX notification IDs. - */ - sproc->mdev->ops.kick(sproc->mdev, vqid + SPROC_MAX_NOTIFY_ID); -} - -/* Received a kick from a modem, kick the virtqueue */ -static void sproc_kick_callback(struct ste_modem_device *mdev, int vqid) -{ - struct sproc *sproc = mdev->drv_data; - - if (rproc_vq_interrupt(sproc->rproc, vqid) == IRQ_NONE) - sproc_dbg(sproc, "no message was found in vqid %d\n", vqid); -} - -static struct ste_modem_dev_cb sproc_dev_cb = { - .kick = sproc_kick_callback, -}; - -/* Start the STE modem */ -static int sproc_start(struct rproc *rproc) -{ - struct sproc *sproc = rproc->priv; - int i, err; - - sproc_dbg(sproc, "start ste-modem\n"); - - /* Sanity test the max_notifyid */ - if (rproc->max_notifyid > SPROC_MAX_NOTIFY_ID) { - sproc_err(sproc, "Notification IDs too high:%d\n", - rproc->max_notifyid); - return -EINVAL; - } - - /* Subscribe to notifications */ - for (i = 0; i <= rproc->max_notifyid; i++) { - err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i); - if (err) { - sproc_err(sproc, - "subscription of kicks failed:%d\n", err); - return err; - } - } - - /* Request modem start-up*/ - return sproc->mdev->ops.power(sproc->mdev, true); -} - -/* Stop the STE modem */ -static int sproc_stop(struct rproc *rproc) -{ - struct sproc *sproc = rproc->priv; - - sproc_dbg(sproc, "stop ste-modem\n"); - - return sproc->mdev->ops.power(sproc->mdev, false); -} - -static struct rproc_ops sproc_ops = { - .start = sproc_start, - .stop = sproc_stop, - .kick = sproc_kick, -}; - -/* STE modem device is unregistered */ -static int sproc_drv_remove(struct platform_device *pdev) -{ - struct ste_modem_device *mdev = - container_of(pdev, struct ste_modem_device, pdev); - struct sproc *sproc = mdev->drv_data; - - sproc_dbg(sproc, "remove ste-modem\n"); - - /* Reset device callback functions */ - sproc->mdev->ops.setup(sproc->mdev, NULL); - - /* Unregister as remoteproc device */ - rproc_del(sproc->rproc); - dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE, - sproc->fw_addr, sproc->fw_dma_addr); - rproc_free(sproc->rproc); - - mdev->drv_data = NULL; - - return 0; -} - -/* Handle probe of a modem device */ -static int sproc_probe(struct platform_device *pdev) -{ - struct ste_modem_device *mdev = - container_of(pdev, struct ste_modem_device, pdev); - struct sproc *sproc; - struct rproc *rproc; - int err; - - dev_dbg(&mdev->pdev.dev, "probe ste-modem\n"); - - if (!mdev->ops.setup || !mdev->ops.kick || !mdev->ops.kick_subscribe || - !mdev->ops.power) { - dev_err(&mdev->pdev.dev, "invalid mdev ops\n"); - return -EINVAL; - } - - rproc = rproc_alloc(&mdev->pdev.dev, mdev->pdev.name, &sproc_ops, - SPROC_MODEM_FIRMWARE, sizeof(*sproc)); - if (!rproc) - return -ENOMEM; - - sproc = rproc->priv; - sproc->mdev = mdev; - sproc->rproc = rproc; - rproc->has_iommu = false; - mdev->drv_data = sproc; - - /* Provide callback functions to modem device */ - sproc->mdev->ops.setup(sproc->mdev, &sproc_dev_cb); - - /* Set the STE-modem specific firmware handler */ - rproc->fw_ops = &sproc_fw_ops; - - /* - * STE-modem requires the firmware to be located - * at the start of the shared memory region. So we need to - * reserve space for firmware at the start. - */ - sproc->fw_addr = dma_alloc_coherent(rproc->dev.parent, SPROC_FW_SIZE, - &sproc->fw_dma_addr, - GFP_KERNEL); - if (!sproc->fw_addr) { - sproc_err(sproc, "Cannot allocate memory for fw\n"); - err = -ENOMEM; - goto free_rproc; - } - - /* Register as a remoteproc device */ - err = rproc_add(rproc); - if (err) - goto free_mem; - - return 0; - -free_mem: - dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE, - sproc->fw_addr, sproc->fw_dma_addr); -free_rproc: - /* Reset device data upon error */ - mdev->drv_data = NULL; - rproc_free(rproc); - return err; -} - -static struct platform_driver sproc_driver = { - .driver = { - .name = SPROC_MODEM_NAME, - }, - .probe = sproc_probe, - .remove = sproc_drv_remove, -}; - -module_platform_driver(sproc_driver); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("STE Modem driver using the Remote Processor Framework"); |