summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-04-30 23:01:02 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-04-30 23:01:02 +0300
commit592fa9532d4e4a7590ca383fd537eb4d53fa585a (patch)
tree48ead2d9a235f00fb2635613b1ed96e6b7d4bd4b
parentefd8929b9eec1cde120abb36d76dd00ff6711023 (diff)
parenta80f24945fcfdff31bdf04837145e56570741a67 (diff)
downloadlinux-592fa9532d4e4a7590ca383fd537eb4d53fa585a.tar.xz
Merge branch 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit - bigger refactoring for the MPC driver - support for full software nodes - no need to work around with only properties anymore - we now have 'devm_i2c_add_adapter', too - sub-system wide fixes for the RPM refcounting problem which often caused a leak when an error was encountered during probe - the rest is usual driver updates and improvements * 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching i2c: mediatek: Fix wrong dma sync flag i2c: mediatek: Fix send master code at more than 1MHz i2c: sh7760: fix IRQ error path i2c: i801: Add support for Intel Alder Lake PCH-M i2c: core: Fix spacing error by checkpatch i2c: s3c2410: simplify getting of_device_id match data i2c: nomadik: Fix space errors i2c: iop3xx: Fix coding style issues i2c: amd8111: Fix coding style issues i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource() i2c: mpc: Use device_get_match_data() helper i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery i2c: mpc: Use devm_clk_get_optional() i2c: mpc: Update license and copyright i2c: mpc: Interrupt driven transfer i2c: sh7760: add IRQ check i2c: rcar: add IRQ check i2c: mlxbf: add IRQ check i2c: jz4780: add IRQ check ...
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mpc.txt62
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mpc.yaml91
-rw-r--r--MAINTAINERS19
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c6
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c6
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c6
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c6
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c6
-rw-r--r--arch/arm/mach-davinci/board-sffsdr.c6
-rw-r--r--arch/arm/mach-omap1/board-osk.c6
-rw-r--r--arch/arm/mach-pxa/stargate2.c6
-rw-r--r--arch/arm/mach-s3c/mach-mini2440.c6
-rw-r--r--drivers/i2c/busses/Kconfig20
-rw-r--r--drivers/i2c/busses/Makefile2
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c268
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c1
-rw-r--r--drivers/i2c/busses/i2c-cadence.c9
-rw-r--r--drivers/i2c/busses/i2c-cht-wc.c6
-rw-r--r--drivers/i2c/busses/i2c-cp2615.c330
-rw-r--r--drivers/i2c/busses/i2c-designware-common.c3
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h8
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c155
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c61
-rw-r--r--drivers/i2c/busses/i2c-emev2.c5
-rw-r--r--drivers/i2c/busses/i2c-hisi.c504
-rw-r--r--drivers/i2c/busses/i2c-i801.c4
-rw-r--r--drivers/i2c/busses/i2c-icy.c32
-rw-r--r--drivers/i2c/busses/i2c-img-scb.c4
-rw-r--r--drivers/i2c/busses/i2c-imx-lpi2c.c2
-rw-r--r--drivers/i2c/busses/i2c-imx.c6
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c28
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c5
-rw-r--r--drivers/i2c/busses/i2c-mlxbf.c16
-rw-r--r--drivers/i2c/busses/i2c-mpc.c579
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c17
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c4
-rw-r--r--drivers/i2c/busses/i2c-nvidia-gpu.c6
-rw-r--r--drivers/i2c/busses/i2c-omap.c8
-rw-r--r--drivers/i2c/busses/i2c-powermac.c5
-rw-r--r--drivers/i2c/busses/i2c-qcom-cci.c4
-rw-r--r--drivers/i2c/busses/i2c-rcar.c89
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c9
-rw-r--r--drivers/i2c/busses/i2c-scmi.c2
-rw-r--r--drivers/i2c/busses/i2c-sh7760.c5
-rw-r--r--drivers/i2c/busses/i2c-sprd.c5
-rw-r--r--drivers/i2c/busses/i2c-stm32f7.c82
-rw-r--r--drivers/i2c/busses/i2c-tegra-bpmp.c79
-rw-r--r--drivers/i2c/busses/i2c-xgene-slimpro.c1
-rw-r--r--drivers/i2c/busses/i2c-xiic.c4
-rw-r--r--drivers/i2c/i2c-boardinfo.c11
-rw-r--r--drivers/i2c/i2c-core-base.c114
-rw-r--r--drivers/i2c/i2c-dev.c9
-rw-r--r--drivers/input/mouse/elantech.c6
-rw-r--r--drivers/platform/chrome/chromeos_laptop.c100
-rw-r--r--drivers/platform/x86/intel_cht_int33fe_microb.c6
-rw-r--r--include/linux/i2c.h13
56 files changed, 2082 insertions, 771 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
deleted file mode 100644
index 42a390526957..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-* I2C
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
- compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
- mpc5200 or mpc5200b. For the mpc5121, an additional node
- "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
-
-Recommended properties :
-
- - interrupts : <a b> where a is the interrupt number and b is a
- field that represents an encoding of the sense and level
- information for the interrupt. This should be encoded based on
- the information in section 2) depending on the type of interrupt
- controller you have.
- - fsl,preserve-clocking : boolean; if defined, the clock settings
- from the bootloader are preserved (not touched).
- - clock-frequency : desired I2C bus clock frequency in Hz.
- - fsl,timeout : I2C bus timeout in microseconds.
-
-Examples :
-
- /* MPC5121 based board */
- i2c@1740 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5121-i2c", "fsl-i2c";
- reg = <0x1740 0x20>;
- interrupts = <11 0x8>;
- interrupt-parent = <&ipic>;
- clock-frequency = <100000>;
- };
-
- i2ccontrol@1760 {
- compatible = "fsl,mpc5121-i2c-ctrl";
- reg = <0x1760 0x8>;
- };
-
- /* MPC5200B based board */
- i2c@3d00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- reg = <0x3d00 0x40>;
- interrupts = <2 15 0>;
- interrupt-parent = <&mpc5200_pic>;
- fsl,preserve-clocking;
- };
-
- /* MPC8544 base board */
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8544-i2c", "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <400000>;
- fsl,timeout = <10000>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
new file mode 100644
index 000000000000..7b553d559c83
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs
+
+maintainers:
+ - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mpc5200-i2c
+ - fsl,mpc5200-i2c
+ - fsl,mpc5121-i2c
+ - fsl,mpc8313-i2c
+ - fsl,mpc8543-i2c
+ - fsl,mpc8544-i2c
+ - const: fsl-i2c
+ - items:
+ - const: fsl,mpc5200b-i2c
+ - const: fsl,mpc5200-i2c
+ - const: fsl-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ fsl,preserve-clocking:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ if defined, the clock settings from the bootloader are
+ preserved (not touched)
+
+ fsl,timeout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ I2C bus timeout in microseconds
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ /* MPC5121 based board */
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <100000>;
+ };
+
+ /* MPC5200B based board */
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,preserve-clocking;
+ };
+
+ /* MPC8544 base board */
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <400000>;
+ fsl,timeout = <10000>;
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 30aa8253bf3a..55490e260c54 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4662,6 +4662,11 @@ F: drivers/counter/
F: include/linux/counter.h
F: include/linux/counter_enum.h
+CP2615 I2C DRIVER
+M: Bence Csókás <bence98@sch.bme.hu>
+S: Maintained
+F: drivers/i2c/busses/i2c-cp2615.c
+
CPMAC ETHERNET DRIVER
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
@@ -7235,6 +7240,13 @@ S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
F: drivers/i2c/busses/i2c-imx-lpi2c.c
+FREESCALE MPC I2C DRIVER
+M: Chris Packham <chris.packham@alliedtelesis.co.nz>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+F: drivers/i2c/busses/i2c-mpc.c
+
FREESCALE QORIQ DPAA ETHERNET DRIVER
M: Madalin Bucur <madalin.bucur@nxp.com>
L: netdev@vger.kernel.org
@@ -8157,6 +8169,13 @@ F: drivers/crypto/hisilicon/hpre/hpre.h
F: drivers/crypto/hisilicon/hpre/hpre_crypto.c
F: drivers/crypto/hisilicon/hpre/hpre_main.c
+HISILICON I2C CONTROLLER DRIVER
+M: Yicong Yang <yangyicong@hisilicon.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+W: https://www.hisilicon.com
+F: drivers/i2c/busses/i2c-hisi.c
+
HISILICON LPC BUS DRIVER
M: john.garry@huawei.com
S: Maintained
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a20ba12d876c..823c9cc98f18 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -454,6 +454,10 @@ static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
{ }
};
+static const struct software_node da830_evm_i2c_eeprom_node = {
+ .properties = da830_evm_i2c_eeprom_properties,
+};
+
static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
int gpio, unsigned ngpio, void *context)
{
@@ -485,7 +489,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
- .properties = da830_evm_i2c_eeprom_properties,
+ .swnode = &da830_evm_i2c_eeprom_node,
},
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index bdf31eb77620..b3bef74c982a 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -232,10 +232,14 @@ static const struct property_entry eeprom_properties[] = {
{ }
};
+static const struct software_node eeprom_node = {
+ .properties = eeprom_properties,
+};
+
static struct i2c_board_info i2c_info[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
- .properties = eeprom_properties,
+ .swnode = &eeprom_node,
},
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 7755cccec550..cce3a621eb20 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -541,6 +541,10 @@ static const struct property_entry eeprom_properties[] = {
{ }
};
+static const struct software_node eeprom_node = {
+ .properties = eeprom_properties,
+};
+
/*
* MSP430 supports RTC, card detection, input from IR remote, and
* a bit more. It triggers interrupts on GPIO(7) from pressing
@@ -647,7 +651,7 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
{
I2C_BOARD_INFO("24c256", 0x50),
- .properties = eeprom_properties,
+ .swnode = &eeprom_node,
},
{
I2C_BOARD_INFO("tlv320aic33", 0x1b),
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 952ddabc743e..ee91d81ebbfd 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -362,6 +362,10 @@ static const struct property_entry eeprom_properties[] = {
PROPERTY_ENTRY_U32("pagesize", 64),
{ }
};
+
+static const struct software_node eeprom_node = {
+ .properties = eeprom_properties,
+};
#endif
static u8 dm646x_iis_serializer_direction[] = {
@@ -430,7 +434,7 @@ static void evm_init_cpld(void)
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
- .properties = eeprom_properties,
+ .swnode = &eeprom_node,
},
{
I2C_BOARD_INFO("pcf8574a", 0x38),
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 5205008c8061..2127969beb96 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -197,6 +197,10 @@ static const struct property_entry mityomapl138_fd_chip_properties[] = {
{ }
};
+static const struct software_node mityomapl138_fd_chip_node = {
+ .properties = mityomapl138_fd_chip_properties,
+};
+
static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
.bus_freq = 100, /* kHz */
.bus_delay = 0, /* usec */
@@ -323,7 +327,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
},
{
I2C_BOARD_INFO("24c02", 0x50),
- .properties = mityomapl138_fd_chip_properties,
+ .swnode = &mityomapl138_fd_chip_node,
},
};
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 79b47958e992..6930b2f485d1 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -84,10 +84,14 @@ static const struct property_entry eeprom_properties[] = {
{ }
};
+static const struct software_node eeprom_node = {
+ .properties = eeprom_properties,
+};
+
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("24c64", 0x50),
- .properties = eeprom_properties,
+ .swnode = &eeprom_node,
},
/* Other I2C devices:
* MSP430, addr 0x23 (not used)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 0a4c9b0b13b0..e18b6f13300e 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -332,11 +332,15 @@ static const struct property_entry mistral_at24_properties[] = {
{ }
};
+static const struct software_node mistral_at24_node = {
+ .properties = mistral_at24_properties,
+};
+
static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
{
/* NOTE: powered from LCD supply */
I2C_BOARD_INFO("24c04", 0x50),
- .properties = mistral_at24_properties,
+ .swnode = &mistral_at24_node,
},
/* TODO when driver support is ready:
* - optionally ov9640 camera sensor at 0x30
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index e2353f7dcf01..7ad627465768 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -794,6 +794,10 @@ static const struct property_entry pca9500_eeprom_properties[] = {
{ }
};
+static const struct software_node pca9500_eeprom_node = {
+ .properties = pca9500_eeprom_properties,
+};
+
/**
* stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
**/
@@ -929,7 +933,7 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
}, {
.type = "24c02",
.addr = 0x57,
- .properties = pca9500_eeprom_properties,
+ .swnode = &pca9500_eeprom_node,
}, {
.type = "max1238",
.addr = 0x35,
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
index 4100905dfbd0..551ec660ab59 100644
--- a/arch/arm/mach-s3c/mach-mini2440.c
+++ b/arch/arm/mach-s3c/mach-mini2440.c
@@ -542,10 +542,14 @@ static const struct property_entry mini2440_at24_properties[] = {
{ }
};
+static const struct software_node mini2440_at24_node = {
+ .properties = mini2440_at24_properties,
+};
+
static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("24c08", 0x50),
- .properties = mini2440_at24_properties,
+ .swnode = &mini2440_at24_node,
},
};
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 543a05ed0c82..281a65d9b44b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -645,6 +645,16 @@ config I2C_HIGHLANDER
This driver can also be built as a module. If so, the module
will be called i2c-highlander.
+config I2C_HISI
+ tristate "HiSilicon I2C controller"
+ depends on ARM64 || COMPILE_TEST
+ help
+ Say Y here if you want to have Hisilicon I2C controller support
+ available on the Kunpeng Server.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-hisi.
+
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
depends on 4xx
@@ -1199,6 +1209,16 @@ config I2C_DLN2
This driver can also be built as a module. If so, the module
will be called i2c-dln2.
+config I2C_CP2615
+ tristate "Silicon Labs CP2615 USB sound card and I2C adapter"
+ depends on USB
+ help
+ If you say yes to this option, support will be included for Silicon
+ Labs CP2615's I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-cp2615.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 615f35e3e31f..69e9963615f6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_EMEV2) += i2c-emev2.o
obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
+obj-$(CONFIG_I2C_HISI) += i2c-hisi.o
obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMG) += i2c-img-scb.o
@@ -123,6 +124,7 @@ obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
+obj-$(CONFIG_I2C_CP2615) += i2c-cp2615.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 34862ad3423e..1ed7e945bb6d 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -186,9 +186,9 @@ static int amd_ec_write(struct amd_smbus *smbus, unsigned char address,
#define AMD_SMB_PRTCL_PEC 0x80
-static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
+static s32 amd8111_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write, u8 command, int size,
- union i2c_smbus_data * data)
+ union i2c_smbus_data *data)
{
struct amd_smbus *smbus = adap->algo_data;
unsigned char protocol, len, pec, temp[2];
@@ -199,130 +199,130 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0;
switch (size) {
- case I2C_SMBUS_QUICK:
- protocol |= AMD_SMB_PRTCL_QUICK;
- read_write = I2C_SMBUS_WRITE;
- break;
-
- case I2C_SMBUS_BYTE:
- if (read_write == I2C_SMBUS_WRITE) {
- status = amd_ec_write(smbus, AMD_SMB_CMD,
- command);
- if (status)
- return status;
- }
- protocol |= AMD_SMB_PRTCL_BYTE;
- break;
-
- case I2C_SMBUS_BYTE_DATA:
- status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ case I2C_SMBUS_QUICK:
+ protocol |= AMD_SMB_PRTCL_QUICK;
+ read_write = I2C_SMBUS_WRITE;
+ break;
+
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_WRITE) {
+ status = amd_ec_write(smbus, AMD_SMB_CMD,
+ command);
if (status)
return status;
- if (read_write == I2C_SMBUS_WRITE) {
- status = amd_ec_write(smbus, AMD_SMB_DATA,
- data->byte);
- if (status)
- return status;
- }
- protocol |= AMD_SMB_PRTCL_BYTE_DATA;
- break;
+ }
+ protocol |= AMD_SMB_PRTCL_BYTE;
+ break;
- case I2C_SMBUS_WORD_DATA:
- status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ case I2C_SMBUS_BYTE_DATA:
+ status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ if (status)
+ return status;
+ if (read_write == I2C_SMBUS_WRITE) {
+ status = amd_ec_write(smbus, AMD_SMB_DATA,
+ data->byte);
if (status)
return status;
- if (read_write == I2C_SMBUS_WRITE) {
- status = amd_ec_write(smbus, AMD_SMB_DATA,
- data->word & 0xff);
- if (status)
- return status;
- status = amd_ec_write(smbus, AMD_SMB_DATA + 1,
- data->word >> 8);
- if (status)
- return status;
- }
- protocol |= AMD_SMB_PRTCL_WORD_DATA | pec;
- break;
+ }
+ protocol |= AMD_SMB_PRTCL_BYTE_DATA;
+ break;
- case I2C_SMBUS_BLOCK_DATA:
- status = amd_ec_write(smbus, AMD_SMB_CMD, command);
- if (status)
- return status;
- if (read_write == I2C_SMBUS_WRITE) {
- len = min_t(u8, data->block[0],
- I2C_SMBUS_BLOCK_MAX);
- status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
- if (status)
- return status;
- for (i = 0; i < len; i++) {
- status =
- amd_ec_write(smbus, AMD_SMB_DATA + i,
- data->block[i + 1]);
- if (status)
- return status;
- }
- }
- protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec;
- break;
-
- case I2C_SMBUS_I2C_BLOCK_DATA:
- len = min_t(u8, data->block[0],
- I2C_SMBUS_BLOCK_MAX);
- status = amd_ec_write(smbus, AMD_SMB_CMD, command);
- if (status)
- return status;
- status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
- if (status)
- return status;
- if (read_write == I2C_SMBUS_WRITE)
- for (i = 0; i < len; i++) {
- status =
- amd_ec_write(smbus, AMD_SMB_DATA + i,
- data->block[i + 1]);
- if (status)
- return status;
- }
- protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA;
- break;
-
- case I2C_SMBUS_PROC_CALL:
- status = amd_ec_write(smbus, AMD_SMB_CMD, command);
- if (status)
- return status;
+ case I2C_SMBUS_WORD_DATA:
+ status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ if (status)
+ return status;
+ if (read_write == I2C_SMBUS_WRITE) {
status = amd_ec_write(smbus, AMD_SMB_DATA,
- data->word & 0xff);
+ data->word & 0xff);
if (status)
return status;
status = amd_ec_write(smbus, AMD_SMB_DATA + 1,
- data->word >> 8);
+ data->word >> 8);
if (status)
return status;
- protocol = AMD_SMB_PRTCL_PROC_CALL | pec;
- read_write = I2C_SMBUS_READ;
- break;
+ }
+ protocol |= AMD_SMB_PRTCL_WORD_DATA | pec;
+ break;
- case I2C_SMBUS_BLOCK_PROC_CALL:
+ case I2C_SMBUS_BLOCK_DATA:
+ status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ if (status)
+ return status;
+ if (read_write == I2C_SMBUS_WRITE) {
len = min_t(u8, data->block[0],
- I2C_SMBUS_BLOCK_MAX - 1);
- status = amd_ec_write(smbus, AMD_SMB_CMD, command);
- if (status)
- return status;
+ I2C_SMBUS_BLOCK_MAX);
status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
if (status)
return status;
for (i = 0; i < len; i++) {
- status = amd_ec_write(smbus, AMD_SMB_DATA + i,
- data->block[i + 1]);
+ status =
+ amd_ec_write(smbus, AMD_SMB_DATA + i,
+ data->block[i + 1]);
if (status)
return status;
}
- protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec;
- read_write = I2C_SMBUS_READ;
- break;
+ }
+ protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec;
+ break;
+
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ len = min_t(u8, data->block[0],
+ I2C_SMBUS_BLOCK_MAX);
+ status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ if (status)
+ return status;
+ status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
+ if (status)
+ return status;
+ if (read_write == I2C_SMBUS_WRITE)
+ for (i = 0; i < len; i++) {
+ status =
+ amd_ec_write(smbus, AMD_SMB_DATA + i,
+ data->block[i + 1]);
+ if (status)
+ return status;
+ }
+ protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA;
+ break;
- default:
- dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
- return -EOPNOTSUPP;
+ case I2C_SMBUS_PROC_CALL:
+ status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ if (status)
+ return status;
+ status = amd_ec_write(smbus, AMD_SMB_DATA,
+ data->word & 0xff);
+ if (status)
+ return status;
+ status = amd_ec_write(smbus, AMD_SMB_DATA + 1,
+ data->word >> 8);
+ if (status)
+ return status;
+ protocol = AMD_SMB_PRTCL_PROC_CALL | pec;
+ read_write = I2C_SMBUS_READ;
+ break;
+
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ len = min_t(u8, data->block[0],
+ I2C_SMBUS_BLOCK_MAX - 1);
+ status = amd_ec_write(smbus, AMD_SMB_CMD, command);
+ if (status)
+ return status;
+ status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
+ if (status)
+ return status;
+ for (i = 0; i < len; i++) {
+ status = amd_ec_write(smbus, AMD_SMB_DATA + i,
+ data->block[i + 1]);
+ if (status)
+ return status;
+ }
+ protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec;
+ read_write = I2C_SMBUS_READ;
+ break;
+
+ default:
+ dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
+ return -EOPNOTSUPP;
}
status = amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1);
@@ -357,40 +357,40 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
return 0;
switch (size) {
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_BYTE_DATA:
- status = amd_ec_read(smbus, AMD_SMB_DATA, &data->byte);
- if (status)
- return status;
- break;
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ status = amd_ec_read(smbus, AMD_SMB_DATA, &data->byte);
+ if (status)
+ return status;
+ break;
- case I2C_SMBUS_WORD_DATA:
- case I2C_SMBUS_PROC_CALL:
- status = amd_ec_read(smbus, AMD_SMB_DATA, temp + 0);
- if (status)
- return status;
- status = amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1);
- if (status)
- return status;
- data->word = (temp[1] << 8) | temp[0];
- break;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ status = amd_ec_read(smbus, AMD_SMB_DATA, temp + 0);
+ if (status)
+ return status;
+ status = amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1);
+ if (status)
+ return status;
+ data->word = (temp[1] << 8) | temp[0];
+ break;
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_PROC_CALL:
- status = amd_ec_read(smbus, AMD_SMB_BCNT, &len);
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ status = amd_ec_read(smbus, AMD_SMB_BCNT, &len);
+ if (status)
+ return status;
+ len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+ fallthrough;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ for (i = 0; i < len; i++) {
+ status = amd_ec_read(smbus, AMD_SMB_DATA + i,
+ data->block + i + 1);
if (status)
return status;
- len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
- fallthrough;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- for (i = 0; i < len; i++) {
- status = amd_ec_read(smbus, AMD_SMB_DATA + i,
- data->block + i + 1);
- if (status)
- return status;
- }
- data->block[0] = len;
- break;
+ }
+ data->block[0] = len;
+ break;
}
return 0;
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index ba766d24219e..490ee3962645 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/version.h>
#define N_DATA_REGS 8
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index e4b7f2a951ad..c1bbc4caeb5c 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -789,7 +789,7 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
bool change_role = false;
#endif
- ret = pm_runtime_get_sync(id->dev);
+ ret = pm_runtime_resume_and_get(id->dev);
if (ret < 0)
return ret;
@@ -911,7 +911,7 @@ static int cdns_reg_slave(struct i2c_client *slave)
if (slave->flags & I2C_CLIENT_TEN)
return -EAFNOSUPPORT;
- ret = pm_runtime_get_sync(id->dev);
+ ret = pm_runtime_resume_and_get(id->dev);
if (ret < 0)
return ret;
@@ -1200,7 +1200,10 @@ static int cdns_i2c_probe(struct platform_device *pdev)
if (IS_ERR(id->membase))
return PTR_ERR(id->membase);
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+ id->irq = ret;
id->adap.owner = THIS_MODULE;
id->adap.dev.of_node = pdev->dev.of_node;
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index f80d79e973cd..08f491ea21ac 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -280,6 +280,10 @@ static const struct property_entry bq24190_props[] = {
{ }
};
+static const struct software_node bq24190_node = {
+ .properties = bq24190_props,
+};
+
static struct regulator_consumer_supply fusb302_consumer = {
.supply = "vbus",
/* Must match fusb302 dev_name in intel_cht_int33fe.c */
@@ -308,7 +312,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
.type = "bq24190",
.addr = 0x6b,
.dev_name = "bq24190",
- .properties = bq24190_props,
+ .swnode = &bq24190_node,
.platform_data = &bq24190_pdata,
};
int ret, reg, irq;
diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
new file mode 100644
index 000000000000..78cfecd1ea76
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cp2615.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * i2c support for Silicon Labs' CP2615 Digital Audio Bridge
+ *
+ * (c) 2021, Bence Csókás <bence98@sch.bme.hu>
+ */
+
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/usb.h>
+
+/** CP2615 I/O Protocol implementation */
+
+#define CP2615_VID 0x10c4
+#define CP2615_PID 0xeac1
+
+#define IOP_EP_IN 0x82
+#define IOP_EP_OUT 0x02
+#define IOP_IFN 1
+#define IOP_ALTSETTING 2
+
+#define MAX_IOP_SIZE 64
+#define MAX_IOP_PAYLOAD_SIZE (MAX_IOP_SIZE - 6)
+#define MAX_I2C_SIZE (MAX_IOP_PAYLOAD_SIZE - 4)
+
+enum cp2615_iop_msg_type {
+ iop_GetAccessoryInfo = 0xD100,
+ iop_AccessoryInfo = 0xA100,
+ iop_GetPortConfiguration = 0xD203,
+ iop_PortConfiguration = 0xA203,
+ iop_DoI2cTransfer = 0xD400,
+ iop_I2cTransferResult = 0xA400,
+ iop_GetSerialState = 0xD501,
+ iop_SerialState = 0xA501
+};
+
+struct __packed cp2615_iop_msg {
+ __be16 preamble, length, msg;
+ u8 data[MAX_IOP_PAYLOAD_SIZE];
+};
+
+#define PART_ID_A01 0x1400
+#define PART_ID_A02 0x1500
+
+struct __packed cp2615_iop_accessory_info {
+ __be16 part_id, option_id, proto_ver;
+};
+
+struct __packed cp2615_i2c_transfer {
+ u8 tag, i2caddr, read_len, write_len;
+ u8 data[MAX_I2C_SIZE];
+};
+
+/* Possible values for struct cp2615_i2c_transfer_result.status */
+enum cp2615_i2c_status {
+ /* Writing to the internal EEPROM failed, because it is locked */
+ CP2615_CFG_LOCKED = -6,
+ /* read_len or write_len out of range */
+ CP2615_INVALID_PARAM = -4,
+ /* I2C slave did not ACK in time */
+ CP2615_TIMEOUT,
+ /* I2C bus busy */
+ CP2615_BUS_BUSY,
+ /* I2C bus error (ie. device NAK'd the request) */
+ CP2615_BUS_ERROR,
+ CP2615_SUCCESS
+};
+
+struct __packed cp2615_i2c_transfer_result {
+ u8 tag, i2caddr;
+ s8 status;
+ u8 read_len;
+ u8 data[MAX_I2C_SIZE];
+};
+
+static int cp2615_init_iop_msg(struct cp2615_iop_msg *ret, enum cp2615_iop_msg_type msg,
+ const void *data, size_t data_len)
+{
+ if (data_len > MAX_IOP_PAYLOAD_SIZE)
+ return -EFBIG;
+
+ if (!ret)
+ return -EINVAL;
+
+ ret->preamble = 0x2A2A;
+ ret->length = htons(data_len + 6);
+ ret->msg = htons(msg);
+ if (data && data_len)
+ memcpy(&ret->data, data, data_len);
+ return 0;
+}
+
+static int cp2615_init_i2c_msg(struct cp2615_iop_msg *ret, const struct cp2615_i2c_transfer *data)
+{
+ return cp2615_init_iop_msg(ret, iop_DoI2cTransfer, data, 4 + data->write_len);
+}
+
+/* Translates status codes to Linux errno's */
+static int cp2615_check_status(enum cp2615_i2c_status status)
+{
+ switch (status) {
+ case CP2615_SUCCESS:
+ return 0;
+ case CP2615_BUS_ERROR:
+ return -ENXIO;
+ case CP2615_BUS_BUSY:
+ return -EAGAIN;
+ case CP2615_TIMEOUT:
+ return -ETIMEDOUT;
+ case CP2615_INVALID_PARAM:
+ return -EINVAL;
+ case CP2615_CFG_LOCKED:
+ return -EPERM;
+ }
+ /* Unknown error code */
+ return -EPROTO;
+}
+
+/** Driver code */
+
+static int
+cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
+{
+ struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+ struct usb_device *usbdev = interface_to_usbdev(usbif);
+ int res = cp2615_init_i2c_msg(msg, i2c_w);
+
+ if (!res)
+ res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
+ msg, ntohs(msg->length), NULL, 0);
+ kfree(msg);
+ return res;
+}
+
+static int
+cp2615_i2c_recv(struct usb_interface *usbif, unsigned char tag, void *buf)
+{
+ struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+ struct cp2615_i2c_transfer_result *i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
+ struct usb_device *usbdev = interface_to_usbdev(usbif);
+ int res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
+ msg, sizeof(struct cp2615_iop_msg), NULL, 0);
+
+ if (res < 0) {
+ kfree(msg);
+ return res;
+ }
+
+ if (msg->msg != htons(iop_I2cTransferResult) || i2c_r->tag != tag) {
+ kfree(msg);
+ return -EIO;
+ }
+
+ res = cp2615_check_status(i2c_r->status);
+ if (!res)
+ memcpy(buf, &i2c_r->data, i2c_r->read_len);
+
+ kfree(msg);
+ return res;
+}
+
+/* Checks if the IOP is functional by querying the part's ID */
+static int cp2615_check_iop(struct usb_interface *usbif)
+{
+ struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+ struct cp2615_iop_accessory_info *info = (struct cp2615_iop_accessory_info *)&msg->data;
+ struct usb_device *usbdev = interface_to_usbdev(usbif);
+ int res = cp2615_init_iop_msg(msg, iop_GetAccessoryInfo, NULL, 0);
+
+ if (res)
+ goto out;
+
+ res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
+ msg, ntohs(msg->length), NULL, 0);
+ if (res)
+ goto out;
+
+ res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
+ msg, sizeof(struct cp2615_iop_msg), NULL, 0);
+ if (res)
+ goto out;
+
+ if (msg->msg != htons(iop_AccessoryInfo)) {
+ res = -EIO;
+ goto out;
+ }
+
+ switch (ntohs(info->part_id)) {
+ case PART_ID_A01:
+ dev_dbg(&usbif->dev, "Found A01 part. (WARNING: errata exists!)\n");
+ break;
+ case PART_ID_A02:
+ dev_dbg(&usbif->dev, "Found good A02 part.\n");
+ break;
+ default:
+ dev_warn(&usbif->dev, "Unknown part ID %04X\n", ntohs(info->part_id));
+ }
+
+out:
+ kfree(msg);
+ return res;
+}
+
+static int
+cp2615_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct usb_interface *usbif = adap->algo_data;
+ int i = 0, ret = 0;
+ struct i2c_msg *msg;
+ struct cp2615_i2c_transfer i2c_w = {0};
+
+ dev_dbg(&usbif->dev, "Doing %d I2C transactions\n", num);
+
+ for (; !ret && i < num; i++) {
+ msg = &msgs[i];
+
+ i2c_w.tag = 0xdd;
+ i2c_w.i2caddr = i2c_8bit_addr_from_msg(msg);
+ if (msg->flags & I2C_M_RD) {
+ i2c_w.read_len = msg->len;
+ i2c_w.write_len = 0;
+ } else {
+ i2c_w.read_len = 0;
+ i2c_w.write_len = msg->len;
+ memcpy(&i2c_w.data, msg->buf, i2c_w.write_len);
+ }
+ ret = cp2615_i2c_send(usbif, &i2c_w);
+ if (ret)
+ break;
+ ret = cp2615_i2c_recv(usbif, i2c_w.tag, msg->buf);
+ }
+ if (ret < 0)
+ return ret;
+ return i;
+}
+
+static u32
+cp2615_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm cp2615_i2c_algo = {
+ .master_xfer = cp2615_i2c_master_xfer,
+ .functionality = cp2615_i2c_func,
+};
+
+/*
+ * This chip has some limitations: one is that the USB endpoint
+ * can only receive 64 bytes/transfer, that leaves 54 bytes for
+ * the I2C transfer. On top of that, EITHER read_len OR write_len
+ * may be zero, but not both. If both are non-zero, the adapter
+ * issues a write followed by a read. And the chip does not
+ * support repeated START between the write and read phases.
+ */
+static struct i2c_adapter_quirks cp2615_i2c_quirks = {
+ .max_write_len = MAX_I2C_SIZE,
+ .max_read_len = MAX_I2C_SIZE,
+ .flags = I2C_AQ_COMB_WRITE_THEN_READ | I2C_AQ_NO_ZERO_LEN | I2C_AQ_NO_REP_START,
+ .max_comb_1st_msg_len = MAX_I2C_SIZE,
+ .max_comb_2nd_msg_len = MAX_I2C_SIZE
+};
+
+static void
+cp2615_i2c_remove(struct usb_interface *usbif)
+{
+ struct i2c_adapter *adap = usb_get_intfdata(usbif);
+
+ usb_set_intfdata(usbif, NULL);
+ i2c_del_adapter(adap);
+}
+
+static int
+cp2615_i2c_probe(struct usb_interface *usbif, const struct usb_device_id *id)
+{
+ int ret = 0;
+ struct i2c_adapter *adap;
+ struct usb_device *usbdev = interface_to_usbdev(usbif);
+
+ ret = usb_set_interface(usbdev, IOP_IFN, IOP_ALTSETTING);
+ if (ret)
+ return ret;
+
+ ret = cp2615_check_iop(usbif);
+ if (ret)
+ return ret;
+
+ adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (!adap)
+ return -ENOMEM;
+
+ strncpy(adap->name, usbdev->serial, sizeof(adap->name) - 1);
+ adap->owner = THIS_MODULE;
+ adap->dev.parent = &usbif->dev;
+ adap->dev.of_node = usbif->dev.of_node;
+ adap->timeout = HZ;
+ adap->algo = &cp2615_i2c_algo;
+ adap->quirks = &cp2615_i2c_quirks;
+ adap->algo_data = usbif;
+
+ ret = i2c_add_adapter(adap);
+ if (ret)
+ return ret;
+
+ usb_set_intfdata(usbif, adap);
+ return 0;
+}
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE_INTERFACE_NUMBER(CP2615_VID, CP2615_PID, IOP_IFN) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver cp2615_i2c_driver = {
+ .name = "i2c-cp2615",
+ .probe = cp2615_i2c_probe,
+ .disconnect = cp2615_i2c_remove,
+ .id_table = id_table,
+};
+
+module_usb_driver(cp2615_i2c_driver);
+
+MODULE_AUTHOR("Bence Csókás <bence98@sch.bme.hu>");
+MODULE_DESCRIPTION("CP2615 I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 3c19aada4b30..fdc34d9e3702 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -150,6 +150,9 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev)
reg = readl(dev->base + DW_IC_COMP_TYPE);
i2c_dw_release_lock(dev);
+ if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU)
+ map_cfg.max_register = AMD_UCSI_INTR_REG;
+
if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) {
map_cfg.reg_read = dw_reg_read_swab;
map_cfg.reg_write = dw_reg_write_swab;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 5392b82f68a4..6a53f75abf7c 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -295,8 +295,16 @@ struct dw_i2c_dev {
#define MODEL_MSCC_OCELOT BIT(8)
#define MODEL_BAIKAL_BT1 BIT(9)
+#define MODEL_AMD_NAVI_GPU BIT(10)
#define MODEL_MASK GENMASK(11, 8)
+/*
+ * Enable UCSI interrupt by writing 0xd at register
+ * offset 0x474 specified in hardware specification.
+ */
+#define AMD_UCSI_INTR_REG 0x474
+#define AMD_UCSI_INTR_EN 0xd
+
int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 873ef38eb1c8..13be1d678c39 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -23,6 +23,10 @@
#include "i2c-designware-core.h"
+#define AMD_TIMEOUT_MIN_US 25
+#define AMD_TIMEOUT_MAX_US 250
+#define AMD_MASTERCFG_MASK GENMASK(15, 0)
+
static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
{
/* Configure Tx/Rx FIFO threshold levels */
@@ -35,10 +39,10 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
{
- const char *mode_str, *fp_str = "";
u32 comp_param1;
u32 sda_falling_time, scl_falling_time;
struct i2c_timings *t = &dev->timings;
+ const char *fp_str = "";
u32 ic_clk;
int ret;
@@ -78,7 +82,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
* difference is the timing parameter values since the registers are
* the same.
*/
- if (t->bus_freq_hz == 1000000) {
+ if (t->bus_freq_hz == I2C_MAX_FAST_MODE_PLUS_FREQ) {
/*
* Check are Fast Mode Plus parameters available. Calculate
* SCL timing parameters for Fast Mode Plus if not set.
@@ -154,22 +158,10 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
ret = i2c_dw_set_sda_hold(dev);
if (ret)
- goto out;
-
- switch (dev->master_cfg & DW_IC_CON_SPEED_MASK) {
- case DW_IC_CON_SPEED_STD:
- mode_str = "Standard Mode";
- break;
- case DW_IC_CON_SPEED_HIGH:
- mode_str = "High Speed Mode";
- break;
- default:
- mode_str = "Fast Mode";
- }
- dev_dbg(dev->dev, "Bus speed: %s%s\n", mode_str, fp_str);
+ return ret;
-out:
- return ret;
+ dev_dbg(dev->dev, "Bus speed: %s\n", i2c_freq_mode_string(t->bus_freq_hz));
+ return 0;
}
/**
@@ -260,6 +252,108 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
}
+static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev)
+{
+ u32 val;
+ int ret;
+
+ ret = regmap_read_poll_timeout(dev->map, DW_IC_INTR_STAT, val,
+ !(val & DW_IC_INTR_STOP_DET),
+ 1100, 20000);
+ if (ret)
+ dev_err(dev->dev, "i2c timeout error %d\n", ret);
+
+ return ret;
+}
+
+static int i2c_dw_status(struct dw_i2c_dev *dev)
+{
+ int status;
+
+ status = i2c_dw_wait_bus_not_busy(dev);
+ if (status)
+ return status;
+
+ return i2c_dw_check_stopbit(dev);
+}
+
+/*
+ * Initiate and continue master read/write transaction with polling
+ * based transfer routine afterward write messages into the Tx buffer.
+ */
+static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs, int num_msgs)
+{
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ int msg_wrt_idx, msg_itr_lmt, buf_len, data_idx;
+ int cmd = 0, status;
+ u8 *tx_buf;
+ u32 val;
+
+ /*
+ * In order to enable the interrupt for UCSI i.e. AMD NAVI GPU card,
+ * it is mandatory to set the right value in specific register
+ * (offset:0x474) as per the hardware IP specification.
+ */
+ regmap_write(dev->map, AMD_UCSI_INTR_REG, AMD_UCSI_INTR_EN);
+
+ dev->msgs = msgs;
+ dev->msgs_num = num_msgs;
+ i2c_dw_xfer_init(dev);
+ i2c_dw_disable_int(dev);
+
+ /* Initiate messages read/write transaction */
+ for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) {
+ tx_buf = msgs[msg_wrt_idx].buf;
+ buf_len = msgs[msg_wrt_idx].len;
+
+ if (!(msgs[msg_wrt_idx].flags & I2C_M_RD))
+ regmap_write(dev->map, DW_IC_TX_TL, buf_len - 1);
+ /*
+ * Initiate the i2c read/write transaction of buffer length,
+ * and poll for bus busy status. For the last message transfer,
+ * update the command with stopbit enable.
+ */
+ for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) {
+ if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1)
+ cmd |= BIT(9);
+
+ if (msgs[msg_wrt_idx].flags & I2C_M_RD) {
+ /* Due to hardware bug, need to write the same command twice. */
+ regmap_write(dev->map, DW_IC_DATA_CMD, 0x100);
+ regmap_write(dev->map, DW_IC_DATA_CMD, 0x100 | cmd);
+ if (cmd) {
+ regmap_write(dev->map, DW_IC_TX_TL, 2 * (buf_len - 1));
+ regmap_write(dev->map, DW_IC_RX_TL, 2 * (buf_len - 1));
+ /*
+ * Need to check the stop bit. However, it cannot be
+ * detected from the registers so we check it always
+ * when read/write the last byte.
+ */
+ status = i2c_dw_status(dev);
+ if (status)
+ return status;
+
+ for (data_idx = 0; data_idx < buf_len; data_idx++) {
+ regmap_read(dev->map, DW_IC_DATA_CMD, &val);
+ tx_buf[data_idx] = val;
+ }
+ status = i2c_dw_check_stopbit(dev);
+ if (status)
+ return status;
+ }
+ } else {
+ regmap_write(dev->map, DW_IC_DATA_CMD, *tx_buf++ | cmd);
+ usleep_range(AMD_TIMEOUT_MIN_US, AMD_TIMEOUT_MAX_US);
+ }
+ }
+ status = i2c_dw_check_stopbit(dev);
+ if (status)
+ return status;
+ }
+
+ return 0;
+}
+
/*
* Initiate (and continue) low level master read/write transaction.
* This function is only called from i2c_dw_isr, and pumping i2c_msg
@@ -463,6 +557,16 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
pm_runtime_get_sync(dev->dev);
+ /*
+ * Initiate I2C message transfer when AMD NAVI GPU card is enabled,
+ * As it is polling based transfer mechanism, which does not support
+ * interrupt based functionalities of existing DesignWare driver.
+ */
+ if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
+ ret = amd_i2c_dw_xfer_quirk(adap, msgs, num);
+ goto done_nolock;
+ }
+
if (dev_WARN_ONCE(dev->dev, dev->suspended, "Transfer while suspended\n")) {
ret = -ESHUTDOWN;
goto done_nolock;
@@ -739,6 +843,20 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
return 0;
}
+static int amd_i2c_adap_quirk(struct dw_i2c_dev *dev)
+{
+ struct i2c_adapter *adap = &dev->adapter;
+ int ret;
+
+ pm_runtime_get_noresume(dev->dev);
+ ret = i2c_add_numbered_adapter(adap);
+ if (ret)
+ dev_err(dev->dev, "Failed to add adapter: %d\n", ret);
+ pm_runtime_put_noidle(dev->dev);
+
+ return ret;
+}
+
int i2c_dw_probe_master(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
@@ -775,6 +893,9 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
adap->dev.parent = dev->dev;
i2c_set_adapdata(adap, dev);
+ if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU)
+ return amd_i2c_adap_quirk(dev);
+
if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
irq_flags = IRQF_NO_SUSPEND;
} else {
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 55c83a7a24f3..0f409a4c2da0 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -26,6 +26,7 @@
#include "i2c-designware-core.h"
#define DRIVER_NAME "i2c-designware-pci"
+#define AMD_CLK_RATE_HZ 100000
enum dw_pci_ctl_id_t {
medfield,
@@ -34,6 +35,7 @@ enum dw_pci_ctl_id_t {
cherrytrail,
haswell,
elkhartlake,
+ navi_amd,
};
struct dw_scl_sda_cfg {
@@ -78,11 +80,23 @@ static struct dw_scl_sda_cfg hsw_config = {
.sda_hold = 0x9,
};
+/* NAVI-AMD HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg navi_amd_config = {
+ .ss_hcnt = 0x1ae,
+ .ss_lcnt = 0x23a,
+ .sda_hold = 0x9,
+};
+
static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return 25000;
}
+static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return AMD_CLK_RATE_HZ;
+}
+
static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
@@ -104,6 +118,35 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
return -ENODEV;
}
+ /*
+ * TODO find a better way how to deduplicate instantiation
+ * of USB PD slave device from nVidia GPU driver.
+ */
+static int navi_amd_register_client(struct dw_i2c_dev *dev)
+{
+ struct i2c_board_info info;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strscpy(info.type, "ccgx-ucsi", I2C_NAME_SIZE);
+ info.addr = 0x08;
+ info.irq = dev->irq;
+
+ dev->slave = i2c_new_client_device(&dev->adapter, &info);
+ if (IS_ERR(dev->slave))
+ return PTR_ERR(dev->slave);
+
+ return 0;
+}
+
+static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+ struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
+
+ dev->flags |= MODEL_AMD_NAVI_GPU;
+ dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+ return 0;
+}
+
static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
/*
@@ -155,6 +198,12 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.bus_num = -1,
.get_clk_rate_khz = ehl_get_clk_rate_khz,
},
+ [navi_amd] = {
+ .bus_num = -1,
+ .scl_sda_cfg = &navi_amd_config,
+ .setup = navi_amd_setup,
+ .get_clk_rate_khz = navi_amd_get_clk_rate_khz,
+ },
};
#ifdef CONFIG_PM
@@ -274,6 +323,14 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
return r;
}
+ if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
+ r = navi_amd_register_client(dev);
+ if (r) {
+ dev_err(dev->dev, "register client failed with %d\n", r);
+ return r;
+ }
+ }
+
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
@@ -337,6 +394,10 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake },
+ { PCI_VDEVICE(ATI, 0x7314), navi_amd },
+ { PCI_VDEVICE(ATI, 0x73a4), navi_amd },
+ { PCI_VDEVICE(ATI, 0x73e4), navi_amd },
+ { PCI_VDEVICE(ATI, 0x73c4), navi_amd },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index a08554c1a570..bdff0e6345d9 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -395,7 +395,10 @@ static int em_i2c_probe(struct platform_device *pdev)
em_i2c_reset(&priv->adap);
- priv->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err_clk;
+ priv->irq = ret;
ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
"em_i2c", priv);
if (ret)
diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
new file mode 100644
index 000000000000..acf394812061
--- /dev/null
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * HiSilicon I2C Controller Driver for Kunpeng SoC
+ *
+ * Copyright (c) 2021 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#define HISI_I2C_FRAME_CTRL 0x0000
+#define HISI_I2C_FRAME_CTRL_SPEED_MODE GENMASK(1, 0)
+#define HISI_I2C_FRAME_CTRL_ADDR_TEN BIT(2)
+#define HISI_I2C_SLV_ADDR 0x0004
+#define HISI_I2C_SLV_ADDR_VAL GENMASK(9, 0)
+#define HISI_I2C_SLV_ADDR_GC_S_MODE BIT(10)
+#define HISI_I2C_SLV_ADDR_GC_S_EN BIT(11)
+#define HISI_I2C_CMD_TXDATA 0x0008
+#define HISI_I2C_CMD_TXDATA_DATA GENMASK(7, 0)
+#define HISI_I2C_CMD_TXDATA_RW BIT(8)
+#define HISI_I2C_CMD_TXDATA_P_EN BIT(9)
+#define HISI_I2C_CMD_TXDATA_SR_EN BIT(10)
+#define HISI_I2C_RXDATA 0x000c
+#define HISI_I2C_RXDATA_DATA GENMASK(7, 0)
+#define HISI_I2C_SS_SCL_HCNT 0x0010
+#define HISI_I2C_SS_SCL_LCNT 0x0014
+#define HISI_I2C_FS_SCL_HCNT 0x0018
+#define HISI_I2C_FS_SCL_LCNT 0x001c
+#define HISI_I2C_HS_SCL_HCNT 0x0020
+#define HISI_I2C_HS_SCL_LCNT 0x0024
+#define HISI_I2C_FIFO_CTRL 0x0028
+#define HISI_I2C_FIFO_RX_CLR BIT(0)
+#define HISI_I2C_FIFO_TX_CLR BIT(1)
+#define HISI_I2C_FIFO_RX_AF_THRESH GENMASK(7, 2)
+#define HISI_I2C_FIFO_TX_AE_THRESH GENMASK(13, 8)
+#define HISI_I2C_FIFO_STATE 0x002c
+#define HISI_I2C_FIFO_STATE_RX_RERR BIT(0)
+#define HISI_I2C_FIFO_STATE_RX_WERR BIT(1)
+#define HISI_I2C_FIFO_STATE_RX_EMPTY BIT(3)
+#define HISI_I2C_FIFO_STATE_TX_RERR BIT(6)
+#define HISI_I2C_FIFO_STATE_TX_WERR BIT(7)
+#define HISI_I2C_FIFO_STATE_TX_FULL BIT(11)
+#define HISI_I2C_SDA_HOLD 0x0030
+#define HISI_I2C_SDA_HOLD_TX GENMASK(15, 0)
+#define HISI_I2C_SDA_HOLD_RX GENMASK(23, 16)
+#define HISI_I2C_FS_SPK_LEN 0x0038
+#define HISI_I2C_FS_SPK_LEN_CNT GENMASK(7, 0)
+#define HISI_I2C_HS_SPK_LEN 0x003c
+#define HISI_I2C_HS_SPK_LEN_CNT GENMASK(7, 0)
+#define HISI_I2C_INT_MSTAT 0x0044
+#define HISI_I2C_INT_CLR 0x0048
+#define HISI_I2C_INT_MASK 0x004C
+#define HISI_I2C_TRANS_STATE 0x0050
+#define HISI_I2C_TRANS_ERR 0x0054
+#define HISI_I2C_VERSION 0x0058
+
+#define HISI_I2C_INT_ALL GENMASK(4, 0)
+#define HISI_I2C_INT_TRANS_CPLT BIT(0)
+#define HISI_I2C_INT_TRANS_ERR BIT(1)
+#define HISI_I2C_INT_FIFO_ERR BIT(2)
+#define HISI_I2C_INT_RX_FULL BIT(3)
+#define HISI_I2C_INT_TX_EMPTY BIT(4)
+#define HISI_I2C_INT_ERR \
+ (HISI_I2C_INT_TRANS_ERR | HISI_I2C_INT_FIFO_ERR)
+
+#define HISI_I2C_STD_SPEED_MODE 0
+#define HISI_I2C_FAST_SPEED_MODE 1
+#define HISI_I2C_HIGH_SPEED_MODE 2
+
+#define HISI_I2C_TX_FIFO_DEPTH 64
+#define HISI_I2C_RX_FIFO_DEPTH 64
+#define HISI_I2C_TX_F_AE_THRESH 1
+#define HISI_I2C_RX_F_AF_THRESH 60
+
+#define HZ_PER_KHZ 1000
+
+#define NSEC_TO_CYCLES(ns, clk_rate_khz) \
+ DIV_ROUND_UP_ULL((clk_rate_khz) * (ns), NSEC_PER_MSEC)
+
+struct hisi_i2c_controller {
+ struct i2c_adapter adapter;
+ void __iomem *iobase;
+ struct device *dev;
+ int irq;
+
+ /* Intermediates for recording the transfer process */
+ struct completion *completion;
+ struct i2c_msg *msgs;
+ int msg_num;
+ int msg_tx_idx;
+ int buf_tx_idx;
+ int msg_rx_idx;
+ int buf_rx_idx;
+ u16 tar_addr;
+ u32 xfer_err;
+
+ /* I2C bus configuration */
+ struct i2c_timings t;
+ u32 clk_rate_khz;
+ u32 spk_len;
+};
+
+static void hisi_i2c_enable_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+ writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_MASK);
+}
+
+static void hisi_i2c_disable_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+ writel_relaxed((~mask) & HISI_I2C_INT_ALL, ctlr->iobase + HISI_I2C_INT_MASK);
+}
+
+static void hisi_i2c_clear_int(struct hisi_i2c_controller *ctlr, u32 mask)
+{
+ writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_CLR);
+}
+
+static void hisi_i2c_handle_errors(struct hisi_i2c_controller *ctlr)
+{
+ u32 int_err = ctlr->xfer_err, reg;
+
+ if (int_err & HISI_I2C_INT_FIFO_ERR) {
+ reg = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+
+ if (reg & HISI_I2C_FIFO_STATE_RX_RERR)
+ dev_err(ctlr->dev, "rx fifo error read\n");
+
+ if (reg & HISI_I2C_FIFO_STATE_RX_WERR)
+ dev_err(ctlr->dev, "rx fifo error write\n");
+
+ if (reg & HISI_I2C_FIFO_STATE_TX_RERR)
+ dev_err(ctlr->dev, "tx fifo error read\n");
+
+ if (reg & HISI_I2C_FIFO_STATE_TX_WERR)
+ dev_err(ctlr->dev, "tx fifo error write\n");
+ }
+}
+
+static int hisi_i2c_start_xfer(struct hisi_i2c_controller *ctlr)
+{
+ struct i2c_msg *msg = ctlr->msgs;
+ u32 reg;
+
+ reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
+ reg &= ~HISI_I2C_FRAME_CTRL_ADDR_TEN;
+ if (msg->flags & I2C_M_TEN)
+ reg |= HISI_I2C_FRAME_CTRL_ADDR_TEN;
+ writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
+
+ reg = readl(ctlr->iobase + HISI_I2C_SLV_ADDR);
+ reg &= ~HISI_I2C_SLV_ADDR_VAL;
+ reg |= FIELD_PREP(HISI_I2C_SLV_ADDR_VAL, msg->addr);
+ writel(reg, ctlr->iobase + HISI_I2C_SLV_ADDR);
+
+ reg = readl(ctlr->iobase + HISI_I2C_FIFO_CTRL);
+ reg |= HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR;
+ writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+ reg &= ~(HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR);
+ writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+
+ hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+ hisi_i2c_enable_int(ctlr, HISI_I2C_INT_ALL);
+
+ return 0;
+}
+
+static void hisi_i2c_reset_xfer(struct hisi_i2c_controller *ctlr)
+{
+ ctlr->msg_num = 0;
+ ctlr->xfer_err = 0;
+ ctlr->msg_tx_idx = 0;
+ ctlr->msg_rx_idx = 0;
+ ctlr->buf_tx_idx = 0;
+ ctlr->buf_rx_idx = 0;
+}
+
+/*
+ * Initialize the transfer information and start the I2C bus transfer.
+ * We only configure the transfer and do some pre/post works here, and
+ * wait for the transfer done. The major transfer process is performed
+ * in the IRQ handler.
+ */
+static int hisi_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ struct hisi_i2c_controller *ctlr = i2c_get_adapdata(adap);
+ DECLARE_COMPLETION_ONSTACK(done);
+ int ret = num;
+
+ hisi_i2c_reset_xfer(ctlr);
+ ctlr->completion = &done;
+ ctlr->msg_num = num;
+ ctlr->msgs = msgs;
+
+ hisi_i2c_start_xfer(ctlr);
+
+ if (!wait_for_completion_timeout(ctlr->completion, adap->timeout)) {
+ hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+ synchronize_irq(ctlr->irq);
+ i2c_recover_bus(&ctlr->adapter);
+ dev_err(ctlr->dev, "bus transfer timeout\n");
+ ret = -EIO;
+ }
+
+ if (ctlr->xfer_err) {
+ hisi_i2c_handle_errors(ctlr);
+ ret = -EIO;
+ }
+
+ hisi_i2c_reset_xfer(ctlr);
+ ctlr->completion = NULL;
+
+ return ret;
+}
+
+static u32 hisi_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm hisi_i2c_algo = {
+ .master_xfer = hisi_i2c_master_xfer,
+ .functionality = hisi_i2c_functionality,
+};
+
+static int hisi_i2c_read_rx_fifo(struct hisi_i2c_controller *ctlr)
+{
+ struct i2c_msg *cur_msg;
+ u32 fifo_state;
+
+ while (ctlr->msg_rx_idx < ctlr->msg_num) {
+ cur_msg = ctlr->msgs + ctlr->msg_rx_idx;
+
+ if (!(cur_msg->flags & I2C_M_RD)) {
+ ctlr->msg_rx_idx++;
+ continue;
+ }
+
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ while (!(fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY) &&
+ ctlr->buf_rx_idx < cur_msg->len) {
+ cur_msg->buf[ctlr->buf_rx_idx++] = readl(ctlr->iobase + HISI_I2C_RXDATA);
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ }
+
+ if (ctlr->buf_rx_idx == cur_msg->len) {
+ ctlr->buf_rx_idx = 0;
+ ctlr->msg_rx_idx++;
+ }
+
+ if (fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY)
+ break;
+ }
+
+ return 0;
+}
+
+static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
+{
+ int max_write = HISI_I2C_TX_FIFO_DEPTH;
+ bool need_restart = false, last_msg;
+ struct i2c_msg *cur_msg;
+ u32 cmd, fifo_state;
+
+ while (ctlr->msg_tx_idx < ctlr->msg_num) {
+ cur_msg = ctlr->msgs + ctlr->msg_tx_idx;
+ last_msg = (ctlr->msg_tx_idx == ctlr->msg_num - 1);
+
+ /* Signal the SR bit when we start transferring a new message */
+ if (ctlr->msg_tx_idx && !ctlr->buf_tx_idx)
+ need_restart = true;
+
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ while (!(fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) &&
+ ctlr->buf_tx_idx < cur_msg->len && max_write) {
+ cmd = 0;
+
+ if (need_restart) {
+ cmd |= HISI_I2C_CMD_TXDATA_SR_EN;
+ need_restart = false;
+ }
+
+ /* Signal the STOP bit at the last frame of the last message */
+ if (ctlr->buf_tx_idx == cur_msg->len - 1 && last_msg)
+ cmd |= HISI_I2C_CMD_TXDATA_P_EN;
+
+ if (cur_msg->flags & I2C_M_RD)
+ cmd |= HISI_I2C_CMD_TXDATA_RW;
+ else
+ cmd |= FIELD_PREP(HISI_I2C_CMD_TXDATA_DATA,
+ cur_msg->buf[ctlr->buf_tx_idx]);
+
+ writel(cmd, ctlr->iobase + HISI_I2C_CMD_TXDATA);
+ ctlr->buf_tx_idx++;
+ max_write--;
+
+ fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
+ }
+
+ /* Update the transfer index after per message transfer is done. */
+ if (ctlr->buf_tx_idx == cur_msg->len) {
+ ctlr->buf_tx_idx = 0;
+ ctlr->msg_tx_idx++;
+ }
+
+ if ((fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) ||
+ max_write == 0)
+ break;
+ }
+}
+
+static irqreturn_t hisi_i2c_irq(int irq, void *context)
+{
+ struct hisi_i2c_controller *ctlr = context;
+ u32 int_stat;
+
+ int_stat = readl(ctlr->iobase + HISI_I2C_INT_MSTAT);
+ hisi_i2c_clear_int(ctlr, int_stat);
+ if (!(int_stat & HISI_I2C_INT_ALL))
+ return IRQ_NONE;
+
+ if (int_stat & HISI_I2C_INT_TX_EMPTY)
+ hisi_i2c_xfer_msg(ctlr);
+
+ if (int_stat & HISI_I2C_INT_ERR) {
+ ctlr->xfer_err = int_stat;
+ goto out;
+ }
+
+ /* Drain the rx fifo before finish the transfer */
+ if (int_stat & (HISI_I2C_INT_TRANS_CPLT | HISI_I2C_INT_RX_FULL))
+ hisi_i2c_read_rx_fifo(ctlr);
+
+out:
+ if (int_stat & HISI_I2C_INT_TRANS_CPLT || ctlr->xfer_err) {
+ hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+ hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
+ complete(ctlr->completion);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Helper function for calculating and configuring the HIGH and LOW
+ * periods of SCL clock. The caller will pass the ratio of the
+ * counts (divide / divisor) according to the target speed mode,
+ * and the target registers.
+ */
+static void hisi_i2c_set_scl(struct hisi_i2c_controller *ctlr,
+ u32 divide, u32 divisor,
+ u32 reg_hcnt, u32 reg_lcnt)
+{
+ u32 total_cnt, t_scl_hcnt, t_scl_lcnt, scl_fall_cnt, scl_rise_cnt;
+ u32 scl_hcnt, scl_lcnt;
+
+ /* Total SCL clock cycles per speed period */
+ total_cnt = DIV_ROUND_UP_ULL(ctlr->clk_rate_khz * HZ_PER_KHZ, ctlr->t.bus_freq_hz);
+ /* Total HIGH level SCL clock cycles including edges */
+ t_scl_hcnt = DIV_ROUND_UP_ULL(total_cnt * divide, divisor);
+ /* Total LOW level SCL clock cycles including edges */
+ t_scl_lcnt = total_cnt - t_scl_hcnt;
+ /* Fall edge SCL clock cycles */
+ scl_fall_cnt = NSEC_TO_CYCLES(ctlr->t.scl_fall_ns, ctlr->clk_rate_khz);
+ /* Rise edge SCL clock cycles */
+ scl_rise_cnt = NSEC_TO_CYCLES(ctlr->t.scl_rise_ns, ctlr->clk_rate_khz);
+
+ /* Calculated HIGH and LOW periods of SCL clock */
+ scl_hcnt = t_scl_hcnt - ctlr->spk_len - 7 - scl_fall_cnt;
+ scl_lcnt = t_scl_lcnt - 1 - scl_rise_cnt;
+
+ writel(scl_hcnt, ctlr->iobase + reg_hcnt);
+ writel(scl_lcnt, ctlr->iobase + reg_lcnt);
+}
+
+static void hisi_i2c_configure_bus(struct hisi_i2c_controller *ctlr)
+{
+ u32 reg, sda_hold_cnt, speed_mode;
+
+ i2c_parse_fw_timings(ctlr->dev, &ctlr->t, true);
+ ctlr->spk_len = NSEC_TO_CYCLES(ctlr->t.digital_filter_width_ns, ctlr->clk_rate_khz);
+
+ switch (ctlr->t.bus_freq_hz) {
+ case I2C_MAX_FAST_MODE_FREQ:
+ speed_mode = HISI_I2C_FAST_SPEED_MODE;
+ hisi_i2c_set_scl(ctlr, 26, 76, HISI_I2C_FS_SCL_HCNT, HISI_I2C_FS_SCL_LCNT);
+ break;
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
+ speed_mode = HISI_I2C_HIGH_SPEED_MODE;
+ hisi_i2c_set_scl(ctlr, 6, 22, HISI_I2C_HS_SCL_HCNT, HISI_I2C_HS_SCL_LCNT);
+ break;
+ case I2C_MAX_STANDARD_MODE_FREQ:
+ default:
+ speed_mode = HISI_I2C_STD_SPEED_MODE;
+
+ /* For default condition force the bus speed to standard mode. */
+ ctlr->t.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
+ hisi_i2c_set_scl(ctlr, 40, 87, HISI_I2C_SS_SCL_HCNT, HISI_I2C_SS_SCL_LCNT);
+ break;
+ }
+
+ reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
+ reg &= ~HISI_I2C_FRAME_CTRL_SPEED_MODE;
+ reg |= FIELD_PREP(HISI_I2C_FRAME_CTRL_SPEED_MODE, speed_mode);
+ writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
+
+ sda_hold_cnt = NSEC_TO_CYCLES(ctlr->t.sda_hold_ns, ctlr->clk_rate_khz);
+
+ reg = FIELD_PREP(HISI_I2C_SDA_HOLD_TX, sda_hold_cnt);
+ writel(reg, ctlr->iobase + HISI_I2C_SDA_HOLD);
+
+ writel(ctlr->spk_len, ctlr->iobase + HISI_I2C_FS_SPK_LEN);
+
+ reg = FIELD_PREP(HISI_I2C_FIFO_RX_AF_THRESH, HISI_I2C_RX_F_AF_THRESH);
+ reg |= FIELD_PREP(HISI_I2C_FIFO_TX_AE_THRESH, HISI_I2C_TX_F_AE_THRESH);
+ writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
+}
+
+static int hisi_i2c_probe(struct platform_device *pdev)
+{
+ struct hisi_i2c_controller *ctlr;
+ struct device *dev = &pdev->dev;
+ struct i2c_adapter *adapter;
+ u64 clk_rate_hz;
+ u32 hw_version;
+ int ret;
+
+ ctlr = devm_kzalloc(dev, sizeof(*ctlr), GFP_KERNEL);
+ if (!ctlr)
+ return -ENOMEM;
+
+ ctlr->iobase = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ctlr->iobase))
+ return PTR_ERR(ctlr->iobase);
+
+ ctlr->irq = platform_get_irq(pdev, 0);
+ if (ctlr->irq < 0)
+ return ctlr->irq;
+
+ ctlr->dev = dev;
+
+ hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
+
+ ret = devm_request_irq(dev, ctlr->irq, hisi_i2c_irq, 0, "hisi-i2c", ctlr);
+ if (ret) {
+ dev_err(dev, "failed to request irq handler, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = device_property_read_u64(dev, "clk_rate", &clk_rate_hz);
+ if (ret) {
+ dev_err(dev, "failed to get clock frequency, ret = %d\n", ret);
+ return ret;
+ }
+
+ ctlr->clk_rate_khz = DIV_ROUND_UP_ULL(clk_rate_hz, HZ_PER_KHZ);
+
+ hisi_i2c_configure_bus(ctlr);
+
+ adapter = &ctlr->adapter;
+ snprintf(adapter->name, sizeof(adapter->name),
+ "HiSilicon I2C Controller %s", dev_name(dev));
+ adapter->owner = THIS_MODULE;
+ adapter->algo = &hisi_i2c_algo;
+ adapter->dev.parent = dev;
+ i2c_set_adapdata(adapter, ctlr);
+
+ ret = devm_i2c_add_adapter(dev, adapter);
+ if (ret)
+ return ret;
+
+ hw_version = readl(ctlr->iobase + HISI_I2C_VERSION);
+ dev_info(ctlr->dev, "speed mode is %s. hw version 0x%x\n",
+ i2c_freq_mode_string(ctlr->t.bus_freq_hz), hw_version);
+
+ return 0;
+}
+
+static const struct acpi_device_id hisi_i2c_acpi_ids[] = {
+ { "HISI03D1", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, hisi_i2c_acpi_ids);
+
+static struct platform_driver hisi_i2c_driver = {
+ .probe = hisi_i2c_probe,
+ .driver = {
+ .name = "hisi-i2c",
+ .acpi_match_table = hisi_i2c_acpi_ids,
+ },
+};
+module_platform_driver(hisi_i2c_driver);
+
+MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>");
+MODULE_DESCRIPTION("HiSilicon I2C Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4acee6f9e5a3..99d446763530 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -73,6 +73,7 @@
* Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes
* Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes
* Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes
+ * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -230,6 +231,7 @@
#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23
#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
@@ -1087,6 +1089,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS) },
{ 0, }
};
@@ -1771,6 +1774,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS:
case PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS:
+ case PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS:
priv->features |= FEATURE_BLOCK_PROC;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
diff --git a/drivers/i2c/busses/i2c-icy.c b/drivers/i2c/busses/i2c-icy.c
index 66c9923fc766..c8c422e9dda4 100644
--- a/drivers/i2c/busses/i2c-icy.c
+++ b/drivers/i2c/busses/i2c-icy.c
@@ -54,7 +54,6 @@ struct icy_i2c {
void __iomem *reg_s0;
void __iomem *reg_s1;
- struct fwnode_handle *ltc2990_fwnode;
struct i2c_client *ltc2990_client;
};
@@ -115,6 +114,10 @@ static const struct property_entry icy_ltc2990_props[] = {
{ }
};
+static const struct software_node icy_ltc2990_node = {
+ .properties = icy_ltc2990_props,
+};
+
static int icy_probe(struct zorro_dev *z,
const struct zorro_device_id *ent)
{
@@ -123,6 +126,7 @@ static int icy_probe(struct zorro_dev *z,
struct fwnode_handle *new_fwnode;
struct i2c_board_info ltc2990_info = {
.type = "ltc2990",
+ .swnode = &icy_ltc2990_node,
};
i2c = devm_kzalloc(&z->dev, sizeof(*i2c), GFP_KERNEL);
@@ -174,26 +178,10 @@ static int icy_probe(struct zorro_dev *z,
*
* See property_entry above for in1, in2, temp3.
*/
- new_fwnode = fwnode_create_software_node(icy_ltc2990_props, NULL);
- if (IS_ERR(new_fwnode)) {
- dev_info(&z->dev, "Failed to create fwnode for LTC2990, error: %ld\n",
- PTR_ERR(new_fwnode));
- } else {
- /*
- * Store the fwnode so we can destroy it on .remove().
- * Only store it on success, as fwnode_remove_software_node()
- * is NULL safe, but not PTR_ERR safe.
- */
- i2c->ltc2990_fwnode = new_fwnode;
- ltc2990_info.fwnode = new_fwnode;
-
- i2c->ltc2990_client =
- i2c_new_scanned_device(&i2c->adapter,
- &ltc2990_info,
- icy_ltc2990_addresses,
- NULL);
- }
-
+ i2c->ltc2990_client = i2c_new_scanned_device(&i2c->adapter,
+ &ltc2990_info,
+ icy_ltc2990_addresses,
+ NULL);
return 0;
}
@@ -202,8 +190,6 @@ static void icy_remove(struct zorro_dev *z)
struct icy_i2c *i2c = dev_get_drvdata(&z->dev);
i2c_unregister_device(i2c->ltc2990_client);
- fwnode_remove_software_node(i2c->ltc2990_fwnode);
-
i2c_del_adapter(&i2c->adapter);
}
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 98a89301ed2a..8e987945ed45 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1057,7 +1057,7 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
atomic = true;
}
- ret = pm_runtime_get_sync(adap->dev.parent);
+ ret = pm_runtime_resume_and_get(adap->dev.parent);
if (ret < 0)
return ret;
@@ -1158,7 +1158,7 @@ static int img_i2c_init(struct img_i2c *i2c)
u32 rev;
int ret;
- ret = pm_runtime_get_sync(i2c->adap.dev.parent);
+ ret = pm_runtime_resume_and_get(i2c->adap.dev.parent);
if (ret < 0)
return ret;
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 9db6ccded5e9..8b9ba055c418 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -259,7 +259,7 @@ static int lpi2c_imx_master_enable(struct lpi2c_imx_struct *lpi2c_imx)
unsigned int temp;
int ret;
- ret = pm_runtime_get_sync(lpi2c_imx->adapter.dev.parent);
+ ret = pm_runtime_resume_and_get(lpi2c_imx->adapter.dev.parent);
if (ret < 0)
return ret;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index b80fdc1f0092..dc5ca71906db 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -801,7 +801,7 @@ static int i2c_imx_reg_slave(struct i2c_client *client)
i2c_imx->last_slave_event = I2C_SLAVE_STOP;
/* Resume */
- ret = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
+ ret = pm_runtime_resume_and_get(i2c_imx->adapter.dev.parent);
if (ret < 0) {
dev_err(&i2c_imx->adapter.dev, "failed to resume i2c controller");
return ret;
@@ -1253,7 +1253,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter);
int result;
- result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
+ result = pm_runtime_resume_and_get(i2c_imx->adapter.dev.parent);
if (result < 0)
return result;
@@ -1496,7 +1496,7 @@ static int i2c_imx_remove(struct platform_device *pdev)
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
int irq, ret;
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0)
return ret;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 2f8b8050a223..cfecaf18ccbb 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -125,10 +125,12 @@ iop3xx_i2c_error(u32 sr)
int rc = 0;
if ((sr & IOP3XX_ISR_BERRD)) {
- if ( !rc ) rc = -I2C_ERR_BERR;
+ if (!rc)
+ rc = -I2C_ERR_BERR;
}
if ((sr & IOP3XX_ISR_ALD)) {
- if ( !rc ) rc = -I2C_ERR_ALD;
+ if (!rc)
+ rc = -I2C_ERR_ALD;
}
return rc;
}
@@ -151,12 +153,12 @@ iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
* sleep until interrupted, then recover and analyse the SR
* saved by handler
*/
-typedef int (* compare_func)(unsigned test, unsigned mask);
+typedef int (*compare_func)(unsigned test, unsigned mask);
/* returns 1 on correct comparison */
static int
iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
- unsigned flags, unsigned* status,
+ unsigned flags, unsigned *status,
compare_func compare)
{
unsigned sr = 0;
@@ -167,7 +169,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
do {
interrupted = wait_event_interruptible_timeout (
iop3xx_adap->waitq,
- (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
+ (done = compare(sr = iop3xx_i2c_get_srstat(iop3xx_adap), flags)),
1 * HZ
);
if ((rc = iop3xx_i2c_error(sr)) < 0) {
@@ -177,7 +179,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
*status = sr;
return -ETIMEDOUT;
}
- } while(!done);
+ } while (!done);
*status = sr;
@@ -204,7 +206,7 @@ iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
return iop3xx_i2c_wait_event(
iop3xx_adap,
- IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
+ IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
status, any_bits_set);
}
@@ -226,7 +228,7 @@ iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
static int
iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
- struct i2c_msg* msg)
+ struct i2c_msg *msg)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
int status;
@@ -273,7 +275,7 @@ iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
}
static int
-iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
+iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char *byte,
int stop)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -305,7 +307,7 @@ iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
int rc = 0;
for (ii = 0; rc == 0 && ii != count; ++ii)
- rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
+ rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii == count-1);
return rc;
}
@@ -317,7 +319,7 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
int rc = 0;
for (ii = 0; rc == 0 && ii != count; ++ii)
- rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
+ rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii == count-1);
return rc;
}
@@ -330,7 +332,7 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
* condition.
*/
static int
-iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
+iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg *pmsg)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
int rc;
@@ -369,7 +371,7 @@ iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
iop3xx_i2c_transaction_cleanup(iop3xx_adap);
- if(ret)
+ if (ret)
return ret;
return im;
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index 55177eb21d7b..baa7319eee53 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -825,7 +825,10 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
- i2c->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err;
+ i2c->irq = ret;
ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
dev_name(&pdev->dev), i2c);
if (ret)
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
index 2fb0532d8a16..8716032f030a 100644
--- a/drivers/i2c/busses/i2c-mlxbf.c
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -172,12 +172,6 @@
#define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF 0x14
#define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT 0x18
-enum {
- MLXBF_I2C_TIMING_100KHZ = 100000,
- MLXBF_I2C_TIMING_400KHZ = 400000,
- MLXBF_I2C_TIMING_1000KHZ = 1000000,
-};
-
/*
* Defines SMBus operating frequency and core clock frequency.
* According to ADB files, default values are compliant to 100KHz SMBus
@@ -1202,7 +1196,7 @@ static int mlxbf_i2c_init_timings(struct platform_device *pdev,
ret = device_property_read_u32(dev, "clock-frequency", &config_khz);
if (ret < 0)
- config_khz = MLXBF_I2C_TIMING_100KHZ;
+ config_khz = I2C_MAX_STANDARD_MODE_FREQ;
switch (config_khz) {
default:
@@ -1210,15 +1204,15 @@ static int mlxbf_i2c_init_timings(struct platform_device *pdev,
pr_warn("Illegal value %d: defaulting to 100 KHz\n",
config_khz);
fallthrough;
- case MLXBF_I2C_TIMING_100KHZ:
+ case I2C_MAX_STANDARD_MODE_FREQ:
config_idx = MLXBF_I2C_TIMING_CONFIG_100KHZ;
break;
- case MLXBF_I2C_TIMING_400KHZ:
+ case I2C_MAX_FAST_MODE_FREQ:
config_idx = MLXBF_I2C_TIMING_CONFIG_400KHZ;
break;
- case MLXBF_I2C_TIMING_1000KHZ:
+ case I2C_MAX_FAST_MODE_PLUS_FREQ:
config_idx = MLXBF_I2C_TIMING_CONFIG_1000KHZ;
break;
}
@@ -2376,6 +2370,8 @@ static int mlxbf_i2c_probe(struct platform_device *pdev)
mlxbf_i2c_init_slave(pdev, priv);
irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
ret = devm_request_irq(dev, irq, mlxbf_smbus_irq,
IRQF_ONESHOT | IRQF_SHARED | IRQF_PROBE_SHARED,
dev_name(dev), priv);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index d94f05c8b8b7..30d9e89a3db2 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -1,16 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * (C) Copyright 2003-2004
- * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
-
* This is a combined i2c adapter and algorithm driver for the
* MPC107/Tsi107 PowerPC northbridge and processors that include
* the same I2C unit (8240, 8245, 85xx).
*
- * Release 0.8
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * Copyright (C) 2003-2004 Humboldt Solutions Ltd, adrian@humboldt.co.uk
+ * Copyright (C) 2021 Allied Telesis Labs
*/
#include <linux/kernel.h>
@@ -19,6 +14,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/clk.h>
@@ -58,18 +54,50 @@
#define CSR_MIF 0x02
#define CSR_RXAK 0x01
+enum mpc_i2c_action {
+ MPC_I2C_ACTION_START = 1,
+ MPC_I2C_ACTION_RESTART,
+ MPC_I2C_ACTION_READ_BEGIN,
+ MPC_I2C_ACTION_READ_BYTE,
+ MPC_I2C_ACTION_WRITE,
+ MPC_I2C_ACTION_STOP,
+
+ __MPC_I2C_ACTION_CNT
+};
+
+static const char * const action_str[] = {
+ "invalid",
+ "start",
+ "restart",
+ "read begin",
+ "read",
+ "write",
+ "stop",
+};
+
+static_assert(ARRAY_SIZE(action_str) == __MPC_I2C_ACTION_CNT);
+
struct mpc_i2c {
struct device *dev;
void __iomem *base;
u32 interrupt;
- wait_queue_head_t queue;
+ wait_queue_head_t waitq;
+ spinlock_t lock;
struct i2c_adapter adap;
int irq;
u32 real_clk;
-#ifdef CONFIG_PM_SLEEP
u8 fdr, dfsrr;
-#endif
struct clk *clk_per;
+ u32 cntl_bits;
+ enum mpc_i2c_action action;
+ struct i2c_msg *msgs;
+ int num_msgs;
+ int curr_msg;
+ u32 byte_posn;
+ u32 block;
+ int rc;
+ int expect_rxack;
+
};
struct mpc_i2c_divider {
@@ -86,19 +114,6 @@ static inline void writeccr(struct mpc_i2c *i2c, u32 x)
writeb(x, i2c->base + MPC_I2C_CR);
}
-static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
-{
- struct mpc_i2c *i2c = dev_id;
- if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
- /* Read again to allow register to stabilise */
- i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
- writeb(0, i2c->base + MPC_I2C_SR);
- wake_up(&i2c->queue);
- return IRQ_HANDLED;
- }
- return IRQ_NONE;
-}
-
/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
* the bus, because it wants to send ACK.
* Following sequence of enabling/disabling and sending start/stop generates
@@ -121,61 +136,6 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c)
}
}
-static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
-{
- unsigned long orig_jiffies = jiffies;
- u32 cmd_err;
- int result = 0;
-
- if (!i2c->irq) {
- while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
- schedule();
- if (time_after(jiffies, orig_jiffies + timeout)) {
- dev_dbg(i2c->dev, "timeout\n");
- writeccr(i2c, 0);
- result = -ETIMEDOUT;
- break;
- }
- }
- cmd_err = readb(i2c->base + MPC_I2C_SR);
- writeb(0, i2c->base + MPC_I2C_SR);
- } else {
- /* Interrupt mode */
- result = wait_event_timeout(i2c->queue,
- (i2c->interrupt & CSR_MIF), timeout);
-
- if (unlikely(!(i2c->interrupt & CSR_MIF))) {
- dev_dbg(i2c->dev, "wait timeout\n");
- writeccr(i2c, 0);
- result = -ETIMEDOUT;
- }
-
- cmd_err = i2c->interrupt;
- i2c->interrupt = 0;
- }
-
- if (result < 0)
- return result;
-
- if (!(cmd_err & CSR_MCF)) {
- dev_dbg(i2c->dev, "unfinished\n");
- return -EIO;
- }
-
- if (cmd_err & CSR_MAL) {
- dev_dbg(i2c->dev, "MAL\n");
- return -EAGAIN;
- }
-
- if (writing && (cmd_err & CSR_RXAK)) {
- dev_dbg(i2c->dev, "No RXAK\n");
- /* generate stop */
- writeccr(i2c, CCR_MEN);
- return -ENXIO;
- }
- return 0;
-}
-
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
@@ -415,7 +375,7 @@ static int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
}
*real_clk = fsl_get_sys_freq() / prescaler / div->divider;
- return div ? (int)div->fdr : -EINVAL;
+ return (int)div->fdr;
}
static void mpc_i2c_setup_8xxx(struct device_node *node,
@@ -450,168 +410,209 @@ static void mpc_i2c_setup_8xxx(struct device_node *node,
}
#endif /* CONFIG_FSL_SOC */
-static void mpc_i2c_start(struct mpc_i2c *i2c)
+static void mpc_i2c_finish(struct mpc_i2c *i2c, int rc)
{
- /* Clear arbitration */
- writeb(0, i2c->base + MPC_I2C_SR);
- /* Start with MEN */
- writeccr(i2c, CCR_MEN);
+ i2c->rc = rc;
+ i2c->block = 0;
+ i2c->cntl_bits = CCR_MEN;
+ writeccr(i2c, i2c->cntl_bits);
+ wake_up(&i2c->waitq);
}
-static void mpc_i2c_stop(struct mpc_i2c *i2c)
+static void mpc_i2c_do_action(struct mpc_i2c *i2c)
{
- writeccr(i2c, CCR_MEN);
-}
+ struct i2c_msg *msg = &i2c->msgs[i2c->curr_msg];
+ int dir = 0;
+ int recv_len = 0;
+ u8 byte;
+
+ dev_dbg(i2c->dev, "action = %s\n", action_str[i2c->action]);
+
+ i2c->cntl_bits &= ~(CCR_RSTA | CCR_MTX | CCR_TXAK);
+
+ if (msg->flags & I2C_M_RD)
+ dir = 1;
+ if (msg->flags & I2C_M_RECV_LEN)
+ recv_len = 1;
+
+ switch (i2c->action) {
+ case MPC_I2C_ACTION_RESTART:
+ i2c->cntl_bits |= CCR_RSTA;
+ fallthrough;
+
+ case MPC_I2C_ACTION_START:
+ i2c->cntl_bits |= CCR_MSTA | CCR_MTX;
+ writeccr(i2c, i2c->cntl_bits);
+ writeb((msg->addr << 1) | dir, i2c->base + MPC_I2C_DR);
+ i2c->expect_rxack = 1;
+ i2c->action = dir ? MPC_I2C_ACTION_READ_BEGIN : MPC_I2C_ACTION_WRITE;
+ break;
+
+ case MPC_I2C_ACTION_READ_BEGIN:
+ if (msg->len) {
+ if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
+ i2c->cntl_bits |= CCR_TXAK;
+
+ writeccr(i2c, i2c->cntl_bits);
+ /* Dummy read */
+ readb(i2c->base + MPC_I2C_DR);
+ }
+ i2c->action = MPC_I2C_ACTION_READ_BYTE;
+ break;
+
+ case MPC_I2C_ACTION_READ_BYTE:
+ if (i2c->byte_posn || !recv_len) {
+ /* Generate Tx ACK on next to last byte */
+ if (i2c->byte_posn == msg->len - 2)
+ i2c->cntl_bits |= CCR_TXAK;
+ /* Do not generate stop on last byte */
+ if (i2c->byte_posn == msg->len - 1)
+ i2c->cntl_bits |= CCR_MTX;
-static int mpc_write(struct mpc_i2c *i2c, int target,
- const u8 *data, int length, int restart)
-{
- int i, result;
- unsigned timeout = i2c->adap.timeout;
- u32 flags = restart ? CCR_RSTA : 0;
+ writeccr(i2c, i2c->cntl_bits);
+ }
- /* Start as master */
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
- /* Write target byte */
- writeb((target << 1), i2c->base + MPC_I2C_DR);
+ byte = readb(i2c->base + MPC_I2C_DR);
- result = i2c_wait(i2c, timeout, 1);
- if (result < 0)
- return result;
+ if (i2c->byte_posn == 0 && recv_len) {
+ if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) {
+ mpc_i2c_finish(i2c, -EPROTO);
+ return;
+ }
+ msg->len += byte;
+ /*
+ * For block reads, generate Tx ACK here if data length
+ * is 1 byte (total length is 2 bytes).
+ */
+ if (msg->len == 2) {
+ i2c->cntl_bits |= CCR_TXAK;
+ writeccr(i2c, i2c->cntl_bits);
+ }
+ }
+
+ dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action], byte);
+ msg->buf[i2c->byte_posn++] = byte;
+ break;
+
+ case MPC_I2C_ACTION_WRITE:
+ dev_dbg(i2c->dev, "%s %02x\n", action_str[i2c->action],
+ msg->buf[i2c->byte_posn]);
+ writeb(msg->buf[i2c->byte_posn++], i2c->base + MPC_I2C_DR);
+ i2c->expect_rxack = 1;
+ break;
- for (i = 0; i < length; i++) {
- /* Write data byte */
- writeb(data[i], i2c->base + MPC_I2C_DR);
+ case MPC_I2C_ACTION_STOP:
+ mpc_i2c_finish(i2c, 0);
+ break;
- result = i2c_wait(i2c, timeout, 1);
- if (result < 0)
- return result;
+ default:
+ WARN(1, "Unexpected action %d\n", i2c->action);
+ break;
}
- return 0;
+ if (msg->len == i2c->byte_posn) {
+ i2c->curr_msg++;
+ i2c->byte_posn = 0;
+
+ if (i2c->curr_msg == i2c->num_msgs) {
+ i2c->action = MPC_I2C_ACTION_STOP;
+ /*
+ * We don't get another interrupt on read so
+ * finish the transfer now
+ */
+ if (dir)
+ mpc_i2c_finish(i2c, 0);
+ } else {
+ i2c->action = MPC_I2C_ACTION_RESTART;
+ }
+ }
}
-static int mpc_read(struct mpc_i2c *i2c, int target,
- u8 *data, int length, int restart, bool recv_len)
+static void mpc_i2c_do_intr(struct mpc_i2c *i2c, u8 status)
{
- unsigned timeout = i2c->adap.timeout;
- int i, result;
- u32 flags = restart ? CCR_RSTA : 0;
+ spin_lock(&i2c->lock);
- /* Switch to read - restart */
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
- /* Write target address byte - this time with the read flag set */
- writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
+ if (!(status & CSR_MCF)) {
+ dev_dbg(i2c->dev, "unfinished\n");
+ mpc_i2c_finish(i2c, -EIO);
+ goto out;
+ }
- result = i2c_wait(i2c, timeout, 1);
- if (result < 0)
- return result;
+ if (status & CSR_MAL) {
+ dev_dbg(i2c->dev, "arbitration lost\n");
+ mpc_i2c_finish(i2c, -EAGAIN);
+ goto out;
+ }
- if (length) {
- if (length == 1 && !recv_len)
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
- else
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
- /* Dummy read */
- readb(i2c->base + MPC_I2C_DR);
+ if (i2c->expect_rxack && (status & CSR_RXAK)) {
+ dev_dbg(i2c->dev, "no Rx ACK\n");
+ mpc_i2c_finish(i2c, -ENXIO);
+ goto out;
}
+ i2c->expect_rxack = 0;
- for (i = 0; i < length; i++) {
- u8 byte;
-
- result = i2c_wait(i2c, timeout, 0);
- if (result < 0)
- return result;
-
- /*
- * For block reads, we have to know the total length (1st byte)
- * before we can determine if we are done.
- */
- if (i || !recv_len) {
- /* Generate txack on next to last byte */
- if (i == length - 2)
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
- | CCR_TXAK);
- /* Do not generate stop on last byte */
- if (i == length - 1)
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
- | CCR_MTX);
- }
+ mpc_i2c_do_action(i2c);
- byte = readb(i2c->base + MPC_I2C_DR);
+out:
+ spin_unlock(&i2c->lock);
+}
- /*
- * Adjust length if first received byte is length.
- * The length is 1 length byte plus actually data length
- */
- if (i == 0 && recv_len) {
- if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX)
- return -EPROTO;
- length += byte;
- /*
- * For block reads, generate txack here if data length
- * is 1 byte (total length is 2 bytes).
- */
- if (length == 2)
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
- | CCR_TXAK);
- }
- data[i] = byte;
+static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
+{
+ struct mpc_i2c *i2c = dev_id;
+ u8 status;
+
+ status = readb(i2c->base + MPC_I2C_SR);
+ if (status & CSR_MIF) {
+ writeb(0, i2c->base + MPC_I2C_SR);
+ mpc_i2c_do_intr(i2c, status);
+ return IRQ_HANDLED;
}
+ return IRQ_NONE;
+}
- return length;
+static int mpc_i2c_wait_for_completion(struct mpc_i2c *i2c)
+{
+ long time_left;
+
+ time_left = wait_event_timeout(i2c->waitq, !i2c->block, i2c->adap.timeout);
+ if (!time_left)
+ return -ETIMEDOUT;
+ if (time_left < 0)
+ return time_left;
+
+ return 0;
}
-static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+static int mpc_i2c_execute_msg(struct mpc_i2c *i2c)
{
- struct i2c_msg *pmsg;
- int i;
- int ret = 0;
- unsigned long orig_jiffies = jiffies;
- struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+ unsigned long orig_jiffies;
+ unsigned long flags;
+ int ret;
- mpc_i2c_start(i2c);
+ spin_lock_irqsave(&i2c->lock, flags);
- /* Allow bus up to 1s to become not busy */
- while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
- if (signal_pending(current)) {
- dev_dbg(i2c->dev, "Interrupted\n");
- writeccr(i2c, 0);
- return -EINTR;
- }
- if (time_after(jiffies, orig_jiffies + HZ)) {
- u8 status = readb(i2c->base + MPC_I2C_SR);
+ i2c->curr_msg = 0;
+ i2c->rc = 0;
+ i2c->byte_posn = 0;
+ i2c->block = 1;
+ i2c->action = MPC_I2C_ACTION_START;
- dev_dbg(i2c->dev, "timeout\n");
- if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
- writeb(status & ~CSR_MAL,
- i2c->base + MPC_I2C_SR);
- mpc_i2c_fixup(i2c);
- }
- return -EIO;
- }
- schedule();
- }
+ i2c->cntl_bits = CCR_MEN | CCR_MIEN;
+ writeb(0, i2c->base + MPC_I2C_SR);
+ writeccr(i2c, i2c->cntl_bits);
+
+ mpc_i2c_do_action(i2c);
+
+ spin_unlock_irqrestore(&i2c->lock, flags);
+
+ ret = mpc_i2c_wait_for_completion(i2c);
+ if (ret)
+ i2c->rc = ret;
+
+ if (i2c->rc == -EIO || i2c->rc == -EAGAIN || i2c->rc == -ETIMEDOUT)
+ i2c_recover_bus(&i2c->adap);
- for (i = 0; ret >= 0 && i < num; i++) {
- pmsg = &msgs[i];
- dev_dbg(i2c->dev,
- "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, pmsg->addr, i + 1, num);
- if (pmsg->flags & I2C_M_RD) {
- bool recv_len = pmsg->flags & I2C_M_RECV_LEN;
-
- ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i,
- recv_len);
- if (recv_len && ret > 0)
- pmsg->len = ret;
- } else {
- ret =
- mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
- }
- }
- mpc_i2c_stop(i2c); /* Initiate STOP */
orig_jiffies = jiffies;
/* Wait until STOP is seen, allow up to 1 s */
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
@@ -622,13 +623,41 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
writeb(status & ~CSR_MAL,
i2c->base + MPC_I2C_SR);
- mpc_i2c_fixup(i2c);
+ i2c_recover_bus(&i2c->adap);
}
return -EIO;
}
cond_resched();
}
- return (ret < 0) ? ret : num;
+
+ return i2c->rc;
+}
+
+static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ int rc, ret = num;
+ struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+ int i;
+
+ dev_dbg(i2c->dev, "num = %d\n", num);
+ for (i = 0; i < num; i++)
+ dev_dbg(i2c->dev, " addr = %02x, flags = %02x, len = %d, %*ph\n",
+ msgs[i].addr, msgs[i].flags, msgs[i].len,
+ msgs[i].flags & I2C_M_RD ? 0 : msgs[i].len,
+ msgs[i].buf);
+
+ WARN_ON(i2c->msgs != NULL);
+ i2c->msgs = msgs;
+ i2c->num_msgs = num;
+
+ rc = mpc_i2c_execute_msg(i2c);
+ if (rc < 0)
+ ret = rc;
+
+ i2c->num_msgs = 0;
+ i2c->msgs = NULL;
+
+ return ret;
}
static u32 mpc_functionality(struct i2c_adapter *adap)
@@ -637,6 +666,15 @@ static u32 mpc_functionality(struct i2c_adapter *adap)
| I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
}
+static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
+{
+ struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+ mpc_i2c_fixup(i2c);
+
+ return 0;
+}
+
static const struct i2c_algorithm mpc_algo = {
.master_xfer = mpc_xfer,
.functionality = mpc_functionality,
@@ -648,63 +686,61 @@ static struct i2c_adapter mpc_ops = {
.timeout = HZ,
};
-static const struct of_device_id mpc_i2c_of_match[];
+static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
+ .recover_bus = fsl_i2c_bus_recovery,
+};
+
static int fsl_i2c_probe(struct platform_device *op)
{
- const struct of_device_id *match;
+ const struct mpc_i2c_data *data;
struct mpc_i2c *i2c;
const u32 *prop;
u32 clock = MPC_I2C_CLOCK_LEGACY;
int result = 0;
int plen;
- struct resource res;
struct clk *clk;
int err;
- match = of_match_device(mpc_i2c_of_match, &op->dev);
- if (!match)
- return -EINVAL;
-
- i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
i2c->dev = &op->dev; /* for debug and error output */
- init_waitqueue_head(&i2c->queue);
+ init_waitqueue_head(&i2c->waitq);
+ spin_lock_init(&i2c->lock);
- i2c->base = of_iomap(op->dev.of_node, 0);
- if (!i2c->base) {
- dev_err(i2c->dev, "failed to map controller\n");
- result = -ENOMEM;
- goto fail_map;
- }
+ i2c->base = devm_platform_ioremap_resource(op, 0);
+ if (IS_ERR(i2c->base))
+ return PTR_ERR(i2c->base);
- i2c->irq = irq_of_parse_and_map(op->dev.of_node, 0);
- if (i2c->irq) { /* no i2c->irq implies polling */
- result = request_irq(i2c->irq, mpc_i2c_isr,
- IRQF_SHARED, "i2c-mpc", i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto fail_request;
- }
+ i2c->irq = platform_get_irq(op, 0);
+ if (i2c->irq < 0)
+ return i2c->irq;
+
+ result = devm_request_irq(&op->dev, i2c->irq, mpc_i2c_isr,
+ IRQF_SHARED, "i2c-mpc", i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ return result;
}
/*
* enable clock for the I2C peripheral (non fatal),
* keep a reference upon successful allocation
*/
- clk = devm_clk_get(&op->dev, NULL);
- if (!IS_ERR(clk)) {
- err = clk_prepare_enable(clk);
- if (err) {
- dev_err(&op->dev, "failed to enable clock\n");
- goto fail_request;
- } else {
- i2c->clk_per = clk;
- }
+ clk = devm_clk_get_optional(&op->dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ err = clk_prepare_enable(clk);
+ if (err) {
+ dev_err(&op->dev, "failed to enable clock\n");
+ return err;
}
+ i2c->clk_per = clk;
+
if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) {
clock = MPC_I2C_CLOCK_PRESERVE;
} else {
@@ -714,8 +750,8 @@ static int fsl_i2c_probe(struct platform_device *op)
clock = *prop;
}
- if (match->data) {
- const struct mpc_i2c_data *data = match->data;
+ data = device_get_match_data(&op->dev);
+ if (data) {
data->setup(op->dev.of_node, i2c, clock);
} else {
/* Backwards compatibility */
@@ -731,31 +767,25 @@ static int fsl_i2c_probe(struct platform_device *op)
}
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
- platform_set_drvdata(op, i2c);
-
i2c->adap = mpc_ops;
- of_address_to_resource(op->dev.of_node, 0, &res);
scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
- "MPC adapter at 0x%llx", (unsigned long long)res.start);
- i2c_set_adapdata(&i2c->adap, i2c);
+ "MPC adapter (%s)", of_node_full_name(op->dev.of_node));
i2c->adap.dev.parent = &op->dev;
+ i2c->adap.nr = op->id;
i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
+ i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
+ platform_set_drvdata(op, i2c);
+ i2c_set_adapdata(&i2c->adap, i2c);
- result = i2c_add_adapter(&i2c->adap);
- if (result < 0)
+ result = i2c_add_numbered_adapter(&i2c->adap);
+ if (result)
goto fail_add;
- return result;
+ return 0;
fail_add:
- if (i2c->clk_per)
- clk_disable_unprepare(i2c->clk_per);
- free_irq(i2c->irq, i2c);
- fail_request:
- irq_dispose_mapping(i2c->irq);
- iounmap(i2c->base);
- fail_map:
- kfree(i2c);
+ clk_disable_unprepare(i2c->clk_per);
+
return result;
};
@@ -765,20 +795,12 @@ static int fsl_i2c_remove(struct platform_device *op)
i2c_del_adapter(&i2c->adap);
- if (i2c->clk_per)
- clk_disable_unprepare(i2c->clk_per);
+ clk_disable_unprepare(i2c->clk_per);
- if (i2c->irq)
- free_irq(i2c->irq, i2c);
-
- irq_dispose_mapping(i2c->irq);
- iounmap(i2c->base);
- kfree(i2c);
return 0;
};
-#ifdef CONFIG_PM_SLEEP
-static int mpc_i2c_suspend(struct device *dev)
+static int __maybe_unused mpc_i2c_suspend(struct device *dev)
{
struct mpc_i2c *i2c = dev_get_drvdata(dev);
@@ -788,7 +810,7 @@ static int mpc_i2c_suspend(struct device *dev)
return 0;
}
-static int mpc_i2c_resume(struct device *dev)
+static int __maybe_unused mpc_i2c_resume(struct device *dev)
{
struct mpc_i2c *i2c = dev_get_drvdata(dev);
@@ -797,12 +819,7 @@ static int mpc_i2c_resume(struct device *dev)
return 0;
}
-
static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
-#define MPC_I2C_PM_OPS (&mpc_i2c_pm_ops)
-#else
-#define MPC_I2C_PM_OPS NULL
-#endif
static const struct mpc_i2c_data mpc_i2c_data_512x = {
.setup = mpc_i2c_setup_512x,
@@ -845,7 +862,7 @@ static struct platform_driver mpc_i2c_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = mpc_i2c_of_match,
- .pm = MPC_I2C_PM_OPS,
+ .pm = &mpc_i2c_pm_ops,
},
};
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 2ffd2f354d0a..5ddfa4e56ee2 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -231,6 +231,7 @@ struct mtk_i2c {
struct i2c_adapter adap; /* i2c host adapter */
struct device *dev;
struct completion msg_complete;
+ struct i2c_timings timing_info;
/* set in i2c probe */
void __iomem *base; /* i2c base addr */
@@ -479,7 +480,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
- if (i2c->dev_comp->dma_sync) {
+ if (i2c->dev_comp->apdma_sync) {
writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST);
udelay(10);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
@@ -564,7 +565,7 @@ static const struct i2c_spec_values *mtk_i2c_get_spec(unsigned int speed)
static int mtk_i2c_max_step_cnt(unsigned int target_speed)
{
- if (target_speed > I2C_MAX_FAST_MODE_FREQ)
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
return MAX_HS_STEP_CNT_DIV;
else
return MAX_STEP_CNT_DIV;
@@ -607,7 +608,8 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
else
clk_ns = sample_ns / 2;
- su_sta_cnt = DIV_ROUND_UP(spec->min_su_sta_ns, clk_ns);
+ su_sta_cnt = DIV_ROUND_UP(spec->min_su_sta_ns +
+ i2c->timing_info.scl_int_delay_ns, clk_ns);
if (su_sta_cnt > max_sta_cnt)
return -1;
@@ -635,7 +637,7 @@ static int mtk_i2c_check_ac_timing(struct mtk_i2c *i2c,
if (sda_min > sda_max)
return -3;
- if (check_speed > I2C_MAX_FAST_MODE_FREQ) {
+ if (check_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
if (i2c->dev_comp->ltiming_adjust) {
i2c->ac_timing.hs = I2C_TIME_DEFAULT_VALUE |
(sample_cnt << 12) | (high_cnt << 8);
@@ -850,7 +852,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
- if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
+ if ((i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) || (left_num >= 1))
control_reg |= I2C_CONTROL_RS;
if (i2c->op == I2C_MASTER_WRRD)
@@ -1067,7 +1069,8 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
}
}
- if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
+ if (i2c->auto_restart && num >= 2 &&
+ i2c->speed_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
/* ignore the first restart irq after the master code,
* otherwise the first transfer will be discarded.
*/
@@ -1175,6 +1178,8 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
i2c->use_push_pull =
of_property_read_bool(np, "mediatek,use-push-pull");
+ i2c_parse_fw_timings(i2c->dev, &i2c->timing_info, true);
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index a3363b20f168..dc77e1c4e80f 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -277,7 +277,7 @@ static int init_hw(struct nmk_i2c_dev *dev)
goto exit;
/* disable the controller */
- i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
+ i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
disable_all_interrupts(dev);
@@ -525,7 +525,7 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
dev->virtbase + I2C_CR);
/* enable the controller */
- i2c_set_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
+ i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
init_completion(&dev->xfer_complete);
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index 6b20601ffb13..b5055a3cbd93 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -262,6 +262,10 @@ static const struct property_entry ccgx_props[] = {
{ }
};
+static const struct software_node ccgx_node = {
+ .properties = ccgx_props,
+};
+
static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
{
i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
@@ -274,7 +278,7 @@ static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
sizeof(i2cd->gpu_ccgx_ucsi->type));
i2cd->gpu_ccgx_ucsi->addr = 0x8;
i2cd->gpu_ccgx_ucsi->irq = irq;
- i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
+ i2cd->gpu_ccgx_ucsi->swnode = &ccgx_node;
i2cd->ccgx_client = i2c_new_client_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
return PTR_ERR_OR_ZERO(i2cd->ccgx_client);
}
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 12ac4212aded..d4f6c6d60683 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1404,9 +1404,9 @@ omap_i2c_probe(struct platform_device *pdev)
pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT);
pm_runtime_use_autosuspend(omap->dev);
- r = pm_runtime_get_sync(omap->dev);
+ r = pm_runtime_resume_and_get(omap->dev);
if (r < 0)
- goto err_free_mem;
+ goto err_disable_pm;
/*
* Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
@@ -1513,8 +1513,8 @@ err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
pm_runtime_dont_use_autosuspend(omap->dev);
pm_runtime_put_sync(omap->dev);
+err_disable_pm:
pm_runtime_disable(&pdev->dev);
-err_free_mem:
return r;
}
@@ -1525,7 +1525,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
int ret;
i2c_del_adapter(&omap->adapter);
- ret = pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_resume_and_get(&pdev->dev);
if (ret < 0)
return ret;
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 3e38e114948b..5241e6f414e9 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -76,11 +76,6 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
* but I think the current API makes no sense and I don't want
* any driver that I haven't verified for correctness to go
* anywhere near a pmac i2c bus anyway ...
- *
- * I'm also not completely sure what kind of phases to do between
- * the actual command and the data (what I am _supposed_ to do that
- * is). For now, I assume writes are a single stream and reads have
- * a repeat start/addr phase (but not stop in between)
*/
case I2C_SMBUS_BLOCK_DATA:
buf = data->block;
diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c
index 1c259b5188de..c63d5545fc2a 100644
--- a/drivers/i2c/busses/i2c-qcom-cci.c
+++ b/drivers/i2c/busses/i2c-qcom-cci.c
@@ -569,9 +569,9 @@ static int cci_probe(struct platform_device *pdev)
cci->master[idx].mode = I2C_MODE_STANDARD;
ret = of_property_read_u32(child, "clock-frequency", &val);
if (!ret) {
- if (val == 400000)
+ if (val == I2C_MAX_FAST_MODE_FREQ)
cci->master[idx].mode = I2C_MODE_FAST;
- else if (val == 1000000)
+ else if (val == I2C_MAX_FAST_MODE_PLUS_FREQ)
cci->master[idx].mode = I2C_MODE_FAST_PLUS;
}
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 12f6d452c0f7..327c092a4130 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -141,6 +141,7 @@ struct rcar_i2c_priv {
enum dma_data_direction dma_direction;
struct reset_control *rstc;
+ bool atomic_xfer;
int irq;
struct i2c_client *host_notify_client;
@@ -353,7 +354,9 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
rcar_i2c_write(priv, ICMSR, 0);
}
- rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
+
+ if (!priv->atomic_xfer)
+ rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
}
static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
@@ -418,7 +421,7 @@ static bool rcar_i2c_dma(struct rcar_i2c_priv *priv)
int len;
/* Do various checks to see if DMA is feasible at all */
- if (IS_ERR(chan) || msg->len < RCAR_MIN_DMA_LEN ||
+ if (priv->atomic_xfer || IS_ERR(chan) || msg->len < RCAR_MIN_DMA_LEN ||
!(msg->flags & I2C_M_DMA_SAFE) || (read && priv->flags & ID_P_NO_RXDMA))
return false;
@@ -646,7 +649,8 @@ static irqreturn_t rcar_i2c_irq(int irq, struct rcar_i2c_priv *priv, u32 msr)
/* Nack */
if (msr & MNR) {
/* HW automatically sends STOP after received NACK */
- rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
+ if (!priv->atomic_xfer)
+ rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
priv->flags |= ID_NACK;
goto out;
}
@@ -667,7 +671,8 @@ out:
if (priv->flags & ID_DONE) {
rcar_i2c_write(priv, ICMIER, 0);
rcar_i2c_write(priv, ICMSR, 0);
- wake_up(&priv->wait);
+ if (!priv->atomic_xfer)
+ wake_up(&priv->wait);
}
return IRQ_HANDLED;
@@ -684,7 +689,8 @@ static irqreturn_t rcar_i2c_gen2_irq(int irq, void *ptr)
/* Only handle interrupts that are currently enabled */
msr = rcar_i2c_read(priv, ICMSR);
- msr &= rcar_i2c_read(priv, ICMIER);
+ if (!priv->atomic_xfer)
+ msr &= rcar_i2c_read(priv, ICMIER);
return rcar_i2c_irq(irq, priv, msr);
}
@@ -696,7 +702,8 @@ static irqreturn_t rcar_i2c_gen3_irq(int irq, void *ptr)
/* Only handle interrupts that are currently enabled */
msr = rcar_i2c_read(priv, ICMSR);
- msr &= rcar_i2c_read(priv, ICMIER);
+ if (!priv->atomic_xfer)
+ msr &= rcar_i2c_read(priv, ICMIER);
/*
* Clear START or STOP immediately, except for REPSTART after read or
@@ -804,6 +811,8 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
int i, ret;
long time_left;
+ priv->atomic_xfer = false;
+
pm_runtime_get_sync(dev);
/* Check bus state before init otherwise bus busy info will be lost */
@@ -858,6 +867,68 @@ out:
return ret;
}
+static int rcar_i2c_master_xfer_atomic(struct i2c_adapter *adap,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+ struct device *dev = rcar_i2c_priv_to_dev(priv);
+ unsigned long j;
+ bool time_left;
+ int ret;
+
+ priv->atomic_xfer = true;
+
+ pm_runtime_get_sync(dev);
+
+ /* Check bus state before init otherwise bus busy info will be lost */
+ ret = rcar_i2c_bus_barrier(priv);
+ if (ret < 0)
+ goto out;
+
+ rcar_i2c_init(priv);
+
+ /* init first message */
+ priv->msg = msgs;
+ priv->msgs_left = num;
+ priv->flags = (priv->flags & ID_P_MASK) | ID_FIRST_MSG;
+ rcar_i2c_prepare_msg(priv);
+
+ j = jiffies + num * adap->timeout;
+ do {
+ u32 msr = rcar_i2c_read(priv, ICMSR);
+
+ msr &= (rcar_i2c_is_recv(priv) ? RCAR_IRQ_RECV : RCAR_IRQ_SEND) | RCAR_IRQ_STOP;
+
+ if (msr) {
+ if (priv->devtype < I2C_RCAR_GEN3)
+ rcar_i2c_gen2_irq(0, priv);
+ else
+ rcar_i2c_gen3_irq(0, priv);
+ }
+
+ time_left = time_before_eq(jiffies, j);
+ } while (!(priv->flags & ID_DONE) && time_left);
+
+ if (!time_left) {
+ rcar_i2c_init(priv);
+ ret = -ETIMEDOUT;
+ } else if (priv->flags & ID_NACK) {
+ ret = -ENXIO;
+ } else if (priv->flags & ID_ARBLOST) {
+ ret = -EAGAIN;
+ } else {
+ ret = num - priv->msgs_left; /* The number of transfer */
+ }
+out:
+ pm_runtime_put(dev);
+
+ if (ret < 0 && ret != -ENXIO)
+ dev_err(dev, "error %d : %x\n", ret, priv->flags);
+
+ return ret;
+}
+
static int rcar_reg_slave(struct i2c_client *slave)
{
struct rcar_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
@@ -922,6 +993,7 @@ static u32 rcar_i2c_func(struct i2c_adapter *adap)
static const struct i2c_algorithm rcar_i2c_algo = {
.master_xfer = rcar_i2c_master_xfer,
+ .master_xfer_atomic = rcar_i2c_master_xfer_atomic,
.functionality = rcar_i2c_func,
.reg_slave = rcar_reg_slave,
.unreg_slave = rcar_unreg_slave,
@@ -1027,7 +1099,10 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (of_property_read_bool(dev->of_node, "smbus"))
priv->flags |= ID_P_HOST_NOTIFY;
- priv->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto out_pm_disable;
+ priv->irq = ret;
ret = devm_request_irq(dev, priv->irq, irqhandler, irqflags, dev_name(dev), priv);
if (ret < 0) {
dev_err(dev, "cannot get irq %d\n", priv->irq);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 62a903fbe912..ab928613afba 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/gpio/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/mfd/syscon.h>
@@ -156,12 +157,8 @@ MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
*/
static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev)
{
- if (pdev->dev.of_node) {
- const struct of_device_id *match;
-
- match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
- return (kernel_ulong_t)match->data;
- }
+ if (pdev->dev.of_node)
+ return (kernel_ulong_t)of_device_get_match_data(&pdev->dev);
return platform_get_device_id(pdev)->driver_data;
}
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 1dc387392e74..6746aa46d96c 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -18,8 +18,6 @@
/* SMBUS HID definition as supported by Microsoft Windows */
#define ACPI_SMBUS_MS_HID "SMB0001"
-ACPI_MODULE_NAME("smbus_cmi");
-
struct smbus_methods_t {
char *mt_info;
char *mt_sbr;
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index c2005c789d2b..319d1fa617c8 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -471,7 +471,10 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
goto out2;
}
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto out3;
+ id->irq = ret;
id->adap.nr = pdev->id;
id->adap.algo = &sh7760_i2c_algo;
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 2917fecf6c80..4fe15cd78907 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -290,7 +290,7 @@ static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap,
struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
int im, ret;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -576,7 +576,7 @@ static int sprd_i2c_remove(struct platform_device *pdev)
struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
int ret;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -640,6 +640,7 @@ static const struct of_device_id sprd_i2c_of_match[] = {
{ .compatible = "sprd,sc9860-i2c", },
{},
};
+MODULE_DEVICE_TABLE(of, sprd_i2c_of_match);
static struct platform_driver sprd_i2c_driver = {
.probe = sprd_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index c62c815b88eb..0138317ea600 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -164,7 +164,6 @@ enum {
#define STM32F7_I2C_DNF_DEFAULT 0
#define STM32F7_I2C_DNF_MAX 15
-#define STM32F7_I2C_ANALOG_FILTER_ENABLE 1
#define STM32F7_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */
#define STM32F7_I2C_ANALOG_FILTER_DELAY_MAX 260 /* ns */
@@ -223,8 +222,6 @@ struct stm32f7_i2c_spec {
* @clock_src: I2C clock source frequency (Hz)
* @rise_time: Rise time (ns)
* @fall_time: Fall time (ns)
- * @dnf: Digital filter coefficient (0-16)
- * @analog_filter: Analog filter delay (On/Off)
* @fmp_clr_offset: Fast Mode Plus clear register offset from set register
*/
struct stm32f7_i2c_setup {
@@ -232,8 +229,6 @@ struct stm32f7_i2c_setup {
u32 clock_src;
u32 rise_time;
u32 fall_time;
- u8 dnf;
- bool analog_filter;
u32 fmp_clr_offset;
};
@@ -312,6 +307,9 @@ struct stm32f7_i2c_msg {
* @wakeup_src: boolean to know if the device is a wakeup source
* @smbus_mode: states that the controller is configured in SMBus mode
* @host_notify_client: SMBus host-notify client
+ * @analog_filter: boolean to indicate enabling of the analog filter
+ * @dnf_dt: value of digital filter requested via dt
+ * @dnf: value of digital filter to apply
*/
struct stm32f7_i2c_dev {
struct i2c_adapter adap;
@@ -340,6 +338,9 @@ struct stm32f7_i2c_dev {
bool wakeup_src;
bool smbus_mode;
struct i2c_client *host_notify_client;
+ bool analog_filter;
+ u32 dnf_dt;
+ u32 dnf;
};
/*
@@ -385,15 +386,11 @@ static struct stm32f7_i2c_spec stm32f7_i2c_specs[] = {
static const struct stm32f7_i2c_setup stm32f7_setup = {
.rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
.fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
- .dnf = STM32F7_I2C_DNF_DEFAULT,
- .analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE,
};
static const struct stm32f7_i2c_setup stm32mp15_setup = {
.rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
.fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
- .dnf = STM32F7_I2C_DNF_DEFAULT,
- .analog_filter = STM32F7_I2C_ANALOG_FILTER_ENABLE,
.fmp_clr_offset = 0x40,
};
@@ -462,27 +459,28 @@ static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
return -EINVAL;
}
- if (setup->dnf > STM32F7_I2C_DNF_MAX) {
+ i2c_dev->dnf = DIV_ROUND_CLOSEST(i2c_dev->dnf_dt, i2cclk);
+ if (i2c_dev->dnf > STM32F7_I2C_DNF_MAX) {
dev_err(i2c_dev->dev,
"DNF out of bound %d/%d\n",
- setup->dnf, STM32F7_I2C_DNF_MAX);
+ i2c_dev->dnf * i2cclk, STM32F7_I2C_DNF_MAX * i2cclk);
return -EINVAL;
}
/* Analog and Digital Filters */
af_delay_min =
- (setup->analog_filter ?
+ (i2c_dev->analog_filter ?
STM32F7_I2C_ANALOG_FILTER_DELAY_MIN : 0);
af_delay_max =
- (setup->analog_filter ?
+ (i2c_dev->analog_filter ?
STM32F7_I2C_ANALOG_FILTER_DELAY_MAX : 0);
- dnf_delay = setup->dnf * i2cclk;
+ dnf_delay = i2c_dev->dnf * i2cclk;
sdadel_min = specs->hddat_min + setup->fall_time -
- af_delay_min - (setup->dnf + 3) * i2cclk;
+ af_delay_min - (i2c_dev->dnf + 3) * i2cclk;
sdadel_max = specs->vddat_max - setup->rise_time -
- af_delay_max - (setup->dnf + 4) * i2cclk;
+ af_delay_max - (i2c_dev->dnf + 4) * i2cclk;
scldel_min = setup->rise_time + specs->sudat_min;
@@ -648,6 +646,7 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
setup->speed_freq = t->bus_freq_hz;
i2c_dev->setup.rise_time = t->scl_rise_ns;
i2c_dev->setup.fall_time = t->scl_fall_ns;
+ i2c_dev->dnf_dt = t->digital_filter_width_ns;
setup->clock_src = clk_get_rate(i2c_dev->clk);
if (!setup->clock_src) {
@@ -655,6 +654,9 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
return -EINVAL;
}
+ if (!of_property_read_bool(i2c_dev->dev->of_node, "i2c-digital-filter"))
+ i2c_dev->dnf_dt = STM32F7_I2C_DNF_DEFAULT;
+
do {
ret = stm32f7_i2c_compute_timing(i2c_dev, setup,
&i2c_dev->timing);
@@ -676,12 +678,15 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
return ret;
}
+ i2c_dev->analog_filter = of_property_read_bool(i2c_dev->dev->of_node,
+ "i2c-analog-filter");
+
dev_dbg(i2c_dev->dev, "I2C Speed(%i), Clk Source(%i)\n",
setup->speed_freq, setup->clock_src);
dev_dbg(i2c_dev->dev, "I2C Rise(%i) and Fall(%i) Time\n",
setup->rise_time, setup->fall_time);
dev_dbg(i2c_dev->dev, "I2C Analog Filter(%s), DNF(%i)\n",
- (setup->analog_filter ? "On" : "Off"), setup->dnf);
+ (i2c_dev->analog_filter ? "On" : "Off"), i2c_dev->dnf);
i2c_dev->bus_rate = setup->speed_freq;
@@ -720,8 +725,8 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
timing |= STM32F7_I2C_TIMINGR_SCLL(t->scll);
writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR);
- /* Enable I2C */
- if (i2c_dev->setup.analog_filter)
+ /* Configure the Analog Filter */
+ if (i2c_dev->analog_filter)
stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
STM32F7_I2C_CR1_ANFOFF);
else
@@ -732,7 +737,7 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
STM32F7_I2C_CR1_DNF_MASK);
stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
- STM32F7_I2C_CR1_DNF(i2c_dev->setup.dnf));
+ STM32F7_I2C_CR1_DNF(i2c_dev->dnf));
stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
STM32F7_I2C_CR1_PE);
@@ -1597,7 +1602,8 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
/* Bus error */
if (status & STM32F7_I2C_ISR_BERR) {
- dev_err(dev, "<%s>: Bus error\n", __func__);
+ dev_err(dev, "<%s>: Bus error accessing addr 0x%x\n",
+ __func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
stm32f7_i2c_release_bus(&i2c_dev->adap);
f7_msg->result = -EIO;
@@ -1605,13 +1611,15 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
/* Arbitration loss */
if (status & STM32F7_I2C_ISR_ARLO) {
- dev_dbg(dev, "<%s>: Arbitration loss\n", __func__);
+ dev_dbg(dev, "<%s>: Arbitration loss accessing addr 0x%x\n",
+ __func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_ARLOCF, base + STM32F7_I2C_ICR);
f7_msg->result = -EAGAIN;
}
if (status & STM32F7_I2C_ISR_PECERR) {
- dev_err(dev, "<%s>: PEC error in reception\n", __func__);
+ dev_err(dev, "<%s>: PEC error in reception accessing addr 0x%x\n",
+ __func__, f7_msg->addr);
writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR);
f7_msg->result = -EINVAL;
}
@@ -1652,7 +1660,7 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
i2c_dev->msg_id = 0;
f7_msg->smbus = false;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -1698,7 +1706,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
f7_msg->read_write = read_write;
f7_msg->smbus = true;
- ret = pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
@@ -1799,7 +1807,7 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
if (ret)
return ret;
- ret = pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
@@ -1880,7 +1888,7 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
WARN_ON(!i2c_dev->slave[id]);
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -2027,12 +2035,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
phy_addr = (dma_addr_t)res->start;
irq_event = platform_get_irq(pdev, 0);
- if (irq_event <= 0) {
- if (irq_event != -EPROBE_DEFER)
- dev_err(&pdev->dev, "Failed to get IRQ event: %d\n",
- irq_event);
+ if (irq_event <= 0)
return irq_event ? : -ENOENT;
- }
irq_error = platform_get_irq(pdev, 1);
if (irq_error <= 0)
@@ -2267,13 +2271,12 @@ static int __maybe_unused stm32f7_i2c_runtime_resume(struct device *dev)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
+static int __maybe_unused stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
{
int ret;
struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -2289,13 +2292,13 @@ static int stm32f7_i2c_regs_backup(struct stm32f7_i2c_dev *i2c_dev)
return ret;
}
-static int stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
+static int __maybe_unused stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
{
u32 cr1;
int ret;
struct stm32f7_i2c_regs *backup_regs = &i2c_dev->backup_regs;
- ret = pm_runtime_get_sync(i2c_dev->dev);
+ ret = pm_runtime_resume_and_get(i2c_dev->dev);
if (ret < 0)
return ret;
@@ -2320,7 +2323,7 @@ static int stm32f7_i2c_regs_restore(struct stm32f7_i2c_dev *i2c_dev)
return ret;
}
-static int stm32f7_i2c_suspend(struct device *dev)
+static int __maybe_unused stm32f7_i2c_suspend(struct device *dev)
{
struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
int ret;
@@ -2341,7 +2344,7 @@ static int stm32f7_i2c_suspend(struct device *dev)
return 0;
}
-static int stm32f7_i2c_resume(struct device *dev)
+static int __maybe_unused stm32f7_i2c_resume(struct device *dev)
{
struct stm32f7_i2c_dev *i2c_dev = dev_get_drvdata(dev);
int ret;
@@ -2361,7 +2364,6 @@ static int stm32f7_i2c_resume(struct device *dev)
return 0;
}
-#endif
static const struct dev_pm_ops stm32f7_i2c_pm_ops = {
SET_RUNTIME_PM_OPS(stm32f7_i2c_runtime_suspend,
diff --git a/drivers/i2c/busses/i2c-tegra-bpmp.c b/drivers/i2c/busses/i2c-tegra-bpmp.c
index c0c7d01473f2..3680d608698b 100644
--- a/drivers/i2c/busses/i2c-tegra-bpmp.c
+++ b/drivers/i2c/busses/i2c-tegra-bpmp.c
@@ -38,49 +38,31 @@ struct tegra_bpmp_i2c {
* firmware I2C driver to avoid any issues in future if Linux I2C flags are
* changed.
*/
-static int tegra_bpmp_xlate_flags(u16 flags, u16 *out)
+static void tegra_bpmp_xlate_flags(u16 flags, u16 *out)
{
- if (flags & I2C_M_TEN) {
+ if (flags & I2C_M_TEN)
*out |= SERIALI2C_TEN;
- flags &= ~I2C_M_TEN;
- }
- if (flags & I2C_M_RD) {
+ if (flags & I2C_M_RD)
*out |= SERIALI2C_RD;
- flags &= ~I2C_M_RD;
- }
- if (flags & I2C_M_STOP) {
+ if (flags & I2C_M_STOP)
*out |= SERIALI2C_STOP;
- flags &= ~I2C_M_STOP;
- }
- if (flags & I2C_M_NOSTART) {
+ if (flags & I2C_M_NOSTART)
*out |= SERIALI2C_NOSTART;
- flags &= ~I2C_M_NOSTART;
- }
- if (flags & I2C_M_REV_DIR_ADDR) {
+ if (flags & I2C_M_REV_DIR_ADDR)
*out |= SERIALI2C_REV_DIR_ADDR;
- flags &= ~I2C_M_REV_DIR_ADDR;
- }
- if (flags & I2C_M_IGNORE_NAK) {
+ if (flags & I2C_M_IGNORE_NAK)
*out |= SERIALI2C_IGNORE_NAK;
- flags &= ~I2C_M_IGNORE_NAK;
- }
- if (flags & I2C_M_NO_RD_ACK) {
+ if (flags & I2C_M_NO_RD_ACK)
*out |= SERIALI2C_NO_RD_ACK;
- flags &= ~I2C_M_NO_RD_ACK;
- }
- if (flags & I2C_M_RECV_LEN) {
+ if (flags & I2C_M_RECV_LEN)
*out |= SERIALI2C_RECV_LEN;
- flags &= ~I2C_M_RECV_LEN;
- }
-
- return 0;
}
/**
@@ -97,22 +79,19 @@ static int tegra_bpmp_xlate_flags(u16 flags, u16 *out)
*
* See deserialize_i2c documentation for the data format in the other direction.
*/
-static int tegra_bpmp_serialize_i2c_msg(struct tegra_bpmp_i2c *i2c,
+static void tegra_bpmp_serialize_i2c_msg(struct tegra_bpmp_i2c *i2c,
struct mrq_i2c_request *request,
struct i2c_msg *msgs,
unsigned int num)
{
char *buf = request->xfer.data_buf;
unsigned int i, j, pos = 0;
- int err;
for (i = 0; i < num; i++) {
struct i2c_msg *msg = &msgs[i];
u16 flags = 0;
- err = tegra_bpmp_xlate_flags(msg->flags, &flags);
- if (err < 0)
- return err;
+ tegra_bpmp_xlate_flags(msg->flags, &flags);
buf[pos++] = msg->addr & 0xff;
buf[pos++] = (msg->addr & 0xff00) >> 8;
@@ -128,8 +107,6 @@ static int tegra_bpmp_serialize_i2c_msg(struct tegra_bpmp_i2c *i2c,
}
request->xfer.data_size = pos;
-
- return 0;
}
/**
@@ -217,7 +194,32 @@ static int tegra_bpmp_i2c_msg_xfer(struct tegra_bpmp_i2c *i2c,
else
err = tegra_bpmp_transfer(i2c->bpmp, &msg);
- return err;
+ if (err < 0) {
+ dev_err(i2c->dev, "failed to transfer message: %d\n", err);
+ return err;
+ }
+
+ if (msg.rx.ret != 0) {
+ if (msg.rx.ret == -BPMP_EAGAIN) {
+ dev_dbg(i2c->dev, "arbitration lost\n");
+ return -EAGAIN;
+ }
+
+ if (msg.rx.ret == -BPMP_ETIMEDOUT) {
+ dev_dbg(i2c->dev, "timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ if (msg.rx.ret == -BPMP_ENXIO) {
+ dev_dbg(i2c->dev, "NAK\n");
+ return -ENXIO;
+ }
+
+ dev_err(i2c->dev, "transaction failed: %d\n", msg.rx.ret);
+ return -EIO;
+ }
+
+ return 0;
}
static int tegra_bpmp_i2c_xfer_common(struct i2c_adapter *adapter,
@@ -238,12 +240,7 @@ static int tegra_bpmp_i2c_xfer_common(struct i2c_adapter *adapter,
memset(&request, 0, sizeof(request));
memset(&response, 0, sizeof(response));
- err = tegra_bpmp_serialize_i2c_msg(i2c, &request, msgs, num);
- if (err < 0) {
- dev_err(i2c->dev, "failed to serialize message: %d\n", err);
- return err;
- }
-
+ tegra_bpmp_serialize_i2c_msg(i2c, &request, msgs, num);
err = tegra_bpmp_i2c_msg_xfer(i2c, &request, &response, atomic);
if (err < 0) {
dev_err(i2c->dev, "failed to transfer message: %d\n", err);
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 63cbb9c7c1b0..bba08cbce6e1 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
-#include <linux/version.h>
#define MAILBOX_OP_TIMEOUT 1000 /* Operation time out in ms */
#define MAILBOX_I2C_INDEX 0
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 087b2951942e..2a8568b97c14 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -706,7 +706,7 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__,
xiic_getreg8(i2c, XIIC_SR_REG_OFFSET));
- err = pm_runtime_get_sync(i2c->dev);
+ err = pm_runtime_resume_and_get(i2c->dev);
if (err < 0)
return err;
@@ -873,7 +873,7 @@ static int xiic_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);
- ret = pm_runtime_get_sync(i2c->dev);
+ ret = pm_runtime_resume_and_get(i2c->dev);
if (ret < 0)
return ret;
diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c
index 8bc51d4e69df..4df8ad092df3 100644
--- a/drivers/i2c/i2c-boardinfo.c
+++ b/drivers/i2c/i2c-boardinfo.c
@@ -47,7 +47,6 @@ EXPORT_SYMBOL_GPL(__i2c_first_dynamic_bus_num);
*
* The board info passed can safely be __initdata, but be careful of embedded
* pointers (for platform_data, functions, etc) since that won't be copied.
- * Device properties are deep-copied though.
*/
int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned len)
{
@@ -72,16 +71,6 @@ int i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsig
devinfo->busnum = busnum;
devinfo->board_info = *info;
- if (info->properties) {
- devinfo->board_info.properties =
- property_entries_dup(info->properties);
- if (IS_ERR(devinfo->board_info.properties)) {
- status = PTR_ERR(devinfo->board_info.properties);
- kfree(devinfo);
- break;
- }
- }
-
if (info->resources) {
devinfo->board_info.resources =
kmemdup(info->resources,
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index f21362355973..5a97e4a02fa2 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -76,6 +76,27 @@ void i2c_transfer_trace_unreg(void)
static_branch_dec(&i2c_trace_msg_key);
}
+const char *i2c_freq_mode_string(u32 bus_freq_hz)
+{
+ switch (bus_freq_hz) {
+ case I2C_MAX_STANDARD_MODE_FREQ:
+ return "Standard Mode (100 kHz)";
+ case I2C_MAX_FAST_MODE_FREQ:
+ return "Fast Mode (400 kHz)";
+ case I2C_MAX_FAST_MODE_PLUS_FREQ:
+ return "Fast Mode Plus (1.0 MHz)";
+ case I2C_MAX_TURBO_MODE_FREQ:
+ return "Turbo Mode (1.4 MHz)";
+ case I2C_MAX_HIGH_SPEED_MODE_FREQ:
+ return "High Speed Mode (3.4 MHz)";
+ case I2C_MAX_ULTRA_FAST_MODE_FREQ:
+ return "Ultra Fast Mode (5.0 MHz)";
+ default:
+ return "Unknown Mode";
+ }
+}
+EXPORT_SYMBOL_GPL(i2c_freq_mode_string);
+
const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
const struct i2c_client *client)
{
@@ -249,7 +270,7 @@ EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
int i2c_recover_bus(struct i2c_adapter *adap)
{
if (!adap->bus_recovery_info)
- return -EOPNOTSUPP;
+ return -EBUSY;
dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
return adap->bus_recovery_info->recover_bus(adap);
@@ -519,6 +540,13 @@ static int i2c_device_probe(struct device *dev)
if (status)
goto err_clear_wakeup_irq;
+ client->devres_group_id = devres_open_group(&client->dev, NULL,
+ GFP_KERNEL);
+ if (!client->devres_group_id) {
+ status = -ENOMEM;
+ goto err_detach_pm_domain;
+ }
+
/*
* When there are no more users of probe(),
* rename probe_new to probe.
@@ -531,11 +559,21 @@ static int i2c_device_probe(struct device *dev)
else
status = -EINVAL;
+ /*
+ * Note that we are not closing the devres group opened above so
+ * even resources that were attached to the device after probe is
+ * run are released when i2c_device_remove() is executed. This is
+ * needed as some drivers would allocate additional resources,
+ * for example when updating firmware.
+ */
+
if (status)
- goto err_detach_pm_domain;
+ goto err_release_driver_resources;
return 0;
+err_release_driver_resources:
+ devres_release_group(&client->dev, client->devres_group_id);
err_detach_pm_domain:
dev_pm_domain_detach(&client->dev, true);
err_clear_wakeup_irq:
@@ -564,6 +602,8 @@ static int i2c_device_remove(struct device *dev)
dev_warn(dev, "remove failed (%pe), will be ignored\n", ERR_PTR(status));
}
+ devres_release_group(&client->dev, client->devres_group_id);
+
dev_pm_domain_detach(&client->dev, true);
dev_pm_clear_wake_irq(&client->dev);
@@ -612,7 +652,7 @@ modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
if (len != -ENODEV)
return len;
- len = acpi_device_modalias(dev, buf, PAGE_SIZE -1);
+ len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
if (len != -ENODEV)
return len;
@@ -910,11 +950,11 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
i2c_dev_set_name(adap, client, info);
- if (info->properties) {
- status = device_add_properties(&client->dev, info->properties);
+ if (info->swnode) {
+ status = device_add_software_node(&client->dev, info->swnode);
if (status) {
dev_err(&adap->dev,
- "Failed to add properties to client %s: %d\n",
+ "Failed to add software node to client %s: %d\n",
client->name, status);
goto out_err_put_of_node;
}
@@ -922,16 +962,15 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf
status = device_register(&client->dev);
if (status)
- goto out_free_props;
+ goto out_remove_swnode;
dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
client->name, dev_name(&client->dev));
return client;
-out_free_props:
- if (info->properties)
- device_remove_properties(&client->dev);
+out_remove_swnode:
+ device_remove_software_node(&client->dev);
out_err_put_of_node:
of_node_put(info->of_node);
out_err:
@@ -961,6 +1000,7 @@ void i2c_unregister_device(struct i2c_client *client)
if (ACPI_COMPANION(&client->dev))
acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
+ device_remove_software_node(&client->dev);
device_unregister(&client->dev);
}
EXPORT_SYMBOL_GPL(i2c_unregister_device);
@@ -1017,15 +1057,9 @@ struct i2c_client *i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address
}
EXPORT_SYMBOL_GPL(i2c_new_dummy_device);
-struct i2c_dummy_devres {
- struct i2c_client *client;
-};
-
-static void devm_i2c_release_dummy(struct device *dev, void *res)
+static void devm_i2c_release_dummy(void *client)
{
- struct i2c_dummy_devres *this = res;
-
- i2c_unregister_device(this->client);
+ i2c_unregister_device(client);
}
/**
@@ -1042,20 +1076,16 @@ struct i2c_client *devm_i2c_new_dummy_device(struct device *dev,
struct i2c_adapter *adapter,
u16 address)
{
- struct i2c_dummy_devres *dr;
struct i2c_client *client;
-
- dr = devres_alloc(devm_i2c_release_dummy, sizeof(*dr), GFP_KERNEL);
- if (!dr)
- return ERR_PTR(-ENOMEM);
+ int ret;
client = i2c_new_dummy_device(adapter, address);
- if (IS_ERR(client)) {
- devres_free(dr);
- } else {
- dr->client = client;
- devres_add(dev, dr);
- }
+ if (IS_ERR(client))
+ return client;
+
+ ret = devm_add_action_or_reset(dev, devm_i2c_release_dummy, client);
+ if (ret)
+ return ERR_PTR(ret);
return client;
}
@@ -1704,6 +1734,32 @@ void i2c_del_adapter(struct i2c_adapter *adap)
}
EXPORT_SYMBOL(i2c_del_adapter);
+static void devm_i2c_del_adapter(void *adapter)
+{
+ i2c_del_adapter(adapter);
+}
+
+/**
+ * devm_i2c_add_adapter - device-managed variant of i2c_add_adapter()
+ * @dev: managing device for adding this I2C adapter
+ * @adapter: the adapter to add
+ * Context: can sleep
+ *
+ * Add adapter with dynamic bus number, same with i2c_add_adapter()
+ * but the adapter will be auto deleted on driver detach.
+ */
+int devm_i2c_add_adapter(struct device *dev, struct i2c_adapter *adapter)
+{
+ int ret;
+
+ ret = i2c_add_adapter(adapter);
+ if (ret)
+ return ret;
+
+ return devm_add_action_or_reset(dev, devm_i2c_del_adapter, adapter);
+}
+EXPORT_SYMBOL_GPL(devm_i2c_add_adapter);
+
static void i2c_parse_timing(struct device *dev, char *prop_name, u32 *cur_val_p,
u32 def_val, bool use_def)
{
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 6ceb11cc4be1..6ef38a8ee95c 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -440,8 +440,13 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
sizeof(rdwr_arg)))
return -EFAULT;
- /* Put an arbitrary limit on the number of messages that can
- * be sent at once */
+ if (!rdwr_arg.msgs || rdwr_arg.nmsgs == 0)
+ return -EINVAL;
+
+ /*
+ * Put an arbitrary limit on the number of messages that can
+ * be sent at once
+ */
if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS)
return -EINVAL;
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 97381e2e03ba..2d0bc029619f 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1885,8 +1885,6 @@ static int elantech_create_smbus(struct psmouse *psmouse,
};
unsigned int idx = 0;
- smbus_board.properties = i2c_props;
-
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-x",
info->x_max + 1);
i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-y",
@@ -1918,6 +1916,10 @@ static int elantech_create_smbus(struct psmouse *psmouse,
if (elantech_is_buttonpad(info))
i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,clickpad");
+ smbus_board.fwnode = fwnode_create_software_node(i2c_props, NULL);
+ if (IS_ERR(smbus_board.fwnode))
+ return PTR_ERR(smbus_board.fwnode);
+
return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false,
leave_breadcrumbs);
}
diff --git a/drivers/platform/chrome/chromeos_laptop.c b/drivers/platform/chrome/chromeos_laptop.c
index 472a03daa869..4e14b4d6635d 100644
--- a/drivers/platform/chrome/chromeos_laptop.c
+++ b/drivers/platform/chrome/chromeos_laptop.c
@@ -52,12 +52,15 @@ struct i2c_peripheral {
enum i2c_adapter_type type;
u32 pci_devid;
+ const struct property_entry *properties;
+
struct i2c_client *client;
};
struct acpi_peripheral {
char hid[ACPI_ID_LEN];
- const struct property_entry *properties;
+ struct software_node swnode;
+ struct i2c_client *client;
};
struct chromeos_laptop {
@@ -68,7 +71,7 @@ struct chromeos_laptop {
struct i2c_peripheral *i2c_peripherals;
unsigned int num_i2c_peripherals;
- const struct acpi_peripheral *acpi_peripherals;
+ struct acpi_peripheral *acpi_peripherals;
unsigned int num_acpi_peripherals;
};
@@ -161,7 +164,7 @@ static void chromeos_laptop_check_adapter(struct i2c_adapter *adapter)
static bool chromeos_laptop_adjust_client(struct i2c_client *client)
{
- const struct acpi_peripheral *acpi_dev;
+ struct acpi_peripheral *acpi_dev;
struct acpi_device_id acpi_ids[2] = { };
int i;
int error;
@@ -175,8 +178,7 @@ static bool chromeos_laptop_adjust_client(struct i2c_client *client)
memcpy(acpi_ids[0].id, acpi_dev->hid, ACPI_ID_LEN);
if (acpi_match_device(acpi_ids, &client->dev)) {
- error = device_add_properties(&client->dev,
- acpi_dev->properties);
+ error = device_add_software_node(&client->dev, &acpi_dev->swnode);
if (error) {
dev_err(&client->dev,
"failed to add properties: %d\n",
@@ -184,6 +186,8 @@ static bool chromeos_laptop_adjust_client(struct i2c_client *client)
break;
}
+ acpi_dev->client = client;
+
return true;
}
}
@@ -193,15 +197,28 @@ static bool chromeos_laptop_adjust_client(struct i2c_client *client)
static void chromeos_laptop_detach_i2c_client(struct i2c_client *client)
{
+ struct acpi_peripheral *acpi_dev;
struct i2c_peripheral *i2c_dev;
int i;
- for (i = 0; i < cros_laptop->num_i2c_peripherals; i++) {
- i2c_dev = &cros_laptop->i2c_peripherals[i];
+ if (has_acpi_companion(&client->dev))
+ for (i = 0; i < cros_laptop->num_acpi_peripherals; i++) {
+ acpi_dev = &cros_laptop->acpi_peripherals[i];
- if (i2c_dev->client == client)
- i2c_dev->client = NULL;
- }
+ if (acpi_dev->client == client) {
+ acpi_dev->client = NULL;
+ return;
+ }
+ }
+ else
+ for (i = 0; i < cros_laptop->num_i2c_peripherals; i++) {
+ i2c_dev = &cros_laptop->i2c_peripherals[i];
+
+ if (i2c_dev->client == client) {
+ i2c_dev->client = NULL;
+ return;
+ }
+ }
}
static int chromeos_laptop_i2c_notifier_call(struct notifier_block *nb,
@@ -302,28 +319,26 @@ static struct i2c_peripheral chromebook_pixel_peripherals[] __initdata = {
.board_info = {
I2C_BOARD_INFO("atmel_mxt_ts",
ATMEL_TS_I2C_ADDR),
- .properties =
- chromebook_atmel_touchscreen_props,
.flags = I2C_CLIENT_WAKE,
},
.dmi_name = "touchscreen",
.irqflags = IRQF_TRIGGER_FALLING,
.type = I2C_ADAPTER_PANEL,
.alt_addr = ATMEL_TS_I2C_BL_ADDR,
+ .properties = chromebook_atmel_touchscreen_props,
},
/* Touchpad. */
{
.board_info = {
I2C_BOARD_INFO("atmel_mxt_tp",
ATMEL_TP_I2C_ADDR),
- .properties =
- chromebook_pixel_trackpad_props,
.flags = I2C_CLIENT_WAKE,
},
.dmi_name = "trackpad",
.irqflags = IRQF_TRIGGER_FALLING,
.type = I2C_ADAPTER_VGADDC,
.alt_addr = ATMEL_TP_I2C_BL_ADDR,
+ .properties = chromebook_pixel_trackpad_props,
},
/* Light Sensor. */
{
@@ -414,8 +429,6 @@ static struct i2c_peripheral acer_c720_peripherals[] __initdata = {
.board_info = {
I2C_BOARD_INFO("atmel_mxt_ts",
ATMEL_TS_I2C_ADDR),
- .properties =
- chromebook_atmel_touchscreen_props,
.flags = I2C_CLIENT_WAKE,
},
.dmi_name = "touchscreen",
@@ -423,6 +436,7 @@ static struct i2c_peripheral acer_c720_peripherals[] __initdata = {
.type = I2C_ADAPTER_DESIGNWARE,
.pci_devid = PCI_DEVID(0, PCI_DEVFN(0x15, 0x2)),
.alt_addr = ATMEL_TS_I2C_BL_ADDR,
+ .properties = chromebook_atmel_touchscreen_props,
},
/* Touchpad. */
{
@@ -498,12 +512,16 @@ static struct acpi_peripheral samus_peripherals[] __initdata = {
/* Touchpad */
{
.hid = "ATML0000",
- .properties = samus_trackpad_props,
+ .swnode = {
+ .properties = samus_trackpad_props,
+ },
},
/* Touchsceen */
{
.hid = "ATML0001",
- .properties = chromebook_atmel_touchscreen_props,
+ .swnode = {
+ .properties = chromebook_atmel_touchscreen_props,
+ },
},
};
DECLARE_ACPI_CROS_LAPTOP(samus);
@@ -512,12 +530,16 @@ static struct acpi_peripheral generic_atmel_peripherals[] __initdata = {
/* Touchpad */
{
.hid = "ATML0000",
- .properties = chromebook_pixel_trackpad_props,
+ .swnode = {
+ .properties = chromebook_pixel_trackpad_props,
+ },
},
/* Touchsceen */
{
.hid = "ATML0001",
- .properties = chromebook_atmel_touchscreen_props,
+ .swnode = {
+ .properties = chromebook_atmel_touchscreen_props,
+ },
},
};
DECLARE_ACPI_CROS_LAPTOP(generic_atmel);
@@ -743,12 +765,11 @@ chromeos_laptop_prepare_i2c_peripherals(struct chromeos_laptop *cros_laptop,
if (error)
goto err_out;
- /* We need to deep-copy properties */
- if (info->properties) {
- info->properties =
- property_entries_dup(info->properties);
- if (IS_ERR(info->properties)) {
- error = PTR_ERR(info->properties);
+ /* Create primary fwnode for the device - copies everything */
+ if (i2c_dev->properties) {
+ info->fwnode = fwnode_create_software_node(i2c_dev->properties, NULL);
+ if (IS_ERR(info->fwnode)) {
+ error = PTR_ERR(info->fwnode);
goto err_out;
}
}
@@ -760,8 +781,8 @@ err_out:
while (--i >= 0) {
i2c_dev = &cros_laptop->i2c_peripherals[i];
info = &i2c_dev->board_info;
- if (info->properties)
- property_entries_free(info->properties);
+ if (!IS_ERR_OR_NULL(info->fwnode))
+ fwnode_remove_software_node(info->fwnode);
}
kfree(cros_laptop->i2c_peripherals);
return error;
@@ -801,11 +822,11 @@ chromeos_laptop_prepare_acpi_peripherals(struct chromeos_laptop *cros_laptop,
*acpi_dev = *src_dev;
/* We need to deep-copy properties */
- if (src_dev->properties) {
- acpi_dev->properties =
- property_entries_dup(src_dev->properties);
- if (IS_ERR(acpi_dev->properties)) {
- error = PTR_ERR(acpi_dev->properties);
+ if (src_dev->swnode.properties) {
+ acpi_dev->swnode.properties =
+ property_entries_dup(src_dev->swnode.properties);
+ if (IS_ERR(acpi_dev->swnode.properties)) {
+ error = PTR_ERR(acpi_dev->swnode.properties);
goto err_out;
}
}
@@ -821,8 +842,8 @@ chromeos_laptop_prepare_acpi_peripherals(struct chromeos_laptop *cros_laptop,
err_out:
while (--i >= 0) {
acpi_dev = &acpi_peripherals[i];
- if (acpi_dev->properties)
- property_entries_free(acpi_dev->properties);
+ if (!IS_ERR_OR_NULL(acpi_dev->swnode.properties))
+ property_entries_free(acpi_dev->swnode.properties);
}
kfree(acpi_peripherals);
@@ -833,21 +854,20 @@ static void chromeos_laptop_destroy(const struct chromeos_laptop *cros_laptop)
{
const struct acpi_peripheral *acpi_dev;
struct i2c_peripheral *i2c_dev;
- struct i2c_board_info *info;
int i;
for (i = 0; i < cros_laptop->num_i2c_peripherals; i++) {
i2c_dev = &cros_laptop->i2c_peripherals[i];
- info = &i2c_dev->board_info;
-
i2c_unregister_device(i2c_dev->client);
- property_entries_free(info->properties);
}
for (i = 0; i < cros_laptop->num_acpi_peripherals; i++) {
acpi_dev = &cros_laptop->acpi_peripherals[i];
- property_entries_free(acpi_dev->properties);
+ if (acpi_dev->client)
+ device_remove_software_node(&acpi_dev->client->dev);
+
+ property_entries_free(acpi_dev->swnode.properties);
}
kfree(cros_laptop->i2c_peripherals);
diff --git a/drivers/platform/x86/intel_cht_int33fe_microb.c b/drivers/platform/x86/intel_cht_int33fe_microb.c
index 20b11e0d9a75..673f41cd14b5 100644
--- a/drivers/platform/x86/intel_cht_int33fe_microb.c
+++ b/drivers/platform/x86/intel_cht_int33fe_microb.c
@@ -35,6 +35,10 @@ static const struct property_entry bq27xxx_props[] = {
{ }
};
+static const struct software_node bq27xxx_node = {
+ .properties = bq27xxx_props,
+};
+
int cht_int33fe_microb_probe(struct cht_int33fe_data *data)
{
struct device *dev = data->dev;
@@ -43,7 +47,7 @@ int cht_int33fe_microb_probe(struct cht_int33fe_data *data)
memset(&board_info, 0, sizeof(board_info));
strscpy(board_info.type, "bq27542", ARRAY_SIZE(board_info.type));
board_info.dev_name = "bq27542";
- board_info.properties = bq27xxx_props;
+ board_info.swnode = &bq27xxx_node;
data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info);
return PTR_ERR_OR_ZERO(data->battery_fg);
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 56622658b215..e8f2ac8c9c3d 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -51,6 +51,9 @@ struct module;
struct property_entry;
#if IS_ENABLED(CONFIG_I2C)
+/* Return the Frequency mode string based on the bus frequency */
+const char *i2c_freq_mode_string(u32 bus_freq_hz);
+
/*
* The master routines are the ones normally used to transmit data to devices
* on a bus (or read from them). Apart from two basic transfer functions to
@@ -306,6 +309,8 @@ struct i2c_driver {
* userspace_devices list
* @slave_cb: Callback when I2C slave mode of an adapter is used. The adapter
* calls it to pass on slave events to the slave driver.
+ * @devres_group_id: id of the devres group that will be created for resources
+ * acquired when probing this device.
*
* An i2c_client identifies a single device (i.e. chip) connected to an
* i2c bus. The behaviour exposed to Linux is defined by the driver
@@ -334,6 +339,7 @@ struct i2c_client {
#if IS_ENABLED(CONFIG_I2C_SLAVE)
i2c_slave_cb_t slave_cb; /* callback for slave mode */
#endif
+ void *devres_group_id; /* ID of probe devres group */
};
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
@@ -391,7 +397,7 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
* @platform_data: stored in i2c_client.dev.platform_data
* @of_node: pointer to OpenFirmware device node
* @fwnode: device node supplied by the platform firmware
- * @properties: additional device properties for the device
+ * @swnode: software node for the device
* @resources: resources associated with the device
* @num_resources: number of resources in the @resources array
* @irq: stored in i2c_client.irq
@@ -415,7 +421,7 @@ struct i2c_board_info {
void *platform_data;
struct device_node *of_node;
struct fwnode_handle *fwnode;
- const struct property_entry *properties;
+ const struct software_node *swnode;
const struct resource *resources;
unsigned int num_resources;
int irq;
@@ -687,6 +693,8 @@ struct i2c_adapter_quirks {
#define I2C_AQ_NO_ZERO_LEN_READ BIT(5)
#define I2C_AQ_NO_ZERO_LEN_WRITE BIT(6)
#define I2C_AQ_NO_ZERO_LEN (I2C_AQ_NO_ZERO_LEN_READ | I2C_AQ_NO_ZERO_LEN_WRITE)
+/* adapter cannot do repeated START */
+#define I2C_AQ_NO_REP_START BIT(7)
/*
* i2c_adapter is the structure used to identify a physical i2c bus along
@@ -844,6 +852,7 @@ static inline void i2c_mark_adapter_resumed(struct i2c_adapter *adap)
*/
#if IS_ENABLED(CONFIG_I2C)
int i2c_add_adapter(struct i2c_adapter *adap);
+int devm_i2c_add_adapter(struct device *dev, struct i2c_adapter *adapter);
void i2c_del_adapter(struct i2c_adapter *adap);
int i2c_add_numbered_adapter(struct i2c_adapter *adap);