diff options
author | Stephan Gerhold <stephan@gerhold.net> | 2019-10-08 14:52:08 +0300 |
---|---|---|
committer | Kishon Vijay Abraham I <kishon@ti.com> | 2019-10-31 14:24:01 +0300 |
commit | 64f86b9978449ff05bfa6c64b4c5439e21e9c80b (patch) | |
tree | 6ff52f6c494648f2c17022909fd861a48cfe5ea1 | |
parent | c9baab38fe0e28762d0d67611cbe2aef0fb3fc72 (diff) | |
download | linux-64f86b9978449ff05bfa6c64b4c5439e21e9c80b.tar.xz |
phy: qcom-usb-hs: Fix extcon double register after power cycle
Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().
This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:
double register detected
WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0
Call trace:
...
extcon_register_notifier+0x74/0xb8
devm_extcon_register_notifier+0x54/0xb8
qcom_usb_hs_phy_power_on+0x1fc/0x208
...
... and USB stops working after plugging the cable out and in
another time.
The easiest way to fix this is to make a partial revert of
commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.
Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-rw-r--r-- | drivers/phy/qualcomm/phy-qcom-usb-hs.c | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c index b163b3a1558d..61054272a7c8 100644 --- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c @@ -158,8 +158,8 @@ static int qcom_usb_hs_phy_power_on(struct phy *phy) /* setup initial state */ qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state, uphy->vbus_edev); - ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev, - EXTCON_USB, &uphy->vbus_notify); + ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); if (ret) goto err_ulpi; } @@ -180,6 +180,9 @@ static int qcom_usb_hs_phy_power_off(struct phy *phy) { struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy); + if (uphy->vbus_edev) + extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); regulator_disable(uphy->v3p3); regulator_disable(uphy->v1p8); clk_disable_unprepare(uphy->sleep_clk); |