diff options
author | Michael Grzeschik <m.grzeschik@pengutronix.de> | 2021-06-14 07:31:18 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2021-06-14 22:54:43 +0300 |
commit | ec4b94f9b37bf028cb9b9c39cd1c1cb5dd1ab40c (patch) | |
tree | 1da11280c19dc5fa62ad9f714f66c6be1e0264a0 | |
parent | ffa85b73c3c4143a8e8087c0930f6c5a6ead8e9f (diff) | |
download | linux-ec4b94f9b37bf028cb9b9c39cd1c1cb5dd1ab40c.tar.xz |
net: phy: micrel: move phy reg offsets to common header
Some micrel devices share the same PHY register defines. This patch
moves them to one common header so other drivers can reuse them.
And reuse generic MII_* defines where possible.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/dsa/microchip/ksz8795.c | 119 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz8795_reg.h | 62 | ||||
-rw-r--r-- | drivers/net/ethernet/micrel/ksz884x.c | 105 | ||||
-rw-r--r-- | include/linux/micrel_phy.h | 13 |
4 files changed, 88 insertions, 211 deletions
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index ad509a57a945..ba065003623f 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -15,6 +15,7 @@ #include <linux/phy.h> #include <linux/etherdevice.h> #include <linux/if_bridge.h> +#include <linux/micrel_phy.h> #include <net/dsa.h> #include <net/switchdev.h> @@ -731,88 +732,88 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) u8 p = phy; switch (reg) { - case PHY_REG_CTRL: + case MII_BMCR: ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); if (restart & PORT_PHY_LOOPBACK) - data |= PHY_LOOPBACK; + data |= BMCR_LOOPBACK; if (ctrl & PORT_FORCE_100_MBIT) - data |= PHY_SPEED_100MBIT; + data |= BMCR_SPEED100; if (ksz_is_ksz88x3(dev)) { if ((ctrl & PORT_AUTO_NEG_ENABLE)) - data |= PHY_AUTO_NEG_ENABLE; + data |= BMCR_ANENABLE; } else { if (!(ctrl & PORT_AUTO_NEG_DISABLE)) - data |= PHY_AUTO_NEG_ENABLE; + data |= BMCR_ANENABLE; } if (restart & PORT_POWER_DOWN) - data |= PHY_POWER_DOWN; + data |= BMCR_PDOWN; if (restart & PORT_AUTO_NEG_RESTART) - data |= PHY_AUTO_NEG_RESTART; + data |= BMCR_ANRESTART; if (ctrl & PORT_FORCE_FULL_DUPLEX) - data |= PHY_FULL_DUPLEX; + data |= BMCR_FULLDPLX; if (speed & PORT_HP_MDIX) - data |= PHY_HP_MDIX; + data |= KSZ886X_BMCR_HP_MDIX; if (restart & PORT_FORCE_MDIX) - data |= PHY_FORCE_MDIX; + data |= KSZ886X_BMCR_FORCE_MDI; if (restart & PORT_AUTO_MDIX_DISABLE) - data |= PHY_AUTO_MDIX_DISABLE; + data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; if (restart & PORT_TX_DISABLE) - data |= PHY_TRANSMIT_DISABLE; + data |= KSZ886X_BMCR_DISABLE_TRANSMIT; if (restart & PORT_LED_OFF) - data |= PHY_LED_DISABLE; + data |= KSZ886X_BMCR_DISABLE_LED; break; - case PHY_REG_STATUS: + case MII_BMSR: ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); - data = PHY_100BTX_FD_CAPABLE | - PHY_100BTX_CAPABLE | - PHY_10BT_FD_CAPABLE | - PHY_10BT_CAPABLE | - PHY_AUTO_NEG_CAPABLE; + data = BMSR_100FULL | + BMSR_100HALF | + BMSR_10FULL | + BMSR_10HALF | + BMSR_ANEGCAPABLE; if (link & PORT_AUTO_NEG_COMPLETE) - data |= PHY_AUTO_NEG_ACKNOWLEDGE; + data |= BMSR_ANEGCOMPLETE; if (link & PORT_STAT_LINK_GOOD) - data |= PHY_LINK_STATUS; + data |= BMSR_LSTATUS; break; - case PHY_REG_ID_1: + case MII_PHYSID1: data = KSZ8795_ID_HI; break; - case PHY_REG_ID_2: + case MII_PHYSID2: if (ksz_is_ksz88x3(dev)) data = KSZ8863_ID_LO; else data = KSZ8795_ID_LO; break; - case PHY_REG_AUTO_NEGOTIATION: + case MII_ADVERTISE: ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl); - data = PHY_AUTO_NEG_802_3; + data = ADVERTISE_CSMA; if (ctrl & PORT_AUTO_NEG_SYM_PAUSE) - data |= PHY_AUTO_NEG_SYM_PAUSE; + data |= ADVERTISE_PAUSE_CAP; if (ctrl & PORT_AUTO_NEG_100BTX_FD) - data |= PHY_AUTO_NEG_100BTX_FD; + data |= ADVERTISE_100FULL; if (ctrl & PORT_AUTO_NEG_100BTX) - data |= PHY_AUTO_NEG_100BTX; + data |= ADVERTISE_100HALF; if (ctrl & PORT_AUTO_NEG_10BT_FD) - data |= PHY_AUTO_NEG_10BT_FD; + data |= ADVERTISE_10FULL; if (ctrl & PORT_AUTO_NEG_10BT) - data |= PHY_AUTO_NEG_10BT; + data |= ADVERTISE_10HALF; break; - case PHY_REG_REMOTE_CAPABILITY: + case MII_LPA: ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link); - data = PHY_AUTO_NEG_802_3; + data = LPA_SLCT; if (link & PORT_REMOTE_SYM_PAUSE) - data |= PHY_AUTO_NEG_SYM_PAUSE; + data |= LPA_PAUSE_CAP; if (link & PORT_REMOTE_100BTX_FD) - data |= PHY_AUTO_NEG_100BTX_FD; + data |= LPA_100FULL; if (link & PORT_REMOTE_100BTX) - data |= PHY_AUTO_NEG_100BTX; + data |= LPA_100HALF; if (link & PORT_REMOTE_10BT_FD) - data |= PHY_AUTO_NEG_10BT_FD; + data |= LPA_10FULL; if (link & PORT_REMOTE_10BT) - data |= PHY_AUTO_NEG_10BT; - if (data & ~PHY_AUTO_NEG_802_3) - data |= PHY_REMOTE_ACKNOWLEDGE_NOT; + data |= LPA_10HALF; + if (data & ~LPA_SLCT) + data |= LPA_LPACK; break; default: processed = false; @@ -830,14 +831,14 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) u8 p = phy; switch (reg) { - case PHY_REG_CTRL: + case MII_BMCR: /* Do not support PHY reset function. */ - if (val & PHY_RESET) + if (val & BMCR_RESET) break; ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); data = speed; - if (val & PHY_HP_MDIX) + if (val & KSZ886X_BMCR_HP_MDIX) data |= PORT_HP_MDIX; else data &= ~PORT_HP_MDIX; @@ -846,12 +847,12 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); data = ctrl; if (ksz_is_ksz88x3(dev)) { - if ((val & PHY_AUTO_NEG_ENABLE)) + if ((val & BMCR_ANENABLE)) data |= PORT_AUTO_NEG_ENABLE; else data &= ~PORT_AUTO_NEG_ENABLE; } else { - if (!(val & PHY_AUTO_NEG_ENABLE)) + if (!(val & BMCR_ANENABLE)) data |= PORT_AUTO_NEG_DISABLE; else data &= ~PORT_AUTO_NEG_DISABLE; @@ -861,11 +862,11 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) data |= PORT_AUTO_NEG_DISABLE; } - if (val & PHY_SPEED_100MBIT) + if (val & BMCR_SPEED100) data |= PORT_FORCE_100_MBIT; else data &= ~PORT_FORCE_100_MBIT; - if (val & PHY_FULL_DUPLEX) + if (val & BMCR_FULLDPLX) data |= PORT_FORCE_FULL_DUPLEX; else data &= ~PORT_FORCE_FULL_DUPLEX; @@ -873,38 +874,38 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data); ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); data = restart; - if (val & PHY_LED_DISABLE) + if (val & KSZ886X_BMCR_DISABLE_LED) data |= PORT_LED_OFF; else data &= ~PORT_LED_OFF; - if (val & PHY_TRANSMIT_DISABLE) + if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) data |= PORT_TX_DISABLE; else data &= ~PORT_TX_DISABLE; - if (val & PHY_AUTO_NEG_RESTART) + if (val & BMCR_ANRESTART) data |= PORT_AUTO_NEG_RESTART; else data &= ~(PORT_AUTO_NEG_RESTART); - if (val & PHY_POWER_DOWN) + if (val & BMCR_PDOWN) data |= PORT_POWER_DOWN; else data &= ~PORT_POWER_DOWN; - if (val & PHY_AUTO_MDIX_DISABLE) + if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) data |= PORT_AUTO_MDIX_DISABLE; else data &= ~PORT_AUTO_MDIX_DISABLE; - if (val & PHY_FORCE_MDIX) + if (val & KSZ886X_BMCR_FORCE_MDI) data |= PORT_FORCE_MDIX; else data &= ~PORT_FORCE_MDIX; - if (val & PHY_LOOPBACK) + if (val & BMCR_LOOPBACK) data |= PORT_PHY_LOOPBACK; else data &= ~PORT_PHY_LOOPBACK; if (data != restart) ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], data); break; - case PHY_REG_AUTO_NEGOTIATION: + case MII_ADVERTISE: ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl); data = ctrl; data &= ~(PORT_AUTO_NEG_SYM_PAUSE | @@ -912,15 +913,15 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) PORT_AUTO_NEG_100BTX | PORT_AUTO_NEG_10BT_FD | PORT_AUTO_NEG_10BT); - if (val & PHY_AUTO_NEG_SYM_PAUSE) + if (val & ADVERTISE_PAUSE_CAP) data |= PORT_AUTO_NEG_SYM_PAUSE; - if (val & PHY_AUTO_NEG_100BTX_FD) + if (val & ADVERTISE_100FULL) data |= PORT_AUTO_NEG_100BTX_FD; - if (val & PHY_AUTO_NEG_100BTX) + if (val & ADVERTISE_100HALF) data |= PORT_AUTO_NEG_100BTX; - if (val & PHY_AUTO_NEG_10BT_FD) + if (val & ADVERTISE_10FULL) data |= PORT_AUTO_NEG_10BT_FD; - if (val & PHY_AUTO_NEG_10BT) + if (val & ADVERTISE_10HALF) data |= PORT_AUTO_NEG_10BT; if (data != ctrl) ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data); diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h index c2e52c40a54c..f925ddee5238 100644 --- a/drivers/net/dsa/microchip/ksz8795_reg.h +++ b/drivers/net/dsa/microchip/ksz8795_reg.h @@ -744,68 +744,6 @@ #define PORT_ACL_FORCE_DLR_MISS BIT(0) -#ifndef PHY_REG_CTRL -#define PHY_REG_CTRL 0 - -#define PHY_RESET BIT(15) -#define PHY_LOOPBACK BIT(14) -#define PHY_SPEED_100MBIT BIT(13) -#define PHY_AUTO_NEG_ENABLE BIT(12) -#define PHY_POWER_DOWN BIT(11) -#define PHY_MII_DISABLE BIT(10) -#define PHY_AUTO_NEG_RESTART BIT(9) -#define PHY_FULL_DUPLEX BIT(8) -#define PHY_COLLISION_TEST_NOT BIT(7) -#define PHY_HP_MDIX BIT(5) -#define PHY_FORCE_MDIX BIT(4) -#define PHY_AUTO_MDIX_DISABLE BIT(3) -#define PHY_REMOTE_FAULT_DISABLE BIT(2) -#define PHY_TRANSMIT_DISABLE BIT(1) -#define PHY_LED_DISABLE BIT(0) - -#define PHY_REG_STATUS 1 - -#define PHY_100BT4_CAPABLE BIT(15) -#define PHY_100BTX_FD_CAPABLE BIT(14) -#define PHY_100BTX_CAPABLE BIT(13) -#define PHY_10BT_FD_CAPABLE BIT(12) -#define PHY_10BT_CAPABLE BIT(11) -#define PHY_MII_SUPPRESS_CAPABLE_NOT BIT(6) -#define PHY_AUTO_NEG_ACKNOWLEDGE BIT(5) -#define PHY_REMOTE_FAULT BIT(4) -#define PHY_AUTO_NEG_CAPABLE BIT(3) -#define PHY_LINK_STATUS BIT(2) -#define PHY_JABBER_DETECT_NOT BIT(1) -#define PHY_EXTENDED_CAPABILITY BIT(0) - -#define PHY_REG_ID_1 2 -#define PHY_REG_ID_2 3 - -#define PHY_REG_AUTO_NEGOTIATION 4 - -#define PHY_AUTO_NEG_NEXT_PAGE_NOT BIT(15) -#define PHY_AUTO_NEG_REMOTE_FAULT_NOT BIT(13) -#define PHY_AUTO_NEG_SYM_PAUSE BIT(10) -#define PHY_AUTO_NEG_100BT4 BIT(9) -#define PHY_AUTO_NEG_100BTX_FD BIT(8) -#define PHY_AUTO_NEG_100BTX BIT(7) -#define PHY_AUTO_NEG_10BT_FD BIT(6) -#define PHY_AUTO_NEG_10BT BIT(5) -#define PHY_AUTO_NEG_SELECTOR 0x001F -#define PHY_AUTO_NEG_802_3 0x0001 - -#define PHY_REG_REMOTE_CAPABILITY 5 - -#define PHY_REMOTE_NEXT_PAGE_NOT BIT(15) -#define PHY_REMOTE_ACKNOWLEDGE_NOT BIT(14) -#define PHY_REMOTE_REMOTE_FAULT_NOT BIT(13) -#define PHY_REMOTE_SYM_PAUSE BIT(10) -#define PHY_REMOTE_100BTX_FD BIT(8) -#define PHY_REMOTE_100BTX BIT(7) -#define PHY_REMOTE_10BT_FD BIT(6) -#define PHY_REMOTE_10BT BIT(5) -#endif - #define KSZ8795_ID_HI 0x0022 #define KSZ8795_ID_LO 0x1550 #define KSZ8863_ID_LO 0x1430 diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index 3532bfe936f6..7945eb5e2fe8 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -25,6 +25,7 @@ #include <linux/crc32.h> #include <linux/sched.h> #include <linux/slab.h> +#include <linux/micrel_phy.h> /* DMA Registers */ @@ -271,84 +272,15 @@ #define KS884X_PHY_CTRL_OFFSET 0x00 -/* Mode Control Register */ -#define PHY_REG_CTRL 0 - -#define PHY_RESET 0x8000 -#define PHY_LOOPBACK 0x4000 -#define PHY_SPEED_100MBIT 0x2000 -#define PHY_AUTO_NEG_ENABLE 0x1000 -#define PHY_POWER_DOWN 0x0800 -#define PHY_MII_DISABLE 0x0400 -#define PHY_AUTO_NEG_RESTART 0x0200 -#define PHY_FULL_DUPLEX 0x0100 -#define PHY_COLLISION_TEST 0x0080 -#define PHY_HP_MDIX 0x0020 -#define PHY_FORCE_MDIX 0x0010 -#define PHY_AUTO_MDIX_DISABLE 0x0008 -#define PHY_REMOTE_FAULT_DISABLE 0x0004 -#define PHY_TRANSMIT_DISABLE 0x0002 -#define PHY_LED_DISABLE 0x0001 - #define KS884X_PHY_STATUS_OFFSET 0x02 -/* Mode Status Register */ -#define PHY_REG_STATUS 1 - -#define PHY_100BT4_CAPABLE 0x8000 -#define PHY_100BTX_FD_CAPABLE 0x4000 -#define PHY_100BTX_CAPABLE 0x2000 -#define PHY_10BT_FD_CAPABLE 0x1000 -#define PHY_10BT_CAPABLE 0x0800 -#define PHY_MII_SUPPRESS_CAPABLE 0x0040 -#define PHY_AUTO_NEG_ACKNOWLEDGE 0x0020 -#define PHY_REMOTE_FAULT 0x0010 -#define PHY_AUTO_NEG_CAPABLE 0x0008 -#define PHY_LINK_STATUS 0x0004 -#define PHY_JABBER_DETECT 0x0002 -#define PHY_EXTENDED_CAPABILITY 0x0001 - #define KS884X_PHY_ID_1_OFFSET 0x04 #define KS884X_PHY_ID_2_OFFSET 0x06 -/* PHY Identifier Registers */ -#define PHY_REG_ID_1 2 -#define PHY_REG_ID_2 3 - #define KS884X_PHY_AUTO_NEG_OFFSET 0x08 -/* Auto-Negotiation Advertisement Register */ -#define PHY_REG_AUTO_NEGOTIATION 4 - -#define PHY_AUTO_NEG_NEXT_PAGE 0x8000 -#define PHY_AUTO_NEG_REMOTE_FAULT 0x2000 -/* Not supported. */ -#define PHY_AUTO_NEG_ASYM_PAUSE 0x0800 -#define PHY_AUTO_NEG_SYM_PAUSE 0x0400 -#define PHY_AUTO_NEG_100BT4 0x0200 -#define PHY_AUTO_NEG_100BTX_FD 0x0100 -#define PHY_AUTO_NEG_100BTX 0x0080 -#define PHY_AUTO_NEG_10BT_FD 0x0040 -#define PHY_AUTO_NEG_10BT 0x0020 -#define PHY_AUTO_NEG_SELECTOR 0x001F -#define PHY_AUTO_NEG_802_3 0x0001 - -#define PHY_AUTO_NEG_PAUSE (PHY_AUTO_NEG_SYM_PAUSE | PHY_AUTO_NEG_ASYM_PAUSE) - #define KS884X_PHY_REMOTE_CAP_OFFSET 0x0A -/* Auto-Negotiation Link Partner Ability Register */ -#define PHY_REG_REMOTE_CAPABILITY 5 - -#define PHY_REMOTE_NEXT_PAGE 0x8000 -#define PHY_REMOTE_ACKNOWLEDGE 0x4000 -#define PHY_REMOTE_REMOTE_FAULT 0x2000 -#define PHY_REMOTE_SYM_PAUSE 0x0400 -#define PHY_REMOTE_100BTX_FD 0x0100 -#define PHY_REMOTE_100BTX 0x0080 -#define PHY_REMOTE_10BT_FD 0x0040 -#define PHY_REMOTE_10BT 0x0020 - /* P1VCT */ #define KS884X_P1VCT_P 0x04F0 #define KS884X_P1PHYCTRL_P 0x04F2 @@ -2886,15 +2818,6 @@ static void sw_block_addr(struct ksz_hw *hw) } } -#define PHY_LINK_SUPPORT \ - (PHY_AUTO_NEG_ASYM_PAUSE | \ - PHY_AUTO_NEG_SYM_PAUSE | \ - PHY_AUTO_NEG_100BT4 | \ - PHY_AUTO_NEG_100BTX_FD | \ - PHY_AUTO_NEG_100BTX | \ - PHY_AUTO_NEG_10BT_FD | \ - PHY_AUTO_NEG_10BT) - static inline void hw_r_phy_ctrl(struct ksz_hw *hw, int phy, u16 *data) { *data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET); @@ -3238,16 +3161,18 @@ static void determine_flow_ctrl(struct ksz_hw *hw, struct ksz_port *port, rx = tx = 0; if (port->force_link) rx = tx = 1; - if (remote & PHY_AUTO_NEG_SYM_PAUSE) { - if (local & PHY_AUTO_NEG_SYM_PAUSE) { + if (remote & LPA_PAUSE_CAP) { + if (local & ADVERTISE_PAUSE_CAP) { rx = tx = 1; - } else if ((remote & PHY_AUTO_NEG_ASYM_PAUSE) && - (local & PHY_AUTO_NEG_PAUSE) == - PHY_AUTO_NEG_ASYM_PAUSE) { + } else if ((remote & LPA_PAUSE_ASYM) && + (local & + (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) == + ADVERTISE_PAUSE_ASYM) { tx = 1; } - } else if (remote & PHY_AUTO_NEG_ASYM_PAUSE) { - if ((local & PHY_AUTO_NEG_PAUSE) == PHY_AUTO_NEG_PAUSE) + } else if (remote & LPA_PAUSE_ASYM) { + if ((local & (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) + == (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) rx = 1; } if (!hw->ksz_switch) @@ -3428,16 +3353,16 @@ static void port_force_link_speed(struct ksz_port *port) phy = KS884X_PHY_1_CTRL_OFFSET + p * PHY_CTRL_INTERVAL; hw_r_phy_ctrl(hw, phy, &data); - data &= ~PHY_AUTO_NEG_ENABLE; + data &= ~BMCR_ANENABLE; if (10 == port->speed) - data &= ~PHY_SPEED_100MBIT; + data &= ~BMCR_SPEED100; else if (100 == port->speed) - data |= PHY_SPEED_100MBIT; + data |= BMCR_SPEED100; if (1 == port->duplex) - data &= ~PHY_FULL_DUPLEX; + data &= ~BMCR_FULLDPLX; else if (2 == port->duplex) - data |= PHY_FULL_DUPLEX; + data |= BMCR_FULLDPLX; hw_w_phy_ctrl(hw, phy, data); } } diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 416ee6dd2574..b03e2afcb53f 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -45,4 +45,17 @@ #define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW 0x104 #define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW 0x105 +/* Device specific MII_BMCR (Reg 0) bits */ +/* 1 = HP Auto MDI/MDI-X mode, 0 = Microchip Auto MDI/MDI-X mode */ +#define KSZ886X_BMCR_HP_MDIX BIT(5) +/* 1 = Force MDI (transmit on RXP/RXM pins), 0 = Normal operation + * (transmit on TXP/TXM pins) + */ +#define KSZ886X_BMCR_FORCE_MDI BIT(4) +/* 1 = Disable auto MDI-X */ +#define KSZ886X_BMCR_DISABLE_AUTO_MDIX BIT(3) +#define KSZ886X_BMCR_DISABLE_FAR_END_FAULT BIT(2) +#define KSZ886X_BMCR_DISABLE_TRANSMIT BIT(1) +#define KSZ886X_BMCR_DISABLE_LED BIT(0) + #endif /* _MICREL_PHY_H */ |