summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-07-05 23:42:16 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-07-05 23:42:16 +0300
commiteed0218e8cae9fcd186c30e9fcf5fe46a87e056e (patch)
tree799a1360b947a56d05a60433fdf60a96bf3b3348
parent3f8b8e7dbd79086ad48fcff33de9399f3da66a69 (diff)
parent6f746d485fb9188dc67dce7de63d21f0c28a1f2e (diff)
downloadlinux-eed0218e8cae9fcd186c30e9fcf5fe46a87e056e.tar.xz
Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
-rw-r--r--Documentation/ABI/stable/sysfs-driver-w1_ds243813
-rw-r--r--Documentation/ABI/testing/debugfs-driver-habanalabs8
-rw-r--r--Documentation/ABI/testing/sysfs-class-spi-eeprom19
-rw-r--r--Documentation/devicetree/bindings/eeprom/at25.yaml31
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-sm5502.txt21
-rw-r--r--Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml52
-rw-r--r--Documentation/devicetree/bindings/fpga/fpga-region.txt22
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml12
-rw-r--r--Documentation/devicetree/bindings/misc/eeprom-93xx46.txt3
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie.txt24
-rw-r--r--Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml5
-rw-r--r--Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml1
-rw-r--r--Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml11
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml27
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt24
-rw-r--r--Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml53
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml79
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt52
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml81
-rw-r--r--Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml56
-rw-r--r--Documentation/fpga/dfl.rst4
-rw-r--r--Documentation/userspace-api/accelerators/ocxl.rst2
-rw-r--r--Documentation/w1/slaves/w1_ds2438.rst19
-rw-r--r--MAINTAINERS4
-rw-r--r--arch/sparc/include/asm/vio.h2
-rw-r--r--arch/sparc/kernel/ds.c6
-rw-r--r--arch/sparc/kernel/vio.c4
-rw-r--r--drivers/accessibility/braille/braille_console.c3
-rw-r--r--drivers/accessibility/speakup/i18n.c7
-rw-r--r--drivers/accessibility/speakup/i18n.h9
-rw-r--r--drivers/accessibility/speakup/main.c4
-rw-r--r--drivers/block/sunvdc.c3
-rw-r--r--drivers/bus/fsl-mc/dprc-driver.c8
-rw-r--r--drivers/bus/fsl-mc/dprc.c4
-rw-r--r--drivers/bus/fsl-mc/fsl-mc-allocator.c10
-rw-r--r--drivers/bus/fsl-mc/fsl-mc-bus.c19
-rw-r--r--drivers/bus/fsl-mc/fsl-mc-msi.c2
-rw-r--r--drivers/bus/fsl-mc/mc-io.c6
-rw-r--r--drivers/bus/fsl-mc/mc-sys.c19
-rw-r--r--drivers/bus/mhi/core/pm.c19
-rw-r--r--drivers/bus/mhi/pci_generic.c5
-rw-r--r--drivers/char/Kconfig21
-rw-r--r--drivers/char/Makefile3
-rw-r--r--drivers/char/hpet.c4
-rw-r--r--drivers/char/hw_random/pseries-rng.c2
-rw-r--r--drivers/char/mem.c1
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c7
-rw-r--r--drivers/char/pcmcia/cm4040_cs.c3
-rw-r--r--drivers/char/pcmcia/scr24x_cs.c1
-rw-r--r--drivers/char/raw.c362
-rw-r--r--drivers/char/xillybus/Kconfig22
-rw-r--r--drivers/char/xillybus/Makefile2
-rw-r--r--drivers/char/xillybus/xillybus.h10
-rw-r--r--drivers/char/xillybus/xillybus_class.c262
-rw-r--r--drivers/char/xillybus/xillybus_class.h30
-rw-r--r--drivers/char/xillybus/xillybus_core.c180
-rw-r--r--drivers/char/xillybus/xillybus_of.c1
-rw-r--r--drivers/char/xillybus/xillybus_pcie.c1
-rw-r--r--drivers/char/xillybus/xillyusb.c2259
-rw-r--r--drivers/comedi/drivers/comedi_8254.c3
-rw-r--r--drivers/comedi/drivers/comedi_isadma.c2
-rw-r--r--drivers/comedi/drivers/ni_routes.c7
-rw-r--r--drivers/comedi/drivers/ni_routes.h1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes.h1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/all.h1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6070e.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6220.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6221.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6229.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6251.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6254.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6259.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6534.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6602.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6713.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6723.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6733.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6030e.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6224.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6225.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6251.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6733.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6251.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6535.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6738.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_route_values.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_route_values.h1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_route_values/all.h1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_route_values/ni_660x.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_route_values/ni_eseries.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/ni_route_values/ni_mseries.c1
-rw-r--r--drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c1
-rwxr-xr-xdrivers/comedi/drivers/ni_routing/tools/convert_csv_to_c.py7
-rwxr-xr-xdrivers/comedi/drivers/ni_routing/tools/convert_py_to_csv.py1
-rw-r--r--drivers/comedi/drivers/ni_routing/tools/csv_collection.py1
-rwxr-xr-xdrivers/comedi/drivers/ni_routing/tools/make_blank_csv.py1
-rw-r--r--drivers/comedi/drivers/ni_routing/tools/ni_names.py1
-rw-r--r--drivers/comedi/drivers/ni_tio.c12
-rw-r--r--drivers/comedi/drivers/tests/comedi_example_test.c1
-rw-r--r--drivers/comedi/drivers/tests/ni_routes_test.c1
-rw-r--r--drivers/comedi/drivers/tests/unittest.h1
-rw-r--r--drivers/eisa/eisa-bus.c23
-rw-r--r--drivers/extcon/Kconfig2
-rw-r--r--drivers/extcon/extcon-intel-mrfld.c9
-rw-r--r--drivers/extcon/extcon-max8997.c1
-rw-r--r--drivers/extcon/extcon-sm5502.c212
-rw-r--r--drivers/extcon/extcon-sm5502.h82
-rw-r--r--drivers/firewire/nosy.c43
-rw-r--r--drivers/firmware/stratix10-svc.c22
-rw-r--r--drivers/fpga/Kconfig4
-rw-r--r--drivers/fpga/altera-pr-ip-core.c10
-rw-r--r--drivers/fpga/fpga-bridge.c40
-rw-r--r--drivers/fpga/fpga-mgr.c42
-rw-r--r--drivers/fpga/fpga-region.c30
-rw-r--r--drivers/fpga/machxo2-spi.c2
-rw-r--r--drivers/fpga/of-fpga-region.c8
-rw-r--r--drivers/fpga/stratix10-soc.c3
-rw-r--r--drivers/fsi/fsi-core.c4
-rw-r--r--drivers/fsi/fsi-master-aspeed.c33
-rw-r--r--drivers/fsi/fsi-master-ast-cf.c2
-rw-r--r--drivers/fsi/fsi-master-gpio.c1
-rw-r--r--drivers/fsi/fsi-occ.c12
-rw-r--r--drivers/fsi/fsi-sbefifo.c10
-rw-r--r--drivers/fsi/fsi-scom.c105
-rw-r--r--drivers/hwmon/occ/common.c7
-rw-r--r--drivers/hwtracing/coresight/coresight-core.c11
-rw-r--r--drivers/hwtracing/coresight/coresight-etm4x-core.c5
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etf.c2
-rw-r--r--drivers/hwtracing/intel_th/core.c29
-rw-r--r--drivers/hwtracing/intel_th/gth.c16
-rw-r--r--drivers/hwtracing/intel_th/intel_th.h3
-rw-r--r--drivers/hwtracing/intel_th/msu.c48
-rw-r--r--drivers/interconnect/qcom/Kconfig9
-rw-r--r--drivers/interconnect/qcom/Makefile2
-rw-r--r--drivers/interconnect/qcom/sc7280.c1938
-rw-r--r--drivers/interconnect/qcom/sc7280.h154
-rw-r--r--drivers/ipack/carriers/tpci200.c9
-rw-r--r--drivers/ipack/carriers/tpci200.h4
-rw-r--r--drivers/ipack/devices/ipoctal.c4
-rw-r--r--drivers/ipack/devices/ipoctal.h6
-rw-r--r--drivers/mcb/mcb-lpc.c13
-rw-r--r--drivers/misc/bcm-vk/bcm_vk_msg.c6
-rw-r--r--drivers/misc/bcm-vk/bcm_vk_msg.h2
-rw-r--r--drivers/misc/cardreader/alcor_pci.c8
-rw-r--r--drivers/misc/cxl/file.c5
-rw-r--r--drivers/misc/eeprom/Kconfig5
-rw-r--r--drivers/misc/eeprom/at25.c158
-rw-r--r--drivers/misc/eeprom/ee1004.c223
-rw-r--r--drivers/misc/eeprom/eeprom_93xx46.c90
-rw-r--r--drivers/misc/eeprom/idt_89hpesx.c41
-rw-r--r--drivers/misc/habanalabs/common/command_submission.c81
-rw-r--r--drivers/misc/habanalabs/common/context.c9
-rw-r--r--drivers/misc/habanalabs/common/debugfs.c5
-rw-r--r--drivers/misc/habanalabs/common/device.c82
-rw-r--r--drivers/misc/habanalabs/common/firmware_if.c1792
-rw-r--r--drivers/misc/habanalabs/common/habanalabs.h280
-rw-r--r--drivers/misc/habanalabs/common/habanalabs_drv.c24
-rw-r--r--drivers/misc/habanalabs/common/habanalabs_ioctl.c23
-rw-r--r--drivers/misc/habanalabs/common/hw_queue.c42
-rw-r--r--drivers/misc/habanalabs/common/irq.c24
-rw-r--r--drivers/misc/habanalabs/common/memory.c22
-rw-r--r--drivers/misc/habanalabs/common/mmu/mmu.c14
-rw-r--r--drivers/misc/habanalabs/common/pci/pci.c34
-rw-r--r--drivers/misc/habanalabs/common/sysfs.c2
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi.c1013
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudiP.h1
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi_coresight.c6
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi_security.c15
-rw-r--r--drivers/misc/habanalabs/goya/goya.c251
-rw-r--r--drivers/misc/habanalabs/goya/goyaP.h2
-rw-r--r--drivers/misc/habanalabs/goya/goya_coresight.c2
-rw-r--r--drivers/misc/habanalabs/include/common/cpucp_if.h45
-rw-r--r--drivers/misc/habanalabs/include/common/hl_boot_if.h184
-rw-r--r--drivers/misc/habanalabs/include/gaudi/gaudi_async_events.h14
-rw-r--r--drivers/misc/habanalabs/include/gaudi/gaudi_async_ids_map_extended.h31
-rw-r--r--drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h46
-rw-r--r--drivers/misc/habanalabs/include/gaudi/gaudi_masks.h15
-rw-r--r--drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h10
-rw-r--r--drivers/misc/hpilo.c10
-rw-r--r--drivers/misc/hpilo.h3
-rw-r--r--drivers/misc/ibmasm/module.c5
-rw-r--r--drivers/misc/ibmasm/remote.h2
-rw-r--r--drivers/misc/lkdtm/bugs.c11
-rw-r--r--drivers/misc/lkdtm/cfi.c3
-rw-r--r--drivers/misc/lkdtm/core.c58
-rw-r--r--drivers/misc/lkdtm/fortify.c3
-rw-r--r--drivers/misc/lkdtm/heap.c97
-rw-r--r--drivers/misc/lkdtm/lkdtm.h46
-rw-r--r--drivers/misc/lkdtm/stackleak.c4
-rw-r--r--drivers/misc/lkdtm/usercopy.c7
-rw-r--r--drivers/misc/mei/bus-fixup.c2
-rw-r--r--drivers/misc/mei/client.c22
-rw-r--r--drivers/misc/mei/hbm.c2
-rw-r--r--drivers/misc/mei/hdcp/Kconfig1
-rw-r--r--drivers/misc/mei/hw-me.c4
-rw-r--r--drivers/misc/mei/hw.h28
-rw-r--r--drivers/misc/mei/interrupt.c23
-rw-r--r--drivers/misc/mei/main.c4
-rw-r--r--drivers/misc/mei/pci-txe.c2
-rw-r--r--drivers/misc/pvpanic/pvpanic-mmio.c17
-rw-r--r--drivers/misc/pvpanic/pvpanic-pci.c22
-rw-r--r--drivers/misc/pvpanic/pvpanic.c33
-rw-r--r--drivers/misc/pvpanic/pvpanic.h3
-rw-r--r--drivers/misc/uacce/uacce.c11
-rw-r--r--drivers/misc/vmw_vmci/vmci_context.c2
-rw-r--r--drivers/misc/xilinx_sdfec.c3
-rw-r--r--drivers/net/ethernet/sun/ldmvsw.c4
-rw-r--r--drivers/net/ethernet/sun/sunvnet.c3
-rw-r--r--drivers/nvmem/core.c23
-rw-r--r--drivers/nvmem/qfprom.c9
-rw-r--r--drivers/nvmem/sprd-efuse.c2
-rw-r--r--drivers/nvmem/sunxi_sid.c1
-rw-r--r--drivers/parport/probe.c11
-rw-r--r--drivers/phy/Kconfig9
-rw-r--r--drivers/phy/Makefile1
-rw-r--r--drivers/phy/broadcom/phy-bcm-ns-usb3.c4
-rw-r--r--drivers/phy/marvell/phy-mmp3-hsic.c4
-rw-r--r--drivers/phy/mediatek/phy-mtk-hdmi.c4
-rw-r--r--drivers/phy/mediatek/phy-mtk-mipi-dsi.c4
-rw-r--r--drivers/phy/phy-can-transceiver.c146
-rw-r--r--drivers/phy/phy-core-mipi-dphy.c2
-rw-r--r--drivers/phy/phy-core.c16
-rw-r--r--drivers/phy/phy-xgene.c3
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.c315
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.h189
-rw-r--r--drivers/phy/ralink/Kconfig2
-rw-r--r--drivers/phy/ralink/phy-mt7621-pci.c37
-rw-r--r--drivers/phy/rockchip/Kconfig9
-rw-r--r--drivers/phy/rockchip/Makefile1
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-csidphy.c459
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-hdmi.c4
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-usb2.c44
-rw-r--r--drivers/phy/socionext/phy-uniphier-pcie.c11
-rw-r--r--drivers/phy/st/phy-stm32-usbphyc.c31
-rw-r--r--drivers/phy/ti/phy-dm816x-usb.c17
-rw-r--r--drivers/phy/ti/phy-twl4030-usb.c6
-rw-r--r--drivers/pnp/card.c7
-rw-r--r--drivers/pnp/driver.c9
-rw-r--r--drivers/pnp/isapnp/compat.c1
-rw-r--r--drivers/pnp/manager.c7
-rw-r--r--drivers/pnp/support.c1
-rw-r--r--drivers/siox/siox-bus-gpio.c19
-rw-r--r--drivers/soundwire/Kconfig1
-rw-r--r--drivers/soundwire/bus.c163
-rw-r--r--drivers/soundwire/cadence_master.c21
-rw-r--r--drivers/soundwire/cadence_master.h3
-rw-r--r--drivers/soundwire/dmi-quirks.c2
-rw-r--r--drivers/soundwire/generic_bandwidth_allocation.c14
-rw-r--r--drivers/soundwire/intel.c56
-rw-r--r--drivers/soundwire/intel.h14
-rw-r--r--drivers/soundwire/intel_init.c232
-rw-r--r--drivers/soundwire/slave.c4
-rw-r--r--drivers/soundwire/stream.c13
-rw-r--r--drivers/tty/vcc.c4
-rw-r--r--drivers/uio/Kconfig2
-rw-r--r--drivers/uio/uio_aec.c2
-rw-r--r--drivers/uio/uio_pci_generic.c32
-rw-r--r--drivers/video/fbdev/Kconfig1
-rw-r--r--drivers/virt/nitro_enclaves/ne_pci_dev.c2
-rw-r--r--drivers/visorbus/visorchipset.c6
-rw-r--r--drivers/w1/masters/ds2482.c94
-rw-r--r--drivers/w1/slaves/w1_ds2438.c122
-rw-r--r--drivers/w1/slaves/w1_therm.c5
-rw-r--r--drivers/watchdog/mei_wdt.c4
-rw-r--r--fs/block_dev.c6
-rw-r--r--include/dt-bindings/interconnect/qcom,sc7280.h165
-rw-r--r--include/linux/eeprom_93xx46.h3
-rw-r--r--include/linux/fpga/altera-pr-ip-core.h1
-rw-r--r--include/linux/fpga/fpga-bridge.h2
-rw-r--r--include/linux/fpga/fpga-mgr.h2
-rw-r--r--include/linux/fs.h3
-rw-r--r--include/linux/mcb.h2
-rw-r--r--include/linux/nvmem-provider.h1
-rw-r--r--include/linux/phy/phy.h2
-rw-r--r--include/linux/soundwire/sdw.h5
-rw-r--r--include/linux/soundwire/sdw_intel.h6
-rw-r--r--include/linux/stm.h2
-rw-r--r--include/linux/sysfs.h6
-rw-r--r--include/uapi/linux/raw.h17
-rw-r--r--include/uapi/misc/habanalabs.h13
-rw-r--r--lib/dynamic_debug.c6
-rw-r--r--sound/soc/intel/boards/sof_sdw.c4
-rw-r--r--tools/testing/selftests/lkdtm/config7
-rwxr-xr-xtools/testing/selftests/lkdtm/run.sh12
-rwxr-xr-xtools/testing/selftests/lkdtm/stack-entropy.sh1
-rw-r--r--tools/testing/selftests/lkdtm/tests.txt11
287 files changed, 11663 insertions, 2814 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-w1_ds2438 b/Documentation/ABI/stable/sysfs-driver-w1_ds2438
new file mode 100644
index 000000000000..d2e7681cc287
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-w1_ds2438
@@ -0,0 +1,13 @@
+What: /sys/bus/w1/devices/.../page1
+Date: April 2021
+Contact: Luiz Sampaio <sampaio.ime@gmail.com>
+Description: read the contents of the page1 of the DS2438
+ see Documentation/w1/slaves/w1_ds2438.rst for detailed information
+Users: any user space application which wants to communicate with DS2438
+
+What: /sys/bus/w1/devices/.../offset
+Date: April 2021
+Contact: Luiz Sampaio <sampaio.ime@gmail.com>
+Description: write the contents to the offset register of the DS2438
+ see Documentation/w1/slaves/w1_ds2438.rst for detailed information
+Users: any user space application which wants to communicate with DS2438
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
index e89c6351503c..a5c28f606865 100644
--- a/Documentation/ABI/testing/debugfs-driver-habanalabs
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -207,6 +207,14 @@ Contact: ogabbay@kernel.org
Description: Sets the PCI power state. Valid values are "1" for D0 and "2"
for D3Hot
+What: /sys/kernel/debug/habanalabs/hl<n>/skip_reset_on_timeout
+Date: Jun 2021
+KernelVersion: 5.13
+Contact: ynudelman@habana.ai
+Description: Sets the skip reset on timeout option for the device. Value of
+ "0" means device will be reset in case some CS has timed out,
+ otherwise it will not be reset.
+
What: /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
Date: Mar 2020
KernelVersion: 5.6
diff --git a/Documentation/ABI/testing/sysfs-class-spi-eeprom b/Documentation/ABI/testing/sysfs-class-spi-eeprom
new file mode 100644
index 000000000000..1ff757982079
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-spi-eeprom
@@ -0,0 +1,19 @@
+What: /sys/class/spi_master/spi<bus>/spi<bus>.<dev>/fram
+Date: June 2021
+KernelVersion: 5.14
+Contact: Jiri Prchal <jiri.prchal@aksignal.cz>
+Description:
+ Contains the FRAM binary data. Same as EEPROM, just another file
+ name to indicate that it employs ferroelectric process.
+ It performs write operations at bus speed - no write delays.
+
+What: /sys/class/spi_master/spi<bus>/spi<bus>.<dev>/sernum
+Date: May 2021
+KernelVersion: 5.14
+Contact: Jiri Prchal <jiri.prchal@aksignal.cz>
+Description:
+ Contains the serial number of the Cypress FRAM (FM25VN) if it is
+ present. It will be displayed as a 8 byte hex string, as read
+ from the device.
+
+ This is a read-only attribute.
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index 6a2dc8b3ed14..fbf99e346966 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -4,14 +4,16 @@
$id: "http://devicetree.org/schemas/eeprom/at25.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-title: SPI EEPROMs compatible with Atmel's AT25
+title: SPI EEPROMs or FRAMs compatible with Atmel's AT25
maintainers:
- Christian Eggers <ceggers@arri.de>
properties:
$nodename:
- pattern: "^eeprom@[0-9a-f]{1,2}$"
+ anyOf:
+ - pattern: "^eeprom@[0-9a-f]{1,2}$"
+ - pattern: "^fram@[0-9a-f]{1,2}$"
# There are multiple known vendors who manufacture EEPROM chips compatible
# with Atmel's AT25. The compatible string requires two items where the
@@ -31,6 +33,7 @@ properties:
- microchip,25lc040
- st,m95m02
- st,m95256
+ - cypress,fm25
- const: atmel,at25
@@ -47,7 +50,7 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
description:
- Size of the eeprom page.
+ Size of the eeprom page. FRAMs don't have pages.
size:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -100,9 +103,19 @@ required:
- compatible
- reg
- spi-max-frequency
- - pagesize
- - size
- - address-width
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: cypress,fm25
+ then:
+ required:
+ - pagesize
+ - size
+ - address-width
additionalProperties: false
@@ -125,4 +138,10 @@ examples:
size = <32768>;
address-width = <16>;
};
+
+ fram@1 {
+ compatible = "cypress,fm25", "atmel,at25";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
deleted file mode 100644
index fc3888e09549..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-
-* SM5502 MUIC (Micro-USB Interface Controller) device
-
-The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
-which can detect the state of external accessory when external accessory is
-attached or detached and button is pressed or released. It is interfaced to
-the host controller using an I2C interface.
-
-Required properties:
-- compatible: Should be "siliconmitus,sm5502-muic"
-- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25
-- interrupts: Interrupt specifiers for detection interrupt sources.
-
-Example:
-
- sm5502@25 {
- compatible = "siliconmitus,sm5502-muic";
- interrupt-parent = <&gpx1>;
- interrupts = <5 0>;
- reg = <0x25>;
- };
diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
new file mode 100644
index 000000000000..fd2e55088888
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/siliconmitus,sm5502-muic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SM5502/SM5504 MUIC (Micro-USB Interface Controller) device
+
+maintainers:
+ - Chanwoo Choi <cw00.choi@samsung.com>
+
+description:
+ The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
+ which can detect the state of external accessory when external accessory is
+ attached or detached and button is pressed or released. It is interfaced to
+ the host controller using an I2C interface.
+
+properties:
+ compatible:
+ enum:
+ - siliconmitus,sm5502-muic
+ - siliconmitus,sm5504-muic
+
+ reg:
+ maxItems: 1
+ description: I2C slave address of the device. Usually 0x25 for SM5502,
+ 0x14 for SM5504.
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ extcon@25 {
+ compatible = "siliconmitus,sm5502-muic";
+ reg = <0x25>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index d787d57491a1..7d3515264838 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -38,7 +38,7 @@ Partial Reconfiguration (PR)
Partial Reconfiguration Region (PRR)
* Also called a "reconfigurable partition"
- * A PRR is a specific section of a FPGA reserved for reconfiguration.
+ * A PRR is a specific section of an FPGA reserved for reconfiguration.
* A base (or static) FPGA image may create a set of PRR's that later may
be independently reprogrammed many times.
* The size and specific location of each PRR is fixed.
@@ -105,7 +105,7 @@ reprogrammed independently while the rest of the system continues to function.
Sequence
========
-When a DT overlay that targets a FPGA Region is applied, the FPGA Region will
+When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
do the following:
1. Disable appropriate FPGA bridges.
@@ -134,8 +134,8 @@ The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
FPGA while an operating system is running.
An FPGA Region that exists in the live Device Tree reflects the current state.
-If the live tree shows a "firmware-name" property or child nodes under a FPGA
-Region, the FPGA already has been programmed. A DTO that targets a FPGA Region
+If the live tree shows a "firmware-name" property or child nodes under an FPGA
+Region, the FPGA already has been programmed. A DTO that targets an FPGA Region
and adds the "firmware-name" property is taken as a request to reprogram the
FPGA. After reprogramming is successful, the overlay is accepted into the live
tree.
@@ -152,9 +152,9 @@ These FPGA regions are children of FPGA bridges which are then children of the
base FPGA region. The "Full Reconfiguration to add PRR's" example below shows
this.
-If an FPGA Region does not specify a FPGA Manager, it will inherit the FPGA
+If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
Manager specified by its ancestor FPGA Region. This supports both the case
-where the same FPGA Manager is used for all of a FPGA as well the case where
+where the same FPGA Manager is used for all of an FPGA as well the case where
a different FPGA Manager is used for each region.
FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents
@@ -166,7 +166,7 @@ within the static image of the FPGA.
Required properties:
- compatible : should contain "fpga-region"
- fpga-mgr : should contain a phandle to an FPGA Manager. Child FPGA Regions
- inherit this property from their ancestor regions. A fpga-mgr property
+ inherit this property from their ancestor regions. An fpga-mgr property
in a region will override any inherited FPGA manager.
- #address-cells, #size-cells, ranges : must be present to handle address space
mapping for child nodes.
@@ -175,12 +175,12 @@ Optional properties:
- firmware-name : should contain the name of an FPGA image file located on the
firmware search path. If this property shows up in a live device tree
it indicates that the FPGA has already been programmed with this image.
- If this property is in an overlay targeting a FPGA region, it is a
+ If this property is in an overlay targeting an FPGA region, it is a
request to program the FPGA with that image.
- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
controlled during FPGA programming along with the parent FPGA bridge.
This property is optional if the FPGA Manager handles the bridges.
- If the fpga-region is the child of a fpga-bridge, the list should not
+ If the fpga-region is the child of an fpga-bridge, the list should not
contain the parent bridge.
- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
otherwise full reconfiguration is done.
@@ -279,7 +279,7 @@ Supported Use Models
In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some
-uses are specific to a FPGA device.
+uses are specific to an FPGA device.
* No FPGA Bridges
In this case, the FPGA Manager which programs the FPGA also handles the
@@ -300,7 +300,7 @@ uses are specific to a FPGA device.
bridges need to exist in the FPGA that can gate the buses going to each FPGA
region while the buses are enabled for other sections. Before any partial
reconfiguration can be done, a base FPGA image must be loaded which includes
- PRR's with FPGA bridges. The device tree should have a FPGA region for each
+ PRR's with FPGA bridges. The device tree should have an FPGA region for each
PRR.
Device Tree Examples
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 36c955965d90..5accc0d113be 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -37,6 +37,18 @@ properties:
- qcom,sc7180-npu-noc
- qcom,sc7180-qup-virt
- qcom,sc7180-system-noc
+ - qcom,sc7280-aggre1-noc
+ - qcom,sc7280-aggre2-noc
+ - qcom,sc7280-clk-virt
+ - qcom,sc7280-cnoc2
+ - qcom,sc7280-cnoc3
+ - qcom,sc7280-dc-noc
+ - qcom,sc7280-gem-noc
+ - qcom,sc7280-lpass-ag-noc
+ - qcom,sc7280-mc-virt
+ - qcom,sc7280-mmss-noc
+ - qcom,sc7280-nsp-noc
+ - qcom,sc7280-system-noc
- qcom,sdm845-aggre1-noc
- qcom,sdm845-aggre2-noc
- qcom,sdm845-config-noc
diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
index 7b636b7a8311..72ea0af368d4 100644
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
+++ b/Documentation/devicetree/bindings/misc/eeprom-93xx46.txt
@@ -2,7 +2,10 @@ EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
Required properties:
- compatible : shall be one of:
+ "atmel,at93c46"
"atmel,at93c46d"
+ "atmel,at93c56"
+ "atmel,at93c66"
"eeprom-93xx46"
"microchip,93lc46b"
- data-size : number of data bits per word (either 8 or 16)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 0da458a051b6..25f4def468bf 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -14,6 +14,7 @@
- "qcom,pcie-qcs404" for qcs404
- "qcom,pcie-sdm845" for sdm845
- "qcom,pcie-sm8250" for sm8250
+ - "qcom,pcie-ipq6018" for ipq6018
- reg:
Usage: required
@@ -124,6 +125,16 @@
- "aux" Auxiliary clock
- clock-names:
+ Usage: required for ipq6018
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "iface" PCIe to SysNOC BIU clock
+ - "axi_m" AXI Master clock
+ - "axi_s" AXI Slave clock
+ - "axi_bridge" AXI bridge clock
+ - "rchng"
+
+- clock-names:
Usage: required for qcs404
Value type: <stringlist>
Definition: Should contain the following entries
@@ -210,6 +221,19 @@
- "axi_m_sticky" AXI Master Sticky reset
- reset-names:
+ Usage: required for ipq6018
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "pipe" PIPE reset
+ - "sleep" Sleep reset
+ - "sticky" Core Sticky reset
+ - "axi_m" AXI Master reset
+ - "axi_s" AXI Slave reset
+ - "ahb" AHB Reset
+ - "axi_m_sticky" AXI Master Sticky reset
+ - "axi_s_sticky" AXI Slave Sticky reset
+
+- reset-names:
Usage: required for qcs404
Value type: <stringlist>
Definition: Should contain the following entries
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
index 0ccaded3f245..29d4123323c2 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
@@ -16,6 +16,9 @@ properties:
reg:
maxItems: 1
+ clocks:
+ maxItems: 1
+
"#phy-cells":
const: 1
description: selects if the phy is dual-ported
@@ -23,6 +26,7 @@ properties:
required:
- compatible
- reg
+ - clocks
- "#phy-cells"
additionalProperties: false
@@ -32,5 +36,6 @@ examples:
pcie0_phy: pcie-phy@1e149000 {
compatible = "mediatek,mt7621-pci-phy";
reg = <0x1e149000 0x0700>;
+ clocks = <&sysc 0>;
#phy-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
index fb29ad807b68..a5b027a6e70f 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -14,6 +14,7 @@ properties:
enum:
- rockchip,px30-usb2phy
- rockchip,rk3228-usb2phy
+ - rockchip,rk3308-usb2phy
- rockchip,rk3328-usb2phy
- rockchip,rk3366-usb2phy
- rockchip,rk3399-usb2phy
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 018cc1246ee1..3329f1d33a4f 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -74,6 +74,13 @@ patternProperties:
"#phy-cells":
enum: [ 0x0, 0x1 ]
+ connector:
+ type: object
+ allOf:
+ - $ref: ../connector/usb-connector.yaml
+ properties:
+ vbus-supply: true
+
allOf:
- if:
properties:
@@ -130,6 +137,10 @@ examples:
reg = <0>;
phy-supply = <&vdd_usb>;
#phy-cells = <0>;
+ connector {
+ compatible = "usb-a-connector";
+ vbus-supply = <&vbus_sw>;
+ };
};
usbphyc_port1: usb-phy@1 {
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index a2de5202eb5e..f0497b8623ad 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -17,6 +17,7 @@ description:
properties:
compatible:
enum:
+ - qcom,ipq6018-qmp-pcie-phy
- qcom,ipq8074-qmp-pcie-phy
- qcom,ipq8074-qmp-usb3-phy
- qcom,msm8996-qmp-pcie-phy
@@ -45,6 +46,7 @@ properties:
- qcom,sm8350-qmp-ufs-phy
- qcom,sm8350-qmp-usb3-phy
- qcom,sm8350-qmp-usb3-uni-phy
+ - qcom,sdx55-qmp-pcie-phy
- qcom,sdx55-qmp-usb3-uni-phy
reg:
@@ -300,8 +302,33 @@ allOf:
compatible:
contains:
enum:
+ - qcom,ipq6018-qmp-pcie-phy
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Phy aux clock.
+ - description: Phy config clock.
+ clock-names:
+ items:
+ - const: aux
+ - const: cfg_ahb
+ resets:
+ items:
+ - description: reset of phy block.
+ - description: phy common block reset.
+ reset-names:
+ items:
+ - const: phy
+ - const: common
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
- qcom,sdm845-qhp-pcie-phy
- qcom,sdm845-qmp-pcie-phy
+ - qcom,sdx55-qmp-pcie-phy
- qcom,sm8250-qmp-gen3x1-pcie-phy
- qcom,sm8250-qmp-gen3x2-pcie-phy
- qcom,sm8250-qmp-modem-pcie-phy
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt
deleted file mode 100644
index 63853b35e083..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Renesas R-Car generation 3 PCIe PHY
-
-This file provides information on what the device node for the R-Car
-generation 3 PCIe PHY contains.
-
-Required properties:
-- compatible: "renesas,r8a77980-pcie-phy" if the device is a part of the
- R8A77980 SoC.
-- reg: offset and length of the register block.
-- clocks: clock phandle and specifier pair.
-- power-domains: power domain phandle and specifier pair.
-- resets: reset phandle and specifier pair.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Example (R-Car V3H):
-
- pcie-phy@e65d0000 {
- compatible = "renesas,r8a77980-pcie-phy";
- reg = <0 0xe65d0000 0 0x8000>;
- #phy-cells = <0>;
- clocks = <&cpg CPG_MOD 319>;
- power-domains = <&sysc 32>;
- resets = <&cpg 319>;
- };
diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml
new file mode 100644
index 000000000000..247ef7c47cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,rcar-gen3-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Generation 3 PCIe PHY
+
+maintainers:
+ - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+ compatible:
+ const: renesas,r8a77980-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - resets
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a77980-cpg-mssr.h>
+ #include <dt-bindings/power/r8a77980-sysc.h>
+
+ pcie-phy@e65d0000 {
+ compatible = "renesas,r8a77980-pcie-phy";
+ reg = <0xe65d0000 0x8000>;
+ #phy-cells = <0>;
+ clocks = <&cpg CPG_MOD 319>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
new file mode 100644
index 000000000000..bb4a2e4b8ab0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP wich
+ connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-csi-dphy
+ - rockchip,rk1808-csi-dphy
+ - rockchip,rk3326-csi-dphy
+ - rockchip,rk3368-csi-dphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: pclk
+
+ '#phy-cells':
+ const: 0
+
+ power-domains:
+ description: Video in/out power domain.
+ maxItems: 1
+
+ resets:
+ items:
+ - description: exclusive PHY reset line
+
+ reset-names:
+ items:
+ - const: apb
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Some additional phy settings are access through GRF regs.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#phy-cells'
+ - power-domains
+ - resets
+ - reset-names
+ - rockchip,grf
+
+additionalProperties: false
+
+examples:
+ - |
+
+ csi_dphy: phy@ff2f0000 {
+ compatible = "rockchip,px30-csi-dphy";
+ reg = <0xff2f0000 0x4000>;
+ clocks = <&cru 1>;
+ clock-names = "pclk";
+ #phy-cells = <0>;
+ power-domains = <&power 1>;
+ resets = <&cru 1>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
deleted file mode 100644
index 4ed569046daf..000000000000
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-ROCKCHIP USB2 PHY
-
-Required properties:
- - compatible: matching the soc type, one of
- "rockchip,rk3066a-usb-phy"
- "rockchip,rk3188-usb-phy"
- "rockchip,rk3288-usb-phy"
- - #address-cells: should be 1
- - #size-cells: should be 0
-
-Deprecated properties:
- - rockchip,grf : phandle to the syscon managing the "general
- register files" - phy should be a child of the GRF instead
-
-Sub-nodes:
-Each PHY should be represented as a sub-node.
-
-Sub-nodes
-required properties:
-- #phy-cells: should be 0
-- reg: PHY configure reg address offset in GRF
- "0x320" - for PHY attach to OTG controller
- "0x334" - for PHY attach to HOST0 controller
- "0x348" - for PHY attach to HOST1 controller
-
-Optional Properties:
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names: string, clock name, must be "phyclk"
-- #clock-cells: for users of the phy-pll, should be 0
-- reset-names: Only allow the following entries:
- - phy-reset
-- resets: Must contain an entry for each entry in reset-names.
-- vbus-supply: power-supply phandle for vbus power source
-
-Example:
-
-grf: syscon@ff770000 {
- compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
-
-...
-
- usbphy: phy {
- compatible = "rockchip,rk3288-usb-phy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usb-phy0 {
- #phy-cells = <0>;
- reg = <0x320>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 000000000000..f0fc8275dcd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3288-usb-phy
+ - items:
+ - enum:
+ - rockchip,rk3066a-usb-phy
+ - rockchip,rk3188-usb-phy
+ - const: rockchip,rk3288-usb-phy
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "usb-phy@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: phyclk
+
+ "#clock-cells":
+ const: 0
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy-reset
+
+ vbus-supply:
+ description: phandle for vbus power source
+
+ required:
+ - reg
+ - "#phy-cells"
+
+ additionalProperties: false
+
+examples:
+ - |
+ usbphy: usbphy {
+ compatible = "rockchip,rk3288-usb-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbphy0: usb-phy@320 {
+ reg = <0x320>;
+ #phy-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
new file mode 100644
index 000000000000..6107880e5246
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TCAN104x CAN TRANSCEIVER PHY
+
+maintainers:
+ - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+ $nodename:
+ pattern: "^can-phy"
+
+ compatible:
+ enum:
+ - ti,tcan1042
+ - ti,tcan1043
+
+ '#phy-cells':
+ const: 0
+
+ standby-gpios:
+ description:
+ gpio node to toggle standby signal on transceiver
+ maxItems: 1
+
+ enable-gpios:
+ description:
+ gpio node to toggle enable signal on transceiver
+ maxItems: 1
+
+ max-bitrate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ max bit rate supported in bps
+ minimum: 1
+
+required:
+ - compatible
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ transceiver1: can-phy {
+ compatible = "ti,tcan1043";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
index f3a1223f2517..75df90d1e54c 100644
--- a/Documentation/fpga/dfl.rst
+++ b/Documentation/fpga/dfl.rst
@@ -57,7 +57,7 @@ FPGA Interface Unit (FIU) represents a standalone functional unit for the
interface to FPGA, e.g. the FPGA Management Engine (FME) and Port (more
descriptions on FME and Port in later sections).
-Accelerated Function Unit (AFU) represents a FPGA programmable region and
+Accelerated Function Unit (AFU) represents an FPGA programmable region and
always connects to a FIU (e.g. a Port) as its child as illustrated above.
Private Features represent sub features of the FIU and AFU. They could be
@@ -311,7 +311,7 @@ The driver organization in virtualization case is illustrated below:
| PCI PF Device | | | PCI VF Device |
+---------------+ | +---------------+
-FPGA PCIe device driver is always loaded first once a FPGA PCIe PF or VF device
+FPGA PCIe device driver is always loaded first once an FPGA PCIe PF or VF device
is detected. It:
* Finishes enumeration on both FPGA PCIe PF and VF device using common
diff --git a/Documentation/userspace-api/accelerators/ocxl.rst b/Documentation/userspace-api/accelerators/ocxl.rst
index 14cefc020e2d..db7570d5e50d 100644
--- a/Documentation/userspace-api/accelerators/ocxl.rst
+++ b/Documentation/userspace-api/accelerators/ocxl.rst
@@ -6,7 +6,7 @@ OpenCAPI is an interface between processors and accelerators. It aims
at being low-latency and high-bandwidth. The specification is
developed by the `OpenCAPI Consortium <http://opencapi.org/>`_.
-It allows an accelerator (which could be a FPGA, ASICs, ...) to access
+It allows an accelerator (which could be an FPGA, ASICs, ...) to access
the host memory coherently, using virtual addresses. An OpenCAPI
device can also host its own memory, that can be accessed from the
host.
diff --git a/Documentation/w1/slaves/w1_ds2438.rst b/Documentation/w1/slaves/w1_ds2438.rst
index a29309a3f8e5..4fa671fbc93f 100644
--- a/Documentation/w1/slaves/w1_ds2438.rst
+++ b/Documentation/w1/slaves/w1_ds2438.rst
@@ -22,7 +22,7 @@ is also often used in weather stations and applications such as: rain gauge,
wind speed/direction measuring, humidity sensing, etc.
Current support is provided through the following sysfs files (all files
-except "iad" are readonly):
+except "iad" and "offset" are readonly):
"iad"
-----
@@ -44,6 +44,23 @@ Internally when this file is read, the additional CRC byte is also obtained
from the slave device. If it is correct, the 8 bytes page data are passed
to userspace, otherwise an I/O error is returned.
+"page1"
+-------
+This file provides full 8 bytes of the chip Page 1 (01h).
+This page contains the ICA, elapsed time meter and current offset data of the DS2438.
+Internally when this file is read, the additional CRC byte is also obtained
+from the slave device. If it is correct, the 8 bytes page data are passed
+to userspace, otherwise an I/O error is returned.
+
+"offset"
+--------
+This file controls the 2-byte Offset Register of the chip.
+Writing a 2-byte value will change the Offset Register, which changes the
+current measurement done by the chip. Changing this register to the two's complement
+of the current register while forcing zero current through the load will calibrate
+the chip, canceling offset errors in the current ADC.
+
+
"temperature"
-------------
Opening and reading this file initiates the CONVERT_T (temperature conversion)
diff --git a/MAINTAINERS b/MAINTAINERS
index d9feb2ba6e14..2dd5d046b0b5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4075,7 +4075,9 @@ W: https://github.com/linux-can
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
F: Documentation/devicetree/bindings/net/can/
+F: Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
F: drivers/net/can/
+F: drivers/phy/phy-can-transceiver.c
F: include/linux/can/bittiming.h
F: include/linux/can/dev.h
F: include/linux/can/led.h
@@ -11012,7 +11014,7 @@ MARVELL ARMADA 3700 PHY DRIVERS
M: Miquel Raynal <miquel.raynal@bootlin.com>
S: Maintained
F: Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
-F: Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
+F: Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
F: drivers/phy/marvell/phy-mvebu-a3700-comphy.c
F: drivers/phy/marvell/phy-mvebu-a3700-utmi.c
diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
index 059f0eb678e0..8a1a83bbb6d5 100644
--- a/arch/sparc/include/asm/vio.h
+++ b/arch/sparc/include/asm/vio.h
@@ -362,7 +362,7 @@ struct vio_driver {
struct list_head node;
const struct vio_device_id *id_table;
int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
- int (*remove)(struct vio_dev *dev);
+ void (*remove)(struct vio_dev *dev);
void (*shutdown)(struct vio_dev *dev);
unsigned long driver_data;
struct device_driver driver;
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 522e5b51050c..4a5bdb0df779 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1236,11 +1236,6 @@ out_err:
return err;
}
-static int ds_remove(struct vio_dev *vdev)
-{
- return 0;
-}
-
static const struct vio_device_id ds_match[] = {
{
.type = "domain-services-port",
@@ -1251,7 +1246,6 @@ static const struct vio_device_id ds_match[] = {
static struct vio_driver ds_driver = {
.id_table = ds_match,
.probe = ds_probe,
- .remove = ds_remove,
.name = "ds",
};
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 4f57056ed463..348a88691219 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -105,10 +105,10 @@ static int vio_device_remove(struct device *dev)
* routines to do so at the moment. TBD
*/
- return drv->remove(vdev);
+ drv->remove(vdev);
}
- return 1;
+ return 0;
}
static ssize_t devspec_show(struct device *dev,
diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c
index 359bead4b280..fdc6b593f500 100644
--- a/drivers/accessibility/braille/braille_console.c
+++ b/drivers/accessibility/braille/braille_console.c
@@ -225,6 +225,7 @@ static int keyboard_notifier_call(struct notifier_block *blk,
case KBD_POST_KEYSYM:
{
unsigned char type = KTYP(param->value) - 0xf0;
+
if (type == KT_SPEC) {
unsigned char val = KVAL(param->value);
int on_off = -1;
@@ -265,6 +266,7 @@ static int vt_notifier_call(struct notifier_block *blk,
{
struct vt_notifier_param *param = _param;
struct vc_data *vc = param->vc;
+
switch (code) {
case VT_ALLOCATE:
break;
@@ -273,6 +275,7 @@ static int vt_notifier_call(struct notifier_block *blk,
case VT_WRITE:
{
unsigned char c = param->c;
+
if (vc->vc_num != fg_console)
break;
switch (c) {
diff --git a/drivers/accessibility/speakup/i18n.c b/drivers/accessibility/speakup/i18n.c
index 46bd50f3c3a4..bc7b47d1876f 100644
--- a/drivers/accessibility/speakup/i18n.c
+++ b/drivers/accessibility/speakup/i18n.c
@@ -90,6 +90,13 @@ static char *speakup_default_msgs[MSG_LAST_INDEX] = {
[MSG_COLOR_YELLOW] = "yellow",
[MSG_COLOR_WHITE] = "white",
[MSG_COLOR_GREY] = "grey",
+ [MSG_COLOR_BRIGHTBLUE] "bright blue",
+ [MSG_COLOR_BRIGHTGREEN] "bright green",
+ [MSG_COLOR_BRIGHTCYAN] "bright cyan",
+ [MSG_COLOR_BRIGHTRED] "bright red",
+ [MSG_COLOR_BRIGHTMAGENTA] "bright magenta",
+ [MSG_COLOR_BRIGHTYELLOW] "bright yellow",
+ [MSG_COLOR_BRIGHTWHITE] "bright white",
/* Names of key states. */
[MSG_STATE_DOUBLE] = "double",
diff --git a/drivers/accessibility/speakup/i18n.h b/drivers/accessibility/speakup/i18n.h
index 2a607d263234..51e3260995d9 100644
--- a/drivers/accessibility/speakup/i18n.h
+++ b/drivers/accessibility/speakup/i18n.h
@@ -99,7 +99,14 @@ enum msg_index_t {
MSG_COLOR_YELLOW,
MSG_COLOR_WHITE,
MSG_COLOR_GREY,
- MSG_COLORS_END = MSG_COLOR_GREY,
+ MSG_COLOR_BRIGHTBLUE,
+ MSG_COLOR_BRIGHTGREEN,
+ MSG_COLOR_BRIGHTCYAN,
+ MSG_COLOR_BRIGHTRED,
+ MSG_COLOR_BRIGHTMAGENTA,
+ MSG_COLOR_BRIGHTYELLOW,
+ MSG_COLOR_BRIGHTWHITE,
+ MSG_COLORS_END = MSG_COLOR_BRIGHTWHITE,
MSG_STATES_START,
MSG_STATE_DOUBLE = MSG_STATES_START,
diff --git a/drivers/accessibility/speakup/main.c b/drivers/accessibility/speakup/main.c
index 428fceaf9d50..d726537fa16c 100644
--- a/drivers/accessibility/speakup/main.c
+++ b/drivers/accessibility/speakup/main.c
@@ -389,10 +389,6 @@ static void say_attributes(struct vc_data *vc)
int fg = spk_attr & 0x0f;
int bg = spk_attr >> 4;
- if (fg > 8) {
- synth_printf("%s ", spk_msg_get(MSG_BRIGHT));
- fg -= 8;
- }
synth_printf("%s", spk_msg_get(MSG_COLORS_START + fg));
if (bg > 7) {
synth_printf(" %s ", spk_msg_get(MSG_ON_BLINKING));
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index c4631e684386..4d4bb810c2ae 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -1050,7 +1050,7 @@ err_out_release_mdesc:
return err;
}
-static int vdc_port_remove(struct vio_dev *vdev)
+static void vdc_port_remove(struct vio_dev *vdev)
{
struct vdc_port *port = dev_get_drvdata(&vdev->dev);
@@ -1072,7 +1072,6 @@ static int vdc_port_remove(struct vio_dev *vdev)
kfree(port);
}
- return 0;
}
static void vdc_requeue_inflight(struct vdc_port *port)
diff --git a/drivers/bus/fsl-mc/dprc-driver.c b/drivers/bus/fsl-mc/dprc-driver.c
index e3e2ae41c22b..315e830b6ecd 100644
--- a/drivers/bus/fsl-mc/dprc-driver.c
+++ b/drivers/bus/fsl-mc/dprc-driver.c
@@ -350,7 +350,8 @@ int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev,
* dprc_scan_container - Scans a physical DPRC and synchronizes Linux bus state
*
* @mc_bus_dev: pointer to the fsl-mc device that represents a DPRC object
- *
+ * @alloc_interrupts: if true the function allocates the interrupt pool,
+ * otherwise the interrupt allocation is delayed
* Scans the physical DPRC and synchronizes the state of the Linux
* bus driver with the actual state of the MC by adding and removing
* devices as appropriate.
@@ -373,10 +374,11 @@ int dprc_scan_container(struct fsl_mc_device *mc_bus_dev,
return error;
}
EXPORT_SYMBOL_GPL(dprc_scan_container);
+
/**
* dprc_irq0_handler - Regular ISR for DPRC interrupt 0
*
- * @irq: IRQ number of the interrupt being handled
+ * @irq_num: IRQ number of the interrupt being handled
* @arg: Pointer to device structure
*/
static irqreturn_t dprc_irq0_handler(int irq_num, void *arg)
@@ -387,7 +389,7 @@ static irqreturn_t dprc_irq0_handler(int irq_num, void *arg)
/**
* dprc_irq0_handler_thread - Handler thread function for DPRC interrupt 0
*
- * @irq: IRQ number of the interrupt being handled
+ * @irq_num: IRQ number of the interrupt being handled
* @arg: Pointer to device structure
*/
static irqreturn_t dprc_irq0_handler_thread(int irq_num, void *arg)
diff --git a/drivers/bus/fsl-mc/dprc.c b/drivers/bus/fsl-mc/dprc.c
index 27b0a01bad9b..d129338b8bc0 100644
--- a/drivers/bus/fsl-mc/dprc.c
+++ b/drivers/bus/fsl-mc/dprc.c
@@ -334,7 +334,7 @@ int dprc_clear_irq_status(struct fsl_mc_io *mc_io,
* @mc_io: Pointer to MC portal's I/O object
* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
* @token: Token of DPRC object
- * @attributes Returned container attributes
+ * @attr: Returned container attributes
*
* Return: '0' on Success; Error code otherwise.
*/
@@ -504,7 +504,7 @@ EXPORT_SYMBOL_GPL(dprc_set_obj_irq);
* @mc_io: Pointer to MC portal's I/O object
* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
* @token: Token of DPRC object
- * @obj_type; Object type as returned in dprc_get_obj()
+ * @obj_type: Object type as returned in dprc_get_obj()
* @obj_id: Unique object instance as returned in dprc_get_obj()
* @region_index: The specific region to query
* @region_desc: Returns the requested region descriptor
diff --git a/drivers/bus/fsl-mc/fsl-mc-allocator.c b/drivers/bus/fsl-mc/fsl-mc-allocator.c
index 2d7c764bb7dc..6c513556911e 100644
--- a/drivers/bus/fsl-mc/fsl-mc-allocator.c
+++ b/drivers/bus/fsl-mc/fsl-mc-allocator.c
@@ -254,7 +254,7 @@ EXPORT_SYMBOL_GPL(fsl_mc_resource_free);
* @mc_dev: fsl-mc device which is used in conjunction with the
* allocated object
* @pool_type: pool type
- * @new_mc_dev: pointer to area where the pointer to the allocated device
+ * @new_mc_adev: pointer to area where the pointer to the allocated device
* is to be returned
*
* Allocatable objects are always used in conjunction with some functional
@@ -409,7 +409,7 @@ cleanup_msi_irqs:
}
EXPORT_SYMBOL_GPL(fsl_mc_populate_irq_pool);
-/**
+/*
* Teardown the interrupt pool associated with an fsl-mc bus.
* It frees the IRQs that were allocated to the pool, back to the GIC-ITS.
*/
@@ -436,7 +436,7 @@ void fsl_mc_cleanup_irq_pool(struct fsl_mc_device *mc_bus_dev)
}
EXPORT_SYMBOL_GPL(fsl_mc_cleanup_irq_pool);
-/**
+/*
* Allocate the IRQs required by a given fsl-mc device.
*/
int __must_check fsl_mc_allocate_irqs(struct fsl_mc_device *mc_dev)
@@ -578,7 +578,7 @@ void fsl_mc_cleanup_all_resource_pools(struct fsl_mc_device *mc_bus_dev)
fsl_mc_cleanup_resource_pool(mc_bus_dev, pool_type);
}
-/**
+/*
* fsl_mc_allocator_probe - callback invoked when an allocatable device is
* being added to the system
*/
@@ -610,7 +610,7 @@ static int fsl_mc_allocator_probe(struct fsl_mc_device *mc_dev)
return 0;
}
-/**
+/*
* fsl_mc_allocator_remove - callback invoked when an allocatable device is
* being removed from the system
*/
diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c b/drivers/bus/fsl-mc/fsl-mc-bus.c
index 380ad1fdb745..09c8ab5e0959 100644
--- a/drivers/bus/fsl-mc/fsl-mc-bus.c
+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
@@ -24,7 +24,7 @@
#include "fsl-mc-private.h"
-/**
+/*
* Default DMA mask for devices on a fsl-mc bus
*/
#define FSL_MC_DEFAULT_DMA_MASK (~0ULL)
@@ -36,6 +36,7 @@ static struct fsl_mc_version mc_version;
* @root_mc_bus_dev: fsl-mc device representing the root DPRC
* @num_translation_ranges: number of entries in addr_translation_ranges
* @translation_ranges: array of bus to system address translation ranges
+ * @fsl_mc_regs: base address of register bank
*/
struct fsl_mc {
struct fsl_mc_device *root_mc_bus_dev;
@@ -117,7 +118,7 @@ out:
return found;
}
-/**
+/*
* fsl_mc_bus_uevent - callback invoked when a device is added
*/
static int fsl_mc_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
@@ -467,7 +468,7 @@ static void fsl_mc_driver_shutdown(struct device *dev)
mc_drv->shutdown(mc_dev);
}
-/**
+/*
* __fsl_mc_driver_register - registers a child device driver with the
* MC bus
*
@@ -503,7 +504,7 @@ int __fsl_mc_driver_register(struct fsl_mc_driver *mc_driver,
}
EXPORT_SYMBOL_GPL(__fsl_mc_driver_register);
-/**
+/*
* fsl_mc_driver_unregister - unregisters a device driver from the
* MC bus
*/
@@ -563,7 +564,7 @@ struct fsl_mc_version *fsl_mc_get_version(void)
}
EXPORT_SYMBOL_GPL(fsl_mc_get_version);
-/**
+/*
* fsl_mc_get_root_dprc - function to traverse to the root dprc
*/
void fsl_mc_get_root_dprc(struct device *dev,
@@ -732,7 +733,7 @@ error_cleanup_regions:
return error;
}
-/**
+/*
* fsl_mc_is_root_dprc - function to check if a given device is a root dprc
*/
bool fsl_mc_is_root_dprc(struct device *dev)
@@ -757,7 +758,7 @@ static void fsl_mc_device_release(struct device *dev)
kfree(mc_dev);
}
-/**
+/*
* Add a newly discovered fsl-mc device to be visible in Linux
*/
int fsl_mc_device_add(struct fsl_mc_obj_desc *obj_desc,
@@ -1058,7 +1059,7 @@ static int get_mc_addr_translation_ranges(struct device *dev,
return 0;
}
-/**
+/*
* fsl_mc_bus_probe - callback invoked when the root MC bus is being
* added
*/
@@ -1182,7 +1183,7 @@ error_cleanup_mc_io:
return error;
}
-/**
+/*
* fsl_mc_bus_remove - callback invoked when the root MC bus is being
* removed
*/
diff --git a/drivers/bus/fsl-mc/fsl-mc-msi.c b/drivers/bus/fsl-mc/fsl-mc-msi.c
index 8edadf05cbb7..cf974870ba55 100644
--- a/drivers/bus/fsl-mc/fsl-mc-msi.c
+++ b/drivers/bus/fsl-mc/fsl-mc-msi.c
@@ -148,7 +148,7 @@ static void fsl_mc_msi_update_chip_ops(struct msi_domain_info *info)
/**
* fsl_mc_msi_create_irq_domain - Create a fsl-mc MSI interrupt domain
- * @np: Optional device-tree node of the interrupt controller
+ * @fwnode: Optional firmware node of the interrupt controller
* @info: MSI domain info
* @parent: Parent irq domain
*
diff --git a/drivers/bus/fsl-mc/mc-io.c b/drivers/bus/fsl-mc/mc-io.c
index 305015486b91..95b10a6cf307 100644
--- a/drivers/bus/fsl-mc/mc-io.c
+++ b/drivers/bus/fsl-mc/mc-io.c
@@ -50,12 +50,12 @@ static void fsl_mc_io_unset_dpmcp(struct fsl_mc_io *mc_io)
}
/**
- * Creates an MC I/O object
+ * fsl_create_mc_io() - Creates an MC I/O object
*
* @dev: device to be associated with the MC I/O object
* @mc_portal_phys_addr: physical address of the MC portal to use
* @mc_portal_size: size in bytes of the MC portal
- * @dpmcp-dev: Pointer to the DPMCP object associated with this MC I/O
+ * @dpmcp_dev: Pointer to the DPMCP object associated with this MC I/O
* object or NULL if none.
* @flags: flags for the new MC I/O object
* @new_mc_io: Area to return pointer to newly created MC I/O object
@@ -123,7 +123,7 @@ error_destroy_mc_io:
}
/**
- * Destroys an MC I/O object
+ * fsl_destroy_mc_io() - Destroys an MC I/O object
*
* @mc_io: MC I/O object to destroy
*/
diff --git a/drivers/bus/fsl-mc/mc-sys.c b/drivers/bus/fsl-mc/mc-sys.c
index b291b35e3884..f2052cd0a051 100644
--- a/drivers/bus/fsl-mc/mc-sys.c
+++ b/drivers/bus/fsl-mc/mc-sys.c
@@ -16,7 +16,7 @@
#include "fsl-mc-private.h"
-/**
+/*
* Timeout in milliseconds to wait for the completion of an MC command
*/
#define MC_CMD_COMPLETION_TIMEOUT_MS 500
@@ -148,9 +148,10 @@ static inline enum mc_cmd_status mc_read_response(struct fsl_mc_command __iomem
}
/**
- * Waits for the completion of an MC command doing preemptible polling.
- * uslepp_range() is called between polling iterations.
- *
+ * mc_polling_wait_preemptible() - Waits for the completion of an MC
+ * command doing preemptible polling.
+ * uslepp_range() is called between
+ * polling iterations.
* @mc_io: MC I/O object to be used
* @cmd: command buffer to receive MC response
* @mc_status: MC command completion status
@@ -194,9 +195,9 @@ static int mc_polling_wait_preemptible(struct fsl_mc_io *mc_io,
}
/**
- * Waits for the completion of an MC command doing atomic polling.
- * udelay() is called between polling iterations.
- *
+ * mc_polling_wait_atomic() - Waits for the completion of an MC command
+ * doing atomic polling. udelay() is called
+ * between polling iterations.
* @mc_io: MC I/O object to be used
* @cmd: command buffer to receive MC response
* @mc_status: MC command completion status
@@ -234,8 +235,8 @@ static int mc_polling_wait_atomic(struct fsl_mc_io *mc_io,
}
/**
- * Sends a command to the MC device using the given MC I/O object
- *
+ * mc_send_command() - Sends a command to the MC device using the given
+ * MC I/O object
* @mc_io: MC I/O object to be used
* @cmd: command to be sent
*
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index e2e59a341fef..bbf6cd04861e 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -465,23 +465,15 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
/* Trigger MHI RESET so that the device will not access host memory */
if (!MHI_PM_IN_FATAL_STATE(mhi_cntrl->pm_state)) {
- u32 in_reset = -1;
- unsigned long timeout = msecs_to_jiffies(mhi_cntrl->timeout_ms);
-
dev_dbg(dev, "Triggering MHI Reset in device\n");
mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
/* Wait for the reset bit to be cleared by the device */
- ret = wait_event_timeout(mhi_cntrl->state_event,
- mhi_read_reg_field(mhi_cntrl,
- mhi_cntrl->regs,
- MHICTRL,
- MHICTRL_RESET_MASK,
- MHICTRL_RESET_SHIFT,
- &in_reset) ||
- !in_reset, timeout);
- if (!ret || in_reset)
- dev_err(dev, "Device failed to exit MHI Reset state\n");
+ ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
+ MHICTRL_RESET_MASK, MHICTRL_RESET_SHIFT, 0,
+ 25000);
+ if (ret)
+ dev_err(dev, "Device failed to clear MHI Reset\n");
/*
* Device will clear BHI_INTVEC as a part of RESET processing,
@@ -934,6 +926,7 @@ int mhi_pm_resume(struct mhi_controller *mhi_cntrl)
ret = wait_event_timeout(mhi_cntrl->state_event,
mhi_cntrl->dev_state == MHI_STATE_M0 ||
+ mhi_cntrl->dev_state == MHI_STATE_M2 ||
MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
msecs_to_jiffies(mhi_cntrl->timeout_ms));
diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
index b3357a8a2fdb..ca3bc40427f8 100644
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -665,7 +665,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
if (err)
- return err;
+ goto err_disable_reporting;
/* MHI bus does not power up the controller by default */
err = mhi_prepare_for_power_up(mhi_cntrl);
@@ -699,6 +699,8 @@ err_unprepare:
mhi_unprepare_after_power_down(mhi_cntrl);
err_unregister:
mhi_unregister_controller(mhi_cntrl);
+err_disable_reporting:
+ pci_disable_pcie_error_reporting(pdev);
return err;
}
@@ -721,6 +723,7 @@ static void mhi_pci_remove(struct pci_dev *pdev)
pm_runtime_get_noresume(&pdev->dev);
mhi_unregister_controller(mhi_cntrl);
+ pci_disable_pcie_error_reporting(pdev);
}
static void mhi_pci_shutdown(struct pci_dev *pdev)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index b151e0fcdeb5..8e516aad632b 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -357,27 +357,6 @@ config NVRAM
To compile this driver as a module, choose M here: the
module will be called nvram.
-config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN)"
- depends on BLOCK
- help
- The raw driver permits block devices to be bound to /dev/raw/rawN.
- Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
- See the raw(8) manpage for more details.
-
- Applications should preferably open the device (eg /dev/hda1)
- with the O_DIRECT flag.
-
-config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-65536)"
- depends on RAW_DRIVER
- range 1 65536
- default "256"
- help
- The maximum number of RAW devices that are supported.
- Default is 256. Increase this number in case you need lots of
- raw devices.
-
config DEVPORT
bool "/dev/port character device"
depends on ISA || PCI
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index ffce287ef415..264eb398fdd4 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_TTY_PRINTK) += ttyprintk.o
obj-y += misc.o
obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
-obj-$(CONFIG_RAW_DRIVER) += raw.o
obj-$(CONFIG_MSPEC) += mspec.o
obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
obj-$(CONFIG_IBM_BSR) += bsr.o
@@ -44,6 +43,6 @@ obj-$(CONFIG_TCG_TPM) += tpm/
obj-$(CONFIG_PS3_FLASH) += ps3flash.o
-obj-$(CONFIG_XILLYBUS) += xillybus/
+obj-$(CONFIG_XILLYBUS_CLASS) += xillybus/
obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o
obj-$(CONFIG_ADI) += adi.o
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 8b55085650ad..4e5431f01450 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -156,12 +156,12 @@ static irqreturn_t hpet_interrupt(int irq, void *data)
* This has the effect of treating non-periodic like periodic.
*/
if ((devp->hd_flags & (HPET_IE | HPET_PERIODIC)) == HPET_IE) {
- unsigned long m, t, mc, base, k;
+ unsigned long t, mc, base, k;
struct hpet __iomem *hpet = devp->hd_hpet;
struct hpets *hpetp = devp->hd_hpets;
t = devp->hd_ireqfreq;
- m = read_counter(&devp->hd_timer->hpet_compare);
+ read_counter(&devp->hd_timer->hpet_compare);
mc = read_counter(&hpet->hpet_mc);
/* The time for the next interrupt would logically be t + m,
* however, if we are very unlucky and the interrupt is delayed
diff --git a/drivers/char/hw_random/pseries-rng.c b/drivers/char/hw_random/pseries-rng.c
index f4949b689bd5..62bdd5af1339 100644
--- a/drivers/char/hw_random/pseries-rng.c
+++ b/drivers/char/hw_random/pseries-rng.c
@@ -29,7 +29,7 @@ static int pseries_rng_read(struct hwrng *rng, void *data, size_t max, bool wait
return 8;
}
-/**
+/*
* pseries_rng_get_desired_dma - Return desired DMA allocate for CMO operations
*
* This is a required function for a driver to operate in a CMO environment
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 15dc54fa1d47..1c596b5cdb27 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -16,7 +16,6 @@
#include <linux/mman.h>
#include <linux/random.h>
#include <linux/init.h>
-#include <linux/raw.h>
#include <linux/tty.h>
#include <linux/capability.h>
#include <linux/ptrace.h>
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 89681f07bc78..8f1bce0b4fe5 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -544,6 +544,10 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
io_read_num_rec_bytes(iobase, &num_bytes_read);
if (num_bytes_read >= 4) {
DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read);
+ if (num_bytes_read > 4) {
+ rc = -EIO;
+ goto exit_setprotocol;
+ }
break;
}
usleep_range(10000, 11000);
@@ -1050,7 +1054,6 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf,
struct cm4000_dev *dev = filp->private_data;
unsigned int iobase = dev->p_dev->resource[0]->start;
unsigned short s;
- unsigned char tmp;
unsigned char infolen;
unsigned char sendT0;
unsigned short nsend;
@@ -1148,7 +1151,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf,
set_cardparameter(dev);
/* dummy read, reset flag procedure received */
- tmp = inb(REG_FLAGS1(iobase));
+ inb(REG_FLAGS1(iobase));
dev->flags1 = 0x20 /* T_Active */
| (sendT0)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index d5e43606339c..827711911da4 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -221,7 +221,6 @@ static ssize_t cm4040_read(struct file *filp, char __user *buf,
unsigned long i;
size_t min_bytes_to_read;
int rc;
- unsigned char uc;
DEBUGP(2, dev, "-> cm4040_read(%s,%d)\n", current->comm, current->pid);
@@ -308,7 +307,7 @@ static ssize_t cm4040_read(struct file *filp, char __user *buf,
return -EIO;
}
- uc = xinb(iobase + REG_OFFSET_BULK_IN);
+ xinb(iobase + REG_OFFSET_BULK_IN);
DEBUGP(2, dev, "<- cm4040_read (successfully)\n");
return min_bytes_to_read;
diff --git a/drivers/char/pcmcia/scr24x_cs.c b/drivers/char/pcmcia/scr24x_cs.c
index 47feb39af34c..1bdce08fae3d 100644
--- a/drivers/char/pcmcia/scr24x_cs.c
+++ b/drivers/char/pcmcia/scr24x_cs.c
@@ -265,7 +265,6 @@ static int scr24x_probe(struct pcmcia_device *link)
cdev_init(&dev->c_dev, &scr24x_fops);
dev->c_dev.owner = THIS_MODULE;
- dev->c_dev.ops = &scr24x_fops;
ret = cdev_add(&dev->c_dev, MKDEV(MAJOR(scr24x_devt), dev->devno), 1);
if (ret < 0)
goto err;
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
deleted file mode 100644
index 5d52a1f4738c..000000000000
--- a/drivers/char/raw.c
+++ /dev/null
@@ -1,362 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/char/raw.c
- *
- * Front-end raw character devices. These can be bound to any block
- * devices to provide genuine Unix raw character device semantics.
- *
- * We reserve minor number 0 for a control interface. ioctl()s on this
- * device are used to bind the other minor numbers to block devices.
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/backing-dev.h>
-#include <linux/module.h>
-#include <linux/raw.h>
-#include <linux/capability.h>
-#include <linux/uio.h>
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/gfp.h>
-#include <linux/compat.h>
-#include <linux/vmalloc.h>
-
-#include <linux/uaccess.h>
-
-struct raw_device_data {
- dev_t binding;
- struct block_device *bdev;
- int inuse;
-};
-
-static struct class *raw_class;
-static struct raw_device_data *raw_devices;
-static DEFINE_MUTEX(raw_mutex);
-static const struct file_operations raw_ctl_fops; /* forward declaration */
-
-static int max_raw_minors = CONFIG_MAX_RAW_DEVS;
-
-module_param(max_raw_minors, int, 0);
-MODULE_PARM_DESC(max_raw_minors, "Maximum number of raw devices (1-65536)");
-
-/*
- * Open/close code for raw IO.
- *
- * We just rewrite the i_mapping for the /dev/raw/rawN file descriptor to
- * point at the blockdev's address_space and set the file handle to use
- * O_DIRECT.
- *
- * Set the device's soft blocksize to the minimum possible. This gives the
- * finest possible alignment and has no adverse impact on performance.
- */
-static int raw_open(struct inode *inode, struct file *filp)
-{
- const int minor = iminor(inode);
- struct block_device *bdev;
- int err;
-
- if (minor == 0) { /* It is the control device */
- filp->f_op = &raw_ctl_fops;
- return 0;
- }
-
- pr_warn_ratelimited(
- "process %s (pid %d) is using the deprecated raw device\n"
- "support will be removed in Linux 5.14.\n",
- current->comm, current->pid);
-
- mutex_lock(&raw_mutex);
-
- /*
- * All we need to do on open is check that the device is bound.
- */
- err = -ENODEV;
- if (!raw_devices[minor].binding)
- goto out;
- bdev = blkdev_get_by_dev(raw_devices[minor].binding,
- filp->f_mode | FMODE_EXCL, raw_open);
- if (IS_ERR(bdev)) {
- err = PTR_ERR(bdev);
- goto out;
- }
- err = set_blocksize(bdev, bdev_logical_block_size(bdev));
- if (err)
- goto out1;
- filp->f_flags |= O_DIRECT;
- filp->f_mapping = bdev->bd_inode->i_mapping;
- if (++raw_devices[minor].inuse == 1)
- file_inode(filp)->i_mapping =
- bdev->bd_inode->i_mapping;
- filp->private_data = bdev;
- raw_devices[minor].bdev = bdev;
- mutex_unlock(&raw_mutex);
- return 0;
-
-out1:
- blkdev_put(bdev, filp->f_mode | FMODE_EXCL);
-out:
- mutex_unlock(&raw_mutex);
- return err;
-}
-
-/*
- * When the final fd which refers to this character-special node is closed, we
- * make its ->mapping point back at its own i_data.
- */
-static int raw_release(struct inode *inode, struct file *filp)
-{
- const int minor= iminor(inode);
- struct block_device *bdev;
-
- mutex_lock(&raw_mutex);
- bdev = raw_devices[minor].bdev;
- if (--raw_devices[minor].inuse == 0)
- /* Here inode->i_mapping == bdev->bd_inode->i_mapping */
- inode->i_mapping = &inode->i_data;
- mutex_unlock(&raw_mutex);
-
- blkdev_put(bdev, filp->f_mode | FMODE_EXCL);
- return 0;
-}
-
-/*
- * Forward ioctls to the underlying block device.
- */
-static long
-raw_ioctl(struct file *filp, unsigned int command, unsigned long arg)
-{
- struct block_device *bdev = filp->private_data;
- return blkdev_ioctl(bdev, 0, command, arg);
-}
-
-static int bind_set(int number, u64 major, u64 minor)
-{
- dev_t dev = MKDEV(major, minor);
- dev_t raw = MKDEV(RAW_MAJOR, number);
- struct raw_device_data *rawdev;
- int err = 0;
-
- if (number <= 0 || number >= max_raw_minors)
- return -EINVAL;
-
- if (MAJOR(dev) != major || MINOR(dev) != minor)
- return -EINVAL;
-
- rawdev = &raw_devices[number];
-
- /*
- * This is like making block devices, so demand the
- * same capability
- */
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- /*
- * For now, we don't need to check that the underlying
- * block device is present or not: we can do that when
- * the raw device is opened. Just check that the
- * major/minor numbers make sense.
- */
-
- if (MAJOR(dev) == 0 && dev != 0)
- return -EINVAL;
-
- mutex_lock(&raw_mutex);
- if (rawdev->inuse) {
- mutex_unlock(&raw_mutex);
- return -EBUSY;
- }
- if (rawdev->binding)
- module_put(THIS_MODULE);
-
- rawdev->binding = dev;
- if (!dev) {
- /* unbind */
- device_destroy(raw_class, raw);
- } else {
- __module_get(THIS_MODULE);
- device_destroy(raw_class, raw);
- device_create(raw_class, NULL, raw, NULL, "raw%d", number);
- }
- mutex_unlock(&raw_mutex);
- return err;
-}
-
-static int bind_get(int number, dev_t *dev)
-{
- if (number <= 0 || number >= max_raw_minors)
- return -EINVAL;
- *dev = raw_devices[number].binding;
- return 0;
-}
-
-/*
- * Deal with ioctls against the raw-device control interface, to bind
- * and unbind other raw devices.
- */
-static long raw_ctl_ioctl(struct file *filp, unsigned int command,
- unsigned long arg)
-{
- struct raw_config_request rq;
- dev_t dev;
- int err;
-
- switch (command) {
- case RAW_SETBIND:
- if (copy_from_user(&rq, (void __user *) arg, sizeof(rq)))
- return -EFAULT;
-
- return bind_set(rq.raw_minor, rq.block_major, rq.block_minor);
-
- case RAW_GETBIND:
- if (copy_from_user(&rq, (void __user *) arg, sizeof(rq)))
- return -EFAULT;
-
- err = bind_get(rq.raw_minor, &dev);
- if (err)
- return err;
-
- rq.block_major = MAJOR(dev);
- rq.block_minor = MINOR(dev);
-
- if (copy_to_user((void __user *)arg, &rq, sizeof(rq)))
- return -EFAULT;
-
- return 0;
- }
-
- return -EINVAL;
-}
-
-#ifdef CONFIG_COMPAT
-struct raw32_config_request {
- compat_int_t raw_minor;
- compat_u64 block_major;
- compat_u64 block_minor;
-};
-
-static long raw_ctl_compat_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- struct raw32_config_request __user *user_req = compat_ptr(arg);
- struct raw32_config_request rq;
- dev_t dev;
- int err = 0;
-
- switch (cmd) {
- case RAW_SETBIND:
- if (copy_from_user(&rq, user_req, sizeof(rq)))
- return -EFAULT;
-
- return bind_set(rq.raw_minor, rq.block_major, rq.block_minor);
-
- case RAW_GETBIND:
- if (copy_from_user(&rq, user_req, sizeof(rq)))
- return -EFAULT;
-
- err = bind_get(rq.raw_minor, &dev);
- if (err)
- return err;
-
- rq.block_major = MAJOR(dev);
- rq.block_minor = MINOR(dev);
-
- if (copy_to_user(user_req, &rq, sizeof(rq)))
- return -EFAULT;
-
- return 0;
- }
-
- return -EINVAL;
-}
-#endif
-
-static const struct file_operations raw_fops = {
- .read_iter = blkdev_read_iter,
- .write_iter = blkdev_write_iter,
- .fsync = blkdev_fsync,
- .open = raw_open,
- .release = raw_release,
- .unlocked_ioctl = raw_ioctl,
- .llseek = default_llseek,
- .owner = THIS_MODULE,
-};
-
-static const struct file_operations raw_ctl_fops = {
- .unlocked_ioctl = raw_ctl_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = raw_ctl_compat_ioctl,
-#endif
- .open = raw_open,
- .owner = THIS_MODULE,
- .llseek = noop_llseek,
-};
-
-static struct cdev raw_cdev;
-
-static char *raw_devnode(struct device *dev, umode_t *mode)
-{
- return kasprintf(GFP_KERNEL, "raw/%s", dev_name(dev));
-}
-
-static int __init raw_init(void)
-{
- dev_t dev = MKDEV(RAW_MAJOR, 0);
- int ret;
-
- if (max_raw_minors < 1 || max_raw_minors > 65536) {
- pr_warn("raw: invalid max_raw_minors (must be between 1 and 65536), using %d\n",
- CONFIG_MAX_RAW_DEVS);
- max_raw_minors = CONFIG_MAX_RAW_DEVS;
- }
-
- raw_devices = vzalloc(array_size(max_raw_minors,
- sizeof(struct raw_device_data)));
- if (!raw_devices) {
- printk(KERN_ERR "Not enough memory for raw device structures\n");
- ret = -ENOMEM;
- goto error;
- }
-
- ret = register_chrdev_region(dev, max_raw_minors, "raw");
- if (ret)
- goto error;
-
- cdev_init(&raw_cdev, &raw_fops);
- ret = cdev_add(&raw_cdev, dev, max_raw_minors);
- if (ret)
- goto error_region;
- raw_class = class_create(THIS_MODULE, "raw");
- if (IS_ERR(raw_class)) {
- printk(KERN_ERR "Error creating raw class.\n");
- cdev_del(&raw_cdev);
- ret = PTR_ERR(raw_class);
- goto error_region;
- }
- raw_class->devnode = raw_devnode;
- device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl");
-
- return 0;
-
-error_region:
- unregister_chrdev_region(dev, max_raw_minors);
-error:
- vfree(raw_devices);
- return ret;
-}
-
-static void __exit raw_exit(void)
-{
- device_destroy(raw_class, MKDEV(RAW_MAJOR, 0));
- class_destroy(raw_class);
- cdev_del(&raw_cdev);
- unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), max_raw_minors);
-}
-
-module_init(raw_init);
-module_exit(raw_exit);
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/xillybus/Kconfig b/drivers/char/xillybus/Kconfig
index 130dbdce858f..a8036dad437e 100644
--- a/drivers/char/xillybus/Kconfig
+++ b/drivers/char/xillybus/Kconfig
@@ -3,10 +3,14 @@
# Xillybus devices
#
+config XILLYBUS_CLASS
+ tristate
+
config XILLYBUS
tristate "Xillybus generic FPGA interface"
depends on PCI || OF
select CRC32
+ select XILLYBUS_CLASS
help
Xillybus is a generic interface for peripherals designed on
programmable logic (FPGA). The driver probes the hardware for
@@ -21,7 +25,7 @@ config XILLYBUS_PCIE
depends on PCI_MSI
help
Set to M if you want Xillybus to use PCI Express for communicating
- with the FPGA.
+ with the FPGA. The module will be called xillybus_pcie.
config XILLYBUS_OF
tristate "Xillybus over Device Tree"
@@ -29,6 +33,20 @@ config XILLYBUS_OF
help
Set to M if you want Xillybus to find its resources from the
Open Firmware Flattened Device Tree. If the target is an embedded
- system, say M.
+ system, say M. The module will be called xillybus_of.
endif # if XILLYBUS
+
+# XILLYUSB doesn't depend on XILLYBUS
+
+config XILLYUSB
+ tristate "XillyUSB: Xillybus generic FPGA interface for USB"
+ depends on USB
+ select CRC32
+ select XILLYBUS_CLASS
+ help
+ XillyUSB is the Xillybus variant which uses USB for communicating
+ with the FPGA.
+
+ Set to M if you want Xillybus to use USB for communicating with
+ the FPGA. The module will be called xillyusb.
diff --git a/drivers/char/xillybus/Makefile b/drivers/char/xillybus/Makefile
index 099e9a3585fc..16f31d03209d 100644
--- a/drivers/char/xillybus/Makefile
+++ b/drivers/char/xillybus/Makefile
@@ -3,6 +3,8 @@
# Makefile for Xillybus driver
#
+obj-$(CONFIG_XILLYBUS_CLASS) += xillybus_class.o
obj-$(CONFIG_XILLYBUS) += xillybus_core.o
obj-$(CONFIG_XILLYBUS_PCIE) += xillybus_pcie.o
obj-$(CONFIG_XILLYBUS_OF) += xillybus_of.o
+obj-$(CONFIG_XILLYUSB) += xillyusb.o
diff --git a/drivers/char/xillybus/xillybus.h b/drivers/char/xillybus/xillybus.h
index 8e3ed4d1bb7f..c63ffc56637c 100644
--- a/drivers/char/xillybus/xillybus.h
+++ b/drivers/char/xillybus/xillybus.h
@@ -30,7 +30,8 @@ struct xilly_buffer {
struct xilly_idt_handle {
unsigned char *chandesc;
- unsigned char *idt;
+ unsigned char *names;
+ int names_len;
int entries;
};
@@ -94,7 +95,6 @@ struct xilly_endpoint {
struct device *dev;
struct xilly_endpoint_hardware *ephw;
- struct list_head ep_list;
int dma_using_dac; /* =1 if 64-bit DMA is used, =0 otherwise. */
__iomem void *registers;
int fatal_error;
@@ -102,12 +102,6 @@ struct xilly_endpoint {
struct mutex register_mutex;
wait_queue_head_t ep_wait;
- /* Channels and message handling */
- struct cdev cdev;
-
- int major;
- int lowest_minor; /* Highest minor = lowest_minor + num_channels - 1 */
-
int num_channels; /* EXCLUDING message buffer */
struct xilly_channel **channels;
int msg_counter;
diff --git a/drivers/char/xillybus/xillybus_class.c b/drivers/char/xillybus/xillybus_class.c
new file mode 100644
index 000000000000..5046486011c8
--- /dev/null
+++ b/drivers/char/xillybus/xillybus_class.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2021 Xillybus Ltd, http://xillybus.com
+ *
+ * Driver for the Xillybus class
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+
+#include "xillybus_class.h"
+
+MODULE_DESCRIPTION("Driver for Xillybus class");
+MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
+MODULE_ALIAS("xillybus_class");
+MODULE_LICENSE("GPL v2");
+
+static DEFINE_MUTEX(unit_mutex);
+static LIST_HEAD(unit_list);
+static struct class *xillybus_class;
+
+#define UNITNAMELEN 16
+
+struct xilly_unit {
+ struct list_head list_entry;
+ void *private_data;
+
+ struct cdev *cdev;
+ char name[UNITNAMELEN];
+ int major;
+ int lowest_minor;
+ int num_nodes;
+};
+
+int xillybus_init_chrdev(struct device *dev,
+ const struct file_operations *fops,
+ struct module *owner,
+ void *private_data,
+ unsigned char *idt, unsigned int len,
+ int num_nodes,
+ const char *prefix, bool enumerate)
+{
+ int rc;
+ dev_t mdev;
+ int i;
+ char devname[48];
+
+ struct device *device;
+ size_t namelen;
+ struct xilly_unit *unit, *u;
+
+ unit = kzalloc(sizeof(*unit), GFP_KERNEL);
+
+ if (!unit)
+ return -ENOMEM;
+
+ mutex_lock(&unit_mutex);
+
+ if (!enumerate)
+ snprintf(unit->name, UNITNAMELEN, "%s", prefix);
+
+ for (i = 0; enumerate; i++) {
+ snprintf(unit->name, UNITNAMELEN, "%s_%02d",
+ prefix, i);
+
+ enumerate = false;
+ list_for_each_entry(u, &unit_list, list_entry)
+ if (!strcmp(unit->name, u->name)) {
+ enumerate = true;
+ break;
+ }
+ }
+
+ rc = alloc_chrdev_region(&mdev, 0, num_nodes, unit->name);
+
+ if (rc) {
+ dev_warn(dev, "Failed to obtain major/minors");
+ goto fail_obtain;
+ }
+
+ unit->major = MAJOR(mdev);
+ unit->lowest_minor = MINOR(mdev);
+ unit->num_nodes = num_nodes;
+ unit->private_data = private_data;
+
+ unit->cdev = cdev_alloc();
+ if (!unit->cdev) {
+ rc = -ENOMEM;
+ goto unregister_chrdev;
+ }
+ unit->cdev->ops = fops;
+ unit->cdev->owner = owner;
+
+ rc = cdev_add(unit->cdev, MKDEV(unit->major, unit->lowest_minor),
+ unit->num_nodes);
+ if (rc) {
+ dev_err(dev, "Failed to add cdev.\n");
+ /* kobject_put() is normally done by cdev_del() */
+ kobject_put(&unit->cdev->kobj);
+ goto unregister_chrdev;
+ }
+
+ for (i = 0; i < num_nodes; i++) {
+ namelen = strnlen(idt, len);
+
+ if (namelen == len) {
+ dev_err(dev, "IDT's list of names is too short. This is exceptionally weird, because its CRC is OK\n");
+ rc = -ENODEV;
+ goto unroll_device_create;
+ }
+
+ snprintf(devname, sizeof(devname), "%s_%s",
+ unit->name, idt);
+
+ len -= namelen + 1;
+ idt += namelen + 1;
+
+ device = device_create(xillybus_class,
+ NULL,
+ MKDEV(unit->major,
+ i + unit->lowest_minor),
+ NULL,
+ "%s", devname);
+
+ if (IS_ERR(device)) {
+ dev_err(dev, "Failed to create %s device. Aborting.\n",
+ devname);
+ rc = -ENODEV;
+ goto unroll_device_create;
+ }
+ }
+
+ if (len) {
+ dev_err(dev, "IDT's list of names is too long. This is exceptionally weird, because its CRC is OK\n");
+ rc = -ENODEV;
+ goto unroll_device_create;
+ }
+
+ list_add_tail(&unit->list_entry, &unit_list);
+
+ dev_info(dev, "Created %d device files.\n", num_nodes);
+
+ mutex_unlock(&unit_mutex);
+
+ return 0;
+
+unroll_device_create:
+ for (i--; i >= 0; i--)
+ device_destroy(xillybus_class, MKDEV(unit->major,
+ i + unit->lowest_minor));
+
+ cdev_del(unit->cdev);
+
+unregister_chrdev:
+ unregister_chrdev_region(MKDEV(unit->major, unit->lowest_minor),
+ unit->num_nodes);
+
+fail_obtain:
+ mutex_unlock(&unit_mutex);
+
+ kfree(unit);
+
+ return rc;
+}
+EXPORT_SYMBOL(xillybus_init_chrdev);
+
+void xillybus_cleanup_chrdev(void *private_data,
+ struct device *dev)
+{
+ int minor;
+ struct xilly_unit *unit;
+ bool found = false;
+
+ mutex_lock(&unit_mutex);
+
+ list_for_each_entry(unit, &unit_list, list_entry)
+ if (unit->private_data == private_data) {
+ found = true;
+ break;
+ }
+
+ if (!found) {
+ dev_err(dev, "Weird bug: Failed to find unit\n");
+ mutex_unlock(&unit_mutex);
+ return;
+ }
+
+ for (minor = unit->lowest_minor;
+ minor < (unit->lowest_minor + unit->num_nodes);
+ minor++)
+ device_destroy(xillybus_class, MKDEV(unit->major, minor));
+
+ cdev_del(unit->cdev);
+
+ unregister_chrdev_region(MKDEV(unit->major, unit->lowest_minor),
+ unit->num_nodes);
+
+ dev_info(dev, "Removed %d device files.\n",
+ unit->num_nodes);
+
+ list_del(&unit->list_entry);
+ kfree(unit);
+
+ mutex_unlock(&unit_mutex);
+}
+EXPORT_SYMBOL(xillybus_cleanup_chrdev);
+
+int xillybus_find_inode(struct inode *inode,
+ void **private_data, int *index)
+{
+ int minor = iminor(inode);
+ int major = imajor(inode);
+ struct xilly_unit *unit;
+ bool found = false;
+
+ mutex_lock(&unit_mutex);
+
+ list_for_each_entry(unit, &unit_list, list_entry)
+ if (unit->major == major &&
+ minor >= unit->lowest_minor &&
+ minor < (unit->lowest_minor + unit->num_nodes)) {
+ found = true;
+ break;
+ }
+
+ mutex_unlock(&unit_mutex);
+
+ if (!found)
+ return -ENODEV;
+
+ *private_data = unit->private_data;
+ *index = minor - unit->lowest_minor;
+
+ return 0;
+}
+EXPORT_SYMBOL(xillybus_find_inode);
+
+static int __init xillybus_class_init(void)
+{
+ xillybus_class = class_create(THIS_MODULE, "xillybus");
+
+ if (IS_ERR(xillybus_class)) {
+ pr_warn("Failed to register xillybus class\n");
+
+ return PTR_ERR(xillybus_class);
+ }
+ return 0;
+}
+
+static void __exit xillybus_class_exit(void)
+{
+ class_destroy(xillybus_class);
+}
+
+module_init(xillybus_class_init);
+module_exit(xillybus_class_exit);
diff --git a/drivers/char/xillybus/xillybus_class.h b/drivers/char/xillybus/xillybus_class.h
new file mode 100644
index 000000000000..5dbfdfc95c65
--- /dev/null
+++ b/drivers/char/xillybus/xillybus_class.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2021 Xillybus Ltd, http://www.xillybus.com
+ *
+ * Header file for the Xillybus class
+ */
+
+#ifndef __XILLYBUS_CLASS_H
+#define __XILLYBUS_CLASS_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+
+int xillybus_init_chrdev(struct device *dev,
+ const struct file_operations *fops,
+ struct module *owner,
+ void *private_data,
+ unsigned char *idt, unsigned int len,
+ int num_nodes,
+ const char *prefix, bool enumerate);
+
+void xillybus_cleanup_chrdev(void *private_data,
+ struct device *dev);
+
+int xillybus_find_inode(struct inode *inode,
+ void **private_data, int *index);
+
+#endif /* __XILLYBUS_CLASS_H */
diff --git a/drivers/char/xillybus/xillybus_core.c b/drivers/char/xillybus/xillybus_core.c
index 57fa68834981..931d0bf4cec6 100644
--- a/drivers/char/xillybus/xillybus_core.c
+++ b/drivers/char/xillybus/xillybus_core.c
@@ -21,7 +21,6 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/fs.h>
-#include <linux/cdev.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/crc32.h>
@@ -30,10 +29,10 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
#include "xillybus.h"
+#include "xillybus_class.h"
MODULE_DESCRIPTION("Xillybus core functions");
MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
-MODULE_VERSION("1.07");
MODULE_ALIAS("xillybus_core");
MODULE_LICENSE("GPL v2");
@@ -58,16 +57,6 @@ MODULE_LICENSE("GPL v2");
static const char xillyname[] = "xillybus";
-static struct class *xillybus_class;
-
-/*
- * ep_list_lock is the last lock to be taken; No other lock requests are
- * allowed while holding it. It merely protects list_of_endpoints, and not
- * the endpoints listed in it.
- */
-
-static LIST_HEAD(list_of_endpoints);
-static struct mutex ep_list_lock;
static struct workqueue_struct *xillybus_wq;
/*
@@ -570,10 +559,8 @@ static int xilly_scan_idt(struct xilly_endpoint *endpoint,
unsigned char *scan;
int len;
- scan = idt;
- idt_handle->idt = idt;
-
- scan++; /* Skip version number */
+ scan = idt + 1;
+ idt_handle->names = scan;
while ((scan <= end_of_idt) && *scan) {
while ((scan <= end_of_idt) && *scan++)
@@ -581,6 +568,8 @@ static int xilly_scan_idt(struct xilly_endpoint *endpoint,
count++;
}
+ idt_handle->names_len = scan - idt_handle->names;
+
scan++;
if (scan > end_of_idt) {
@@ -1407,36 +1396,20 @@ static ssize_t xillybus_write(struct file *filp, const char __user *userbuf,
static int xillybus_open(struct inode *inode, struct file *filp)
{
- int rc = 0;
+ int rc;
unsigned long flags;
- int minor = iminor(inode);
- int major = imajor(inode);
- struct xilly_endpoint *ep_iter, *endpoint = NULL;
+ struct xilly_endpoint *endpoint;
struct xilly_channel *channel;
+ int index;
- mutex_lock(&ep_list_lock);
-
- list_for_each_entry(ep_iter, &list_of_endpoints, ep_list) {
- if ((ep_iter->major == major) &&
- (minor >= ep_iter->lowest_minor) &&
- (minor < (ep_iter->lowest_minor +
- ep_iter->num_channels))) {
- endpoint = ep_iter;
- break;
- }
- }
- mutex_unlock(&ep_list_lock);
-
- if (!endpoint) {
- pr_err("xillybus: open() failed to find a device for major=%d and minor=%d\n",
- major, minor);
- return -ENODEV;
- }
+ rc = xillybus_find_inode(inode, (void **)&endpoint, &index);
+ if (rc)
+ return rc;
if (endpoint->fatal_error)
return -EIO;
- channel = endpoint->channels[1 + minor - endpoint->lowest_minor];
+ channel = endpoint->channels[1 + index];
filp->private_data = channel;
/*
@@ -1799,95 +1772,6 @@ static const struct file_operations xillybus_fops = {
.poll = xillybus_poll,
};
-static int xillybus_init_chrdev(struct xilly_endpoint *endpoint,
- const unsigned char *idt)
-{
- int rc;
- dev_t dev;
- int devnum, i, minor, major;
- char devname[48];
- struct device *device;
-
- rc = alloc_chrdev_region(&dev, 0, /* minor start */
- endpoint->num_channels,
- xillyname);
- if (rc) {
- dev_warn(endpoint->dev, "Failed to obtain major/minors");
- return rc;
- }
-
- endpoint->major = major = MAJOR(dev);
- endpoint->lowest_minor = minor = MINOR(dev);
-
- cdev_init(&endpoint->cdev, &xillybus_fops);
- endpoint->cdev.owner = endpoint->ephw->owner;
- rc = cdev_add(&endpoint->cdev, MKDEV(major, minor),
- endpoint->num_channels);
- if (rc) {
- dev_warn(endpoint->dev, "Failed to add cdev. Aborting.\n");
- goto unregister_chrdev;
- }
-
- idt++;
-
- for (i = minor, devnum = 0;
- devnum < endpoint->num_channels;
- devnum++, i++) {
- snprintf(devname, sizeof(devname)-1, "xillybus_%s", idt);
-
- devname[sizeof(devname)-1] = 0; /* Should never matter */
-
- while (*idt++)
- /* Skip to next */;
-
- device = device_create(xillybus_class,
- NULL,
- MKDEV(major, i),
- NULL,
- "%s", devname);
-
- if (IS_ERR(device)) {
- dev_warn(endpoint->dev,
- "Failed to create %s device. Aborting.\n",
- devname);
- rc = -ENODEV;
- goto unroll_device_create;
- }
- }
-
- dev_info(endpoint->dev, "Created %d device files.\n",
- endpoint->num_channels);
- return 0; /* succeed */
-
-unroll_device_create:
- devnum--; i--;
- for (; devnum >= 0; devnum--, i--)
- device_destroy(xillybus_class, MKDEV(major, i));
-
- cdev_del(&endpoint->cdev);
-unregister_chrdev:
- unregister_chrdev_region(MKDEV(major, minor), endpoint->num_channels);
-
- return rc;
-}
-
-static void xillybus_cleanup_chrdev(struct xilly_endpoint *endpoint)
-{
- int minor;
-
- for (minor = endpoint->lowest_minor;
- minor < (endpoint->lowest_minor + endpoint->num_channels);
- minor++)
- device_destroy(xillybus_class, MKDEV(endpoint->major, minor));
- cdev_del(&endpoint->cdev);
- unregister_chrdev_region(MKDEV(endpoint->major,
- endpoint->lowest_minor),
- endpoint->num_channels);
-
- dev_info(endpoint->dev, "Removed %d device files.\n",
- endpoint->num_channels);
-}
-
struct xilly_endpoint *xillybus_init_endpoint(struct pci_dev *pdev,
struct device *dev,
struct xilly_endpoint_hardware
@@ -2027,28 +1911,20 @@ int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint)
if (rc)
goto failed_idt;
- /*
- * endpoint is now completely configured. We put it on the list
- * available to open() before registering the char device(s)
- */
-
- mutex_lock(&ep_list_lock);
- list_add_tail(&endpoint->ep_list, &list_of_endpoints);
- mutex_unlock(&ep_list_lock);
+ rc = xillybus_init_chrdev(dev, &xillybus_fops,
+ endpoint->ephw->owner, endpoint,
+ idt_handle.names,
+ idt_handle.names_len,
+ endpoint->num_channels,
+ xillyname, false);
- rc = xillybus_init_chrdev(endpoint, idt_handle.idt);
if (rc)
- goto failed_chrdevs;
+ goto failed_idt;
devres_release_group(dev, bootstrap_resources);
return 0;
-failed_chrdevs:
- mutex_lock(&ep_list_lock);
- list_del(&endpoint->ep_list);
- mutex_unlock(&ep_list_lock);
-
failed_idt:
xilly_quiesce(endpoint);
flush_workqueue(xillybus_wq);
@@ -2059,11 +1935,7 @@ EXPORT_SYMBOL(xillybus_endpoint_discovery);
void xillybus_endpoint_remove(struct xilly_endpoint *endpoint)
{
- xillybus_cleanup_chrdev(endpoint);
-
- mutex_lock(&ep_list_lock);
- list_del(&endpoint->ep_list);
- mutex_unlock(&ep_list_lock);
+ xillybus_cleanup_chrdev(endpoint, endpoint->dev);
xilly_quiesce(endpoint);
@@ -2077,17 +1949,9 @@ EXPORT_SYMBOL(xillybus_endpoint_remove);
static int __init xillybus_init(void)
{
- mutex_init(&ep_list_lock);
-
- xillybus_class = class_create(THIS_MODULE, xillyname);
- if (IS_ERR(xillybus_class))
- return PTR_ERR(xillybus_class);
-
xillybus_wq = alloc_workqueue(xillyname, 0, 0);
- if (!xillybus_wq) {
- class_destroy(xillybus_class);
+ if (!xillybus_wq)
return -ENOMEM;
- }
return 0;
}
@@ -2096,8 +1960,6 @@ static void __exit xillybus_exit(void)
{
/* flush_workqueue() was called for each endpoint released */
destroy_workqueue(xillybus_wq);
-
- class_destroy(xillybus_class);
}
module_init(xillybus_init);
diff --git a/drivers/char/xillybus/xillybus_of.c b/drivers/char/xillybus/xillybus_of.c
index 96b6de8a30e5..1a20b286fd1d 100644
--- a/drivers/char/xillybus/xillybus_of.c
+++ b/drivers/char/xillybus/xillybus_of.c
@@ -17,7 +17,6 @@
MODULE_DESCRIPTION("Xillybus driver for Open Firmware");
MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
-MODULE_VERSION("1.06");
MODULE_ALIAS("xillybus_of");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/xillybus/xillybus_pcie.c b/drivers/char/xillybus/xillybus_pcie.c
index 18b0c392bc93..bdf1c366b4fc 100644
--- a/drivers/char/xillybus/xillybus_pcie.c
+++ b/drivers/char/xillybus/xillybus_pcie.c
@@ -14,7 +14,6 @@
MODULE_DESCRIPTION("Xillybus driver for PCIe");
MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
-MODULE_VERSION("1.06");
MODULE_ALIAS("xillybus_pcie");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/xillybus/xillyusb.c b/drivers/char/xillybus/xillyusb.c
new file mode 100644
index 000000000000..e7f88f35c702
--- /dev/null
+++ b/drivers/char/xillybus/xillyusb.c
@@ -0,0 +1,2259 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Xillybus Ltd, http://xillybus.com
+ *
+ * Driver for the XillyUSB FPGA/host framework.
+ *
+ * This driver interfaces with a special IP core in an FPGA, setting up
+ * a pipe between a hardware FIFO in the programmable logic and a device
+ * file in the host. The number of such pipes and their attributes are
+ * set up on the logic. This driver detects these automatically and
+ * creates the device files accordingly.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/crc32.h>
+#include <linux/poll.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+
+#include "xillybus_class.h"
+
+MODULE_DESCRIPTION("Driver for XillyUSB FPGA IP Core");
+MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
+MODULE_ALIAS("xillyusb");
+MODULE_LICENSE("GPL v2");
+
+#define XILLY_RX_TIMEOUT (10 * HZ / 1000)
+#define XILLY_RESPONSE_TIMEOUT (500 * HZ / 1000)
+
+#define BUF_SIZE_ORDER 4
+#define BUFNUM 8
+#define LOG2_IDT_FIFO_SIZE 16
+#define LOG2_INITIAL_FIFO_BUF_SIZE 16
+
+#define MSG_EP_NUM 1
+#define IN_EP_NUM 1
+
+static const char xillyname[] = "xillyusb";
+
+static unsigned int fifo_buf_order;
+
+#define USB_VENDOR_ID_XILINX 0x03fd
+#define USB_VENDOR_ID_ALTERA 0x09fb
+
+#define USB_PRODUCT_ID_XILLYUSB 0xebbe
+
+static const struct usb_device_id xillyusb_table[] = {
+ { USB_DEVICE(USB_VENDOR_ID_XILINX, USB_PRODUCT_ID_XILLYUSB) },
+ { USB_DEVICE(USB_VENDOR_ID_ALTERA, USB_PRODUCT_ID_XILLYUSB) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, xillyusb_table);
+
+struct xillyusb_dev;
+
+struct xillyfifo {
+ unsigned int bufsize; /* In bytes, always a power of 2 */
+ unsigned int bufnum;
+ unsigned int size; /* Lazy: Equals bufsize * bufnum */
+ unsigned int buf_order;
+
+ int fill; /* Number of bytes in the FIFO */
+ spinlock_t lock;
+ wait_queue_head_t waitq;
+
+ unsigned int readpos;
+ unsigned int readbuf;
+ unsigned int writepos;
+ unsigned int writebuf;
+ char **mem;
+};
+
+struct xillyusb_channel;
+
+struct xillyusb_endpoint {
+ struct xillyusb_dev *xdev;
+
+ struct mutex ep_mutex; /* serialize operations on endpoint */
+
+ struct list_head buffers;
+ struct list_head filled_buffers;
+ spinlock_t buffers_lock; /* protect these two lists */
+
+ unsigned int order;
+ unsigned int buffer_size;
+
+ unsigned int fill_mask;
+
+ int outstanding_urbs;
+
+ struct usb_anchor anchor;
+
+ struct xillyfifo fifo;
+
+ struct work_struct workitem;
+
+ bool shutting_down;
+ bool drained;
+ bool wake_on_drain;
+
+ u8 ep_num;
+};
+
+struct xillyusb_channel {
+ struct xillyusb_dev *xdev;
+
+ struct xillyfifo *in_fifo;
+ struct xillyusb_endpoint *out_ep;
+ struct mutex lock; /* protect @out_ep, @in_fifo, bit fields below */
+
+ struct mutex in_mutex; /* serialize fops on FPGA to host stream */
+ struct mutex out_mutex; /* serialize fops on host to FPGA stream */
+ wait_queue_head_t flushq;
+
+ int chan_idx;
+
+ u32 in_consumed_bytes;
+ u32 in_current_checkpoint;
+ u32 out_bytes;
+
+ unsigned int in_log2_element_size;
+ unsigned int out_log2_element_size;
+ unsigned int in_log2_fifo_size;
+ unsigned int out_log2_fifo_size;
+
+ unsigned int read_data_ok; /* EOF not arrived (yet) */
+ unsigned int poll_used;
+ unsigned int flushing;
+ unsigned int flushed;
+ unsigned int canceled;
+
+ /* Bit fields protected by @lock except for initialization */
+ unsigned readable:1;
+ unsigned writable:1;
+ unsigned open_for_read:1;
+ unsigned open_for_write:1;
+ unsigned in_synchronous:1;
+ unsigned out_synchronous:1;
+ unsigned in_seekable:1;
+ unsigned out_seekable:1;
+};
+
+struct xillybuffer {
+ struct list_head entry;
+ struct xillyusb_endpoint *ep;
+ void *buf;
+ unsigned int len;
+};
+
+struct xillyusb_dev {
+ struct xillyusb_channel *channels;
+
+ struct usb_device *udev;
+ struct device *dev; /* For dev_err() and such */
+ struct kref kref;
+ struct workqueue_struct *workq;
+
+ int error;
+ spinlock_t error_lock; /* protect @error */
+ struct work_struct wakeup_workitem;
+
+ int num_channels;
+
+ struct xillyusb_endpoint *msg_ep;
+ struct xillyusb_endpoint *in_ep;
+
+ struct mutex msg_mutex; /* serialize opcode transmission */
+ int in_bytes_left;
+ int leftover_chan_num;
+ unsigned int in_counter;
+ struct mutex process_in_mutex; /* synchronize wakeup_all() */
+};
+
+/* FPGA to host opcodes */
+enum {
+ OPCODE_DATA = 0,
+ OPCODE_QUIESCE_ACK = 1,
+ OPCODE_EOF = 2,
+ OPCODE_REACHED_CHECKPOINT = 3,
+ OPCODE_CANCELED_CHECKPOINT = 4,
+};
+
+/* Host to FPGA opcodes */
+enum {
+ OPCODE_QUIESCE = 0,
+ OPCODE_REQ_IDT = 1,
+ OPCODE_SET_CHECKPOINT = 2,
+ OPCODE_CLOSE = 3,
+ OPCODE_SET_PUSH = 4,
+ OPCODE_UPDATE_PUSH = 5,
+ OPCODE_CANCEL_CHECKPOINT = 6,
+ OPCODE_SET_ADDR = 7,
+};
+
+/*
+ * fifo_write() and fifo_read() are NOT reentrant (i.e. concurrent multiple
+ * calls to each on the same FIFO is not allowed) however it's OK to have
+ * threads calling each of the two functions once on the same FIFO, and
+ * at the same time.
+ */
+
+static int fifo_write(struct xillyfifo *fifo,
+ const void *data, unsigned int len,
+ int (*copier)(void *, const void *, int))
+{
+ unsigned int done = 0;
+ unsigned int todo = len;
+ unsigned int nmax;
+ unsigned int writepos = fifo->writepos;
+ unsigned int writebuf = fifo->writebuf;
+ unsigned long flags;
+ int rc;
+
+ nmax = fifo->size - READ_ONCE(fifo->fill);
+
+ while (1) {
+ unsigned int nrail = fifo->bufsize - writepos;
+ unsigned int n = min(todo, nmax);
+
+ if (n == 0) {
+ spin_lock_irqsave(&fifo->lock, flags);
+ fifo->fill += done;
+ spin_unlock_irqrestore(&fifo->lock, flags);
+
+ fifo->writepos = writepos;
+ fifo->writebuf = writebuf;
+
+ return done;
+ }
+
+ if (n > nrail)
+ n = nrail;
+
+ rc = (*copier)(fifo->mem[writebuf] + writepos, data + done, n);
+
+ if (rc)
+ return rc;
+
+ done += n;
+ todo -= n;
+
+ writepos += n;
+ nmax -= n;
+
+ if (writepos == fifo->bufsize) {
+ writepos = 0;
+ writebuf++;
+
+ if (writebuf == fifo->bufnum)
+ writebuf = 0;
+ }
+ }
+}
+
+static int fifo_read(struct xillyfifo *fifo,
+ void *data, unsigned int len,
+ int (*copier)(void *, const void *, int))
+{
+ unsigned int done = 0;
+ unsigned int todo = len;
+ unsigned int fill;
+ unsigned int readpos = fifo->readpos;
+ unsigned int readbuf = fifo->readbuf;
+ unsigned long flags;
+ int rc;
+
+ /*
+ * The spinlock here is necessary, because otherwise fifo->fill
+ * could have been increased by fifo_write() after writing data
+ * to the buffer, but this data would potentially not have been
+ * visible on this thread at the time the updated fifo->fill was.
+ * That could lead to reading invalid data.
+ */
+
+ spin_lock_irqsave(&fifo->lock, flags);
+ fill = fifo->fill;
+ spin_unlock_irqrestore(&fifo->lock, flags);
+
+ while (1) {
+ unsigned int nrail = fifo->bufsize - readpos;
+ unsigned int n = min(todo, fill);
+
+ if (n == 0) {
+ spin_lock_irqsave(&fifo->lock, flags);
+ fifo->fill -= done;
+ spin_unlock_irqrestore(&fifo->lock, flags);
+
+ fifo->readpos = readpos;
+ fifo->readbuf = readbuf;
+
+ return done;
+ }
+
+ if (n > nrail)
+ n = nrail;
+
+ rc = (*copier)(data + done, fifo->mem[readbuf] + readpos, n);
+
+ if (rc)
+ return rc;
+
+ done += n;
+ todo -= n;
+
+ readpos += n;
+ fill -= n;
+
+ if (readpos == fifo->bufsize) {
+ readpos = 0;
+ readbuf++;
+
+ if (readbuf == fifo->bufnum)
+ readbuf = 0;
+ }
+ }
+}
+
+/*
+ * These three wrapper functions are used as the @copier argument to
+ * fifo_write() and fifo_read(), so that they can work directly with
+ * user memory as well.
+ */
+
+static int xilly_copy_from_user(void *dst, const void *src, int n)
+{
+ if (copy_from_user(dst, (const void __user *)src, n))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int xilly_copy_to_user(void *dst, const void *src, int n)
+{
+ if (copy_to_user((void __user *)dst, src, n))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int xilly_memcpy(void *dst, const void *src, int n)
+{
+ memcpy(dst, src, n);
+
+ return 0;
+}
+
+static int fifo_init(struct xillyfifo *fifo,
+ unsigned int log2_size)
+{
+ unsigned int log2_bufnum;
+ unsigned int buf_order;
+ int i;
+
+ unsigned int log2_fifo_buf_size;
+
+retry:
+ log2_fifo_buf_size = fifo_buf_order + PAGE_SHIFT;
+
+ if (log2_size > log2_fifo_buf_size) {
+ log2_bufnum = log2_size - log2_fifo_buf_size;
+ buf_order = fifo_buf_order;
+ fifo->bufsize = 1 << log2_fifo_buf_size;
+ } else {
+ log2_bufnum = 0;
+ buf_order = (log2_size > PAGE_SHIFT) ?
+ log2_size - PAGE_SHIFT : 0;
+ fifo->bufsize = 1 << log2_size;
+ }
+
+ fifo->bufnum = 1 << log2_bufnum;
+ fifo->size = fifo->bufnum * fifo->bufsize;
+ fifo->buf_order = buf_order;
+
+ fifo->mem = kmalloc_array(fifo->bufnum, sizeof(void *), GFP_KERNEL);
+
+ if (!fifo->mem)
+ return -ENOMEM;
+
+ for (i = 0; i < fifo->bufnum; i++) {
+ fifo->mem[i] = (void *)
+ __get_free_pages(GFP_KERNEL, buf_order);
+
+ if (!fifo->mem[i])
+ goto memfail;
+ }
+
+ fifo->fill = 0;
+ fifo->readpos = 0;
+ fifo->readbuf = 0;
+ fifo->writepos = 0;
+ fifo->writebuf = 0;
+ spin_lock_init(&fifo->lock);
+ init_waitqueue_head(&fifo->waitq);
+ return 0;
+
+memfail:
+ for (i--; i >= 0; i--)
+ free_pages((unsigned long)fifo->mem[i], buf_order);
+
+ kfree(fifo->mem);
+ fifo->mem = NULL;
+
+ if (fifo_buf_order) {
+ fifo_buf_order--;
+ goto retry;
+ } else {
+ return -ENOMEM;
+ }
+}
+
+static void fifo_mem_release(struct xillyfifo *fifo)
+{
+ int i;
+
+ if (!fifo->mem)
+ return;
+
+ for (i = 0; i < fifo->bufnum; i++)
+ free_pages((unsigned long)fifo->mem[i], fifo->buf_order);
+
+ kfree(fifo->mem);
+}
+
+/*
+ * When endpoint_quiesce() returns, the endpoint has no URBs submitted,
+ * won't accept any new URB submissions, and its related work item doesn't
+ * and won't run anymore.
+ */
+
+static void endpoint_quiesce(struct xillyusb_endpoint *ep)
+{
+ mutex_lock(&ep->ep_mutex);
+ ep->shutting_down = true;
+ mutex_unlock(&ep->ep_mutex);
+
+ usb_kill_anchored_urbs(&ep->anchor);
+ cancel_work_sync(&ep->workitem);
+}
+
+/*
+ * Note that endpoint_dealloc() also frees fifo memory (if allocated), even
+ * though endpoint_alloc doesn't allocate that memory.
+ */
+
+static void endpoint_dealloc(struct xillyusb_endpoint *ep)
+{
+ struct list_head *this, *next;
+
+ fifo_mem_release(&ep->fifo);
+
+ /* Join @filled_buffers with @buffers to free these entries too */
+ list_splice(&ep->filled_buffers, &ep->buffers);
+
+ list_for_each_safe(this, next, &ep->buffers) {
+ struct xillybuffer *xb =
+ list_entry(this, struct xillybuffer, entry);
+
+ free_pages((unsigned long)xb->buf, ep->order);
+ kfree(xb);
+ }
+
+ kfree(ep);
+}
+
+static struct xillyusb_endpoint
+*endpoint_alloc(struct xillyusb_dev *xdev,
+ u8 ep_num,
+ void (*work)(struct work_struct *),
+ unsigned int order,
+ int bufnum)
+{
+ int i;
+
+ struct xillyusb_endpoint *ep;
+
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+
+ if (!ep)
+ return NULL;
+
+ INIT_LIST_HEAD(&ep->buffers);
+ INIT_LIST_HEAD(&ep->filled_buffers);
+
+ spin_lock_init(&ep->buffers_lock);
+ mutex_init(&ep->ep_mutex);
+
+ init_usb_anchor(&ep->anchor);
+ INIT_WORK(&ep->workitem, work);
+
+ ep->order = order;
+ ep->buffer_size = 1 << (PAGE_SHIFT + order);
+ ep->outstanding_urbs = 0;
+ ep->drained = true;
+ ep->wake_on_drain = false;
+ ep->xdev = xdev;
+ ep->ep_num = ep_num;
+ ep->shutting_down = false;
+
+ for (i = 0; i < bufnum; i++) {
+ struct xillybuffer *xb;
+ unsigned long addr;
+
+ xb = kzalloc(sizeof(*xb), GFP_KERNEL);
+
+ if (!xb) {
+ endpoint_dealloc(ep);
+ return NULL;
+ }
+
+ addr = __get_free_pages(GFP_KERNEL, order);
+
+ if (!addr) {
+ kfree(xb);
+ endpoint_dealloc(ep);
+ return NULL;
+ }
+
+ xb->buf = (void *)addr;
+ xb->ep = ep;
+ list_add_tail(&xb->entry, &ep->buffers);
+ }
+ return ep;
+}
+
+static void cleanup_dev(struct kref *kref)
+{
+ struct xillyusb_dev *xdev =
+ container_of(kref, struct xillyusb_dev, kref);
+
+ if (xdev->in_ep)
+ endpoint_dealloc(xdev->in_ep);
+
+ if (xdev->msg_ep)
+ endpoint_dealloc(xdev->msg_ep);
+
+ if (xdev->workq)
+ destroy_workqueue(xdev->workq);
+
+ kfree(xdev->channels); /* Argument may be NULL, and that's fine */
+ kfree(xdev);
+}
+
+/*
+ * @process_in_mutex is taken to ensure that bulk_in_work() won't call
+ * process_bulk_in() after wakeup_all()'s execution: The latter zeroes all
+ * @read_data_ok entries, which will make process_bulk_in() report false
+ * errors if executed. The mechanism relies on that xdev->error is assigned
+ * a non-zero value by report_io_error() prior to queueing wakeup_all(),
+ * which prevents bulk_in_work() from calling process_bulk_in().
+ *
+ * The fact that wakeup_all() and bulk_in_work() are queued on the same
+ * workqueue makes their concurrent execution very unlikely, however the
+ * kernel's API doesn't seem to ensure this strictly.
+ */
+
+static void wakeup_all(struct work_struct *work)
+{
+ int i;
+ struct xillyusb_dev *xdev = container_of(work, struct xillyusb_dev,
+ wakeup_workitem);
+
+ mutex_lock(&xdev->process_in_mutex);
+
+ for (i = 0; i < xdev->num_channels; i++) {
+ struct xillyusb_channel *chan = &xdev->channels[i];
+
+ mutex_lock(&chan->lock);
+
+ if (chan->in_fifo) {
+ /*
+ * Fake an EOF: Even if such arrives, it won't be
+ * processed.
+ */
+ chan->read_data_ok = 0;
+ wake_up_interruptible(&chan->in_fifo->waitq);
+ }
+
+ if (chan->out_ep)
+ wake_up_interruptible(&chan->out_ep->fifo.waitq);
+
+ mutex_unlock(&chan->lock);
+
+ wake_up_interruptible(&chan->flushq);
+ }
+
+ mutex_unlock(&xdev->process_in_mutex);
+
+ wake_up_interruptible(&xdev->msg_ep->fifo.waitq);
+
+ kref_put(&xdev->kref, cleanup_dev);
+}
+
+static void report_io_error(struct xillyusb_dev *xdev,
+ int errcode)
+{
+ unsigned long flags;
+ bool do_once = false;
+
+ spin_lock_irqsave(&xdev->error_lock, flags);
+ if (!xdev->error) {
+ xdev->error = errcode;
+ do_once = true;
+ }
+ spin_unlock_irqrestore(&xdev->error_lock, flags);
+
+ if (do_once) {
+ kref_get(&xdev->kref); /* xdev is used by work item */
+ queue_work(xdev->workq, &xdev->wakeup_workitem);
+ }
+}
+
+/*
+ * safely_assign_in_fifo() changes the value of chan->in_fifo and ensures
+ * the previous pointer is never used after its return.
+ */
+
+static void safely_assign_in_fifo(struct xillyusb_channel *chan,
+ struct xillyfifo *fifo)
+{
+ mutex_lock(&chan->lock);
+ chan->in_fifo = fifo;
+ mutex_unlock(&chan->lock);
+
+ flush_work(&chan->xdev->in_ep->workitem);
+}
+
+static void bulk_in_completer(struct urb *urb)
+{
+ struct xillybuffer *xb = urb->context;
+ struct xillyusb_endpoint *ep = xb->ep;
+ unsigned long flags;
+
+ if (urb->status) {
+ if (!(urb->status == -ENOENT ||
+ urb->status == -ECONNRESET ||
+ urb->status == -ESHUTDOWN))
+ report_io_error(ep->xdev, -EIO);
+
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+ list_add_tail(&xb->entry, &ep->buffers);
+ ep->outstanding_urbs--;
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+ return;
+ }
+
+ xb->len = urb->actual_length;
+
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+ list_add_tail(&xb->entry, &ep->filled_buffers);
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+ if (!ep->shutting_down)
+ queue_work(ep->xdev->workq, &ep->workitem);
+}
+
+static void bulk_out_completer(struct urb *urb)
+{
+ struct xillybuffer *xb = urb->context;
+ struct xillyusb_endpoint *ep = xb->ep;
+ unsigned long flags;
+
+ if (urb->status &&
+ (!(urb->status == -ENOENT ||
+ urb->status == -ECONNRESET ||
+ urb->status == -ESHUTDOWN)))
+ report_io_error(ep->xdev, -EIO);
+
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+ list_add_tail(&xb->entry, &ep->buffers);
+ ep->outstanding_urbs--;
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+ if (!ep->shutting_down)
+ queue_work(ep->xdev->workq, &ep->workitem);
+}
+
+static void try_queue_bulk_in(struct xillyusb_endpoint *ep)
+{
+ struct xillyusb_dev *xdev = ep->xdev;
+ struct xillybuffer *xb;
+ struct urb *urb;
+
+ int rc;
+ unsigned long flags;
+ unsigned int bufsize = ep->buffer_size;
+
+ mutex_lock(&ep->ep_mutex);
+
+ if (ep->shutting_down || xdev->error)
+ goto done;
+
+ while (1) {
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+
+ if (list_empty(&ep->buffers)) {
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+ goto done;
+ }
+
+ xb = list_first_entry(&ep->buffers, struct xillybuffer, entry);
+ list_del(&xb->entry);
+ ep->outstanding_urbs++;
+
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ report_io_error(xdev, -ENOMEM);
+ goto relist;
+ }
+
+ usb_fill_bulk_urb(urb, xdev->udev,
+ usb_rcvbulkpipe(xdev->udev, ep->ep_num),
+ xb->buf, bufsize, bulk_in_completer, xb);
+
+ usb_anchor_urb(urb, &ep->anchor);
+
+ rc = usb_submit_urb(urb, GFP_KERNEL);
+
+ if (rc) {
+ report_io_error(xdev, (rc == -ENOMEM) ? -ENOMEM :
+ -EIO);
+ goto unanchor;
+ }
+
+ usb_free_urb(urb); /* This just decrements reference count */
+ }
+
+unanchor:
+ usb_unanchor_urb(urb);
+ usb_free_urb(urb);
+
+relist:
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+ list_add_tail(&xb->entry, &ep->buffers);
+ ep->outstanding_urbs--;
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+done:
+ mutex_unlock(&ep->ep_mutex);
+}
+
+static void try_queue_bulk_out(struct xillyusb_endpoint *ep)
+{
+ struct xillyfifo *fifo = &ep->fifo;
+ struct xillyusb_dev *xdev = ep->xdev;
+ struct xillybuffer *xb;
+ struct urb *urb;
+
+ int rc;
+ unsigned int fill;
+ unsigned long flags;
+ bool do_wake = false;
+
+ mutex_lock(&ep->ep_mutex);
+
+ if (ep->shutting_down || xdev->error)
+ goto done;
+
+ fill = READ_ONCE(fifo->fill) & ep->fill_mask;
+
+ while (1) {
+ int count;
+ unsigned int max_read;
+
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+
+ /*
+ * Race conditions might have the FIFO filled while the
+ * endpoint is marked as drained here. That doesn't matter,
+ * because the sole purpose of @drained is to ensure that
+ * certain data has been sent on the USB channel before
+ * shutting it down. Hence knowing that the FIFO appears
+ * to be empty with no outstanding URBs at some moment
+ * is good enough.
+ */
+
+ if (!fill) {
+ ep->drained = !ep->outstanding_urbs;
+ if (ep->drained && ep->wake_on_drain)
+ do_wake = true;
+
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+ goto done;
+ }
+
+ ep->drained = false;
+
+ if ((fill < ep->buffer_size && ep->outstanding_urbs) ||
+ list_empty(&ep->buffers)) {
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+ goto done;
+ }
+
+ xb = list_first_entry(&ep->buffers, struct xillybuffer, entry);
+ list_del(&xb->entry);
+ ep->outstanding_urbs++;
+
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+ max_read = min(fill, ep->buffer_size);
+
+ count = fifo_read(&ep->fifo, xb->buf, max_read, xilly_memcpy);
+
+ /*
+ * xilly_memcpy always returns 0 => fifo_read can't fail =>
+ * count > 0
+ */
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ report_io_error(xdev, -ENOMEM);
+ goto relist;
+ }
+
+ usb_fill_bulk_urb(urb, xdev->udev,
+ usb_sndbulkpipe(xdev->udev, ep->ep_num),
+ xb->buf, count, bulk_out_completer, xb);
+
+ usb_anchor_urb(urb, &ep->anchor);
+
+ rc = usb_submit_urb(urb, GFP_KERNEL);
+
+ if (rc) {
+ report_io_error(xdev, (rc == -ENOMEM) ? -ENOMEM :
+ -EIO);
+ goto unanchor;
+ }
+
+ usb_free_urb(urb); /* This just decrements reference count */
+
+ fill -= count;
+ do_wake = true;
+ }
+
+unanchor:
+ usb_unanchor_urb(urb);
+ usb_free_urb(urb);
+
+relist:
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+ list_add_tail(&xb->entry, &ep->buffers);
+ ep->outstanding_urbs--;
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+done:
+ mutex_unlock(&ep->ep_mutex);
+
+ if (do_wake)
+ wake_up_interruptible(&fifo->waitq);
+}
+
+static void bulk_out_work(struct work_struct *work)
+{
+ struct xillyusb_endpoint *ep = container_of(work,
+ struct xillyusb_endpoint,
+ workitem);
+ try_queue_bulk_out(ep);
+}
+
+static int process_in_opcode(struct xillyusb_dev *xdev,
+ int opcode,
+ int chan_num)
+{
+ struct xillyusb_channel *chan;
+ struct device *dev = xdev->dev;
+ int chan_idx = chan_num >> 1;
+
+ if (chan_idx >= xdev->num_channels) {
+ dev_err(dev, "Received illegal channel ID %d from FPGA\n",
+ chan_num);
+ return -EIO;
+ }
+
+ chan = &xdev->channels[chan_idx];
+
+ switch (opcode) {
+ case OPCODE_EOF:
+ if (!chan->read_data_ok) {
+ dev_err(dev, "Received unexpected EOF for channel %d\n",
+ chan_num);
+ return -EIO;
+ }
+
+ /*
+ * A write memory barrier ensures that the FIFO's fill level
+ * is visible before read_data_ok turns zero, so the data in
+ * the FIFO isn't missed by the consumer.
+ */
+ smp_wmb();
+ WRITE_ONCE(chan->read_data_ok, 0);
+ wake_up_interruptible(&chan->in_fifo->waitq);
+ break;
+
+ case OPCODE_REACHED_CHECKPOINT:
+ chan->flushing = 0;
+ wake_up_interruptible(&chan->flushq);
+ break;
+
+ case OPCODE_CANCELED_CHECKPOINT:
+ chan->canceled = 1;
+ wake_up_interruptible(&chan->flushq);
+ break;
+
+ default:
+ dev_err(dev, "Received illegal opcode %d from FPGA\n",
+ opcode);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int process_bulk_in(struct xillybuffer *xb)
+{
+ struct xillyusb_endpoint *ep = xb->ep;
+ struct xillyusb_dev *xdev = ep->xdev;
+ struct device *dev = xdev->dev;
+ int dws = xb->len >> 2;
+ __le32 *p = xb->buf;
+ u32 ctrlword;
+ struct xillyusb_channel *chan;
+ struct xillyfifo *fifo;
+ int chan_num = 0, opcode;
+ int chan_idx;
+ int bytes, count, dwconsume;
+ int in_bytes_left = 0;
+ int rc;
+
+ if ((dws << 2) != xb->len) {
+ dev_err(dev, "Received BULK IN transfer with %d bytes, not a multiple of 4\n",
+ xb->len);
+ return -EIO;
+ }
+
+ if (xdev->in_bytes_left) {
+ bytes = min(xdev->in_bytes_left, dws << 2);
+ in_bytes_left = xdev->in_bytes_left - bytes;
+ chan_num = xdev->leftover_chan_num;
+ goto resume_leftovers;
+ }
+
+ while (dws) {
+ ctrlword = le32_to_cpu(*p++);
+ dws--;
+
+ chan_num = ctrlword & 0xfff;
+ count = (ctrlword >> 12) & 0x3ff;
+ opcode = (ctrlword >> 24) & 0xf;
+
+ if (opcode != OPCODE_DATA) {
+ unsigned int in_counter = xdev->in_counter++ & 0x3ff;
+
+ if (count != in_counter) {
+ dev_err(dev, "Expected opcode counter %d, got %d\n",
+ in_counter, count);
+ return -EIO;
+ }
+
+ rc = process_in_opcode(xdev, opcode, chan_num);
+
+ if (rc)
+ return rc;
+
+ continue;
+ }
+
+ bytes = min(count + 1, dws << 2);
+ in_bytes_left = count + 1 - bytes;
+
+resume_leftovers:
+ chan_idx = chan_num >> 1;
+
+ if (!(chan_num & 1) || chan_idx >= xdev->num_channels ||
+ !xdev->channels[chan_idx].read_data_ok) {
+ dev_err(dev, "Received illegal channel ID %d from FPGA\n",
+ chan_num);
+ return -EIO;
+ }
+ chan = &xdev->channels[chan_idx];
+
+ fifo = chan->in_fifo;
+
+ if (unlikely(!fifo))
+ return -EIO; /* We got really unexpected data */
+
+ if (bytes != fifo_write(fifo, p, bytes, xilly_memcpy)) {
+ dev_err(dev, "Misbehaving FPGA overflowed an upstream FIFO!\n");
+ return -EIO;
+ }
+
+ wake_up_interruptible(&fifo->waitq);
+
+ dwconsume = (bytes + 3) >> 2;
+ dws -= dwconsume;
+ p += dwconsume;
+ }
+
+ xdev->in_bytes_left = in_bytes_left;
+ xdev->leftover_chan_num = chan_num;
+ return 0;
+}
+
+static void bulk_in_work(struct work_struct *work)
+{
+ struct xillyusb_endpoint *ep =
+ container_of(work, struct xillyusb_endpoint, workitem);
+ struct xillyusb_dev *xdev = ep->xdev;
+ unsigned long flags;
+ struct xillybuffer *xb;
+ bool consumed = false;
+ int rc = 0;
+
+ mutex_lock(&xdev->process_in_mutex);
+
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+
+ while (1) {
+ if (rc || list_empty(&ep->filled_buffers)) {
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+ mutex_unlock(&xdev->process_in_mutex);
+
+ if (rc)
+ report_io_error(xdev, rc);
+ else if (consumed)
+ try_queue_bulk_in(ep);
+
+ return;
+ }
+
+ xb = list_first_entry(&ep->filled_buffers, struct xillybuffer,
+ entry);
+ list_del(&xb->entry);
+
+ spin_unlock_irqrestore(&ep->buffers_lock, flags);
+
+ consumed = true;
+
+ if (!xdev->error)
+ rc = process_bulk_in(xb);
+
+ spin_lock_irqsave(&ep->buffers_lock, flags);
+ list_add_tail(&xb->entry, &ep->buffers);
+ ep->outstanding_urbs--;
+ }
+}
+
+static int xillyusb_send_opcode(struct xillyusb_dev *xdev,
+ int chan_num, char opcode, u32 data)
+{
+ struct xillyusb_endpoint *ep = xdev->msg_ep;
+ struct xillyfifo *fifo = &ep->fifo;
+ __le32 msg[2];
+
+ int rc = 0;
+
+ msg[0] = cpu_to_le32((chan_num & 0xfff) |
+ ((opcode & 0xf) << 24));
+ msg[1] = cpu_to_le32(data);
+
+ mutex_lock(&xdev->msg_mutex);
+
+ /*
+ * The wait queue is woken with the interruptible variant, so the
+ * wait function matches, however returning because of an interrupt
+ * will mess things up considerably, in particular when the caller is
+ * the release method. And the xdev->error part prevents being stuck
+ * forever in the event of a bizarre hardware bug: Pull the USB plug.
+ */
+
+ while (wait_event_interruptible(fifo->waitq,
+ fifo->fill <= (fifo->size - 8) ||
+ xdev->error))
+ ; /* Empty loop */
+
+ if (xdev->error) {
+ rc = xdev->error;
+ goto unlock_done;
+ }
+
+ fifo_write(fifo, (void *)msg, 8, xilly_memcpy);
+
+ try_queue_bulk_out(ep);
+
+unlock_done:
+ mutex_unlock(&xdev->msg_mutex);
+
+ return rc;
+}
+
+/*
+ * Note that flush_downstream() merely waits for the data to arrive to
+ * the application logic at the FPGA -- unlike PCIe Xillybus' counterpart,
+ * it does nothing to make it happen (and neither is it necessary).
+ *
+ * This function is not reentrant for the same @chan, but this is covered
+ * by the fact that for any given @chan, it's called either by the open,
+ * write, llseek and flush fops methods, which can't run in parallel (and the
+ * write + flush and llseek method handlers are protected with out_mutex).
+ *
+ * chan->flushed is there to avoid multiple flushes at the same position,
+ * in particular as a result of programs that close the file descriptor
+ * e.g. after a dup2() for redirection.
+ */
+
+static int flush_downstream(struct xillyusb_channel *chan,
+ long timeout,
+ bool interruptible)
+{
+ struct xillyusb_dev *xdev = chan->xdev;
+ int chan_num = chan->chan_idx << 1;
+ long deadline, left_to_sleep;
+ int rc;
+
+ if (chan->flushed)
+ return 0;
+
+ deadline = jiffies + 1 + timeout;
+
+ if (chan->flushing) {
+ long cancel_deadline = jiffies + 1 + XILLY_RESPONSE_TIMEOUT;
+
+ chan->canceled = 0;
+ rc = xillyusb_send_opcode(xdev, chan_num,
+ OPCODE_CANCEL_CHECKPOINT, 0);
+
+ if (rc)
+ return rc; /* Only real error, never -EINTR */
+
+ /* Ignoring interrupts. Cancellation must be handled */
+ while (!chan->canceled) {
+ left_to_sleep = cancel_deadline - ((long)jiffies);
+
+ if (left_to_sleep <= 0) {
+ report_io_error(xdev, -EIO);
+ return -EIO;
+ }
+
+ rc = wait_event_interruptible_timeout(chan->flushq,
+ chan->canceled ||
+ xdev->error,
+ left_to_sleep);
+
+ if (xdev->error)
+ return xdev->error;
+ }
+ }
+
+ chan->flushing = 1;
+
+ /*
+ * The checkpoint is given in terms of data elements, not bytes. As
+ * a result, if less than an element's worth of data is stored in the
+ * FIFO, it's not flushed, including the flush before closing, which
+ * means that such data is lost. This is consistent with PCIe Xillybus.
+ */
+
+ rc = xillyusb_send_opcode(xdev, chan_num,
+ OPCODE_SET_CHECKPOINT,
+ chan->out_bytes >>
+ chan->out_log2_element_size);
+
+ if (rc)
+ return rc; /* Only real error, never -EINTR */
+
+ if (!timeout) {
+ while (chan->flushing) {
+ rc = wait_event_interruptible(chan->flushq,
+ !chan->flushing ||
+ xdev->error);
+ if (xdev->error)
+ return xdev->error;
+
+ if (interruptible && rc)
+ return -EINTR;
+ }
+
+ goto done;
+ }
+
+ while (chan->flushing) {
+ left_to_sleep = deadline - ((long)jiffies);
+
+ if (left_to_sleep <= 0)
+ return -ETIMEDOUT;
+
+ rc = wait_event_interruptible_timeout(chan->flushq,
+ !chan->flushing ||
+ xdev->error,
+ left_to_sleep);
+
+ if (xdev->error)
+ return xdev->error;
+
+ if (interruptible && rc < 0)
+ return -EINTR;
+ }
+
+done:
+ chan->flushed = 1;
+ return 0;
+}
+
+/* request_read_anything(): Ask the FPGA for any little amount of data */
+static int request_read_anything(struct xillyusb_channel *chan,
+ char opcode)
+{
+ struct xillyusb_dev *xdev = chan->xdev;
+ unsigned int sh = chan->in_log2_element_size;
+ int chan_num = (chan->chan_idx << 1) | 1;
+ u32 mercy = chan->in_consumed_bytes + (2 << sh) - 1;
+
+ return xillyusb_send_opcode(xdev, chan_num, opcode, mercy >> sh);
+}
+
+static int xillyusb_open(struct inode *inode, struct file *filp)
+{
+ struct xillyusb_dev *xdev;
+ struct xillyusb_channel *chan;
+ struct xillyfifo *in_fifo = NULL;
+ struct xillyusb_endpoint *out_ep = NULL;
+ int rc;
+ int index;
+
+ rc = xillybus_find_inode(inode, (void **)&xdev, &index);
+ if (rc)
+ return rc;
+
+ chan = &xdev->channels[index];
+ filp->private_data = chan;
+
+ mutex_lock(&chan->lock);
+
+ rc = -ENODEV;
+
+ if (xdev->error)
+ goto unmutex_fail;
+
+ if (((filp->f_mode & FMODE_READ) && !chan->readable) ||
+ ((filp->f_mode & FMODE_WRITE) && !chan->writable))
+ goto unmutex_fail;
+
+ if ((filp->f_flags & O_NONBLOCK) && (filp->f_mode & FMODE_READ) &&
+ chan->in_synchronous) {
+ dev_err(xdev->dev,
+ "open() failed: O_NONBLOCK not allowed for read on this device\n");
+ goto unmutex_fail;
+ }
+
+ if ((filp->f_flags & O_NONBLOCK) && (filp->f_mode & FMODE_WRITE) &&
+ chan->out_synchronous) {
+ dev_err(xdev->dev,
+ "open() failed: O_NONBLOCK not allowed for write on this device\n");
+ goto unmutex_fail;
+ }
+
+ rc = -EBUSY;
+
+ if (((filp->f_mode & FMODE_READ) && chan->open_for_read) ||
+ ((filp->f_mode & FMODE_WRITE) && chan->open_for_write))
+ goto unmutex_fail;
+
+ kref_get(&xdev->kref);
+
+ if (filp->f_mode & FMODE_READ)
+ chan->open_for_read = 1;
+
+ if (filp->f_mode & FMODE_WRITE)
+ chan->open_for_write = 1;
+
+ mutex_unlock(&chan->lock);
+
+ if (filp->f_mode & FMODE_WRITE) {
+ out_ep = endpoint_alloc(xdev,
+ (chan->chan_idx + 2) | USB_DIR_OUT,
+ bulk_out_work, BUF_SIZE_ORDER, BUFNUM);
+
+ if (!out_ep) {
+ rc = -ENOMEM;
+ goto unopen;
+ }
+
+ rc = fifo_init(&out_ep->fifo, chan->out_log2_fifo_size);
+
+ if (rc)
+ goto late_unopen;
+
+ out_ep->fill_mask = -(1 << chan->out_log2_element_size);
+ chan->out_bytes = 0;
+ chan->flushed = 0;
+
+ /*
+ * Sending a flush request to a previously closed stream
+ * effectively opens it, and also waits until the command is
+ * confirmed by the FPGA. The latter is necessary because the
+ * data is sent through a separate BULK OUT endpoint, and the
+ * xHCI controller is free to reorder transmissions.
+ *
+ * This can't go wrong unless there's a serious hardware error
+ * (or the computer is stuck for 500 ms?)
+ */
+ rc = flush_downstream(chan, XILLY_RESPONSE_TIMEOUT, false);
+
+ if (rc == -ETIMEDOUT) {
+ rc = -EIO;
+ report_io_error(xdev, rc);
+ }
+
+ if (rc)
+ goto late_unopen;
+ }
+
+ if (filp->f_mode & FMODE_READ) {
+ in_fifo = kzalloc(sizeof(*in_fifo), GFP_KERNEL);
+
+ if (!in_fifo) {
+ rc = -ENOMEM;
+ goto late_unopen;
+ }
+
+ rc = fifo_init(in_fifo, chan->in_log2_fifo_size);
+
+ if (rc) {
+ kfree(in_fifo);
+ goto late_unopen;
+ }
+ }
+
+ mutex_lock(&chan->lock);
+ if (in_fifo) {
+ chan->in_fifo = in_fifo;
+ chan->read_data_ok = 1;
+ }
+ if (out_ep)
+ chan->out_ep = out_ep;
+ mutex_unlock(&chan->lock);
+
+ if (in_fifo) {
+ u32 in_checkpoint = 0;
+
+ if (!chan->in_synchronous)
+ in_checkpoint = in_fifo->size >>
+ chan->in_log2_element_size;
+
+ chan->in_consumed_bytes = 0;
+ chan->poll_used = 0;
+ chan->in_current_checkpoint = in_checkpoint;
+ rc = xillyusb_send_opcode(xdev, (chan->chan_idx << 1) | 1,
+ OPCODE_SET_CHECKPOINT,
+ in_checkpoint);
+
+ if (rc) /* Failure guarantees that opcode wasn't sent */
+ goto unfifo;
+
+ /*
+ * In non-blocking mode, request the FPGA to send any data it
+ * has right away. Otherwise, the first read() will always
+ * return -EAGAIN, which is OK strictly speaking, but ugly.
+ * Checking and unrolling if this fails isn't worth the
+ * effort -- the error is propagated to the first read()
+ * anyhow.
+ */
+ if (filp->f_flags & O_NONBLOCK)
+ request_read_anything(chan, OPCODE_SET_PUSH);
+ }
+
+ return 0;
+
+unfifo:
+ chan->read_data_ok = 0;
+ safely_assign_in_fifo(chan, NULL);
+ fifo_mem_release(in_fifo);
+ kfree(in_fifo);
+
+ if (out_ep) {
+ mutex_lock(&chan->lock);
+ chan->out_ep = NULL;
+ mutex_unlock(&chan->lock);
+ }
+
+late_unopen:
+ if (out_ep)
+ endpoint_dealloc(out_ep);
+
+unopen:
+ mutex_lock(&chan->lock);
+
+ if (filp->f_mode & FMODE_READ)
+ chan->open_for_read = 0;
+
+ if (filp->f_mode & FMODE_WRITE)
+ chan->open_for_write = 0;
+
+ mutex_unlock(&chan->lock);
+
+ kref_put(&xdev->kref, cleanup_dev);
+
+ return rc;
+
+unmutex_fail:
+ mutex_unlock(&chan->lock);
+ return rc;
+}
+
+static ssize_t xillyusb_read(struct file *filp, char __user *userbuf,
+ size_t count, loff_t *f_pos)
+{
+ struct xillyusb_channel *chan = filp->private_data;
+ struct xillyusb_dev *xdev = chan->xdev;
+ struct xillyfifo *fifo = chan->in_fifo;
+ int chan_num = (chan->chan_idx << 1) | 1;
+
+ long deadline, left_to_sleep;
+ int bytes_done = 0;
+ bool sent_set_push = false;
+ int rc;
+
+ deadline = jiffies + 1 + XILLY_RX_TIMEOUT;
+
+ rc = mutex_lock_interruptible(&chan->in_mutex);
+
+ if (rc)
+ return rc;
+
+ while (1) {
+ u32 fifo_checkpoint_bytes, complete_checkpoint_bytes;
+ u32 complete_checkpoint, fifo_checkpoint;
+ u32 checkpoint;
+ s32 diff, leap;
+ unsigned int sh = chan->in_log2_element_size;
+ bool checkpoint_for_complete;
+
+ rc = fifo_read(fifo, (__force void *)userbuf + bytes_done,
+ count - bytes_done, xilly_copy_to_user);
+
+ if (rc < 0)
+ break;
+
+ bytes_done += rc;
+ chan->in_consumed_bytes += rc;
+
+ left_to_sleep = deadline - ((long)jiffies);
+
+ /*
+ * Some 32-bit arithmetic that may wrap. Note that
+ * complete_checkpoint is rounded up to the closest element
+ * boundary, because the read() can't be completed otherwise.
+ * fifo_checkpoint_bytes is rounded down, because it protects
+ * in_fifo from overflowing.
+ */
+
+ fifo_checkpoint_bytes = chan->in_consumed_bytes + fifo->size;
+ complete_checkpoint_bytes =
+ chan->in_consumed_bytes + count - bytes_done;
+
+ fifo_checkpoint = fifo_checkpoint_bytes >> sh;
+ complete_checkpoint =
+ (complete_checkpoint_bytes + (1 << sh) - 1) >> sh;
+
+ diff = (fifo_checkpoint - complete_checkpoint) << sh;
+
+ if (chan->in_synchronous && diff >= 0) {
+ checkpoint = complete_checkpoint;
+ checkpoint_for_complete = true;
+ } else {
+ checkpoint = fifo_checkpoint;
+ checkpoint_for_complete = false;
+ }
+
+ leap = (checkpoint - chan->in_current_checkpoint) << sh;
+
+ /*
+ * To prevent flooding of OPCODE_SET_CHECKPOINT commands as
+ * data is consumed, it's issued only if it moves the
+ * checkpoint by at least an 8th of the FIFO's size, or if
+ * it's necessary to complete the number of bytes requested by
+ * the read() call.
+ *
+ * chan->read_data_ok is checked to spare an unnecessary
+ * submission after receiving EOF, however it's harmless if
+ * such slips away.
+ */
+
+ if (chan->read_data_ok &&
+ (leap > (fifo->size >> 3) ||
+ (checkpoint_for_complete && leap > 0))) {
+ chan->in_current_checkpoint = checkpoint;
+ rc = xillyusb_send_opcode(xdev, chan_num,
+ OPCODE_SET_CHECKPOINT,
+ checkpoint);
+
+ if (rc)
+ break;
+ }
+
+ if (bytes_done == count ||
+ (left_to_sleep <= 0 && bytes_done))
+ break;
+
+ /*
+ * Reaching here means that the FIFO was empty when
+ * fifo_read() returned, but not necessarily right now. Error
+ * and EOF are checked and reported only now, so that no data
+ * that managed its way to the FIFO is lost.
+ */
+
+ if (!READ_ONCE(chan->read_data_ok)) { /* FPGA has sent EOF */
+ /* Has data slipped into the FIFO since fifo_read()? */
+ smp_rmb();
+ if (READ_ONCE(fifo->fill))
+ continue;
+
+ rc = 0;
+ break;
+ }
+
+ if (xdev->error) {
+ rc = xdev->error;
+ break;
+ }
+
+ if (filp->f_flags & O_NONBLOCK) {
+ rc = -EAGAIN;
+ break;
+ }
+
+ if (!sent_set_push) {
+ rc = xillyusb_send_opcode(xdev, chan_num,
+ OPCODE_SET_PUSH,
+ complete_checkpoint);
+
+ if (rc)
+ break;
+
+ sent_set_push = true;
+ }
+
+ if (left_to_sleep > 0) {
+ /*
+ * Note that when xdev->error is set (e.g. when the
+ * device is unplugged), read_data_ok turns zero and
+ * fifo->waitq is awaken.
+ * Therefore no special attention to xdev->error.
+ */
+
+ rc = wait_event_interruptible_timeout
+ (fifo->waitq,
+ fifo->fill || !chan->read_data_ok,
+ left_to_sleep);
+ } else { /* bytes_done == 0 */
+ /* Tell FPGA to send anything it has */
+ rc = request_read_anything(chan, OPCODE_UPDATE_PUSH);
+
+ if (rc)
+ break;
+
+ rc = wait_event_interruptible
+ (fifo->waitq,
+ fifo->fill || !chan->read_data_ok);
+ }
+
+ if (rc < 0) {
+ rc = -EINTR;
+ break;
+ }
+ }
+
+ if (((filp->f_flags & O_NONBLOCK) || chan->poll_used) &&
+ !READ_ONCE(fifo->fill))
+ request_read_anything(chan, OPCODE_SET_PUSH);
+
+ mutex_unlock(&chan->in_mutex);
+
+ if (bytes_done)
+ return bytes_done;
+
+ return rc;
+}
+
+static int xillyusb_flush(struct file *filp, fl_owner_t id)
+{
+ struct xillyusb_channel *chan = filp->private_data;
+ int rc;
+
+ if (!(filp->f_mode & FMODE_WRITE))
+ return 0;
+
+ rc = mutex_lock_interruptible(&chan->out_mutex);
+
+ if (rc)
+ return rc;
+
+ /*
+ * One second's timeout on flushing. Interrupts are ignored, because if
+ * the user pressed CTRL-C, that interrupt will still be in flight by
+ * the time we reach here, and the opportunity to flush is lost.
+ */
+ rc = flush_downstream(chan, HZ, false);
+
+ mutex_unlock(&chan->out_mutex);
+
+ if (rc == -ETIMEDOUT) {
+ /* The things you do to use dev_warn() and not pr_warn() */
+ struct xillyusb_dev *xdev = chan->xdev;
+
+ mutex_lock(&chan->lock);
+ if (!xdev->error)
+ dev_warn(xdev->dev,
+ "Timed out while flushing. Output data may be lost.\n");
+ mutex_unlock(&chan->lock);
+ }
+
+ return rc;
+}
+
+static ssize_t xillyusb_write(struct file *filp, const char __user *userbuf,
+ size_t count, loff_t *f_pos)
+{
+ struct xillyusb_channel *chan = filp->private_data;
+ struct xillyusb_dev *xdev = chan->xdev;
+ struct xillyfifo *fifo = &chan->out_ep->fifo;
+ int rc;
+
+ rc = mutex_lock_interruptible(&chan->out_mutex);
+
+ if (rc)
+ return rc;
+
+ while (1) {
+ if (xdev->error) {
+ rc = xdev->error;
+ break;
+ }
+
+ if (count == 0)
+ break;
+
+ rc = fifo_write(fifo, (__force void *)userbuf, count,
+ xilly_copy_from_user);
+
+ if (rc != 0)
+ break;
+
+ if (filp->f_flags & O_NONBLOCK) {
+ rc = -EAGAIN;
+ break;
+ }
+
+ if (wait_event_interruptible
+ (fifo->waitq,
+ fifo->fill != fifo->size || xdev->error)) {
+ rc = -EINTR;
+ break;
+ }
+ }
+
+ if (rc < 0)
+ goto done;
+
+ chan->out_bytes += rc;
+
+ if (rc) {
+ try_queue_bulk_out(chan->out_ep);
+ chan->flushed = 0;
+ }
+
+ if (chan->out_synchronous) {
+ int flush_rc = flush_downstream(chan, 0, true);
+
+ if (flush_rc && !rc)
+ rc = flush_rc;
+ }
+
+done:
+ mutex_unlock(&chan->out_mutex);
+
+ return rc;
+}
+
+static int xillyusb_release(struct inode *inode, struct file *filp)
+{
+ struct xillyusb_channel *chan = filp->private_data;
+ struct xillyusb_dev *xdev = chan->xdev;
+ int rc_read = 0, rc_write = 0;
+
+ if (filp->f_mode & FMODE_READ) {
+ struct xillyfifo *in_fifo = chan->in_fifo;
+
+ rc_read = xillyusb_send_opcode(xdev, (chan->chan_idx << 1) | 1,
+ OPCODE_CLOSE, 0);
+ /*
+ * If rc_read is nonzero, xdev->error indicates a global
+ * device error. The error is reported later, so that
+ * resources are freed.
+ *
+ * Looping on wait_event_interruptible() kinda breaks the idea
+ * of being interruptible, and this should have been
+ * wait_event(). Only it's being waken with
+ * wake_up_interruptible() for the sake of other uses. If
+ * there's a global device error, chan->read_data_ok is
+ * deasserted and the wait queue is awaken, so this is covered.
+ */
+
+ while (wait_event_interruptible(in_fifo->waitq,
+ !chan->read_data_ok))
+ ; /* Empty loop */
+
+ safely_assign_in_fifo(chan, NULL);
+ fifo_mem_release(in_fifo);
+ kfree(in_fifo);
+
+ mutex_lock(&chan->lock);
+ chan->open_for_read = 0;
+ mutex_unlock(&chan->lock);
+ }
+
+ if (filp->f_mode & FMODE_WRITE) {
+ struct xillyusb_endpoint *ep = chan->out_ep;
+ /*
+ * chan->flushing isn't zeroed. If the pre-release flush timed
+ * out, a cancel request will be sent before the next
+ * OPCODE_SET_CHECKPOINT (i.e. when the file is opened again).
+ * This is despite that the FPGA forgets about the checkpoint
+ * request as the file closes. Still, in an exceptional race
+ * condition, the FPGA could send an OPCODE_REACHED_CHECKPOINT
+ * just before closing that would reach the host after the
+ * file has re-opened.
+ */
+
+ mutex_lock(&chan->lock);
+ chan->out_ep = NULL;
+ mutex_unlock(&chan->lock);
+
+ endpoint_quiesce(ep);
+ endpoint_dealloc(ep);
+
+ /* See comments on rc_read above */
+ rc_write = xillyusb_send_opcode(xdev, chan->chan_idx << 1,
+ OPCODE_CLOSE, 0);
+
+ mutex_lock(&chan->lock);
+ chan->open_for_write = 0;
+ mutex_unlock(&chan->lock);
+ }
+
+ kref_put(&xdev->kref, cleanup_dev);
+
+ return rc_read ? rc_read : rc_write;
+}
+
+/*
+ * Xillybus' API allows device nodes to be seekable, giving the user
+ * application access to a RAM array on the FPGA (or logic emulating it).
+ */
+
+static loff_t xillyusb_llseek(struct file *filp, loff_t offset, int whence)
+{
+ struct xillyusb_channel *chan = filp->private_data;
+ struct xillyusb_dev *xdev = chan->xdev;
+ loff_t pos = filp->f_pos;
+ int rc = 0;
+ unsigned int log2_element_size = chan->readable ?
+ chan->in_log2_element_size : chan->out_log2_element_size;
+
+ /*
+ * Take both mutexes not allowing interrupts, since it seems like
+ * common applications don't expect an -EINTR here. Besides, multiple
+ * access to a single file descriptor on seekable devices is a mess
+ * anyhow.
+ */
+
+ mutex_lock(&chan->out_mutex);
+ mutex_lock(&chan->in_mutex);
+
+ switch (whence) {
+ case SEEK_SET:
+ pos = offset;
+ break;
+ case SEEK_CUR:
+ pos += offset;
+ break;
+ case SEEK_END:
+ pos = offset; /* Going to the end => to the beginning */
+ break;
+ default:
+ rc = -EINVAL;
+ goto end;
+ }
+
+ /* In any case, we must finish on an element boundary */
+ if (pos & ((1 << log2_element_size) - 1)) {
+ rc = -EINVAL;
+ goto end;
+ }
+
+ rc = xillyusb_send_opcode(xdev, chan->chan_idx << 1,
+ OPCODE_SET_ADDR,
+ pos >> log2_element_size);
+
+ if (rc)
+ goto end;
+
+ if (chan->writable) {
+ chan->flushed = 0;
+ rc = flush_downstream(chan, HZ, false);
+ }
+
+end:
+ mutex_unlock(&chan->out_mutex);
+ mutex_unlock(&chan->in_mutex);
+
+ if (rc) /* Return error after releasing mutexes */
+ return rc;
+
+ filp->f_pos = pos;
+
+ return pos;
+}
+
+static __poll_t xillyusb_poll(struct file *filp, poll_table *wait)
+{
+ struct xillyusb_channel *chan = filp->private_data;
+ __poll_t mask = 0;
+
+ if (chan->in_fifo)
+ poll_wait(filp, &chan->in_fifo->waitq, wait);
+
+ if (chan->out_ep)
+ poll_wait(filp, &chan->out_ep->fifo.waitq, wait);
+
+ /*
+ * If this is the first time poll() is called, and the file is
+ * readable, set the relevant flag. Also tell the FPGA to send all it
+ * has, to kickstart the mechanism that ensures there's always some
+ * data in in_fifo unless the stream is dry end-to-end. Note that the
+ * first poll() may not return a EPOLLIN, even if there's data on the
+ * FPGA. Rather, the data will arrive soon, and trigger the relevant
+ * wait queue.
+ */
+
+ if (!chan->poll_used && chan->in_fifo) {
+ chan->poll_used = 1;
+ request_read_anything(chan, OPCODE_SET_PUSH);
+ }
+
+ /*
+ * poll() won't play ball regarding read() channels which
+ * are synchronous. Allowing that will create situations where data has
+ * been delivered at the FPGA, and users expecting select() to wake up,
+ * which it may not. So make it never work.
+ */
+
+ if (chan->in_fifo && !chan->in_synchronous &&
+ (READ_ONCE(chan->in_fifo->fill) || !chan->read_data_ok))
+ mask |= EPOLLIN | EPOLLRDNORM;
+
+ if (chan->out_ep &&
+ (READ_ONCE(chan->out_ep->fifo.fill) != chan->out_ep->fifo.size))
+ mask |= EPOLLOUT | EPOLLWRNORM;
+
+ if (chan->xdev->error)
+ mask |= EPOLLERR;
+
+ return mask;
+}
+
+static const struct file_operations xillyusb_fops = {
+ .owner = THIS_MODULE,
+ .read = xillyusb_read,
+ .write = xillyusb_write,
+ .open = xillyusb_open,
+ .flush = xillyusb_flush,
+ .release = xillyusb_release,
+ .llseek = xillyusb_llseek,
+ .poll = xillyusb_poll,
+};
+
+static int xillyusb_setup_base_eps(struct xillyusb_dev *xdev)
+{
+ xdev->msg_ep = endpoint_alloc(xdev, MSG_EP_NUM | USB_DIR_OUT,
+ bulk_out_work, 1, 2);
+ if (!xdev->msg_ep)
+ return -ENOMEM;
+
+ if (fifo_init(&xdev->msg_ep->fifo, 13)) /* 8 kiB */
+ goto dealloc;
+
+ xdev->msg_ep->fill_mask = -8; /* 8 bytes granularity */
+
+ xdev->in_ep = endpoint_alloc(xdev, IN_EP_NUM | USB_DIR_IN,
+ bulk_in_work, BUF_SIZE_ORDER, BUFNUM);
+ if (!xdev->in_ep)
+ goto dealloc;
+
+ try_queue_bulk_in(xdev->in_ep);
+
+ return 0;
+
+dealloc:
+ endpoint_dealloc(xdev->msg_ep); /* Also frees FIFO mem if allocated */
+ return -ENOMEM;
+}
+
+static int setup_channels(struct xillyusb_dev *xdev,
+ __le16 *chandesc,
+ int num_channels)
+{
+ struct xillyusb_channel *chan;
+ int i;
+
+ chan = kcalloc(num_channels, sizeof(*chan), GFP_KERNEL);
+ if (!chan)
+ return -ENOMEM;
+
+ xdev->channels = chan;
+
+ for (i = 0; i < num_channels; i++, chan++) {
+ unsigned int in_desc = le16_to_cpu(*chandesc++);
+ unsigned int out_desc = le16_to_cpu(*chandesc++);
+
+ chan->xdev = xdev;
+ mutex_init(&chan->in_mutex);
+ mutex_init(&chan->out_mutex);
+ mutex_init(&chan->lock);
+ init_waitqueue_head(&chan->flushq);
+
+ chan->chan_idx = i;
+
+ if (in_desc & 0x80) { /* Entry is valid */
+ chan->readable = 1;
+ chan->in_synchronous = !!(in_desc & 0x40);
+ chan->in_seekable = !!(in_desc & 0x20);
+ chan->in_log2_element_size = in_desc & 0x0f;
+ chan->in_log2_fifo_size = ((in_desc >> 8) & 0x1f) + 16;
+ }
+
+ /*
+ * A downstream channel should never exist above index 13,
+ * as it would request a nonexistent BULK endpoint > 15.
+ * In the peculiar case that it does, it's ignored silently.
+ */
+
+ if ((out_desc & 0x80) && i < 14) { /* Entry is valid */
+ chan->writable = 1;
+ chan->out_synchronous = !!(out_desc & 0x40);
+ chan->out_seekable = !!(out_desc & 0x20);
+ chan->out_log2_element_size = out_desc & 0x0f;
+ chan->out_log2_fifo_size =
+ ((out_desc >> 8) & 0x1f) + 16;
+ }
+ }
+
+ return 0;
+}
+
+static int xillyusb_discovery(struct usb_interface *interface)
+{
+ int rc;
+ struct xillyusb_dev *xdev = usb_get_intfdata(interface);
+ __le16 bogus_chandesc[2];
+ struct xillyfifo idt_fifo;
+ struct xillyusb_channel *chan;
+ unsigned int idt_len, names_offset;
+ unsigned char *idt;
+ int num_channels;
+
+ rc = xillyusb_send_opcode(xdev, ~0, OPCODE_QUIESCE, 0);
+
+ if (rc) {
+ dev_err(&interface->dev, "Failed to send quiesce request. Aborting.\n");
+ return rc;
+ }
+
+ /* Phase I: Set up one fake upstream channel and obtain IDT */
+
+ /* Set up a fake IDT with one async IN stream */
+ bogus_chandesc[0] = cpu_to_le16(0x80);
+ bogus_chandesc[1] = cpu_to_le16(0);
+
+ rc = setup_channels(xdev, bogus_chandesc, 1);
+
+ if (rc)
+ return rc;
+
+ rc = fifo_init(&idt_fifo, LOG2_IDT_FIFO_SIZE);
+
+ if (rc)
+ return rc;
+
+ chan = xdev->channels;
+
+ chan->in_fifo = &idt_fifo;
+ chan->read_data_ok = 1;
+
+ xdev->num_channels = 1;
+
+ rc = xillyusb_send_opcode(xdev, ~0, OPCODE_REQ_IDT, 0);
+
+ if (rc) {
+ dev_err(&interface->dev, "Failed to send IDT request. Aborting.\n");
+ goto unfifo;
+ }
+
+ rc = wait_event_interruptible_timeout(idt_fifo.waitq,
+ !chan->read_data_ok,
+ XILLY_RESPONSE_TIMEOUT);
+
+ if (xdev->error) {
+ rc = xdev->error;
+ goto unfifo;
+ }
+
+ if (rc < 0) {
+ rc = -EINTR; /* Interrupt on probe method? Interesting. */
+ goto unfifo;
+ }
+
+ if (chan->read_data_ok) {
+ rc = -ETIMEDOUT;
+ dev_err(&interface->dev, "No response from FPGA. Aborting.\n");
+ goto unfifo;
+ }
+
+ idt_len = READ_ONCE(idt_fifo.fill);
+ idt = kmalloc(idt_len, GFP_KERNEL);
+
+ if (!idt) {
+ rc = -ENOMEM;
+ goto unfifo;
+ }
+
+ fifo_read(&idt_fifo, idt, idt_len, xilly_memcpy);
+
+ if (crc32_le(~0, idt, idt_len) != 0) {
+ dev_err(&interface->dev, "IDT failed CRC check. Aborting.\n");
+ rc = -ENODEV;
+ goto unidt;
+ }
+
+ if (*idt > 0x90) {
+ dev_err(&interface->dev, "No support for IDT version 0x%02x. Maybe the xillyusb driver needs an upgrade. Aborting.\n",
+ (int)*idt);
+ rc = -ENODEV;
+ goto unidt;
+ }
+
+ /* Phase II: Set up the streams as defined in IDT */
+
+ num_channels = le16_to_cpu(*((__le16 *)(idt + 1)));
+ names_offset = 3 + num_channels * 4;
+ idt_len -= 4; /* Exclude CRC */
+
+ if (idt_len < names_offset) {
+ dev_err(&interface->dev, "IDT too short. This is exceptionally weird, because its CRC is OK\n");
+ rc = -ENODEV;
+ goto unidt;
+ }
+
+ rc = setup_channels(xdev, (void *)idt + 3, num_channels);
+
+ if (rc)
+ goto unidt;
+
+ /*
+ * Except for wildly misbehaving hardware, or if it was disconnected
+ * just after responding with the IDT, there is no reason for any
+ * work item to be running now. To be sure that xdev->channels
+ * is updated on anything that might run in parallel, flush the
+ * workqueue, which rarely does anything.
+ */
+ flush_workqueue(xdev->workq);
+
+ xdev->num_channels = num_channels;
+
+ fifo_mem_release(&idt_fifo);
+ kfree(chan);
+
+ rc = xillybus_init_chrdev(&interface->dev, &xillyusb_fops,
+ THIS_MODULE, xdev,
+ idt + names_offset,
+ idt_len - names_offset,
+ num_channels,
+ xillyname, true);
+
+ kfree(idt);
+
+ return rc;
+
+unidt:
+ kfree(idt);
+
+unfifo:
+ safely_assign_in_fifo(chan, NULL);
+ fifo_mem_release(&idt_fifo);
+
+ return rc;
+}
+
+static int xillyusb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct xillyusb_dev *xdev;
+ int rc;
+
+ xdev = kzalloc(sizeof(*xdev), GFP_KERNEL);
+ if (!xdev)
+ return -ENOMEM;
+
+ kref_init(&xdev->kref);
+ mutex_init(&xdev->process_in_mutex);
+ mutex_init(&xdev->msg_mutex);
+
+ xdev->udev = usb_get_dev(interface_to_usbdev(interface));
+ xdev->dev = &interface->dev;
+ xdev->error = 0;
+ spin_lock_init(&xdev->error_lock);
+ xdev->in_counter = 0;
+ xdev->in_bytes_left = 0;
+ xdev->workq = alloc_workqueue(xillyname, WQ_HIGHPRI, 0);
+
+ if (!xdev->workq) {
+ dev_err(&interface->dev, "Failed to allocate work queue\n");
+ rc = -ENOMEM;
+ goto fail;
+ }
+
+ INIT_WORK(&xdev->wakeup_workitem, wakeup_all);
+
+ usb_set_intfdata(interface, xdev);
+
+ rc = xillyusb_setup_base_eps(xdev);
+ if (rc)
+ goto fail;
+
+ rc = xillyusb_discovery(interface);
+ if (rc)
+ goto latefail;
+
+ return 0;
+
+latefail:
+ endpoint_quiesce(xdev->in_ep);
+ endpoint_quiesce(xdev->msg_ep);
+
+fail:
+ usb_set_intfdata(interface, NULL);
+ kref_put(&xdev->kref, cleanup_dev);
+ return rc;
+}
+
+static void xillyusb_disconnect(struct usb_interface *interface)
+{
+ struct xillyusb_dev *xdev = usb_get_intfdata(interface);
+ struct xillyusb_endpoint *msg_ep = xdev->msg_ep;
+ struct xillyfifo *fifo = &msg_ep->fifo;
+ int rc;
+ int i;
+
+ xillybus_cleanup_chrdev(xdev, &interface->dev);
+
+ /*
+ * Try to send OPCODE_QUIESCE, which will fail silently if the device
+ * was disconnected, but makes sense on module unload.
+ */
+
+ msg_ep->wake_on_drain = true;
+ xillyusb_send_opcode(xdev, ~0, OPCODE_QUIESCE, 0);
+
+ /*
+ * If the device has been disconnected, sending the opcode causes
+ * a global device error with xdev->error, if such error didn't
+ * occur earlier. Hence timing out means that the USB link is fine,
+ * but somehow the message wasn't sent. Should never happen.
+ */
+
+ rc = wait_event_interruptible_timeout(fifo->waitq,
+ msg_ep->drained || xdev->error,
+ XILLY_RESPONSE_TIMEOUT);
+
+ if (!rc)
+ dev_err(&interface->dev,
+ "Weird timeout condition on sending quiesce request.\n");
+
+ report_io_error(xdev, -ENODEV); /* Discourage further activity */
+
+ /*
+ * This device driver is declared with soft_unbind set, or else
+ * sending OPCODE_QUIESCE above would always fail. The price is
+ * that the USB framework didn't kill outstanding URBs, so it has
+ * to be done explicitly before returning from this call.
+ */
+
+ for (i = 0; i < xdev->num_channels; i++) {
+ struct xillyusb_channel *chan = &xdev->channels[i];
+
+ /*
+ * Lock taken to prevent chan->out_ep from changing. It also
+ * ensures xillyusb_open() and xillyusb_flush() don't access
+ * xdev->dev after being nullified below.
+ */
+ mutex_lock(&chan->lock);
+ if (chan->out_ep)
+ endpoint_quiesce(chan->out_ep);
+ mutex_unlock(&chan->lock);
+ }
+
+ endpoint_quiesce(xdev->in_ep);
+ endpoint_quiesce(xdev->msg_ep);
+
+ usb_set_intfdata(interface, NULL);
+
+ xdev->dev = NULL;
+
+ kref_put(&xdev->kref, cleanup_dev);
+}
+
+static struct usb_driver xillyusb_driver = {
+ .name = xillyname,
+ .id_table = xillyusb_table,
+ .probe = xillyusb_probe,
+ .disconnect = xillyusb_disconnect,
+ .soft_unbind = 1,
+};
+
+static int __init xillyusb_init(void)
+{
+ int rc = 0;
+
+ if (LOG2_INITIAL_FIFO_BUF_SIZE > PAGE_SHIFT)
+ fifo_buf_order = LOG2_INITIAL_FIFO_BUF_SIZE - PAGE_SHIFT;
+ else
+ fifo_buf_order = 0;
+
+ rc = usb_register(&xillyusb_driver);
+
+ return rc;
+}
+
+static void __exit xillyusb_exit(void)
+{
+ usb_deregister(&xillyusb_driver);
+}
+
+module_init(xillyusb_init);
+module_exit(xillyusb_exit);
diff --git a/drivers/comedi/drivers/comedi_8254.c b/drivers/comedi/drivers/comedi_8254.c
index d1d509e9add9..4bf5daa9e885 100644
--- a/drivers/comedi/drivers/comedi_8254.c
+++ b/drivers/comedi/drivers/comedi_8254.c
@@ -555,6 +555,7 @@ static int comedi_8254_insn_config(struct comedi_device *dev,
/**
* comedi_8254_subdevice_init - initialize a comedi_subdevice for the 8254 timer
* @s: comedi_subdevice struct
+ * @i8254: comedi_8254 struct
*/
void comedi_8254_subdevice_init(struct comedi_subdevice *s,
struct comedi_8254 *i8254)
@@ -607,7 +608,7 @@ static struct comedi_8254 *__i8254_init(unsigned long iobase,
/**
* comedi_8254_init - allocate and initialize the 8254 device for pio access
- * @mmio: port I/O base address
+ * @iobase: port I/O base address
* @osc_base: base time of the counter in ns
* OPTIONAL - only used by comedi_8254_cascade_ns_to_timer()
* @iosize: I/O register size
diff --git a/drivers/comedi/drivers/comedi_isadma.c b/drivers/comedi/drivers/comedi_isadma.c
index c729094298c2..479b58e209ba 100644
--- a/drivers/comedi/drivers/comedi_isadma.c
+++ b/drivers/comedi/drivers/comedi_isadma.c
@@ -143,7 +143,7 @@ EXPORT_SYMBOL_GPL(comedi_isadma_set_mode);
* comedi_isadma_alloc - allocate and initialize the ISA DMA
* @dev: comedi_device struct
* @n_desc: the number of cookies to allocate
- * @dma_chan: DMA channel for the first cookie
+ * @dma_chan1: DMA channel for the first cookie
* @dma_chan2: DMA channel for the second cookie
* @maxsize: the size of the buffer to allocate for each cookie
* @dma_dir: the DMA direction
diff --git a/drivers/comedi/drivers/ni_routes.c b/drivers/comedi/drivers/ni_routes.c
index c426a9286f15..f0f8cd424b30 100644
--- a/drivers/comedi/drivers/ni_routes.c
+++ b/drivers/comedi/drivers/ni_routes.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routes.c
* Route information for NI boards.
@@ -246,7 +245,7 @@ unsigned int ni_get_valid_routes(const struct ni_route_tables *tables,
}
EXPORT_SYMBOL_GPL(ni_get_valid_routes);
-/**
+/*
* List of NI global signal names that, as destinations, are only routeable
* indirectly through the *_arg elements of the comedi_cmd structure.
*/
@@ -388,7 +387,7 @@ ni_find_route_set(const int destination,
}
EXPORT_SYMBOL_GPL(ni_find_route_set);
-/**
+/*
* ni_route_set_has_source() - Determines whether the given source is in
* included given route_set.
*
@@ -507,7 +506,7 @@ s8 ni_route_to_register(const int src, const int dest,
}
EXPORT_SYMBOL_GPL(ni_route_to_register);
-/**
+/*
* ni_find_route_source() - Finds the signal source corresponding to a signal
* route (src-->dest) of the specified routing register
* value and the specified route destination on the
diff --git a/drivers/comedi/drivers/ni_routes.h b/drivers/comedi/drivers/ni_routes.h
index b7680fd2afe1..036982315584 100644
--- a/drivers/comedi/drivers/ni_routes.h
+++ b/drivers/comedi/drivers/ni_routes.h
@@ -1,5 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routes.h
* Route information for NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes.c b/drivers/comedi/drivers/ni_routing/ni_device_routes.c
index 7b6a74dfe48b..58654c2b12d6 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes.h b/drivers/comedi/drivers/ni_routing/ni_device_routes.h
index b9f1c47d19e1..09e4e172c659 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes.h
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes.h
@@ -1,5 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/all.h b/drivers/comedi/drivers/ni_routing/ni_device_routes/all.h
index 78b24138acb7..001dbb88a874 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/all.h
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/all.h
@@ -1,5 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/all.h
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6070e.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6070e.c
index f1126a0cb285..7d3064c92643 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6070e.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6070e.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6070e.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6220.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6220.c
index 74a59222963f..e2c462edb8ec 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6220.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6220.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6220.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6221.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6221.c
index 44dcbabf2a99..9e02ec0a66ad 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6221.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6221.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6221.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6229.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6229.c
index fa5794e4e2b3..33f7fff61f74 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6229.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6229.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6229.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6251.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6251.c
index 645fd1cd2de4..dde676b73624 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6251.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6251.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6251.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6254.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6254.c
index 056a240cd3a2..167a2da97c14 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6254.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6254.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6254.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6259.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6259.c
index e0b5fa78c3bc..ba990f98590c 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6259.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6259.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6259.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6534.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6534.c
index a2472ed288cf..f8d2a91b6c0a 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6534.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6534.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6534.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6602.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6602.c
index 91de9dac2d6a..2eee91f590eb 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6602.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6602.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6602.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6713.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6713.c
index d378b36d2084..c07ef3584a4b 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6713.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6713.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6713.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6723.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6723.c
index e0cc57ab06e7..c37373f8f0e1 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6723.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6723.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6723.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6733.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6733.c
index f6e1e17ab854..f252fbe19638 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6733.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pci-6733.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pci-6733.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6030e.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6030e.c
index 9978d632117f..4ccba4fdf3bc 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6030e.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6030e.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxi-6030e.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6224.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6224.c
index 1b89e27d7aa5..84fdfa2ef9a7 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6224.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6224.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxi-6224.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6225.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6225.c
index 10dfc34bc87c..2b99ce0f87a4 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6225.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6225.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxi-6225.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6251.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6251.c
index 25db4b7363de..1c5164c46306 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6251.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6251.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxi-6251.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6733.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6733.c
index 27da4433fc4a..a3402b1ca6e8 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6733.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxi-6733.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxi-6733.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6251.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6251.c
index 8354fe971d59..defcc4cfe1e4 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6251.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6251.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxie-6251.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6535.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6535.c
index 2ebb679e0129..d2013b9e6767 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6535.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6535.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxie-6535.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6738.c b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6738.c
index d88504314d7f..89aff39a4fc2 100644
--- a/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6738.c
+++ b/drivers/comedi/drivers/ni_routing/ni_device_routes/pxie-6738.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_device_routes/pxie-6738.c
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_route_values.c b/drivers/comedi/drivers/ni_routing/ni_route_values.c
index 5901762734ed..54a740b39819 100644
--- a/drivers/comedi/drivers/ni_routing/ni_route_values.c
+++ b/drivers/comedi/drivers/ni_routing/ni_route_values.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_route_values.c
* Route information for NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_route_values.h b/drivers/comedi/drivers/ni_routing/ni_route_values.h
index 80e0145fb82b..6e358efa6f7f 100644
--- a/drivers/comedi/drivers/ni_routing/ni_route_values.h
+++ b/drivers/comedi/drivers/ni_routing/ni_route_values.h
@@ -1,5 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_route_values.h
* Route information for NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_route_values/all.h b/drivers/comedi/drivers/ni_routing/ni_route_values/all.h
index 7227461500b5..30761e55f746 100644
--- a/drivers/comedi/drivers/ni_routing/ni_route_values/all.h
+++ b/drivers/comedi/drivers/ni_routing/ni_route_values/all.h
@@ -1,5 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_route_values/all.h
* List of valid routes for specific NI boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_route_values/ni_660x.c b/drivers/comedi/drivers/ni_routing/ni_route_values/ni_660x.c
index f1c7e6646261..aace60e49507 100644
--- a/drivers/comedi/drivers/ni_routing/ni_route_values/ni_660x.c
+++ b/drivers/comedi/drivers/ni_routing/ni_route_values/ni_660x.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_route_values/ni_660x.c
* Route information for NI_660X boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_route_values/ni_eseries.c b/drivers/comedi/drivers/ni_routing/ni_route_values/ni_eseries.c
index d1ab3c9ce585..7a52f024cdbd 100644
--- a/drivers/comedi/drivers/ni_routing/ni_route_values/ni_eseries.c
+++ b/drivers/comedi/drivers/ni_routing/ni_route_values/ni_eseries.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_route_values/ni_eseries.c
* Route information for NI_ESERIES boards.
diff --git a/drivers/comedi/drivers/ni_routing/ni_route_values/ni_mseries.c b/drivers/comedi/drivers/ni_routing/ni_route_values/ni_mseries.c
index c59d8afe0ae9..d1ddd13b33b5 100644
--- a/drivers/comedi/drivers/ni_routing/ni_route_values/ni_mseries.c
+++ b/drivers/comedi/drivers/ni_routing/ni_route_values/ni_mseries.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/ni_route_values/ni_mseries.c
* Route information for NI_MSERIES boards.
diff --git a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
index dedb6f2fc678..d55521b5bdcb 100644
--- a/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
+++ b/drivers/comedi/drivers/ni_routing/tools/convert_c_to_py.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
#include <stdint.h>
#include <stdbool.h>
diff --git a/drivers/comedi/drivers/ni_routing/tools/convert_csv_to_c.py b/drivers/comedi/drivers/ni_routing/tools/convert_csv_to_c.py
index 532eb6372a5a..90378fb50580 100755
--- a/drivers/comedi/drivers/ni_routing/tools/convert_csv_to_c.py
+++ b/drivers/comedi/drivers/ni_routing/tools/convert_csv_to_c.py
@@ -1,6 +1,5 @@
#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0+
-# vim: ts=2:sw=2:et:tw=80:nowrap
# This is simply to aide in creating the entries in the order of the value of
# the device-global NI signal/terminal constants defined in comedi.h
@@ -123,7 +122,6 @@ class DeviceRoutes(CSVCollection):
output_file_top = """\
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/{filename}
* List of valid routes for specific NI boards.
@@ -155,7 +153,6 @@ class DeviceRoutes(CSVCollection):
extern_header = """\
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/{filename}
* List of valid routes for specific NI boards.
@@ -193,7 +190,6 @@ class DeviceRoutes(CSVCollection):
single_output_file_top = """\
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/{filename}
* List of valid routes for specific NI boards.
@@ -299,7 +295,6 @@ class RouteValues(CSVCollection):
output_file_top = """\
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/{filename}
* Route information for NI boards.
@@ -337,7 +332,6 @@ class RouteValues(CSVCollection):
extern_header = """\
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/{filename}
* List of valid routes for specific NI boards.
@@ -375,7 +369,6 @@ class RouteValues(CSVCollection):
single_output_file_top = """\
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/ni_routing/{filename}
* Route information for {sheet} boards.
diff --git a/drivers/comedi/drivers/ni_routing/tools/convert_py_to_csv.py b/drivers/comedi/drivers/ni_routing/tools/convert_py_to_csv.py
index b3e6472bac22..a273b33edb8f 100755
--- a/drivers/comedi/drivers/ni_routing/tools/convert_py_to_csv.py
+++ b/drivers/comedi/drivers/ni_routing/tools/convert_py_to_csv.py
@@ -1,6 +1,5 @@
#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0+
-# vim: ts=2:sw=2:et:tw=80:nowrap
from os import path
import os, csv
diff --git a/drivers/comedi/drivers/ni_routing/tools/csv_collection.py b/drivers/comedi/drivers/ni_routing/tools/csv_collection.py
index 12617329a928..db977ecb4307 100644
--- a/drivers/comedi/drivers/ni_routing/tools/csv_collection.py
+++ b/drivers/comedi/drivers/ni_routing/tools/csv_collection.py
@@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0+
-# vim: ts=2:sw=2:et:tw=80:nowrap
import os, csv, glob
diff --git a/drivers/comedi/drivers/ni_routing/tools/make_blank_csv.py b/drivers/comedi/drivers/ni_routing/tools/make_blank_csv.py
index 89c90a0ba24d..c00eaf803299 100755
--- a/drivers/comedi/drivers/ni_routing/tools/make_blank_csv.py
+++ b/drivers/comedi/drivers/ni_routing/tools/make_blank_csv.py
@@ -1,6 +1,5 @@
#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0+
-# vim: ts=2:sw=2:et:tw=80:nowrap
from os import path
import os, csv
diff --git a/drivers/comedi/drivers/ni_routing/tools/ni_names.py b/drivers/comedi/drivers/ni_routing/tools/ni_names.py
index 5f9b825968b1..d4df5f29e3e5 100644
--- a/drivers/comedi/drivers/ni_routing/tools/ni_names.py
+++ b/drivers/comedi/drivers/ni_routing/tools/ni_names.py
@@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0+
-# vim: ts=2:sw=2:et:tw=80:nowrap
"""
This file helps to extract string names of NI signals as included in comedi.h
between NI_NAMES_BASE and NI_NAMES_BASE+NI_NUM_NAMES.
diff --git a/drivers/comedi/drivers/ni_tio.c b/drivers/comedi/drivers/ni_tio.c
index f6154addaa95..da6826d77e60 100644
--- a/drivers/comedi/drivers/ni_tio.c
+++ b/drivers/comedi/drivers/ni_tio.c
@@ -1501,7 +1501,7 @@ int ni_tio_insn_config(struct comedi_device *dev,
}
EXPORT_SYMBOL_GPL(ni_tio_insn_config);
-/**
+/*
* Retrieves the register value of the current source of the output selector for
* the given destination.
*
@@ -1541,10 +1541,10 @@ int ni_tio_get_routing(struct ni_gpct_device *counter_dev, unsigned int dest)
EXPORT_SYMBOL_GPL(ni_tio_get_routing);
/**
- * Sets the register value of the selector MUX for the given destination.
- * @counter_dev:Pointer to general counter device.
- * @destination:Device-global identifier of route destination.
- * @register_value:
+ * ni_tio_set_routing() - Sets the register value of the selector MUX for the given destination.
+ * @counter_dev: Pointer to general counter device.
+ * @dest: Device-global identifier of route destination.
+ * @reg:
* The first several bits of this value should store the desired
* value to write to the register. All other bits are for
* transmitting information that modify the mode of the particular
@@ -1580,7 +1580,7 @@ int ni_tio_set_routing(struct ni_gpct_device *counter_dev, unsigned int dest,
}
EXPORT_SYMBOL_GPL(ni_tio_set_routing);
-/**
+/*
* Sets the given destination MUX to its default value or disable it.
*
* Return: 0 if successful; -EINVAL if terminal is unknown.
diff --git a/drivers/comedi/drivers/tests/comedi_example_test.c b/drivers/comedi/drivers/tests/comedi_example_test.c
index e5aaaeab7bdd..81d074bcdea5 100644
--- a/drivers/comedi/drivers/tests/comedi_example_test.c
+++ b/drivers/comedi/drivers/tests/comedi_example_test.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/tests/comedi_example_test.c
* Example set of unit tests.
diff --git a/drivers/comedi/drivers/tests/ni_routes_test.c b/drivers/comedi/drivers/tests/ni_routes_test.c
index 32073850d545..652362486ff6 100644
--- a/drivers/comedi/drivers/tests/ni_routes_test.c
+++ b/drivers/comedi/drivers/tests/ni_routes_test.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0+
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/tests/ni_routes_test.c
* Unit tests for NI routes (ni_routes.c module).
diff --git a/drivers/comedi/drivers/tests/unittest.h b/drivers/comedi/drivers/tests/unittest.h
index 2da3beea2479..b0b34e058aad 100644
--- a/drivers/comedi/drivers/tests/unittest.h
+++ b/drivers/comedi/drivers/tests/unittest.h
@@ -1,5 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0+ */
-/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
/*
* comedi/drivers/tests/unittest.h
* Simple framework for unittests for comedi drivers.
diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c
index d9a16ba2ccc2..65bffde137e3 100644
--- a/drivers/eisa/eisa-bus.c
+++ b/drivers/eisa/eisa-bus.c
@@ -155,34 +155,29 @@ void eisa_driver_unregister(struct eisa_driver *edrv)
}
EXPORT_SYMBOL(eisa_driver_unregister);
-static ssize_t eisa_show_sig(struct device *dev, struct device_attribute *attr,
- char *buf)
+static ssize_t signature_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct eisa_device *edev = to_eisa_device(dev);
return sprintf(buf, "%s\n", edev->id.sig);
}
+static DEVICE_ATTR_RO(signature);
-static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL);
-
-static ssize_t eisa_show_state(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static ssize_t enabled_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct eisa_device *edev = to_eisa_device(dev);
return sprintf(buf, "%d\n", edev->state & EISA_CONFIG_ENABLED);
}
+static DEVICE_ATTR_RO(enabled);
-static DEVICE_ATTR(enabled, S_IRUGO, eisa_show_state, NULL);
-
-static ssize_t eisa_show_modalias(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static ssize_t modalias_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct eisa_device *edev = to_eisa_device(dev);
return sprintf(buf, EISA_DEVICE_MODALIAS_FMT "\n", edev->id.sig);
}
-
-static DEVICE_ATTR(modalias, S_IRUGO, eisa_show_modalias, NULL);
+static DEVICE_ATTR_RO(modalias);
static int __init eisa_init_device(struct eisa_root_device *root,
struct eisa_device *edev,
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index e3db936becfd..c69d40ae5619 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -154,7 +154,7 @@ config EXTCON_RT8973A
from abnormal high input voltage (up to 28V).
config EXTCON_SM5502
- tristate "Silicon Mitus SM5502 EXTCON support"
+ tristate "Silicon Mitus SM5502/SM5504 EXTCON support"
depends on I2C
select IRQ_DOMAIN
select REGMAP_I2C
diff --git a/drivers/extcon/extcon-intel-mrfld.c b/drivers/extcon/extcon-intel-mrfld.c
index f47016fb28a8..cd1a5f230077 100644
--- a/drivers/extcon/extcon-intel-mrfld.c
+++ b/drivers/extcon/extcon-intel-mrfld.c
@@ -197,6 +197,7 @@ static int mrfld_extcon_probe(struct platform_device *pdev)
struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
struct regmap *regmap = pmic->regmap;
struct mrfld_extcon_data *data;
+ unsigned int status;
unsigned int id;
int irq, ret;
@@ -244,6 +245,14 @@ static int mrfld_extcon_probe(struct platform_device *pdev)
/* Get initial state */
mrfld_extcon_role_detect(data);
+ /*
+ * Cached status value is used for cable detection, see comments
+ * in mrfld_extcon_cable_detect(), we need to sync cached value
+ * with a real state of the hardware.
+ */
+ regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+ data->status = status;
+
mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index bbc592823570..9cddf08e0696 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -773,3 +773,4 @@ module_platform_driver(max8997_muic_driver);
MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8997-muic");
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index db41d1c58efd..93da2d8379b1 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -40,17 +40,13 @@ struct sm5502_muic_info {
struct i2c_client *i2c;
struct regmap *regmap;
+ const struct sm5502_type *type;
struct regmap_irq_chip_data *irq_data;
- struct muic_irq *muic_irqs;
- unsigned int num_muic_irqs;
int irq;
bool irq_attach;
bool irq_detach;
struct work_struct irq_work;
- struct reg_data *reg_data;
- unsigned int num_reg_data;
-
struct mutex mutex;
/*
@@ -62,6 +58,18 @@ struct sm5502_muic_info {
struct delayed_work wq_detcable;
};
+struct sm5502_type {
+ struct muic_irq *muic_irqs;
+ unsigned int num_muic_irqs;
+ const struct regmap_irq_chip *irq_chip;
+
+ struct reg_data *reg_data;
+ unsigned int num_reg_data;
+
+ unsigned int otg_dev_type1;
+ int (*parse_irq)(struct sm5502_muic_info *info, int irq_type);
+};
+
/* Default value of SM5502 register to bring up MUIC device. */
static struct reg_data sm5502_reg_data[] = {
{
@@ -88,7 +96,33 @@ static struct reg_data sm5502_reg_data[] = {
| SM5502_REG_INTM2_MHL_MASK,
.invert = true,
},
- { }
+};
+
+/* Default value of SM5504 register to bring up MUIC device. */
+static struct reg_data sm5504_reg_data[] = {
+ {
+ .reg = SM5502_REG_RESET,
+ .val = SM5502_REG_RESET_MASK,
+ .invert = true,
+ }, {
+ .reg = SM5502_REG_INTMASK1,
+ .val = SM5504_REG_INTM1_ATTACH_MASK
+ | SM5504_REG_INTM1_DETACH_MASK,
+ .invert = false,
+ }, {
+ .reg = SM5502_REG_INTMASK2,
+ .val = SM5504_REG_INTM2_RID_CHG_MASK
+ | SM5504_REG_INTM2_UVLO_MASK
+ | SM5504_REG_INTM2_POR_MASK,
+ .invert = true,
+ }, {
+ .reg = SM5502_REG_CONTROL,
+ .val = SM5502_REG_CONTROL_MANUAL_SW_MASK
+ | SM5504_REG_CONTROL_CHGTYP_MASK
+ | SM5504_REG_CONTROL_USBCHDEN_MASK
+ | SM5504_REG_CONTROL_ADC_EN_MASK,
+ .invert = true,
+ },
};
/* List of detectable cables */
@@ -199,6 +233,55 @@ static const struct regmap_irq_chip sm5502_muic_irq_chip = {
.num_irqs = ARRAY_SIZE(sm5502_irqs),
};
+/* List of supported interrupt for SM5504 */
+static struct muic_irq sm5504_muic_irqs[] = {
+ { SM5504_IRQ_INT1_ATTACH, "muic-attach" },
+ { SM5504_IRQ_INT1_DETACH, "muic-detach" },
+ { SM5504_IRQ_INT1_CHG_DET, "muic-chg-det" },
+ { SM5504_IRQ_INT1_DCD_OUT, "muic-dcd-out" },
+ { SM5504_IRQ_INT1_OVP_EVENT, "muic-ovp-event" },
+ { SM5504_IRQ_INT1_CONNECT, "muic-connect" },
+ { SM5504_IRQ_INT1_ADC_CHG, "muic-adc-chg" },
+ { SM5504_IRQ_INT2_RID_CHG, "muic-rid-chg" },
+ { SM5504_IRQ_INT2_UVLO, "muic-uvlo" },
+ { SM5504_IRQ_INT2_POR, "muic-por" },
+ { SM5504_IRQ_INT2_OVP_FET, "muic-ovp-fet" },
+ { SM5504_IRQ_INT2_OCP_LATCH, "muic-ocp-latch" },
+ { SM5504_IRQ_INT2_OCP_EVENT, "muic-ocp-event" },
+ { SM5504_IRQ_INT2_OVP_OCP_EVENT, "muic-ovp-ocp-event" },
+};
+
+/* Define interrupt list of SM5504 to register regmap_irq */
+static const struct regmap_irq sm5504_irqs[] = {
+ /* INT1 interrupts */
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ATTACH_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DETACH_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CHG_DET_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DCD_OUT_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_OVP_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CONNECT_MASK, },
+ { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ADC_CHG_MASK, },
+
+ /* INT2 interrupts */
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_RID_CHG_MASK,},
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_UVLO_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_POR_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_FET_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_LATCH_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_EVENT_MASK, },
+ { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK, },
+};
+
+static const struct regmap_irq_chip sm5504_muic_irq_chip = {
+ .name = "sm5504",
+ .status_base = SM5502_REG_INT1,
+ .mask_base = SM5502_REG_INTMASK1,
+ .mask_invert = false,
+ .num_regs = 2,
+ .irqs = sm5504_irqs,
+ .num_irqs = ARRAY_SIZE(sm5504_irqs),
+};
+
/* Define regmap configuration of SM5502 for I2C communication */
static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
{
@@ -302,11 +385,9 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
return ret;
}
- switch (dev_type1) {
- case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
+ if (dev_type1 == info->type->otg_dev_type1) {
cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
- break;
- default:
+ } else {
dev_dbg(info->dev,
"cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
adc, dev_type1);
@@ -359,6 +440,11 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
return ret;
}
+ if (dev_type1 == info->type->otg_dev_type1) {
+ cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
+ break;
+ }
+
switch (dev_type1) {
case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
cable_type = SM5502_MUIC_ADC_OPEN_USB;
@@ -366,9 +452,6 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
cable_type = SM5502_MUIC_ADC_OPEN_TA;
break;
- case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
- cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
- break;
default:
dev_dbg(info->dev,
"cannot identify the cable type: adc(0x%x)\n",
@@ -498,16 +581,44 @@ static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
return 0;
}
+static int sm5504_parse_irq(struct sm5502_muic_info *info, int irq_type)
+{
+ switch (irq_type) {
+ case SM5504_IRQ_INT1_ATTACH:
+ info->irq_attach = true;
+ break;
+ case SM5504_IRQ_INT1_DETACH:
+ info->irq_detach = true;
+ break;
+ case SM5504_IRQ_INT1_CHG_DET:
+ case SM5504_IRQ_INT1_DCD_OUT:
+ case SM5504_IRQ_INT1_OVP_EVENT:
+ case SM5504_IRQ_INT1_CONNECT:
+ case SM5504_IRQ_INT1_ADC_CHG:
+ case SM5504_IRQ_INT2_RID_CHG:
+ case SM5504_IRQ_INT2_UVLO:
+ case SM5504_IRQ_INT2_POR:
+ case SM5504_IRQ_INT2_OVP_FET:
+ case SM5504_IRQ_INT2_OCP_LATCH:
+ case SM5504_IRQ_INT2_OCP_EVENT:
+ case SM5504_IRQ_INT2_OVP_OCP_EVENT:
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
{
struct sm5502_muic_info *info = data;
int i, irq_type = -1, ret;
- for (i = 0; i < info->num_muic_irqs; i++)
- if (irq == info->muic_irqs[i].virq)
- irq_type = info->muic_irqs[i].irq;
+ for (i = 0; i < info->type->num_muic_irqs; i++)
+ if (irq == info->type->muic_irqs[i].virq)
+ irq_type = info->type->muic_irqs[i].irq;
- ret = sm5502_parse_irq(info, irq_type);
+ ret = info->type->parse_irq(info, irq_type);
if (ret < 0) {
dev_warn(info->dev, "cannot handle is interrupt:%d\n",
irq_type);
@@ -552,19 +663,18 @@ static void sm5502_init_dev_type(struct sm5502_muic_info *info)
version_id, vendor_id);
/* Initiazle the register of SM5502 device to bring-up */
- for (i = 0; i < info->num_reg_data; i++) {
+ for (i = 0; i < info->type->num_reg_data; i++) {
unsigned int val = 0;
- if (!info->reg_data[i].invert)
- val |= ~info->reg_data[i].val;
+ if (!info->type->reg_data[i].invert)
+ val |= ~info->type->reg_data[i].val;
else
- val = info->reg_data[i].val;
- regmap_write(info->regmap, info->reg_data[i].reg, val);
+ val = info->type->reg_data[i].val;
+ regmap_write(info->regmap, info->type->reg_data[i].reg, val);
}
}
-static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
{
struct device_node *np = i2c->dev.of_node;
struct sm5502_muic_info *info;
@@ -581,10 +691,13 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
info->dev = &i2c->dev;
info->i2c = i2c;
info->irq = i2c->irq;
- info->muic_irqs = sm5502_muic_irqs;
- info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
- info->reg_data = sm5502_reg_data;
- info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
+ info->type = device_get_match_data(info->dev);
+ if (!info->type)
+ return -EINVAL;
+ if (!info->type->parse_irq) {
+ dev_err(info->dev, "parse_irq missing in struct sm5502_type\n");
+ return -EINVAL;
+ }
mutex_init(&info->mutex);
@@ -600,16 +713,17 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
/* Support irq domain for SM5502 MUIC device */
irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
- ret = regmap_add_irq_chip(info->regmap, info->irq, irq_flags, 0,
- &sm5502_muic_irq_chip, &info->irq_data);
+ ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq,
+ irq_flags, 0, info->type->irq_chip,
+ &info->irq_data);
if (ret != 0) {
dev_err(info->dev, "failed to request IRQ %d: %d\n",
info->irq, ret);
return ret;
}
- for (i = 0; i < info->num_muic_irqs; i++) {
- struct muic_irq *muic_irq = &info->muic_irqs[i];
+ for (i = 0; i < info->type->num_muic_irqs; i++) {
+ struct muic_irq *muic_irq = &info->type->muic_irqs[i];
int virq = 0;
virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
@@ -661,17 +775,29 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
return 0;
}
-static int sm5502_muic_i2c_remove(struct i2c_client *i2c)
-{
- struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
-
- regmap_del_irq_chip(info->irq, info->irq_data);
+static const struct sm5502_type sm5502_data = {
+ .muic_irqs = sm5502_muic_irqs,
+ .num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs),
+ .irq_chip = &sm5502_muic_irq_chip,
+ .reg_data = sm5502_reg_data,
+ .num_reg_data = ARRAY_SIZE(sm5502_reg_data),
+ .otg_dev_type1 = SM5502_REG_DEV_TYPE1_USB_OTG_MASK,
+ .parse_irq = sm5502_parse_irq,
+};
- return 0;
-}
+static const struct sm5502_type sm5504_data = {
+ .muic_irqs = sm5504_muic_irqs,
+ .num_muic_irqs = ARRAY_SIZE(sm5504_muic_irqs),
+ .irq_chip = &sm5504_muic_irq_chip,
+ .reg_data = sm5504_reg_data,
+ .num_reg_data = ARRAY_SIZE(sm5504_reg_data),
+ .otg_dev_type1 = SM5504_REG_DEV_TYPE1_USB_OTG_MASK,
+ .parse_irq = sm5504_parse_irq,
+};
static const struct of_device_id sm5502_dt_match[] = {
- { .compatible = "siliconmitus,sm5502-muic" },
+ { .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data },
+ { .compatible = "siliconmitus,sm5504-muic", .data = &sm5504_data },
{ },
};
MODULE_DEVICE_TABLE(of, sm5502_dt_match);
@@ -702,7 +828,8 @@ static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
sm5502_muic_suspend, sm5502_muic_resume);
static const struct i2c_device_id sm5502_i2c_id[] = {
- { "sm5502", TYPE_SM5502 },
+ { "sm5502", (kernel_ulong_t)&sm5502_data },
+ { "sm5504", (kernel_ulong_t)&sm5504_data },
{ }
};
MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
@@ -713,8 +840,7 @@ static struct i2c_driver sm5502_muic_i2c_driver = {
.pm = &sm5502_muic_pm_ops,
.of_match_table = sm5502_dt_match,
},
- .probe = sm5022_muic_i2c_probe,
- .remove = sm5502_muic_i2c_remove,
+ .probe_new = sm5022_muic_i2c_probe,
.id_table = sm5502_i2c_id,
};
diff --git a/drivers/extcon/extcon-sm5502.h b/drivers/extcon/extcon-sm5502.h
index ce1f1ec310c4..9c04315d48e2 100644
--- a/drivers/extcon/extcon-sm5502.h
+++ b/drivers/extcon/extcon-sm5502.h
@@ -8,10 +8,6 @@
#ifndef __LINUX_EXTCON_SM5502_H
#define __LINUX_EXTCON_SM5502_H
-enum sm5502_types {
- TYPE_SM5502,
-};
-
/* SM5502 registers */
enum sm5502_reg {
SM5502_REG_DEVICE_ID = 0x01,
@@ -93,6 +89,13 @@ enum sm5502_reg {
#define SM5502_REG_CONTROL_RAW_DATA_MASK (0x1 << SM5502_REG_CONTROL_RAW_DATA_SHIFT)
#define SM5502_REG_CONTROL_SW_OPEN_MASK (0x1 << SM5502_REG_CONTROL_SW_OPEN_SHIFT)
+#define SM5504_REG_CONTROL_CHGTYP_SHIFT 5
+#define SM5504_REG_CONTROL_USBCHDEN_SHIFT 6
+#define SM5504_REG_CONTROL_ADC_EN_SHIFT 7
+#define SM5504_REG_CONTROL_CHGTYP_MASK (0x1 << SM5504_REG_CONTROL_CHGTYP_SHIFT)
+#define SM5504_REG_CONTROL_USBCHDEN_MASK (0x1 << SM5504_REG_CONTROL_USBCHDEN_SHIFT)
+#define SM5504_REG_CONTROL_ADC_EN_MASK (0x1 << SM5504_REG_CONTROL_ADC_EN_SHIFT)
+
#define SM5502_REG_INTM1_ATTACH_SHIFT 0
#define SM5502_REG_INTM1_DETACH_SHIFT 1
#define SM5502_REG_INTM1_KP_SHIFT 2
@@ -123,6 +126,36 @@ enum sm5502_reg {
#define SM5502_REG_INTM2_STUCK_KEY_RCV_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT)
#define SM5502_REG_INTM2_MHL_MASK (0x1 << SM5502_REG_INTM2_MHL_SHIFT)
+#define SM5504_REG_INTM1_ATTACH_SHIFT 0
+#define SM5504_REG_INTM1_DETACH_SHIFT 1
+#define SM5504_REG_INTM1_CHG_DET_SHIFT 2
+#define SM5504_REG_INTM1_DCD_OUT_SHIFT 3
+#define SM5504_REG_INTM1_OVP_EVENT_SHIFT 4
+#define SM5504_REG_INTM1_CONNECT_SHIFT 5
+#define SM5504_REG_INTM1_ADC_CHG_SHIFT 6
+#define SM5504_REG_INTM1_ATTACH_MASK (0x1 << SM5504_REG_INTM1_ATTACH_SHIFT)
+#define SM5504_REG_INTM1_DETACH_MASK (0x1 << SM5504_REG_INTM1_DETACH_SHIFT)
+#define SM5504_REG_INTM1_CHG_DET_MASK (0x1 << SM5504_REG_INTM1_CHG_DET_SHIFT)
+#define SM5504_REG_INTM1_DCD_OUT_MASK (0x1 << SM5504_REG_INTM1_DCD_OUT_SHIFT)
+#define SM5504_REG_INTM1_OVP_EVENT_MASK (0x1 << SM5504_REG_INTM1_OVP_EVENT_SHIFT)
+#define SM5504_REG_INTM1_CONNECT_MASK (0x1 << SM5504_REG_INTM1_CONNECT_SHIFT)
+#define SM5504_REG_INTM1_ADC_CHG_MASK (0x1 << SM5504_REG_INTM1_ADC_CHG_SHIFT)
+
+#define SM5504_REG_INTM2_RID_CHG_SHIFT 0
+#define SM5504_REG_INTM2_UVLO_SHIFT 1
+#define SM5504_REG_INTM2_POR_SHIFT 2
+#define SM5504_REG_INTM2_OVP_FET_SHIFT 4
+#define SM5504_REG_INTM2_OCP_LATCH_SHIFT 5
+#define SM5504_REG_INTM2_OCP_EVENT_SHIFT 6
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT 7
+#define SM5504_REG_INTM2_RID_CHG_MASK (0x1 << SM5504_REG_INTM2_RID_CHG_SHIFT)
+#define SM5504_REG_INTM2_UVLO_MASK (0x1 << SM5504_REG_INTM2_UVLO_SHIFT)
+#define SM5504_REG_INTM2_POR_MASK (0x1 << SM5504_REG_INTM2_POR_SHIFT)
+#define SM5504_REG_INTM2_OVP_FET_MASK (0x1 << SM5504_REG_INTM2_OVP_FET_SHIFT)
+#define SM5504_REG_INTM2_OCP_LATCH_MASK (0x1 << SM5504_REG_INTM2_OCP_LATCH_SHIFT)
+#define SM5504_REG_INTM2_OCP_EVENT_MASK (0x1 << SM5504_REG_INTM2_OCP_EVENT_SHIFT)
+#define SM5504_REG_INTM2_OVP_OCP_EVENT_MASK (0x1 << SM5504_REG_INTM2_OVP_OCP_EVENT_SHIFT)
+
#define SM5502_REG_ADC_SHIFT 0
#define SM5502_REG_ADC_MASK (0x1f << SM5502_REG_ADC_SHIFT)
@@ -199,6 +232,9 @@ enum sm5502_reg {
#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT)
#define SM5502_REG_DEV_TYPE1_USB_OTG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT)
+#define SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT 0
+#define SM5504_REG_DEV_TYPE1_USB_OTG_MASK (0x1 << SM5504_REG_DEV_TYPE1_USB_OTG_SHIFT)
+
#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT 0
#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT 1
#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT 2
@@ -277,4 +313,42 @@ enum sm5502_irq {
#define SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK BIT(4)
#define SM5502_IRQ_INT2_MHL_MASK BIT(5)
+/* SM5504 Interrupts */
+enum sm5504_irq {
+ /* INT1 */
+ SM5504_IRQ_INT1_ATTACH,
+ SM5504_IRQ_INT1_DETACH,
+ SM5504_IRQ_INT1_CHG_DET,
+ SM5504_IRQ_INT1_DCD_OUT,
+ SM5504_IRQ_INT1_OVP_EVENT,
+ SM5504_IRQ_INT1_CONNECT,
+ SM5504_IRQ_INT1_ADC_CHG,
+
+ /* INT2 */
+ SM5504_IRQ_INT2_RID_CHG,
+ SM5504_IRQ_INT2_UVLO,
+ SM5504_IRQ_INT2_POR,
+ SM5504_IRQ_INT2_OVP_FET,
+ SM5504_IRQ_INT2_OCP_LATCH,
+ SM5504_IRQ_INT2_OCP_EVENT,
+ SM5504_IRQ_INT2_OVP_OCP_EVENT,
+
+ SM5504_IRQ_NUM,
+};
+
+#define SM5504_IRQ_INT1_ATTACH_MASK BIT(0)
+#define SM5504_IRQ_INT1_DETACH_MASK BIT(1)
+#define SM5504_IRQ_INT1_CHG_DET_MASK BIT(2)
+#define SM5504_IRQ_INT1_DCD_OUT_MASK BIT(3)
+#define SM5504_IRQ_INT1_OVP_MASK BIT(4)
+#define SM5504_IRQ_INT1_CONNECT_MASK BIT(5)
+#define SM5504_IRQ_INT1_ADC_CHG_MASK BIT(6)
+#define SM5504_IRQ_INT2_RID_CHG_MASK BIT(0)
+#define SM5504_IRQ_INT2_UVLO_MASK BIT(1)
+#define SM5504_IRQ_INT2_POR_MASK BIT(2)
+#define SM5504_IRQ_INT2_OVP_FET_MASK BIT(4)
+#define SM5504_IRQ_INT2_OCP_LATCH_MASK BIT(5)
+#define SM5504_IRQ_INT2_OCP_EVENT_MASK BIT(6)
+#define SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK BIT(7)
+
#endif /* __LINUX_EXTCON_SM5502_H */
diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
index 88ed971e32c0..b0d671db178a 100644
--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -511,12 +511,12 @@ remove_card(struct pci_dev *dev)
wake_up_interruptible(&client->buffer.wait);
spin_unlock_irq(&lynx->client_list_lock);
- pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
- lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
- pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
- lynx->rcv_pcl, lynx->rcv_pcl_bus);
- pci_free_consistent(lynx->pci_device, PAGE_SIZE,
- lynx->rcv_buffer, lynx->rcv_buffer_bus);
+ dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+ lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
+ dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+ lynx->rcv_pcl, lynx->rcv_pcl_bus);
+ dma_free_coherent(&lynx->pci_device->dev, PAGE_SIZE, lynx->rcv_buffer,
+ lynx->rcv_buffer_bus);
iounmap(lynx->registers);
pci_disable_device(dev);
@@ -532,7 +532,7 @@ add_card(struct pci_dev *dev, const struct pci_device_id *unused)
u32 p, end;
int ret, i;
- if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
+ if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
dev_err(&dev->dev,
"DMA address limits not supported for PCILynx hardware\n");
return -ENXIO;
@@ -564,12 +564,16 @@ add_card(struct pci_dev *dev, const struct pci_device_id *unused)
goto fail_deallocate_lynx;
}
- lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device,
- sizeof(struct pcl), &lynx->rcv_start_pcl_bus);
- lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device,
- sizeof(struct pcl), &lynx->rcv_pcl_bus);
- lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device,
- RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus);
+ lynx->rcv_start_pcl = dma_alloc_coherent(&lynx->pci_device->dev,
+ sizeof(struct pcl),
+ &lynx->rcv_start_pcl_bus,
+ GFP_KERNEL);
+ lynx->rcv_pcl = dma_alloc_coherent(&lynx->pci_device->dev,
+ sizeof(struct pcl),
+ &lynx->rcv_pcl_bus, GFP_KERNEL);
+ lynx->rcv_buffer = dma_alloc_coherent(&lynx->pci_device->dev,
+ RCV_BUFFER_SIZE,
+ &lynx->rcv_buffer_bus, GFP_KERNEL);
if (lynx->rcv_start_pcl == NULL ||
lynx->rcv_pcl == NULL ||
lynx->rcv_buffer == NULL) {
@@ -667,14 +671,15 @@ fail_free_irq:
fail_deallocate_buffers:
if (lynx->rcv_start_pcl)
- pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
- lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
+ dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+ lynx->rcv_start_pcl,
+ lynx->rcv_start_pcl_bus);
if (lynx->rcv_pcl)
- pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
- lynx->rcv_pcl, lynx->rcv_pcl_bus);
+ dma_free_coherent(&lynx->pci_device->dev, sizeof(struct pcl),
+ lynx->rcv_pcl, lynx->rcv_pcl_bus);
if (lynx->rcv_buffer)
- pci_free_consistent(lynx->pci_device, PAGE_SIZE,
- lynx->rcv_buffer, lynx->rcv_buffer_bus);
+ dma_free_coherent(&lynx->pci_device->dev, PAGE_SIZE,
+ lynx->rcv_buffer, lynx->rcv_buffer_bus);
iounmap(lynx->registers);
fail_deallocate_lynx:
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 3aa489dba30a..2a7687911c09 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -1034,24 +1034,32 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
/* add svc client device(s) */
svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL);
- if (!svc)
- return -ENOMEM;
+ if (!svc) {
+ ret = -ENOMEM;
+ goto err_free_kfifo;
+ }
svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0);
if (!svc->stratix10_svc_rsu) {
dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_free_kfifo;
}
ret = platform_device_add(svc->stratix10_svc_rsu);
- if (ret) {
- platform_device_put(svc->stratix10_svc_rsu);
- return ret;
- }
+ if (ret)
+ goto err_put_device;
+
dev_set_drvdata(dev, svc);
pr_info("Intel Service Layer Driver Initialized\n");
+ return 0;
+
+err_put_device:
+ platform_device_put(svc->stratix10_svc_rsu);
+err_free_kfifo:
+ kfifo_free(&controller->svc_fifo);
return ret;
}
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 33e15058d0dc..8cd454ee20c0 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -7,7 +7,7 @@ menuconfig FPGA
tristate "FPGA Configuration Framework"
help
Say Y here if you want support for configuring FPGAs from the
- kernel. The FPGA framework adds a FPGA manager class and FPGA
+ kernel. The FPGA framework adds an FPGA manager class and FPGA
manager drivers.
if FPGA
@@ -134,7 +134,7 @@ config FPGA_REGION
tristate "FPGA Region"
depends on FPGA_BRIDGE
help
- FPGA Region common code. A FPGA Region controls a FPGA Manager
+ FPGA Region common code. An FPGA Region controls an FPGA Manager
and the FPGA Bridges associated with either a reconfigurable
region of an FPGA or a whole FPGA.
diff --git a/drivers/fpga/altera-pr-ip-core.c b/drivers/fpga/altera-pr-ip-core.c
index 5b130c4d9882..dfdf21ed34c4 100644
--- a/drivers/fpga/altera-pr-ip-core.c
+++ b/drivers/fpga/altera-pr-ip-core.c
@@ -199,16 +199,6 @@ int alt_pr_register(struct device *dev, void __iomem *reg_base)
}
EXPORT_SYMBOL_GPL(alt_pr_register);
-void alt_pr_unregister(struct device *dev)
-{
- struct fpga_manager *mgr = dev_get_drvdata(dev);
-
- dev_dbg(dev, "%s\n", __func__);
-
- fpga_mgr_unregister(mgr);
-}
-EXPORT_SYMBOL_GPL(alt_pr_unregister);
-
MODULE_AUTHOR("Matthew Gerlach <matthew.gerlach@linux.intel.com>");
MODULE_DESCRIPTION("Altera Partial Reconfiguration IP Core");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
index e9266b2a357f..2bfb2ff86930 100644
--- a/drivers/fpga/fpga-bridge.c
+++ b/drivers/fpga/fpga-bridge.c
@@ -85,14 +85,14 @@ err_dev:
}
/**
- * of_fpga_bridge_get - get an exclusive reference to a fpga bridge
+ * of_fpga_bridge_get - get an exclusive reference to an fpga bridge
*
- * @np: node pointer of a FPGA bridge
+ * @np: node pointer of an FPGA bridge
* @info: fpga image specific information
*
* Return fpga_bridge struct if successful.
* Return -EBUSY if someone already has a reference to the bridge.
- * Return -ENODEV if @np is not a FPGA Bridge.
+ * Return -ENODEV if @np is not an FPGA Bridge.
*/
struct fpga_bridge *of_fpga_bridge_get(struct device_node *np,
struct fpga_image_info *info)
@@ -113,11 +113,11 @@ static int fpga_bridge_dev_match(struct device *dev, const void *data)
}
/**
- * fpga_bridge_get - get an exclusive reference to a fpga bridge
+ * fpga_bridge_get - get an exclusive reference to an fpga bridge
* @dev: parent device that fpga bridge was registered with
* @info: fpga manager info
*
- * Given a device, get an exclusive reference to a fpga bridge.
+ * Given a device, get an exclusive reference to an fpga bridge.
*
* Return: fpga bridge struct or IS_ERR() condition containing error code.
*/
@@ -224,7 +224,7 @@ EXPORT_SYMBOL_GPL(fpga_bridges_put);
/**
* of_fpga_bridge_get_to_list - get a bridge, add it to a list
*
- * @np: node pointer of a FPGA bridge
+ * @np: node pointer of an FPGA bridge
* @info: fpga image specific information
* @bridge_list: list of FPGA bridges
*
@@ -313,7 +313,7 @@ ATTRIBUTE_GROUPS(fpga_bridge);
/**
* fpga_bridge_create - create and initialize a struct fpga_bridge
- * @dev: FPGA bridge device from pdev
+ * @parent: FPGA bridge device from pdev
* @name: FPGA bridge name
* @br_ops: pointer to structure of fpga bridge ops
* @priv: FPGA bridge private data
@@ -323,7 +323,7 @@ ATTRIBUTE_GROUPS(fpga_bridge);
*
* Return: struct fpga_bridge or NULL
*/
-struct fpga_bridge *fpga_bridge_create(struct device *dev, const char *name,
+struct fpga_bridge *fpga_bridge_create(struct device *parent, const char *name,
const struct fpga_bridge_ops *br_ops,
void *priv)
{
@@ -331,7 +331,7 @@ struct fpga_bridge *fpga_bridge_create(struct device *dev, const char *name,
int id, ret;
if (!name || !strlen(name)) {
- dev_err(dev, "Attempt to register with no name!\n");
+ dev_err(parent, "Attempt to register with no name!\n");
return NULL;
}
@@ -353,8 +353,8 @@ struct fpga_bridge *fpga_bridge_create(struct device *dev, const char *name,
device_initialize(&bridge->dev);
bridge->dev.groups = br_ops->groups;
bridge->dev.class = fpga_bridge_class;
- bridge->dev.parent = dev;
- bridge->dev.of_node = dev->of_node;
+ bridge->dev.parent = parent;
+ bridge->dev.of_node = parent->of_node;
bridge->dev.id = id;
ret = dev_set_name(&bridge->dev, "br%d", id);
@@ -373,7 +373,7 @@ error_kfree:
EXPORT_SYMBOL_GPL(fpga_bridge_create);
/**
- * fpga_bridge_free - free a fpga bridge created by fpga_bridge_create()
+ * fpga_bridge_free - free an fpga bridge created by fpga_bridge_create()
* @bridge: FPGA bridge struct
*/
void fpga_bridge_free(struct fpga_bridge *bridge)
@@ -392,12 +392,12 @@ static void devm_fpga_bridge_release(struct device *dev, void *res)
/**
* devm_fpga_bridge_create - create and init a managed struct fpga_bridge
- * @dev: FPGA bridge device from pdev
+ * @parent: FPGA bridge device from pdev
* @name: FPGA bridge name
* @br_ops: pointer to structure of fpga bridge ops
* @priv: FPGA bridge private data
*
- * This function is intended for use in a FPGA bridge driver's probe function.
+ * This function is intended for use in an FPGA bridge driver's probe function.
* After the bridge driver creates the struct with devm_fpga_bridge_create(), it
* should register the bridge with fpga_bridge_register(). The bridge driver's
* remove function should call fpga_bridge_unregister(). The bridge struct
@@ -408,7 +408,7 @@ static void devm_fpga_bridge_release(struct device *dev, void *res)
* Return: struct fpga_bridge or NULL
*/
struct fpga_bridge
-*devm_fpga_bridge_create(struct device *dev, const char *name,
+*devm_fpga_bridge_create(struct device *parent, const char *name,
const struct fpga_bridge_ops *br_ops, void *priv)
{
struct fpga_bridge **ptr, *bridge;
@@ -417,12 +417,12 @@ struct fpga_bridge
if (!ptr)
return NULL;
- bridge = fpga_bridge_create(dev, name, br_ops, priv);
+ bridge = fpga_bridge_create(parent, name, br_ops, priv);
if (!bridge) {
devres_free(ptr);
} else {
*ptr = bridge;
- devres_add(dev, ptr);
+ devres_add(parent, ptr);
}
return bridge;
@@ -430,7 +430,7 @@ struct fpga_bridge
EXPORT_SYMBOL_GPL(devm_fpga_bridge_create);
/**
- * fpga_bridge_register - register a FPGA bridge
+ * fpga_bridge_register - register an FPGA bridge
*
* @bridge: FPGA bridge struct
*
@@ -454,11 +454,11 @@ int fpga_bridge_register(struct fpga_bridge *bridge)
EXPORT_SYMBOL_GPL(fpga_bridge_register);
/**
- * fpga_bridge_unregister - unregister a FPGA bridge
+ * fpga_bridge_unregister - unregister an FPGA bridge
*
* @bridge: FPGA bridge struct
*
- * This function is intended for use in a FPGA bridge driver's remove function.
+ * This function is intended for use in an FPGA bridge driver's remove function.
*/
void fpga_bridge_unregister(struct fpga_bridge *bridge)
{
diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c
index b85bc47c91a9..ecb4c3c795fa 100644
--- a/drivers/fpga/fpga-mgr.c
+++ b/drivers/fpga/fpga-mgr.c
@@ -26,7 +26,7 @@ struct fpga_mgr_devres {
};
/**
- * fpga_image_info_alloc - Allocate a FPGA image info struct
+ * fpga_image_info_alloc - Allocate an FPGA image info struct
* @dev: owning device
*
* Return: struct fpga_image_info or NULL
@@ -50,7 +50,7 @@ struct fpga_image_info *fpga_image_info_alloc(struct device *dev)
EXPORT_SYMBOL_GPL(fpga_image_info_alloc);
/**
- * fpga_image_info_free - Free a FPGA image info struct
+ * fpga_image_info_free - Free an FPGA image info struct
* @info: FPGA image info struct to free
*/
void fpga_image_info_free(struct fpga_image_info *info)
@@ -470,7 +470,7 @@ static int fpga_mgr_dev_match(struct device *dev, const void *data)
}
/**
- * fpga_mgr_get - Given a device, get a reference to a fpga mgr.
+ * fpga_mgr_get - Given a device, get a reference to an fpga mgr.
* @dev: parent device that fpga mgr was registered with
*
* Return: fpga manager struct or IS_ERR() condition containing error code.
@@ -487,7 +487,7 @@ struct fpga_manager *fpga_mgr_get(struct device *dev)
EXPORT_SYMBOL_GPL(fpga_mgr_get);
/**
- * of_fpga_mgr_get - Given a device node, get a reference to a fpga mgr.
+ * of_fpga_mgr_get - Given a device node, get a reference to an fpga mgr.
*
* @node: device node
*
@@ -506,7 +506,7 @@ struct fpga_manager *of_fpga_mgr_get(struct device_node *node)
EXPORT_SYMBOL_GPL(of_fpga_mgr_get);
/**
- * fpga_mgr_put - release a reference to a fpga manager
+ * fpga_mgr_put - release a reference to an fpga manager
* @mgr: fpga manager structure
*/
void fpga_mgr_put(struct fpga_manager *mgr)
@@ -550,8 +550,8 @@ void fpga_mgr_unlock(struct fpga_manager *mgr)
EXPORT_SYMBOL_GPL(fpga_mgr_unlock);
/**
- * fpga_mgr_create - create and initialize a FPGA manager struct
- * @dev: fpga manager device from pdev
+ * fpga_mgr_create - create and initialize an FPGA manager struct
+ * @parent: fpga manager device from pdev
* @name: fpga manager name
* @mops: pointer to structure of fpga manager ops
* @priv: fpga manager private data
@@ -561,7 +561,7 @@ EXPORT_SYMBOL_GPL(fpga_mgr_unlock);
*
* Return: pointer to struct fpga_manager or NULL
*/
-struct fpga_manager *fpga_mgr_create(struct device *dev, const char *name,
+struct fpga_manager *fpga_mgr_create(struct device *parent, const char *name,
const struct fpga_manager_ops *mops,
void *priv)
{
@@ -571,12 +571,12 @@ struct fpga_manager *fpga_mgr_create(struct device *dev, const char *name,
if (!mops || !mops->write_complete || !mops->state ||
!mops->write_init || (!mops->write && !mops->write_sg) ||
(mops->write && mops->write_sg)) {
- dev_err(dev, "Attempt to register without fpga_manager_ops\n");
+ dev_err(parent, "Attempt to register without fpga_manager_ops\n");
return NULL;
}
if (!name || !strlen(name)) {
- dev_err(dev, "Attempt to register with no name!\n");
+ dev_err(parent, "Attempt to register with no name!\n");
return NULL;
}
@@ -597,8 +597,8 @@ struct fpga_manager *fpga_mgr_create(struct device *dev, const char *name,
device_initialize(&mgr->dev);
mgr->dev.class = fpga_mgr_class;
mgr->dev.groups = mops->groups;
- mgr->dev.parent = dev;
- mgr->dev.of_node = dev->of_node;
+ mgr->dev.parent = parent;
+ mgr->dev.of_node = parent->of_node;
mgr->dev.id = id;
ret = dev_set_name(&mgr->dev, "fpga%d", id);
@@ -617,7 +617,7 @@ error_kfree:
EXPORT_SYMBOL_GPL(fpga_mgr_create);
/**
- * fpga_mgr_free - free a FPGA manager created with fpga_mgr_create()
+ * fpga_mgr_free - free an FPGA manager created with fpga_mgr_create()
* @mgr: fpga manager struct
*/
void fpga_mgr_free(struct fpga_manager *mgr)
@@ -636,12 +636,12 @@ static void devm_fpga_mgr_release(struct device *dev, void *res)
/**
* devm_fpga_mgr_create - create and initialize a managed FPGA manager struct
- * @dev: fpga manager device from pdev
+ * @parent: fpga manager device from pdev
* @name: fpga manager name
* @mops: pointer to structure of fpga manager ops
* @priv: fpga manager private data
*
- * This function is intended for use in a FPGA manager driver's probe function.
+ * This function is intended for use in an FPGA manager driver's probe function.
* After the manager driver creates the manager struct with
* devm_fpga_mgr_create(), it should register it with fpga_mgr_register(). The
* manager driver's remove function should call fpga_mgr_unregister(). The
@@ -651,7 +651,7 @@ static void devm_fpga_mgr_release(struct device *dev, void *res)
*
* Return: pointer to struct fpga_manager or NULL
*/
-struct fpga_manager *devm_fpga_mgr_create(struct device *dev, const char *name,
+struct fpga_manager *devm_fpga_mgr_create(struct device *parent, const char *name,
const struct fpga_manager_ops *mops,
void *priv)
{
@@ -661,20 +661,20 @@ struct fpga_manager *devm_fpga_mgr_create(struct device *dev, const char *name,
if (!dr)
return NULL;
- dr->mgr = fpga_mgr_create(dev, name, mops, priv);
+ dr->mgr = fpga_mgr_create(parent, name, mops, priv);
if (!dr->mgr) {
devres_free(dr);
return NULL;
}
- devres_add(dev, dr);
+ devres_add(parent, dr);
return dr->mgr;
}
EXPORT_SYMBOL_GPL(devm_fpga_mgr_create);
/**
- * fpga_mgr_register - register a FPGA manager
+ * fpga_mgr_register - register an FPGA manager
* @mgr: fpga manager struct
*
* Return: 0 on success, negative error code otherwise.
@@ -706,10 +706,10 @@ error_device:
EXPORT_SYMBOL_GPL(fpga_mgr_register);
/**
- * fpga_mgr_unregister - unregister a FPGA manager
+ * fpga_mgr_unregister - unregister an FPGA manager
* @mgr: fpga manager struct
*
- * This function is intended for use in a FPGA manager driver's remove function.
+ * This function is intended for use in an FPGA manager driver's remove function.
*/
void fpga_mgr_unregister(struct fpga_manager *mgr)
{
diff --git a/drivers/fpga/fpga-region.c b/drivers/fpga/fpga-region.c
index c3134b89c3fe..a4838715221f 100644
--- a/drivers/fpga/fpga-region.c
+++ b/drivers/fpga/fpga-region.c
@@ -33,14 +33,14 @@ struct fpga_region *fpga_region_class_find(
EXPORT_SYMBOL_GPL(fpga_region_class_find);
/**
- * fpga_region_get - get an exclusive reference to a fpga region
+ * fpga_region_get - get an exclusive reference to an fpga region
* @region: FPGA Region struct
*
* Caller should call fpga_region_put() when done with region.
*
* Return fpga_region struct if successful.
* Return -EBUSY if someone already has a reference to the region.
- * Return -ENODEV if @np is not a FPGA Region.
+ * Return -ENODEV if @np is not an FPGA Region.
*/
static struct fpga_region *fpga_region_get(struct fpga_region *region)
{
@@ -181,7 +181,7 @@ ATTRIBUTE_GROUPS(fpga_region);
/**
* fpga_region_create - alloc and init a struct fpga_region
- * @dev: device parent
+ * @parent: device parent
* @mgr: manager that programs this region
* @get_bridges: optional function to get bridges to a list
*
@@ -192,7 +192,7 @@ ATTRIBUTE_GROUPS(fpga_region);
* Return: struct fpga_region or NULL
*/
struct fpga_region
-*fpga_region_create(struct device *dev,
+*fpga_region_create(struct device *parent,
struct fpga_manager *mgr,
int (*get_bridges)(struct fpga_region *))
{
@@ -214,8 +214,8 @@ struct fpga_region
device_initialize(&region->dev);
region->dev.class = fpga_region_class;
- region->dev.parent = dev;
- region->dev.of_node = dev->of_node;
+ region->dev.parent = parent;
+ region->dev.of_node = parent->of_node;
region->dev.id = id;
ret = dev_set_name(&region->dev, "region%d", id);
@@ -234,7 +234,7 @@ err_free:
EXPORT_SYMBOL_GPL(fpga_region_create);
/**
- * fpga_region_free - free a FPGA region created by fpga_region_create()
+ * fpga_region_free - free an FPGA region created by fpga_region_create()
* @region: FPGA region
*/
void fpga_region_free(struct fpga_region *region)
@@ -253,11 +253,11 @@ static void devm_fpga_region_release(struct device *dev, void *res)
/**
* devm_fpga_region_create - create and initialize a managed FPGA region struct
- * @dev: device parent
+ * @parent: device parent
* @mgr: manager that programs this region
* @get_bridges: optional function to get bridges to a list
*
- * This function is intended for use in a FPGA region driver's probe function.
+ * This function is intended for use in an FPGA region driver's probe function.
* After the region driver creates the region struct with
* devm_fpga_region_create(), it should register it with fpga_region_register().
* The region driver's remove function should call fpga_region_unregister().
@@ -268,7 +268,7 @@ static void devm_fpga_region_release(struct device *dev, void *res)
* Return: struct fpga_region or NULL
*/
struct fpga_region
-*devm_fpga_region_create(struct device *dev,
+*devm_fpga_region_create(struct device *parent,
struct fpga_manager *mgr,
int (*get_bridges)(struct fpga_region *))
{
@@ -278,12 +278,12 @@ struct fpga_region
if (!ptr)
return NULL;
- region = fpga_region_create(dev, mgr, get_bridges);
+ region = fpga_region_create(parent, mgr, get_bridges);
if (!region) {
devres_free(ptr);
} else {
*ptr = region;
- devres_add(dev, ptr);
+ devres_add(parent, ptr);
}
return region;
@@ -291,7 +291,7 @@ struct fpga_region
EXPORT_SYMBOL_GPL(devm_fpga_region_create);
/**
- * fpga_region_register - register a FPGA region
+ * fpga_region_register - register an FPGA region
* @region: FPGA region
*
* Return: 0 or -errno
@@ -303,10 +303,10 @@ int fpga_region_register(struct fpga_region *region)
EXPORT_SYMBOL_GPL(fpga_region_register);
/**
- * fpga_region_unregister - unregister a FPGA region
+ * fpga_region_unregister - unregister an FPGA region
* @region: FPGA region
*
- * This function is intended for use in a FPGA region driver's remove function.
+ * This function is intended for use in an FPGA region driver's remove function.
*/
void fpga_region_unregister(struct fpga_region *region)
{
diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c
index 114a64d2b7a4..1afb41aa20d7 100644
--- a/drivers/fpga/machxo2-spi.c
+++ b/drivers/fpga/machxo2-spi.c
@@ -374,11 +374,13 @@ static int machxo2_spi_probe(struct spi_device *spi)
return devm_fpga_mgr_register(dev, mgr);
}
+#ifdef CONFIG_OF
static const struct of_device_id of_match[] = {
{ .compatible = "lattice,machxo2-slave-spi", },
{}
};
MODULE_DEVICE_TABLE(of, of_match);
+#endif
static const struct spi_device_id lattice_ids[] = {
{ "machxo2-slave-spi", 0 },
diff --git a/drivers/fpga/of-fpga-region.c b/drivers/fpga/of-fpga-region.c
index e405309baadc..e3c25576b6b9 100644
--- a/drivers/fpga/of-fpga-region.c
+++ b/drivers/fpga/of-fpga-region.c
@@ -181,7 +181,7 @@ static int child_regions_with_firmware(struct device_node *overlay)
* @region: FPGA region
* @overlay: overlay applied to the FPGA region
*
- * Given an overlay applied to a FPGA region, parse the FPGA image specific
+ * Given an overlay applied to an FPGA region, parse the FPGA image specific
* info in the overlay and do some checking.
*
* Returns:
@@ -273,7 +273,7 @@ ret_no_info:
* @region: FPGA region that the overlay was applied to
* @nd: overlay notification data
*
- * Called when an overlay targeted to a FPGA Region is about to be applied.
+ * Called when an overlay targeted to an FPGA Region is about to be applied.
* Parses the overlay for properties that influence how the FPGA will be
* programmed and does some checking. If the checks pass, programs the FPGA.
* If the checks fail, overlay is rejected and does not get added to the
@@ -336,8 +336,8 @@ static void of_fpga_region_notify_post_remove(struct fpga_region *region,
* @action: notifier action
* @arg: reconfig data
*
- * This notifier handles programming a FPGA when a "firmware-name" property is
- * added to a fpga-region.
+ * This notifier handles programming an FPGA when a "firmware-name" property is
+ * added to an fpga-region.
*
* Returns NOTIFY_OK or error if FPGA programming fails.
*/
diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c
index 657a70c5fc99..a2cea500f7cc 100644
--- a/drivers/fpga/stratix10-soc.c
+++ b/drivers/fpga/stratix10-soc.c
@@ -271,7 +271,7 @@ static int s10_send_buf(struct fpga_manager *mgr, const char *buf, size_t count)
}
/*
- * Send a FPGA image to privileged layers to write to the FPGA. When done
+ * Send an FPGA image to privileged layers to write to the FPGA. When done
* sending, free all service layer buffers we allocated in write_init.
*/
static int s10_ops_write(struct fpga_manager *mgr, const char *buf,
@@ -454,6 +454,7 @@ static int s10_remove(struct platform_device *pdev)
struct s10_priv *priv = mgr->priv;
fpga_mgr_unregister(mgr);
+ fpga_mgr_free(mgr);
stratix10_svc_free_channel(priv->chan);
return 0;
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4e60e84cd17a..59ddc9fd5bca 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -724,7 +724,7 @@ static ssize_t cfam_read(struct file *filep, char __user *buf, size_t count,
rc = count;
fail:
*offset = off;
- return count;
+ return rc;
}
static ssize_t cfam_write(struct file *filep, const char __user *buf,
@@ -761,7 +761,7 @@ static ssize_t cfam_write(struct file *filep, const char __user *buf,
rc = count;
fail:
*offset = off;
- return count;
+ return rc;
}
static loff_t cfam_llseek(struct file *file, loff_t offset, int whence)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 90dbe58ca1ed..8606e55c1721 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -92,7 +92,7 @@ static const u32 fsi_base = 0xa0000000;
static u16 aspeed_fsi_divisor = FSI_DIVISOR_DEFAULT;
module_param_named(bus_div,aspeed_fsi_divisor, ushort, 0);
-#define OPB_POLL_TIMEOUT 10000
+#define OPB_POLL_TIMEOUT 500
static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
u32 val, u32 transfer_size)
@@ -101,11 +101,15 @@ static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
u32 reg, status;
int ret;
- writel(CMD_WRITE, base + OPB0_RW);
- writel(transfer_size, base + OPB0_XFER_SIZE);
- writel(addr, base + OPB0_FSI_ADDR);
- writel(val, base + OPB0_FSI_DATA_W);
- writel(0x1, base + OPB_IRQ_CLEAR);
+ /*
+ * The ordering of these writes up until the trigger
+ * write does not matter, so use writel_relaxed.
+ */
+ writel_relaxed(CMD_WRITE, base + OPB0_RW);
+ writel_relaxed(transfer_size, base + OPB0_XFER_SIZE);
+ writel_relaxed(addr, base + OPB0_FSI_ADDR);
+ writel_relaxed(val, base + OPB0_FSI_DATA_W);
+ writel_relaxed(0x1, base + OPB_IRQ_CLEAR);
writel(0x1, base + OPB_TRIGGER);
ret = readl_poll_timeout(base + OPB_IRQ_STATUS, reg,
@@ -149,10 +153,14 @@ static int __opb_read(struct fsi_master_aspeed *aspeed, uint32_t addr,
u32 result, reg;
int status, ret;
- writel(CMD_READ, base + OPB0_RW);
- writel(transfer_size, base + OPB0_XFER_SIZE);
- writel(addr, base + OPB0_FSI_ADDR);
- writel(0x1, base + OPB_IRQ_CLEAR);
+ /*
+ * The ordering of these writes up until the trigger
+ * write does not matter, so use writel_relaxed.
+ */
+ writel_relaxed(CMD_READ, base + OPB0_RW);
+ writel_relaxed(transfer_size, base + OPB0_XFER_SIZE);
+ writel_relaxed(addr, base + OPB0_FSI_ADDR);
+ writel_relaxed(0x1, base + OPB_IRQ_CLEAR);
writel(0x1, base + OPB_TRIGGER);
ret = readl_poll_timeout(base + OPB_IRQ_STATUS, reg,
@@ -525,7 +533,6 @@ static int tacoma_cabled_fsi_fixup(struct device *dev)
static int fsi_master_aspeed_probe(struct platform_device *pdev)
{
struct fsi_master_aspeed *aspeed;
- struct resource *res;
int rc, links, reg;
__be32 raw;
@@ -541,8 +548,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
aspeed->dev = &pdev->dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- aspeed->base = devm_ioremap_resource(&pdev->dev, res);
+ aspeed->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(aspeed->base))
return PTR_ERR(aspeed->base);
@@ -645,6 +651,7 @@ static const struct of_device_id fsi_master_aspeed_match[] = {
{ .compatible = "aspeed,ast2600-fsi-master" },
{ },
};
+MODULE_DEVICE_TABLE(of, fsi_master_aspeed_match);
static struct platform_driver fsi_master_aspeed_driver = {
.driver = {
diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c
index 57a779a89b07..24292acdbaf8 100644
--- a/drivers/fsi/fsi-master-ast-cf.c
+++ b/drivers/fsi/fsi-master-ast-cf.c
@@ -1309,7 +1309,6 @@ static int fsi_master_acf_probe(struct platform_device *pdev)
master->cf_mem = devm_ioremap_resource(&pdev->dev, &res);
if (IS_ERR(master->cf_mem)) {
rc = PTR_ERR(master->cf_mem);
- dev_err(&pdev->dev, "Error %d mapping coldfire memory\n", rc);
goto err_free;
}
dev_dbg(&pdev->dev, "DRAM allocation @%x\n", master->cf_mem_addr);
@@ -1427,6 +1426,7 @@ static const struct of_device_id fsi_master_acf_match[] = {
{ .compatible = "aspeed,ast2500-cf-fsi-master" },
{ },
};
+MODULE_DEVICE_TABLE(of, fsi_master_acf_match);
static struct platform_driver fsi_master_acf = {
.driver = {
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index aa97c4a250cb..7d5f29b4b595 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -882,6 +882,7 @@ static const struct of_device_id fsi_master_gpio_match[] = {
{ .compatible = "fsi-master-gpio" },
{ },
};
+MODULE_DEVICE_TABLE(of, fsi_master_gpio_match);
static struct platform_driver fsi_master_gpio_driver = {
.driver = {
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index 10ca2e290655..b223f0ef337b 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -223,7 +223,8 @@ static const struct file_operations occ_fops = {
.release = occ_release,
};
-static int occ_verify_checksum(struct occ_response *resp, u16 data_length)
+static int occ_verify_checksum(struct occ *occ, struct occ_response *resp,
+ u16 data_length)
{
/* Fetch the two bytes after the data for the checksum. */
u16 checksum_resp = get_unaligned_be16(&resp->data[data_length]);
@@ -238,8 +239,11 @@ static int occ_verify_checksum(struct occ_response *resp, u16 data_length)
for (i = 0; i < data_length; ++i)
checksum += resp->data[i];
- if (checksum != checksum_resp)
+ if (checksum != checksum_resp) {
+ dev_err(occ->dev, "Bad checksum: %04x!=%04x\n", checksum,
+ checksum_resp);
return -EBADMSG;
+ }
return 0;
}
@@ -495,6 +499,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
goto done;
if (resp->return_status == OCC_RESP_CMD_IN_PRG ||
+ resp->return_status == OCC_RESP_CRIT_INIT ||
resp->seq_no != seq_no) {
rc = -ETIMEDOUT;
@@ -532,7 +537,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
}
*resp_len = resp_data_length + 7;
- rc = occ_verify_checksum(resp, resp_data_length);
+ rc = occ_verify_checksum(occ, resp, resp_data_length);
done:
mutex_unlock(&occ->occ_lock);
@@ -635,6 +640,7 @@ static const struct of_device_id occ_match[] = {
},
{ },
};
+MODULE_DEVICE_TABLE(of, occ_match);
static struct platform_driver occ_driver = {
.driver = {
diff --git a/drivers/fsi/fsi-sbefifo.c b/drivers/fsi/fsi-sbefifo.c
index bfd5e5da8020..84cb965bfed5 100644
--- a/drivers/fsi/fsi-sbefifo.c
+++ b/drivers/fsi/fsi-sbefifo.c
@@ -325,7 +325,8 @@ static int sbefifo_up_write(struct sbefifo *sbefifo, __be32 word)
static int sbefifo_request_reset(struct sbefifo *sbefifo)
{
struct device *dev = &sbefifo->fsi_dev->dev;
- u32 status, timeout;
+ unsigned long end_time;
+ u32 status;
int rc;
dev_dbg(dev, "Requesting FIFO reset\n");
@@ -341,7 +342,8 @@ static int sbefifo_request_reset(struct sbefifo *sbefifo)
}
/* Wait for it to complete */
- for (timeout = 0; timeout < SBEFIFO_RESET_TIMEOUT; timeout++) {
+ end_time = jiffies + msecs_to_jiffies(SBEFIFO_RESET_TIMEOUT);
+ while (!time_after(jiffies, end_time)) {
rc = sbefifo_regr(sbefifo, SBEFIFO_UP | SBEFIFO_STS, &status);
if (rc) {
dev_err(dev, "Failed to read UP fifo status during reset"
@@ -355,7 +357,7 @@ static int sbefifo_request_reset(struct sbefifo *sbefifo)
return 0;
}
- msleep(1);
+ cond_resched();
}
dev_err(dev, "FIFO reset timed out\n");
@@ -400,7 +402,7 @@ static int sbefifo_cleanup_hw(struct sbefifo *sbefifo)
/* The FIFO already contains a reset request from the SBE ? */
if (down_status & SBEFIFO_STS_RESET_REQ) {
dev_info(dev, "Cleanup: FIFO reset request set, resetting\n");
- rc = sbefifo_regw(sbefifo, SBEFIFO_UP, SBEFIFO_PERFORM_RESET);
+ rc = sbefifo_regw(sbefifo, SBEFIFO_DOWN, SBEFIFO_PERFORM_RESET);
if (rc) {
sbefifo->broken = true;
dev_err(dev, "Cleanup: Reset reg write failed, rc=%d\n", rc);
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
index b45bfab7b7f5..da1486bb6a14 100644
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@@ -38,9 +38,10 @@
#define SCOM_STATUS_PIB_RESP_MASK 0x00007000
#define SCOM_STATUS_PIB_RESP_SHIFT 12
-#define SCOM_STATUS_ANY_ERR (SCOM_STATUS_PROTECTION | \
- SCOM_STATUS_PARITY | \
- SCOM_STATUS_PIB_ABORT | \
+#define SCOM_STATUS_FSI2PIB_ERROR (SCOM_STATUS_PROTECTION | \
+ SCOM_STATUS_PARITY | \
+ SCOM_STATUS_PIB_ABORT)
+#define SCOM_STATUS_ANY_ERR (SCOM_STATUS_FSI2PIB_ERROR | \
SCOM_STATUS_PIB_RESP_MASK)
/* SCOM address encodings */
#define XSCOM_ADDR_IND_FLAG BIT_ULL(63)
@@ -60,7 +61,6 @@
#define XSCOM_ADDR_FORM1_HI_SHIFT 20
/* Retries */
-#define SCOM_MAX_RETRIES 100 /* Retries on busy */
#define SCOM_MAX_IND_RETRIES 10 /* Retries indirect not ready */
struct scom_device {
@@ -240,14 +240,15 @@ static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status)
{
uint32_t dummy = -1;
- if (status & SCOM_STATUS_PROTECTION)
- return -EPERM;
- if (status & SCOM_STATUS_PARITY) {
+ if (status & SCOM_STATUS_FSI2PIB_ERROR)
fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
sizeof(uint32_t));
+
+ if (status & SCOM_STATUS_PROTECTION)
+ return -EPERM;
+ if (status & SCOM_STATUS_PARITY)
return -EIO;
- }
- /* Return -EBUSY on PIB abort to force a retry */
+
if (status & SCOM_STATUS_PIB_ABORT)
return -EBUSY;
return 0;
@@ -284,69 +285,39 @@ static int handle_pib_status(struct scom_device *scom, uint8_t status)
static int put_scom(struct scom_device *scom, uint64_t value,
uint64_t addr)
{
- uint32_t status, dummy = -1;
- int rc, retries;
-
- for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) {
- rc = raw_put_scom(scom, value, addr, &status);
- if (rc) {
- /* Try resetting the bridge if FSI fails */
- if (rc != -ENODEV && retries == 0) {
- fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG,
- &dummy, sizeof(uint32_t));
- rc = -EBUSY;
- } else
- return rc;
- } else
- rc = handle_fsi2pib_status(scom, status);
- if (rc && rc != -EBUSY)
- break;
- if (rc == 0) {
- rc = handle_pib_status(scom,
- (status & SCOM_STATUS_PIB_RESP_MASK)
- >> SCOM_STATUS_PIB_RESP_SHIFT);
- if (rc && rc != -EBUSY)
- break;
- }
- if (rc == 0)
- break;
- msleep(1);
- }
- return rc;
+ uint32_t status;
+ int rc;
+
+ rc = raw_put_scom(scom, value, addr, &status);
+ if (rc == -ENODEV)
+ return rc;
+
+ rc = handle_fsi2pib_status(scom, status);
+ if (rc)
+ return rc;
+
+ return handle_pib_status(scom,
+ (status & SCOM_STATUS_PIB_RESP_MASK)
+ >> SCOM_STATUS_PIB_RESP_SHIFT);
}
static int get_scom(struct scom_device *scom, uint64_t *value,
uint64_t addr)
{
- uint32_t status, dummy = -1;
- int rc, retries;
-
- for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) {
- rc = raw_get_scom(scom, value, addr, &status);
- if (rc) {
- /* Try resetting the bridge if FSI fails */
- if (rc != -ENODEV && retries == 0) {
- fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG,
- &dummy, sizeof(uint32_t));
- rc = -EBUSY;
- } else
- return rc;
- } else
- rc = handle_fsi2pib_status(scom, status);
- if (rc && rc != -EBUSY)
- break;
- if (rc == 0) {
- rc = handle_pib_status(scom,
- (status & SCOM_STATUS_PIB_RESP_MASK)
- >> SCOM_STATUS_PIB_RESP_SHIFT);
- if (rc && rc != -EBUSY)
- break;
- }
- if (rc == 0)
- break;
- msleep(1);
- }
- return rc;
+ uint32_t status;
+ int rc;
+
+ rc = raw_get_scom(scom, value, addr, &status);
+ if (rc == -ENODEV)
+ return rc;
+
+ rc = handle_fsi2pib_status(scom, status);
+ if (rc)
+ return rc;
+
+ return handle_pib_status(scom,
+ (status & SCOM_STATUS_PIB_RESP_MASK)
+ >> SCOM_STATUS_PIB_RESP_SHIFT);
}
static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index 967532afb1c0..0d68a78be980 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -1151,6 +1151,8 @@ int occ_setup(struct occ *occ, const char *name)
{
int rc;
+ /* start with 1 to avoid false match with zero-initialized SRAM buffer */
+ occ->seq_no = 1;
mutex_init(&occ->lock);
occ->groups[0] = &occ->group;
@@ -1160,8 +1162,9 @@ int occ_setup(struct occ *occ, const char *name)
dev_info(occ->bus_dev, "host is not ready\n");
return rc;
} else if (rc < 0) {
- dev_err(occ->bus_dev, "failed to get OCC poll response: %d\n",
- rc);
+ dev_err(occ->bus_dev,
+ "failed to get OCC poll response=%02x: %d\n",
+ occ->resp.return_status, rc);
return rc;
}
diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
index 6c68d34d956e..1002605db8ba 100644
--- a/drivers/hwtracing/coresight/coresight-core.c
+++ b/drivers/hwtracing/coresight/coresight-core.c
@@ -608,7 +608,7 @@ static struct coresight_device *
coresight_find_enabled_sink(struct coresight_device *csdev)
{
int i;
- struct coresight_device *sink;
+ struct coresight_device *sink = NULL;
if ((csdev->type == CORESIGHT_DEV_TYPE_SINK ||
csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) &&
@@ -886,7 +886,6 @@ void coresight_release_path(struct list_head *path)
}
kfree(path);
- path = NULL;
}
/* return true if the device is a suitable type for a default sink */
@@ -1392,7 +1391,7 @@ static int coresight_fixup_device_conns(struct coresight_device *csdev)
}
}
- return 0;
+ return ret;
}
static int coresight_remove_match(struct device *dev, void *data)
@@ -1730,9 +1729,9 @@ char *coresight_alloc_device_name(struct coresight_dev_list *dict,
if (idx < 0) {
/* Make space for the new entry */
idx = dict->nr_idx;
- list = krealloc(dict->fwnode_list,
- (idx + 1) * sizeof(*dict->fwnode_list),
- GFP_KERNEL);
+ list = krealloc_array(dict->fwnode_list,
+ idx + 1, sizeof(*dict->fwnode_list),
+ GFP_KERNEL);
if (ZERO_OR_NULL_PTR(list)) {
idx = -ENOMEM;
goto done;
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index db881993c211..da27cd4a3c38 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -568,11 +568,6 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata,
struct etmv4_config *config = &drvdata->config;
struct perf_event_attr *attr = &event->attr;
- if (!attr) {
- ret = -EINVAL;
- goto out;
- }
-
/* Clear configuration from previous run */
memset(config, 0, sizeof(struct etmv4_config));
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index 45b85edfc690..cd0fb7bfba68 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -530,7 +530,7 @@ static unsigned long tmc_update_etf_buffer(struct coresight_device *csdev,
buf_ptr = buf->data_pages[cur] + offset;
*buf_ptr = readl_relaxed(drvdata->base + TMC_RRD);
- if (lost && *barrier) {
+ if (lost && i < CORESIGHT_BARRIER_PKT_SIZE) {
*buf_ptr = *barrier;
barrier++;
}
diff --git a/drivers/hwtracing/intel_th/core.c b/drivers/hwtracing/intel_th/core.c
index 24d0c974bfd5..66eed2dff818 100644
--- a/drivers/hwtracing/intel_th/core.c
+++ b/drivers/hwtracing/intel_th/core.c
@@ -100,16 +100,18 @@ static int intel_th_remove(struct device *dev)
struct intel_th_driver *thdrv = to_intel_th_driver(dev->driver);
struct intel_th_device *thdev = to_intel_th_device(dev);
struct intel_th_device *hub = to_intel_th_hub(thdev);
- int err;
if (thdev->type == INTEL_TH_SWITCH) {
struct intel_th *th = to_intel_th(hub);
int i, lowest;
- /* disconnect outputs */
- err = device_for_each_child(dev, thdev, intel_th_child_remove);
- if (err)
- return err;
+ /*
+ * disconnect outputs
+ *
+ * intel_th_child_remove returns 0 unconditionally, so there is
+ * no need to check the return value of device_for_each_child.
+ */
+ device_for_each_child(dev, thdev, intel_th_child_remove);
/*
* Remove outputs, that is, hub's children: they are created
@@ -215,6 +217,22 @@ static ssize_t port_show(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR_RO(port);
+static void intel_th_trace_prepare(struct intel_th_device *thdev)
+{
+ struct intel_th_device *hub = to_intel_th_hub(thdev);
+ struct intel_th_driver *hubdrv = to_intel_th_driver(hub->dev.driver);
+
+ if (hub->type != INTEL_TH_SWITCH)
+ return;
+
+ if (thdev->type != INTEL_TH_OUTPUT)
+ return;
+
+ pm_runtime_get_sync(&thdev->dev);
+ hubdrv->prepare(hub, &thdev->output);
+ pm_runtime_put(&thdev->dev);
+}
+
static int intel_th_output_activate(struct intel_th_device *thdev)
{
struct intel_th_driver *thdrv =
@@ -235,6 +253,7 @@ static int intel_th_output_activate(struct intel_th_device *thdev)
if (ret)
goto fail_put;
+ intel_th_trace_prepare(thdev);
if (thdrv->activate)
ret = thdrv->activate(thdev);
else
diff --git a/drivers/hwtracing/intel_th/gth.c b/drivers/hwtracing/intel_th/gth.c
index 28509b02a0b5..b3308934a687 100644
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -564,6 +564,21 @@ static void gth_tscu_resync(struct gth_device *gth)
iowrite32(reg, gth->base + REG_TSCU_TSUCTRL);
}
+static void intel_th_gth_prepare(struct intel_th_device *thdev,
+ struct intel_th_output *output)
+{
+ struct gth_device *gth = dev_get_drvdata(&thdev->dev);
+ int count;
+
+ /*
+ * Wait until the output port is in reset before we start
+ * programming it.
+ */
+ for (count = GTH_PLE_WAITLOOP_DEPTH;
+ count && !(gth_output_get(gth, output->port) & BIT(5)); count--)
+ cpu_relax();
+}
+
/**
* intel_th_gth_enable() - enable tracing to an output device
* @thdev: GTH device
@@ -815,6 +830,7 @@ static struct intel_th_driver intel_th_gth_driver = {
.assign = intel_th_gth_assign,
.unassign = intel_th_gth_unassign,
.set_output = intel_th_gth_set_output,
+ .prepare = intel_th_gth_prepare,
.enable = intel_th_gth_enable,
.trig_switch = intel_th_gth_switch,
.disable = intel_th_gth_disable,
diff --git a/drivers/hwtracing/intel_th/intel_th.h b/drivers/hwtracing/intel_th/intel_th.h
index 89c67e0e1d34..0ffb42990175 100644
--- a/drivers/hwtracing/intel_th/intel_th.h
+++ b/drivers/hwtracing/intel_th/intel_th.h
@@ -143,6 +143,7 @@ intel_th_output_assigned(struct intel_th_device *thdev)
* @remove: remove method
* @assign: match a given output type device against available outputs
* @unassign: deassociate an output type device from an output port
+ * @prepare: prepare output port for tracing
* @enable: enable tracing for a given output device
* @disable: disable tracing for a given output device
* @irq: interrupt callback
@@ -164,6 +165,8 @@ struct intel_th_driver {
struct intel_th_device *othdev);
void (*unassign)(struct intel_th_device *thdev,
struct intel_th_device *othdev);
+ void (*prepare)(struct intel_th_device *thdev,
+ struct intel_th_output *output);
void (*enable)(struct intel_th_device *thdev,
struct intel_th_output *output);
void (*trig_switch)(struct intel_th_device *thdev,
diff --git a/drivers/hwtracing/intel_th/msu.c b/drivers/hwtracing/intel_th/msu.c
index 2edc4666633d..432ade0842f6 100644
--- a/drivers/hwtracing/intel_th/msu.c
+++ b/drivers/hwtracing/intel_th/msu.c
@@ -1024,33 +1024,49 @@ err_nomem:
}
#ifdef CONFIG_X86
-static void msc_buffer_set_uc(struct msc_window *win, unsigned int nr_segs)
+static void msc_buffer_set_uc(struct msc *msc)
{
struct scatterlist *sg_ptr;
+ struct msc_window *win;
int i;
- for_each_sg(win->sgt->sgl, sg_ptr, nr_segs, i) {
- /* Set the page as uncached */
- set_memory_uc((unsigned long)sg_virt(sg_ptr),
- PFN_DOWN(sg_ptr->length));
+ if (msc->mode == MSC_MODE_SINGLE) {
+ set_memory_uc((unsigned long)msc->base, msc->nr_pages);
+ return;
+ }
+
+ list_for_each_entry(win, &msc->win_list, entry) {
+ for_each_sg(win->sgt->sgl, sg_ptr, win->nr_segs, i) {
+ /* Set the page as uncached */
+ set_memory_uc((unsigned long)sg_virt(sg_ptr),
+ PFN_DOWN(sg_ptr->length));
+ }
}
}
-static void msc_buffer_set_wb(struct msc_window *win)
+static void msc_buffer_set_wb(struct msc *msc)
{
struct scatterlist *sg_ptr;
+ struct msc_window *win;
int i;
- for_each_sg(win->sgt->sgl, sg_ptr, win->nr_segs, i) {
- /* Reset the page to write-back */
- set_memory_wb((unsigned long)sg_virt(sg_ptr),
- PFN_DOWN(sg_ptr->length));
+ if (msc->mode == MSC_MODE_SINGLE) {
+ set_memory_wb((unsigned long)msc->base, msc->nr_pages);
+ return;
+ }
+
+ list_for_each_entry(win, &msc->win_list, entry) {
+ for_each_sg(win->sgt->sgl, sg_ptr, win->nr_segs, i) {
+ /* Reset the page to write-back */
+ set_memory_wb((unsigned long)sg_virt(sg_ptr),
+ PFN_DOWN(sg_ptr->length));
+ }
}
}
#else /* !X86 */
static inline void
-msc_buffer_set_uc(struct msc_window *win, unsigned int nr_segs) {}
-static inline void msc_buffer_set_wb(struct msc_window *win) {}
+msc_buffer_set_uc(struct msc *msc) {}
+static inline void msc_buffer_set_wb(struct msc *msc) {}
#endif /* CONFIG_X86 */
/**
@@ -1097,8 +1113,6 @@ static int msc_buffer_win_alloc(struct msc *msc, unsigned int nr_blocks)
if (ret <= 0)
goto err_nomem;
- msc_buffer_set_uc(win, ret);
-
win->nr_segs = ret;
win->nr_blocks = nr_blocks;
@@ -1152,8 +1166,6 @@ static void msc_buffer_win_free(struct msc *msc, struct msc_window *win)
msc->base_addr = 0;
}
- msc_buffer_set_wb(win);
-
if (msc->mbuf && msc->mbuf->free_window)
msc->mbuf->free_window(msc->mbuf_priv, win->sgt);
else
@@ -1260,6 +1272,8 @@ static int msc_buffer_multi_alloc(struct msc *msc, unsigned long *nr_pages,
*/
static void msc_buffer_free(struct msc *msc)
{
+ msc_buffer_set_wb(msc);
+
if (msc->mode == MSC_MODE_SINGLE)
msc_buffer_contig_free(msc);
else if (msc->mode == MSC_MODE_MULTI)
@@ -1303,6 +1317,8 @@ static int msc_buffer_alloc(struct msc *msc, unsigned long *nr_pages,
}
if (!ret) {
+ msc_buffer_set_uc(msc);
+
/* allocation should be visible before the counter goes to 0 */
smp_mb__before_atomic();
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index cdb3e11462c6..0d7a2500d0b8 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -74,6 +74,15 @@ config INTERCONNECT_QCOM_SC7180
This is a driver for the Qualcomm Network-on-Chip on sc7180-based
platforms.
+config INTERCONNECT_QCOM_SC7280
+ tristate "Qualcomm SC7280 interconnect driver"
+ depends on INTERCONNECT_QCOM_RPMH_POSSIBLE
+ select INTERCONNECT_QCOM_RPMH
+ select INTERCONNECT_QCOM_BCM_VOTER
+ help
+ This is a driver for the Qualcomm Network-on-Chip on sc7280-based
+ platforms.
+
config INTERCONNECT_QCOM_SDM660
tristate "Qualcomm SDM660 interconnect driver"
depends on INTERCONNECT_QCOM
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 46fc62447156..2880129a6fe4 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -8,6 +8,7 @@ icc-osm-l3-objs := osm-l3.o
qnoc-qcs404-objs := qcs404.o
icc-rpmh-obj := icc-rpmh.o
qnoc-sc7180-objs := sc7180.o
+qnoc-sc7280-objs := sc7280.o
qnoc-sdm660-objs := sdm660.o
qnoc-sdm845-objs := sdm845.o
qnoc-sdx55-objs := sdx55.o
@@ -24,6 +25,7 @@ obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o
obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o
obj-$(CONFIG_INTERCONNECT_QCOM_SC7180) += qnoc-sc7180.o
+obj-$(CONFIG_INTERCONNECT_QCOM_SC7280) += qnoc-sc7280.o
obj-$(CONFIG_INTERCONNECT_QCOM_SDM660) += qnoc-sdm660.o
obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
obj-$(CONFIG_INTERCONNECT_QCOM_SDX55) += qnoc-sdx55.o
diff --git a/drivers/interconnect/qcom/sc7280.c b/drivers/interconnect/qcom/sc7280.c
new file mode 100644
index 000000000000..8d1b55c3705c
--- /dev/null
+++ b/drivers/interconnect/qcom/sc7280.c
@@ -0,0 +1,1938 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/interconnect.h>
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <dt-bindings/interconnect/qcom,sc7280.h>
+
+#include "bcm-voter.h"
+#include "icc-rpmh.h"
+#include "sc7280.h"
+
+static struct qcom_icc_node qhm_qspi = {
+ .name = "qhm_qspi",
+ .id = SC7280_MASTER_QSPI_0,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node qhm_qup0 = {
+ .name = "qhm_qup0",
+ .id = SC7280_MASTER_QUP_0,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node qhm_qup1 = {
+ .name = "qhm_qup1",
+ .id = SC7280_MASTER_QUP_1,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node qnm_a1noc_cfg = {
+ .name = "qnm_a1noc_cfg",
+ .id = SC7280_MASTER_A1NOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SERVICE_A1NOC },
+};
+
+static struct qcom_icc_node xm_sdc1 = {
+ .name = "xm_sdc1",
+ .id = SC7280_MASTER_SDCC_1,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node xm_sdc2 = {
+ .name = "xm_sdc2",
+ .id = SC7280_MASTER_SDCC_2,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node xm_sdc4 = {
+ .name = "xm_sdc4",
+ .id = SC7280_MASTER_SDCC_4,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node xm_ufs_mem = {
+ .name = "xm_ufs_mem",
+ .id = SC7280_MASTER_UFS_MEM,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node xm_usb2 = {
+ .name = "xm_usb2",
+ .id = SC7280_MASTER_USB2,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node xm_usb3_0 = {
+ .name = "xm_usb3_0",
+ .id = SC7280_MASTER_USB3_0,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node qhm_qdss_bam = {
+ .name = "qhm_qdss_bam",
+ .id = SC7280_MASTER_QDSS_BAM,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A2NOC_SNOC },
+};
+
+static struct qcom_icc_node qnm_a2noc_cfg = {
+ .name = "qnm_a2noc_cfg",
+ .id = SC7280_MASTER_A2NOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SERVICE_A2NOC },
+};
+
+static struct qcom_icc_node qnm_cnoc_datapath = {
+ .name = "qnm_cnoc_datapath",
+ .id = SC7280_MASTER_CNOC_A2NOC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A2NOC_SNOC },
+};
+
+static struct qcom_icc_node qxm_crypto = {
+ .name = "qxm_crypto",
+ .id = SC7280_MASTER_CRYPTO,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A2NOC_SNOC },
+};
+
+static struct qcom_icc_node qxm_ipa = {
+ .name = "qxm_ipa",
+ .id = SC7280_MASTER_IPA,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A2NOC_SNOC },
+};
+
+static struct qcom_icc_node xm_pcie3_0 = {
+ .name = "xm_pcie3_0",
+ .id = SC7280_MASTER_PCIE_0,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_ANOC_PCIE_GEM_NOC },
+};
+
+static struct qcom_icc_node xm_pcie3_1 = {
+ .name = "xm_pcie3_1",
+ .id = SC7280_MASTER_PCIE_1,
+ .channels = 1,
+ .buswidth = 8,
+ .links = { SC7280_SLAVE_ANOC_PCIE_GEM_NOC },
+};
+
+static struct qcom_icc_node xm_qdss_etr = {
+ .name = "xm_qdss_etr",
+ .id = SC7280_MASTER_QDSS_ETR,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_A2NOC_SNOC },
+};
+
+static struct qcom_icc_node qup0_core_master = {
+ .name = "qup0_core_master",
+ .id = SC7280_MASTER_QUP_CORE_0,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_QUP_CORE_0 },
+};
+
+static struct qcom_icc_node qup1_core_master = {
+ .name = "qup1_core_master",
+ .id = SC7280_MASTER_QUP_CORE_1,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_QUP_CORE_1 },
+};
+
+static struct qcom_icc_node qnm_cnoc3_cnoc2 = {
+ .name = "qnm_cnoc3_cnoc2",
+ .id = SC7280_MASTER_CNOC3_CNOC2,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 44,
+ .links = { SC7280_SLAVE_AHB2PHY_SOUTH, SC7280_SLAVE_AHB2PHY_NORTH,
+ SC7280_SLAVE_CAMERA_CFG, SC7280_SLAVE_CLK_CTL,
+ SC7280_SLAVE_CDSP_CFG, SC7280_SLAVE_RBCPR_CX_CFG,
+ SC7280_SLAVE_RBCPR_MX_CFG, SC7280_SLAVE_CRYPTO_0_CFG,
+ SC7280_SLAVE_CX_RDPM, SC7280_SLAVE_DCC_CFG,
+ SC7280_SLAVE_DISPLAY_CFG, SC7280_SLAVE_GFX3D_CFG,
+ SC7280_SLAVE_HWKM, SC7280_SLAVE_IMEM_CFG,
+ SC7280_SLAVE_IPA_CFG, SC7280_SLAVE_IPC_ROUTER_CFG,
+ SC7280_SLAVE_LPASS, SC7280_SLAVE_CNOC_MSS,
+ SC7280_SLAVE_MX_RDPM, SC7280_SLAVE_PCIE_0_CFG,
+ SC7280_SLAVE_PCIE_1_CFG, SC7280_SLAVE_PDM,
+ SC7280_SLAVE_PIMEM_CFG, SC7280_SLAVE_PKA_WRAPPER_CFG,
+ SC7280_SLAVE_PMU_WRAPPER_CFG, SC7280_SLAVE_QDSS_CFG,
+ SC7280_SLAVE_QSPI_0, SC7280_SLAVE_QUP_0,
+ SC7280_SLAVE_QUP_1, SC7280_SLAVE_SDCC_1,
+ SC7280_SLAVE_SDCC_2, SC7280_SLAVE_SDCC_4,
+ SC7280_SLAVE_SECURITY, SC7280_SLAVE_TCSR,
+ SC7280_SLAVE_TLMM, SC7280_SLAVE_UFS_MEM_CFG,
+ SC7280_SLAVE_USB2, SC7280_SLAVE_USB3_0,
+ SC7280_SLAVE_VENUS_CFG, SC7280_SLAVE_VSENSE_CTRL_CFG,
+ SC7280_SLAVE_A1NOC_CFG, SC7280_SLAVE_A2NOC_CFG,
+ SC7280_SLAVE_CNOC_MNOC_CFG, SC7280_SLAVE_SNOC_CFG },
+};
+
+static struct qcom_icc_node xm_qdss_dap = {
+ .name = "xm_qdss_dap",
+ .id = SC7280_MASTER_QDSS_DAP,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 45,
+ .links = { SC7280_SLAVE_AHB2PHY_SOUTH, SC7280_SLAVE_AHB2PHY_NORTH,
+ SC7280_SLAVE_CAMERA_CFG, SC7280_SLAVE_CLK_CTL,
+ SC7280_SLAVE_CDSP_CFG, SC7280_SLAVE_RBCPR_CX_CFG,
+ SC7280_SLAVE_RBCPR_MX_CFG, SC7280_SLAVE_CRYPTO_0_CFG,
+ SC7280_SLAVE_CX_RDPM, SC7280_SLAVE_DCC_CFG,
+ SC7280_SLAVE_DISPLAY_CFG, SC7280_SLAVE_GFX3D_CFG,
+ SC7280_SLAVE_HWKM, SC7280_SLAVE_IMEM_CFG,
+ SC7280_SLAVE_IPA_CFG, SC7280_SLAVE_IPC_ROUTER_CFG,
+ SC7280_SLAVE_LPASS, SC7280_SLAVE_CNOC_MSS,
+ SC7280_SLAVE_MX_RDPM, SC7280_SLAVE_PCIE_0_CFG,
+ SC7280_SLAVE_PCIE_1_CFG, SC7280_SLAVE_PDM,
+ SC7280_SLAVE_PIMEM_CFG, SC7280_SLAVE_PKA_WRAPPER_CFG,
+ SC7280_SLAVE_PMU_WRAPPER_CFG, SC7280_SLAVE_QDSS_CFG,
+ SC7280_SLAVE_QSPI_0, SC7280_SLAVE_QUP_0,
+ SC7280_SLAVE_QUP_1, SC7280_SLAVE_SDCC_1,
+ SC7280_SLAVE_SDCC_2, SC7280_SLAVE_SDCC_4,
+ SC7280_SLAVE_SECURITY, SC7280_SLAVE_TCSR,
+ SC7280_SLAVE_TLMM, SC7280_SLAVE_UFS_MEM_CFG,
+ SC7280_SLAVE_USB2, SC7280_SLAVE_USB3_0,
+ SC7280_SLAVE_VENUS_CFG, SC7280_SLAVE_VSENSE_CTRL_CFG,
+ SC7280_SLAVE_A1NOC_CFG, SC7280_SLAVE_A2NOC_CFG,
+ SC7280_SLAVE_CNOC2_CNOC3, SC7280_SLAVE_CNOC_MNOC_CFG,
+ SC7280_SLAVE_SNOC_CFG },
+};
+
+static struct qcom_icc_node qnm_cnoc2_cnoc3 = {
+ .name = "qnm_cnoc2_cnoc3",
+ .id = SC7280_MASTER_CNOC2_CNOC3,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 9,
+ .links = { SC7280_SLAVE_AOSS, SC7280_SLAVE_APPSS,
+ SC7280_SLAVE_CNOC_A2NOC, SC7280_SLAVE_DDRSS_CFG,
+ SC7280_SLAVE_BOOT_IMEM, SC7280_SLAVE_IMEM,
+ SC7280_SLAVE_PIMEM, SC7280_SLAVE_QDSS_STM,
+ SC7280_SLAVE_TCU },
+};
+
+static struct qcom_icc_node qnm_gemnoc_cnoc = {
+ .name = "qnm_gemnoc_cnoc",
+ .id = SC7280_MASTER_GEM_NOC_CNOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 9,
+ .links = { SC7280_SLAVE_AOSS, SC7280_SLAVE_APPSS,
+ SC7280_SLAVE_CNOC3_CNOC2, SC7280_SLAVE_DDRSS_CFG,
+ SC7280_SLAVE_BOOT_IMEM, SC7280_SLAVE_IMEM,
+ SC7280_SLAVE_PIMEM, SC7280_SLAVE_QDSS_STM,
+ SC7280_SLAVE_TCU },
+};
+
+static struct qcom_icc_node qnm_gemnoc_pcie = {
+ .name = "qnm_gemnoc_pcie",
+ .id = SC7280_MASTER_GEM_NOC_PCIE_SNOC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_PCIE_0, SC7280_SLAVE_PCIE_1 },
+};
+
+static struct qcom_icc_node qnm_cnoc_dc_noc = {
+ .name = "qnm_cnoc_dc_noc",
+ .id = SC7280_MASTER_CNOC_DC_NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_LLCC_CFG, SC7280_SLAVE_GEM_NOC_CFG },
+};
+
+static struct qcom_icc_node alm_gpu_tcu = {
+ .name = "alm_gpu_tcu",
+ .id = SC7280_MASTER_GPU_TCU,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node alm_sys_tcu = {
+ .name = "alm_sys_tcu",
+ .id = SC7280_MASTER_SYS_TCU,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node chm_apps = {
+ .name = "chm_apps",
+ .id = SC7280_MASTER_APPSS_PROC,
+ .channels = 1,
+ .buswidth = 32,
+ .num_links = 3,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC,
+ SC7280_SLAVE_MEM_NOC_PCIE_SNOC },
+};
+
+static struct qcom_icc_node qnm_cmpnoc = {
+ .name = "qnm_cmpnoc",
+ .id = SC7280_MASTER_COMPUTE_NOC,
+ .channels = 2,
+ .buswidth = 32,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node qnm_gemnoc_cfg = {
+ .name = "qnm_gemnoc_cfg",
+ .id = SC7280_MASTER_GEM_NOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 5,
+ .links = { SC7280_SLAVE_MSS_PROC_MS_MPU_CFG, SC7280_SLAVE_MCDMA_MS_MPU_CFG,
+ SC7280_SLAVE_SERVICE_GEM_NOC_1, SC7280_SLAVE_SERVICE_GEM_NOC_2,
+ SC7280_SLAVE_SERVICE_GEM_NOC },
+};
+
+static struct qcom_icc_node qnm_gpu = {
+ .name = "qnm_gpu",
+ .id = SC7280_MASTER_GFX3D,
+ .channels = 2,
+ .buswidth = 32,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node qnm_mnoc_hf = {
+ .name = "qnm_mnoc_hf",
+ .id = SC7280_MASTER_MNOC_HF_MEM_NOC,
+ .channels = 2,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node qnm_mnoc_sf = {
+ .name = "qnm_mnoc_sf",
+ .id = SC7280_MASTER_MNOC_SF_MEM_NOC,
+ .channels = 1,
+ .buswidth = 32,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node qnm_pcie = {
+ .name = "qnm_pcie",
+ .id = SC7280_MASTER_ANOC_PCIE_GEM_NOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 2,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node qnm_snoc_gc = {
+ .name = "qnm_snoc_gc",
+ .id = SC7280_MASTER_SNOC_GC_MEM_NOC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_LLCC },
+};
+
+static struct qcom_icc_node qnm_snoc_sf = {
+ .name = "qnm_snoc_sf",
+ .id = SC7280_MASTER_SNOC_SF_MEM_NOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 3,
+ .links = { SC7280_SLAVE_GEM_NOC_CNOC, SC7280_SLAVE_LLCC,
+ SC7280_SLAVE_MEM_NOC_PCIE_SNOC },
+};
+
+static struct qcom_icc_node qhm_config_noc = {
+ .name = "qhm_config_noc",
+ .id = SC7280_MASTER_CNOC_LPASS_AG_NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 6,
+ .links = { SC7280_SLAVE_LPASS_CORE_CFG, SC7280_SLAVE_LPASS_LPI_CFG,
+ SC7280_SLAVE_LPASS_MPU_CFG, SC7280_SLAVE_LPASS_TOP_CFG,
+ SC7280_SLAVE_SERVICES_LPASS_AML_NOC, SC7280_SLAVE_SERVICE_LPASS_AG_NOC },
+};
+
+static struct qcom_icc_node llcc_mc = {
+ .name = "llcc_mc",
+ .id = SC7280_MASTER_LLCC,
+ .channels = 2,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_EBI1 },
+};
+
+static struct qcom_icc_node qnm_mnoc_cfg = {
+ .name = "qnm_mnoc_cfg",
+ .id = SC7280_MASTER_CNOC_MNOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SERVICE_MNOC },
+};
+
+static struct qcom_icc_node qnm_video0 = {
+ .name = "qnm_video0",
+ .id = SC7280_MASTER_VIDEO_P0,
+ .channels = 1,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_MNOC_SF_MEM_NOC },
+};
+
+static struct qcom_icc_node qnm_video_cpu = {
+ .name = "qnm_video_cpu",
+ .id = SC7280_MASTER_VIDEO_PROC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_MNOC_SF_MEM_NOC },
+};
+
+static struct qcom_icc_node qxm_camnoc_hf = {
+ .name = "qxm_camnoc_hf",
+ .id = SC7280_MASTER_CAMNOC_HF,
+ .channels = 2,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_MNOC_HF_MEM_NOC },
+};
+
+static struct qcom_icc_node qxm_camnoc_icp = {
+ .name = "qxm_camnoc_icp",
+ .id = SC7280_MASTER_CAMNOC_ICP,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_MNOC_SF_MEM_NOC },
+};
+
+static struct qcom_icc_node qxm_camnoc_sf = {
+ .name = "qxm_camnoc_sf",
+ .id = SC7280_MASTER_CAMNOC_SF,
+ .channels = 1,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_MNOC_SF_MEM_NOC },
+};
+
+static struct qcom_icc_node qxm_mdp0 = {
+ .name = "qxm_mdp0",
+ .id = SC7280_MASTER_MDP0,
+ .channels = 1,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_MNOC_HF_MEM_NOC },
+};
+
+static struct qcom_icc_node qhm_nsp_noc_config = {
+ .name = "qhm_nsp_noc_config",
+ .id = SC7280_MASTER_CDSP_NOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SERVICE_NSP_NOC },
+};
+
+static struct qcom_icc_node qxm_nsp = {
+ .name = "qxm_nsp",
+ .id = SC7280_MASTER_CDSP_PROC,
+ .channels = 2,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_CDSP_MEM_NOC },
+};
+
+static struct qcom_icc_node qnm_aggre1_noc = {
+ .name = "qnm_aggre1_noc",
+ .id = SC7280_MASTER_A1NOC_SNOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SNOC_GEM_NOC_SF },
+};
+
+static struct qcom_icc_node qnm_aggre2_noc = {
+ .name = "qnm_aggre2_noc",
+ .id = SC7280_MASTER_A2NOC_SNOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SNOC_GEM_NOC_SF },
+};
+
+static struct qcom_icc_node qnm_snoc_cfg = {
+ .name = "qnm_snoc_cfg",
+ .id = SC7280_MASTER_SNOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SERVICE_SNOC },
+};
+
+static struct qcom_icc_node qxm_pimem = {
+ .name = "qxm_pimem",
+ .id = SC7280_MASTER_PIMEM,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SNOC_GEM_NOC_GC },
+};
+
+static struct qcom_icc_node xm_gic = {
+ .name = "xm_gic",
+ .id = SC7280_MASTER_GIC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_SLAVE_SNOC_GEM_NOC_GC },
+};
+
+static struct qcom_icc_node qns_a1noc_snoc = {
+ .name = "qns_a1noc_snoc",
+ .id = SC7280_SLAVE_A1NOC_SNOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_MASTER_A1NOC_SNOC },
+};
+
+static struct qcom_icc_node srvc_aggre1_noc = {
+ .name = "srvc_aggre1_noc",
+ .id = SC7280_SLAVE_SERVICE_A1NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_a2noc_snoc = {
+ .name = "qns_a2noc_snoc",
+ .id = SC7280_SLAVE_A2NOC_SNOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_MASTER_A2NOC_SNOC },
+};
+
+static struct qcom_icc_node qns_pcie_mem_noc = {
+ .name = "qns_pcie_mem_noc",
+ .id = SC7280_SLAVE_ANOC_PCIE_GEM_NOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_MASTER_ANOC_PCIE_GEM_NOC },
+};
+
+static struct qcom_icc_node srvc_aggre2_noc = {
+ .name = "srvc_aggre2_noc",
+ .id = SC7280_SLAVE_SERVICE_A2NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qup0_core_slave = {
+ .name = "qup0_core_slave",
+ .id = SC7280_SLAVE_QUP_CORE_0,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qup1_core_slave = {
+ .name = "qup1_core_slave",
+ .id = SC7280_SLAVE_QUP_CORE_1,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_ahb2phy0 = {
+ .name = "qhs_ahb2phy0",
+ .id = SC7280_SLAVE_AHB2PHY_SOUTH,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_ahb2phy1 = {
+ .name = "qhs_ahb2phy1",
+ .id = SC7280_SLAVE_AHB2PHY_NORTH,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_camera_cfg = {
+ .name = "qhs_camera_cfg",
+ .id = SC7280_SLAVE_CAMERA_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_clk_ctl = {
+ .name = "qhs_clk_ctl",
+ .id = SC7280_SLAVE_CLK_CTL,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_compute_cfg = {
+ .name = "qhs_compute_cfg",
+ .id = SC7280_SLAVE_CDSP_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_CDSP_NOC_CFG },
+};
+
+static struct qcom_icc_node qhs_cpr_cx = {
+ .name = "qhs_cpr_cx",
+ .id = SC7280_SLAVE_RBCPR_CX_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_cpr_mx = {
+ .name = "qhs_cpr_mx",
+ .id = SC7280_SLAVE_RBCPR_MX_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_crypto0_cfg = {
+ .name = "qhs_crypto0_cfg",
+ .id = SC7280_SLAVE_CRYPTO_0_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_cx_rdpm = {
+ .name = "qhs_cx_rdpm",
+ .id = SC7280_SLAVE_CX_RDPM,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_dcc_cfg = {
+ .name = "qhs_dcc_cfg",
+ .id = SC7280_SLAVE_DCC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_display_cfg = {
+ .name = "qhs_display_cfg",
+ .id = SC7280_SLAVE_DISPLAY_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_gpuss_cfg = {
+ .name = "qhs_gpuss_cfg",
+ .id = SC7280_SLAVE_GFX3D_CFG,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_hwkm = {
+ .name = "qhs_hwkm",
+ .id = SC7280_SLAVE_HWKM,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_imem_cfg = {
+ .name = "qhs_imem_cfg",
+ .id = SC7280_SLAVE_IMEM_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_ipa = {
+ .name = "qhs_ipa",
+ .id = SC7280_SLAVE_IPA_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_ipc_router = {
+ .name = "qhs_ipc_router",
+ .id = SC7280_SLAVE_IPC_ROUTER_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_lpass_cfg = {
+ .name = "qhs_lpass_cfg",
+ .id = SC7280_SLAVE_LPASS,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_CNOC_LPASS_AG_NOC },
+};
+
+static struct qcom_icc_node qhs_mss_cfg = {
+ .name = "qhs_mss_cfg",
+ .id = SC7280_SLAVE_CNOC_MSS,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_mx_rdpm = {
+ .name = "qhs_mx_rdpm",
+ .id = SC7280_SLAVE_MX_RDPM,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_pcie0_cfg = {
+ .name = "qhs_pcie0_cfg",
+ .id = SC7280_SLAVE_PCIE_0_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_pcie1_cfg = {
+ .name = "qhs_pcie1_cfg",
+ .id = SC7280_SLAVE_PCIE_1_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_pdm = {
+ .name = "qhs_pdm",
+ .id = SC7280_SLAVE_PDM,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_pimem_cfg = {
+ .name = "qhs_pimem_cfg",
+ .id = SC7280_SLAVE_PIMEM_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_pka_wrapper_cfg = {
+ .name = "qhs_pka_wrapper_cfg",
+ .id = SC7280_SLAVE_PKA_WRAPPER_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_pmu_wrapper_cfg = {
+ .name = "qhs_pmu_wrapper_cfg",
+ .id = SC7280_SLAVE_PMU_WRAPPER_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_qdss_cfg = {
+ .name = "qhs_qdss_cfg",
+ .id = SC7280_SLAVE_QDSS_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_qspi = {
+ .name = "qhs_qspi",
+ .id = SC7280_SLAVE_QSPI_0,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_qup0 = {
+ .name = "qhs_qup0",
+ .id = SC7280_SLAVE_QUP_0,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_qup1 = {
+ .name = "qhs_qup1",
+ .id = SC7280_SLAVE_QUP_1,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_sdc1 = {
+ .name = "qhs_sdc1",
+ .id = SC7280_SLAVE_SDCC_1,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_sdc2 = {
+ .name = "qhs_sdc2",
+ .id = SC7280_SLAVE_SDCC_2,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_sdc4 = {
+ .name = "qhs_sdc4",
+ .id = SC7280_SLAVE_SDCC_4,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_security = {
+ .name = "qhs_security",
+ .id = SC7280_SLAVE_SECURITY,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_tcsr = {
+ .name = "qhs_tcsr",
+ .id = SC7280_SLAVE_TCSR,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_tlmm = {
+ .name = "qhs_tlmm",
+ .id = SC7280_SLAVE_TLMM,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_ufs_mem_cfg = {
+ .name = "qhs_ufs_mem_cfg",
+ .id = SC7280_SLAVE_UFS_MEM_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_usb2 = {
+ .name = "qhs_usb2",
+ .id = SC7280_SLAVE_USB2,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_usb3_0 = {
+ .name = "qhs_usb3_0",
+ .id = SC7280_SLAVE_USB3_0,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_venus_cfg = {
+ .name = "qhs_venus_cfg",
+ .id = SC7280_SLAVE_VENUS_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_vsense_ctrl_cfg = {
+ .name = "qhs_vsense_ctrl_cfg",
+ .id = SC7280_SLAVE_VSENSE_CTRL_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_a1_noc_cfg = {
+ .name = "qns_a1_noc_cfg",
+ .id = SC7280_SLAVE_A1NOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_A1NOC_CFG },
+};
+
+static struct qcom_icc_node qns_a2_noc_cfg = {
+ .name = "qns_a2_noc_cfg",
+ .id = SC7280_SLAVE_A2NOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_A2NOC_CFG },
+};
+
+static struct qcom_icc_node qns_cnoc2_cnoc3 = {
+ .name = "qns_cnoc2_cnoc3",
+ .id = SC7280_SLAVE_CNOC2_CNOC3,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_MASTER_CNOC2_CNOC3 },
+};
+
+static struct qcom_icc_node qns_mnoc_cfg = {
+ .name = "qns_mnoc_cfg",
+ .id = SC7280_SLAVE_CNOC_MNOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_CNOC_MNOC_CFG },
+};
+
+static struct qcom_icc_node qns_snoc_cfg = {
+ .name = "qns_snoc_cfg",
+ .id = SC7280_SLAVE_SNOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_SNOC_CFG },
+};
+
+static struct qcom_icc_node qhs_aoss = {
+ .name = "qhs_aoss",
+ .id = SC7280_SLAVE_AOSS,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_apss = {
+ .name = "qhs_apss",
+ .id = SC7280_SLAVE_APPSS,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_cnoc3_cnoc2 = {
+ .name = "qns_cnoc3_cnoc2",
+ .id = SC7280_SLAVE_CNOC3_CNOC2,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_MASTER_CNOC3_CNOC2 },
+};
+
+static struct qcom_icc_node qns_cnoc_a2noc = {
+ .name = "qns_cnoc_a2noc",
+ .id = SC7280_SLAVE_CNOC_A2NOC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_MASTER_CNOC_A2NOC },
+};
+
+static struct qcom_icc_node qns_ddrss_cfg = {
+ .name = "qns_ddrss_cfg",
+ .id = SC7280_SLAVE_DDRSS_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_CNOC_DC_NOC },
+};
+
+static struct qcom_icc_node qxs_boot_imem = {
+ .name = "qxs_boot_imem",
+ .id = SC7280_SLAVE_BOOT_IMEM,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qxs_imem = {
+ .name = "qxs_imem",
+ .id = SC7280_SLAVE_IMEM,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qxs_pimem = {
+ .name = "qxs_pimem",
+ .id = SC7280_SLAVE_PIMEM,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node xs_pcie_0 = {
+ .name = "xs_pcie_0",
+ .id = SC7280_SLAVE_PCIE_0,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node xs_pcie_1 = {
+ .name = "xs_pcie_1",
+ .id = SC7280_SLAVE_PCIE_1,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node xs_qdss_stm = {
+ .name = "xs_qdss_stm",
+ .id = SC7280_SLAVE_QDSS_STM,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node xs_sys_tcu_cfg = {
+ .name = "xs_sys_tcu_cfg",
+ .id = SC7280_SLAVE_TCU,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_llcc = {
+ .name = "qhs_llcc",
+ .id = SC7280_SLAVE_LLCC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_gemnoc = {
+ .name = "qns_gemnoc",
+ .id = SC7280_SLAVE_GEM_NOC_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 1,
+ .links = { SC7280_MASTER_GEM_NOC_CFG },
+};
+
+static struct qcom_icc_node qhs_mdsp_ms_mpu_cfg = {
+ .name = "qhs_mdsp_ms_mpu_cfg",
+ .id = SC7280_SLAVE_MSS_PROC_MS_MPU_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_modem_ms_mpu_cfg = {
+ .name = "qhs_modem_ms_mpu_cfg",
+ .id = SC7280_SLAVE_MCDMA_MS_MPU_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_gem_noc_cnoc = {
+ .name = "qns_gem_noc_cnoc",
+ .id = SC7280_SLAVE_GEM_NOC_CNOC,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_MASTER_GEM_NOC_CNOC },
+};
+
+static struct qcom_icc_node qns_llcc = {
+ .name = "qns_llcc",
+ .id = SC7280_SLAVE_LLCC,
+ .channels = 2,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_MASTER_LLCC },
+};
+
+static struct qcom_icc_node qns_pcie = {
+ .name = "qns_pcie",
+ .id = SC7280_SLAVE_MEM_NOC_PCIE_SNOC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_MASTER_GEM_NOC_PCIE_SNOC },
+};
+
+static struct qcom_icc_node srvc_even_gemnoc = {
+ .name = "srvc_even_gemnoc",
+ .id = SC7280_SLAVE_SERVICE_GEM_NOC_1,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node srvc_odd_gemnoc = {
+ .name = "srvc_odd_gemnoc",
+ .id = SC7280_SLAVE_SERVICE_GEM_NOC_2,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node srvc_sys_gemnoc = {
+ .name = "srvc_sys_gemnoc",
+ .id = SC7280_SLAVE_SERVICE_GEM_NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_lpass_core = {
+ .name = "qhs_lpass_core",
+ .id = SC7280_SLAVE_LPASS_CORE_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_lpass_lpi = {
+ .name = "qhs_lpass_lpi",
+ .id = SC7280_SLAVE_LPASS_LPI_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_lpass_mpu = {
+ .name = "qhs_lpass_mpu",
+ .id = SC7280_SLAVE_LPASS_MPU_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qhs_lpass_top = {
+ .name = "qhs_lpass_top",
+ .id = SC7280_SLAVE_LPASS_TOP_CFG,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node srvc_niu_aml_noc = {
+ .name = "srvc_niu_aml_noc",
+ .id = SC7280_SLAVE_SERVICES_LPASS_AML_NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node srvc_niu_lpass_agnoc = {
+ .name = "srvc_niu_lpass_agnoc",
+ .id = SC7280_SLAVE_SERVICE_LPASS_AG_NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node ebi = {
+ .name = "ebi",
+ .id = SC7280_SLAVE_EBI1,
+ .channels = 2,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_mem_noc_hf = {
+ .name = "qns_mem_noc_hf",
+ .id = SC7280_SLAVE_MNOC_HF_MEM_NOC,
+ .channels = 2,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_MASTER_MNOC_HF_MEM_NOC },
+};
+
+static struct qcom_icc_node qns_mem_noc_sf = {
+ .name = "qns_mem_noc_sf",
+ .id = SC7280_SLAVE_MNOC_SF_MEM_NOC,
+ .channels = 1,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_MASTER_MNOC_SF_MEM_NOC },
+};
+
+static struct qcom_icc_node srvc_mnoc = {
+ .name = "srvc_mnoc",
+ .id = SC7280_SLAVE_SERVICE_MNOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_nsp_gemnoc = {
+ .name = "qns_nsp_gemnoc",
+ .id = SC7280_SLAVE_CDSP_MEM_NOC,
+ .channels = 2,
+ .buswidth = 32,
+ .num_links = 1,
+ .links = { SC7280_MASTER_COMPUTE_NOC },
+};
+
+static struct qcom_icc_node service_nsp_noc = {
+ .name = "service_nsp_noc",
+ .id = SC7280_SLAVE_SERVICE_NSP_NOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_node qns_gemnoc_gc = {
+ .name = "qns_gemnoc_gc",
+ .id = SC7280_SLAVE_SNOC_GEM_NOC_GC,
+ .channels = 1,
+ .buswidth = 8,
+ .num_links = 1,
+ .links = { SC7280_MASTER_SNOC_GC_MEM_NOC },
+};
+
+static struct qcom_icc_node qns_gemnoc_sf = {
+ .name = "qns_gemnoc_sf",
+ .id = SC7280_SLAVE_SNOC_GEM_NOC_SF,
+ .channels = 1,
+ .buswidth = 16,
+ .num_links = 1,
+ .links = { SC7280_MASTER_SNOC_SF_MEM_NOC },
+};
+
+static struct qcom_icc_node srvc_snoc = {
+ .name = "srvc_snoc",
+ .id = SC7280_SLAVE_SERVICE_SNOC,
+ .channels = 1,
+ .buswidth = 4,
+ .num_links = 0,
+};
+
+static struct qcom_icc_bcm bcm_acv = {
+ .name = "ACV",
+ .num_nodes = 1,
+ .nodes = { &ebi },
+};
+
+static struct qcom_icc_bcm bcm_ce0 = {
+ .name = "CE0",
+ .num_nodes = 1,
+ .nodes = { &qxm_crypto },
+};
+
+static struct qcom_icc_bcm bcm_cn0 = {
+ .name = "CN0",
+ .keepalive = true,
+ .num_nodes = 2,
+ .nodes = { &qnm_gemnoc_cnoc, &qnm_gemnoc_pcie },
+};
+
+static struct qcom_icc_bcm bcm_cn1 = {
+ .name = "CN1",
+ .num_nodes = 47,
+ .nodes = { &qnm_cnoc3_cnoc2, &xm_qdss_dap,
+ &qhs_ahb2phy0, &qhs_ahb2phy1,
+ &qhs_camera_cfg, &qhs_clk_ctl,
+ &qhs_compute_cfg, &qhs_cpr_cx,
+ &qhs_cpr_mx, &qhs_crypto0_cfg,
+ &qhs_cx_rdpm, &qhs_dcc_cfg,
+ &qhs_display_cfg, &qhs_gpuss_cfg,
+ &qhs_hwkm, &qhs_imem_cfg,
+ &qhs_ipa, &qhs_ipc_router,
+ &qhs_mss_cfg, &qhs_mx_rdpm,
+ &qhs_pcie0_cfg, &qhs_pcie1_cfg,
+ &qhs_pimem_cfg, &qhs_pka_wrapper_cfg,
+ &qhs_pmu_wrapper_cfg, &qhs_qdss_cfg,
+ &qhs_qup0, &qhs_qup1,
+ &qhs_security, &qhs_tcsr,
+ &qhs_tlmm, &qhs_ufs_mem_cfg, &qhs_usb2,
+ &qhs_usb3_0, &qhs_venus_cfg,
+ &qhs_vsense_ctrl_cfg, &qns_a1_noc_cfg,
+ &qns_a2_noc_cfg, &qns_cnoc2_cnoc3,
+ &qns_mnoc_cfg, &qns_snoc_cfg,
+ &qnm_cnoc2_cnoc3, &qhs_aoss,
+ &qhs_apss, &qns_cnoc3_cnoc2,
+ &qns_cnoc_a2noc, &qns_ddrss_cfg },
+};
+
+static struct qcom_icc_bcm bcm_cn2 = {
+ .name = "CN2",
+ .num_nodes = 6,
+ .nodes = { &qhs_lpass_cfg, &qhs_pdm,
+ &qhs_qspi, &qhs_sdc1,
+ &qhs_sdc2, &qhs_sdc4 },
+};
+
+static struct qcom_icc_bcm bcm_co0 = {
+ .name = "CO0",
+ .num_nodes = 1,
+ .nodes = { &qns_nsp_gemnoc },
+};
+
+static struct qcom_icc_bcm bcm_co3 = {
+ .name = "CO3",
+ .num_nodes = 1,
+ .nodes = { &qxm_nsp },
+};
+
+static struct qcom_icc_bcm bcm_mc0 = {
+ .name = "MC0",
+ .keepalive = true,
+ .num_nodes = 1,
+ .nodes = { &ebi },
+};
+
+static struct qcom_icc_bcm bcm_mm0 = {
+ .name = "MM0",
+ .keepalive = true,
+ .num_nodes = 1,
+ .nodes = { &qns_mem_noc_hf },
+};
+
+static struct qcom_icc_bcm bcm_mm1 = {
+ .name = "MM1",
+ .num_nodes = 2,
+ .nodes = { &qxm_camnoc_hf, &qxm_mdp0 },
+};
+
+static struct qcom_icc_bcm bcm_mm4 = {
+ .name = "MM4",
+ .num_nodes = 1,
+ .nodes = { &qns_mem_noc_sf },
+};
+
+static struct qcom_icc_bcm bcm_mm5 = {
+ .name = "MM5",
+ .num_nodes = 3,
+ .nodes = { &qnm_video0, &qxm_camnoc_icp,
+ &qxm_camnoc_sf },
+};
+
+static struct qcom_icc_bcm bcm_qup0 = {
+ .name = "QUP0",
+ .vote_scale = 1,
+ .num_nodes = 1,
+ .nodes = { &qup0_core_slave },
+};
+
+static struct qcom_icc_bcm bcm_qup1 = {
+ .name = "QUP1",
+ .vote_scale = 1,
+ .num_nodes = 1,
+ .nodes = { &qup1_core_slave },
+};
+
+static struct qcom_icc_bcm bcm_sh0 = {
+ .name = "SH0",
+ .keepalive = true,
+ .num_nodes = 1,
+ .nodes = { &qns_llcc },
+};
+
+static struct qcom_icc_bcm bcm_sh2 = {
+ .name = "SH2",
+ .num_nodes = 2,
+ .nodes = { &alm_gpu_tcu, &alm_sys_tcu },
+};
+
+static struct qcom_icc_bcm bcm_sh3 = {
+ .name = "SH3",
+ .num_nodes = 1,
+ .nodes = { &qnm_cmpnoc },
+};
+
+static struct qcom_icc_bcm bcm_sh4 = {
+ .name = "SH4",
+ .num_nodes = 1,
+ .nodes = { &chm_apps },
+};
+
+static struct qcom_icc_bcm bcm_sn0 = {
+ .name = "SN0",
+ .keepalive = true,
+ .num_nodes = 1,
+ .nodes = { &qns_gemnoc_sf },
+};
+
+static struct qcom_icc_bcm bcm_sn2 = {
+ .name = "SN2",
+ .num_nodes = 1,
+ .nodes = { &qns_gemnoc_gc },
+};
+
+static struct qcom_icc_bcm bcm_sn3 = {
+ .name = "SN3",
+ .num_nodes = 1,
+ .nodes = { &qxs_pimem },
+};
+
+static struct qcom_icc_bcm bcm_sn4 = {
+ .name = "SN4",
+ .num_nodes = 1,
+ .nodes = { &xs_qdss_stm },
+};
+
+static struct qcom_icc_bcm bcm_sn5 = {
+ .name = "SN5",
+ .num_nodes = 1,
+ .nodes = { &xm_pcie3_0 },
+};
+
+static struct qcom_icc_bcm bcm_sn6 = {
+ .name = "SN6",
+ .num_nodes = 1,
+ .nodes = { &xm_pcie3_1 },
+};
+
+static struct qcom_icc_bcm bcm_sn7 = {
+ .name = "SN7",
+ .num_nodes = 1,
+ .nodes = { &qnm_aggre1_noc },
+};
+
+static struct qcom_icc_bcm bcm_sn8 = {
+ .name = "SN8",
+ .num_nodes = 1,
+ .nodes = { &qnm_aggre2_noc },
+};
+
+static struct qcom_icc_bcm bcm_sn14 = {
+ .name = "SN14",
+ .num_nodes = 1,
+ .nodes = { &qns_pcie_mem_noc },
+};
+
+static struct qcom_icc_bcm *aggre1_noc_bcms[] = {
+ &bcm_sn5,
+ &bcm_sn6,
+ &bcm_sn14,
+};
+
+static struct qcom_icc_node *aggre1_noc_nodes[] = {
+ [MASTER_QSPI_0] = &qhm_qspi,
+ [MASTER_QUP_0] = &qhm_qup0,
+ [MASTER_QUP_1] = &qhm_qup1,
+ [MASTER_A1NOC_CFG] = &qnm_a1noc_cfg,
+ [MASTER_PCIE_0] = &xm_pcie3_0,
+ [MASTER_PCIE_1] = &xm_pcie3_1,
+ [MASTER_SDCC_1] = &xm_sdc1,
+ [MASTER_SDCC_2] = &xm_sdc2,
+ [MASTER_SDCC_4] = &xm_sdc4,
+ [MASTER_UFS_MEM] = &xm_ufs_mem,
+ [MASTER_USB2] = &xm_usb2,
+ [MASTER_USB3_0] = &xm_usb3_0,
+ [SLAVE_A1NOC_SNOC] = &qns_a1noc_snoc,
+ [SLAVE_ANOC_PCIE_GEM_NOC] = &qns_pcie_mem_noc,
+ [SLAVE_SERVICE_A1NOC] = &srvc_aggre1_noc,
+};
+
+static struct qcom_icc_desc sc7280_aggre1_noc = {
+ .nodes = aggre1_noc_nodes,
+ .num_nodes = ARRAY_SIZE(aggre1_noc_nodes),
+ .bcms = aggre1_noc_bcms,
+ .num_bcms = ARRAY_SIZE(aggre1_noc_bcms),
+};
+
+static struct qcom_icc_bcm *aggre2_noc_bcms[] = {
+ &bcm_ce0,
+};
+
+static struct qcom_icc_node *aggre2_noc_nodes[] = {
+ [MASTER_QDSS_BAM] = &qhm_qdss_bam,
+ [MASTER_A2NOC_CFG] = &qnm_a2noc_cfg,
+ [MASTER_CNOC_A2NOC] = &qnm_cnoc_datapath,
+ [MASTER_CRYPTO] = &qxm_crypto,
+ [MASTER_IPA] = &qxm_ipa,
+ [MASTER_QDSS_ETR] = &xm_qdss_etr,
+ [SLAVE_A2NOC_SNOC] = &qns_a2noc_snoc,
+ [SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc,
+};
+
+static struct qcom_icc_desc sc7280_aggre2_noc = {
+ .nodes = aggre2_noc_nodes,
+ .num_nodes = ARRAY_SIZE(aggre2_noc_nodes),
+ .bcms = aggre2_noc_bcms,
+ .num_bcms = ARRAY_SIZE(aggre2_noc_bcms),
+};
+
+static struct qcom_icc_bcm *clk_virt_bcms[] = {
+ &bcm_qup0,
+ &bcm_qup1,
+};
+
+static struct qcom_icc_node *clk_virt_nodes[] = {
+ [MASTER_QUP_CORE_0] = &qup0_core_master,
+ [MASTER_QUP_CORE_1] = &qup1_core_master,
+ [SLAVE_QUP_CORE_0] = &qup0_core_slave,
+ [SLAVE_QUP_CORE_1] = &qup1_core_slave,
+};
+
+static struct qcom_icc_desc sc7280_clk_virt = {
+ .nodes = clk_virt_nodes,
+ .num_nodes = ARRAY_SIZE(clk_virt_nodes),
+ .bcms = clk_virt_bcms,
+ .num_bcms = ARRAY_SIZE(clk_virt_bcms),
+};
+
+static struct qcom_icc_bcm *cnoc2_bcms[] = {
+ &bcm_cn1,
+ &bcm_cn2,
+};
+
+static struct qcom_icc_node *cnoc2_nodes[] = {
+ [MASTER_CNOC3_CNOC2] = &qnm_cnoc3_cnoc2,
+ [MASTER_QDSS_DAP] = &xm_qdss_dap,
+ [SLAVE_AHB2PHY_SOUTH] = &qhs_ahb2phy0,
+ [SLAVE_AHB2PHY_NORTH] = &qhs_ahb2phy1,
+ [SLAVE_CAMERA_CFG] = &qhs_camera_cfg,
+ [SLAVE_CLK_CTL] = &qhs_clk_ctl,
+ [SLAVE_CDSP_CFG] = &qhs_compute_cfg,
+ [SLAVE_RBCPR_CX_CFG] = &qhs_cpr_cx,
+ [SLAVE_RBCPR_MX_CFG] = &qhs_cpr_mx,
+ [SLAVE_CRYPTO_0_CFG] = &qhs_crypto0_cfg,
+ [SLAVE_CX_RDPM] = &qhs_cx_rdpm,
+ [SLAVE_DCC_CFG] = &qhs_dcc_cfg,
+ [SLAVE_DISPLAY_CFG] = &qhs_display_cfg,
+ [SLAVE_GFX3D_CFG] = &qhs_gpuss_cfg,
+ [SLAVE_HWKM] = &qhs_hwkm,
+ [SLAVE_IMEM_CFG] = &qhs_imem_cfg,
+ [SLAVE_IPA_CFG] = &qhs_ipa,
+ [SLAVE_IPC_ROUTER_CFG] = &qhs_ipc_router,
+ [SLAVE_LPASS] = &qhs_lpass_cfg,
+ [SLAVE_CNOC_MSS] = &qhs_mss_cfg,
+ [SLAVE_MX_RDPM] = &qhs_mx_rdpm,
+ [SLAVE_PCIE_0_CFG] = &qhs_pcie0_cfg,
+ [SLAVE_PCIE_1_CFG] = &qhs_pcie1_cfg,
+ [SLAVE_PDM] = &qhs_pdm,
+ [SLAVE_PIMEM_CFG] = &qhs_pimem_cfg,
+ [SLAVE_PKA_WRAPPER_CFG] = &qhs_pka_wrapper_cfg,
+ [SLAVE_PMU_WRAPPER_CFG] = &qhs_pmu_wrapper_cfg,
+ [SLAVE_QDSS_CFG] = &qhs_qdss_cfg,
+ [SLAVE_QSPI_0] = &qhs_qspi,
+ [SLAVE_QUP_0] = &qhs_qup0,
+ [SLAVE_QUP_1] = &qhs_qup1,
+ [SLAVE_SDCC_1] = &qhs_sdc1,
+ [SLAVE_SDCC_2] = &qhs_sdc2,
+ [SLAVE_SDCC_4] = &qhs_sdc4,
+ [SLAVE_SECURITY] = &qhs_security,
+ [SLAVE_TCSR] = &qhs_tcsr,
+ [SLAVE_TLMM] = &qhs_tlmm,
+ [SLAVE_UFS_MEM_CFG] = &qhs_ufs_mem_cfg,
+ [SLAVE_USB2] = &qhs_usb2,
+ [SLAVE_USB3_0] = &qhs_usb3_0,
+ [SLAVE_VENUS_CFG] = &qhs_venus_cfg,
+ [SLAVE_VSENSE_CTRL_CFG] = &qhs_vsense_ctrl_cfg,
+ [SLAVE_A1NOC_CFG] = &qns_a1_noc_cfg,
+ [SLAVE_A2NOC_CFG] = &qns_a2_noc_cfg,
+ [SLAVE_CNOC2_CNOC3] = &qns_cnoc2_cnoc3,
+ [SLAVE_CNOC_MNOC_CFG] = &qns_mnoc_cfg,
+ [SLAVE_SNOC_CFG] = &qns_snoc_cfg,
+};
+
+static struct qcom_icc_desc sc7280_cnoc2 = {
+ .nodes = cnoc2_nodes,
+ .num_nodes = ARRAY_SIZE(cnoc2_nodes),
+ .bcms = cnoc2_bcms,
+ .num_bcms = ARRAY_SIZE(cnoc2_bcms),
+};
+
+static struct qcom_icc_bcm *cnoc3_bcms[] = {
+ &bcm_cn0,
+ &bcm_cn1,
+ &bcm_sn3,
+ &bcm_sn4,
+};
+
+static struct qcom_icc_node *cnoc3_nodes[] = {
+ [MASTER_CNOC2_CNOC3] = &qnm_cnoc2_cnoc3,
+ [MASTER_GEM_NOC_CNOC] = &qnm_gemnoc_cnoc,
+ [MASTER_GEM_NOC_PCIE_SNOC] = &qnm_gemnoc_pcie,
+ [SLAVE_AOSS] = &qhs_aoss,
+ [SLAVE_APPSS] = &qhs_apss,
+ [SLAVE_CNOC3_CNOC2] = &qns_cnoc3_cnoc2,
+ [SLAVE_CNOC_A2NOC] = &qns_cnoc_a2noc,
+ [SLAVE_DDRSS_CFG] = &qns_ddrss_cfg,
+ [SLAVE_BOOT_IMEM] = &qxs_boot_imem,
+ [SLAVE_IMEM] = &qxs_imem,
+ [SLAVE_PIMEM] = &qxs_pimem,
+ [SLAVE_PCIE_0] = &xs_pcie_0,
+ [SLAVE_PCIE_1] = &xs_pcie_1,
+ [SLAVE_QDSS_STM] = &xs_qdss_stm,
+ [SLAVE_TCU] = &xs_sys_tcu_cfg,
+};
+
+static struct qcom_icc_desc sc7280_cnoc3 = {
+ .nodes = cnoc3_nodes,
+ .num_nodes = ARRAY_SIZE(cnoc3_nodes),
+ .bcms = cnoc3_bcms,
+ .num_bcms = ARRAY_SIZE(cnoc3_bcms),
+};
+
+static struct qcom_icc_bcm *dc_noc_bcms[] = {
+};
+
+static struct qcom_icc_node *dc_noc_nodes[] = {
+ [MASTER_CNOC_DC_NOC] = &qnm_cnoc_dc_noc,
+ [SLAVE_LLCC_CFG] = &qhs_llcc,
+ [SLAVE_GEM_NOC_CFG] = &qns_gemnoc,
+};
+
+static struct qcom_icc_desc sc7280_dc_noc = {
+ .nodes = dc_noc_nodes,
+ .num_nodes = ARRAY_SIZE(dc_noc_nodes),
+ .bcms = dc_noc_bcms,
+ .num_bcms = ARRAY_SIZE(dc_noc_bcms),
+};
+
+static struct qcom_icc_bcm *gem_noc_bcms[] = {
+ &bcm_sh0,
+ &bcm_sh2,
+ &bcm_sh3,
+ &bcm_sh4,
+};
+
+static struct qcom_icc_node *gem_noc_nodes[] = {
+ [MASTER_GPU_TCU] = &alm_gpu_tcu,
+ [MASTER_SYS_TCU] = &alm_sys_tcu,
+ [MASTER_APPSS_PROC] = &chm_apps,
+ [MASTER_COMPUTE_NOC] = &qnm_cmpnoc,
+ [MASTER_GEM_NOC_CFG] = &qnm_gemnoc_cfg,
+ [MASTER_GFX3D] = &qnm_gpu,
+ [MASTER_MNOC_HF_MEM_NOC] = &qnm_mnoc_hf,
+ [MASTER_MNOC_SF_MEM_NOC] = &qnm_mnoc_sf,
+ [MASTER_ANOC_PCIE_GEM_NOC] = &qnm_pcie,
+ [MASTER_SNOC_GC_MEM_NOC] = &qnm_snoc_gc,
+ [MASTER_SNOC_SF_MEM_NOC] = &qnm_snoc_sf,
+ [SLAVE_MSS_PROC_MS_MPU_CFG] = &qhs_mdsp_ms_mpu_cfg,
+ [SLAVE_MCDMA_MS_MPU_CFG] = &qhs_modem_ms_mpu_cfg,
+ [SLAVE_GEM_NOC_CNOC] = &qns_gem_noc_cnoc,
+ [SLAVE_LLCC] = &qns_llcc,
+ [SLAVE_MEM_NOC_PCIE_SNOC] = &qns_pcie,
+ [SLAVE_SERVICE_GEM_NOC_1] = &srvc_even_gemnoc,
+ [SLAVE_SERVICE_GEM_NOC_2] = &srvc_odd_gemnoc,
+ [SLAVE_SERVICE_GEM_NOC] = &srvc_sys_gemnoc,
+};
+
+static struct qcom_icc_desc sc7280_gem_noc = {
+ .nodes = gem_noc_nodes,
+ .num_nodes = ARRAY_SIZE(gem_noc_nodes),
+ .bcms = gem_noc_bcms,
+ .num_bcms = ARRAY_SIZE(gem_noc_bcms),
+};
+
+static struct qcom_icc_bcm *lpass_ag_noc_bcms[] = {
+};
+
+static struct qcom_icc_node *lpass_ag_noc_nodes[] = {
+ [MASTER_CNOC_LPASS_AG_NOC] = &qhm_config_noc,
+ [SLAVE_LPASS_CORE_CFG] = &qhs_lpass_core,
+ [SLAVE_LPASS_LPI_CFG] = &qhs_lpass_lpi,
+ [SLAVE_LPASS_MPU_CFG] = &qhs_lpass_mpu,
+ [SLAVE_LPASS_TOP_CFG] = &qhs_lpass_top,
+ [SLAVE_SERVICES_LPASS_AML_NOC] = &srvc_niu_aml_noc,
+ [SLAVE_SERVICE_LPASS_AG_NOC] = &srvc_niu_lpass_agnoc,
+};
+
+static struct qcom_icc_desc sc7280_lpass_ag_noc = {
+ .nodes = lpass_ag_noc_nodes,
+ .num_nodes = ARRAY_SIZE(lpass_ag_noc_nodes),
+ .bcms = lpass_ag_noc_bcms,
+ .num_bcms = ARRAY_SIZE(lpass_ag_noc_bcms),
+};
+
+static struct qcom_icc_bcm *mc_virt_bcms[] = {
+ &bcm_acv,
+ &bcm_mc0,
+};
+
+static struct qcom_icc_node *mc_virt_nodes[] = {
+ [MASTER_LLCC] = &llcc_mc,
+ [SLAVE_EBI1] = &ebi,
+};
+
+static struct qcom_icc_desc sc7280_mc_virt = {
+ .nodes = mc_virt_nodes,
+ .num_nodes = ARRAY_SIZE(mc_virt_nodes),
+ .bcms = mc_virt_bcms,
+ .num_bcms = ARRAY_SIZE(mc_virt_bcms),
+};
+
+static struct qcom_icc_bcm *mmss_noc_bcms[] = {
+ &bcm_mm0,
+ &bcm_mm1,
+ &bcm_mm4,
+ &bcm_mm5,
+};
+
+static struct qcom_icc_node *mmss_noc_nodes[] = {
+ [MASTER_CNOC_MNOC_CFG] = &qnm_mnoc_cfg,
+ [MASTER_VIDEO_P0] = &qnm_video0,
+ [MASTER_VIDEO_PROC] = &qnm_video_cpu,
+ [MASTER_CAMNOC_HF] = &qxm_camnoc_hf,
+ [MASTER_CAMNOC_ICP] = &qxm_camnoc_icp,
+ [MASTER_CAMNOC_SF] = &qxm_camnoc_sf,
+ [MASTER_MDP0] = &qxm_mdp0,
+ [SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf,
+ [SLAVE_MNOC_SF_MEM_NOC] = &qns_mem_noc_sf,
+ [SLAVE_SERVICE_MNOC] = &srvc_mnoc,
+};
+
+static struct qcom_icc_desc sc7280_mmss_noc = {
+ .nodes = mmss_noc_nodes,
+ .num_nodes = ARRAY_SIZE(mmss_noc_nodes),
+ .bcms = mmss_noc_bcms,
+ .num_bcms = ARRAY_SIZE(mmss_noc_bcms),
+};
+
+static struct qcom_icc_bcm *nsp_noc_bcms[] = {
+ &bcm_co0,
+ &bcm_co3,
+};
+
+static struct qcom_icc_node *nsp_noc_nodes[] = {
+ [MASTER_CDSP_NOC_CFG] = &qhm_nsp_noc_config,
+ [MASTER_CDSP_PROC] = &qxm_nsp,
+ [SLAVE_CDSP_MEM_NOC] = &qns_nsp_gemnoc,
+ [SLAVE_SERVICE_NSP_NOC] = &service_nsp_noc,
+};
+
+static struct qcom_icc_desc sc7280_nsp_noc = {
+ .nodes = nsp_noc_nodes,
+ .num_nodes = ARRAY_SIZE(nsp_noc_nodes),
+ .bcms = nsp_noc_bcms,
+ .num_bcms = ARRAY_SIZE(nsp_noc_bcms),
+};
+
+static struct qcom_icc_bcm *system_noc_bcms[] = {
+ &bcm_sn0,
+ &bcm_sn2,
+ &bcm_sn7,
+ &bcm_sn8,
+};
+
+static struct qcom_icc_node *system_noc_nodes[] = {
+ [MASTER_A1NOC_SNOC] = &qnm_aggre1_noc,
+ [MASTER_A2NOC_SNOC] = &qnm_aggre2_noc,
+ [MASTER_SNOC_CFG] = &qnm_snoc_cfg,
+ [MASTER_PIMEM] = &qxm_pimem,
+ [MASTER_GIC] = &xm_gic,
+ [SLAVE_SNOC_GEM_NOC_GC] = &qns_gemnoc_gc,
+ [SLAVE_SNOC_GEM_NOC_SF] = &qns_gemnoc_sf,
+ [SLAVE_SERVICE_SNOC] = &srvc_snoc,
+};
+
+static struct qcom_icc_desc sc7280_system_noc = {
+ .nodes = system_noc_nodes,
+ .num_nodes = ARRAY_SIZE(system_noc_nodes),
+ .bcms = system_noc_bcms,
+ .num_bcms = ARRAY_SIZE(system_noc_bcms),
+};
+
+static int qnoc_probe(struct platform_device *pdev)
+{
+ const struct qcom_icc_desc *desc;
+ struct icc_onecell_data *data;
+ struct icc_provider *provider;
+ struct qcom_icc_node **qnodes;
+ struct qcom_icc_provider *qp;
+ struct icc_node *node;
+ size_t num_nodes, i;
+ int ret;
+
+ desc = device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
+ qnodes = desc->nodes;
+ num_nodes = desc->num_nodes;
+
+ qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
+ if (!qp)
+ return -ENOMEM;
+
+ data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ provider = &qp->provider;
+ provider->dev = &pdev->dev;
+ provider->set = qcom_icc_set;
+ provider->pre_aggregate = qcom_icc_pre_aggregate;
+ provider->aggregate = qcom_icc_aggregate;
+ provider->xlate_extended = qcom_icc_xlate_extended;
+ INIT_LIST_HEAD(&provider->nodes);
+ provider->data = data;
+
+ qp->dev = &pdev->dev;
+ qp->bcms = desc->bcms;
+ qp->num_bcms = desc->num_bcms;
+
+ qp->voter = of_bcm_voter_get(qp->dev, NULL);
+ if (IS_ERR(qp->voter))
+ return PTR_ERR(qp->voter);
+
+ ret = icc_provider_add(provider);
+ if (ret) {
+ dev_err(&pdev->dev, "error adding interconnect provider\n");
+ return ret;
+ }
+
+ for (i = 0; i < qp->num_bcms; i++)
+ qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
+
+ for (i = 0; i < num_nodes; i++) {
+ size_t j;
+
+ if (!qnodes[i])
+ continue;
+
+ node = icc_node_create(qnodes[i]->id);
+ if (IS_ERR(node)) {
+ ret = PTR_ERR(node);
+ goto err;
+ }
+
+ node->name = qnodes[i]->name;
+ node->data = qnodes[i];
+ icc_node_add(node, provider);
+
+ for (j = 0; j < qnodes[i]->num_links; j++)
+ icc_link_create(node, qnodes[i]->links[j]);
+
+ data->nodes[i] = node;
+ }
+ data->num_nodes = num_nodes;
+
+ platform_set_drvdata(pdev, qp);
+
+ return 0;
+err:
+ icc_nodes_remove(provider);
+ icc_provider_del(provider);
+ return ret;
+}
+
+static int qnoc_remove(struct platform_device *pdev)
+{
+ struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+
+ icc_nodes_remove(&qp->provider);
+ return icc_provider_del(&qp->provider);
+}
+
+static const struct of_device_id qnoc_of_match[] = {
+ { .compatible = "qcom,sc7280-aggre1-noc",
+ .data = &sc7280_aggre1_noc},
+ { .compatible = "qcom,sc7280-aggre2-noc",
+ .data = &sc7280_aggre2_noc},
+ { .compatible = "qcom,sc7280-clk-virt",
+ .data = &sc7280_clk_virt},
+ { .compatible = "qcom,sc7280-cnoc2",
+ .data = &sc7280_cnoc2},
+ { .compatible = "qcom,sc7280-cnoc3",
+ .data = &sc7280_cnoc3},
+ { .compatible = "qcom,sc7280-dc-noc",
+ .data = &sc7280_dc_noc},
+ { .compatible = "qcom,sc7280-gem-noc",
+ .data = &sc7280_gem_noc},
+ { .compatible = "qcom,sc7280-lpass-ag-noc",
+ .data = &sc7280_lpass_ag_noc},
+ { .compatible = "qcom,sc7280-mc-virt",
+ .data = &sc7280_mc_virt},
+ { .compatible = "qcom,sc7280-mmss-noc",
+ .data = &sc7280_mmss_noc},
+ { .compatible = "qcom,sc7280-nsp-noc",
+ .data = &sc7280_nsp_noc},
+ { .compatible = "qcom,sc7280-system-noc",
+ .data = &sc7280_system_noc},
+ { }
+};
+MODULE_DEVICE_TABLE(of, qnoc_of_match);
+
+static struct platform_driver qnoc_driver = {
+ .probe = qnoc_probe,
+ .remove = qnoc_remove,
+ .driver = {
+ .name = "qnoc-sc7280",
+ .of_match_table = qnoc_of_match,
+ .sync_state = icc_sync_state,
+ },
+};
+module_platform_driver(qnoc_driver);
+
+MODULE_DESCRIPTION("SC7280 NoC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h
new file mode 100644
index 000000000000..175e400305c5
--- /dev/null
+++ b/drivers/interconnect/qcom/sc7280.h
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm #define SC7280 interconnect IDs
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SC7280_H
+#define __DRIVERS_INTERCONNECT_QCOM_SC7280_H
+
+#define SC7280_MASTER_GPU_TCU 0
+#define SC7280_MASTER_SYS_TCU 1
+#define SC7280_MASTER_APPSS_PROC 2
+#define SC7280_MASTER_LLCC 3
+#define SC7280_MASTER_CNOC_LPASS_AG_NOC 4
+#define SC7280_MASTER_CDSP_NOC_CFG 5
+#define SC7280_MASTER_QDSS_BAM 6
+#define SC7280_MASTER_QSPI_0 7
+#define SC7280_MASTER_QUP_0 8
+#define SC7280_MASTER_QUP_1 9
+#define SC7280_MASTER_A1NOC_CFG 10
+#define SC7280_MASTER_A2NOC_CFG 11
+#define SC7280_MASTER_A1NOC_SNOC 12
+#define SC7280_MASTER_A2NOC_SNOC 13
+#define SC7280_MASTER_COMPUTE_NOC 14
+#define SC7280_MASTER_CNOC2_CNOC3 15
+#define SC7280_MASTER_CNOC3_CNOC2 16
+#define SC7280_MASTER_CNOC_A2NOC 17
+#define SC7280_MASTER_CNOC_DC_NOC 18
+#define SC7280_MASTER_GEM_NOC_CFG 19
+#define SC7280_MASTER_GEM_NOC_CNOC 20
+#define SC7280_MASTER_GEM_NOC_PCIE_SNOC 21
+#define SC7280_MASTER_GFX3D 22
+#define SC7280_MASTER_CNOC_MNOC_CFG 23
+#define SC7280_MASTER_MNOC_HF_MEM_NOC 24
+#define SC7280_MASTER_MNOC_SF_MEM_NOC 25
+#define SC7280_MASTER_ANOC_PCIE_GEM_NOC 26
+#define SC7280_MASTER_SNOC_CFG 27
+#define SC7280_MASTER_SNOC_GC_MEM_NOC 28
+#define SC7280_MASTER_SNOC_SF_MEM_NOC 29
+#define SC7280_MASTER_VIDEO_P0 30
+#define SC7280_MASTER_VIDEO_PROC 31
+#define SC7280_MASTER_QUP_CORE_0 32
+#define SC7280_MASTER_QUP_CORE_1 33
+#define SC7280_MASTER_CAMNOC_HF 34
+#define SC7280_MASTER_CAMNOC_ICP 35
+#define SC7280_MASTER_CAMNOC_SF 36
+#define SC7280_MASTER_CRYPTO 37
+#define SC7280_MASTER_IPA 38
+#define SC7280_MASTER_MDP0 39
+#define SC7280_MASTER_CDSP_PROC 40
+#define SC7280_MASTER_PIMEM 41
+#define SC7280_MASTER_GIC 42
+#define SC7280_MASTER_PCIE_0 43
+#define SC7280_MASTER_PCIE_1 44
+#define SC7280_MASTER_QDSS_DAP 45
+#define SC7280_MASTER_QDSS_ETR 46
+#define SC7280_MASTER_SDCC_1 47
+#define SC7280_MASTER_SDCC_2 48
+#define SC7280_MASTER_SDCC_4 49
+#define SC7280_MASTER_UFS_MEM 50
+#define SC7280_MASTER_USB2 51
+#define SC7280_MASTER_USB3_0 52
+#define SC7280_SLAVE_EBI1 53
+#define SC7280_SLAVE_AHB2PHY_SOUTH 54
+#define SC7280_SLAVE_AHB2PHY_NORTH 55
+#define SC7280_SLAVE_AOSS 56
+#define SC7280_SLAVE_APPSS 57
+#define SC7280_SLAVE_CAMERA_CFG 58
+#define SC7280_SLAVE_CLK_CTL 59
+#define SC7280_SLAVE_CDSP_CFG 60
+#define SC7280_SLAVE_RBCPR_CX_CFG 61
+#define SC7280_SLAVE_RBCPR_MX_CFG 62
+#define SC7280_SLAVE_CRYPTO_0_CFG 63
+#define SC7280_SLAVE_CX_RDPM 64
+#define SC7280_SLAVE_DCC_CFG 65
+#define SC7280_SLAVE_DISPLAY_CFG 66
+#define SC7280_SLAVE_GFX3D_CFG 67
+#define SC7280_SLAVE_HWKM 68
+#define SC7280_SLAVE_IMEM_CFG 69
+#define SC7280_SLAVE_IPA_CFG 70
+#define SC7280_SLAVE_IPC_ROUTER_CFG 71
+#define SC7280_SLAVE_LLCC_CFG 72
+#define SC7280_SLAVE_LPASS 73
+#define SC7280_SLAVE_LPASS_CORE_CFG 74
+#define SC7280_SLAVE_LPASS_LPI_CFG 75
+#define SC7280_SLAVE_LPASS_MPU_CFG 76
+#define SC7280_SLAVE_LPASS_TOP_CFG 77
+#define SC7280_SLAVE_MSS_PROC_MS_MPU_CFG 78
+#define SC7280_SLAVE_MCDMA_MS_MPU_CFG 79
+#define SC7280_SLAVE_CNOC_MSS 80
+#define SC7280_SLAVE_MX_RDPM 81
+#define SC7280_SLAVE_PCIE_0_CFG 82
+#define SC7280_SLAVE_PCIE_1_CFG 83
+#define SC7280_SLAVE_PDM 84
+#define SC7280_SLAVE_PIMEM_CFG 85
+#define SC7280_SLAVE_PKA_WRAPPER_CFG 86
+#define SC7280_SLAVE_PMU_WRAPPER_CFG 87
+#define SC7280_SLAVE_QDSS_CFG 88
+#define SC7280_SLAVE_QSPI_0 89
+#define SC7280_SLAVE_QUP_0 90
+#define SC7280_SLAVE_QUP_1 91
+#define SC7280_SLAVE_SDCC_1 92
+#define SC7280_SLAVE_SDCC_2 93
+#define SC7280_SLAVE_SDCC_4 94
+#define SC7280_SLAVE_SECURITY 95
+#define SC7280_SLAVE_TCSR 96
+#define SC7280_SLAVE_TLMM 97
+#define SC7280_SLAVE_UFS_MEM_CFG 98
+#define SC7280_SLAVE_USB2 99
+#define SC7280_SLAVE_USB3_0 100
+#define SC7280_SLAVE_VENUS_CFG 101
+#define SC7280_SLAVE_VSENSE_CTRL_CFG 102
+#define SC7280_SLAVE_A1NOC_CFG 103
+#define SC7280_SLAVE_A1NOC_SNOC 104
+#define SC7280_SLAVE_A2NOC_CFG 105
+#define SC7280_SLAVE_A2NOC_SNOC 106
+#define SC7280_SLAVE_CNOC2_CNOC3 107
+#define SC7280_SLAVE_CNOC3_CNOC2 108
+#define SC7280_SLAVE_CNOC_A2NOC 109
+#define SC7280_SLAVE_DDRSS_CFG 110
+#define SC7280_SLAVE_GEM_NOC_CNOC 111
+#define SC7280_SLAVE_GEM_NOC_CFG 112
+#define SC7280_SLAVE_SNOC_GEM_NOC_GC 113
+#define SC7280_SLAVE_SNOC_GEM_NOC_SF 114
+#define SC7280_SLAVE_LLCC 115
+#define SC7280_SLAVE_MNOC_HF_MEM_NOC 116
+#define SC7280_SLAVE_MNOC_SF_MEM_NOC 117
+#define SC7280_SLAVE_CNOC_MNOC_CFG 118
+#define SC7280_SLAVE_CDSP_MEM_NOC 119
+#define SC7280_SLAVE_MEM_NOC_PCIE_SNOC 120
+#define SC7280_SLAVE_ANOC_PCIE_GEM_NOC 121
+#define SC7280_SLAVE_SNOC_CFG 122
+#define SC7280_SLAVE_QUP_CORE_0 123
+#define SC7280_SLAVE_QUP_CORE_1 124
+#define SC7280_SLAVE_BOOT_IMEM 125
+#define SC7280_SLAVE_IMEM 126
+#define SC7280_SLAVE_PIMEM 127
+#define SC7280_SLAVE_SERVICE_NSP_NOC 128
+#define SC7280_SLAVE_SERVICE_A1NOC 129
+#define SC7280_SLAVE_SERVICE_A2NOC 130
+#define SC7280_SLAVE_SERVICE_GEM_NOC_1 131
+#define SC7280_SLAVE_SERVICE_MNOC 132
+#define SC7280_SLAVE_SERVICES_LPASS_AML_NOC 133
+#define SC7280_SLAVE_SERVICE_LPASS_AG_NOC 134
+#define SC7280_SLAVE_SERVICE_GEM_NOC_2 135
+#define SC7280_SLAVE_SERVICE_SNOC 136
+#define SC7280_SLAVE_SERVICE_GEM_NOC 137
+#define SC7280_SLAVE_PCIE_0 138
+#define SC7280_SLAVE_PCIE_1 139
+#define SC7280_SLAVE_QDSS_STM 140
+#define SC7280_SLAVE_TCU 141
+
+#endif
diff --git a/drivers/ipack/carriers/tpci200.c b/drivers/ipack/carriers/tpci200.c
index ec71063fff76..3461b0a7dc62 100644
--- a/drivers/ipack/carriers/tpci200.c
+++ b/drivers/ipack/carriers/tpci200.c
@@ -1,7 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
- * tpci200.c
- *
+/*
* driver for the TEWS TPCI-200 device
*
* Copyright (C) 2009-2012 CERN (www.cern.ch)
@@ -596,8 +594,11 @@ static int tpci200_pci_probe(struct pci_dev *pdev,
out_err_bus_register:
tpci200_uninstall(tpci200);
+ /* tpci200->info->cfg_regs is unmapped in tpci200_uninstall */
+ tpci200->info->cfg_regs = NULL;
out_err_install:
- iounmap(tpci200->info->cfg_regs);
+ if (tpci200->info->cfg_regs)
+ iounmap(tpci200->info->cfg_regs);
out_err_ioremap:
pci_release_region(pdev, TPCI200_CFG_MEM_BAR);
out_err_pci_request:
diff --git a/drivers/ipack/carriers/tpci200.h b/drivers/ipack/carriers/tpci200.h
index 2619f827e33f..e79ac64abcff 100644
--- a/drivers/ipack/carriers/tpci200.h
+++ b/drivers/ipack/carriers/tpci200.h
@@ -1,7 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
- * tpci200.h
- *
+/*
* driver for the carrier TEWS TPCI-200
*
* Copyright (C) 2009-2012 CERN (www.cern.ch)
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c
index 3940714e4397..2a3a94f72dfb 100644
--- a/drivers/ipack/devices/ipoctal.c
+++ b/drivers/ipack/devices/ipoctal.c
@@ -1,7 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
- * ipoctal.c
- *
+/*
* driver for the GE IP-OCTAL boards
*
* Copyright (C) 2009-2012 CERN (www.cern.ch)
diff --git a/drivers/ipack/devices/ipoctal.h b/drivers/ipack/devices/ipoctal.h
index 75f83ba774a4..773dc41bd667 100644
--- a/drivers/ipack/devices/ipoctal.h
+++ b/drivers/ipack/devices/ipoctal.h
@@ -1,9 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
- * ipoctal.h
- *
+/*
* driver for the IPOCTAL boards
-
+ *
* Copyright (C) 2009-2012 CERN (www.cern.ch)
* Author: Nicolas Serafini, EIC2 SA
* Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
diff --git a/drivers/mcb/mcb-lpc.c b/drivers/mcb/mcb-lpc.c
index 506676754538..53decd89876e 100644
--- a/drivers/mcb/mcb-lpc.c
+++ b/drivers/mcb/mcb-lpc.c
@@ -105,17 +105,8 @@ out_put:
return ret;
}
-static struct resource sc24_fpga_resource = {
- .start = 0xe000e000,
- .end = 0xe000e000 + CHAM_HEADER_SIZE,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource sc31_fpga_resource = {
- .start = 0xf000e000,
- .end = 0xf000e000 + CHAM_HEADER_SIZE,
- .flags = IORESOURCE_MEM,
-};
+static struct resource sc24_fpga_resource = DEFINE_RES_MEM(0xe000e000, CHAM_HEADER_SIZE);
+static struct resource sc31_fpga_resource = DEFINE_RES_MEM(0xf000e000, CHAM_HEADER_SIZE);
static struct platform_driver mcb_lpc_driver = {
.driver = {
diff --git a/drivers/misc/bcm-vk/bcm_vk_msg.c b/drivers/misc/bcm-vk/bcm_vk_msg.c
index f40cf08a6192..066b9ef7fcd7 100644
--- a/drivers/misc/bcm-vk/bcm_vk_msg.c
+++ b/drivers/misc/bcm-vk/bcm_vk_msg.c
@@ -354,8 +354,7 @@ static void bcm_vk_drain_all_pend(struct device *dev,
for (num = 0; num < chan->q_nr; num++) {
list_for_each_entry_safe(entry, tmp, &chan->pendq[num], node) {
if ((!ctx) || (entry->ctx->idx == ctx->idx)) {
- list_del(&entry->node);
- list_add_tail(&entry->node, &del_q);
+ list_move_tail(&entry->node, &del_q);
}
}
}
@@ -701,8 +700,7 @@ int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type,
return -EINVAL;
}
- entry = kzalloc(sizeof(*entry) +
- sizeof(struct vk_msg_blk), GFP_KERNEL);
+ entry = kzalloc(struct_size(entry, to_v_msg, 1), GFP_KERNEL);
if (!entry)
return -ENOMEM;
diff --git a/drivers/misc/bcm-vk/bcm_vk_msg.h b/drivers/misc/bcm-vk/bcm_vk_msg.h
index 4eaad84825d6..56784c8896d8 100644
--- a/drivers/misc/bcm-vk/bcm_vk_msg.h
+++ b/drivers/misc/bcm-vk/bcm_vk_msg.h
@@ -116,7 +116,7 @@ struct bcm_vk_wkent {
u32 usr_msg_id;
u32 to_v_blks;
u32 seq_num;
- struct vk_msg_blk to_v_msg[0];
+ struct vk_msg_blk to_v_msg[];
};
/* queue stats counters */
diff --git a/drivers/misc/cardreader/alcor_pci.c b/drivers/misc/cardreader/alcor_pci.c
index cd402c89189e..de6d44a158bb 100644
--- a/drivers/misc/cardreader/alcor_pci.c
+++ b/drivers/misc/cardreader/alcor_pci.c
@@ -139,7 +139,13 @@ static void alcor_pci_init_check_aspm(struct alcor_pci_priv *priv)
u32 val32;
priv->pdev_cap_off = alcor_pci_find_cap_offset(priv, priv->pdev);
- priv->parent_cap_off = alcor_pci_find_cap_offset(priv,
+ /*
+ * A device might be attached to root complex directly and
+ * priv->parent_pdev will be NULL. In this case we don't check its
+ * capability and disable ASPM completely.
+ */
+ if (priv->parent_pdev)
+ priv->parent_cap_off = alcor_pci_find_cap_offset(priv,
priv->parent_pdev);
if ((priv->pdev_cap_off == 0) || (priv->parent_cap_off == 0)) {
diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c
index bd3bd32333c5..3dbdce96fae0 100644
--- a/drivers/misc/cxl/file.c
+++ b/drivers/misc/cxl/file.c
@@ -569,7 +569,8 @@ static int cxl_add_chardev(struct cxl_afu *afu, dev_t devt, struct cdev *cdev,
int rc;
cdev_init(cdev, fops);
- if ((rc = cdev_add(cdev, devt, 1))) {
+ rc = cdev_add(cdev, devt, 1);
+ if (rc) {
dev_err(&afu->dev, "Unable to add %s chardev: %i\n", desc, rc);
return rc;
}
@@ -577,8 +578,8 @@ static int cxl_add_chardev(struct cxl_afu *afu, dev_t devt, struct cdev *cdev,
dev = device_create(cxl_class, &afu->dev, devt, afu,
"afu%i.%i%s", afu->adapter->adapter_num, afu->slice, postfix);
if (IS_ERR(dev)) {
- dev_err(&afu->dev, "Unable to create %s chardev in sysfs: %i\n", desc, rc);
rc = PTR_ERR(dev);
+ dev_err(&afu->dev, "Unable to create %s chardev in sysfs: %i\n", desc, rc);
goto err;
}
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 0f791bfdc1f5..f0a7531f354c 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -32,12 +32,13 @@ config EEPROM_AT24
will be called at24.
config EEPROM_AT25
- tristate "SPI EEPROMs from most vendors"
+ tristate "SPI EEPROMs (FRAMs) from most vendors"
depends on SPI && SYSFS
select NVMEM
select NVMEM_SYSFS
help
- Enable this driver to get read/write support to most SPI EEPROMs,
+ Enable this driver to get read/write support to most SPI EEPROMs
+ and Cypress FRAMs,
after you configure the board init code to know about each eeprom
on your target board.
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index b76e4901b4a4..4d09b672ac3c 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at25.c -- support most SPI EEPROMs, such as Atmel AT25 models
+ * and Cypress FRAMs FM25 models
*
* Copyright (C) 2006 David Brownell
*/
@@ -16,6 +17,9 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/property.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/math.h>
/*
* NOTE: this is an *EEPROM* driver. The vagaries of product naming
@@ -27,6 +31,7 @@
* AT25M02, AT25128B
*/
+#define FM25_SN_LEN 8 /* serial number length */
struct at25_data {
struct spi_device *spi;
struct mutex lock;
@@ -34,6 +39,7 @@ struct at25_data {
unsigned addrlen;
struct nvmem_config nvmem_config;
struct nvmem_device *nvmem;
+ u8 sernum[FM25_SN_LEN];
};
#define AT25_WREN 0x06 /* latch the write enable */
@@ -42,6 +48,9 @@ struct at25_data {
#define AT25_WRSR 0x01 /* write status register */
#define AT25_READ 0x03 /* read byte(s) */
#define AT25_WRITE 0x02 /* write byte(s)/sector */
+#define FM25_SLEEP 0xb9 /* enter sleep mode */
+#define FM25_RDID 0x9f /* read device ID */
+#define FM25_RDSN 0xc3 /* read S/N */
#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */
#define AT25_SR_WEN 0x02 /* write enable (latched) */
@@ -51,6 +60,8 @@ struct at25_data {
#define AT25_INSTR_BIT3 0x08 /* Additional address bit in instr */
+#define FM25_ID_LEN 9 /* ID length */
+
#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */
/* Specs often allow 5 msec for a page write, sometimes 20 msec;
@@ -129,6 +140,51 @@ static int at25_ee_read(void *priv, unsigned int offset,
return status;
}
+/*
+ * read extra registers as ID or serial number
+ */
+static int fm25_aux_read(struct at25_data *at25, u8 *buf, uint8_t command,
+ int len)
+{
+ int status;
+ struct spi_transfer t[2];
+ struct spi_message m;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &command;
+ t[0].len = 1;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&at25->lock);
+
+ status = spi_sync(at25->spi, &m);
+ dev_dbg(&at25->spi->dev, "read %d aux bytes --> %d\n", len, status);
+
+ mutex_unlock(&at25->lock);
+ return status;
+}
+
+static ssize_t sernum_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct at25_data *at25;
+
+ at25 = dev_get_drvdata(dev);
+ return sysfs_emit(buf, "%*ph\n", (int)sizeof(at25->sernum), at25->sernum);
+}
+static DEVICE_ATTR_RO(sernum);
+
+static struct attribute *sernum_attrs[] = {
+ &dev_attr_sernum.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(sernum);
+
static int at25_ee_write(void *priv, unsigned int off, void *val, size_t count)
{
struct at25_data *at25 = priv;
@@ -303,34 +359,39 @@ static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
return 0;
}
+static const struct of_device_id at25_of_match[] = {
+ { .compatible = "atmel,at25",},
+ { .compatible = "cypress,fm25",},
+ { }
+};
+MODULE_DEVICE_TABLE(of, at25_of_match);
+
static int at25_probe(struct spi_device *spi)
{
struct at25_data *at25 = NULL;
struct spi_eeprom chip;
int err;
int sr;
- int addrlen;
+ u8 id[FM25_ID_LEN];
+ u8 sernum[FM25_SN_LEN];
+ int i;
+ const struct of_device_id *match;
+ bool is_fram = 0;
+
+ match = of_match_device(of_match_ptr(at25_of_match), &spi->dev);
+ if (match && !strcmp(match->compatible, "cypress,fm25"))
+ is_fram = 1;
/* Chip description */
if (!spi->dev.platform_data) {
- err = at25_fw_to_chip(&spi->dev, &chip);
- if (err)
- return err;
+ if (!is_fram) {
+ err = at25_fw_to_chip(&spi->dev, &chip);
+ if (err)
+ return err;
+ }
} else
chip = *(struct spi_eeprom *)spi->dev.platform_data;
- /* For now we only support 8/16/24 bit addressing */
- if (chip.flags & EE_ADDR1)
- addrlen = 1;
- else if (chip.flags & EE_ADDR2)
- addrlen = 2;
- else if (chip.flags & EE_ADDR3)
- addrlen = 3;
- else {
- dev_dbg(&spi->dev, "unsupported address type\n");
- return -EINVAL;
- }
-
/* Ping the chip ... the status register is pretty portable,
* unlike probing manufacturer IDs. We do expect that system
* firmware didn't write it in the past few milliseconds!
@@ -349,9 +410,51 @@ static int at25_probe(struct spi_device *spi)
at25->chip = chip;
at25->spi = spi;
spi_set_drvdata(spi, at25);
- at25->addrlen = addrlen;
- at25->nvmem_config.type = NVMEM_TYPE_EEPROM;
+ if (is_fram) {
+ /* Get ID of chip */
+ fm25_aux_read(at25, id, FM25_RDID, FM25_ID_LEN);
+ if (id[6] != 0xc2) {
+ dev_err(&spi->dev,
+ "Error: no Cypress FRAM (id %02x)\n", id[6]);
+ return -ENODEV;
+ }
+ /* set size found in ID */
+ if (id[7] < 0x21 || id[7] > 0x26) {
+ dev_err(&spi->dev, "Error: unsupported size (id %02x)\n", id[7]);
+ return -ENODEV;
+ }
+ chip.byte_len = int_pow(2, id[7] - 0x21 + 4) * 1024;
+
+ if (at25->chip.byte_len > 64 * 1024)
+ at25->chip.flags |= EE_ADDR3;
+ else
+ at25->chip.flags |= EE_ADDR2;
+
+ if (id[8]) {
+ fm25_aux_read(at25, sernum, FM25_RDSN, FM25_SN_LEN);
+ /* swap byte order */
+ for (i = 0; i < FM25_SN_LEN; i++)
+ at25->sernum[i] = sernum[FM25_SN_LEN - 1 - i];
+ }
+
+ at25->chip.page_size = PAGE_SIZE;
+ strncpy(at25->chip.name, "fm25", sizeof(at25->chip.name));
+ }
+
+ /* For now we only support 8/16/24 bit addressing */
+ if (at25->chip.flags & EE_ADDR1)
+ at25->addrlen = 1;
+ else if (at25->chip.flags & EE_ADDR2)
+ at25->addrlen = 2;
+ else if (at25->chip.flags & EE_ADDR3)
+ at25->addrlen = 3;
+ else {
+ dev_dbg(&spi->dev, "unsupported address type\n");
+ return -EINVAL;
+ }
+
+ at25->nvmem_config.type = is_fram ? NVMEM_TYPE_FRAM : NVMEM_TYPE_EEPROM;
at25->nvmem_config.name = dev_name(&spi->dev);
at25->nvmem_config.dev = &spi->dev;
at25->nvmem_config.read_only = chip.flags & EE_READONLY;
@@ -370,27 +473,22 @@ static int at25_probe(struct spi_device *spi)
if (IS_ERR(at25->nvmem))
return PTR_ERR(at25->nvmem);
- dev_info(&spi->dev, "%d %s %s eeprom%s, pagesize %u\n",
- (chip.byte_len < 1024) ? chip.byte_len : (chip.byte_len / 1024),
- (chip.byte_len < 1024) ? "Byte" : "KByte",
- at25->chip.name,
- (chip.flags & EE_READONLY) ? " (readonly)" : "",
- at25->chip.page_size);
+ dev_info(&spi->dev, "%d %s %s %s%s, pagesize %u\n",
+ (chip.byte_len < 1024) ? chip.byte_len : (chip.byte_len / 1024),
+ (chip.byte_len < 1024) ? "Byte" : "KByte",
+ at25->chip.name, is_fram ? "fram" : "eeprom",
+ (chip.flags & EE_READONLY) ? " (readonly)" : "",
+ at25->chip.page_size);
return 0;
}
/*-------------------------------------------------------------------------*/
-static const struct of_device_id at25_of_match[] = {
- { .compatible = "atmel,at25", },
- { }
-};
-MODULE_DEVICE_TABLE(of, at25_of_match);
-
static struct spi_driver at25_driver = {
.driver = {
.name = "at25",
.of_match_table = at25_of_match,
+ .dev_groups = sernum_groups,
},
.probe = at25_probe,
};
diff --git a/drivers/misc/eeprom/ee1004.c b/drivers/misc/eeprom/ee1004.c
index 252e15ba65e1..bb9c4512c968 100644
--- a/drivers/misc/eeprom/ee1004.c
+++ b/drivers/misc/eeprom/ee1004.c
@@ -32,16 +32,17 @@
*/
#define EE1004_ADDR_SET_PAGE 0x36
-#define EE1004_EEPROM_SIZE 512
+#define EE1004_NUM_PAGES 2
#define EE1004_PAGE_SIZE 256
#define EE1004_PAGE_SHIFT 8
+#define EE1004_EEPROM_SIZE (EE1004_PAGE_SIZE * EE1004_NUM_PAGES)
/*
* Mutex protects ee1004_set_page and ee1004_dev_count, and must be held
* from page selection to end of read.
*/
static DEFINE_MUTEX(ee1004_bus_lock);
-static struct i2c_client *ee1004_set_page[2];
+static struct i2c_client *ee1004_set_page[EE1004_NUM_PAGES];
static unsigned int ee1004_dev_count;
static int ee1004_current_page;
@@ -71,40 +72,58 @@ static int ee1004_get_current_page(void)
return 0;
}
+static int ee1004_set_current_page(struct device *dev, int page)
+{
+ int ret;
+
+ if (page == ee1004_current_page)
+ return 0;
+
+ /* Data is ignored */
+ ret = i2c_smbus_write_byte(ee1004_set_page[page], 0x00);
+ /*
+ * Don't give up just yet. Some memory modules will select the page
+ * but not ack the command. Check which page is selected now.
+ */
+ if (ret == -ENXIO && ee1004_get_current_page() == page)
+ ret = 0;
+ if (ret < 0) {
+ dev_err(dev, "Failed to select page %d (%d)\n", page, ret);
+ return ret;
+ }
+
+ dev_dbg(dev, "Selected page %d\n", page);
+ ee1004_current_page = page;
+
+ return 0;
+}
+
static ssize_t ee1004_eeprom_read(struct i2c_client *client, char *buf,
unsigned int offset, size_t count)
{
- int status;
+ int status, page;
+
+ page = offset >> EE1004_PAGE_SHIFT;
+ offset &= (1 << EE1004_PAGE_SHIFT) - 1;
+
+ status = ee1004_set_current_page(&client->dev, page);
+ if (status)
+ return status;
- if (count > I2C_SMBUS_BLOCK_MAX)
- count = I2C_SMBUS_BLOCK_MAX;
/* Can't cross page boundaries */
- if (unlikely(offset + count > EE1004_PAGE_SIZE))
+ if (offset + count > EE1004_PAGE_SIZE)
count = EE1004_PAGE_SIZE - offset;
- status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset,
- count, buf);
- dev_dbg(&client->dev, "read %zu@%d --> %d\n", count, offset, status);
-
- return status;
+ return i2c_smbus_read_i2c_block_data_or_emulated(client, offset, count, buf);
}
-static ssize_t ee1004_read(struct file *filp, struct kobject *kobj,
+static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
- struct device *dev = kobj_to_dev(kobj);
- struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_client *client = kobj_to_i2c_client(kobj);
size_t requested = count;
- int page;
-
- if (unlikely(!count))
- return count;
-
- page = off >> EE1004_PAGE_SHIFT;
- if (unlikely(page > 1))
- return 0;
- off &= (1 << EE1004_PAGE_SHIFT) - 1;
+ int ret = 0;
/*
* Read data from chip, protecting against concurrent access to
@@ -113,139 +132,85 @@ static ssize_t ee1004_read(struct file *filp, struct kobject *kobj,
mutex_lock(&ee1004_bus_lock);
while (count) {
- int status;
-
- /* Select page */
- if (page != ee1004_current_page) {
- /* Data is ignored */
- status = i2c_smbus_write_byte(ee1004_set_page[page],
- 0x00);
- if (status == -ENXIO) {
- /*
- * Don't give up just yet. Some memory
- * modules will select the page but not
- * ack the command. Check which page is
- * selected now.
- */
- if (ee1004_get_current_page() == page)
- status = 0;
- }
- if (status < 0) {
- dev_err(dev, "Failed to select page %d (%d)\n",
- page, status);
- mutex_unlock(&ee1004_bus_lock);
- return status;
- }
- dev_dbg(dev, "Selected page %d\n", page);
- ee1004_current_page = page;
- }
-
- status = ee1004_eeprom_read(client, buf, off, count);
- if (status < 0) {
- mutex_unlock(&ee1004_bus_lock);
- return status;
- }
- buf += status;
- off += status;
- count -= status;
+ ret = ee1004_eeprom_read(client, buf, off, count);
+ if (ret < 0)
+ goto out;
- if (off == EE1004_PAGE_SIZE) {
- page++;
- off = 0;
- }
+ buf += ret;
+ off += ret;
+ count -= ret;
}
-
+out:
mutex_unlock(&ee1004_bus_lock);
- return requested;
+ return ret < 0 ? ret : requested;
}
-static const struct bin_attribute eeprom_attr = {
- .attr = {
- .name = "eeprom",
- .mode = 0444,
- },
- .size = EE1004_EEPROM_SIZE,
- .read = ee1004_read,
+static BIN_ATTR_RO(eeprom, EE1004_EEPROM_SIZE);
+
+static struct bin_attribute *ee1004_attrs[] = {
+ &bin_attr_eeprom,
+ NULL
};
-static int ee1004_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+BIN_ATTRIBUTE_GROUPS(ee1004);
+
+static void ee1004_cleanup(int idx)
+{
+ if (--ee1004_dev_count == 0)
+ while (--idx >= 0) {
+ i2c_unregister_device(ee1004_set_page[idx]);
+ ee1004_set_page[idx] = NULL;
+ }
+}
+
+static int ee1004_probe(struct i2c_client *client)
{
int err, cnr = 0;
- const char *slow = NULL;
/* Make sure we can operate on this adapter */
if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_BYTE |
- I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- if (i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_BYTE |
- I2C_FUNC_SMBUS_READ_WORD_DATA))
- slow = "word";
- else if (i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_BYTE |
- I2C_FUNC_SMBUS_READ_BYTE_DATA))
- slow = "byte";
- else
- return -EPFNOSUPPORT;
- }
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_I2C_BLOCK) &&
+ !i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ return -EPFNOSUPPORT;
/* Use 2 dummy devices for page select command */
mutex_lock(&ee1004_bus_lock);
if (++ee1004_dev_count == 1) {
- for (cnr = 0; cnr < 2; cnr++) {
- ee1004_set_page[cnr] = i2c_new_dummy_device(client->adapter,
- EE1004_ADDR_SET_PAGE + cnr);
- if (IS_ERR(ee1004_set_page[cnr])) {
- dev_err(&client->dev,
- "address 0x%02x unavailable\n",
- EE1004_ADDR_SET_PAGE + cnr);
- err = PTR_ERR(ee1004_set_page[cnr]);
+ for (cnr = 0; cnr < EE1004_NUM_PAGES; cnr++) {
+ struct i2c_client *cl;
+
+ cl = i2c_new_dummy_device(client->adapter, EE1004_ADDR_SET_PAGE + cnr);
+ if (IS_ERR(cl)) {
+ err = PTR_ERR(cl);
goto err_clients;
}
+ ee1004_set_page[cnr] = cl;
}
- } else if (i2c_adapter_id(client->adapter) !=
- i2c_adapter_id(ee1004_set_page[0]->adapter)) {
+
+ /* Remember current page to avoid unneeded page select */
+ err = ee1004_get_current_page();
+ if (err < 0)
+ goto err_clients;
+ dev_dbg(&client->dev, "Currently selected page: %d\n", err);
+ ee1004_current_page = err;
+ } else if (client->adapter != ee1004_set_page[0]->adapter) {
dev_err(&client->dev,
"Driver only supports devices on a single I2C bus\n");
err = -EOPNOTSUPP;
goto err_clients;
}
-
- /* Remember current page to avoid unneeded page select */
- err = ee1004_get_current_page();
- if (err < 0)
- goto err_clients;
- ee1004_current_page = err;
- dev_dbg(&client->dev, "Currently selected page: %d\n",
- ee1004_current_page);
mutex_unlock(&ee1004_bus_lock);
- /* Create the sysfs eeprom file */
- err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
- if (err)
- goto err_clients_lock;
-
dev_info(&client->dev,
"%u byte EE1004-compliant SPD EEPROM, read-only\n",
EE1004_EEPROM_SIZE);
- if (slow)
- dev_notice(&client->dev,
- "Falling back to %s reads, performance will suffer\n",
- slow);
return 0;
- err_clients_lock:
- mutex_lock(&ee1004_bus_lock);
err_clients:
- if (--ee1004_dev_count == 0) {
- for (cnr--; cnr >= 0; cnr--) {
- i2c_unregister_device(ee1004_set_page[cnr]);
- ee1004_set_page[cnr] = NULL;
- }
- }
+ ee1004_cleanup(cnr);
mutex_unlock(&ee1004_bus_lock);
return err;
@@ -253,18 +218,9 @@ static int ee1004_probe(struct i2c_client *client,
static int ee1004_remove(struct i2c_client *client)
{
- int i;
-
- sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
-
/* Remove page select clients if this is the last device */
mutex_lock(&ee1004_bus_lock);
- if (--ee1004_dev_count == 0) {
- for (i = 0; i < 2; i++) {
- i2c_unregister_device(ee1004_set_page[i]);
- ee1004_set_page[i] = NULL;
- }
- }
+ ee1004_cleanup(EE1004_NUM_PAGES);
mutex_unlock(&ee1004_bus_lock);
return 0;
@@ -275,8 +231,9 @@ static int ee1004_remove(struct i2c_client *client)
static struct i2c_driver ee1004_driver = {
.driver = {
.name = "ee1004",
+ .dev_groups = ee1004_groups,
},
- .probe = ee1004_probe,
+ .probe_new = ee1004_probe,
.remove = ee1004_remove,
.id_table = ee1004_ids,
};
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 80114f4c80ad..29d8971ec558 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
+#include <linux/log2.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
@@ -28,14 +29,29 @@
struct eeprom_93xx46_devtype_data {
unsigned int quirks;
+ unsigned char flags;
+};
+
+static const struct eeprom_93xx46_devtype_data at93c46_data = {
+ .flags = EE_SIZE1K,
+};
+
+static const struct eeprom_93xx46_devtype_data at93c56_data = {
+ .flags = EE_SIZE2K,
+};
+
+static const struct eeprom_93xx46_devtype_data at93c66_data = {
+ .flags = EE_SIZE4K,
};
static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
+ .flags = EE_SIZE1K,
.quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ |
EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
};
static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = {
+ .flags = EE_SIZE1K,
.quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE,
};
@@ -70,6 +86,7 @@ static int eeprom_93xx46_read(void *priv, unsigned int off,
struct eeprom_93xx46_dev *edev = priv;
char *buf = val;
int err = 0;
+ int bits;
if (unlikely(off >= edev->size))
return 0;
@@ -83,21 +100,21 @@ static int eeprom_93xx46_read(void *priv, unsigned int off,
if (edev->pdata->prepare)
edev->pdata->prepare(edev);
+ /* The opcode in front of the address is three bits. */
+ bits = edev->addrlen + 3;
+
while (count) {
struct spi_message m;
struct spi_transfer t[2] = { { 0 } };
u16 cmd_addr = OP_READ << edev->addrlen;
size_t nbytes = count;
- int bits;
- if (edev->addrlen == 7) {
- cmd_addr |= off & 0x7f;
- bits = 10;
+ if (edev->pdata->flags & EE_ADDR8) {
+ cmd_addr |= off;
if (has_quirk_single_word_read(edev))
nbytes = 1;
} else {
- cmd_addr |= (off >> 1) & 0x3f;
- bits = 9;
+ cmd_addr |= (off >> 1);
if (has_quirk_single_word_read(edev))
nbytes = 2;
}
@@ -152,14 +169,14 @@ static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
int bits, ret;
u16 cmd_addr;
+ /* The opcode in front of the address is three bits. */
+ bits = edev->addrlen + 3;
+
cmd_addr = OP_START << edev->addrlen;
- if (edev->addrlen == 7) {
+ if (edev->pdata->flags & EE_ADDR8)
cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1;
- bits = 10;
- } else {
+ else
cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS);
- bits = 9;
- }
if (has_quirk_instruction_length(edev)) {
cmd_addr <<= 2;
@@ -205,15 +222,19 @@ eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
int bits, data_len, ret;
u16 cmd_addr;
+ if (unlikely(off >= edev->size))
+ return -EINVAL;
+
+ /* The opcode in front of the address is three bits. */
+ bits = edev->addrlen + 3;
+
cmd_addr = OP_WRITE << edev->addrlen;
- if (edev->addrlen == 7) {
- cmd_addr |= off & 0x7f;
- bits = 10;
+ if (edev->pdata->flags & EE_ADDR8) {
+ cmd_addr |= off;
data_len = 1;
} else {
- cmd_addr |= (off >> 1) & 0x3f;
- bits = 9;
+ cmd_addr |= (off >> 1);
data_len = 2;
}
@@ -253,7 +274,7 @@ static int eeprom_93xx46_write(void *priv, unsigned int off,
return count;
/* only write even number of bytes on 16-bit devices */
- if (edev->addrlen == 6) {
+ if (edev->pdata->flags & EE_ADDR16) {
step = 2;
count &= ~1;
}
@@ -295,14 +316,14 @@ static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
int bits, ret;
u16 cmd_addr;
+ /* The opcode in front of the address is three bits. */
+ bits = edev->addrlen + 3;
+
cmd_addr = OP_START << edev->addrlen;
- if (edev->addrlen == 7) {
+ if (edev->pdata->flags & EE_ADDR8)
cmd_addr |= ADDR_ERAL << 1;
- bits = 10;
- } else {
+ else
cmd_addr |= ADDR_ERAL;
- bits = 9;
- }
if (has_quirk_instruction_length(edev)) {
cmd_addr <<= 2;
@@ -375,8 +396,11 @@ static void select_deassert(void *context)
}
static const struct of_device_id eeprom_93xx46_of_table[] = {
- { .compatible = "eeprom-93xx46", },
+ { .compatible = "eeprom-93xx46", .data = &at93c46_data, },
+ { .compatible = "atmel,at93c46", .data = &at93c46_data, },
{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
+ { .compatible = "atmel,at93c56", .data = &at93c56_data, },
+ { .compatible = "atmel,at93c66", .data = &at93c66_data, },
{ .compatible = "microchip,93lc46b", .data = &microchip_93lc46b_data, },
{}
};
@@ -426,6 +450,7 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi)
const struct eeprom_93xx46_devtype_data *data = of_id->data;
pd->quirks = data->quirks;
+ pd->flags |= data->flags;
}
spi->dev.platform_data = pd;
@@ -455,10 +480,21 @@ static int eeprom_93xx46_probe(struct spi_device *spi)
if (!edev)
return -ENOMEM;
+ if (pd->flags & EE_SIZE1K)
+ edev->size = 128;
+ else if (pd->flags & EE_SIZE2K)
+ edev->size = 256;
+ else if (pd->flags & EE_SIZE4K)
+ edev->size = 512;
+ else {
+ dev_err(&spi->dev, "unspecified size\n");
+ return -EINVAL;
+ }
+
if (pd->flags & EE_ADDR8)
- edev->addrlen = 7;
+ edev->addrlen = ilog2(edev->size);
else if (pd->flags & EE_ADDR16)
- edev->addrlen = 6;
+ edev->addrlen = ilog2(edev->size) - 1;
else {
dev_err(&spi->dev, "unspecified address type\n");
return -EINVAL;
@@ -469,7 +505,6 @@ static int eeprom_93xx46_probe(struct spi_device *spi)
edev->spi = spi;
edev->pdata = pd;
- edev->size = 128;
edev->nvmem_config.type = NVMEM_TYPE_EEPROM;
edev->nvmem_config.name = dev_name(&spi->dev);
edev->nvmem_config.dev = &spi->dev;
@@ -489,8 +524,9 @@ static int eeprom_93xx46_probe(struct spi_device *spi)
if (IS_ERR(edev->nvmem))
return PTR_ERR(edev->nvmem);
- dev_info(&spi->dev, "%d-bit eeprom %s\n",
+ dev_info(&spi->dev, "%d-bit eeprom containing %d bytes %s\n",
(pd->flags & EE_ADDR8) ? 8 : 16,
+ edev->size,
(pd->flags & EE_READONLY) ? "(readonly)" : "");
if (!(pd->flags & EE_READONLY)) {
diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c
index 81c70e5bc168..b0cff4b152da 100644
--- a/drivers/misc/eeprom/idt_89hpesx.c
+++ b/drivers/misc/eeprom/idt_89hpesx.c
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * This file is provided under a GPLv2 license. When using or
- * redistributing this file, you may do so under that license.
- *
- * GPL LICENSE SUMMARY
- *
* Copyright (C) 2016 T-Platforms. All Rights Reserved.
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, it can be found <http://www.gnu.org/licenses/>.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
* IDT PCIe-switch NTB Linux driver
*
* Contact Information:
@@ -1126,11 +1095,10 @@ static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
device_for_each_child_node(dev, fwnode) {
ee_id = idt_ee_match_id(fwnode);
- if (!ee_id) {
- dev_warn(dev, "Skip unsupported EEPROM device");
- continue;
- } else
+ if (ee_id)
break;
+
+ dev_warn(dev, "Skip unsupported EEPROM device %pfw\n", fwnode);
}
/* If there is no fwnode EEPROM device, then set zero size */
@@ -1161,6 +1129,7 @@ static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
else /* if (!fwnode_property_read_bool(node, "read-only")) */
pdev->eero = false;
+ fwnode_handle_put(fwnode);
dev_info(dev, "EEPROM of %d bytes found by 0x%x",
pdev->eesize, pdev->eeaddr);
}
diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c
index af3c497defb1..80c60fb41bbc 100644
--- a/drivers/misc/habanalabs/common/command_submission.c
+++ b/drivers/misc/habanalabs/common/command_submission.c
@@ -556,6 +556,13 @@ out:
else if (!cs->submitted)
cs->fence->error = -EBUSY;
+ if (unlikely(cs->skip_reset_on_timeout)) {
+ dev_err(hdev->dev,
+ "Command submission %llu completed after %llu (s)\n",
+ cs->sequence,
+ div_u64(jiffies - cs->submission_time_jiffies, HZ));
+ }
+
if (cs->timestamp)
cs->fence->timestamp = ktime_get();
complete_all(&cs->fence->completion);
@@ -571,6 +578,8 @@ static void cs_timedout(struct work_struct *work)
int rc;
struct hl_cs *cs = container_of(work, struct hl_cs,
work_tdr.work);
+ bool skip_reset_on_timeout = cs->skip_reset_on_timeout;
+
rc = cs_get_unless_zero(cs);
if (!rc)
return;
@@ -581,7 +590,8 @@ static void cs_timedout(struct work_struct *work)
}
/* Mark the CS is timed out so we won't try to cancel its TDR */
- cs->timedout = true;
+ if (likely(!skip_reset_on_timeout))
+ cs->timedout = true;
hdev = cs->ctx->hdev;
@@ -613,10 +623,12 @@ static void cs_timedout(struct work_struct *work)
cs_put(cs);
- if (hdev->reset_on_lockup)
- hl_device_reset(hdev, 0);
- else
- hdev->needs_reset = true;
+ if (likely(!skip_reset_on_timeout)) {
+ if (hdev->reset_on_lockup)
+ hl_device_reset(hdev, HL_RESET_TDR);
+ else
+ hdev->needs_reset = true;
+ }
}
static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
@@ -650,6 +662,10 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
cs->type = cs_type;
cs->timestamp = !!(flags & HL_CS_FLAGS_TIMESTAMP);
cs->timeout_jiffies = timeout;
+ cs->skip_reset_on_timeout =
+ hdev->skip_reset_on_timeout ||
+ !!(flags & HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT);
+ cs->submission_time_jiffies = jiffies;
INIT_LIST_HEAD(&cs->job_list);
INIT_DELAYED_WORK(&cs->work_tdr, cs_timedout);
kref_init(&cs->refcount);
@@ -1481,6 +1497,61 @@ out:
return rc;
}
+/*
+ * hl_cs_signal_sob_wraparound_handler: handle SOB value wrapaound case.
+ * if the SOB value reaches the max value move to the other SOB reserved
+ * to the queue.
+ * Note that this function must be called while hw_queues_lock is taken.
+ */
+int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
+ struct hl_hw_sob **hw_sob, u32 count)
+{
+ struct hl_sync_stream_properties *prop;
+ struct hl_hw_sob *sob = *hw_sob, *other_sob;
+ u8 other_sob_offset;
+
+ prop = &hdev->kernel_queues[q_idx].sync_stream_prop;
+
+ kref_get(&sob->kref);
+
+ /* check for wraparound */
+ if (prop->next_sob_val + count >= HL_MAX_SOB_VAL) {
+ /*
+ * Decrement as we reached the max value.
+ * The release function won't be called here as we've
+ * just incremented the refcount right before calling this
+ * function.
+ */
+ kref_put(&sob->kref, hl_sob_reset_error);
+
+ /*
+ * check the other sob value, if it still in use then fail
+ * otherwise make the switch
+ */
+ other_sob_offset = (prop->curr_sob_offset + 1) % HL_RSVD_SOBS;
+ other_sob = &prop->hw_sob[other_sob_offset];
+
+ if (kref_read(&other_sob->kref) != 1) {
+ dev_err(hdev->dev, "error: Cannot switch SOBs q_idx: %d\n",
+ q_idx);
+ return -EINVAL;
+ }
+
+ prop->next_sob_val = 1;
+
+ /* only two SOBs are currently in use */
+ prop->curr_sob_offset = other_sob_offset;
+ *hw_sob = other_sob;
+
+ dev_dbg(hdev->dev, "switched to SOB %d, q_idx: %d\n",
+ prop->curr_sob_offset, q_idx);
+ } else {
+ prop->next_sob_val += count;
+ }
+
+ return 0;
+}
+
static int cs_ioctl_extract_signal_seq(struct hl_device *hdev,
struct hl_cs_chunk *chunk, u64 *signal_seq, struct hl_ctx *ctx)
{
diff --git a/drivers/misc/habanalabs/common/context.c b/drivers/misc/habanalabs/common/context.c
index 62d705889ca8..19b6b045219e 100644
--- a/drivers/misc/habanalabs/common/context.c
+++ b/drivers/misc/habanalabs/common/context.c
@@ -12,7 +12,6 @@
static void hl_ctx_fini(struct hl_ctx *ctx)
{
struct hl_device *hdev = ctx->hdev;
- u64 idle_mask[HL_BUSY_ENGINES_MASK_EXT_SIZE] = {0};
int i;
/* Release all allocated pending cb's, those cb's were never
@@ -57,14 +56,6 @@ static void hl_ctx_fini(struct hl_ctx *ctx)
/* Scrub both SRAM and DRAM */
hdev->asic_funcs->scrub_device_mem(hdev, 0, 0);
-
- if ((!hdev->pldm) && (hdev->pdev) &&
- (!hdev->asic_funcs->is_device_idle(hdev,
- idle_mask,
- HL_BUSY_ENGINES_MASK_EXT_SIZE, NULL)))
- dev_notice(hdev->dev,
- "device not idle after user context is closed (0x%llx, 0x%llx)\n",
- idle_mask[0], idle_mask[1]);
} else {
dev_dbg(hdev->dev, "closing kernel context\n");
hdev->asic_funcs->ctx_fini(ctx);
diff --git a/drivers/misc/habanalabs/common/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c
index 8381155578a0..703d79fb6f3f 100644
--- a/drivers/misc/habanalabs/common/debugfs.c
+++ b/drivers/misc/habanalabs/common/debugfs.c
@@ -1278,6 +1278,11 @@ void hl_debugfs_add_device(struct hl_device *hdev)
dev_entry->root,
&dev_entry->blob_desc);
+ debugfs_create_x8("skip_reset_on_timeout",
+ 0644,
+ dev_entry->root,
+ &hdev->skip_reset_on_timeout);
+
for (i = 0, entry = dev_entry->entry_arr ; i < count ; i++, entry++) {
debugfs_create_file(hl_debugfs_list[i].name,
0444,
diff --git a/drivers/misc/habanalabs/common/device.c b/drivers/misc/habanalabs/common/device.c
index 00e92b678828..ff4cbde289c0 100644
--- a/drivers/misc/habanalabs/common/device.c
+++ b/drivers/misc/habanalabs/common/device.c
@@ -51,6 +51,8 @@ bool hl_device_operational(struct hl_device *hdev,
static void hpriv_release(struct kref *ref)
{
+ u64 idle_mask[HL_BUSY_ENGINES_MASK_EXT_SIZE] = {0};
+ bool device_is_idle = true;
struct hl_fpriv *hpriv;
struct hl_device *hdev;
@@ -71,8 +73,20 @@ static void hpriv_release(struct kref *ref)
kfree(hpriv);
- if (hdev->reset_upon_device_release)
- hl_device_reset(hdev, 0);
+ if ((!hdev->pldm) && (hdev->pdev) &&
+ (!hdev->asic_funcs->is_device_idle(hdev,
+ idle_mask,
+ HL_BUSY_ENGINES_MASK_EXT_SIZE, NULL))) {
+ dev_err(hdev->dev,
+ "device not idle after user context is closed (0x%llx_%llx)\n",
+ idle_mask[1], idle_mask[0]);
+
+ device_is_idle = false;
+ }
+
+ if ((hdev->reset_if_device_not_idle && !device_is_idle)
+ || hdev->reset_upon_device_release)
+ hl_device_reset(hdev, HL_RESET_DEVICE_RELEASE);
}
void hl_hpriv_get(struct hl_fpriv *hpriv)
@@ -118,6 +132,9 @@ static int hl_device_release(struct inode *inode, struct file *filp)
dev_warn(hdev->dev,
"Device is still in use because there are live CS and/or memory mappings\n");
+ hdev->last_open_session_duration_jif =
+ jiffies - hdev->last_successful_open_jif;
+
return 0;
}
@@ -868,7 +885,7 @@ static void device_disable_open_processes(struct hl_device *hdev)
int hl_device_reset(struct hl_device *hdev, u32 flags)
{
u64 idle_mask[HL_BUSY_ENGINES_MASK_EXT_SIZE] = {0};
- bool hard_reset, from_hard_reset_thread;
+ bool hard_reset, from_hard_reset_thread, hard_instead_soft = false;
int i, rc;
if (!hdev->init_done) {
@@ -880,11 +897,28 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
hard_reset = (flags & HL_RESET_HARD) != 0;
from_hard_reset_thread = (flags & HL_RESET_FROM_RESET_THREAD) != 0;
- if ((!hard_reset) && (!hdev->supports_soft_reset)) {
- dev_dbg(hdev->dev, "Doing hard-reset instead of soft-reset\n");
+ if (!hard_reset && !hdev->supports_soft_reset) {
+ hard_instead_soft = true;
+ hard_reset = true;
+ }
+
+ if (hdev->reset_upon_device_release &&
+ (flags & HL_RESET_DEVICE_RELEASE)) {
+ dev_dbg(hdev->dev,
+ "Perform %s-reset upon device release\n",
+ hard_reset ? "hard" : "soft");
+ goto do_reset;
+ }
+
+ if (!hard_reset && !hdev->allow_external_soft_reset) {
+ hard_instead_soft = true;
hard_reset = true;
}
+ if (hard_instead_soft)
+ dev_dbg(hdev->dev, "Doing hard-reset instead of soft-reset\n");
+
+do_reset:
/* Re-entry of reset thread */
if (from_hard_reset_thread && hdev->process_kill_trial_cnt)
goto kill_processes;
@@ -901,6 +935,19 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
return 0;
/*
+ * 'reset cause' is being updated here, because getting here
+ * means that it's the 1st time and the last time we're here
+ * ('in_reset' makes sure of it). This makes sure that
+ * 'reset_cause' will continue holding its 1st recorded reason!
+ */
+ if (flags & HL_RESET_HEARTBEAT)
+ hdev->curr_reset_cause = HL_RESET_CAUSE_HEARTBEAT;
+ else if (flags & HL_RESET_TDR)
+ hdev->curr_reset_cause = HL_RESET_CAUSE_TDR;
+ else
+ hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
+
+ /*
* if reset is due to heartbeat, device CPU is no responsive in
* which case no point sending PCI disable message to it
*/
@@ -943,9 +990,8 @@ again:
hdev->process_kill_trial_cnt = 0;
/*
- * Because the reset function can't run from interrupt or
- * from heartbeat work, we need to call the reset function
- * from a dedicated work
+ * Because the reset function can't run from heartbeat work,
+ * we need to call the reset function from a dedicated work.
*/
queue_delayed_work(hdev->device_reset_work.wq,
&hdev->device_reset_work.reset_work, 0);
@@ -1096,8 +1142,8 @@ kill_processes:
if (!hdev->asic_funcs->is_device_idle(hdev, idle_mask,
HL_BUSY_ENGINES_MASK_EXT_SIZE, NULL)) {
dev_err(hdev->dev,
- "device is not idle (mask %#llx %#llx) after reset\n",
- idle_mask[0], idle_mask[1]);
+ "device is not idle (mask 0x%llx_%llx) after reset\n",
+ idle_mask[1], idle_mask[0]);
rc = -EIO;
goto out_err;
}
@@ -1334,8 +1380,9 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
}
/*
- * From this point, in case of an error, add char devices and create
- * sysfs nodes as part of the error flow, to allow debugging.
+ * From this point, override rc (=0) in case of an error to allow
+ * debugging (by adding char devices and create sysfs nodes as part of
+ * the error flow).
*/
add_cdev_sysfs_on_err = true;
@@ -1369,7 +1416,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
dev_info(hdev->dev, "Found %s device with %lluGB DRAM\n",
hdev->asic_name,
- hdev->asic_prop.dram_size / 1024 / 1024 / 1024);
+ hdev->asic_prop.dram_size / SZ_1G);
rc = hl_vm_init(hdev);
if (rc) {
@@ -1475,6 +1522,7 @@ out_disabled:
void hl_device_fini(struct hl_device *hdev)
{
ktime_t timeout;
+ u64 reset_sec;
int i, rc;
dev_info(hdev->dev, "Removing device\n");
@@ -1482,6 +1530,11 @@ void hl_device_fini(struct hl_device *hdev)
hdev->device_fini_pending = 1;
flush_delayed_work(&hdev->device_reset_work.reset_work);
+ if (hdev->pldm)
+ reset_sec = HL_PLDM_HARD_RESET_MAX_TIMEOUT;
+ else
+ reset_sec = HL_HARD_RESET_MAX_TIMEOUT;
+
/*
* This function is competing with the reset function, so try to
* take the reset atomic and if we are already in middle of reset,
@@ -1490,8 +1543,7 @@ void hl_device_fini(struct hl_device *hdev)
* ports, the hard reset could take between 10-30 seconds
*/
- timeout = ktime_add_us(ktime_get(),
- HL_HARD_RESET_MAX_TIMEOUT * 1000 * 1000);
+ timeout = ktime_add_us(ktime_get(), reset_sec * 1000 * 1000);
rc = atomic_cmpxchg(&hdev->in_reset, 0, 1);
while (rc) {
usleep_range(50, 200);
diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 0713b2c12d54..2e4d04ec6b53 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -9,42 +9,63 @@
#include "../include/common/hl_boot_if.h"
#include <linux/firmware.h>
+#include <linux/crc32.h>
#include <linux/slab.h>
+#include <linux/ctype.h>
-#define FW_FILE_MAX_SIZE 0x1400000 /* maximum size of 20MB */
-/**
- * hl_fw_load_fw_to_device() - Load F/W code to device's memory.
- *
- * @hdev: pointer to hl_device structure.
- * @fw_name: the firmware image name
- * @dst: IO memory mapped address space to copy firmware to
- * @src_offset: offset in src FW to copy from
- * @size: amount of bytes to copy (0 to copy the whole binary)
- *
- * Copy fw code from firmware file to device memory.
- *
- * Return: 0 on success, non-zero for failure.
- */
-int hl_fw_load_fw_to_device(struct hl_device *hdev, const char *fw_name,
- void __iomem *dst, u32 src_offset, u32 size)
+#define FW_FILE_MAX_SIZE 0x1400000 /* maximum size of 20MB */
+
+#define FW_CPU_STATUS_POLL_INTERVAL_USEC 10000
+
+static char *extract_fw_ver_from_str(const char *fw_str)
+{
+ char *str, *fw_ver, *whitespace;
+
+ fw_ver = kmalloc(16, GFP_KERNEL);
+ if (!fw_ver)
+ return NULL;
+
+ str = strnstr(fw_str, "fw-", VERSION_MAX_LEN);
+ if (!str)
+ goto free_fw_ver;
+
+ /* Skip the fw- part */
+ str += 3;
+
+ /* Copy until the next whitespace */
+ whitespace = strnstr(str, " ", 15);
+ if (!whitespace)
+ goto free_fw_ver;
+
+ strscpy(fw_ver, str, whitespace - str + 1);
+
+ return fw_ver;
+
+free_fw_ver:
+ kfree(fw_ver);
+ return NULL;
+}
+
+static int hl_request_fw(struct hl_device *hdev,
+ const struct firmware **firmware_p,
+ const char *fw_name)
{
- const struct firmware *fw;
- const void *fw_data;
size_t fw_size;
int rc;
- rc = request_firmware(&fw, fw_name, hdev->dev);
+ rc = request_firmware(firmware_p, fw_name, hdev->dev);
if (rc) {
- dev_err(hdev->dev, "Firmware file %s is not found!\n", fw_name);
+ dev_err(hdev->dev, "Firmware file %s is not found! (error %d)\n",
+ fw_name, rc);
goto out;
}
- fw_size = fw->size;
+ fw_size = (*firmware_p)->size;
if ((fw_size % 4) != 0) {
dev_err(hdev->dev, "Illegal %s firmware size %zu\n",
- fw_name, fw_size);
+ fw_name, fw_size);
rc = -EINVAL;
- goto out;
+ goto release_fw;
}
dev_dbg(hdev->dev, "%s firmware size == %zu\n", fw_name, fw_size);
@@ -54,26 +75,125 @@ int hl_fw_load_fw_to_device(struct hl_device *hdev, const char *fw_name,
"FW file size %zu exceeds maximum of %u bytes\n",
fw_size, FW_FILE_MAX_SIZE);
rc = -EINVAL;
- goto out;
+ goto release_fw;
}
- if (size - src_offset > fw_size) {
+ return 0;
+
+release_fw:
+ release_firmware(*firmware_p);
+out:
+ return rc;
+}
+
+/**
+ * hl_release_firmware() - release FW
+ *
+ * @fw: fw descriptor
+ *
+ * note: this inline function added to serve as a comprehensive mirror for the
+ * hl_request_fw function.
+ */
+static inline void hl_release_firmware(const struct firmware *fw)
+{
+ release_firmware(fw);
+}
+
+/**
+ * hl_fw_copy_fw_to_device() - copy FW to device
+ *
+ * @hdev: pointer to hl_device structure.
+ * @fw: fw descriptor
+ * @dst: IO memory mapped address space to copy firmware to
+ * @src_offset: offset in src FW to copy from
+ * @size: amount of bytes to copy (0 to copy the whole binary)
+ *
+ * actual copy of FW binary data to device, shared by static and dynamic loaders
+ */
+static int hl_fw_copy_fw_to_device(struct hl_device *hdev,
+ const struct firmware *fw, void __iomem *dst,
+ u32 src_offset, u32 size)
+{
+ const void *fw_data;
+
+ /* size 0 indicates to copy the whole file */
+ if (!size)
+ size = fw->size;
+
+ if (src_offset + size > fw->size) {
dev_err(hdev->dev,
"size to copy(%u) and offset(%u) are invalid\n",
size, src_offset);
- rc = -EINVAL;
- goto out;
+ return -EINVAL;
}
- if (size)
- fw_size = size;
-
fw_data = (const void *) fw->data;
- memcpy_toio(dst, fw_data + src_offset, fw_size);
+ memcpy_toio(dst, fw_data + src_offset, size);
+ return 0;
+}
-out:
- release_firmware(fw);
+/**
+ * hl_fw_copy_msg_to_device() - copy message to device
+ *
+ * @hdev: pointer to hl_device structure.
+ * @msg: message
+ * @dst: IO memory mapped address space to copy firmware to
+ * @src_offset: offset in src message to copy from
+ * @size: amount of bytes to copy (0 to copy the whole binary)
+ *
+ * actual copy of message data to device.
+ */
+static int hl_fw_copy_msg_to_device(struct hl_device *hdev,
+ struct lkd_msg_comms *msg, void __iomem *dst,
+ u32 src_offset, u32 size)
+{
+ void *msg_data;
+
+ /* size 0 indicates to copy the whole file */
+ if (!size)
+ size = sizeof(struct lkd_msg_comms);
+
+ if (src_offset + size > sizeof(struct lkd_msg_comms)) {
+ dev_err(hdev->dev,
+ "size to copy(%u) and offset(%u) are invalid\n",
+ size, src_offset);
+ return -EINVAL;
+ }
+
+ msg_data = (void *) msg;
+
+ memcpy_toio(dst, msg_data + src_offset, size);
+
+ return 0;
+}
+
+/**
+ * hl_fw_load_fw_to_device() - Load F/W code to device's memory.
+ *
+ * @hdev: pointer to hl_device structure.
+ * @fw_name: the firmware image name
+ * @dst: IO memory mapped address space to copy firmware to
+ * @src_offset: offset in src FW to copy from
+ * @size: amount of bytes to copy (0 to copy the whole binary)
+ *
+ * Copy fw code from firmware file to device memory.
+ *
+ * Return: 0 on success, non-zero for failure.
+ */
+int hl_fw_load_fw_to_device(struct hl_device *hdev, const char *fw_name,
+ void __iomem *dst, u32 src_offset, u32 size)
+{
+ const struct firmware *fw;
+ int rc;
+
+ rc = hl_request_fw(hdev, &fw, fw_name);
+ if (rc)
+ return rc;
+
+ rc = hl_fw_copy_fw_to_device(hdev, fw, dst, src_offset, size);
+
+ hl_release_firmware(fw);
return rc;
}
@@ -91,6 +211,7 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
u16 len, u32 timeout, u64 *result)
{
struct hl_hw_queue *queue = &hdev->kernel_queues[hw_queue_id];
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
struct cpucp_packet *pkt;
dma_addr_t pkt_dma_addr;
u32 tmp, expected_ack_val;
@@ -117,7 +238,7 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
}
/* set fence to a non valid value */
- pkt->fence = UINT_MAX;
+ pkt->fence = cpu_to_le32(UINT_MAX);
rc = hl_hw_queue_send_cb_no_cmpl(hdev, hw_queue_id, len, pkt_dma_addr);
if (rc) {
@@ -125,8 +246,7 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
goto out;
}
- if (hdev->asic_prop.fw_app_security_map &
- CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN)
+ if (prop->fw_app_cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN)
expected_ack_val = queue->pi;
else
expected_ack_val = CPUCP_PACKET_FENCE_VAL;
@@ -272,10 +392,11 @@ void hl_fw_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size,
int hl_fw_send_heartbeat(struct hl_device *hdev)
{
- struct cpucp_packet hb_pkt = {};
+ struct cpucp_packet hb_pkt;
u64 result;
int rc;
+ memset(&hb_pkt, 0, sizeof(hb_pkt));
hb_pkt.ctl = cpu_to_le32(CPUCP_PACKET_TEST <<
CPUCP_PKT_CTL_OPCODE_SHIFT);
hb_pkt.value = cpu_to_le64(CPUCP_PACKET_FENCE_VAL);
@@ -284,29 +405,24 @@ int hl_fw_send_heartbeat(struct hl_device *hdev)
sizeof(hb_pkt), 0, &result);
if ((rc) || (result != CPUCP_PACKET_FENCE_VAL))
+ return -EIO;
+
+ if (le32_to_cpu(hb_pkt.status_mask) &
+ CPUCP_PKT_HB_STATUS_EQ_FAULT_MASK) {
+ dev_warn(hdev->dev, "FW reported EQ fault during heartbeat\n");
rc = -EIO;
+ }
return rc;
}
-static int fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg,
- u32 cpu_security_boot_status_reg)
+static bool fw_report_boot_dev0(struct hl_device *hdev, u32 err_val,
+ u32 sts_val)
{
- u32 err_val, security_val;
bool err_exists = false;
- /* Some of the firmware status codes are deprecated in newer f/w
- * versions. In those versions, the errors are reported
- * in different registers. Therefore, we need to check those
- * registers and print the exact errors. Moreover, there
- * may be multiple errors, so we need to report on each error
- * separately. Some of the error codes might indicate a state
- * that is not an error per-se, but it is an error in production
- * environment
- */
- err_val = RREG32(boot_err0_reg);
if (!(err_val & CPU_BOOT_ERR0_ENABLED))
- return 0;
+ return false;
if (err_val & CPU_BOOT_ERR0_DRAM_INIT_FAIL) {
dev_err(hdev->dev,
@@ -377,44 +493,120 @@ static int fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg,
err_exists = true;
}
+ if (err_val & CPU_BOOT_ERR0_PRI_IMG_VER_FAIL) {
+ dev_warn(hdev->dev,
+ "Device boot warning - Failed to load preboot primary image\n");
+ /* This is a warning so we don't want it to disable the
+ * device as we have a secondary preboot image
+ */
+ err_val &= ~CPU_BOOT_ERR0_PRI_IMG_VER_FAIL;
+ }
+
+ if (err_val & CPU_BOOT_ERR0_SEC_IMG_VER_FAIL) {
+ dev_err(hdev->dev, "Device boot error - Failed to load preboot secondary image\n");
+ err_exists = true;
+ }
+
if (err_val & CPU_BOOT_ERR0_PLL_FAIL) {
dev_err(hdev->dev, "Device boot error - PLL failure\n");
err_exists = true;
}
if (err_val & CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL) {
- dev_err(hdev->dev,
- "Device boot error - device unusable\n");
- err_exists = true;
+ /* Ignore this bit, don't prevent driver loading */
+ dev_dbg(hdev->dev, "device unusable status is set\n");
+ err_val &= ~CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL;
}
- security_val = RREG32(cpu_security_boot_status_reg);
- if (security_val & CPU_BOOT_DEV_STS0_ENABLED)
- dev_dbg(hdev->dev, "Device security status %#x\n",
- security_val);
+ if (sts_val & CPU_BOOT_DEV_STS0_ENABLED)
+ dev_dbg(hdev->dev, "Device status0 %#x\n", sts_val);
if (!err_exists && (err_val & ~CPU_BOOT_ERR0_ENABLED)) {
dev_err(hdev->dev,
- "Device boot error - unknown error 0x%08x\n",
- err_val);
+ "Device boot error - unknown ERR0 error 0x%08x\n", err_val);
err_exists = true;
}
+ /* return error only if it's in the predefined mask */
if (err_exists && ((err_val & ~CPU_BOOT_ERR0_ENABLED) &
lower_32_bits(hdev->boot_error_status_mask)))
+ return true;
+
+ return false;
+}
+
+/* placeholder for ERR1 as no errors defined there yet */
+static bool fw_report_boot_dev1(struct hl_device *hdev, u32 err_val,
+ u32 sts_val)
+{
+ /*
+ * keep this variable to preserve the logic of the function.
+ * this way it would require less modifications when error will be
+ * added to DEV_ERR1
+ */
+ bool err_exists = false;
+
+ if (!(err_val & CPU_BOOT_ERR1_ENABLED))
+ return false;
+
+ if (sts_val & CPU_BOOT_DEV_STS1_ENABLED)
+ dev_dbg(hdev->dev, "Device status1 %#x\n", sts_val);
+
+ if (!err_exists && (err_val & ~CPU_BOOT_ERR1_ENABLED)) {
+ dev_err(hdev->dev,
+ "Device boot error - unknown ERR1 error 0x%08x\n",
+ err_val);
+ err_exists = true;
+ }
+
+ /* return error only if it's in the predefined mask */
+ if (err_exists && ((err_val & ~CPU_BOOT_ERR1_ENABLED) &
+ upper_32_bits(hdev->boot_error_status_mask)))
+ return true;
+
+ return false;
+}
+
+static int fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg,
+ u32 boot_err1_reg, u32 cpu_boot_dev_status0_reg,
+ u32 cpu_boot_dev_status1_reg)
+{
+ u32 err_val, status_val;
+ bool err_exists = false;
+
+ /* Some of the firmware status codes are deprecated in newer f/w
+ * versions. In those versions, the errors are reported
+ * in different registers. Therefore, we need to check those
+ * registers and print the exact errors. Moreover, there
+ * may be multiple errors, so we need to report on each error
+ * separately. Some of the error codes might indicate a state
+ * that is not an error per-se, but it is an error in production
+ * environment
+ */
+ err_val = RREG32(boot_err0_reg);
+ status_val = RREG32(cpu_boot_dev_status0_reg);
+ err_exists = fw_report_boot_dev0(hdev, err_val, status_val);
+
+ err_val = RREG32(boot_err1_reg);
+ status_val = RREG32(cpu_boot_dev_status1_reg);
+ err_exists |= fw_report_boot_dev1(hdev, err_val, status_val);
+
+ if (err_exists)
return -EIO;
return 0;
}
int hl_fw_cpucp_info_get(struct hl_device *hdev,
- u32 cpu_security_boot_status_reg,
- u32 boot_err0_reg)
+ u32 sts_boot_dev_sts0_reg,
+ u32 sts_boot_dev_sts1_reg, u32 boot_err0_reg,
+ u32 boot_err1_reg)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
struct cpucp_packet pkt = {};
- void *cpucp_info_cpu_addr;
dma_addr_t cpucp_info_dma_addr;
+ void *cpucp_info_cpu_addr;
+ char *kernel_ver;
u64 result;
int rc;
@@ -443,7 +635,8 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev,
goto out;
}
- rc = fw_read_errors(hdev, boot_err0_reg, cpu_security_boot_status_reg);
+ rc = fw_read_errors(hdev, boot_err0_reg, boot_err1_reg,
+ sts_boot_dev_sts0_reg, sts_boot_dev_sts1_reg);
if (rc) {
dev_err(hdev->dev, "Errors in device boot\n");
goto out;
@@ -460,10 +653,27 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev,
goto out;
}
+ kernel_ver = extract_fw_ver_from_str(prop->cpucp_info.kernel_version);
+ if (kernel_ver) {
+ dev_info(hdev->dev, "Linux version %s", kernel_ver);
+ kfree(kernel_ver);
+ }
+
+ /* assume EQ code doesn't need to check eqe index */
+ hdev->event_queue.check_eqe_index = false;
+
/* Read FW application security bits again */
- if (hdev->asic_prop.fw_security_status_valid)
- hdev->asic_prop.fw_app_security_map =
- RREG32(cpu_security_boot_status_reg);
+ if (hdev->asic_prop.fw_cpu_boot_dev_sts0_valid) {
+ hdev->asic_prop.fw_app_cpu_boot_dev_sts0 =
+ RREG32(sts_boot_dev_sts0_reg);
+ if (hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_EQ_INDEX_EN)
+ hdev->event_queue.check_eqe_index = true;
+ }
+
+ if (hdev->asic_prop.fw_cpu_boot_dev_sts1_valid)
+ hdev->asic_prop.fw_app_cpu_boot_dev_sts1 =
+ RREG32(sts_boot_dev_sts1_reg);
out:
hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev,
@@ -501,7 +711,8 @@ static int hl_fw_send_msi_info_msg(struct hl_device *hdev)
pkt->length = cpu_to_le32(CPUCP_NUM_OF_MSI_TYPES);
- hdev->asic_funcs->get_msi_info((u32 *)&pkt->data);
+ memset((void *) &pkt->data, 0xFF, data_size);
+ hdev->asic_funcs->get_msi_info(pkt->data);
pkt->cpucp_pkt.ctl = cpu_to_le32(CPUCP_PACKET_MSI_INFO_SET <<
CPUCP_PKT_CTL_OPCODE_SHIFT);
@@ -526,13 +737,15 @@ static int hl_fw_send_msi_info_msg(struct hl_device *hdev)
}
int hl_fw_cpucp_handshake(struct hl_device *hdev,
- u32 cpu_security_boot_status_reg,
- u32 boot_err0_reg)
+ u32 sts_boot_dev_sts0_reg,
+ u32 sts_boot_dev_sts1_reg, u32 boot_err0_reg,
+ u32 boot_err1_reg)
{
int rc;
- rc = hl_fw_cpucp_info_get(hdev, cpu_security_boot_status_reg,
- boot_err0_reg);
+ rc = hl_fw_cpucp_info_get(hdev, sts_boot_dev_sts0_reg,
+ sts_boot_dev_sts1_reg, boot_err0_reg,
+ boot_err1_reg);
if (rc)
return rc;
@@ -667,8 +880,8 @@ int get_used_pll_index(struct hl_device *hdev, u32 input_pll_index,
bool dynamic_pll;
int fw_pll_idx;
- dynamic_pll = prop->fw_security_status_valid &&
- (prop->fw_app_security_map & CPU_BOOT_DEV_STS0_DYN_PLL_EN);
+ dynamic_pll = !!(prop->fw_app_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_DYN_PLL_EN);
if (!dynamic_pll) {
/*
@@ -759,6 +972,47 @@ int hl_fw_cpucp_power_get(struct hl_device *hdev, u64 *power)
return rc;
}
+void hl_fw_ask_hard_reset_without_linux(struct hl_device *hdev)
+{
+ struct static_fw_load_mgr *static_loader =
+ &hdev->fw_loader.static_loader;
+ int rc;
+
+ if (hdev->asic_prop.dynamic_fw_load) {
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, &hdev->fw_loader,
+ COMMS_RST_DEV, 0, false,
+ hdev->fw_loader.cpu_timeout);
+ if (rc)
+ dev_warn(hdev->dev, "Failed sending COMMS_RST_DEV\n");
+ } else {
+ WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_RST_DEV);
+ }
+}
+
+void hl_fw_ask_halt_machine_without_linux(struct hl_device *hdev)
+{
+ struct static_fw_load_mgr *static_loader =
+ &hdev->fw_loader.static_loader;
+ int rc;
+
+ if (hdev->device_cpu_is_halted)
+ return;
+
+ /* Stop device CPU to make sure nothing bad happens */
+ if (hdev->asic_prop.dynamic_fw_load) {
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, &hdev->fw_loader,
+ COMMS_GOTO_WFE, 0, true,
+ hdev->fw_loader.cpu_timeout);
+ if (rc)
+ dev_warn(hdev->dev, "Failed sending COMMS_GOTO_WFE\n");
+ } else {
+ WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_GOTO_WFE);
+ msleep(static_loader->cpu_reset_wait_msec);
+ }
+
+ hdev->device_cpu_is_halted = true;
+}
+
static void detect_cpu_boot_status(struct hl_device *hdev, u32 status)
{
/* Some of the status codes below are deprecated in newer f/w
@@ -767,63 +1021,59 @@ static void detect_cpu_boot_status(struct hl_device *hdev, u32 status)
switch (status) {
case CPU_BOOT_STATUS_NA:
dev_err(hdev->dev,
- "Device boot error - BTL did NOT run\n");
+ "Device boot progress - BTL did NOT run\n");
break;
case CPU_BOOT_STATUS_IN_WFE:
dev_err(hdev->dev,
- "Device boot error - Stuck inside WFE loop\n");
+ "Device boot progress - Stuck inside WFE loop\n");
break;
case CPU_BOOT_STATUS_IN_BTL:
dev_err(hdev->dev,
- "Device boot error - Stuck in BTL\n");
+ "Device boot progress - Stuck in BTL\n");
break;
case CPU_BOOT_STATUS_IN_PREBOOT:
dev_err(hdev->dev,
- "Device boot error - Stuck in Preboot\n");
+ "Device boot progress - Stuck in Preboot\n");
break;
case CPU_BOOT_STATUS_IN_SPL:
dev_err(hdev->dev,
- "Device boot error - Stuck in SPL\n");
+ "Device boot progress - Stuck in SPL\n");
break;
case CPU_BOOT_STATUS_IN_UBOOT:
dev_err(hdev->dev,
- "Device boot error - Stuck in u-boot\n");
+ "Device boot progress - Stuck in u-boot\n");
break;
case CPU_BOOT_STATUS_DRAM_INIT_FAIL:
dev_err(hdev->dev,
- "Device boot error - DRAM initialization failed\n");
+ "Device boot progress - DRAM initialization failed\n");
break;
case CPU_BOOT_STATUS_UBOOT_NOT_READY:
dev_err(hdev->dev,
- "Device boot error - u-boot stopped by user\n");
+ "Device boot progress - Cannot boot\n");
break;
case CPU_BOOT_STATUS_TS_INIT_FAIL:
dev_err(hdev->dev,
- "Device boot error - Thermal Sensor initialization failed\n");
+ "Device boot progress - Thermal Sensor initialization failed\n");
break;
default:
dev_err(hdev->dev,
- "Device boot error - Invalid status code %d\n",
+ "Device boot progress - Invalid status code %d\n",
status);
break;
}
}
-int hl_fw_read_preboot_status(struct hl_device *hdev, u32 cpu_boot_status_reg,
- u32 cpu_security_boot_status_reg, u32 boot_err0_reg,
- u32 timeout)
+static int hl_fw_read_preboot_caps(struct hl_device *hdev,
+ u32 cpu_boot_status_reg,
+ u32 sts_boot_dev_sts0_reg,
+ u32 sts_boot_dev_sts1_reg,
+ u32 boot_err0_reg, u32 boot_err1_reg,
+ u32 timeout)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
- u32 status, security_status;
+ u32 status, reg_val;
int rc;
- /* pldm was added for cases in which we use preboot on pldm and want
- * to load boot fit, but we can't wait for preboot because it runs
- * very slowly
- */
- if (!(hdev->fw_components & FW_TYPE_PREBOOT_CPU) || hdev->pldm)
- return 0;
-
/* Need to check two possible scenarios:
*
* CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT - for newer firmwares where
@@ -842,29 +1092,145 @@ int hl_fw_read_preboot_status(struct hl_device *hdev, u32 cpu_boot_status_reg,
(status == CPU_BOOT_STATUS_READY_TO_BOOT) ||
(status == CPU_BOOT_STATUS_SRAM_AVAIL) ||
(status == CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT),
- 10000,
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
timeout);
if (rc) {
- dev_err(hdev->dev, "Failed to read preboot version\n");
+ dev_err(hdev->dev, "CPU boot ready status timeout\n");
detect_cpu_boot_status(hdev, status);
/* If we read all FF, then something is totally wrong, no point
* of reading specific errors
*/
if (status != -1)
- fw_read_errors(hdev, boot_err0_reg,
- cpu_security_boot_status_reg);
+ fw_read_errors(hdev, boot_err0_reg, boot_err1_reg,
+ sts_boot_dev_sts0_reg,
+ sts_boot_dev_sts1_reg);
return -EIO;
}
- rc = hdev->asic_funcs->read_device_fw_version(hdev, FW_COMP_PREBOOT);
- if (rc)
- return rc;
+ /*
+ * the registers DEV_STS* contain FW capabilities/features.
+ * We can rely on this registers only if bit CPU_BOOT_DEV_STS*_ENABLED
+ * is set.
+ * In the first read of this register we store the value of this
+ * register ONLY if the register is enabled (which will be propagated
+ * to next stages) and also mark the register as valid.
+ * In case it is not enabled the stored value will be left 0- all
+ * caps/features are off
+ */
+ reg_val = RREG32(sts_boot_dev_sts0_reg);
+ if (reg_val & CPU_BOOT_DEV_STS0_ENABLED) {
+ prop->fw_cpu_boot_dev_sts0_valid = true;
+ prop->fw_preboot_cpu_boot_dev_sts0 = reg_val;
+ }
+
+ reg_val = RREG32(sts_boot_dev_sts1_reg);
+ if (reg_val & CPU_BOOT_DEV_STS1_ENABLED) {
+ prop->fw_cpu_boot_dev_sts1_valid = true;
+ prop->fw_preboot_cpu_boot_dev_sts1 = reg_val;
+ }
- security_status = RREG32(cpu_security_boot_status_reg);
+ prop->dynamic_fw_load = !!(prop->fw_preboot_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_FW_LD_COM_EN);
+
+ /* initialize FW loader once we know what load protocol is used */
+ hdev->asic_funcs->init_firmware_loader(hdev);
+
+ dev_dbg(hdev->dev, "Attempting %s FW load\n",
+ prop->dynamic_fw_load ? "dynamic" : "legacy");
+ return 0;
+}
- /* We read security status multiple times during boot:
+static int hl_fw_static_read_device_fw_version(struct hl_device *hdev,
+ enum hl_fw_component fwc)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct fw_load_mgr *fw_loader = &hdev->fw_loader;
+ struct static_fw_load_mgr *static_loader;
+ char *dest, *boot_ver, *preboot_ver;
+ u32 ver_off, limit;
+ const char *name;
+ char btl_ver[32];
+
+ static_loader = &hdev->fw_loader.static_loader;
+
+ switch (fwc) {
+ case FW_COMP_BOOT_FIT:
+ ver_off = RREG32(static_loader->boot_fit_version_offset_reg);
+ dest = prop->uboot_ver;
+ name = "Boot-fit";
+ limit = static_loader->boot_fit_version_max_off;
+ break;
+ case FW_COMP_PREBOOT:
+ ver_off = RREG32(static_loader->preboot_version_offset_reg);
+ dest = prop->preboot_ver;
+ name = "Preboot";
+ limit = static_loader->preboot_version_max_off;
+ break;
+ default:
+ dev_warn(hdev->dev, "Undefined FW component: %d\n", fwc);
+ return -EIO;
+ }
+
+ ver_off &= static_loader->sram_offset_mask;
+
+ if (ver_off < limit) {
+ memcpy_fromio(dest,
+ hdev->pcie_bar[fw_loader->sram_bar_id] + ver_off,
+ VERSION_MAX_LEN);
+ } else {
+ dev_err(hdev->dev, "%s version offset (0x%x) is above SRAM\n",
+ name, ver_off);
+ strscpy(dest, "unavailable", VERSION_MAX_LEN);
+ return -EIO;
+ }
+
+ if (fwc == FW_COMP_BOOT_FIT) {
+ boot_ver = extract_fw_ver_from_str(prop->uboot_ver);
+ if (boot_ver) {
+ dev_info(hdev->dev, "boot-fit version %s\n", boot_ver);
+ kfree(boot_ver);
+ }
+ } else if (fwc == FW_COMP_PREBOOT) {
+ preboot_ver = strnstr(prop->preboot_ver, "Preboot",
+ VERSION_MAX_LEN);
+ if (preboot_ver && preboot_ver != prop->preboot_ver) {
+ strscpy(btl_ver, prop->preboot_ver,
+ min((int) (preboot_ver - prop->preboot_ver),
+ 31));
+ dev_info(hdev->dev, "%s\n", btl_ver);
+ }
+
+ preboot_ver = extract_fw_ver_from_str(prop->preboot_ver);
+ if (preboot_ver) {
+ dev_info(hdev->dev, "preboot version %s\n",
+ preboot_ver);
+ kfree(preboot_ver);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * hl_fw_preboot_update_state - update internal data structures during
+ * handshake with preboot
+ *
+ *
+ * @hdev: pointer to the habanalabs device structure
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static void hl_fw_preboot_update_state(struct hl_device *hdev)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ u32 cpu_boot_dev_sts0, cpu_boot_dev_sts1;
+
+ cpu_boot_dev_sts0 = prop->fw_preboot_cpu_boot_dev_sts0;
+ cpu_boot_dev_sts1 = prop->fw_preboot_cpu_boot_dev_sts1;
+
+ /* We read boot_dev_sts registers multiple times during boot:
* 1. preboot - a. Check whether the security status bits are valid
* b. Check whether fw security is enabled
* c. Check whether hard reset is done by preboot
@@ -874,48 +1240,1121 @@ int hl_fw_read_preboot_status(struct hl_device *hdev, u32 cpu_boot_status_reg,
* b. Check whether hard reset is done by fw app
*
* Preboot:
- * Check security status bit (CPU_BOOT_DEV_STS0_ENABLED), if it is set
+ * Check security status bit (CPU_BOOT_DEV_STS0_ENABLED). If set, then-
* check security enabled bit (CPU_BOOT_DEV_STS0_SECURITY_EN)
+ * If set, then mark GIC controller to be disabled.
*/
- if (security_status & CPU_BOOT_DEV_STS0_ENABLED) {
- prop->fw_security_status_valid = 1;
+ prop->hard_reset_done_by_fw =
+ !!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_FW_HARD_RST_EN);
- /* FW security should be derived from PCI ID, we keep this
- * check for backward compatibility
- */
- if (security_status & CPU_BOOT_DEV_STS0_SECURITY_EN)
- prop->fw_security_disabled = false;
+ dev_dbg(hdev->dev, "Firmware preboot boot device status0 %#x\n",
+ cpu_boot_dev_sts0);
+
+ dev_dbg(hdev->dev, "Firmware preboot boot device status1 %#x\n",
+ cpu_boot_dev_sts1);
+
+ dev_dbg(hdev->dev, "Firmware preboot hard-reset is %s\n",
+ prop->hard_reset_done_by_fw ? "enabled" : "disabled");
+
+ dev_dbg(hdev->dev, "firmware-level security is %s\n",
+ prop->fw_security_enabled ? "enabled" : "disabled");
+
+ dev_dbg(hdev->dev, "GIC controller is %s\n",
+ prop->gic_interrupts_enable ? "enabled" : "disabled");
+}
+
+static int hl_fw_static_read_preboot_status(struct hl_device *hdev)
+{
+ int rc;
+
+ rc = hl_fw_static_read_device_fw_version(hdev, FW_COMP_PREBOOT);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+int hl_fw_read_preboot_status(struct hl_device *hdev, u32 cpu_boot_status_reg,
+ u32 sts_boot_dev_sts0_reg,
+ u32 sts_boot_dev_sts1_reg, u32 boot_err0_reg,
+ u32 boot_err1_reg, u32 timeout)
+{
+ int rc;
+
+ /* pldm was added for cases in which we use preboot on pldm and want
+ * to load boot fit, but we can't wait for preboot because it runs
+ * very slowly
+ */
+ if (!(hdev->fw_components & FW_TYPE_PREBOOT_CPU) || hdev->pldm)
+ return 0;
+
+ /*
+ * In order to determine boot method (static VS dymanic) we need to
+ * read the boot caps register
+ */
+ rc = hl_fw_read_preboot_caps(hdev, cpu_boot_status_reg,
+ sts_boot_dev_sts0_reg,
+ sts_boot_dev_sts1_reg, boot_err0_reg,
+ boot_err1_reg, timeout);
+ if (rc)
+ return rc;
+
+ hl_fw_preboot_update_state(hdev);
- if (security_status & CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
+ /* no need to read preboot status in dynamic load */
+ if (hdev->asic_prop.dynamic_fw_load)
+ return 0;
+
+ return hl_fw_static_read_preboot_status(hdev);
+}
+
+/* associate string with COMM status */
+static char *hl_dynamic_fw_status_str[COMMS_STS_INVLD_LAST] = {
+ [COMMS_STS_NOOP] = "NOOP",
+ [COMMS_STS_ACK] = "ACK",
+ [COMMS_STS_OK] = "OK",
+ [COMMS_STS_ERR] = "ERR",
+ [COMMS_STS_VALID_ERR] = "VALID_ERR",
+ [COMMS_STS_TIMEOUT_ERR] = "TIMEOUT_ERR",
+};
+
+/**
+ * hl_fw_dynamic_report_error_status - report error status
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @status: value of FW status register
+ * @expected_status: the expected status
+ */
+static void hl_fw_dynamic_report_error_status(struct hl_device *hdev,
+ u32 status,
+ enum comms_sts expected_status)
+{
+ enum comms_sts comm_status =
+ FIELD_GET(COMMS_STATUS_STATUS_MASK, status);
+
+ if (comm_status < COMMS_STS_INVLD_LAST)
+ dev_err(hdev->dev, "Device status %s, expected status: %s\n",
+ hl_dynamic_fw_status_str[comm_status],
+ hl_dynamic_fw_status_str[expected_status]);
+ else
+ dev_err(hdev->dev, "Device status unknown %d, expected status: %s\n",
+ comm_status,
+ hl_dynamic_fw_status_str[expected_status]);
+}
+
+/**
+ * hl_fw_dynamic_send_cmd - send LKD to FW cmd
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @cmd: LKD to FW cmd code
+ * @size: size of next FW component to be loaded (0 if not necessary)
+ *
+ * LDK to FW exact command layout is defined at struct comms_command.
+ * note: the size argument is used only when the next FW component should be
+ * loaded, otherwise it shall be 0. the size is used by the FW in later
+ * protocol stages and when sending only indicating the amount of memory
+ * to be allocated by the FW to receive the next boot component.
+ */
+static void hl_fw_dynamic_send_cmd(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ enum comms_cmd cmd, unsigned int size)
+{
+ struct cpu_dyn_regs *dyn_regs;
+ u32 val;
+
+ dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs;
+
+ val = FIELD_PREP(COMMS_COMMAND_CMD_MASK, cmd);
+ val |= FIELD_PREP(COMMS_COMMAND_SIZE_MASK, size);
+
+ WREG32(le32_to_cpu(dyn_regs->kmd_msg_to_cpu), val);
+}
+
+/**
+ * hl_fw_dynamic_extract_fw_response - update the FW response
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @response: FW response
+ * @status: the status read from CPU status register
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_dynamic_extract_fw_response(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ struct fw_response *response,
+ u32 status)
+{
+ response->status = FIELD_GET(COMMS_STATUS_STATUS_MASK, status);
+ response->ram_offset = FIELD_GET(COMMS_STATUS_OFFSET_MASK, status) <<
+ COMMS_STATUS_OFFSET_ALIGN_SHIFT;
+ response->ram_type = FIELD_GET(COMMS_STATUS_RAM_TYPE_MASK, status);
+
+ if ((response->ram_type != COMMS_SRAM) &&
+ (response->ram_type != COMMS_DRAM)) {
+ dev_err(hdev->dev, "FW status: invalid RAM type %u\n",
+ response->ram_type);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * hl_fw_dynamic_wait_for_status - wait for status in dynamic FW load
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @expected_status: expected status to wait for
+ * @timeout: timeout for status wait
+ *
+ * @return 0 on success, otherwise non-zero error code
+ *
+ * waiting for status from FW include polling the FW status register until
+ * expected status is received or timeout occurs (whatever occurs first).
+ */
+static int hl_fw_dynamic_wait_for_status(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ enum comms_sts expected_status,
+ u32 timeout)
+{
+ struct cpu_dyn_regs *dyn_regs;
+ u32 status;
+ int rc;
+
+ dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs;
+
+ /* Wait for expected status */
+ rc = hl_poll_timeout(
+ hdev,
+ le32_to_cpu(dyn_regs->cpu_cmd_status_to_host),
+ status,
+ FIELD_GET(COMMS_STATUS_STATUS_MASK, status) == expected_status,
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ timeout);
+
+ if (rc) {
+ hl_fw_dynamic_report_error_status(hdev, status,
+ expected_status);
+ return -EIO;
+ }
+
+ /*
+ * skip storing FW response for NOOP to preserve the actual desired
+ * FW status
+ */
+ if (expected_status == COMMS_STS_NOOP)
+ return 0;
+
+ rc = hl_fw_dynamic_extract_fw_response(hdev, fw_loader,
+ &fw_loader->dynamic_loader.response,
+ status);
+ return rc;
+}
+
+/**
+ * hl_fw_dynamic_send_clear_cmd - send clear command to FW
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ *
+ * @return 0 on success, otherwise non-zero error code
+ *
+ * after command cycle between LKD to FW CPU (i.e. LKD got an expected status
+ * from FW) we need to clear the CPU status register in order to avoid garbage
+ * between command cycles.
+ * This is done by sending clear command and polling the CPU to LKD status
+ * register to hold the status NOOP
+ */
+static int hl_fw_dynamic_send_clear_cmd(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader)
+{
+ hl_fw_dynamic_send_cmd(hdev, fw_loader, COMMS_CLR_STS, 0);
+
+ return hl_fw_dynamic_wait_for_status(hdev, fw_loader, COMMS_STS_NOOP,
+ fw_loader->cpu_timeout);
+}
+
+/**
+ * hl_fw_dynamic_send_protocol_cmd - send LKD to FW cmd and wait for ACK
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @cmd: LKD to FW cmd code
+ * @size: size of next FW component to be loaded (0 if not necessary)
+ * @wait_ok: if true also wait for OK response from FW
+ * @timeout: timeout for status wait
+ *
+ * @return 0 on success, otherwise non-zero error code
+ *
+ * brief:
+ * when sending protocol command we have the following steps:
+ * - send clear (clear command and verify clear status register)
+ * - send the actual protocol command
+ * - wait for ACK on the protocol command
+ * - send clear
+ * - send NOOP
+ * if, in addition, the specific protocol command should wait for OK then:
+ * - wait for OK
+ * - send clear
+ * - send NOOP
+ *
+ * NOTES:
+ * send clear: this is necessary in order to clear the status register to avoid
+ * leftovers between command
+ * NOOP command: necessary to avoid loop on the clear command by the FW
+ */
+int hl_fw_dynamic_send_protocol_cmd(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ enum comms_cmd cmd, unsigned int size,
+ bool wait_ok, u32 timeout)
+{
+ int rc;
+
+ /* first send clear command to clean former commands */
+ rc = hl_fw_dynamic_send_clear_cmd(hdev, fw_loader);
+
+ /* send the actual command */
+ hl_fw_dynamic_send_cmd(hdev, fw_loader, cmd, size);
+
+ /* wait for ACK for the command */
+ rc = hl_fw_dynamic_wait_for_status(hdev, fw_loader, COMMS_STS_ACK,
+ timeout);
+ if (rc)
+ return rc;
+
+ /* clear command to prepare for NOOP command */
+ rc = hl_fw_dynamic_send_clear_cmd(hdev, fw_loader);
+ if (rc)
+ return rc;
+
+ /* send the actual NOOP command */
+ hl_fw_dynamic_send_cmd(hdev, fw_loader, COMMS_NOOP, 0);
+
+ if (!wait_ok)
+ return 0;
+
+ rc = hl_fw_dynamic_wait_for_status(hdev, fw_loader, COMMS_STS_OK,
+ timeout);
+ if (rc)
+ return rc;
+
+ /* clear command to prepare for NOOP command */
+ rc = hl_fw_dynamic_send_clear_cmd(hdev, fw_loader);
+ if (rc)
+ return rc;
+
+ /* send the actual NOOP command */
+ hl_fw_dynamic_send_cmd(hdev, fw_loader, COMMS_NOOP, 0);
+
+ return 0;
+}
+
+/**
+ * hl_fw_compat_crc32 - CRC compatible with FW
+ *
+ * @data: pointer to the data
+ * @size: size of the data
+ *
+ * @return the CRC32 result
+ *
+ * NOTE: kernel's CRC32 differ's from standard CRC32 calculation.
+ * in order to be aligned we need to flip the bits of both the input
+ * initial CRC and kernel's CRC32 result.
+ * in addition both sides use initial CRC of 0,
+ */
+static u32 hl_fw_compat_crc32(u8 *data, size_t size)
+{
+ return ~crc32_le(~((u32)0), data, size);
+}
+
+/**
+ * hl_fw_dynamic_validate_memory_bound - validate memory bounds for memory
+ * transfer (image or descriptor) between
+ * host and FW
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @addr: device address of memory transfer
+ * @size: memory transter size
+ * @region: PCI memory region
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_dynamic_validate_memory_bound(struct hl_device *hdev,
+ u64 addr, size_t size,
+ struct pci_mem_region *region)
+{
+ u64 end_addr;
+
+ /* now make sure that the memory transfer is within region's bounds */
+ end_addr = addr + size;
+ if (end_addr >= region->region_base + region->region_size) {
+ dev_err(hdev->dev,
+ "dynamic FW load: memory transfer end address out of memory region bounds. addr: %llx\n",
+ end_addr);
+ return -EIO;
+ }
+
+ /*
+ * now make sure memory transfer is within predefined BAR bounds.
+ * this is to make sure we do not need to set the bar (e.g. for DRAM
+ * memory transfers)
+ */
+ if (end_addr >= region->region_base - region->offset_in_bar +
+ region->bar_size) {
+ dev_err(hdev->dev,
+ "FW image beyond PCI BAR bounds\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * hl_fw_dynamic_validate_descriptor - validate FW descriptor
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @fw_desc: the descriptor form FW
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ struct lkd_fw_comms_desc *fw_desc)
+{
+ struct pci_mem_region *region;
+ enum pci_region region_id;
+ size_t data_size;
+ u32 data_crc32;
+ u8 *data_ptr;
+ u64 addr;
+ int rc;
+
+ if (le32_to_cpu(fw_desc->header.magic) != HL_COMMS_DESC_MAGIC) {
+ dev_err(hdev->dev, "Invalid magic for dynamic FW descriptor (%x)\n",
+ fw_desc->header.magic);
+ return -EIO;
+ }
+
+ if (fw_desc->header.version != HL_COMMS_DESC_VER) {
+ dev_err(hdev->dev, "Invalid version for dynamic FW descriptor (%x)\n",
+ fw_desc->header.version);
+ return -EIO;
+ }
+
+ /*
+ * calc CRC32 of data without header.
+ * note that no alignment/stride address issues here as all structures
+ * are 64 bit padded
+ */
+ data_size = sizeof(struct lkd_fw_comms_desc) -
+ sizeof(struct comms_desc_header);
+ data_ptr = (u8 *)fw_desc + sizeof(struct comms_desc_header);
+
+ if (le16_to_cpu(fw_desc->header.size) != data_size) {
+ dev_err(hdev->dev,
+ "Invalid descriptor size 0x%x, expected size 0x%zx\n",
+ le16_to_cpu(fw_desc->header.size), data_size);
+ return -EIO;
+ }
+
+ data_crc32 = hl_fw_compat_crc32(data_ptr, data_size);
+
+ if (data_crc32 != le32_to_cpu(fw_desc->header.crc32)) {
+ dev_err(hdev->dev,
+ "CRC32 mismatch for dynamic FW descriptor (%x:%x)\n",
+ data_crc32, fw_desc->header.crc32);
+ return -EIO;
+ }
+
+ /* find memory region to which to copy the image */
+ addr = le64_to_cpu(fw_desc->img_addr);
+ region_id = hl_get_pci_memory_region(hdev, addr);
+ if ((region_id != PCI_REGION_SRAM) &&
+ ((region_id != PCI_REGION_DRAM))) {
+ dev_err(hdev->dev,
+ "Invalid region to copy FW image address=%llx\n", addr);
+ return -EIO;
+ }
+
+ region = &hdev->pci_mem_region[region_id];
+
+ /* store the region for the copy stage */
+ fw_loader->dynamic_loader.image_region = region;
+
+ /*
+ * here we know that the start address is valid, now make sure that the
+ * image is within region's bounds
+ */
+ rc = hl_fw_dynamic_validate_memory_bound(hdev, addr,
+ fw_loader->dynamic_loader.fw_image_size,
+ region);
+ if (rc) {
+ dev_err(hdev->dev,
+ "invalid mem transfer request for FW image\n");
+ return rc;
+ }
+
+ return 0;
+}
+
+static int hl_fw_dynamic_validate_response(struct hl_device *hdev,
+ struct fw_response *response,
+ struct pci_mem_region *region)
+{
+ u64 device_addr;
+ int rc;
+
+ device_addr = region->region_base + response->ram_offset;
+
+ /*
+ * validate that the descriptor is within region's bounds
+ * Note that as the start address was supplied according to the RAM
+ * type- testing only the end address is enough
+ */
+ rc = hl_fw_dynamic_validate_memory_bound(hdev, device_addr,
+ sizeof(struct lkd_fw_comms_desc),
+ region);
+ return rc;
+}
+
+/**
+ * hl_fw_dynamic_read_and_validate_descriptor - read and validate FW descriptor
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_dynamic_read_and_validate_descriptor(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader)
+{
+ struct lkd_fw_comms_desc *fw_desc;
+ struct pci_mem_region *region;
+ struct fw_response *response;
+ enum pci_region region_id;
+ void __iomem *src;
+ int rc;
+
+ fw_desc = &fw_loader->dynamic_loader.comm_desc;
+ response = &fw_loader->dynamic_loader.response;
+
+ region_id = (response->ram_type == COMMS_SRAM) ?
+ PCI_REGION_SRAM : PCI_REGION_DRAM;
+
+ region = &hdev->pci_mem_region[region_id];
+
+ rc = hl_fw_dynamic_validate_response(hdev, response, region);
+ if (rc) {
+ dev_err(hdev->dev,
+ "invalid mem transfer request for FW descriptor\n");
+ return rc;
+ }
+
+ /* extract address copy the descriptor from */
+ src = hdev->pcie_bar[region->bar_id] + region->offset_in_bar +
+ response->ram_offset;
+ memcpy_fromio(fw_desc, src, sizeof(struct lkd_fw_comms_desc));
+
+ return hl_fw_dynamic_validate_descriptor(hdev, fw_loader, fw_desc);
+}
+
+/**
+ * hl_fw_dynamic_request_descriptor - handshake with CPU to get FW descriptor
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @next_image_size: size to allocate for next FW component
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_dynamic_request_descriptor(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ size_t next_image_size)
+{
+ int rc;
+
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_PREP_DESC,
+ next_image_size, true,
+ fw_loader->cpu_timeout);
+ if (rc)
+ return rc;
+
+ return hl_fw_dynamic_read_and_validate_descriptor(hdev, fw_loader);
+}
+
+/**
+ * hl_fw_dynamic_read_device_fw_version - read FW version to exposed properties
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fwc: the firmware component
+ * @fw_version: fw component's version string
+ */
+static void hl_fw_dynamic_read_device_fw_version(struct hl_device *hdev,
+ enum hl_fw_component fwc,
+ const char *fw_version)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ char *preboot_ver, *boot_ver;
+ char btl_ver[32];
+
+ switch (fwc) {
+ case FW_COMP_BOOT_FIT:
+ strscpy(prop->uboot_ver, fw_version, VERSION_MAX_LEN);
+ boot_ver = extract_fw_ver_from_str(prop->uboot_ver);
+ if (boot_ver) {
+ dev_info(hdev->dev, "boot-fit version %s\n", boot_ver);
+ kfree(boot_ver);
+ }
+
+ break;
+ case FW_COMP_PREBOOT:
+ strscpy(prop->preboot_ver, fw_version, VERSION_MAX_LEN);
+ preboot_ver = strnstr(prop->preboot_ver, "Preboot",
+ VERSION_MAX_LEN);
+ if (preboot_ver && preboot_ver != prop->preboot_ver) {
+ strscpy(btl_ver, prop->preboot_ver,
+ min((int) (preboot_ver - prop->preboot_ver),
+ 31));
+ dev_info(hdev->dev, "%s\n", btl_ver);
+ }
+
+ preboot_ver = extract_fw_ver_from_str(prop->preboot_ver);
+ if (preboot_ver) {
+ dev_info(hdev->dev, "preboot version %s\n",
+ preboot_ver);
+ kfree(preboot_ver);
+ }
+
+ break;
+ default:
+ dev_warn(hdev->dev, "Undefined FW component: %d\n", fwc);
+ return;
+ }
+}
+
+/**
+ * hl_fw_dynamic_copy_image - copy image to memory allocated by the FW
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw: fw descriptor
+ * @fw_loader: managing structure for loading device's FW
+ */
+static int hl_fw_dynamic_copy_image(struct hl_device *hdev,
+ const struct firmware *fw,
+ struct fw_load_mgr *fw_loader)
+{
+ struct lkd_fw_comms_desc *fw_desc;
+ struct pci_mem_region *region;
+ void __iomem *dest;
+ u64 addr;
+ int rc;
+
+ fw_desc = &fw_loader->dynamic_loader.comm_desc;
+ addr = le64_to_cpu(fw_desc->img_addr);
+
+ /* find memory region to which to copy the image */
+ region = fw_loader->dynamic_loader.image_region;
+
+ dest = hdev->pcie_bar[region->bar_id] + region->offset_in_bar +
+ (addr - region->region_base);
+
+ rc = hl_fw_copy_fw_to_device(hdev, fw, dest,
+ fw_loader->boot_fit_img.src_off,
+ fw_loader->boot_fit_img.copy_size);
+
+ return rc;
+}
+
+/**
+ * hl_fw_dynamic_copy_msg - copy msg to memory allocated by the FW
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @msg: message
+ * @fw_loader: managing structure for loading device's FW
+ */
+static int hl_fw_dynamic_copy_msg(struct hl_device *hdev,
+ struct lkd_msg_comms *msg, struct fw_load_mgr *fw_loader)
+{
+ struct lkd_fw_comms_desc *fw_desc;
+ struct pci_mem_region *region;
+ void __iomem *dest;
+ u64 addr;
+ int rc;
+
+ fw_desc = &fw_loader->dynamic_loader.comm_desc;
+ addr = le64_to_cpu(fw_desc->img_addr);
+
+ /* find memory region to which to copy the image */
+ region = fw_loader->dynamic_loader.image_region;
+
+ dest = hdev->pcie_bar[region->bar_id] + region->offset_in_bar +
+ (addr - region->region_base);
+
+ rc = hl_fw_copy_msg_to_device(hdev, msg, dest, 0, 0);
+
+ return rc;
+}
+
+/**
+ * hl_fw_boot_fit_update_state - update internal data structures after boot-fit
+ * is loaded
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @cpu_boot_dev_sts0_reg: register holding CPU boot dev status 0
+ * @cpu_boot_dev_sts1_reg: register holding CPU boot dev status 1
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static void hl_fw_boot_fit_update_state(struct hl_device *hdev,
+ u32 cpu_boot_dev_sts0_reg,
+ u32 cpu_boot_dev_sts1_reg)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+
+ /* Clear reset status since we need to read it again from boot CPU */
+ prop->hard_reset_done_by_fw = false;
+
+ /* Read boot_cpu status bits */
+ if (prop->fw_preboot_cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_ENABLED) {
+ prop->fw_bootfit_cpu_boot_dev_sts0 =
+ RREG32(cpu_boot_dev_sts0_reg);
+
+ if (prop->fw_bootfit_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
prop->hard_reset_done_by_fw = true;
- } else {
- prop->fw_security_status_valid = 0;
+
+ dev_dbg(hdev->dev, "Firmware boot CPU status0 %#x\n",
+ prop->fw_bootfit_cpu_boot_dev_sts0);
}
- dev_dbg(hdev->dev, "Firmware preboot security status %#x\n",
- security_status);
+ if (prop->fw_cpu_boot_dev_sts1_valid) {
+ prop->fw_bootfit_cpu_boot_dev_sts1 =
+ RREG32(cpu_boot_dev_sts1_reg);
- dev_dbg(hdev->dev, "Firmware preboot hard-reset is %s\n",
+ dev_dbg(hdev->dev, "Firmware boot CPU status1 %#x\n",
+ prop->fw_bootfit_cpu_boot_dev_sts1);
+ }
+
+ dev_dbg(hdev->dev, "Firmware boot CPU hard-reset is %s\n",
prop->hard_reset_done_by_fw ? "enabled" : "disabled");
+}
+
+static void hl_fw_dynamic_update_linux_interrupt_if(struct hl_device *hdev)
+{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
+
+ /* Check whether all 3 interrupt interfaces are set, if not use a
+ * single interface
+ */
+ if (!hdev->asic_prop.gic_interrupts_enable &&
+ !(hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN)) {
+ dyn_regs->gic_host_halt_irq = dyn_regs->gic_host_irq_ctrl;
+ dyn_regs->gic_host_ints_irq = dyn_regs->gic_host_irq_ctrl;
+
+ dev_warn(hdev->dev,
+ "Using a single interrupt interface towards cpucp");
+ }
+}
+/**
+ * hl_fw_dynamic_load_image - load FW image using dynamic protocol
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @load_fwc: the FW component to be loaded
+ * @img_ld_timeout: image load timeout
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_dynamic_load_image(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ enum hl_fw_component load_fwc,
+ u32 img_ld_timeout)
+{
+ enum hl_fw_component cur_fwc;
+ const struct firmware *fw;
+ char *fw_name;
+ int rc = 0;
+
+ /*
+ * when loading image we have one of 2 scenarios:
+ * 1. current FW component is preboot and we want to load boot-fit
+ * 2. current FW component is boot-fit and we want to load linux
+ */
+ if (load_fwc == FW_COMP_BOOT_FIT) {
+ cur_fwc = FW_COMP_PREBOOT;
+ fw_name = fw_loader->boot_fit_img.image_name;
+ } else {
+ cur_fwc = FW_COMP_BOOT_FIT;
+ fw_name = fw_loader->linux_img.image_name;
+ }
+
+ /* request FW in order to communicate to FW the size to be allocated */
+ rc = hl_request_fw(hdev, &fw, fw_name);
+ if (rc)
+ return rc;
+
+ /* store the image size for future validation */
+ fw_loader->dynamic_loader.fw_image_size = fw->size;
+
+ rc = hl_fw_dynamic_request_descriptor(hdev, fw_loader, fw->size);
+ if (rc)
+ goto release_fw;
+
+ /* read preboot version */
+ hl_fw_dynamic_read_device_fw_version(hdev, cur_fwc,
+ fw_loader->dynamic_loader.comm_desc.cur_fw_ver);
+
+
+ /* update state according to boot stage */
+ if (cur_fwc == FW_COMP_BOOT_FIT) {
+ struct cpu_dyn_regs *dyn_regs;
+
+ dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs;
+ hl_fw_boot_fit_update_state(hdev,
+ le32_to_cpu(dyn_regs->cpu_boot_dev_sts0),
+ le32_to_cpu(dyn_regs->cpu_boot_dev_sts1));
+ }
+
+ /* copy boot fit to space allocated by FW */
+ rc = hl_fw_dynamic_copy_image(hdev, fw, fw_loader);
+ if (rc)
+ goto release_fw;
- dev_info(hdev->dev, "firmware-level security is %s\n",
- prop->fw_security_disabled ? "disabled" : "enabled");
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_DATA_RDY,
+ 0, true,
+ fw_loader->cpu_timeout);
+ if (rc)
+ goto release_fw;
+
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_EXEC,
+ 0, false,
+ img_ld_timeout);
+release_fw:
+ hl_release_firmware(fw);
+ return rc;
+}
+
+static int hl_fw_dynamic_wait_for_boot_fit_active(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader)
+{
+ struct dynamic_fw_load_mgr *dyn_loader;
+ u32 status;
+ int rc;
+
+ dyn_loader = &fw_loader->dynamic_loader;
+
+ /* Make sure CPU boot-loader is running */
+ rc = hl_poll_timeout(
+ hdev,
+ le32_to_cpu(dyn_loader->comm_desc.cpu_dyn_regs.cpu_boot_status),
+ status,
+ (status == CPU_BOOT_STATUS_NIC_FW_RDY) ||
+ (status == CPU_BOOT_STATUS_READY_TO_BOOT),
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ dyn_loader->wait_for_bl_timeout);
+ if (rc) {
+ dev_err(hdev->dev, "failed to wait for boot\n");
+ return rc;
+ }
+
+ dev_dbg(hdev->dev, "uboot status = %d\n", status);
return 0;
}
-int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
- u32 msg_to_cpu_reg, u32 cpu_msg_status_reg,
- u32 cpu_security_boot_status_reg, u32 boot_err0_reg,
- bool skip_bmc, u32 cpu_timeout, u32 boot_fit_timeout)
+static int hl_fw_dynamic_wait_for_linux_active(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader)
{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct dynamic_fw_load_mgr *dyn_loader;
u32 status;
int rc;
+ dyn_loader = &fw_loader->dynamic_loader;
+
+ /* Make sure CPU boot-loader is running */
+
+ rc = hl_poll_timeout(
+ hdev,
+ le32_to_cpu(dyn_loader->comm_desc.cpu_dyn_regs.cpu_boot_status),
+ status,
+ (status == CPU_BOOT_STATUS_SRAM_AVAIL),
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ fw_loader->cpu_timeout);
+ if (rc) {
+ dev_err(hdev->dev, "failed to wait for Linux\n");
+ return rc;
+ }
+
+ dev_dbg(hdev->dev, "Boot status = %d\n", status);
+ return 0;
+}
+
+/**
+ * hl_fw_linux_update_state - update internal data structures after Linux
+ * is loaded.
+ * Note: Linux initialization is comprised mainly
+ * of two stages - loading kernel (SRAM_AVAIL)
+ * & loading ARMCP.
+ * Therefore reading boot device status in any of
+ * these stages might result in different values.
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @cpu_boot_dev_sts0_reg: register holding CPU boot dev status 0
+ * @cpu_boot_dev_sts1_reg: register holding CPU boot dev status 1
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static void hl_fw_linux_update_state(struct hl_device *hdev,
+ u32 cpu_boot_dev_sts0_reg,
+ u32 cpu_boot_dev_sts1_reg)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+
+ hdev->fw_loader.linux_loaded = true;
+
+ /* Clear reset status since we need to read again from app */
+ prop->hard_reset_done_by_fw = false;
+
+ /* Read FW application security bits */
+ if (prop->fw_cpu_boot_dev_sts0_valid) {
+ prop->fw_app_cpu_boot_dev_sts0 =
+ RREG32(cpu_boot_dev_sts0_reg);
+
+ if (prop->fw_app_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
+ prop->hard_reset_done_by_fw = true;
+
+ if (prop->fw_app_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN)
+ prop->gic_interrupts_enable = false;
+
+ dev_dbg(hdev->dev,
+ "Firmware application CPU status0 %#x\n",
+ prop->fw_app_cpu_boot_dev_sts0);
+
+ dev_dbg(hdev->dev, "GIC controller is %s\n",
+ prop->gic_interrupts_enable ?
+ "enabled" : "disabled");
+ }
+
+ if (prop->fw_cpu_boot_dev_sts1_valid) {
+ prop->fw_app_cpu_boot_dev_sts1 =
+ RREG32(cpu_boot_dev_sts1_reg);
+
+ dev_dbg(hdev->dev,
+ "Firmware application CPU status1 %#x\n",
+ prop->fw_app_cpu_boot_dev_sts1);
+ }
+
+ dev_dbg(hdev->dev, "Firmware application CPU hard-reset is %s\n",
+ prop->hard_reset_done_by_fw ? "enabled" : "disabled");
+
+ dev_info(hdev->dev, "Successfully loaded firmware to device\n");
+}
+
+/**
+ * hl_fw_dynamic_report_reset_cause - send a COMMS message with the cause
+ * of the newly triggered hard reset
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ * @reset_cause: enumerated cause for the recent hard reset
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_dynamic_report_reset_cause(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ enum comms_reset_cause reset_cause)
+{
+ struct lkd_msg_comms msg;
+ int rc;
+
+ memset(&msg, 0, sizeof(msg));
+
+ /* create message to be sent */
+ msg.header.type = HL_COMMS_RESET_CAUSE_TYPE;
+ msg.header.size = cpu_to_le16(sizeof(struct comms_msg_header));
+ msg.header.magic = cpu_to_le32(HL_COMMS_MSG_MAGIC);
+
+ msg.reset_cause = reset_cause;
+
+ rc = hl_fw_dynamic_request_descriptor(hdev, fw_loader,
+ sizeof(struct lkd_msg_comms));
+ if (rc)
+ return rc;
+
+ /* copy message to space allocated by FW */
+ rc = hl_fw_dynamic_copy_msg(hdev, &msg, fw_loader);
+ if (rc)
+ return rc;
+
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_DATA_RDY,
+ 0, true,
+ fw_loader->cpu_timeout);
+ if (rc)
+ return rc;
+
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_EXEC,
+ 0, true,
+ fw_loader->cpu_timeout);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+/**
+ * hl_fw_dynamic_init_cpu - initialize the device CPU using dynamic protocol
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ *
+ * @return 0 on success, otherwise non-zero error code
+ *
+ * brief: the dynamic protocol is master (LKD) slave (FW CPU) protocol.
+ * the communication is done using registers:
+ * - LKD command register
+ * - FW status register
+ * the protocol is race free. this goal is achieved by splitting the requests
+ * and response to known synchronization points between the LKD and the FW.
+ * each response to LKD request is known and bound to a predefined timeout.
+ * in case of timeout expiration without the desired status from FW- the
+ * protocol (and hence the boot) will fail.
+ */
+static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader)
+{
+ struct cpu_dyn_regs *dyn_regs;
+ int rc;
+
+ dev_info(hdev->dev,
+ "Loading firmware to device, may take some time...\n");
+
+ dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs;
+
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_RST_STATE,
+ 0, true,
+ fw_loader->cpu_timeout);
+ if (rc)
+ goto protocol_err;
+
+ if (hdev->curr_reset_cause) {
+ rc = hl_fw_dynamic_report_reset_cause(hdev, fw_loader,
+ hdev->curr_reset_cause);
+ if (rc)
+ goto protocol_err;
+
+ /* Clear current reset cause */
+ hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
+ }
+
+ if (!(hdev->fw_components & FW_TYPE_BOOT_CPU)) {
+ rc = hl_fw_dynamic_request_descriptor(hdev, fw_loader, 0);
+ if (rc)
+ goto protocol_err;
+
+ /* read preboot version */
+ hl_fw_dynamic_read_device_fw_version(hdev, FW_COMP_PREBOOT,
+ fw_loader->dynamic_loader.comm_desc.cur_fw_ver);
+ return 0;
+ }
+
+ /* load boot fit to FW */
+ rc = hl_fw_dynamic_load_image(hdev, fw_loader, FW_COMP_BOOT_FIT,
+ fw_loader->boot_fit_timeout);
+ if (rc) {
+ dev_err(hdev->dev, "failed to load boot fit\n");
+ goto protocol_err;
+ }
+
+ rc = hl_fw_dynamic_wait_for_boot_fit_active(hdev, fw_loader);
+ if (rc)
+ goto protocol_err;
+
+ /* Enable DRAM scrambling before Linux boot and after successful
+ * UBoot
+ */
+ hdev->asic_funcs->init_cpu_scrambler_dram(hdev);
+
+ if (!(hdev->fw_components & FW_TYPE_LINUX)) {
+ dev_info(hdev->dev, "Skip loading Linux F/W\n");
+ return 0;
+ }
+
+ if (fw_loader->skip_bmc) {
+ rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader,
+ COMMS_SKIP_BMC, 0,
+ true,
+ fw_loader->cpu_timeout);
+ if (rc) {
+ dev_err(hdev->dev, "failed to load boot fit\n");
+ goto protocol_err;
+ }
+ }
+
+ /* load Linux image to FW */
+ rc = hl_fw_dynamic_load_image(hdev, fw_loader, FW_COMP_LINUX,
+ fw_loader->cpu_timeout);
+ if (rc) {
+ dev_err(hdev->dev, "failed to load Linux\n");
+ goto protocol_err;
+ }
+
+ rc = hl_fw_dynamic_wait_for_linux_active(hdev, fw_loader);
+ if (rc)
+ goto protocol_err;
+
+ hl_fw_linux_update_state(hdev, le32_to_cpu(dyn_regs->cpu_boot_dev_sts0),
+ le32_to_cpu(dyn_regs->cpu_boot_dev_sts1));
+
+ hl_fw_dynamic_update_linux_interrupt_if(hdev);
+
+ return 0;
+
+protocol_err:
+ fw_read_errors(hdev, le32_to_cpu(dyn_regs->cpu_boot_err0),
+ le32_to_cpu(dyn_regs->cpu_boot_err1),
+ le32_to_cpu(dyn_regs->cpu_boot_dev_sts0),
+ le32_to_cpu(dyn_regs->cpu_boot_dev_sts1));
+ return rc;
+}
+
+/**
+ * hl_fw_static_init_cpu - initialize the device CPU using static protocol
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @fw_loader: managing structure for loading device's FW
+ *
+ * @return 0 on success, otherwise non-zero error code
+ */
+static int hl_fw_static_init_cpu(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader)
+{
+ u32 cpu_msg_status_reg, cpu_timeout, msg_to_cpu_reg, status;
+ u32 cpu_boot_dev_status0_reg, cpu_boot_dev_status1_reg;
+ struct static_fw_load_mgr *static_loader;
+ u32 cpu_boot_status_reg;
+ int rc;
+
if (!(hdev->fw_components & FW_TYPE_BOOT_CPU))
return 0;
+ /* init common loader parameters */
+ cpu_timeout = fw_loader->cpu_timeout;
+
+ /* init static loader parameters */
+ static_loader = &fw_loader->static_loader;
+ cpu_msg_status_reg = static_loader->cpu_cmd_status_to_host_reg;
+ msg_to_cpu_reg = static_loader->kmd_msg_to_cpu_reg;
+ cpu_boot_dev_status0_reg = static_loader->cpu_boot_dev_status0_reg;
+ cpu_boot_dev_status1_reg = static_loader->cpu_boot_dev_status1_reg;
+ cpu_boot_status_reg = static_loader->cpu_boot_status_reg;
+
dev_info(hdev->dev, "Going to wait for device boot (up to %lds)\n",
cpu_timeout / USEC_PER_SEC);
@@ -925,8 +2364,8 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
cpu_boot_status_reg,
status,
status == CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT,
- 10000,
- boot_fit_timeout);
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ fw_loader->boot_fit_timeout);
if (rc) {
dev_dbg(hdev->dev,
@@ -948,8 +2387,8 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
cpu_msg_status_reg,
status,
status == CPU_MSG_OK,
- 10000,
- boot_fit_timeout);
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
+ fw_loader->boot_fit_timeout);
if (rc) {
dev_err(hdev->dev,
@@ -970,33 +2409,17 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
(status == CPU_BOOT_STATUS_NIC_FW_RDY) ||
(status == CPU_BOOT_STATUS_READY_TO_BOOT) ||
(status == CPU_BOOT_STATUS_SRAM_AVAIL),
- 10000,
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
cpu_timeout);
dev_dbg(hdev->dev, "uboot status = %d\n", status);
/* Read U-Boot version now in case we will later fail */
- hdev->asic_funcs->read_device_fw_version(hdev, FW_COMP_UBOOT);
-
- /* Clear reset status since we need to read it again from boot CPU */
- prop->hard_reset_done_by_fw = false;
-
- /* Read boot_cpu security bits */
- if (prop->fw_security_status_valid) {
- prop->fw_boot_cpu_security_map =
- RREG32(cpu_security_boot_status_reg);
-
- if (prop->fw_boot_cpu_security_map &
- CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
- prop->hard_reset_done_by_fw = true;
-
- dev_dbg(hdev->dev,
- "Firmware boot CPU security status %#x\n",
- prop->fw_boot_cpu_security_map);
- }
+ hl_fw_static_read_device_fw_version(hdev, FW_COMP_BOOT_FIT);
- dev_dbg(hdev->dev, "Firmware boot CPU hard-reset is %s\n",
- prop->hard_reset_done_by_fw ? "enabled" : "disabled");
+ /* update state according to boot stage */
+ hl_fw_boot_fit_update_state(hdev, cpu_boot_dev_status0_reg,
+ cpu_boot_dev_status1_reg);
if (rc) {
detect_cpu_boot_status(hdev, status);
@@ -1004,13 +2427,21 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
goto out;
}
+ /* Enable DRAM scrambling before Linux boot and after successful
+ * UBoot
+ */
+ hdev->asic_funcs->init_cpu_scrambler_dram(hdev);
+
if (!(hdev->fw_components & FW_TYPE_LINUX)) {
dev_info(hdev->dev, "Skip loading Linux F/W\n");
+ rc = 0;
goto out;
}
- if (status == CPU_BOOT_STATUS_SRAM_AVAIL)
+ if (status == CPU_BOOT_STATUS_SRAM_AVAIL) {
+ rc = 0;
goto out;
+ }
dev_info(hdev->dev,
"Loading firmware to device, may take some time...\n");
@@ -1019,7 +2450,7 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
if (rc)
goto out;
- if (skip_bmc) {
+ if (fw_loader->skip_bmc) {
WREG32(msg_to_cpu_reg, KMD_MSG_SKIP_BMC);
rc = hl_poll_timeout(
@@ -1027,7 +2458,7 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
cpu_boot_status_reg,
status,
(status == CPU_BOOT_STATUS_BMC_WAITING_SKIPPED),
- 10000,
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
cpu_timeout);
if (rc) {
@@ -1047,7 +2478,7 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
cpu_boot_status_reg,
status,
(status == CPU_BOOT_STATUS_SRAM_AVAIL),
- 10000,
+ FW_CPU_STATUS_POLL_INTERVAL_USEC,
cpu_timeout);
/* Clear message */
@@ -1066,36 +2497,43 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
goto out;
}
- rc = fw_read_errors(hdev, boot_err0_reg, cpu_security_boot_status_reg);
+ rc = fw_read_errors(hdev, fw_loader->static_loader.boot_err0_reg,
+ fw_loader->static_loader.boot_err1_reg,
+ cpu_boot_dev_status0_reg,
+ cpu_boot_dev_status1_reg);
if (rc)
return rc;
- /* Clear reset status since we need to read again from app */
- prop->hard_reset_done_by_fw = false;
-
- /* Read FW application security bits */
- if (prop->fw_security_status_valid) {
- prop->fw_app_security_map =
- RREG32(cpu_security_boot_status_reg);
-
- if (prop->fw_app_security_map &
- CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
- prop->hard_reset_done_by_fw = true;
-
- dev_dbg(hdev->dev,
- "Firmware application CPU security status %#x\n",
- prop->fw_app_security_map);
- }
-
- dev_dbg(hdev->dev, "Firmware application CPU hard-reset is %s\n",
- prop->hard_reset_done_by_fw ? "enabled" : "disabled");
-
- dev_info(hdev->dev, "Successfully loaded firmware to device\n");
+ hl_fw_linux_update_state(hdev, cpu_boot_dev_status0_reg,
+ cpu_boot_dev_status1_reg);
return 0;
out:
- fw_read_errors(hdev, boot_err0_reg, cpu_security_boot_status_reg);
+ fw_read_errors(hdev, fw_loader->static_loader.boot_err0_reg,
+ fw_loader->static_loader.boot_err1_reg,
+ cpu_boot_dev_status0_reg,
+ cpu_boot_dev_status1_reg);
return rc;
}
+
+/**
+ * hl_fw_init_cpu - initialize the device CPU
+ *
+ * @hdev: pointer to the habanalabs device structure
+ *
+ * @return 0 on success, otherwise non-zero error code
+ *
+ * perform necessary initializations for device's CPU. takes into account if
+ * init protocol is static or dynamic.
+ */
+int hl_fw_init_cpu(struct hl_device *hdev)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct fw_load_mgr *fw_loader = &hdev->fw_loader;
+
+ return prop->dynamic_fw_load ?
+ hl_fw_dynamic_init_cpu(hdev, fw_loader) :
+ hl_fw_static_init_cpu(hdev, fw_loader);
+}
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 6579f8767abd..6b3cdd7e068a 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -48,6 +48,7 @@
#define HL_PENDING_RESET_LONG_SEC 60
#define HL_HARD_RESET_MAX_TIMEOUT 120
+#define HL_PLDM_HARD_RESET_MAX_TIMEOUT (HL_HARD_RESET_MAX_TIMEOUT * 3)
#define HL_DEVICE_TIMEOUT_USEC 1000000 /* 1 s */
@@ -115,10 +116,18 @@ enum hl_mmu_page_table_location {
*
* - HL_RESET_HEARTBEAT
* Set if reset is due to heartbeat
+ *
+ * - HL_RESET_TDR
+ * Set if reset is due to TDR
+ *
+ * - HL_RESET_DEVICE_RELEASE
+ * Set if reset is due to device release
*/
#define HL_RESET_HARD (1 << 0)
#define HL_RESET_FROM_RESET_THREAD (1 << 1)
#define HL_RESET_HEARTBEAT (1 << 2)
+#define HL_RESET_TDR (1 << 3)
+#define HL_RESET_DEVICE_RELEASE (1 << 4)
#define HL_MAX_SOBS_PER_MONITOR 8
@@ -178,12 +187,14 @@ enum hl_pci_match_mode {
/**
* enum hl_fw_component - F/W components to read version through registers.
- * @FW_COMP_UBOOT: u-boot.
+ * @FW_COMP_BOOT_FIT: boot fit.
* @FW_COMP_PREBOOT: preboot.
+ * @FW_COMP_LINUX: linux.
*/
enum hl_fw_component {
- FW_COMP_UBOOT,
- FW_COMP_PREBOOT
+ FW_COMP_BOOT_FIT,
+ FW_COMP_PREBOOT,
+ FW_COMP_LINUX,
};
/**
@@ -420,12 +431,24 @@ struct hl_mmu_properties {
* @cb_pool_cb_size: size of each CB in the CB pool.
* @max_pending_cs: maximum of concurrent pending command submissions
* @max_queues: maximum amount of queues in the system
- * @fw_boot_cpu_security_map: bitmap representation of boot cpu security status
- * reported by FW, bit description can be found in
- * CPU_BOOT_DEV_STS*
- * @fw_app_security_map: bitmap representation of application security status
- * reported by FW, bit description can be found in
- * CPU_BOOT_DEV_STS*
+ * @fw_preboot_cpu_boot_dev_sts0: bitmap representation of preboot cpu
+ * capabilities reported by FW, bit description
+ * can be found in CPU_BOOT_DEV_STS0
+ * @fw_preboot_cpu_boot_dev_sts1: bitmap representation of preboot cpu
+ * capabilities reported by FW, bit description
+ * can be found in CPU_BOOT_DEV_STS1
+ * @fw_bootfit_cpu_boot_dev_sts0: bitmap representation of boot cpu security
+ * status reported by FW, bit description can be
+ * found in CPU_BOOT_DEV_STS0
+ * @fw_bootfit_cpu_boot_dev_sts1: bitmap representation of boot cpu security
+ * status reported by FW, bit description can be
+ * found in CPU_BOOT_DEV_STS1
+ * @fw_app_cpu_boot_dev_sts0: bitmap representation of application security
+ * status reported by FW, bit description can be
+ * found in CPU_BOOT_DEV_STS0
+ * @fw_app_cpu_boot_dev_sts1: bitmap representation of application security
+ * status reported by FW, bit description can be
+ * found in CPU_BOOT_DEV_STS1
* @collective_first_sob: first sync object available for collective use
* @collective_first_mon: first monitor available for collective use
* @sync_stream_first_sob: first sync object available for sync stream use
@@ -438,14 +461,19 @@ struct hl_mmu_properties {
* @user_interrupt_count: number of user interrupts.
* @tpc_enabled_mask: which TPCs are enabled.
* @completion_queues_count: number of completion queues.
- * @fw_security_disabled: true if security measures are disabled in firmware,
- * false otherwise
- * @fw_security_status_valid: security status bits are valid and can be fetched
- * from BOOT_DEV_STS0
+ * @fw_security_enabled: true if security measures are enabled in firmware,
+ * false otherwise
+ * @fw_cpu_boot_dev_sts0_valid: status bits are valid and can be fetched from
+ * BOOT_DEV_STS0
+ * @fw_cpu_boot_dev_sts1_valid: status bits are valid and can be fetched from
+ * BOOT_DEV_STS1
* @dram_supports_virtual_memory: is there an MMU towards the DRAM
* @hard_reset_done_by_fw: true if firmware is handling hard reset flow
* @num_functional_hbms: number of functional HBMs in each DCORE.
* @iatu_done_by_fw: true if iATU configuration is being done by FW.
+ * @dynamic_fw_load: is dynamic FW load is supported.
+ * @gic_interrupts_enable: true if FW is not blocking GIC controller,
+ * false otherwise.
*/
struct asic_fixed_properties {
struct hw_queue_properties *hw_queues_props;
@@ -491,8 +519,12 @@ struct asic_fixed_properties {
u32 cb_pool_cb_size;
u32 max_pending_cs;
u32 max_queues;
- u32 fw_boot_cpu_security_map;
- u32 fw_app_security_map;
+ u32 fw_preboot_cpu_boot_dev_sts0;
+ u32 fw_preboot_cpu_boot_dev_sts1;
+ u32 fw_bootfit_cpu_boot_dev_sts0;
+ u32 fw_bootfit_cpu_boot_dev_sts1;
+ u32 fw_app_cpu_boot_dev_sts0;
+ u32 fw_app_cpu_boot_dev_sts1;
u16 collective_first_sob;
u16 collective_first_mon;
u16 sync_stream_first_sob;
@@ -504,12 +536,15 @@ struct asic_fixed_properties {
u16 user_interrupt_count;
u8 tpc_enabled_mask;
u8 completion_queues_count;
- u8 fw_security_disabled;
- u8 fw_security_status_valid;
+ u8 fw_security_enabled;
+ u8 fw_cpu_boot_dev_sts0_valid;
+ u8 fw_cpu_boot_dev_sts1_valid;
u8 dram_supports_virtual_memory;
u8 hard_reset_done_by_fw;
u8 num_functional_hbms;
u8 iatu_done_by_fw;
+ u8 dynamic_fw_load;
+ u8 gic_interrupts_enable;
};
/**
@@ -750,12 +785,19 @@ struct hl_user_pending_interrupt {
* @kernel_address: holds the queue's kernel virtual address
* @bus_address: holds the queue's DMA address
* @ci: ci inside the queue
+ * @prev_eqe_index: the index of the previous event queue entry. The index of
+ * the current entry's index must be +1 of the previous one.
+ * @check_eqe_index: do we need to check the index of the current entry vs. the
+ * previous one. This is for backward compatibility with older
+ * firmwares
*/
struct hl_eq {
struct hl_device *hdev;
void *kernel_address;
dma_addr_t bus_address;
u32 ci;
+ u32 prev_eqe_index;
+ bool check_eqe_index;
};
@@ -812,6 +854,132 @@ enum div_select_defs {
DIV_SEL_DIVIDED_PLL = 3,
};
+enum pci_region {
+ PCI_REGION_CFG,
+ PCI_REGION_SRAM,
+ PCI_REGION_DRAM,
+ PCI_REGION_SP_SRAM,
+ PCI_REGION_NUMBER,
+};
+
+/**
+ * struct pci_mem_region - describe memory region in a PCI bar
+ * @region_base: region base address
+ * @region_size: region size
+ * @bar_size: size of the BAR
+ * @offset_in_bar: region offset into the bar
+ * @bar_id: bar ID of the region
+ * @used: if used 1, otherwise 0
+ */
+struct pci_mem_region {
+ u64 region_base;
+ u64 region_size;
+ u64 bar_size;
+ u32 offset_in_bar;
+ u8 bar_id;
+ u8 used;
+};
+
+/**
+ * struct static_fw_load_mgr - static FW load manager
+ * @preboot_version_max_off: max offset to preboot version
+ * @boot_fit_version_max_off: max offset to boot fit version
+ * @kmd_msg_to_cpu_reg: register address for KDM->CPU messages
+ * @cpu_cmd_status_to_host_reg: register address for CPU command status response
+ * @cpu_boot_status_reg: boot status register
+ * @cpu_boot_dev_status0_reg: boot device status register 0
+ * @cpu_boot_dev_status1_reg: boot device status register 1
+ * @boot_err0_reg: boot error register 0
+ * @boot_err1_reg: boot error register 1
+ * @preboot_version_offset_reg: SRAM offset to preboot version register
+ * @boot_fit_version_offset_reg: SRAM offset to boot fit version register
+ * @sram_offset_mask: mask for getting offset into the SRAM
+ * @cpu_reset_wait_msec: used when setting WFE via kmd_msg_to_cpu_reg
+ */
+struct static_fw_load_mgr {
+ u64 preboot_version_max_off;
+ u64 boot_fit_version_max_off;
+ u32 kmd_msg_to_cpu_reg;
+ u32 cpu_cmd_status_to_host_reg;
+ u32 cpu_boot_status_reg;
+ u32 cpu_boot_dev_status0_reg;
+ u32 cpu_boot_dev_status1_reg;
+ u32 boot_err0_reg;
+ u32 boot_err1_reg;
+ u32 preboot_version_offset_reg;
+ u32 boot_fit_version_offset_reg;
+ u32 sram_offset_mask;
+ u32 cpu_reset_wait_msec;
+};
+
+/**
+ * struct fw_response - FW response to LKD command
+ * @ram_offset: descriptor offset into the RAM
+ * @ram_type: RAM type containing the descriptor (SRAM/DRAM)
+ * @status: command status
+ */
+struct fw_response {
+ u32 ram_offset;
+ u8 ram_type;
+ u8 status;
+};
+
+/**
+ * struct dynamic_fw_load_mgr - dynamic FW load manager
+ * @response: FW to LKD response
+ * @comm_desc: the communication descriptor with FW
+ * @image_region: region to copy the FW image to
+ * @fw_image_size: size of FW image to load
+ * @wait_for_bl_timeout: timeout for waiting for boot loader to respond
+ */
+struct dynamic_fw_load_mgr {
+ struct fw_response response;
+ struct lkd_fw_comms_desc comm_desc;
+ struct pci_mem_region *image_region;
+ size_t fw_image_size;
+ u32 wait_for_bl_timeout;
+};
+
+/**
+ * struct fw_image_props - properties of FW image
+ * @image_name: name of the image
+ * @src_off: offset in src FW to copy from
+ * @copy_size: amount of bytes to copy (0 to copy the whole binary)
+ */
+struct fw_image_props {
+ char *image_name;
+ u32 src_off;
+ u32 copy_size;
+};
+
+/**
+ * struct fw_load_mgr - manager FW loading process
+ * @dynamic_loader: specific structure for dynamic load
+ * @static_loader: specific structure for static load
+ * @boot_fit_img: boot fit image properties
+ * @linux_img: linux image properties
+ * @cpu_timeout: CPU response timeout in usec
+ * @boot_fit_timeout: Boot fit load timeout in usec
+ * @skip_bmc: should BMC be skipped
+ * @sram_bar_id: SRAM bar ID
+ * @dram_bar_id: DRAM bar ID
+ * @linux_loaded: true if linux was loaded so far
+ */
+struct fw_load_mgr {
+ union {
+ struct dynamic_fw_load_mgr dynamic_loader;
+ struct static_fw_load_mgr static_loader;
+ };
+ struct fw_image_props boot_fit_img;
+ struct fw_image_props linux_img;
+ u32 cpu_timeout;
+ u32 boot_fit_timeout;
+ u8 skip_bmc;
+ u8 sram_bar_id;
+ u8 dram_bar_id;
+ u8 linux_loaded;
+};
+
/**
* struct hl_asic_funcs - ASIC specific functions that are can be called from
* common code.
@@ -901,8 +1069,6 @@ enum div_select_defs {
* @ctx_fini: context dependent cleanup.
* @get_clk_rate: Retrieve the ASIC current and maximum clock rate in MHz
* @get_queue_id_for_cq: Get the H/W queue id related to the given CQ index.
- * @read_device_fw_version: read the device's firmware versions that are
- * contained in registers
* @load_firmware_to_device: load the firmware to the device's memory
* @load_boot_fit_to_device: load boot fit to device's memory
* @get_signal_cb_size: Get signal CB size.
@@ -933,6 +1099,8 @@ enum div_select_defs {
* @get_msi_info: Retrieve asic-specific MSI ID of the f/w async event
* @map_pll_idx_to_fw_idx: convert driver specific per asic PLL index to
* generic f/w compatible PLL Indexes
+ * @init_firmware_loader: initialize data for FW loader.
+ * @init_cpu_scrambler_dram: Enable CPU specific DRAM scrambling
*/
struct hl_asic_funcs {
int (*early_init)(struct hl_device *hdev);
@@ -1006,7 +1174,7 @@ struct hl_asic_funcs {
int (*mmu_invalidate_cache)(struct hl_device *hdev, bool is_hard,
u32 flags);
int (*mmu_invalidate_cache_range)(struct hl_device *hdev, bool is_hard,
- u32 asid, u64 va, u64 size);
+ u32 flags, u32 asid, u64 va, u64 size);
int (*send_heartbeat)(struct hl_device *hdev);
void (*set_clock_gating)(struct hl_device *hdev);
void (*disable_clock_gating)(struct hl_device *hdev);
@@ -1030,8 +1198,6 @@ struct hl_asic_funcs {
void (*ctx_fini)(struct hl_ctx *ctx);
int (*get_clk_rate)(struct hl_device *hdev, u32 *cur_clk, u32 *max_clk);
u32 (*get_queue_id_for_cq)(struct hl_device *hdev, u32 cq_idx);
- int (*read_device_fw_version)(struct hl_device *hdev,
- enum hl_fw_component fwc);
int (*load_firmware_to_device)(struct hl_device *hdev);
int (*load_boot_fit_to_device)(struct hl_device *hdev);
u32 (*get_signal_cb_size)(struct hl_device *hdev);
@@ -1056,8 +1222,10 @@ struct hl_asic_funcs {
int (*hw_block_mmap)(struct hl_device *hdev, struct vm_area_struct *vma,
u32 block_id, u32 block_size);
void (*enable_events_from_fw)(struct hl_device *hdev);
- void (*get_msi_info)(u32 *table);
+ void (*get_msi_info)(__le32 *table);
int (*map_pll_idx_to_fw_idx)(u32 pll_idx);
+ void (*init_firmware_loader)(struct hl_device *hdev);
+ void (*init_cpu_scrambler_dram)(struct hl_device *hdev);
};
@@ -1262,6 +1430,7 @@ struct hl_userptr {
* @staged_sequence: the sequence of the staged submission this CS is part of,
* relevant only if staged_cs is set.
* @timeout_jiffies: cs timeout in jiffies.
+ * @submission_time_jiffies: submission time of the cs
* @type: CS_TYPE_*.
* @submitted: true if CS was submitted to H/W.
* @completed: true if CS was completed by device.
@@ -1274,6 +1443,8 @@ struct hl_userptr {
* @staged_first: true if this is the first staged CS and we need to receive
* timeout for this CS.
* @staged_cs: true if this CS is part of a staged submission.
+ * @skip_reset_on_timeout: true if we shall not reset the device in case
+ * timeout occurs (debug scenario).
*/
struct hl_cs {
u16 *jobs_in_queue_cnt;
@@ -1291,6 +1462,7 @@ struct hl_cs {
u64 sequence;
u64 staged_sequence;
u64 timeout_jiffies;
+ u64 submission_time_jiffies;
enum hl_cs_type type;
u8 submitted;
u8 completed;
@@ -1301,6 +1473,7 @@ struct hl_cs {
u8 staged_last;
u8 staged_first;
u8 staged_cs;
+ u8 skip_reset_on_timeout;
};
/**
@@ -1922,7 +2095,7 @@ struct hl_mmu_funcs {
* @kernel_queues: array of hl_hw_queue.
* @cs_mirror_list: CS mirror list for TDR.
* @cs_mirror_lock: protects cs_mirror_list.
- * @kernel_cb_mgr: command buffer manager for creating/destroying/handling CGs.
+ * @kernel_cb_mgr: command buffer manager for creating/destroying/handling CBs.
* @event_queue: event queue for IRQ from CPU-CP.
* @dma_pool: DMA pool for small allocations.
* @cpu_accessible_dma_mem: Host <-> CPU-CP shared memory CPU address.
@@ -1954,6 +2127,8 @@ struct hl_mmu_funcs {
* @aggregated_cs_counters: aggregated cs counters among all contexts
* @mmu_priv: device-specific MMU data.
* @mmu_func: device-related MMU functions.
+ * @fw_loader: FW loader manager.
+ * @pci_mem_region: array of memory regions in the PCI
* @dram_used_mem: current DRAM memory consumption.
* @timeout_jiffies: device CS timeout value.
* @max_power: the max power of the device, as configured by the sysadmin. This
@@ -1968,6 +2143,11 @@ struct hl_mmu_funcs {
* the error will be ignored by the driver during
* device initialization. Mainly used to debug and
* workaround firmware bugs
+ * @last_successful_open_jif: timestamp (jiffies) of the last successful
+ * device open.
+ * @last_open_session_duration_jif: duration (jiffies) of the last device open
+ * session.
+ * @open_counter: number of successful device open operations.
* @in_reset: is device in reset flow.
* @curr_pll_profile: current PLL profile.
* @card_type: Various ASICs have several card types. This indicates the card
@@ -2007,6 +2187,8 @@ struct hl_mmu_funcs {
* @collective_mon_idx: helper index for collective initialization
* @supports_coresight: is CoreSight supported.
* @supports_soft_reset: is soft reset supported.
+ * @allow_external_soft_reset: true if soft reset initiated by user or TDR is
+ * allowed.
* @supports_cb_mapping: is mapping a CB to the device's MMU supported.
* @needs_reset: true if reset_on_lockup is false and device should be reset
* due to lockup.
@@ -2015,6 +2197,14 @@ struct hl_mmu_funcs {
* @device_fini_pending: true if device_fini was called and might be
* waiting for the reset thread to finish
* @supports_staged_submission: true if staged submissions are supported
+ * @curr_reset_cause: saves an enumerated reset cause when a hard reset is
+ * triggered, and cleared after it is shared with preboot.
+ * @skip_reset_on_timeout: Skip device reset if CS has timed out, wait for it to
+ * complete instead.
+ * @device_cpu_is_halted: Flag to indicate whether the device CPU was already
+ * halted. We can't halt it again because the COMMS
+ * protocol will throw an error. Relevant only for
+ * cases where Linux was not loaded to device CPU
*/
struct hl_device {
struct pci_dev *pdev;
@@ -2079,11 +2269,18 @@ struct hl_device {
struct hl_mmu_priv mmu_priv;
struct hl_mmu_funcs mmu_func[MMU_NUM_PGT_LOCATIONS];
+ struct fw_load_mgr fw_loader;
+
+ struct pci_mem_region pci_mem_region[PCI_REGION_NUMBER];
+
atomic64_t dram_used_mem;
u64 timeout_jiffies;
u64 max_power;
u64 clock_gating_mask;
u64 boot_error_status_mask;
+ u64 last_successful_open_jif;
+ u64 last_open_session_duration_jif;
+ u64 open_counter;
atomic_t in_reset;
enum hl_pll_frequency curr_pll_profile;
enum cpucp_card_types card_type;
@@ -2116,11 +2313,15 @@ struct hl_device {
u8 collective_mon_idx;
u8 supports_coresight;
u8 supports_soft_reset;
+ u8 allow_external_soft_reset;
u8 supports_cb_mapping;
u8 needs_reset;
u8 process_kill_trial_cnt;
u8 device_fini_pending;
u8 supports_staged_submission;
+ u8 curr_reset_cause;
+ u8 skip_reset_on_timeout;
+ u8 device_cpu_is_halted;
/* Parameters for bring-up */
u64 nic_ports_mask;
@@ -2138,6 +2339,7 @@ struct hl_device {
u8 rl_enable;
u8 reset_on_preboot_fail;
u8 reset_upon_device_release;
+ u8 reset_if_device_not_idle;
};
@@ -2384,11 +2586,13 @@ void hl_fw_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size,
void *vaddr);
int hl_fw_send_heartbeat(struct hl_device *hdev);
int hl_fw_cpucp_info_get(struct hl_device *hdev,
- u32 cpu_security_boot_status_reg,
- u32 boot_err0_reg);
+ u32 sts_boot_dev_sts0_reg,
+ u32 sts_boot_dev_sts1_reg, u32 boot_err0_reg,
+ u32 boot_err1_reg);
int hl_fw_cpucp_handshake(struct hl_device *hdev,
- u32 cpu_security_boot_status_reg,
- u32 boot_err0_reg);
+ u32 sts_boot_dev_sts0_reg,
+ u32 sts_boot_dev_sts1_reg, u32 boot_err0_reg,
+ u32 boot_err1_reg);
int hl_fw_get_eeprom_data(struct hl_device *hdev, void *data, size_t max_size);
int hl_fw_cpucp_pci_counters_get(struct hl_device *hdev,
struct hl_info_pci_counters *counters);
@@ -2399,14 +2603,17 @@ int get_used_pll_index(struct hl_device *hdev, u32 input_pll_index,
int hl_fw_cpucp_pll_info_get(struct hl_device *hdev, u32 pll_index,
u16 *pll_freq_arr);
int hl_fw_cpucp_power_get(struct hl_device *hdev, u64 *power);
-int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
- u32 msg_to_cpu_reg, u32 cpu_msg_status_reg,
- u32 cpu_security_boot_status_reg, u32 boot_err0_reg,
- bool skip_bmc, u32 cpu_timeout, u32 boot_fit_timeout);
+void hl_fw_ask_hard_reset_without_linux(struct hl_device *hdev);
+void hl_fw_ask_halt_machine_without_linux(struct hl_device *hdev);
+int hl_fw_init_cpu(struct hl_device *hdev);
int hl_fw_read_preboot_status(struct hl_device *hdev, u32 cpu_boot_status_reg,
- u32 cpu_security_boot_status_reg, u32 boot_err0_reg,
- u32 timeout);
-
+ u32 sts_boot_dev_sts0_reg,
+ u32 sts_boot_dev_sts1_reg, u32 boot_err0_reg,
+ u32 boot_err1_reg, u32 timeout);
+int hl_fw_dynamic_send_protocol_cmd(struct hl_device *hdev,
+ struct fw_load_mgr *fw_loader,
+ enum comms_cmd cmd, unsigned int size,
+ bool wait_ok, u32 timeout);
int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3],
bool is_wc[3]);
int hl_pci_elbi_read(struct hl_device *hdev, u64 addr, u32 *data);
@@ -2415,6 +2622,7 @@ int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
struct hl_inbound_pci_region *pci_region);
int hl_pci_set_outbound_region(struct hl_device *hdev,
struct hl_outbound_pci_region *pci_region);
+enum pci_region hl_get_pci_memory_region(struct hl_device *hdev, u64 addr);
int hl_pci_init(struct hl_device *hdev);
void hl_pci_fini(struct hl_device *hdev);
@@ -2443,6 +2651,8 @@ int hl_set_voltage(struct hl_device *hdev,
int hl_set_current(struct hl_device *hdev,
int sensor_index, u32 attr, long value);
void hl_release_pending_user_interrupts(struct hl_device *hdev);
+int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
+ struct hl_hw_sob **hw_sob, u32 count);
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/misc/habanalabs/common/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c
index 64d1530db985..4194cda2d04c 100644
--- a/drivers/misc/habanalabs/common/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/common/habanalabs_drv.c
@@ -29,7 +29,7 @@ static DEFINE_MUTEX(hl_devs_idr_lock);
static int timeout_locked = 30;
static int reset_on_lockup = 1;
-static int memory_scrub = 1;
+static int memory_scrub;
static ulong boot_error_status_mask = ULONG_MAX;
module_param(timeout_locked, int, 0444);
@@ -42,7 +42,7 @@ MODULE_PARM_DESC(reset_on_lockup,
module_param(memory_scrub, int, 0444);
MODULE_PARM_DESC(memory_scrub,
- "Scrub device memory in various states (0 = no, 1 = yes, default yes)");
+ "Scrub device memory in various states (0 = no, 1 = yes, default no)");
module_param(boot_error_status_mask, ulong, 0444);
MODULE_PARM_DESC(boot_error_status_mask,
@@ -187,6 +187,9 @@ int hl_device_open(struct inode *inode, struct file *filp)
hl_debugfs_add_file(hpriv);
+ hdev->open_counter++;
+ hdev->last_successful_open_jif = jiffies;
+
return 0;
out_err:
@@ -264,6 +267,7 @@ static void set_driver_behavior_per_device(struct hl_device *hdev)
hdev->bmc_enable = 1;
hdev->hard_reset_on_fw_events = 1;
hdev->reset_on_preboot_fail = 1;
+ hdev->reset_if_device_not_idle = 1;
hdev->reset_pcilink = 0;
hdev->axi_drain = 0;
@@ -308,10 +312,10 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
}
if (pdev)
- hdev->asic_prop.fw_security_disabled =
- !is_asic_secured(pdev->device);
+ hdev->asic_prop.fw_security_enabled =
+ is_asic_secured(hdev->asic_type);
else
- hdev->asic_prop.fw_security_disabled = true;
+ hdev->asic_prop.fw_security_enabled = false;
/* Assign status description string */
strncpy(hdev->status[HL_DEVICE_STATUS_MALFUNCTION],
@@ -325,11 +329,14 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
hdev->reset_on_lockup = reset_on_lockup;
hdev->memory_scrub = memory_scrub;
hdev->boot_error_status_mask = boot_error_status_mask;
+ hdev->stop_on_err = true;
hdev->pldm = 0;
set_driver_behavior_per_device(hdev);
+ hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
+
if (timeout_locked)
hdev->timeout_jiffies = msecs_to_jiffies(timeout_locked * 1000);
else
@@ -464,6 +471,7 @@ static int hl_pci_probe(struct pci_dev *pdev,
return 0;
disable_device:
+ pci_disable_pcie_error_reporting(pdev);
pci_set_drvdata(pdev, NULL);
destroy_hdev(hdev);
@@ -572,7 +580,11 @@ static struct pci_driver hl_pci_driver = {
.probe = hl_pci_probe,
.remove = hl_pci_remove,
.shutdown = hl_pci_remove,
- .driver.pm = &hl_pm_ops,
+ .driver = {
+ .name = HL_NAME,
+ .pm = &hl_pm_ops,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
.err_handler = &hl_pci_err_handler,
};
diff --git a/drivers/misc/habanalabs/common/habanalabs_ioctl.c b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
index 33841c272eb6..f4dda7b4acdd 100644
--- a/drivers/misc/habanalabs/common/habanalabs_ioctl.c
+++ b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
@@ -95,7 +95,7 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args)
hw_ip.first_available_interrupt_id =
prop->first_available_user_msix_interrupt;
return copy_to_user(out, &hw_ip,
- min((size_t)size, sizeof(hw_ip))) ? -EFAULT : 0;
+ min((size_t) size, sizeof(hw_ip))) ? -EFAULT : 0;
}
static int hw_events_info(struct hl_device *hdev, bool aggregate,
@@ -460,6 +460,24 @@ static int power_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
min((size_t) max_size, sizeof(power_info))) ? -EFAULT : 0;
}
+static int open_stats_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
+{
+ struct hl_device *hdev = hpriv->hdev;
+ u32 max_size = args->return_size;
+ struct hl_open_stats_info open_stats_info = {0};
+ void __user *out = (void __user *) (uintptr_t) args->return_pointer;
+
+ if ((!max_size) || (!out))
+ return -EINVAL;
+
+ open_stats_info.last_open_period_ms = jiffies64_to_msecs(
+ hdev->last_open_session_duration_jif);
+ open_stats_info.open_counter = hdev->open_counter;
+
+ return copy_to_user(out, &open_stats_info,
+ min((size_t) max_size, sizeof(open_stats_info))) ? -EFAULT : 0;
+}
+
static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
struct device *dev)
{
@@ -543,6 +561,9 @@ static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
case HL_INFO_POWER:
return power_info(hpriv, args);
+ case HL_INFO_OPEN_STATS:
+ return open_stats_info(hpriv, args);
+
default:
dev_err(dev, "Invalid request %d\n", args->op);
rc = -ENOTTY;
diff --git a/drivers/misc/habanalabs/common/hw_queue.c b/drivers/misc/habanalabs/common/hw_queue.c
index 173438461835..bcabfdbf1e01 100644
--- a/drivers/misc/habanalabs/common/hw_queue.c
+++ b/drivers/misc/habanalabs/common/hw_queue.c
@@ -410,19 +410,20 @@ static void hw_queue_schedule_job(struct hl_cs_job *job)
ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
}
-static void init_signal_cs(struct hl_device *hdev,
+static int init_signal_cs(struct hl_device *hdev,
struct hl_cs_job *job, struct hl_cs_compl *cs_cmpl)
{
struct hl_sync_stream_properties *prop;
struct hl_hw_sob *hw_sob;
u32 q_idx;
+ int rc = 0;
q_idx = job->hw_queue_id;
prop = &hdev->kernel_queues[q_idx].sync_stream_prop;
hw_sob = &prop->hw_sob[prop->curr_sob_offset];
cs_cmpl->hw_sob = hw_sob;
- cs_cmpl->sob_val = prop->next_sob_val++;
+ cs_cmpl->sob_val = prop->next_sob_val;
dev_dbg(hdev->dev,
"generate signal CB, sob_id: %d, sob val: 0x%x, q_idx: %d\n",
@@ -434,24 +435,9 @@ static void init_signal_cs(struct hl_device *hdev,
hdev->asic_funcs->gen_signal_cb(hdev, job->patched_cb,
cs_cmpl->hw_sob->sob_id, 0, true);
- kref_get(&hw_sob->kref);
+ rc = hl_cs_signal_sob_wraparound_handler(hdev, q_idx, &hw_sob, 1);
- /* check for wraparound */
- if (prop->next_sob_val == HL_MAX_SOB_VAL) {
- /*
- * Decrement as we reached the max value.
- * The release function won't be called here as we've
- * just incremented the refcount.
- */
- kref_put(&hw_sob->kref, hl_sob_reset_error);
- prop->next_sob_val = 1;
- /* only two SOBs are currently in use */
- prop->curr_sob_offset =
- (prop->curr_sob_offset + 1) % HL_RSVD_SOBS;
-
- dev_dbg(hdev->dev, "switched to SOB %d, q_idx: %d\n",
- prop->curr_sob_offset, q_idx);
- }
+ return rc;
}
static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
@@ -504,22 +490,25 @@ static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
*
* H/W queues spinlock should be taken before calling this function
*/
-static void init_signal_wait_cs(struct hl_cs *cs)
+static int init_signal_wait_cs(struct hl_cs *cs)
{
struct hl_ctx *ctx = cs->ctx;
struct hl_device *hdev = ctx->hdev;
struct hl_cs_job *job;
struct hl_cs_compl *cs_cmpl =
container_of(cs->fence, struct hl_cs_compl, base_fence);
+ int rc = 0;
/* There is only one job in a signal/wait CS */
job = list_first_entry(&cs->job_list, struct hl_cs_job,
cs_node);
if (cs->type & CS_TYPE_SIGNAL)
- init_signal_cs(hdev, job, cs_cmpl);
+ rc = init_signal_cs(hdev, job, cs_cmpl);
else if (cs->type & CS_TYPE_WAIT)
init_wait_cs(hdev, cs, job, cs_cmpl);
+
+ return rc;
}
/*
@@ -590,11 +579,16 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
}
}
- if ((cs->type == CS_TYPE_SIGNAL) || (cs->type == CS_TYPE_WAIT))
- init_signal_wait_cs(cs);
- else if (cs->type == CS_TYPE_COLLECTIVE_WAIT)
+ if ((cs->type == CS_TYPE_SIGNAL) || (cs->type == CS_TYPE_WAIT)) {
+ rc = init_signal_wait_cs(cs);
+ if (rc) {
+ dev_err(hdev->dev, "Failed to submit signal cs\n");
+ goto unroll_cq_resv;
+ }
+ } else if (cs->type == CS_TYPE_COLLECTIVE_WAIT)
hdev->asic_funcs->collective_wait_init_cs(cs);
+
spin_lock(&hdev->cs_mirror_lock);
/* Verify staged CS exists and add to the staged list */
diff --git a/drivers/misc/habanalabs/common/irq.c b/drivers/misc/habanalabs/common/irq.c
index 27129868c711..39b14a933393 100644
--- a/drivers/misc/habanalabs/common/irq.c
+++ b/drivers/misc/habanalabs/common/irq.c
@@ -207,17 +207,33 @@ irqreturn_t hl_irq_handler_eq(int irq, void *arg)
struct hl_eq_entry *eq_entry;
struct hl_eq_entry *eq_base;
struct hl_eqe_work *handle_eqe_work;
+ bool entry_ready;
+ u32 cur_eqe;
+ u16 cur_eqe_index;
eq_base = eq->kernel_address;
while (1) {
- bool entry_ready =
- ((le32_to_cpu(eq_base[eq->ci].hdr.ctl) &
- EQ_CTL_READY_MASK) >> EQ_CTL_READY_SHIFT);
+ cur_eqe = le32_to_cpu(eq_base[eq->ci].hdr.ctl);
+ entry_ready = !!FIELD_GET(EQ_CTL_READY_MASK, cur_eqe);
if (!entry_ready)
break;
+ cur_eqe_index = FIELD_GET(EQ_CTL_INDEX_MASK, cur_eqe);
+ if ((hdev->event_queue.check_eqe_index) &&
+ (((eq->prev_eqe_index + 1) & EQ_CTL_INDEX_MASK)
+ != cur_eqe_index)) {
+ dev_dbg(hdev->dev,
+ "EQE 0x%x in queue is ready but index does not match %d!=%d",
+ eq_base[eq->ci].hdr.ctl,
+ ((eq->prev_eqe_index + 1) & EQ_CTL_INDEX_MASK),
+ cur_eqe_index);
+ break;
+ }
+
+ eq->prev_eqe_index++;
+
eq_entry = &eq_base[eq->ci];
/*
@@ -341,6 +357,7 @@ int hl_eq_init(struct hl_device *hdev, struct hl_eq *q)
q->hdev = hdev;
q->kernel_address = p;
q->ci = 0;
+ q->prev_eqe_index = 0;
return 0;
}
@@ -365,6 +382,7 @@ void hl_eq_fini(struct hl_device *hdev, struct hl_eq *q)
void hl_eq_reset(struct hl_device *hdev, struct hl_eq *q)
{
q->ci = 0;
+ q->prev_eqe_index = 0;
/*
* It's not enough to just reset the PI/CI because the H/W may have
diff --git a/drivers/misc/habanalabs/common/memory.c b/drivers/misc/habanalabs/common/memory.c
index 2938cbbafbbc..af339ce1ab4f 100644
--- a/drivers/misc/habanalabs/common/memory.c
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -570,8 +570,10 @@ static u64 get_va_block(struct hl_device *hdev,
if ((is_align_pow_2 && (hint_addr & (va_block_align - 1))) ||
(!is_align_pow_2 &&
do_div(tmp_hint_addr, va_range->page_size))) {
- dev_info(hdev->dev, "Hint address 0x%llx will be ignored\n",
- hint_addr);
+
+ dev_dbg(hdev->dev,
+ "Hint address 0x%llx will be ignored because it is not aligned\n",
+ hint_addr);
hint_addr = 0;
}
@@ -1117,7 +1119,8 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
goto map_err;
}
- rc = hdev->asic_funcs->mmu_invalidate_cache(hdev, false, *vm_type);
+ rc = hdev->asic_funcs->mmu_invalidate_cache_range(hdev, false,
+ *vm_type, ctx->asid, ret_vaddr, phys_pg_pack->total_size);
mutex_unlock(&ctx->mmu_lock);
@@ -1261,8 +1264,9 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
* at the loop end rather than for each iteration
*/
if (!ctx_free)
- rc = hdev->asic_funcs->mmu_invalidate_cache(hdev, true,
- *vm_type);
+ rc = hdev->asic_funcs->mmu_invalidate_cache_range(hdev, true,
+ *vm_type, ctx->asid, vaddr,
+ phys_pg_pack->total_size);
mutex_unlock(&ctx->mmu_lock);
@@ -1369,12 +1373,7 @@ int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma)
/* Driver only allows mapping of a complete HW block */
block_size = vma->vm_end - vma->vm_start;
-#ifdef _HAS_TYPE_ARG_IN_ACCESS_OK
- if (!access_ok(VERIFY_WRITE,
- (void __user *) (uintptr_t) vma->vm_start, block_size)) {
-#else
if (!access_ok((void __user *) (uintptr_t) vma->vm_start, block_size)) {
-#endif
dev_err(hdev->dev,
"user pointer is invalid - 0x%lx\n",
vma->vm_start);
@@ -1608,7 +1607,8 @@ static int get_user_memory(struct hl_device *hdev, u64 addr, u64 size,
if (rc != npages) {
dev_err(hdev->dev,
- "Failed to map host memory, user ptr probably wrong\n");
+ "Failed (%d) to pin host memory with user ptr 0x%llx, size 0x%llx, npages %d\n",
+ rc, addr, size, npages);
if (rc < 0)
goto destroy_pages;
npages = rc;
diff --git a/drivers/misc/habanalabs/common/mmu/mmu.c b/drivers/misc/habanalabs/common/mmu/mmu.c
index b37189956b14..792d25b79ea6 100644
--- a/drivers/misc/habanalabs/common/mmu/mmu.c
+++ b/drivers/misc/habanalabs/common/mmu/mmu.c
@@ -501,12 +501,20 @@ static void hl_mmu_pa_page_with_offset(struct hl_ctx *ctx, u64 virt_addr,
if ((hops->range_type == HL_VA_RANGE_TYPE_DRAM) &&
!is_power_of_2(prop->dram_page_size)) {
- u32 bit;
+ unsigned long dram_page_size = prop->dram_page_size;
u64 page_offset_mask;
u64 phys_addr_mask;
+ u32 bit;
- bit = __ffs64((u64)prop->dram_page_size);
- page_offset_mask = ((1ull << bit) - 1);
+ /*
+ * find last set bit in page_size to cover all bits of page
+ * offset. note that 1 has to be added to bit index.
+ * note that the internal ulong variable is used to avoid
+ * alignment issue.
+ */
+ bit = find_last_bit(&dram_page_size,
+ sizeof(dram_page_size) * BITS_PER_BYTE) + 1;
+ page_offset_mask = (BIT_ULL(bit) - 1);
phys_addr_mask = ~page_offset_mask;
*phys_addr = (tmp_phys_addr & phys_addr_mask) |
(virt_addr & page_offset_mask);
diff --git a/drivers/misc/habanalabs/common/pci/pci.c b/drivers/misc/habanalabs/common/pci/pci.c
index e941b7eef346..d5bedf5ba011 100644
--- a/drivers/misc/habanalabs/common/pci/pci.c
+++ b/drivers/misc/habanalabs/common/pci/pci.c
@@ -10,7 +10,7 @@
#include <linux/pci.h>
-#define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC (HL_PCI_ELBI_TIMEOUT_MSEC * 10)
+#define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC (HL_PCI_ELBI_TIMEOUT_MSEC * 100)
#define IATU_REGION_CTRL_REGION_EN_MASK BIT(31)
#define IATU_REGION_CTRL_MATCH_MODE_MASK BIT(30)
@@ -360,6 +360,32 @@ int hl_pci_set_outbound_region(struct hl_device *hdev,
}
/**
+ * hl_get_pci_memory_region() - get PCI region for given address
+ * @hdev: Pointer to hl_device structure.
+ * @addr: device address
+ *
+ * @return region index on success, otherwise PCI_REGION_NUMBER (invalid
+ * region index)
+ */
+enum pci_region hl_get_pci_memory_region(struct hl_device *hdev, u64 addr)
+{
+ int i;
+
+ for (i = 0 ; i < PCI_REGION_NUMBER ; i++) {
+ struct pci_mem_region *region = &hdev->pci_mem_region[i];
+
+ if (!region->used)
+ continue;
+
+ if ((addr >= region->region_base) &&
+ (addr < region->region_base + region->region_size))
+ return i;
+ }
+
+ return PCI_REGION_NUMBER;
+}
+
+/**
* hl_pci_init() - PCI initialization code.
* @hdev: Pointer to hl_device structure.
*
@@ -395,6 +421,12 @@ int hl_pci_init(struct hl_device *hdev)
goto unmap_pci_bars;
}
+ /* Driver must sleep in order for FW to finish the iATU configuration */
+ if (hdev->asic_prop.iatu_done_by_fw) {
+ usleep_range(2000, 3000);
+ hdev->asic_funcs->set_dma_mask_from_fw(hdev);
+ }
+
rc = dma_set_mask_and_coherent(&pdev->dev,
DMA_BIT_MASK(hdev->dma_mask));
if (rc) {
diff --git a/drivers/misc/habanalabs/common/sysfs.c b/drivers/misc/habanalabs/common/sysfs.c
index c9f649b31e3a..db72df282ef8 100644
--- a/drivers/misc/habanalabs/common/sysfs.c
+++ b/drivers/misc/habanalabs/common/sysfs.c
@@ -208,7 +208,7 @@ static ssize_t soft_reset_store(struct device *dev,
goto out;
}
- if (!hdev->supports_soft_reset) {
+ if (!hdev->allow_external_soft_reset) {
dev_err(hdev->dev, "Device does not support soft-reset\n");
goto out;
}
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 9e4a6bb3acd1..aa8a0ca5aca2 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -78,6 +78,7 @@
#define GAUDI_PLDM_TPC_KERNEL_WAIT_USEC (HL_DEVICE_TIMEOUT_USEC * 30)
#define GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC 1000000 /* 1s */
#define GAUDI_MSG_TO_CPU_TIMEOUT_USEC 4000000 /* 4s */
+#define GAUDI_WAIT_FOR_BL_TIMEOUT_USEC 15000000 /* 15s */
#define GAUDI_QMAN0_FENCE_VAL 0x72E91AB9
@@ -409,7 +410,7 @@ static inline void set_default_power_values(struct hl_device *hdev)
}
}
-static int gaudi_get_fixed_properties(struct hl_device *hdev)
+static int gaudi_set_fixed_properties(struct hl_device *hdev)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
u32 num_sync_stream_queues = 0;
@@ -545,8 +546,10 @@ static int gaudi_get_fixed_properties(struct hl_device *hdev)
for (i = 0 ; i < HL_MAX_DCORES ; i++)
prop->first_available_cq[i] = USHRT_MAX;
- prop->fw_security_status_valid = false;
+ prop->fw_cpu_boot_dev_sts0_valid = false;
+ prop->fw_cpu_boot_dev_sts1_valid = false;
prop->hard_reset_done_by_fw = false;
+ prop->gic_interrupts_enable = true;
return 0;
}
@@ -577,6 +580,9 @@ static u64 gaudi_set_hbm_bar_base(struct hl_device *hdev, u64 addr)
if ((gaudi) && (gaudi->hbm_bar_cur_addr == addr))
return old_addr;
+ if (hdev->asic_prop.iatu_done_by_fw)
+ return U64_MAX;
+
/* Inbound Region 2 - Bar 4 - Point to HBM */
pci_region.mode = PCI_BAR_MATCH_MODE;
pci_region.bar = HBM_BAR_ID;
@@ -599,10 +605,8 @@ static int gaudi_init_iatu(struct hl_device *hdev)
struct hl_outbound_pci_region outbound_region;
int rc;
- if (hdev->asic_prop.iatu_done_by_fw) {
- hdev->asic_funcs->set_dma_mask_from_fw(hdev);
+ if (hdev->asic_prop.iatu_done_by_fw)
return 0;
- }
/* Inbound Region 0 - Bar 0 - Point to SRAM + CFG */
inbound_region.mode = PCI_BAR_MATCH_MODE;
@@ -651,9 +655,9 @@ static int gaudi_early_init(struct hl_device *hdev)
u32 fw_boot_status;
int rc;
- rc = gaudi_get_fixed_properties(hdev);
+ rc = gaudi_set_fixed_properties(hdev);
if (rc) {
- dev_err(hdev->dev, "Failed to get fixed properties\n");
+ dev_err(hdev->dev, "Failed setting fixed properties\n");
return rc;
}
@@ -683,8 +687,14 @@ static int gaudi_early_init(struct hl_device *hdev)
prop->dram_pci_bar_size = pci_resource_len(pdev, HBM_BAR_ID);
/* If FW security is enabled at this point it means no access to ELBI */
- if (!hdev->asic_prop.fw_security_disabled) {
+ if (hdev->asic_prop.fw_security_enabled) {
hdev->asic_prop.iatu_done_by_fw = true;
+
+ /*
+ * GIC-security-bit can ONLY be set by CPUCP, so in this stage
+ * decision can only be taken based on PCI ID security.
+ */
+ hdev->asic_prop.gic_interrupts_enable = false;
goto pci_init;
}
@@ -707,8 +717,10 @@ pci_init:
* version to determine whether we run with a security-enabled firmware
*/
rc = hl_fw_read_preboot_status(hdev, mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS,
- mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0,
- GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC);
+ mmCPU_BOOT_DEV_STS0,
+ mmCPU_BOOT_DEV_STS1, mmCPU_BOOT_ERR0,
+ mmCPU_BOOT_ERR1,
+ GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC);
if (rc) {
if (hdev->reset_on_preboot_fail)
hdev->asic_funcs->hw_fini(hdev, true);
@@ -751,7 +763,14 @@ static int gaudi_fetch_psoc_frequency(struct hl_device *hdev)
u16 pll_freq_arr[HL_PLL_NUM_OUTPUTS], freq;
int rc;
- if (hdev->asic_prop.fw_security_disabled) {
+ if (hdev->asic_prop.fw_security_enabled) {
+ rc = hl_fw_cpucp_pll_info_get(hdev, HL_GAUDI_CPU_PLL, pll_freq_arr);
+
+ if (rc)
+ return rc;
+
+ freq = pll_freq_arr[2];
+ } else {
/* Backward compatibility */
div_fctr = RREG32(mmPSOC_CPU_PLL_DIV_FACTOR_2);
div_sel = RREG32(mmPSOC_CPU_PLL_DIV_SEL_2);
@@ -779,13 +798,6 @@ static int gaudi_fetch_psoc_frequency(struct hl_device *hdev)
div_sel);
freq = 0;
}
- } else {
- rc = hl_fw_cpucp_pll_info_get(hdev, HL_GAUDI_CPU_PLL, pll_freq_arr);
-
- if (rc)
- return rc;
-
- freq = pll_freq_arr[2];
}
prop->psoc_timestamp_frequency = freq;
@@ -988,9 +1000,27 @@ static void gaudi_sob_group_reset_error(struct kref *ref)
hw_sob_group->base_sob_id);
}
+static void gaudi_collective_mstr_sob_mask_set(struct gaudi_device *gaudi)
+{
+ struct gaudi_collective_properties *prop;
+ int i;
+
+ prop = &gaudi->collective_props;
+
+ memset(prop->mstr_sob_mask, 0, sizeof(prop->mstr_sob_mask));
+
+ for (i = 0 ; i < NIC_NUMBER_OF_ENGINES ; i++)
+ if (gaudi->hw_cap_initialized & BIT(HW_CAP_NIC_SHIFT + i))
+ prop->mstr_sob_mask[i / HL_MAX_SOBS_PER_MONITOR] |=
+ BIT(i % HL_MAX_SOBS_PER_MONITOR);
+ /* Set collective engine bit */
+ prop->mstr_sob_mask[i / HL_MAX_SOBS_PER_MONITOR] |=
+ BIT(i % HL_MAX_SOBS_PER_MONITOR);
+}
+
static int gaudi_collective_init(struct hl_device *hdev)
{
- u32 i, master_monitor_sobs, sob_id, reserved_sobs_per_group;
+ u32 i, sob_id, reserved_sobs_per_group;
struct gaudi_collective_properties *prop;
struct gaudi_device *gaudi;
@@ -1016,22 +1046,7 @@ static int gaudi_collective_init(struct hl_device *hdev)
gaudi_collective_map_sobs(hdev, i);
}
- prop->mstr_sob_mask[0] = 0;
- master_monitor_sobs = HL_MAX_SOBS_PER_MONITOR;
- for (i = 0 ; i < master_monitor_sobs ; i++)
- if (gaudi->hw_cap_initialized & BIT(HW_CAP_NIC_SHIFT + i))
- prop->mstr_sob_mask[0] |= BIT(i);
-
- prop->mstr_sob_mask[1] = 0;
- master_monitor_sobs =
- NIC_NUMBER_OF_ENGINES - HL_MAX_SOBS_PER_MONITOR;
- for (i = 0 ; i < master_monitor_sobs; i++) {
- if (gaudi->hw_cap_initialized & BIT(HW_CAP_NIC_SHIFT + i))
- prop->mstr_sob_mask[1] |= BIT(i);
- }
-
- /* Set collective engine bit */
- prop->mstr_sob_mask[1] |= BIT(i);
+ gaudi_collective_mstr_sob_mask_set(gaudi);
return 0;
}
@@ -1513,7 +1528,7 @@ static int gaudi_alloc_cpu_accessible_dma_mem(struct hl_device *hdev)
hdev->cpu_pci_msb_addr =
GAUDI_CPU_PCI_MSB_ADDR(hdev->cpu_accessible_dma_address);
- if (hdev->asic_prop.fw_security_disabled)
+ if (!hdev->asic_prop.fw_security_enabled)
GAUDI_PCI_TO_CPU_ADDR(hdev->cpu_accessible_dma_address);
free_dma_mem_arr:
@@ -1590,6 +1605,48 @@ free_internal_qmans_pq_mem:
return rc;
}
+static void gaudi_set_pci_memory_regions(struct hl_device *hdev)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct pci_mem_region *region;
+
+ /* CFG */
+ region = &hdev->pci_mem_region[PCI_REGION_CFG];
+ region->region_base = CFG_BASE;
+ region->region_size = CFG_SIZE;
+ region->offset_in_bar = CFG_BASE - SPI_FLASH_BASE_ADDR;
+ region->bar_size = CFG_BAR_SIZE;
+ region->bar_id = CFG_BAR_ID;
+ region->used = 1;
+
+ /* SRAM */
+ region = &hdev->pci_mem_region[PCI_REGION_SRAM];
+ region->region_base = SRAM_BASE_ADDR;
+ region->region_size = SRAM_SIZE;
+ region->offset_in_bar = 0;
+ region->bar_size = SRAM_BAR_SIZE;
+ region->bar_id = SRAM_BAR_ID;
+ region->used = 1;
+
+ /* DRAM */
+ region = &hdev->pci_mem_region[PCI_REGION_DRAM];
+ region->region_base = DRAM_PHYS_BASE;
+ region->region_size = hdev->asic_prop.dram_size;
+ region->offset_in_bar = 0;
+ region->bar_size = prop->dram_pci_bar_size;
+ region->bar_id = HBM_BAR_ID;
+ region->used = 1;
+
+ /* SP SRAM */
+ region = &hdev->pci_mem_region[PCI_REGION_SP_SRAM];
+ region->region_base = PSOC_SCRATCHPAD_ADDR;
+ region->region_size = PSOC_SCRATCHPAD_SIZE;
+ region->offset_in_bar = PSOC_SCRATCHPAD_ADDR - SPI_FLASH_BASE_ADDR;
+ region->bar_size = CFG_BAR_SIZE;
+ region->bar_id = CFG_BAR_ID;
+ region->used = 1;
+}
+
static int gaudi_sw_init(struct hl_device *hdev)
{
struct gaudi_device *gaudi;
@@ -1664,12 +1721,14 @@ static int gaudi_sw_init(struct hl_device *hdev)
hdev->supports_coresight = true;
hdev->supports_staged_submission = true;
+ gaudi_set_pci_memory_regions(hdev);
+
return 0;
free_cpu_accessible_dma_pool:
gen_pool_destroy(hdev->cpu_accessible_dma_pool);
free_cpu_dma_mem:
- if (hdev->asic_prop.fw_security_disabled)
+ if (!hdev->asic_prop.fw_security_enabled)
GAUDI_CPU_TO_PCI_ADDR(hdev->cpu_accessible_dma_address,
hdev->cpu_pci_msb_addr);
hdev->asic_funcs->asic_dma_free_coherent(hdev,
@@ -1691,7 +1750,7 @@ static int gaudi_sw_fini(struct hl_device *hdev)
gen_pool_destroy(hdev->cpu_accessible_dma_pool);
- if (hdev->asic_prop.fw_security_disabled)
+ if (!hdev->asic_prop.fw_security_enabled)
GAUDI_CPU_TO_PCI_ADDR(hdev->cpu_accessible_dma_address,
hdev->cpu_pci_msb_addr);
@@ -1879,12 +1938,11 @@ static void gaudi_init_scrambler_sram(struct hl_device *hdev)
{
struct gaudi_device *gaudi = hdev->asic_specific;
- if (!hdev->asic_prop.fw_security_disabled)
+ if (hdev->asic_prop.fw_security_enabled)
return;
- if (hdev->asic_prop.fw_security_status_valid &&
- (hdev->asic_prop.fw_app_security_map &
- CPU_BOOT_DEV_STS0_SRAM_SCR_EN))
+ if (hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_SRAM_SCR_EN)
return;
if (gaudi->hw_cap_initialized & HW_CAP_SRAM_SCRAMBLER)
@@ -1951,12 +2009,11 @@ static void gaudi_init_scrambler_hbm(struct hl_device *hdev)
{
struct gaudi_device *gaudi = hdev->asic_specific;
- if (!hdev->asic_prop.fw_security_disabled)
+ if (hdev->asic_prop.fw_security_enabled)
return;
- if (hdev->asic_prop.fw_security_status_valid &&
- (hdev->asic_prop.fw_boot_cpu_security_map &
- CPU_BOOT_DEV_STS0_DRAM_SCR_EN))
+ if (hdev->asic_prop.fw_bootfit_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_DRAM_SCR_EN)
return;
if (gaudi->hw_cap_initialized & HW_CAP_HBM_SCRAMBLER)
@@ -2021,12 +2078,11 @@ static void gaudi_init_scrambler_hbm(struct hl_device *hdev)
static void gaudi_init_e2e(struct hl_device *hdev)
{
- if (!hdev->asic_prop.fw_security_disabled)
+ if (hdev->asic_prop.fw_security_enabled)
return;
- if (hdev->asic_prop.fw_security_status_valid &&
- (hdev->asic_prop.fw_boot_cpu_security_map &
- CPU_BOOT_DEV_STS0_E2E_CRED_EN))
+ if (hdev->asic_prop.fw_bootfit_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_E2E_CRED_EN)
return;
WREG32(mmSIF_RTR_CTRL_0_E2E_HBM_WR_SIZE, 247 >> 3);
@@ -2396,12 +2452,11 @@ static void gaudi_init_hbm_cred(struct hl_device *hdev)
{
uint32_t hbm0_wr, hbm1_wr, hbm0_rd, hbm1_rd;
- if (!hdev->asic_prop.fw_security_disabled)
+ if (hdev->asic_prop.fw_security_enabled)
return;
- if (hdev->asic_prop.fw_security_status_valid &&
- (hdev->asic_prop.fw_boot_cpu_security_map &
- CPU_BOOT_DEV_STS0_HBM_CRED_EN))
+ if (hdev->asic_prop.fw_bootfit_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_HBM_CRED_EN)
return;
hbm0_wr = 0x33333333;
@@ -2487,10 +2542,12 @@ static void gaudi_init_golden_registers(struct hl_device *hdev)
static void gaudi_init_pci_dma_qman(struct hl_device *hdev, int dma_id,
int qman_id, dma_addr_t qman_pq_addr)
{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
u32 mtr_base_en_lo, mtr_base_en_hi, mtr_base_ws_lo, mtr_base_ws_hi;
u32 so_base_en_lo, so_base_en_hi, so_base_ws_lo, so_base_ws_hi;
u32 q_off, dma_qm_offset;
- u32 dma_qm_err_cfg;
+ u32 dma_qm_err_cfg, irq_handler_offset;
dma_qm_offset = dma_id * DMA_QMAN_OFFSET;
@@ -2539,20 +2596,23 @@ static void gaudi_init_pci_dma_qman(struct hl_device *hdev, int dma_id,
/* The following configuration is needed only once per QMAN */
if (qman_id == 0) {
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_dma_qm_irq_ctrl);
+
/* Configure RAZWI IRQ */
dma_qm_err_cfg = PCI_DMA_QMAN_GLBL_ERR_CFG_MSG_EN_MASK;
- if (hdev->stop_on_err) {
+ if (hdev->stop_on_err)
dma_qm_err_cfg |=
PCI_DMA_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK;
- }
WREG32(mmDMA0_QM_GLBL_ERR_CFG + dma_qm_offset, dma_qm_err_cfg);
+
WREG32(mmDMA0_QM_GLBL_ERR_ADDR_LO + dma_qm_offset,
- lower_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ lower_32_bits(CFG_BASE + irq_handler_offset));
WREG32(mmDMA0_QM_GLBL_ERR_ADDR_HI + dma_qm_offset,
- upper_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ upper_32_bits(CFG_BASE + irq_handler_offset));
+
WREG32(mmDMA0_QM_GLBL_ERR_WDATA + dma_qm_offset,
gaudi_irq_map_table[GAUDI_EVENT_DMA0_QM].cpu_id +
dma_id);
@@ -2573,8 +2633,11 @@ static void gaudi_init_pci_dma_qman(struct hl_device *hdev, int dma_id,
static void gaudi_init_dma_core(struct hl_device *hdev, int dma_id)
{
- u32 dma_offset = dma_id * DMA_CORE_OFFSET;
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
u32 dma_err_cfg = 1 << DMA0_CORE_ERR_CFG_ERR_MSG_EN_SHIFT;
+ u32 dma_offset = dma_id * DMA_CORE_OFFSET;
+ u32 irq_handler_offset;
/* Set to maximum possible according to physical size */
WREG32(mmDMA0_CORE_RD_MAX_OUTSTAND + dma_offset, 0);
@@ -2588,10 +2651,16 @@ static void gaudi_init_dma_core(struct hl_device *hdev, int dma_id)
dma_err_cfg |= 1 << DMA0_CORE_ERR_CFG_STOP_ON_ERR_SHIFT;
WREG32(mmDMA0_CORE_ERR_CFG + dma_offset, dma_err_cfg);
+
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_dma_core_irq_ctrl);
+
WREG32(mmDMA0_CORE_ERRMSG_ADDR_LO + dma_offset,
- lower_32_bits(CFG_BASE + mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ lower_32_bits(CFG_BASE + irq_handler_offset));
WREG32(mmDMA0_CORE_ERRMSG_ADDR_HI + dma_offset,
- upper_32_bits(CFG_BASE + mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ upper_32_bits(CFG_BASE + irq_handler_offset));
+
WREG32(mmDMA0_CORE_ERRMSG_WDATA + dma_offset,
gaudi_irq_map_table[GAUDI_EVENT_DMA0_CORE].cpu_id + dma_id);
WREG32(mmDMA0_CORE_PROT + dma_offset,
@@ -2654,10 +2723,12 @@ static void gaudi_init_pci_dma_qmans(struct hl_device *hdev)
static void gaudi_init_hbm_dma_qman(struct hl_device *hdev, int dma_id,
int qman_id, u64 qman_base_addr)
{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
u32 mtr_base_en_lo, mtr_base_en_hi, mtr_base_ws_lo, mtr_base_ws_hi;
u32 so_base_en_lo, so_base_en_hi, so_base_ws_lo, so_base_ws_hi;
+ u32 dma_qm_err_cfg, irq_handler_offset;
u32 q_off, dma_qm_offset;
- u32 dma_qm_err_cfg;
dma_qm_offset = dma_id * DMA_QMAN_OFFSET;
@@ -2697,6 +2768,10 @@ static void gaudi_init_hbm_dma_qman(struct hl_device *hdev, int dma_id,
WREG32(mmDMA0_QM_CP_LDMA_DST_BASE_LO_OFFSET_0 + q_off,
QMAN_CPDMA_DST_OFFSET);
} else {
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_dma_qm_irq_ctrl);
+
WREG32(mmDMA0_QM_CP_LDMA_TSIZE_OFFSET_0 + q_off,
QMAN_LDMA_SIZE_OFFSET);
WREG32(mmDMA0_QM_CP_LDMA_SRC_BASE_LO_OFFSET_0 + q_off,
@@ -2706,18 +2781,17 @@ static void gaudi_init_hbm_dma_qman(struct hl_device *hdev, int dma_id,
/* Configure RAZWI IRQ */
dma_qm_err_cfg = HBM_DMA_QMAN_GLBL_ERR_CFG_MSG_EN_MASK;
- if (hdev->stop_on_err) {
+ if (hdev->stop_on_err)
dma_qm_err_cfg |=
HBM_DMA_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK;
- }
+
WREG32(mmDMA0_QM_GLBL_ERR_CFG + dma_qm_offset, dma_qm_err_cfg);
WREG32(mmDMA0_QM_GLBL_ERR_ADDR_LO + dma_qm_offset,
- lower_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ lower_32_bits(CFG_BASE + irq_handler_offset));
WREG32(mmDMA0_QM_GLBL_ERR_ADDR_HI + dma_qm_offset,
- upper_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ upper_32_bits(CFG_BASE + irq_handler_offset));
+
WREG32(mmDMA0_QM_GLBL_ERR_WDATA + dma_qm_offset,
gaudi_irq_map_table[GAUDI_EVENT_DMA0_QM].cpu_id +
dma_id);
@@ -2792,8 +2866,11 @@ static void gaudi_init_hbm_dma_qmans(struct hl_device *hdev)
static void gaudi_init_mme_qman(struct hl_device *hdev, u32 mme_offset,
int qman_id, u64 qman_base_addr)
{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
u32 mtr_base_lo, mtr_base_hi;
u32 so_base_lo, so_base_hi;
+ u32 irq_handler_offset;
u32 q_off, mme_id;
u32 mme_qm_err_cfg;
@@ -2825,6 +2902,10 @@ static void gaudi_init_mme_qman(struct hl_device *hdev, u32 mme_offset,
WREG32(mmMME0_QM_CP_LDMA_DST_BASE_LO_OFFSET_0 + q_off,
QMAN_CPDMA_DST_OFFSET);
} else {
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_mme_qm_irq_ctrl);
+
WREG32(mmMME0_QM_CP_LDMA_TSIZE_OFFSET_0 + q_off,
QMAN_LDMA_SIZE_OFFSET);
WREG32(mmMME0_QM_CP_LDMA_SRC_BASE_LO_OFFSET_0 + q_off,
@@ -2834,20 +2915,20 @@ static void gaudi_init_mme_qman(struct hl_device *hdev, u32 mme_offset,
/* Configure RAZWI IRQ */
mme_id = mme_offset /
- (mmMME1_QM_GLBL_CFG0 - mmMME0_QM_GLBL_CFG0);
+ (mmMME1_QM_GLBL_CFG0 - mmMME0_QM_GLBL_CFG0) / 2;
mme_qm_err_cfg = MME_QMAN_GLBL_ERR_CFG_MSG_EN_MASK;
- if (hdev->stop_on_err) {
+ if (hdev->stop_on_err)
mme_qm_err_cfg |=
MME_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK;
- }
+
WREG32(mmMME0_QM_GLBL_ERR_CFG + mme_offset, mme_qm_err_cfg);
+
WREG32(mmMME0_QM_GLBL_ERR_ADDR_LO + mme_offset,
- lower_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ lower_32_bits(CFG_BASE + irq_handler_offset));
WREG32(mmMME0_QM_GLBL_ERR_ADDR_HI + mme_offset,
- upper_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ upper_32_bits(CFG_BASE + irq_handler_offset));
+
WREG32(mmMME0_QM_GLBL_ERR_WDATA + mme_offset,
gaudi_irq_map_table[GAUDI_EVENT_MME0_QM].cpu_id +
mme_id);
@@ -2912,10 +2993,12 @@ static void gaudi_init_mme_qmans(struct hl_device *hdev)
static void gaudi_init_tpc_qman(struct hl_device *hdev, u32 tpc_offset,
int qman_id, u64 qman_base_addr)
{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
u32 mtr_base_en_lo, mtr_base_en_hi, mtr_base_ws_lo, mtr_base_ws_hi;
u32 so_base_en_lo, so_base_en_hi, so_base_ws_lo, so_base_ws_hi;
+ u32 tpc_qm_err_cfg, irq_handler_offset;
u32 q_off, tpc_id;
- u32 tpc_qm_err_cfg;
mtr_base_en_lo = lower_32_bits(CFG_BASE +
mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0);
@@ -2956,6 +3039,10 @@ static void gaudi_init_tpc_qman(struct hl_device *hdev, u32 tpc_offset,
WREG32(mmTPC0_QM_CP_LDMA_DST_BASE_LO_OFFSET_0 + q_off,
QMAN_CPDMA_DST_OFFSET);
} else {
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_tpc_qm_irq_ctrl);
+
WREG32(mmTPC0_QM_CP_LDMA_TSIZE_OFFSET_0 + q_off,
QMAN_LDMA_SIZE_OFFSET);
WREG32(mmTPC0_QM_CP_LDMA_SRC_BASE_LO_OFFSET_0 + q_off,
@@ -2965,18 +3052,17 @@ static void gaudi_init_tpc_qman(struct hl_device *hdev, u32 tpc_offset,
/* Configure RAZWI IRQ */
tpc_qm_err_cfg = TPC_QMAN_GLBL_ERR_CFG_MSG_EN_MASK;
- if (hdev->stop_on_err) {
+ if (hdev->stop_on_err)
tpc_qm_err_cfg |=
TPC_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK;
- }
WREG32(mmTPC0_QM_GLBL_ERR_CFG + tpc_offset, tpc_qm_err_cfg);
+
WREG32(mmTPC0_QM_GLBL_ERR_ADDR_LO + tpc_offset,
- lower_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ lower_32_bits(CFG_BASE + irq_handler_offset));
WREG32(mmTPC0_QM_GLBL_ERR_ADDR_HI + tpc_offset,
- upper_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ upper_32_bits(CFG_BASE + irq_handler_offset));
+
WREG32(mmTPC0_QM_GLBL_ERR_WDATA + tpc_offset,
gaudi_irq_map_table[GAUDI_EVENT_TPC0_QM].cpu_id +
tpc_id);
@@ -3059,10 +3145,12 @@ static void gaudi_init_tpc_qmans(struct hl_device *hdev)
static void gaudi_init_nic_qman(struct hl_device *hdev, u32 nic_offset,
int qman_id, u64 qman_base_addr, int nic_id)
{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
u32 mtr_base_en_lo, mtr_base_en_hi, mtr_base_ws_lo, mtr_base_ws_hi;
u32 so_base_en_lo, so_base_en_hi, so_base_ws_lo, so_base_ws_hi;
+ u32 nic_qm_err_cfg, irq_handler_offset;
u32 q_off;
- u32 nic_qm_err_cfg;
mtr_base_en_lo = lower_32_bits(CFG_BASE +
mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0);
@@ -3109,20 +3197,23 @@ static void gaudi_init_nic_qman(struct hl_device *hdev, u32 nic_offset,
WREG32(mmNIC0_QM0_CP_MSG_BASE3_ADDR_HI_0 + q_off, so_base_ws_hi);
if (qman_id == 0) {
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_nic_qm_irq_ctrl);
+
/* Configure RAZWI IRQ */
nic_qm_err_cfg = NIC_QMAN_GLBL_ERR_CFG_MSG_EN_MASK;
- if (hdev->stop_on_err) {
+ if (hdev->stop_on_err)
nic_qm_err_cfg |=
NIC_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK;
- }
WREG32(mmNIC0_QM0_GLBL_ERR_CFG + nic_offset, nic_qm_err_cfg);
+
WREG32(mmNIC0_QM0_GLBL_ERR_ADDR_LO + nic_offset,
- lower_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ lower_32_bits(CFG_BASE + irq_handler_offset));
WREG32(mmNIC0_QM0_GLBL_ERR_ADDR_HI + nic_offset,
- upper_32_bits(CFG_BASE +
- mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR));
+ upper_32_bits(CFG_BASE + irq_handler_offset));
+
WREG32(mmNIC0_QM0_GLBL_ERR_WDATA + nic_offset,
gaudi_irq_map_table[GAUDI_EVENT_NIC0_QM0].cpu_id +
nic_id);
@@ -3475,7 +3566,7 @@ static void gaudi_set_clock_gating(struct hl_device *hdev)
if (hdev->in_debug)
return;
- if (!hdev->asic_prop.fw_security_disabled)
+ if (hdev->asic_prop.fw_security_enabled)
return;
for (i = GAUDI_PCI_DMA_1, qman_offset = 0 ; i < GAUDI_HBM_DMA_1 ; i++) {
@@ -3535,7 +3626,7 @@ static void gaudi_disable_clock_gating(struct hl_device *hdev)
u32 qman_offset;
int i;
- if (!hdev->asic_prop.fw_security_disabled)
+ if (hdev->asic_prop.fw_security_enabled)
return;
for (i = 0, qman_offset = 0 ; i < DMA_NUMBER_OF_CHANNELS ; i++) {
@@ -3674,9 +3765,6 @@ static int gaudi_load_firmware_to_device(struct hl_device *hdev)
{
void __iomem *dst;
- /* HBM scrambler must be initialized before pushing F/W to HBM */
- gaudi_init_scrambler_hbm(hdev);
-
dst = hdev->pcie_bar[HBM_BAR_ID] + LINUX_FW_OFFSET;
return hl_fw_load_fw_to_device(hdev, GAUDI_LINUX_FW_FILE, dst, 0, 0);
@@ -3691,42 +3779,71 @@ static int gaudi_load_boot_fit_to_device(struct hl_device *hdev)
return hl_fw_load_fw_to_device(hdev, GAUDI_BOOT_FIT_FILE, dst, 0, 0);
}
-static int gaudi_read_device_fw_version(struct hl_device *hdev,
- enum hl_fw_component fwc)
+static void gaudi_init_dynamic_firmware_loader(struct hl_device *hdev)
{
- const char *name;
- u32 ver_off;
- char *dest;
+ struct dynamic_fw_load_mgr *dynamic_loader;
+ struct cpu_dyn_regs *dyn_regs;
- switch (fwc) {
- case FW_COMP_UBOOT:
- ver_off = RREG32(mmUBOOT_VER_OFFSET);
- dest = hdev->asic_prop.uboot_ver;
- name = "U-Boot";
- break;
- case FW_COMP_PREBOOT:
- ver_off = RREG32(mmPREBOOT_VER_OFFSET);
- dest = hdev->asic_prop.preboot_ver;
- name = "Preboot";
- break;
- default:
- dev_warn(hdev->dev, "Undefined FW component: %d\n", fwc);
- return -EIO;
- }
+ dynamic_loader = &hdev->fw_loader.dynamic_loader;
- ver_off &= ~((u32)SRAM_BASE_ADDR);
+ /*
+ * here we update initial values for few specific dynamic regs (as
+ * before reading the first descriptor from FW those value has to be
+ * hard-coded) in later stages of the protocol those values will be
+ * updated automatically by reading the FW descriptor so data there
+ * will always be up-to-date
+ */
+ dyn_regs = &dynamic_loader->comm_desc.cpu_dyn_regs;
+ dyn_regs->kmd_msg_to_cpu =
+ cpu_to_le32(mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU);
+ dyn_regs->cpu_cmd_status_to_host =
+ cpu_to_le32(mmCPU_CMD_STATUS_TO_HOST);
- if (ver_off < SRAM_SIZE - VERSION_MAX_LEN) {
- memcpy_fromio(dest, hdev->pcie_bar[SRAM_BAR_ID] + ver_off,
- VERSION_MAX_LEN);
- } else {
- dev_err(hdev->dev, "%s version offset (0x%x) is above SRAM\n",
- name, ver_off);
- strcpy(dest, "unavailable");
- return -EIO;
- }
+ dynamic_loader->wait_for_bl_timeout = GAUDI_WAIT_FOR_BL_TIMEOUT_USEC;
+}
- return 0;
+static void gaudi_init_static_firmware_loader(struct hl_device *hdev)
+{
+ struct static_fw_load_mgr *static_loader;
+
+ static_loader = &hdev->fw_loader.static_loader;
+
+ static_loader->preboot_version_max_off = SRAM_SIZE - VERSION_MAX_LEN;
+ static_loader->boot_fit_version_max_off = SRAM_SIZE - VERSION_MAX_LEN;
+ static_loader->kmd_msg_to_cpu_reg = mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU;
+ static_loader->cpu_cmd_status_to_host_reg = mmCPU_CMD_STATUS_TO_HOST;
+ static_loader->cpu_boot_status_reg = mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS;
+ static_loader->cpu_boot_dev_status0_reg = mmCPU_BOOT_DEV_STS0;
+ static_loader->cpu_boot_dev_status1_reg = mmCPU_BOOT_DEV_STS1;
+ static_loader->boot_err0_reg = mmCPU_BOOT_ERR0;
+ static_loader->boot_err1_reg = mmCPU_BOOT_ERR1;
+ static_loader->preboot_version_offset_reg = mmPREBOOT_VER_OFFSET;
+ static_loader->boot_fit_version_offset_reg = mmUBOOT_VER_OFFSET;
+ static_loader->sram_offset_mask = ~(lower_32_bits(SRAM_BASE_ADDR));
+ static_loader->cpu_reset_wait_msec = hdev->pldm ?
+ GAUDI_PLDM_RESET_WAIT_MSEC :
+ GAUDI_CPU_RESET_WAIT_MSEC;
+}
+
+static void gaudi_init_firmware_loader(struct hl_device *hdev)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct fw_load_mgr *fw_loader = &hdev->fw_loader;
+
+ /* fill common fields */
+ fw_loader->linux_loaded = false;
+ fw_loader->boot_fit_img.image_name = GAUDI_BOOT_FIT_FILE;
+ fw_loader->linux_img.image_name = GAUDI_LINUX_FW_FILE;
+ fw_loader->cpu_timeout = GAUDI_CPU_TIMEOUT_USEC;
+ fw_loader->boot_fit_timeout = GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC;
+ fw_loader->skip_bmc = !hdev->bmc_enable;
+ fw_loader->sram_bar_id = SRAM_BAR_ID;
+ fw_loader->dram_bar_id = HBM_BAR_ID;
+
+ if (prop->dynamic_fw_load)
+ gaudi_init_dynamic_firmware_loader(hdev);
+ else
+ gaudi_init_static_firmware_loader(hdev);
}
static int gaudi_init_cpu(struct hl_device *hdev)
@@ -3744,15 +3861,10 @@ static int gaudi_init_cpu(struct hl_device *hdev)
* The device CPU works with 40 bits addresses.
* This register sets the extension to 50 bits.
*/
- if (hdev->asic_prop.fw_security_disabled)
+ if (!hdev->asic_prop.fw_security_enabled)
WREG32(mmCPU_IF_CPU_MSB_ADDR, hdev->cpu_pci_msb_addr);
- rc = hl_fw_init_cpu(hdev, mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS,
- mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU,
- mmCPU_CMD_STATUS_TO_HOST,
- mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0,
- !hdev->bmc_enable, GAUDI_CPU_TIMEOUT_USEC,
- GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC);
+ rc = hl_fw_init_cpu(hdev);
if (rc)
return rc;
@@ -3764,10 +3876,12 @@ static int gaudi_init_cpu(struct hl_device *hdev)
static int gaudi_init_cpu_queues(struct hl_device *hdev, u32 cpu_timeout)
{
- struct gaudi_device *gaudi = hdev->asic_specific;
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct gaudi_device *gaudi = hdev->asic_specific;
+ u32 status, irq_handler_offset;
struct hl_eq *eq;
- u32 status;
struct hl_hw_queue *cpu_pq =
&hdev->kernel_queues[GAUDI_QUEUE_ID_CPU_PQ];
int err;
@@ -3806,7 +3920,12 @@ static int gaudi_init_cpu_queues(struct hl_device *hdev, u32 cpu_timeout)
WREG32(mmCPU_IF_QUEUE_INIT,
PQ_INIT_STATUS_READY_FOR_CP_SINGLE_MSI);
- WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR, GAUDI_EVENT_PI_UPDATE);
+ irq_handler_offset = prop->gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_host_pi_upd_irq);
+
+ WREG32(irq_handler_offset,
+ gaudi_irq_map_table[GAUDI_EVENT_PI_UPDATE].cpu_id);
err = hl_poll_timeout(
hdev,
@@ -3823,8 +3942,10 @@ static int gaudi_init_cpu_queues(struct hl_device *hdev, u32 cpu_timeout)
}
/* update FW application security bits */
- if (prop->fw_security_status_valid)
- prop->fw_app_security_map = RREG32(mmCPU_BOOT_DEV_STS0);
+ if (prop->fw_cpu_boot_dev_sts0_valid)
+ prop->fw_app_cpu_boot_dev_sts0 = RREG32(mmCPU_BOOT_DEV_STS0);
+ if (prop->fw_cpu_boot_dev_sts1_valid)
+ prop->fw_app_cpu_boot_dev_sts1 = RREG32(mmCPU_BOOT_DEV_STS1);
gaudi->hw_cap_initialized |= HW_CAP_CPU_Q;
return 0;
@@ -3835,7 +3956,7 @@ static void gaudi_pre_hw_init(struct hl_device *hdev)
/* Perform read from the device to make sure device is up */
RREG32(mmHW_STATE);
- if (hdev->asic_prop.fw_security_disabled) {
+ if (!hdev->asic_prop.fw_security_enabled) {
/* Set the access through PCI bars (Linux driver only) as
* secured
*/
@@ -3860,13 +3981,27 @@ static void gaudi_pre_hw_init(struct hl_device *hdev)
static int gaudi_hw_init(struct hl_device *hdev)
{
+ struct gaudi_device *gaudi = hdev->asic_specific;
int rc;
gaudi_pre_hw_init(hdev);
- gaudi_init_pci_dma_qmans(hdev);
+ /* If iATU is done by FW, the HBM bar ALWAYS points to DRAM_PHYS_BASE.
+ * So we set it here and if anyone tries to move it later to
+ * a different address, there will be an error
+ */
+ if (hdev->asic_prop.iatu_done_by_fw)
+ gaudi->hbm_bar_cur_addr = DRAM_PHYS_BASE;
- gaudi_init_hbm_dma_qmans(hdev);
+ /*
+ * Before pushing u-boot/linux to device, need to set the hbm bar to
+ * base address of dram
+ */
+ if (gaudi_set_hbm_bar_base(hdev, DRAM_PHYS_BASE) == U64_MAX) {
+ dev_err(hdev->dev,
+ "failed to map HBM bar to DRAM base address\n");
+ return -EIO;
+ }
rc = gaudi_init_cpu(hdev);
if (rc) {
@@ -3895,6 +4030,10 @@ static int gaudi_hw_init(struct hl_device *hdev)
gaudi_init_security(hdev);
+ gaudi_init_pci_dma_qmans(hdev);
+
+ gaudi_init_hbm_dma_qmans(hdev);
+
gaudi_init_mme_qmans(hdev);
gaudi_init_tpc_qmans(hdev);
@@ -3934,8 +4073,11 @@ disable_queues:
static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
+ u32 status, reset_timeout_ms, cpu_timeout_ms, irq_handler_offset;
struct gaudi_device *gaudi = hdev->asic_specific;
- u32 status, reset_timeout_ms, cpu_timeout_ms;
+ bool driver_performs_reset;
if (!hard_reset) {
dev_err(hdev->dev, "GAUDI doesn't support soft-reset\n");
@@ -3950,26 +4092,35 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
cpu_timeout_ms = GAUDI_CPU_RESET_WAIT_MSEC;
}
+ driver_performs_reset = !!(!hdev->asic_prop.fw_security_enabled &&
+ !hdev->asic_prop.hard_reset_done_by_fw);
+
/* Set device to handle FLR by H/W as we will put the device CPU to
* halt mode
*/
- if (hdev->asic_prop.fw_security_disabled &&
- !hdev->asic_prop.hard_reset_done_by_fw)
+ if (driver_performs_reset)
WREG32(mmPCIE_AUX_FLR_CTRL, (PCIE_AUX_FLR_CTRL_HW_CTRL_MASK |
PCIE_AUX_FLR_CTRL_INT_MASK_MASK));
- /* I don't know what is the state of the CPU so make sure it is
- * stopped in any means necessary
+ /* If linux is loaded in the device CPU we need to communicate with it
+ * via the GIC. Otherwise, we need to use COMMS or the MSG_TO_CPU
+ * registers in case of old F/Ws
*/
- if (hdev->asic_prop.hard_reset_done_by_fw)
- WREG32(mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU, KMD_MSG_RST_DEV);
- else
- WREG32(mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU, KMD_MSG_GOTO_WFE);
+ if (hdev->fw_loader.linux_loaded) {
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_host_halt_irq);
- WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR, GAUDI_EVENT_HALT_MACHINE);
+ WREG32(irq_handler_offset,
+ gaudi_irq_map_table[GAUDI_EVENT_HALT_MACHINE].cpu_id);
+ } else {
+ if (hdev->asic_prop.hard_reset_done_by_fw)
+ hl_fw_ask_hard_reset_without_linux(hdev);
+ else
+ hl_fw_ask_halt_machine_without_linux(hdev);
+ }
- if (hdev->asic_prop.fw_security_disabled &&
- !hdev->asic_prop.hard_reset_done_by_fw) {
+ if (driver_performs_reset) {
/* Configure the reset registers. Must be done as early as
* possible in case we fail during H/W initialization
@@ -4003,8 +4154,7 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
WREG32(mmPREBOOT_PCIE_EN, LKD_HARD_RESET_MAGIC);
/* Restart BTL/BLR upon hard-reset */
- if (hdev->asic_prop.fw_security_disabled)
- WREG32(mmPSOC_GLOBAL_CONF_BOOT_SEQ_RE_START, 1);
+ WREG32(mmPSOC_GLOBAL_CONF_BOOT_SEQ_RE_START, 1);
WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST,
1 << PSOC_GLOBAL_CONF_SW_ALL_RST_IND_SHIFT);
@@ -4041,6 +4191,8 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
HW_CAP_CLK_GATE);
memset(gaudi->events_stat, 0, sizeof(gaudi->events_stat));
+
+ hdev->device_cpu_is_halted = false;
}
}
@@ -4078,10 +4230,12 @@ static int gaudi_cb_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
static void gaudi_ring_doorbell(struct hl_device *hdev, u32 hw_queue_id, u32 pi)
{
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
+ u32 db_reg_offset, db_value, dma_qm_offset, q_off, irq_handler_offset;
struct gaudi_device *gaudi = hdev->asic_specific;
- u32 db_reg_offset, db_value, dma_qm_offset, q_off;
- int dma_id;
bool invalid_queue = false;
+ int dma_id;
switch (hw_queue_id) {
case GAUDI_QUEUE_ID_DMA_0_0...GAUDI_QUEUE_ID_DMA_0_3:
@@ -4307,164 +4461,84 @@ static void gaudi_ring_doorbell(struct hl_device *hdev, u32 hw_queue_id, u32 pi)
db_reg_offset = mmTPC7_QM_PQ_PI_3;
break;
- case GAUDI_QUEUE_ID_NIC_0_0:
- db_reg_offset = mmNIC0_QM0_PQ_PI_0;
- break;
-
- case GAUDI_QUEUE_ID_NIC_0_1:
- db_reg_offset = mmNIC0_QM0_PQ_PI_1;
- break;
-
- case GAUDI_QUEUE_ID_NIC_0_2:
- db_reg_offset = mmNIC0_QM0_PQ_PI_2;
- break;
-
- case GAUDI_QUEUE_ID_NIC_0_3:
- db_reg_offset = mmNIC0_QM0_PQ_PI_3;
- break;
-
- case GAUDI_QUEUE_ID_NIC_1_0:
- db_reg_offset = mmNIC0_QM1_PQ_PI_0;
- break;
-
- case GAUDI_QUEUE_ID_NIC_1_1:
- db_reg_offset = mmNIC0_QM1_PQ_PI_1;
- break;
-
- case GAUDI_QUEUE_ID_NIC_1_2:
- db_reg_offset = mmNIC0_QM1_PQ_PI_2;
- break;
-
- case GAUDI_QUEUE_ID_NIC_1_3:
- db_reg_offset = mmNIC0_QM1_PQ_PI_3;
- break;
-
- case GAUDI_QUEUE_ID_NIC_2_0:
- db_reg_offset = mmNIC1_QM0_PQ_PI_0;
- break;
-
- case GAUDI_QUEUE_ID_NIC_2_1:
- db_reg_offset = mmNIC1_QM0_PQ_PI_1;
- break;
-
- case GAUDI_QUEUE_ID_NIC_2_2:
- db_reg_offset = mmNIC1_QM0_PQ_PI_2;
- break;
-
- case GAUDI_QUEUE_ID_NIC_2_3:
- db_reg_offset = mmNIC1_QM0_PQ_PI_3;
- break;
-
- case GAUDI_QUEUE_ID_NIC_3_0:
- db_reg_offset = mmNIC1_QM1_PQ_PI_0;
- break;
-
- case GAUDI_QUEUE_ID_NIC_3_1:
- db_reg_offset = mmNIC1_QM1_PQ_PI_1;
- break;
-
- case GAUDI_QUEUE_ID_NIC_3_2:
- db_reg_offset = mmNIC1_QM1_PQ_PI_2;
- break;
-
- case GAUDI_QUEUE_ID_NIC_3_3:
- db_reg_offset = mmNIC1_QM1_PQ_PI_3;
- break;
-
- case GAUDI_QUEUE_ID_NIC_4_0:
- db_reg_offset = mmNIC2_QM0_PQ_PI_0;
- break;
-
- case GAUDI_QUEUE_ID_NIC_4_1:
- db_reg_offset = mmNIC2_QM0_PQ_PI_1;
- break;
-
- case GAUDI_QUEUE_ID_NIC_4_2:
- db_reg_offset = mmNIC2_QM0_PQ_PI_2;
- break;
-
- case GAUDI_QUEUE_ID_NIC_4_3:
- db_reg_offset = mmNIC2_QM0_PQ_PI_3;
- break;
-
- case GAUDI_QUEUE_ID_NIC_5_0:
- db_reg_offset = mmNIC2_QM1_PQ_PI_0;
- break;
+ case GAUDI_QUEUE_ID_NIC_0_0...GAUDI_QUEUE_ID_NIC_0_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC0))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_5_1:
- db_reg_offset = mmNIC2_QM1_PQ_PI_1;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC0_QM0_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_5_2:
- db_reg_offset = mmNIC2_QM1_PQ_PI_2;
- break;
+ case GAUDI_QUEUE_ID_NIC_1_0...GAUDI_QUEUE_ID_NIC_1_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC1))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_5_3:
- db_reg_offset = mmNIC2_QM1_PQ_PI_3;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC0_QM1_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_6_0:
- db_reg_offset = mmNIC3_QM0_PQ_PI_0;
- break;
+ case GAUDI_QUEUE_ID_NIC_2_0...GAUDI_QUEUE_ID_NIC_2_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC2))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_6_1:
- db_reg_offset = mmNIC3_QM0_PQ_PI_1;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC1_QM0_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_6_2:
- db_reg_offset = mmNIC3_QM0_PQ_PI_2;
- break;
+ case GAUDI_QUEUE_ID_NIC_3_0...GAUDI_QUEUE_ID_NIC_3_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC3))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_6_3:
- db_reg_offset = mmNIC3_QM0_PQ_PI_3;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC1_QM1_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_7_0:
- db_reg_offset = mmNIC3_QM1_PQ_PI_0;
- break;
+ case GAUDI_QUEUE_ID_NIC_4_0...GAUDI_QUEUE_ID_NIC_4_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC4))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_7_1:
- db_reg_offset = mmNIC3_QM1_PQ_PI_1;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC2_QM0_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_7_2:
- db_reg_offset = mmNIC3_QM1_PQ_PI_2;
- break;
+ case GAUDI_QUEUE_ID_NIC_5_0...GAUDI_QUEUE_ID_NIC_5_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC5))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_7_3:
- db_reg_offset = mmNIC3_QM1_PQ_PI_3;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC2_QM1_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_8_0:
- db_reg_offset = mmNIC4_QM0_PQ_PI_0;
- break;
+ case GAUDI_QUEUE_ID_NIC_6_0...GAUDI_QUEUE_ID_NIC_6_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC6))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_8_1:
- db_reg_offset = mmNIC4_QM0_PQ_PI_1;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC3_QM0_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_8_2:
- db_reg_offset = mmNIC4_QM0_PQ_PI_2;
- break;
+ case GAUDI_QUEUE_ID_NIC_7_0...GAUDI_QUEUE_ID_NIC_7_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC7))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_8_3:
- db_reg_offset = mmNIC4_QM0_PQ_PI_3;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC3_QM1_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_9_0:
- db_reg_offset = mmNIC4_QM1_PQ_PI_0;
- break;
+ case GAUDI_QUEUE_ID_NIC_8_0...GAUDI_QUEUE_ID_NIC_8_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC8))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_9_1:
- db_reg_offset = mmNIC4_QM1_PQ_PI_1;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC4_QM0_PQ_PI_0 + q_off;
break;
- case GAUDI_QUEUE_ID_NIC_9_2:
- db_reg_offset = mmNIC4_QM1_PQ_PI_2;
- break;
+ case GAUDI_QUEUE_ID_NIC_9_0...GAUDI_QUEUE_ID_NIC_9_3:
+ if (!(gaudi->hw_cap_initialized & HW_CAP_NIC9))
+ invalid_queue = true;
- case GAUDI_QUEUE_ID_NIC_9_3:
- db_reg_offset = mmNIC4_QM1_PQ_PI_3;
+ q_off = ((hw_queue_id - 1) & 0x3) * 4;
+ db_reg_offset = mmNIC4_QM1_PQ_PI_0 + q_off;
break;
default:
@@ -4486,8 +4560,13 @@ static void gaudi_ring_doorbell(struct hl_device *hdev, u32 hw_queue_id, u32 pi)
if (hw_queue_id == GAUDI_QUEUE_ID_CPU_PQ) {
/* make sure device CPU will read latest data from host */
mb();
- WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR,
- GAUDI_EVENT_PI_UPDATE);
+
+ irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_host_pi_upd_irq);
+
+ WREG32(irq_handler_offset,
+ gaudi_irq_map_table[GAUDI_EVENT_PI_UPDATE].cpu_id);
}
}
@@ -4934,6 +5013,7 @@ already_pinned:
return 0;
unpin_memory:
+ list_del(&userptr->job_node);
hl_unpin_host_memory(hdev, userptr);
free_userptr:
kfree(userptr);
@@ -6513,7 +6593,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
gaudi_mmu_prepare_reg(hdev, mmMME2_ACC_WBC, asid);
gaudi_mmu_prepare_reg(hdev, mmMME3_ACC_WBC, asid);
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC0) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC0) {
gaudi_mmu_prepare_reg(hdev, mmNIC0_QM0_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC0_QM0_GLBL_NON_SECURE_PROPS_1,
@@ -6526,7 +6606,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC1) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC1) {
gaudi_mmu_prepare_reg(hdev, mmNIC0_QM1_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC0_QM1_GLBL_NON_SECURE_PROPS_1,
@@ -6539,7 +6619,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC2) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC2) {
gaudi_mmu_prepare_reg(hdev, mmNIC1_QM0_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC1_QM0_GLBL_NON_SECURE_PROPS_1,
@@ -6552,7 +6632,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC3) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC3) {
gaudi_mmu_prepare_reg(hdev, mmNIC1_QM1_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC1_QM1_GLBL_NON_SECURE_PROPS_1,
@@ -6565,7 +6645,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC4) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC4) {
gaudi_mmu_prepare_reg(hdev, mmNIC2_QM0_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC2_QM0_GLBL_NON_SECURE_PROPS_1,
@@ -6578,7 +6658,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC5) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC5) {
gaudi_mmu_prepare_reg(hdev, mmNIC2_QM1_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC2_QM1_GLBL_NON_SECURE_PROPS_1,
@@ -6591,7 +6671,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC6) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC6) {
gaudi_mmu_prepare_reg(hdev, mmNIC3_QM0_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC3_QM0_GLBL_NON_SECURE_PROPS_1,
@@ -6604,7 +6684,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC7) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC7) {
gaudi_mmu_prepare_reg(hdev, mmNIC3_QM1_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC3_QM1_GLBL_NON_SECURE_PROPS_1,
@@ -6617,7 +6697,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC8) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC8) {
gaudi_mmu_prepare_reg(hdev, mmNIC4_QM0_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC4_QM0_GLBL_NON_SECURE_PROPS_1,
@@ -6630,7 +6710,7 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
asid);
}
- if (hdev->nic_ports_mask & GAUDI_NIC_MASK_NIC9) {
+ if (gaudi->hw_cap_initialized & HW_CAP_NIC9) {
gaudi_mmu_prepare_reg(hdev, mmNIC4_QM1_GLBL_NON_SECURE_PROPS_0,
asid);
gaudi_mmu_prepare_reg(hdev, mmNIC4_QM1_GLBL_NON_SECURE_PROPS_1,
@@ -7044,14 +7124,158 @@ enable_clk_gate:
return rc;
}
+/*
+ * gaudi_queue_idx_dec - decrement queue index (pi/ci) and handle wrap
+ *
+ * @idx: the current pi/ci value
+ * @q_len: the queue length (power of 2)
+ *
+ * @return the cyclically decremented index
+ */
+static inline u32 gaudi_queue_idx_dec(u32 idx, u32 q_len)
+{
+ u32 mask = q_len - 1;
+
+ /*
+ * modular decrement is equivalent to adding (queue_size -1)
+ * later we take LSBs to make sure the value is in the
+ * range [0, queue_len - 1]
+ */
+ return (idx + q_len - 1) & mask;
+}
+
+/**
+ * gaudi_print_sw_config_stream_data - print SW config stream data
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @stream: the QMAN's stream
+ * @qman_base: base address of QMAN registers block
+ */
+static void gaudi_print_sw_config_stream_data(struct hl_device *hdev, u32 stream,
+ u64 qman_base)
+{
+ u64 cq_ptr_lo, cq_ptr_hi, cq_tsize, cq_ptr;
+ u32 cq_ptr_lo_off, size;
+
+ cq_ptr_lo_off = mmTPC0_QM_CQ_PTR_LO_1 - mmTPC0_QM_CQ_PTR_LO_0;
+
+ cq_ptr_lo = qman_base + (mmTPC0_QM_CQ_PTR_LO_0 - mmTPC0_QM_BASE) +
+ stream * cq_ptr_lo_off;
+ cq_ptr_hi = cq_ptr_lo +
+ (mmTPC0_QM_CQ_PTR_HI_0 - mmTPC0_QM_CQ_PTR_LO_0);
+ cq_tsize = cq_ptr_lo +
+ (mmTPC0_QM_CQ_TSIZE_0 - mmTPC0_QM_CQ_PTR_LO_0);
+
+ cq_ptr = (((u64) RREG32(cq_ptr_hi)) << 32) | RREG32(cq_ptr_lo);
+ size = RREG32(cq_tsize);
+ dev_info(hdev->dev, "stop on err: stream: %u, addr: %#llx, size: %x\n",
+ stream, cq_ptr, size);
+}
+
+/**
+ * gaudi_print_last_pqes_on_err - print last PQEs on error
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @qid_base: first QID of the QMAN (out of 4 streams)
+ * @stream: the QMAN's stream
+ * @qman_base: base address of QMAN registers block
+ * @pr_sw_conf: if true print the SW config stream data (CQ PTR and SIZE)
+ */
+static void gaudi_print_last_pqes_on_err(struct hl_device *hdev, u32 qid_base,
+ u32 stream, u64 qman_base,
+ bool pr_sw_conf)
+{
+ u32 ci, qm_ci_stream_off, queue_len;
+ struct hl_hw_queue *q;
+ u64 pq_ci;
+ int i;
+
+ q = &hdev->kernel_queues[qid_base + stream];
+
+ qm_ci_stream_off = mmTPC0_QM_PQ_CI_1 - mmTPC0_QM_PQ_CI_0;
+ pq_ci = qman_base + (mmTPC0_QM_PQ_CI_0 - mmTPC0_QM_BASE) +
+ stream * qm_ci_stream_off;
+
+ queue_len = (q->queue_type == QUEUE_TYPE_INT) ?
+ q->int_queue_len : HL_QUEUE_LENGTH;
+
+ hdev->asic_funcs->hw_queues_lock(hdev);
+
+ if (pr_sw_conf)
+ gaudi_print_sw_config_stream_data(hdev, stream, qman_base);
+
+ ci = RREG32(pq_ci);
+
+ /* we should start printing form ci -1 */
+ ci = gaudi_queue_idx_dec(ci, queue_len);
+
+ for (i = 0; i < PQ_FETCHER_CACHE_SIZE; i++) {
+ struct hl_bd *bd;
+ u64 addr;
+ u32 len;
+
+ bd = q->kernel_address;
+ bd += ci;
+
+ len = le32_to_cpu(bd->len);
+ /* len 0 means uninitialized entry- break */
+ if (!len)
+ break;
+
+ addr = le64_to_cpu(bd->ptr);
+
+ dev_info(hdev->dev, "stop on err PQE(stream %u): ci: %u, addr: %#llx, size: %x\n",
+ stream, ci, addr, len);
+
+ /* get previous ci, wrap if needed */
+ ci = gaudi_queue_idx_dec(ci, queue_len);
+ }
+
+ hdev->asic_funcs->hw_queues_unlock(hdev);
+}
+
+/**
+ * print_qman_data_on_err - extract QMAN data on error
+ *
+ * @hdev: pointer to the habanalabs device structure
+ * @qid_base: first QID of the QMAN (out of 4 streams)
+ * @stream: the QMAN's stream
+ * @qman_base: base address of QMAN registers block
+ *
+ * This function attempt to exatract as much data as possible on QMAN error.
+ * On upper CP print the SW config stream data and last 8 PQEs.
+ * On lower CP print SW config data and last PQEs of ALL 4 upper CPs
+ */
+static void print_qman_data_on_err(struct hl_device *hdev, u32 qid_base,
+ u32 stream, u64 qman_base)
+{
+ u32 i;
+
+ if (stream != QMAN_STREAMS) {
+ gaudi_print_last_pqes_on_err(hdev, qid_base, stream, qman_base,
+ true);
+ return;
+ }
+
+ gaudi_print_sw_config_stream_data(hdev, stream, qman_base);
+
+ for (i = 0; i < QMAN_STREAMS; i++)
+ gaudi_print_last_pqes_on_err(hdev, qid_base, i, qman_base,
+ false);
+}
+
static void gaudi_handle_qman_err_generic(struct hl_device *hdev,
const char *qm_name,
- u64 glbl_sts_addr,
- u64 arb_err_addr)
+ u64 qman_base,
+ u32 qid_base)
{
u32 i, j, glbl_sts_val, arb_err_val, glbl_sts_clr_val;
+ u64 glbl_sts_addr, arb_err_addr;
char reg_desc[32];
+ glbl_sts_addr = qman_base + (mmTPC0_QM_GLBL_STS1_0 - mmTPC0_QM_BASE);
+ arb_err_addr = qman_base + (mmTPC0_QM_ARB_ERR_CAUSE - mmTPC0_QM_BASE);
+
/* Iterate through all stream GLBL_STS1 registers + Lower CP */
for (i = 0 ; i < QMAN_STREAMS + 1 ; i++) {
glbl_sts_clr_val = 0;
@@ -7078,6 +7302,8 @@ static void gaudi_handle_qman_err_generic(struct hl_device *hdev,
/* Write 1 clear errors */
if (!hdev->stop_on_err)
WREG32(glbl_sts_addr + 4 * i, glbl_sts_clr_val);
+ else
+ print_qman_data_on_err(hdev, qid_base, i, qman_base);
}
arb_err_val = RREG32(arb_err_addr);
@@ -7222,90 +7448,88 @@ static void gaudi_handle_ecc_event(struct hl_device *hdev, u16 event_type,
static void gaudi_handle_qman_err(struct hl_device *hdev, u16 event_type)
{
- u64 glbl_sts_addr, arb_err_addr;
- u8 index;
+ u64 qman_base;
char desc[32];
+ u32 qid_base;
+ u8 index;
switch (event_type) {
case GAUDI_EVENT_TPC0_QM ... GAUDI_EVENT_TPC7_QM:
index = event_type - GAUDI_EVENT_TPC0_QM;
- glbl_sts_addr =
- mmTPC0_QM_GLBL_STS1_0 + index * TPC_QMAN_OFFSET;
- arb_err_addr =
- mmTPC0_QM_ARB_ERR_CAUSE + index * TPC_QMAN_OFFSET;
+ qid_base = GAUDI_QUEUE_ID_TPC_0_0 + index * QMAN_STREAMS;
+ qman_base = mmTPC0_QM_BASE + index * TPC_QMAN_OFFSET;
snprintf(desc, ARRAY_SIZE(desc), "%s%d", "TPC_QM", index);
break;
case GAUDI_EVENT_MME0_QM ... GAUDI_EVENT_MME2_QM:
index = event_type - GAUDI_EVENT_MME0_QM;
- glbl_sts_addr =
- mmMME0_QM_GLBL_STS1_0 + index * MME_QMAN_OFFSET;
- arb_err_addr =
- mmMME0_QM_ARB_ERR_CAUSE + index * MME_QMAN_OFFSET;
+ qid_base = GAUDI_QUEUE_ID_MME_0_0 + index * QMAN_STREAMS;
+ qman_base = mmMME0_QM_BASE + index * MME_QMAN_OFFSET;
snprintf(desc, ARRAY_SIZE(desc), "%s%d", "MME_QM", index);
break;
case GAUDI_EVENT_DMA0_QM ... GAUDI_EVENT_DMA7_QM:
index = event_type - GAUDI_EVENT_DMA0_QM;
- glbl_sts_addr =
- mmDMA0_QM_GLBL_STS1_0 + index * DMA_QMAN_OFFSET;
- arb_err_addr =
- mmDMA0_QM_ARB_ERR_CAUSE + index * DMA_QMAN_OFFSET;
+ qid_base = GAUDI_QUEUE_ID_DMA_0_0 + index * QMAN_STREAMS;
+ /* skip GAUDI_QUEUE_ID_CPU_PQ if necessary */
+ if (index > 1)
+ qid_base++;
+ qman_base = mmDMA0_QM_BASE + index * DMA_QMAN_OFFSET;
snprintf(desc, ARRAY_SIZE(desc), "%s%d", "DMA_QM", index);
break;
case GAUDI_EVENT_NIC0_QM0:
- glbl_sts_addr = mmNIC0_QM0_GLBL_STS1_0;
- arb_err_addr = mmNIC0_QM0_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_0_0;
+ qman_base = mmNIC0_QM0_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC0_QM0");
break;
case GAUDI_EVENT_NIC0_QM1:
- glbl_sts_addr = mmNIC0_QM1_GLBL_STS1_0;
- arb_err_addr = mmNIC0_QM1_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_1_0;
+ qman_base = mmNIC0_QM1_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC0_QM1");
break;
case GAUDI_EVENT_NIC1_QM0:
- glbl_sts_addr = mmNIC1_QM0_GLBL_STS1_0;
- arb_err_addr = mmNIC1_QM0_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_2_0;
+ qman_base = mmNIC1_QM0_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC1_QM0");
break;
case GAUDI_EVENT_NIC1_QM1:
- glbl_sts_addr = mmNIC1_QM1_GLBL_STS1_0;
- arb_err_addr = mmNIC1_QM1_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_3_0;
+ qman_base = mmNIC1_QM1_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC1_QM1");
break;
case GAUDI_EVENT_NIC2_QM0:
- glbl_sts_addr = mmNIC2_QM0_GLBL_STS1_0;
- arb_err_addr = mmNIC2_QM0_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_4_0;
+ qman_base = mmNIC2_QM0_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC2_QM0");
break;
case GAUDI_EVENT_NIC2_QM1:
- glbl_sts_addr = mmNIC2_QM1_GLBL_STS1_0;
- arb_err_addr = mmNIC2_QM1_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_5_0;
+ qman_base = mmNIC2_QM1_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC2_QM1");
break;
case GAUDI_EVENT_NIC3_QM0:
- glbl_sts_addr = mmNIC3_QM0_GLBL_STS1_0;
- arb_err_addr = mmNIC3_QM0_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_6_0;
+ qman_base = mmNIC3_QM0_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC3_QM0");
break;
case GAUDI_EVENT_NIC3_QM1:
- glbl_sts_addr = mmNIC3_QM1_GLBL_STS1_0;
- arb_err_addr = mmNIC3_QM1_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_7_0;
+ qman_base = mmNIC3_QM1_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC3_QM1");
break;
case GAUDI_EVENT_NIC4_QM0:
- glbl_sts_addr = mmNIC4_QM0_GLBL_STS1_0;
- arb_err_addr = mmNIC4_QM0_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_8_0;
+ qman_base = mmNIC4_QM0_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC4_QM0");
break;
case GAUDI_EVENT_NIC4_QM1:
- glbl_sts_addr = mmNIC4_QM1_GLBL_STS1_0;
- arb_err_addr = mmNIC4_QM1_ARB_ERR_CAUSE;
+ qid_base = GAUDI_QUEUE_ID_NIC_9_0;
+ qman_base = mmNIC4_QM1_BASE;
snprintf(desc, ARRAY_SIZE(desc), "NIC4_QM1");
break;
default:
return;
}
- gaudi_handle_qman_err_generic(hdev, desc, glbl_sts_addr, arb_err_addr);
+ gaudi_handle_qman_err_generic(hdev, desc, qman_base, qid_base);
}
static void gaudi_print_irq_info(struct hl_device *hdev, u16 event_type,
@@ -7332,6 +7556,16 @@ static void gaudi_print_out_of_sync_info(struct hl_device *hdev,
sync_err->pi, sync_err->ci, q->pi, atomic_read(&q->ci));
}
+static void gaudi_print_fw_alive_info(struct hl_device *hdev,
+ struct hl_eq_fw_alive *fw_alive)
+{
+ dev_err(hdev->dev,
+ "FW alive report: severity=%s, process_id=%u, thread_id=%u, uptime=%llu seconds\n",
+ (fw_alive->severity == FW_ALIVE_SEVERITY_MINOR) ?
+ "Minor" : "Critical", fw_alive->process_id,
+ fw_alive->thread_id, fw_alive->uptime_seconds);
+}
+
static int gaudi_soft_reset_late_init(struct hl_device *hdev)
{
struct gaudi_device *gaudi = hdev->asic_specific;
@@ -7346,11 +7580,10 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
struct hl_eq_hbm_ecc_data *hbm_ecc_data)
{
u32 base, val, val2, wr_par, rd_par, ca_par, derr, serr, type, ch;
- int err = 0;
+ int rc = 0;
- if (hdev->asic_prop.fw_security_status_valid &&
- (hdev->asic_prop.fw_app_security_map &
- CPU_BOOT_DEV_STS0_HBM_ECC_EN)) {
+ if (hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
+ CPU_BOOT_DEV_STS0_HBM_ECC_EN) {
if (!hbm_ecc_data) {
dev_err(hdev->dev, "No FW ECC data");
return 0;
@@ -7379,13 +7612,10 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
device, ch, hbm_ecc_data->first_addr, type,
hbm_ecc_data->sec_cont_cnt, hbm_ecc_data->sec_cnt,
hbm_ecc_data->dec_cnt);
-
- err = 1;
-
return 0;
}
- if (!hdev->asic_prop.fw_security_disabled) {
+ if (hdev->asic_prop.fw_security_enabled) {
dev_info(hdev->dev, "Cannot access MC regs for ECC data while security is enabled\n");
return 0;
}
@@ -7395,7 +7625,7 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32_MASK(base + ch * 0x1000 + 0x06C, 0x0000FFFF);
val = (val & 0xFF) | ((val >> 8) & 0xFF);
if (val) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM%d pc%d interrupts info: WR_PAR=%d, RD_PAR=%d, CA_PAR=%d, SERR=%d, DERR=%d\n",
device, ch * 2, val & 0x1, (val >> 1) & 0x1,
@@ -7415,7 +7645,7 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32_MASK(base + ch * 0x1000 + 0x07C, 0x0000FFFF);
val = (val & 0xFF) | ((val >> 8) & 0xFF);
if (val) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM%d pc%d interrupts info: WR_PAR=%d, RD_PAR=%d, CA_PAR=%d, SERR=%d, DERR=%d\n",
device, ch * 2 + 1, val & 0x1, (val >> 1) & 0x1,
@@ -7444,7 +7674,7 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32(base + 0x8F30);
val2 = RREG32(base + 0x8F34);
if (val | val2) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM %d MC SRAM SERR info: Reg 0x8F30=0x%x, Reg 0x8F34=0x%x\n",
device, val, val2);
@@ -7452,13 +7682,13 @@ static int gaudi_hbm_read_interrupts(struct hl_device *hdev, int device,
val = RREG32(base + 0x8F40);
val2 = RREG32(base + 0x8F44);
if (val | val2) {
- err = 1;
+ rc = -EIO;
dev_err(hdev->dev,
"HBM %d MC SRAM DERR info: Reg 0x8F40=0x%x, Reg 0x8F44=0x%x\n",
device, val, val2);
}
- return err;
+ return rc;
}
static int gaudi_hbm_event_to_dev(u16 hbm_event_type)
@@ -7604,6 +7834,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
case GAUDI_EVENT_DMA_IF0_DERR ... GAUDI_EVENT_DMA_IF3_DERR:
case GAUDI_EVENT_HBM_0_DERR ... GAUDI_EVENT_HBM_3_DERR:
case GAUDI_EVENT_MMU_DERR:
+ case GAUDI_EVENT_NIC0_CS_DBG_DERR ... GAUDI_EVENT_NIC4_CS_DBG_DERR:
gaudi_print_irq_info(hdev, event_type, true);
gaudi_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data);
goto reset_device;
@@ -7786,6 +8017,11 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
gaudi_print_out_of_sync_info(hdev, &eq_entry->pkt_sync_err);
goto reset_device;
+ case GAUDI_EVENT_FW_ALIVE_S:
+ gaudi_print_irq_info(hdev, event_type, false);
+ gaudi_print_fw_alive_info(hdev, &eq_entry->fw_alive);
+ goto reset_device;
+
default:
dev_err(hdev->dev, "Received invalid H/W interrupt %d\n",
event_type);
@@ -7856,52 +8092,13 @@ static int gaudi_mmu_invalidate_cache(struct hl_device *hdev, bool is_hard,
}
static int gaudi_mmu_invalidate_cache_range(struct hl_device *hdev,
- bool is_hard, u32 asid, u64 va, u64 size)
+ bool is_hard, u32 flags,
+ u32 asid, u64 va, u64 size)
{
- struct gaudi_device *gaudi = hdev->asic_specific;
- u32 status, timeout_usec;
- u32 inv_data;
- u32 pi;
- int rc;
-
- if (!(gaudi->hw_cap_initialized & HW_CAP_MMU) ||
- hdev->hard_reset_pending)
- return 0;
-
- if (hdev->pldm)
- timeout_usec = GAUDI_PLDM_MMU_TIMEOUT_USEC;
- else
- timeout_usec = MMU_CONFIG_TIMEOUT_USEC;
-
- /*
- * TODO: currently invalidate entire L0 & L1 as in regular hard
- * invalidation. Need to apply invalidation of specific cache
- * lines with mask of ASID & VA & size.
- * Note that L1 with be flushed entirely in any case.
+ /* Treat as invalidate all because there is no range invalidation
+ * in Gaudi
*/
-
- /* L0 & L1 invalidation */
- inv_data = RREG32(mmSTLB_CACHE_INV);
- /* PI is 8 bit */
- pi = ((inv_data & STLB_CACHE_INV_PRODUCER_INDEX_MASK) + 1) & 0xFF;
- WREG32(mmSTLB_CACHE_INV,
- (inv_data & STLB_CACHE_INV_INDEX_MASK_MASK) | pi);
-
- rc = hl_poll_timeout(
- hdev,
- mmSTLB_INV_CONSUMER_INDEX,
- status,
- status == pi,
- 1000,
- timeout_usec);
-
- if (rc) {
- dev_err_ratelimited(hdev->dev,
- "MMU cache invalidation timeout\n");
- hl_device_reset(hdev, HL_RESET_HARD);
- }
-
- return rc;
+ return hdev->asic_funcs->mmu_invalidate_cache(hdev, is_hard, flags);
}
static int gaudi_mmu_update_asid_hop0_addr(struct hl_device *hdev,
@@ -7956,7 +8153,9 @@ static int gaudi_cpucp_info_get(struct hl_device *hdev)
if (!(gaudi->hw_cap_initialized & HW_CAP_CPU_Q))
return 0;
- rc = hl_fw_cpucp_handshake(hdev, mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0);
+ rc = hl_fw_cpucp_handshake(hdev, mmCPU_BOOT_DEV_STS0,
+ mmCPU_BOOT_DEV_STS1, mmCPU_BOOT_ERR0,
+ mmCPU_BOOT_ERR1);
if (rc)
return rc;
@@ -8077,7 +8276,7 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
for (i = 0 ; i < (NIC_NUMBER_OF_ENGINES / 2) ; i++) {
offset = i * NIC_MACRO_QMAN_OFFSET;
port = 2 * i;
- if (hdev->nic_ports_mask & BIT(port)) {
+ if (gaudi->hw_cap_initialized & BIT(HW_CAP_NIC_SHIFT + port)) {
qm_glbl_sts0 = RREG32(mmNIC0_QM0_GLBL_STS0 + offset);
qm_cgm_sts = RREG32(mmNIC0_QM0_CGM_STS + offset);
is_eng_idle = IS_QM_IDLE(qm_glbl_sts0, qm_cgm_sts);
@@ -8092,7 +8291,7 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
}
port = 2 * i + 1;
- if (hdev->nic_ports_mask & BIT(port)) {
+ if (gaudi->hw_cap_initialized & BIT(HW_CAP_NIC_SHIFT + port)) {
qm_glbl_sts0 = RREG32(mmNIC0_QM1_GLBL_STS0 + offset);
qm_cgm_sts = RREG32(mmNIC0_QM1_CGM_STS + offset);
is_eng_idle = IS_QM_IDLE(qm_glbl_sts0, qm_cgm_sts);
@@ -8306,8 +8505,10 @@ static int gaudi_internal_cb_pool_init(struct hl_device *hdev,
HL_VA_RANGE_TYPE_HOST, HOST_SPACE_INTERNAL_CB_SZ,
HL_MMU_VA_ALIGNMENT_NOT_NEEDED);
- if (!hdev->internal_cb_va_base)
+ if (!hdev->internal_cb_va_base) {
+ rc = -ENOMEM;
goto destroy_internal_cb_pool;
+ }
mutex_lock(&ctx->mmu_lock);
rc = hl_mmu_map_contiguous(ctx, hdev->internal_cb_va_base,
@@ -8749,7 +8950,14 @@ static int gaudi_block_mmap(struct hl_device *hdev,
static void gaudi_enable_events_from_fw(struct hl_device *hdev)
{
- WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR, GAUDI_EVENT_INTS_REGISTER);
+ struct cpu_dyn_regs *dyn_regs =
+ &hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
+ u32 irq_handler_offset = hdev->asic_prop.gic_interrupts_enable ?
+ mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR :
+ le32_to_cpu(dyn_regs->gic_host_ints_irq);
+
+ WREG32(irq_handler_offset,
+ gaudi_irq_map_table[GAUDI_EVENT_INTS_REGISTER].cpu_id);
}
static int gaudi_map_pll_idx_to_fw_idx(u32 pll_idx)
@@ -8834,7 +9042,6 @@ static const struct hl_asic_funcs gaudi_funcs = {
.ctx_fini = gaudi_ctx_fini,
.get_clk_rate = gaudi_get_clk_rate,
.get_queue_id_for_cq = gaudi_get_queue_id_for_cq,
- .read_device_fw_version = gaudi_read_device_fw_version,
.load_firmware_to_device = gaudi_load_firmware_to_device,
.load_boot_fit_to_device = gaudi_load_boot_fit_to_device,
.get_signal_cb_size = gaudi_get_signal_cb_size,
@@ -8853,7 +9060,9 @@ static const struct hl_asic_funcs gaudi_funcs = {
.get_hw_block_id = gaudi_get_hw_block_id,
.hw_block_mmap = gaudi_block_mmap,
.enable_events_from_fw = gaudi_enable_events_from_fw,
- .map_pll_idx_to_fw_idx = gaudi_map_pll_idx_to_fw_idx
+ .map_pll_idx_to_fw_idx = gaudi_map_pll_idx_to_fw_idx,
+ .init_firmware_loader = gaudi_init_firmware_loader,
+ .init_cpu_scrambler_dram = gaudi_init_scrambler_hbm
};
/**
diff --git a/drivers/misc/habanalabs/gaudi/gaudiP.h b/drivers/misc/habanalabs/gaudi/gaudiP.h
index 5929be81ec23..957bf3720f70 100644
--- a/drivers/misc/habanalabs/gaudi/gaudiP.h
+++ b/drivers/misc/habanalabs/gaudi/gaudiP.h
@@ -82,6 +82,7 @@
QMAN_STREAMS)
#define QMAN_STREAMS 4
+#define PQ_FETCHER_CACHE_SIZE 8
#define DMA_QMAN_OFFSET (mmDMA1_QM_BASE - mmDMA0_QM_BASE)
#define TPC_QMAN_OFFSET (mmTPC1_QM_BASE - mmTPC0_QM_BASE)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
index 6e56fa1c6c69..c2a27ed1c4d1 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
@@ -424,7 +424,7 @@ static int gaudi_config_stm(struct hl_device *hdev,
if (frequency == 0)
frequency = input->frequency;
WREG32(base_reg + 0xE8C, frequency);
- WREG32(base_reg + 0xE90, 0x7FF);
+ WREG32(base_reg + 0xE90, 0x1F00);
/* SW-2176 - SW WA for HW bug */
if ((CFG_BASE + base_reg) >= mmDMA_CH_0_CS_STM_BASE &&
@@ -434,7 +434,7 @@ static int gaudi_config_stm(struct hl_device *hdev,
WREG32(base_reg + 0xE6C, 0x0);
}
- WREG32(base_reg + 0xE80, 0x27 | (input->id << 16));
+ WREG32(base_reg + 0xE80, 0x23 | (input->id << 16));
} else {
WREG32(base_reg + 0xE80, 4);
WREG32(base_reg + 0xD64, 0);
@@ -634,7 +634,7 @@ static int gaudi_config_etr(struct hl_device *hdev,
WREG32(mmPSOC_ETR_BUFWM, 0x3FFC);
WREG32(mmPSOC_ETR_RSZ, input->buffer_size);
WREG32(mmPSOC_ETR_MODE, input->sink_mode);
- if (hdev->asic_prop.fw_security_disabled) {
+ if (!hdev->asic_prop.fw_security_enabled) {
/* make ETR not privileged */
val = FIELD_PREP(
PSOC_ETR_AXICTL_PROTCTRLBIT0_MASK, 0);
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_security.c b/drivers/misc/habanalabs/gaudi/gaudi_security.c
index 9a706c5980ef..0d3240f1f7d7 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_security.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_security.c
@@ -1448,7 +1448,7 @@ static void gaudi_init_dma_protection_bits(struct hl_device *hdev)
u32 pb_addr, mask;
u8 word_offset;
- if (hdev->asic_prop.fw_security_disabled) {
+ if (!hdev->asic_prop.fw_security_enabled) {
gaudi_pb_set_block(hdev, mmDMA_IF_E_S_BASE);
gaudi_pb_set_block(hdev, mmDMA_IF_E_S_DOWN_CH0_BASE);
gaudi_pb_set_block(hdev, mmDMA_IF_E_S_DOWN_CH1_BASE);
@@ -9135,7 +9135,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
u32 pb_addr, mask;
u8 word_offset;
- if (hdev->asic_prop.fw_security_disabled) {
+ if (!hdev->asic_prop.fw_security_enabled) {
gaudi_pb_set_block(hdev, mmTPC0_E2E_CRED_BASE);
gaudi_pb_set_block(hdev, mmTPC1_E2E_CRED_BASE);
gaudi_pb_set_block(hdev, mmTPC2_E2E_CRED_BASE);
@@ -12818,7 +12818,7 @@ static void gaudi_init_protection_bits(struct hl_device *hdev)
* secured
*/
- if (hdev->asic_prop.fw_security_disabled) {
+ if (!hdev->asic_prop.fw_security_enabled) {
gaudi_pb_set_block(hdev, mmIF_E_PLL_BASE);
gaudi_pb_set_block(hdev, mmMESH_W_PLL_BASE);
gaudi_pb_set_block(hdev, mmSRAM_W_PLL_BASE);
@@ -13023,7 +13023,7 @@ void gaudi_init_security(struct hl_device *hdev)
* property configuration of MME SBAB and ACC to be non-privileged and
* non-secured
*/
- if (hdev->asic_prop.fw_security_disabled) {
+ if (!hdev->asic_prop.fw_security_enabled) {
WREG32(mmMME0_SBAB_PROT, 0x2);
WREG32(mmMME0_ACC_PROT, 0x2);
WREG32(mmMME1_SBAB_PROT, 0x2);
@@ -13032,11 +13032,12 @@ void gaudi_init_security(struct hl_device *hdev)
WREG32(mmMME2_ACC_PROT, 0x2);
WREG32(mmMME3_SBAB_PROT, 0x2);
WREG32(mmMME3_ACC_PROT, 0x2);
- }
- /* On RAZWI, 0 will be returned from RR and 0xBABA0BAD from PB */
- if (hdev->asic_prop.fw_security_disabled)
+ /*
+ * On RAZWI, 0 will be returned from RR and 0xBABA0BAD from PB
+ */
WREG32(0xC01B28, 0x1);
+ }
gaudi_init_range_registers_lbw(hdev);
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index e0ad2a269779..755e08cf2ecc 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -87,6 +87,7 @@
#define GOYA_PLDM_QMAN0_TIMEOUT_USEC (HL_DEVICE_TIMEOUT_USEC * 30)
#define GOYA_BOOT_FIT_REQ_TIMEOUT_USEC 1000000 /* 1s */
#define GOYA_MSG_TO_CPU_TIMEOUT_USEC 4000000 /* 4s */
+#define GOYA_WAIT_FOR_BL_TIMEOUT_USEC 15000000 /* 15s */
#define GOYA_QMAN0_FENCE_VAL 0xD169B243
@@ -354,7 +355,7 @@ static int goya_mmu_set_dram_default_page(struct hl_device *hdev);
static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev);
static void goya_mmu_prepare(struct hl_device *hdev, u32 asid);
-int goya_get_fixed_properties(struct hl_device *hdev)
+int goya_set_fixed_properties(struct hl_device *hdev)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
int i;
@@ -460,8 +461,10 @@ int goya_get_fixed_properties(struct hl_device *hdev)
for (i = 0 ; i < HL_MAX_DCORES ; i++)
prop->first_available_cq[i] = USHRT_MAX;
- prop->fw_security_status_valid = false;
+ prop->fw_cpu_boot_dev_sts0_valid = false;
+ prop->fw_cpu_boot_dev_sts1_valid = false;
prop->hard_reset_done_by_fw = false;
+ prop->gic_interrupts_enable = true;
return 0;
}
@@ -531,10 +534,8 @@ static int goya_init_iatu(struct hl_device *hdev)
struct hl_outbound_pci_region outbound_region;
int rc;
- if (hdev->asic_prop.iatu_done_by_fw) {
- hdev->asic_funcs->set_dma_mask_from_fw(hdev);
+ if (hdev->asic_prop.iatu_done_by_fw)
return 0;
- }
/* Inbound Region 0 - Bar 0 - Point to SRAM and CFG */
inbound_region.mode = PCI_BAR_MATCH_MODE;
@@ -586,7 +587,7 @@ static int goya_early_init(struct hl_device *hdev)
u32 fw_boot_status, val;
int rc;
- rc = goya_get_fixed_properties(hdev);
+ rc = goya_set_fixed_properties(hdev);
if (rc) {
dev_err(hdev->dev, "Failed to get fixed properties\n");
return rc;
@@ -618,7 +619,7 @@ static int goya_early_init(struct hl_device *hdev)
prop->dram_pci_bar_size = pci_resource_len(pdev, DDR_BAR_ID);
/* If FW security is enabled at this point it means no access to ELBI */
- if (!hdev->asic_prop.fw_security_disabled) {
+ if (hdev->asic_prop.fw_security_enabled) {
hdev->asic_prop.iatu_done_by_fw = true;
goto pci_init;
}
@@ -642,8 +643,10 @@ pci_init:
* version to determine whether we run with a security-enabled firmware
*/
rc = hl_fw_read_preboot_status(hdev, mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS,
- mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0,
- GOYA_BOOT_FIT_REQ_TIMEOUT_USEC);
+ mmCPU_BOOT_DEV_STS0,
+ mmCPU_BOOT_DEV_STS1, mmCPU_BOOT_ERR0,
+ mmCPU_BOOT_ERR1,
+ GOYA_BOOT_FIT_REQ_TIMEOUT_USEC);
if (rc) {
if (hdev->reset_on_preboot_fail)
hdev->asic_funcs->hw_fini(hdev, true);
@@ -723,7 +726,15 @@ static void goya_fetch_psoc_frequency(struct hl_device *hdev)
u16 pll_freq_arr[HL_PLL_NUM_OUTPUTS], freq;
int rc;
- if (hdev->asic_prop.fw_security_disabled) {
+ if (hdev->asic_prop.fw_security_enabled) {
+ rc = hl_fw_cpucp_pll_info_get(hdev, HL_GOYA_PCI_PLL,
+ pll_freq_arr);
+
+ if (rc)
+ return;
+
+ freq = pll_freq_arr[1];
+ } else {
div_fctr = RREG32(mmPSOC_PCI_PLL_DIV_FACTOR_1);
div_sel = RREG32(mmPSOC_PCI_PLL_DIV_SEL_1);
nr = RREG32(mmPSOC_PCI_PLL_NR);
@@ -750,14 +761,6 @@ static void goya_fetch_psoc_frequency(struct hl_device *hdev)
div_sel);
freq = 0;
}
- } else {
- rc = hl_fw_cpucp_pll_info_get(hdev, HL_GOYA_PCI_PLL,
- pll_freq_arr);
-
- if (rc)
- return;
-
- freq = pll_freq_arr[1];
}
prop->psoc_timestamp_frequency = freq;
@@ -849,6 +852,39 @@ void goya_late_fini(struct hl_device *hdev)
hdev->hl_chip_info->info = NULL;
}
+static void goya_set_pci_memory_regions(struct hl_device *hdev)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct pci_mem_region *region;
+
+ /* CFG */
+ region = &hdev->pci_mem_region[PCI_REGION_CFG];
+ region->region_base = CFG_BASE;
+ region->region_size = CFG_SIZE;
+ region->offset_in_bar = CFG_BASE - SRAM_BASE_ADDR;
+ region->bar_size = CFG_BAR_SIZE;
+ region->bar_id = SRAM_CFG_BAR_ID;
+ region->used = 1;
+
+ /* SRAM */
+ region = &hdev->pci_mem_region[PCI_REGION_SRAM];
+ region->region_base = SRAM_BASE_ADDR;
+ region->region_size = SRAM_SIZE;
+ region->offset_in_bar = 0;
+ region->bar_size = CFG_BAR_SIZE;
+ region->bar_id = SRAM_CFG_BAR_ID;
+ region->used = 1;
+
+ /* DRAM */
+ region = &hdev->pci_mem_region[PCI_REGION_DRAM];
+ region->region_base = DRAM_PHYS_BASE;
+ region->region_size = hdev->asic_prop.dram_size;
+ region->offset_in_bar = 0;
+ region->bar_size = prop->dram_pci_bar_size;
+ region->bar_id = DDR_BAR_ID;
+ region->used = 1;
+}
+
/*
* goya_sw_init - Goya software initialization code
*
@@ -918,6 +954,9 @@ static int goya_sw_init(struct hl_device *hdev)
spin_lock_init(&goya->hw_queues_lock);
hdev->supports_coresight = true;
hdev->supports_soft_reset = true;
+ hdev->allow_external_soft_reset = true;
+
+ goya_set_pci_memory_regions(hdev);
return 0;
@@ -1263,8 +1302,11 @@ int goya_init_cpu_queues(struct hl_device *hdev)
}
/* update FW application security bits */
- if (prop->fw_security_status_valid)
- prop->fw_app_security_map = RREG32(mmCPU_BOOT_DEV_STS0);
+ if (prop->fw_cpu_boot_dev_sts0_valid)
+ prop->fw_app_cpu_boot_dev_sts0 = RREG32(mmCPU_BOOT_DEV_STS0);
+
+ if (prop->fw_cpu_boot_dev_sts1_valid)
+ prop->fw_app_cpu_boot_dev_sts1 = RREG32(mmCPU_BOOT_DEV_STS1);
goya->hw_cap_initialized |= HW_CAP_CPU_Q;
return 0;
@@ -2402,47 +2444,67 @@ static int goya_load_boot_fit_to_device(struct hl_device *hdev)
return hl_fw_load_fw_to_device(hdev, GOYA_BOOT_FIT_FILE, dst, 0, 0);
}
-/*
- * FW component passes an offset from SRAM_BASE_ADDR in SCRATCHPAD_xx.
- * The version string should be located by that offset.
- */
-static int goya_read_device_fw_version(struct hl_device *hdev,
- enum hl_fw_component fwc)
-{
- const char *name;
- u32 ver_off;
- char *dest;
-
- switch (fwc) {
- case FW_COMP_UBOOT:
- ver_off = RREG32(mmUBOOT_VER_OFFSET);
- dest = hdev->asic_prop.uboot_ver;
- name = "U-Boot";
- break;
- case FW_COMP_PREBOOT:
- ver_off = RREG32(mmPREBOOT_VER_OFFSET);
- dest = hdev->asic_prop.preboot_ver;
- name = "Preboot";
- break;
- default:
- dev_warn(hdev->dev, "Undefined FW component: %d\n", fwc);
- return -EIO;
- }
+static void goya_init_dynamic_firmware_loader(struct hl_device *hdev)
+{
+ struct dynamic_fw_load_mgr *dynamic_loader;
+ struct cpu_dyn_regs *dyn_regs;
- ver_off &= ~((u32)SRAM_BASE_ADDR);
+ dynamic_loader = &hdev->fw_loader.dynamic_loader;
- if (ver_off < SRAM_SIZE - VERSION_MAX_LEN) {
- memcpy_fromio(dest, hdev->pcie_bar[SRAM_CFG_BAR_ID] + ver_off,
- VERSION_MAX_LEN);
- } else {
- dev_err(hdev->dev, "%s version offset (0x%x) is above SRAM\n",
- name, ver_off);
- strcpy(dest, "unavailable");
+ /*
+ * here we update initial values for few specific dynamic regs (as
+ * before reading the first descriptor from FW those value has to be
+ * hard-coded) in later stages of the protocol those values will be
+ * updated automatically by reading the FW descriptor so data there
+ * will always be up-to-date
+ */
+ dyn_regs = &dynamic_loader->comm_desc.cpu_dyn_regs;
+ dyn_regs->kmd_msg_to_cpu =
+ cpu_to_le32(mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU);
+ dyn_regs->cpu_cmd_status_to_host =
+ cpu_to_le32(mmCPU_CMD_STATUS_TO_HOST);
- return -EIO;
- }
+ dynamic_loader->wait_for_bl_timeout = GOYA_WAIT_FOR_BL_TIMEOUT_USEC;
+}
- return 0;
+static void goya_init_static_firmware_loader(struct hl_device *hdev)
+{
+ struct static_fw_load_mgr *static_loader;
+
+ static_loader = &hdev->fw_loader.static_loader;
+
+ static_loader->preboot_version_max_off = SRAM_SIZE - VERSION_MAX_LEN;
+ static_loader->boot_fit_version_max_off = SRAM_SIZE - VERSION_MAX_LEN;
+ static_loader->kmd_msg_to_cpu_reg = mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU;
+ static_loader->cpu_cmd_status_to_host_reg = mmCPU_CMD_STATUS_TO_HOST;
+ static_loader->cpu_boot_status_reg = mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS;
+ static_loader->cpu_boot_dev_status0_reg = mmCPU_BOOT_DEV_STS0;
+ static_loader->cpu_boot_dev_status1_reg = mmCPU_BOOT_DEV_STS1;
+ static_loader->boot_err0_reg = mmCPU_BOOT_ERR0;
+ static_loader->boot_err1_reg = mmCPU_BOOT_ERR1;
+ static_loader->preboot_version_offset_reg = mmPREBOOT_VER_OFFSET;
+ static_loader->boot_fit_version_offset_reg = mmUBOOT_VER_OFFSET;
+ static_loader->sram_offset_mask = ~(lower_32_bits(SRAM_BASE_ADDR));
+}
+
+static void goya_init_firmware_loader(struct hl_device *hdev)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct fw_load_mgr *fw_loader = &hdev->fw_loader;
+
+ /* fill common fields */
+ fw_loader->boot_fit_img.image_name = GOYA_BOOT_FIT_FILE;
+ fw_loader->linux_img.image_name = GOYA_LINUX_FW_FILE;
+ fw_loader->cpu_timeout = GOYA_CPU_TIMEOUT_USEC;
+ fw_loader->boot_fit_timeout = GOYA_BOOT_FIT_REQ_TIMEOUT_USEC;
+ fw_loader->skip_bmc = false;
+ fw_loader->sram_bar_id = SRAM_CFG_BAR_ID;
+ fw_loader->dram_bar_id = DDR_BAR_ID;
+
+ if (prop->dynamic_fw_load)
+ goya_init_dynamic_firmware_loader(hdev);
+ else
+ goya_init_static_firmware_loader(hdev);
}
static int goya_init_cpu(struct hl_device *hdev)
@@ -2466,12 +2528,7 @@ static int goya_init_cpu(struct hl_device *hdev)
return -EIO;
}
- rc = hl_fw_init_cpu(hdev, mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS,
- mmPSOC_GLOBAL_CONF_UBOOT_MAGIC,
- mmCPU_CMD_STATUS_TO_HOST,
- mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0,
- false, GOYA_CPU_TIMEOUT_USEC,
- GOYA_BOOT_FIT_REQ_TIMEOUT_USEC);
+ rc = hl_fw_init_cpu(hdev);
if (rc)
return rc;
@@ -2881,7 +2938,7 @@ void *goya_get_int_queue_base(struct hl_device *hdev, u32 queue_id,
*dma_handle = hdev->asic_prop.sram_base_address;
- base = (void *) hdev->pcie_bar[SRAM_CFG_BAR_ID];
+ base = (__force void *) hdev->pcie_bar[SRAM_CFG_BAR_ID];
switch (queue_id) {
case GOYA_QUEUE_ID_MME:
@@ -3270,6 +3327,7 @@ already_pinned:
return 0;
unpin_memory:
+ list_del(&userptr->job_node);
hl_unpin_host_memory(hdev, userptr);
free_userptr:
kfree(userptr);
@@ -5169,54 +5227,13 @@ static int goya_mmu_invalidate_cache(struct hl_device *hdev, bool is_hard,
}
static int goya_mmu_invalidate_cache_range(struct hl_device *hdev,
- bool is_hard, u32 asid, u64 va, u64 size)
+ bool is_hard, u32 flags,
+ u32 asid, u64 va, u64 size)
{
- struct goya_device *goya = hdev->asic_specific;
- u32 status, timeout_usec, inv_data, pi;
- int rc;
-
- if (!(goya->hw_cap_initialized & HW_CAP_MMU) ||
- hdev->hard_reset_pending)
- return 0;
-
- /* no need in L1 only invalidation in Goya */
- if (!is_hard)
- return 0;
-
- if (hdev->pldm)
- timeout_usec = GOYA_PLDM_MMU_TIMEOUT_USEC;
- else
- timeout_usec = MMU_CONFIG_TIMEOUT_USEC;
-
- /*
- * TODO: currently invalidate entire L0 & L1 as in regular hard
- * invalidation. Need to apply invalidation of specific cache lines with
- * mask of ASID & VA & size.
- * Note that L1 with be flushed entirely in any case.
+ /* Treat as invalidate all because there is no range invalidation
+ * in Goya
*/
-
- /* L0 & L1 invalidation */
- inv_data = RREG32(mmSTLB_CACHE_INV);
- /* PI is 8 bit */
- pi = ((inv_data & STLB_CACHE_INV_PRODUCER_INDEX_MASK) + 1) & 0xFF;
- WREG32(mmSTLB_CACHE_INV,
- (inv_data & STLB_CACHE_INV_INDEX_MASK_MASK) | pi);
-
- rc = hl_poll_timeout(
- hdev,
- mmSTLB_INV_CONSUMER_INDEX,
- status,
- status == pi,
- 1000,
- timeout_usec);
-
- if (rc) {
- dev_err_ratelimited(hdev->dev,
- "MMU cache invalidation timeout\n");
- hl_device_reset(hdev, HL_RESET_HARD);
- }
-
- return rc;
+ return hdev->asic_funcs->mmu_invalidate_cache(hdev, is_hard, flags);
}
int goya_send_heartbeat(struct hl_device *hdev)
@@ -5239,7 +5256,9 @@ int goya_cpucp_info_get(struct hl_device *hdev)
if (!(goya->hw_cap_initialized & HW_CAP_CPU_Q))
return 0;
- rc = hl_fw_cpucp_handshake(hdev, mmCPU_BOOT_DEV_STS0, mmCPU_BOOT_ERR0);
+ rc = hl_fw_cpucp_handshake(hdev, mmCPU_BOOT_DEV_STS0,
+ mmCPU_BOOT_DEV_STS1, mmCPU_BOOT_ERR0,
+ mmCPU_BOOT_ERR1);
if (rc)
return rc;
@@ -5385,6 +5404,11 @@ static int goya_get_eeprom_data(struct hl_device *hdev, void *data,
return hl_fw_get_eeprom_data(hdev, data, max_size);
}
+static void goya_cpu_init_scrambler_dram(struct hl_device *hdev)
+{
+
+}
+
static int goya_ctx_init(struct hl_ctx *ctx)
{
if (ctx->asid != HL_KERNEL_ASID_ID)
@@ -5565,7 +5589,6 @@ static const struct hl_asic_funcs goya_funcs = {
.ctx_fini = goya_ctx_fini,
.get_clk_rate = goya_get_clk_rate,
.get_queue_id_for_cq = goya_get_queue_id_for_cq,
- .read_device_fw_version = goya_read_device_fw_version,
.load_firmware_to_device = goya_load_firmware_to_device,
.load_boot_fit_to_device = goya_load_boot_fit_to_device,
.get_signal_cb_size = goya_get_signal_cb_size,
@@ -5584,7 +5607,9 @@ static const struct hl_asic_funcs goya_funcs = {
.get_hw_block_id = goya_get_hw_block_id,
.hw_block_mmap = goya_block_mmap,
.enable_events_from_fw = goya_enable_events_from_fw,
- .map_pll_idx_to_fw_idx = goya_map_pll_idx_to_fw_idx
+ .map_pll_idx_to_fw_idx = goya_map_pll_idx_to_fw_idx,
+ .init_firmware_loader = goya_init_firmware_loader,
+ .init_cpu_scrambler_dram = goya_cpu_init_scrambler_dram
};
/*
diff --git a/drivers/misc/habanalabs/goya/goyaP.h b/drivers/misc/habanalabs/goya/goyaP.h
index ef8c6c8b5c8d..0b05da614729 100644
--- a/drivers/misc/habanalabs/goya/goyaP.h
+++ b/drivers/misc/habanalabs/goya/goyaP.h
@@ -168,7 +168,7 @@ struct goya_device {
u8 device_cpu_mmu_mappings_done;
};
-int goya_get_fixed_properties(struct hl_device *hdev);
+int goya_set_fixed_properties(struct hl_device *hdev);
int goya_mmu_init(struct hl_device *hdev);
void goya_init_dma_qmans(struct hl_device *hdev);
void goya_init_mme_qmans(struct hl_device *hdev);
diff --git a/drivers/misc/habanalabs/goya/goya_coresight.c b/drivers/misc/habanalabs/goya/goya_coresight.c
index 6b7445cca580..c55c100fdd24 100644
--- a/drivers/misc/habanalabs/goya/goya_coresight.c
+++ b/drivers/misc/habanalabs/goya/goya_coresight.c
@@ -434,7 +434,7 @@ static int goya_config_etr(struct hl_device *hdev,
WREG32(mmPSOC_ETR_BUFWM, 0x3FFC);
WREG32(mmPSOC_ETR_RSZ, input->buffer_size);
WREG32(mmPSOC_ETR_MODE, input->sink_mode);
- if (hdev->asic_prop.fw_security_disabled) {
+ if (!hdev->asic_prop.fw_security_enabled) {
/* make ETR not privileged */
val = FIELD_PREP(PSOC_ETR_AXICTL_PROTCTRLBIT0_MASK, 0);
/* make ETR non-secured (inverted logic) */
diff --git a/drivers/misc/habanalabs/include/common/cpucp_if.h b/drivers/misc/habanalabs/include/common/cpucp_if.h
index 27cd0ba99aa3..80b1d5a9d9f1 100644
--- a/drivers/misc/habanalabs/include/common/cpucp_if.h
+++ b/drivers/misc/habanalabs/include/common/cpucp_if.h
@@ -84,6 +84,20 @@ struct hl_eq_sm_sei_data {
__u8 pad[3];
};
+enum hl_fw_alive_severity {
+ FW_ALIVE_SEVERITY_MINOR,
+ FW_ALIVE_SEVERITY_CRITICAL
+};
+
+struct hl_eq_fw_alive {
+ __le64 uptime_seconds;
+ __le32 process_id;
+ __le32 thread_id;
+ /* enum hl_fw_alive_severity */
+ __u8 severity;
+ __u8 pad[7];
+};
+
struct hl_eq_entry {
struct hl_eq_header hdr;
union {
@@ -91,6 +105,7 @@ struct hl_eq_entry {
struct hl_eq_hbm_ecc_data hbm_ecc_data;
struct hl_eq_sm_sei_data sm_sei_data;
struct cpucp_pkt_sync_err pkt_sync_err;
+ struct hl_eq_fw_alive fw_alive;
__le64 data[7];
};
};
@@ -103,11 +118,16 @@ struct hl_eq_entry {
#define EQ_CTL_EVENT_TYPE_SHIFT 16
#define EQ_CTL_EVENT_TYPE_MASK 0x03FF0000
+#define EQ_CTL_INDEX_SHIFT 0
+#define EQ_CTL_INDEX_MASK 0x0000FFFF
+
enum pq_init_status {
PQ_INIT_STATUS_NA = 0,
PQ_INIT_STATUS_READY_FOR_CP,
PQ_INIT_STATUS_READY_FOR_HOST,
- PQ_INIT_STATUS_READY_FOR_CP_SINGLE_MSI
+ PQ_INIT_STATUS_READY_FOR_CP_SINGLE_MSI,
+ PQ_INIT_STATUS_LEN_NOT_POWER_OF_TWO_ERR,
+ PQ_INIT_STATUS_ILLEGAL_Q_ADDR_ERR
};
/*
@@ -384,6 +404,20 @@ enum cpucp_packet_id {
#define CPUCP_PKT_RES_PLL_OUT3_SHIFT 48
#define CPUCP_PKT_RES_PLL_OUT3_MASK 0xFFFF000000000000ull
+#define CPUCP_PKT_VAL_PFC_IN1_SHIFT 0
+#define CPUCP_PKT_VAL_PFC_IN1_MASK 0x0000000000000001ull
+#define CPUCP_PKT_VAL_PFC_IN2_SHIFT 1
+#define CPUCP_PKT_VAL_PFC_IN2_MASK 0x000000000000001Eull
+
+#define CPUCP_PKT_VAL_LPBK_IN1_SHIFT 0
+#define CPUCP_PKT_VAL_LPBK_IN1_MASK 0x0000000000000001ull
+#define CPUCP_PKT_VAL_LPBK_IN2_SHIFT 1
+#define CPUCP_PKT_VAL_LPBK_IN2_MASK 0x000000000000001Eull
+
+/* heartbeat status bits */
+#define CPUCP_PKT_HB_STATUS_EQ_FAULT_SHIFT 0
+#define CPUCP_PKT_HB_STATUS_EQ_FAULT_MASK 0x00000001
+
struct cpucp_packet {
union {
__le64 value; /* For SET packets */
@@ -425,6 +459,12 @@ struct cpucp_packet {
/* For get CpuCP info/EEPROM data/NIC info */
__le32 data_max_size;
+
+ /*
+ * For any general status bitmask. Shall be used whenever the
+ * result cannot be used to hold general purpose data.
+ */
+ __le32 status_mask;
};
__le32 reserved;
@@ -629,6 +669,8 @@ struct cpucp_security_info {
* @card_name: card name that will be displayed in HWMON subsystem on the host
* @sec_info: security information
* @pll_map: Bit map of supported PLLs for current ASIC version.
+ * @mme_binning_mask: MME binning mask,
+ * (0 = functional, 1 = binned)
*/
struct cpucp_info {
struct cpucp_sensor sensors[CPUCP_MAX_SENSORS];
@@ -651,6 +693,7 @@ struct cpucp_info {
struct cpucp_security_info sec_info;
__le32 reserved6;
__u8 pll_map[PLL_MAP_LEN];
+ __le64 mme_binning_mask;
};
struct cpucp_mac_addr {
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index e0a259e0495c..fa8a5ad2d438 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -8,7 +8,7 @@
#ifndef HL_BOOT_IF_H
#define HL_BOOT_IF_H
-#define LKD_HARD_RESET_MAGIC 0xED7BD694
+#define LKD_HARD_RESET_MAGIC 0xED7BD694 /* deprecated - do not use */
#define HL_POWER9_HOST_MAGIC 0x1DA30009
#define BOOT_FIT_SRAM_OFFSET 0x200000
@@ -99,6 +99,7 @@
#define CPU_BOOT_ERR0_PLL_FAIL (1 << 12)
#define CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL (1 << 13)
#define CPU_BOOT_ERR0_ENABLED (1 << 31)
+#define CPU_BOOT_ERR1_ENABLED (1 << 31)
/*
* BOOT DEVICE STATUS bits in BOOT_DEVICE_STS registers
@@ -190,6 +191,24 @@
* PLLs.
* Initialized in: linux
*
+ * CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN GIC access permission only from
+ * previleged entity. FW sets this status
+ * bit for host. If this bit is set then
+ * GIC can not be accessed from host.
+ * Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_EQ_INDEX_EN Event Queue (EQ) index is a running
+ * index for each new event sent to host.
+ * This is used as a method in host to
+ * identify that the waiting event in
+ * queue is actually a new event which
+ * was not served before.
+ * Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN Use multiple scratchpad interfaces to
+ * prevent IRQs overriding each other.
+ * Initialized in: linux
+ *
* CPU_BOOT_DEV_STS0_ENABLED Device status register enabled.
* This is a main indication that the
* running FW populates the device status
@@ -218,7 +237,11 @@
#define CPU_BOOT_DEV_STS0_FW_LD_COM_EN (1 << 16)
#define CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN (1 << 17)
#define CPU_BOOT_DEV_STS0_DYN_PLL_EN (1 << 19)
+#define CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN (1 << 20)
+#define CPU_BOOT_DEV_STS0_EQ_INDEX_EN (1 << 21)
+#define CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN (1 << 22)
#define CPU_BOOT_DEV_STS0_ENABLED (1 << 31)
+#define CPU_BOOT_DEV_STS1_ENABLED (1 << 31)
enum cpu_boot_status {
CPU_BOOT_STATUS_NA = 0, /* Default value after reset of chip */
@@ -264,46 +287,98 @@ enum cpu_msg_status {
/* communication registers mapping - consider ABI when changing */
struct cpu_dyn_regs {
- uint32_t cpu_pq_base_addr_low;
- uint32_t cpu_pq_base_addr_high;
- uint32_t cpu_pq_length;
- uint32_t cpu_pq_init_status;
- uint32_t cpu_eq_base_addr_low;
- uint32_t cpu_eq_base_addr_high;
- uint32_t cpu_eq_length;
- uint32_t cpu_eq_ci;
- uint32_t cpu_cq_base_addr_low;
- uint32_t cpu_cq_base_addr_high;
- uint32_t cpu_cq_length;
- uint32_t cpu_pf_pq_pi;
- uint32_t cpu_boot_dev_sts0;
- uint32_t cpu_boot_dev_sts1;
- uint32_t cpu_boot_err0;
- uint32_t cpu_boot_err1;
- uint32_t cpu_boot_status;
- uint32_t fw_upd_sts;
- uint32_t fw_upd_cmd;
- uint32_t fw_upd_pending_sts;
- uint32_t fuse_ver_offset;
- uint32_t preboot_ver_offset;
- uint32_t uboot_ver_offset;
- uint32_t hw_state;
- uint32_t kmd_msg_to_cpu;
- uint32_t cpu_cmd_status_to_host;
- uint32_t reserved1[32]; /* reserve for future use */
+ __le32 cpu_pq_base_addr_low;
+ __le32 cpu_pq_base_addr_high;
+ __le32 cpu_pq_length;
+ __le32 cpu_pq_init_status;
+ __le32 cpu_eq_base_addr_low;
+ __le32 cpu_eq_base_addr_high;
+ __le32 cpu_eq_length;
+ __le32 cpu_eq_ci;
+ __le32 cpu_cq_base_addr_low;
+ __le32 cpu_cq_base_addr_high;
+ __le32 cpu_cq_length;
+ __le32 cpu_pf_pq_pi;
+ __le32 cpu_boot_dev_sts0;
+ __le32 cpu_boot_dev_sts1;
+ __le32 cpu_boot_err0;
+ __le32 cpu_boot_err1;
+ __le32 cpu_boot_status;
+ __le32 fw_upd_sts;
+ __le32 fw_upd_cmd;
+ __le32 fw_upd_pending_sts;
+ __le32 fuse_ver_offset;
+ __le32 preboot_ver_offset;
+ __le32 uboot_ver_offset;
+ __le32 hw_state;
+ __le32 kmd_msg_to_cpu;
+ __le32 cpu_cmd_status_to_host;
+ union {
+ __le32 gic_host_irq_ctrl;
+ __le32 gic_host_pi_upd_irq;
+ };
+ __le32 gic_tpc_qm_irq_ctrl;
+ __le32 gic_mme_qm_irq_ctrl;
+ __le32 gic_dma_qm_irq_ctrl;
+ __le32 gic_nic_qm_irq_ctrl;
+ __le32 gic_dma_core_irq_ctrl;
+ __le32 gic_host_halt_irq;
+ __le32 gic_host_ints_irq;
+ __le32 reserved1[24]; /* reserve for future use */
};
+/* TODO: remove the desc magic after the code is updated to use message */
/* HCDM - Habana Communications Descriptor Magic */
#define HL_COMMS_DESC_MAGIC 0x4843444D
#define HL_COMMS_DESC_VER 1
+/* HCMv - Habana Communications Message + header version */
+#define HL_COMMS_MSG_MAGIC_VALUE 0x48434D00
+#define HL_COMMS_MSG_MAGIC_MASK 0xFFFFFF00
+#define HL_COMMS_MSG_MAGIC_VER_MASK 0xFF
+
+#define HL_COMMS_MSG_MAGIC_VER(ver) (HL_COMMS_MSG_MAGIC_VALUE | \
+ ((ver) & HL_COMMS_MSG_MAGIC_VER_MASK))
+#define HL_COMMS_MSG_MAGIC_V0 HL_COMMS_DESC_MAGIC
+#define HL_COMMS_MSG_MAGIC_V1 HL_COMMS_MSG_MAGIC_VER(1)
+
+#define HL_COMMS_MSG_MAGIC HL_COMMS_MSG_MAGIC_V1
+
+#define HL_COMMS_MSG_MAGIC_VALIDATE_MAGIC(magic) \
+ (((magic) & HL_COMMS_MSG_MAGIC_MASK) == \
+ HL_COMMS_MSG_MAGIC_VALUE)
+
+#define HL_COMMS_MSG_MAGIC_VALIDATE_VERSION(magic, ver) \
+ (((magic) & HL_COMMS_MSG_MAGIC_VER_MASK) >= \
+ ((ver) & HL_COMMS_MSG_MAGIC_VER_MASK))
+
+#define HL_COMMS_MSG_MAGIC_VALIDATE(magic, ver) \
+ (HL_COMMS_MSG_MAGIC_VALIDATE_MAGIC((magic)) && \
+ HL_COMMS_MSG_MAGIC_VALIDATE_VERSION((magic), (ver)))
+
+enum comms_msg_type {
+ HL_COMMS_DESC_TYPE = 0,
+ HL_COMMS_RESET_CAUSE_TYPE = 1,
+};
+
+/* TODO: remove this struct after the code is updated to use message */
/* this is the comms descriptor header - meta data */
struct comms_desc_header {
- uint32_t magic; /* magic for validation */
- uint32_t crc32; /* CRC32 of the descriptor w/o header */
- uint16_t size; /* size of the descriptor w/o header */
- uint8_t version; /* descriptor version */
- uint8_t reserved[5]; /* pad to 64 bit */
+ __le32 magic; /* magic for validation */
+ __le32 crc32; /* CRC32 of the descriptor w/o header */
+ __le16 size; /* size of the descriptor w/o header */
+ __u8 version; /* descriptor version */
+ __u8 reserved[5]; /* pad to 64 bit */
+};
+
+/* this is the comms message header - meta data */
+struct comms_msg_header {
+ __le32 magic; /* magic for validation */
+ __le32 crc32; /* CRC32 of the message w/o header */
+ __le16 size; /* size of the message w/o header */
+ __u8 version; /* message payload version */
+ __u8 type; /* message type */
+ __u8 reserved[4]; /* pad to 64 bit */
};
/* this is the main FW descriptor - consider ABI when changing */
@@ -314,7 +389,36 @@ struct lkd_fw_comms_desc {
char cur_fw_ver[VERSION_MAX_LEN];
/* can be used for 1 more version w/o ABI change */
char reserved0[VERSION_MAX_LEN];
- uint64_t img_addr; /* address for next FW component load */
+ __le64 img_addr; /* address for next FW component load */
+};
+
+enum comms_reset_cause {
+ HL_RESET_CAUSE_UNKNOWN = 0,
+ HL_RESET_CAUSE_HEARTBEAT = 1,
+ HL_RESET_CAUSE_TDR = 2,
+};
+
+/* TODO: remove define after struct name is aligned on all projects */
+#define lkd_msg_comms lkd_fw_comms_msg
+
+/* this is the comms message descriptor */
+struct lkd_fw_comms_msg {
+ struct comms_msg_header header;
+ /* union for future expantions of new messages */
+ union {
+ struct {
+ struct cpu_dyn_regs cpu_dyn_regs;
+ char fuse_ver[VERSION_MAX_LEN];
+ char cur_fw_ver[VERSION_MAX_LEN];
+ /* can be used for 1 more version w/o ABI change */
+ char reserved0[VERSION_MAX_LEN];
+ /* address for next FW component load */
+ __le64 img_addr;
+ };
+ struct {
+ __u8 reset_cause;
+ };
+ };
};
/*
@@ -386,11 +490,11 @@ enum comms_cmd {
struct comms_command {
union { /* bit fields are only for FW use */
struct {
- unsigned int size :25; /* 32MB max. */
- unsigned int reserved :2;
+ u32 size :25; /* 32MB max. */
+ u32 reserved :2;
enum comms_cmd cmd :5; /* 32 commands */
};
- unsigned int val;
+ __le32 val;
};
};
@@ -449,11 +553,11 @@ enum comms_ram_types {
struct comms_status {
union { /* bit fields are only for FW use */
struct {
- unsigned int offset :26;
- unsigned int ram_type :2;
+ u32 offset :26;
+ enum comms_ram_types ram_type :2;
enum comms_sts status :4; /* 16 statuses */
};
- unsigned int val;
+ __le32 val;
};
};
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_async_events.h b/drivers/misc/habanalabs/include/gaudi/gaudi_async_events.h
index e8651abf84f2..d966bd4dfea6 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_async_events.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_async_events.h
@@ -252,10 +252,11 @@ enum gaudi_async_event_id {
GAUDI_EVENT_HBM3_SPI_0 = 407,
GAUDI_EVENT_HBM3_SPI_1 = 408,
GAUDI_EVENT_PSOC_GPIO_U16_0 = 421,
- GAUDI_EVENT_PI_UPDATE = 484,
- GAUDI_EVENT_HALT_MACHINE = 485,
- GAUDI_EVENT_INTS_REGISTER = 486,
- GAUDI_EVENT_SOFT_RESET = 487,
+ GAUDI_EVENT_NIC0_CS_DBG_DERR = 483,
+ GAUDI_EVENT_NIC1_CS_DBG_DERR = 487,
+ GAUDI_EVENT_NIC2_CS_DBG_DERR = 491,
+ GAUDI_EVENT_NIC3_CS_DBG_DERR = 495,
+ GAUDI_EVENT_NIC4_CS_DBG_DERR = 499,
GAUDI_EVENT_RAZWI_OR_ADC = 548,
GAUDI_EVENT_TPC0_QM = 572,
GAUDI_EVENT_TPC1_QM = 573,
@@ -303,6 +304,11 @@ enum gaudi_async_event_id {
GAUDI_EVENT_NIC3_QP1 = 619,
GAUDI_EVENT_NIC4_QP0 = 620,
GAUDI_EVENT_NIC4_QP1 = 621,
+ GAUDI_EVENT_PI_UPDATE = 635,
+ GAUDI_EVENT_HALT_MACHINE = 636,
+ GAUDI_EVENT_INTS_REGISTER = 637,
+ GAUDI_EVENT_SOFT_RESET = 638,
+ GAUDI_EVENT_FW_ALIVE_S = 645,
GAUDI_EVENT_DEV_RESET_REQ = 646,
GAUDI_EVENT_PKT_QUEUE_OUT_SYNC = 647,
GAUDI_EVENT_FIX_POWER_ENV_S = 658,
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_async_ids_map_extended.h b/drivers/misc/habanalabs/include/gaudi/gaudi_async_ids_map_extended.h
index 3dc79c131805..479b6b038254 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_async_ids_map_extended.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_async_ids_map_extended.h
@@ -507,23 +507,28 @@ static struct gaudi_async_events_ids_map gaudi_irq_map_table[] = {
{ .fc_id = 480, .cpu_id = 329, .valid = 0, .name = "" },
{ .fc_id = 481, .cpu_id = 330, .valid = 0, .name = "" },
{ .fc_id = 482, .cpu_id = 331, .valid = 0, .name = "" },
- { .fc_id = 483, .cpu_id = 332, .valid = 0, .name = "" },
- { .fc_id = 484, .cpu_id = 333, .valid = 1, .name = "PI_UPDATE" },
- { .fc_id = 485, .cpu_id = 334, .valid = 1, .name = "HALT_MACHINE" },
- { .fc_id = 486, .cpu_id = 335, .valid = 1, .name = "INTS_REGISTER" },
- { .fc_id = 487, .cpu_id = 336, .valid = 1, .name = "SOFT_RESET" },
+ { .fc_id = 483, .cpu_id = 332, .valid = 1,
+ .name = "NIC0_CS_DBG_DERR" },
+ { .fc_id = 484, .cpu_id = 333, .valid = 0, .name = "" },
+ { .fc_id = 485, .cpu_id = 334, .valid = 0, .name = "" },
+ { .fc_id = 486, .cpu_id = 335, .valid = 0, .name = "" },
+ { .fc_id = 487, .cpu_id = 336, .valid = 1,
+ .name = "NIC1_CS_DBG_DERR" },
{ .fc_id = 488, .cpu_id = 337, .valid = 0, .name = "" },
{ .fc_id = 489, .cpu_id = 338, .valid = 0, .name = "" },
{ .fc_id = 490, .cpu_id = 339, .valid = 0, .name = "" },
- { .fc_id = 491, .cpu_id = 340, .valid = 0, .name = "" },
+ { .fc_id = 491, .cpu_id = 340, .valid = 1,
+ .name = "NIC2_CS_DBG_DERR" },
{ .fc_id = 492, .cpu_id = 341, .valid = 0, .name = "" },
{ .fc_id = 493, .cpu_id = 342, .valid = 0, .name = "" },
{ .fc_id = 494, .cpu_id = 343, .valid = 0, .name = "" },
- { .fc_id = 495, .cpu_id = 344, .valid = 0, .name = "" },
+ { .fc_id = 495, .cpu_id = 344, .valid = 1,
+ .name = "NIC3_CS_DBG_DERR" },
{ .fc_id = 496, .cpu_id = 345, .valid = 0, .name = "" },
{ .fc_id = 497, .cpu_id = 346, .valid = 0, .name = "" },
{ .fc_id = 498, .cpu_id = 347, .valid = 0, .name = "" },
- { .fc_id = 499, .cpu_id = 348, .valid = 0, .name = "" },
+ { .fc_id = 499, .cpu_id = 348, .valid = 1,
+ .name = "NIC4_CS_DBG_DERR" },
{ .fc_id = 500, .cpu_id = 349, .valid = 0, .name = "" },
{ .fc_id = 501, .cpu_id = 350, .valid = 0, .name = "" },
{ .fc_id = 502, .cpu_id = 351, .valid = 0, .name = "" },
@@ -659,17 +664,17 @@ static struct gaudi_async_events_ids_map gaudi_irq_map_table[] = {
{ .fc_id = 632, .cpu_id = 481, .valid = 0, .name = "" },
{ .fc_id = 633, .cpu_id = 482, .valid = 0, .name = "" },
{ .fc_id = 634, .cpu_id = 483, .valid = 0, .name = "" },
- { .fc_id = 635, .cpu_id = 484, .valid = 0, .name = "" },
- { .fc_id = 636, .cpu_id = 485, .valid = 0, .name = "" },
- { .fc_id = 637, .cpu_id = 486, .valid = 0, .name = "" },
- { .fc_id = 638, .cpu_id = 487, .valid = 0, .name = "" },
+ { .fc_id = 635, .cpu_id = 484, .valid = 1, .name = "PI_UPDATE" },
+ { .fc_id = 636, .cpu_id = 485, .valid = 1, .name = "HALT_MACHINE" },
+ { .fc_id = 637, .cpu_id = 486, .valid = 1, .name = "INTS_REGISTER" },
+ { .fc_id = 638, .cpu_id = 487, .valid = 1, .name = "SOFT_RESET" },
{ .fc_id = 639, .cpu_id = 488, .valid = 0, .name = "" },
{ .fc_id = 640, .cpu_id = 489, .valid = 0, .name = "" },
{ .fc_id = 641, .cpu_id = 490, .valid = 0, .name = "" },
{ .fc_id = 642, .cpu_id = 491, .valid = 0, .name = "" },
{ .fc_id = 643, .cpu_id = 492, .valid = 0, .name = "" },
{ .fc_id = 644, .cpu_id = 493, .valid = 0, .name = "" },
- { .fc_id = 645, .cpu_id = 494, .valid = 0, .name = "" },
+ { .fc_id = 645, .cpu_id = 494, .valid = 1, .name = "FW_ALIVE_S" },
{ .fc_id = 646, .cpu_id = 495, .valid = 1, .name = "DEV_RESET_REQ" },
{ .fc_id = 647, .cpu_id = 496, .valid = 1,
.name = "PKT_QUEUE_OUT_SYNC" },
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h b/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
index a9f51f9f9e92..34ca4fe50d91 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
@@ -20,6 +20,9 @@
#define UBOOT_FW_OFFSET 0x100000 /* 1MB in SRAM */
#define LINUX_FW_OFFSET 0x800000 /* 8MB in HBM */
+/* HBM thermal delta in [Deg] added to composite (CTemp) */
+#define HBM_TEMP_ADJUST_COEFF 6
+
enum gaudi_nic_axi_error {
RXB,
RXE,
@@ -27,6 +30,7 @@ enum gaudi_nic_axi_error {
TXE,
QPC_RESP,
NON_AXI_ERR,
+ TMR,
};
/*
@@ -42,6 +46,48 @@ struct eq_nic_sei_event {
__u8 pad[6];
};
+/*
+ * struct gaudi_nic_status - describes the status of a NIC port.
+ * @port: NIC port index.
+ * @bad_format_cnt: e.g. CRC.
+ * @responder_out_of_sequence_psn_cnt: e.g NAK.
+ * @high_ber_reinit_cnt: link reinit due to high BER.
+ * @correctable_err_cnt: e.g. bit-flip.
+ * @uncorrectable_err_cnt: e.g. MAC errors.
+ * @retraining_cnt: re-training counter.
+ * @up: is port up.
+ * @pcs_link: has PCS link.
+ * @phy_ready: is PHY ready.
+ * @auto_neg: is Autoneg enabled.
+ * @timeout_retransmission_cnt: timeout retransmission events
+ * @high_ber_cnt: high ber events
+ */
+struct gaudi_nic_status {
+ __u32 port;
+ __u32 bad_format_cnt;
+ __u32 responder_out_of_sequence_psn_cnt;
+ __u32 high_ber_reinit;
+ __u32 correctable_err_cnt;
+ __u32 uncorrectable_err_cnt;
+ __u32 retraining_cnt;
+ __u8 up;
+ __u8 pcs_link;
+ __u8 phy_ready;
+ __u8 auto_neg;
+ __u32 timeout_retransmission_cnt;
+ __u32 high_ber_cnt;
+};
+
+struct gaudi_flops_2_data {
+ union {
+ struct {
+ __u32 spsram_init_done : 1;
+ __u32 reserved : 31;
+ };
+ __u32 data;
+ };
+};
+
#define GAUDI_PLL_FREQ_LOW 200000000 /* 200 MHz */
#endif /* GAUDI_FW_IF_H */
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h b/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
index b53aeda9a982..9aea7e996654 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
@@ -66,7 +66,8 @@
#define PCI_DMA_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK (\
(FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_PQF_STOP_ON_ERR_MASK, 0xF)) | \
(FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_CQF_STOP_ON_ERR_MASK, 0xF)) | \
- (FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0xF)))
+ (FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0xF)) | \
+ (FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_ARB_STOP_ON_ERR_MASK, 0x1)))
#define HBM_DMA_QMAN_GLBL_ERR_CFG_MSG_EN_MASK (\
(FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_PQF_ERR_MSG_EN_MASK, 0xF)) | \
@@ -76,7 +77,8 @@
#define HBM_DMA_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK (\
(FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_PQF_STOP_ON_ERR_MASK, 0xF)) | \
(FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_CQF_STOP_ON_ERR_MASK, 0x1F)) | \
- (FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0x1F)))
+ (FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0x1F)) | \
+ (FIELD_PREP(DMA0_QM_GLBL_ERR_CFG_ARB_STOP_ON_ERR_MASK, 0x1)))
#define TPC_QMAN_GLBL_ERR_CFG_MSG_EN_MASK (\
(FIELD_PREP(TPC0_QM_GLBL_ERR_CFG_PQF_ERR_MSG_EN_MASK, 0xF)) | \
@@ -86,7 +88,8 @@
#define TPC_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK (\
(FIELD_PREP(TPC0_QM_GLBL_ERR_CFG_PQF_STOP_ON_ERR_MASK, 0xF)) | \
(FIELD_PREP(TPC0_QM_GLBL_ERR_CFG_CQF_STOP_ON_ERR_MASK, 0x1F)) | \
- (FIELD_PREP(TPC0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0x1F)))
+ (FIELD_PREP(TPC0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0x1F)) | \
+ (FIELD_PREP(TPC0_QM_GLBL_ERR_CFG_ARB_STOP_ON_ERR_MASK, 0x1)))
#define MME_QMAN_GLBL_ERR_CFG_MSG_EN_MASK (\
(FIELD_PREP(MME0_QM_GLBL_ERR_CFG_PQF_ERR_MSG_EN_MASK, 0xF)) | \
@@ -96,7 +99,8 @@
#define MME_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK (\
(FIELD_PREP(MME0_QM_GLBL_ERR_CFG_PQF_STOP_ON_ERR_MASK, 0xF)) | \
(FIELD_PREP(MME0_QM_GLBL_ERR_CFG_CQF_STOP_ON_ERR_MASK, 0x1F)) | \
- (FIELD_PREP(MME0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0x1F)))
+ (FIELD_PREP(MME0_QM_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0x1F)) | \
+ (FIELD_PREP(MME0_QM_GLBL_ERR_CFG_ARB_STOP_ON_ERR_MASK, 0x1)))
#define NIC_QMAN_GLBL_ERR_CFG_MSG_EN_MASK (\
(FIELD_PREP(NIC0_QM0_GLBL_ERR_CFG_PQF_ERR_MSG_EN_MASK, 0xF)) | \
@@ -106,7 +110,8 @@
#define NIC_QMAN_GLBL_ERR_CFG_STOP_ON_ERR_EN_MASK (\
(FIELD_PREP(NIC0_QM0_GLBL_ERR_CFG_PQF_STOP_ON_ERR_MASK, 0xF)) | \
(FIELD_PREP(NIC0_QM0_GLBL_ERR_CFG_CQF_STOP_ON_ERR_MASK, 0xF)) | \
- (FIELD_PREP(NIC0_QM0_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0xF)))
+ (FIELD_PREP(NIC0_QM0_GLBL_ERR_CFG_CP_STOP_ON_ERR_MASK, 0xF)) | \
+ (FIELD_PREP(NIC0_QM0_GLBL_ERR_CFG_ARB_STOP_ON_ERR_MASK, 0x1)))
#define QMAN_CGM1_PWR_GATE_EN (FIELD_PREP(DMA0_QM_CGM_CFG1_MASK_TH_MASK, 0xA))
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h b/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
index 137afedf5f15..d95d4162ae2c 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
@@ -12,6 +12,16 @@
* PSOC scratch-pad registers
*/
#define mmHW_STATE mmPSOC_GLOBAL_CONF_SCRATCHPAD_0
+/* TODO: remove mmGIC_HOST_IRQ_CTRL_POLL_REG */
+#define mmGIC_HOST_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
+#define mmGIC_HOST_PI_UPD_IRQ_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
+#define mmGIC_TPC_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_2
+#define mmGIC_MME_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_3
+#define mmGIC_DMA_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_4
+#define mmGIC_NIC_QM_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_5
+#define mmGIC_DMA_CR_IRQ_CTRL_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_6
+#define mmGIC_HOST_HALT_IRQ_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_7
+#define mmGIC_HOST_INTS_IRQ_POLL_REG mmPSOC_GLOBAL_CONF_SCRATCHPAD_8
#define mmCPU_BOOT_DEV_STS0 mmPSOC_GLOBAL_CONF_SCRATCHPAD_20
#define mmCPU_BOOT_DEV_STS1 mmPSOC_GLOBAL_CONF_SCRATCHPAD_21
#define mmFUSE_VER_OFFSET mmPSOC_GLOBAL_CONF_SCRATCHPAD_22
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index fea3ae9d8686..8d00df9243c4 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -693,6 +693,8 @@ static int ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
{
int bar;
unsigned long off;
+ u8 pci_rev_id;
+ int rc;
/* map the memory mapped i/o registers */
hw->mmio_vaddr = pci_iomap(pdev, 1, 0);
@@ -702,7 +704,13 @@ static int ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
}
/* map the adapter shared memory region */
- if (pdev->subsystem_device == 0x00E4) {
+ rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev_id);
+ if (rc != 0) {
+ dev_err(&pdev->dev, "Error reading PCI rev id: %d\n", rc);
+ goto out;
+ }
+
+ if (pci_rev_id >= PCI_REV_ID_NECHES) {
bar = 5;
/* Last 8k is reserved for CCBs */
off = pci_resource_len(pdev, bar) - 0x2000;
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
index f69ff645cac9..d57c34680b09 100644
--- a/drivers/misc/hpilo.h
+++ b/drivers/misc/hpilo.h
@@ -10,6 +10,9 @@
#define ILO_NAME "hpilo"
+/* iLO ASIC PCI revision id */
+#define PCI_REV_ID_NECHES 7
+
/* max number of open channel control blocks per device, hw limited to 32 */
#define MAX_CCB 24
/* min number of open channel control blocks per device, hw limited to 32 */
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 4edad6c445d3..dc8a06c06c63 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -111,7 +111,7 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
result = ibmasm_init_remote_input_dev(sp);
if (result) {
dev_err(sp->dev, "Failed to initialize remote queue\n");
- goto error_send_message;
+ goto error_init_remote;
}
result = ibmasm_send_driver_vpd(sp);
@@ -131,8 +131,9 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;
error_send_message:
- disable_sp_interrupts(sp->base_address);
ibmasm_free_remote_input_dev(sp);
+error_init_remote:
+ disable_sp_interrupts(sp->base_address);
free_irq(sp->irq, (void *)sp);
error_request_irq:
iounmap(sp->base_address);
diff --git a/drivers/misc/ibmasm/remote.h b/drivers/misc/ibmasm/remote.h
index 8d364462aeea..ec4e78ec5a67 100644
--- a/drivers/misc/ibmasm/remote.h
+++ b/drivers/misc/ibmasm/remote.h
@@ -43,7 +43,7 @@
#define REMOTE_BUTTON_MIDDLE 0x02
#define REMOTE_BUTTON_RIGHT 0x04
-/* size of keysym/keycode translation matricies */
+/* size of keysym/keycode translation matrices */
#define XLATE_SIZE 256
struct mouse_input {
diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
index a164896dc6d4..88c218a9f8b3 100644
--- a/drivers/misc/lkdtm/bugs.c
+++ b/drivers/misc/lkdtm/bugs.c
@@ -161,6 +161,9 @@ void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void)
if (*p == 0)
val = 0x87654321;
*p = val;
+
+ if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
+ pr_err("XFAIL: arch has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS\n");
}
void lkdtm_SOFTLOCKUP(void)
@@ -300,8 +303,10 @@ void lkdtm_CORRUPT_LIST_ADD(void)
if (target[0] == NULL && target[1] == NULL)
pr_err("Overwrite did not happen, but no BUG?!\n");
- else
+ else {
pr_err("list_add() corruption not detected!\n");
+ pr_expected_config(CONFIG_DEBUG_LIST);
+ }
}
void lkdtm_CORRUPT_LIST_DEL(void)
@@ -325,8 +330,10 @@ void lkdtm_CORRUPT_LIST_DEL(void)
if (target[0] == NULL && target[1] == NULL)
pr_err("Overwrite did not happen, but no BUG?!\n");
- else
+ else {
pr_err("list_del() corruption not detected!\n");
+ pr_expected_config(CONFIG_DEBUG_LIST);
+ }
}
/* Test that VMAP_STACK is actually allocating with a leading guard page */
diff --git a/drivers/misc/lkdtm/cfi.c b/drivers/misc/lkdtm/cfi.c
index e73ebdbfa806..c9aeddef1044 100644
--- a/drivers/misc/lkdtm/cfi.c
+++ b/drivers/misc/lkdtm/cfi.c
@@ -38,5 +38,6 @@ void lkdtm_CFI_FORWARD_PROTO(void)
func = (void *)lkdtm_increment_int;
func(&called_count);
- pr_info("Fail: survived mismatched prototype function call!\n");
+ pr_err("FAIL: survived mismatched prototype function call!\n");
+ pr_expected_config(CONFIG_CFI_CLANG);
}
diff --git a/drivers/misc/lkdtm/core.c b/drivers/misc/lkdtm/core.c
index 8024b6a5cc7f..9dda87c6b54a 100644
--- a/drivers/misc/lkdtm/core.c
+++ b/drivers/misc/lkdtm/core.c
@@ -26,6 +26,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/debugfs.h>
+#include <linux/init.h>
#define DEFAULT_COUNT 10
@@ -120,11 +121,14 @@ static const struct crashtype crashtypes[] = {
CRASHTYPE(UNALIGNED_LOAD_STORE_WRITE),
CRASHTYPE(FORTIFY_OBJECT),
CRASHTYPE(FORTIFY_SUBOBJECT),
- CRASHTYPE(OVERWRITE_ALLOCATION),
+ CRASHTYPE(SLAB_LINEAR_OVERFLOW),
+ CRASHTYPE(VMALLOC_LINEAR_OVERFLOW),
CRASHTYPE(WRITE_AFTER_FREE),
CRASHTYPE(READ_AFTER_FREE),
CRASHTYPE(WRITE_BUDDY_AFTER_FREE),
CRASHTYPE(READ_BUDDY_AFTER_FREE),
+ CRASHTYPE(SLAB_INIT_ON_ALLOC),
+ CRASHTYPE(BUDDY_INIT_ON_ALLOC),
CRASHTYPE(SLAB_FREE_DOUBLE),
CRASHTYPE(SLAB_FREE_CROSS),
CRASHTYPE(SLAB_FREE_PAGE),
@@ -177,9 +181,7 @@ static const struct crashtype crashtypes[] = {
CRASHTYPE(STACKLEAK_ERASING),
CRASHTYPE(CFI_FORWARD_PROTO),
CRASHTYPE(FORTIFIED_STRSCPY),
-#ifdef CONFIG_X86_32
CRASHTYPE(DOUBLE_FAULT),
-#endif
#ifdef CONFIG_PPC_BOOK3S_64
CRASHTYPE(PPC_SLB_MULTIHIT),
#endif
@@ -399,6 +401,56 @@ static ssize_t direct_entry(struct file *f, const char __user *user_buf,
return count;
}
+#ifndef MODULE
+/*
+ * To avoid needing to export parse_args(), just don't use this code
+ * when LKDTM is built as a module.
+ */
+struct check_cmdline_args {
+ const char *param;
+ int value;
+};
+
+static int lkdtm_parse_one(char *param, char *val,
+ const char *unused, void *arg)
+{
+ struct check_cmdline_args *args = arg;
+
+ /* short circuit if we already found a value. */
+ if (args->value != -ESRCH)
+ return 0;
+ if (strncmp(param, args->param, strlen(args->param)) == 0) {
+ bool bool_result;
+ int ret;
+
+ ret = kstrtobool(val, &bool_result);
+ if (ret == 0)
+ args->value = bool_result;
+ }
+ return 0;
+}
+
+int lkdtm_check_bool_cmdline(const char *param)
+{
+ char *command_line;
+ struct check_cmdline_args args = {
+ .param = param,
+ .value = -ESRCH,
+ };
+
+ command_line = kstrdup(saved_command_line, GFP_KERNEL);
+ if (!command_line)
+ return -ENOMEM;
+
+ parse_args("Setting sysctl args", command_line,
+ NULL, 0, -1, -1, &args, lkdtm_parse_one);
+
+ kfree(command_line);
+
+ return args.value;
+}
+#endif
+
static struct dentry *lkdtm_debugfs_root;
static int __init lkdtm_module_init(void)
diff --git a/drivers/misc/lkdtm/fortify.c b/drivers/misc/lkdtm/fortify.c
index faf29cf04baa..0f51d31b57ca 100644
--- a/drivers/misc/lkdtm/fortify.c
+++ b/drivers/misc/lkdtm/fortify.c
@@ -76,7 +76,8 @@ void lkdtm_FORTIFIED_STRSCPY(void)
*/
strscpy(dst, src, strlen(src));
- pr_warn("FAIL: No overflow in above strscpy()\n");
+ pr_err("FAIL: strscpy() overflow not detected!\n");
+ pr_expected_config(CONFIG_FORTIFY_SOURCE);
kfree(src);
}
diff --git a/drivers/misc/lkdtm/heap.c b/drivers/misc/lkdtm/heap.c
index 1323bc16f113..3d9aae5821a0 100644
--- a/drivers/misc/lkdtm/heap.c
+++ b/drivers/misc/lkdtm/heap.c
@@ -5,6 +5,7 @@
*/
#include "lkdtm.h"
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/sched.h>
static struct kmem_cache *double_free_cache;
@@ -12,17 +13,36 @@ static struct kmem_cache *a_cache;
static struct kmem_cache *b_cache;
/*
+ * If there aren't guard pages, it's likely that a consecutive allocation will
+ * let us overflow into the second allocation without overwriting something real.
+ */
+void lkdtm_VMALLOC_LINEAR_OVERFLOW(void)
+{
+ char *one, *two;
+
+ one = vzalloc(PAGE_SIZE);
+ two = vzalloc(PAGE_SIZE);
+
+ pr_info("Attempting vmalloc linear overflow ...\n");
+ memset(one, 0xAA, PAGE_SIZE + 1);
+
+ vfree(two);
+ vfree(one);
+}
+
+/*
* This tries to stay within the next largest power-of-2 kmalloc cache
* to avoid actually overwriting anything important if it's not detected
* correctly.
*/
-void lkdtm_OVERWRITE_ALLOCATION(void)
+void lkdtm_SLAB_LINEAR_OVERFLOW(void)
{
size_t len = 1020;
u32 *data = kmalloc(len, GFP_KERNEL);
if (!data)
return;
+ pr_info("Attempting slab linear overflow ...\n");
data[1024 / sizeof(u32)] = 0x12345678;
kfree(data);
}
@@ -89,9 +109,10 @@ void lkdtm_READ_AFTER_FREE(void)
if (saw != *val) {
/* Good! Poisoning happened, so declare a win. */
pr_info("Memory correctly poisoned (%x)\n", saw);
- BUG();
+ } else {
+ pr_err("FAIL: Memory was not poisoned!\n");
+ pr_expected_config_param(CONFIG_INIT_ON_FREE_DEFAULT_ON, "init_on_free");
}
- pr_info("Memory was not poisoned\n");
kfree(val);
}
@@ -145,13 +166,79 @@ void lkdtm_READ_BUDDY_AFTER_FREE(void)
if (saw != *val) {
/* Good! Poisoning happened, so declare a win. */
pr_info("Memory correctly poisoned (%x)\n", saw);
- BUG();
+ } else {
+ pr_err("FAIL: Buddy page was not poisoned!\n");
+ pr_expected_config_param(CONFIG_INIT_ON_FREE_DEFAULT_ON, "init_on_free");
+ }
+
+ kfree(val);
+}
+
+void lkdtm_SLAB_INIT_ON_ALLOC(void)
+{
+ u8 *first;
+ u8 *val;
+
+ first = kmalloc(512, GFP_KERNEL);
+ if (!first) {
+ pr_info("Unable to allocate 512 bytes the first time.\n");
+ return;
+ }
+
+ memset(first, 0xAB, 512);
+ kfree(first);
+
+ val = kmalloc(512, GFP_KERNEL);
+ if (!val) {
+ pr_info("Unable to allocate 512 bytes the second time.\n");
+ return;
+ }
+ if (val != first) {
+ pr_warn("Reallocation missed clobbered memory.\n");
}
- pr_info("Buddy page was not poisoned\n");
+ if (memchr(val, 0xAB, 512) == NULL) {
+ pr_info("Memory appears initialized (%x, no earlier values)\n", *val);
+ } else {
+ pr_err("FAIL: Slab was not initialized\n");
+ pr_expected_config_param(CONFIG_INIT_ON_ALLOC_DEFAULT_ON, "init_on_alloc");
+ }
kfree(val);
}
+void lkdtm_BUDDY_INIT_ON_ALLOC(void)
+{
+ u8 *first;
+ u8 *val;
+
+ first = (u8 *)__get_free_page(GFP_KERNEL);
+ if (!first) {
+ pr_info("Unable to allocate first free page\n");
+ return;
+ }
+
+ memset(first, 0xAB, PAGE_SIZE);
+ free_page((unsigned long)first);
+
+ val = (u8 *)__get_free_page(GFP_KERNEL);
+ if (!val) {
+ pr_info("Unable to allocate second free page\n");
+ return;
+ }
+
+ if (val != first) {
+ pr_warn("Reallocation missed clobbered memory.\n");
+ }
+
+ if (memchr(val, 0xAB, PAGE_SIZE) == NULL) {
+ pr_info("Memory appears initialized (%x, no earlier values)\n", *val);
+ } else {
+ pr_err("FAIL: Slab was not initialized\n");
+ pr_expected_config_param(CONFIG_INIT_ON_ALLOC_DEFAULT_ON, "init_on_alloc");
+ }
+ free_page((unsigned long)val);
+}
+
void lkdtm_SLAB_FREE_DOUBLE(void)
{
int *val;
diff --git a/drivers/misc/lkdtm/lkdtm.h b/drivers/misc/lkdtm/lkdtm.h
index 99f90d3e5e9c..6a30b60519f3 100644
--- a/drivers/misc/lkdtm/lkdtm.h
+++ b/drivers/misc/lkdtm/lkdtm.h
@@ -6,6 +6,47 @@
#include <linux/kernel.h>
+#define pr_expected_config(kconfig) \
+{ \
+ if (IS_ENABLED(kconfig)) \
+ pr_err("Unexpected! This kernel was built with " #kconfig "=y\n"); \
+ else \
+ pr_warn("This is probably expected, since this kernel was built *without* " #kconfig "=y\n"); \
+}
+
+#ifndef MODULE
+int lkdtm_check_bool_cmdline(const char *param);
+#define pr_expected_config_param(kconfig, param) \
+{ \
+ if (IS_ENABLED(kconfig)) { \
+ switch (lkdtm_check_bool_cmdline(param)) { \
+ case 0: \
+ pr_warn("This is probably expected, since this kernel was built with " #kconfig "=y but booted with '" param "=N'\n"); \
+ break; \
+ case 1: \
+ pr_err("Unexpected! This kernel was built with " #kconfig "=y and booted with '" param "=Y'\n"); \
+ break; \
+ default: \
+ pr_err("Unexpected! This kernel was built with " #kconfig "=y (and booted without '" param "' specified)\n"); \
+ } \
+ } else { \
+ switch (lkdtm_check_bool_cmdline(param)) { \
+ case 0: \
+ pr_warn("This is probably expected, as kernel was built *without* " #kconfig "=y and booted with '" param "=N'\n"); \
+ break; \
+ case 1: \
+ pr_err("Unexpected! This kernel was built *without* " #kconfig "=y but booted with '" param "=Y'\n"); \
+ break; \
+ default: \
+ pr_err("This is probably expected, since this kernel was built *without* " #kconfig "=y (and booted without '" param "' specified)\n"); \
+ break; \
+ } \
+ } \
+}
+#else
+#define pr_expected_config_param(kconfig, param) pr_expected_config(kconfig)
+#endif
+
/* bugs.c */
void __init lkdtm_bugs_init(int *recur_param);
void lkdtm_PANIC(void);
@@ -39,11 +80,14 @@ void lkdtm_FORTIFY_SUBOBJECT(void);
/* heap.c */
void __init lkdtm_heap_init(void);
void __exit lkdtm_heap_exit(void);
-void lkdtm_OVERWRITE_ALLOCATION(void);
+void lkdtm_VMALLOC_LINEAR_OVERFLOW(void);
+void lkdtm_SLAB_LINEAR_OVERFLOW(void);
void lkdtm_WRITE_AFTER_FREE(void);
void lkdtm_READ_AFTER_FREE(void);
void lkdtm_WRITE_BUDDY_AFTER_FREE(void);
void lkdtm_READ_BUDDY_AFTER_FREE(void);
+void lkdtm_SLAB_INIT_ON_ALLOC(void);
+void lkdtm_BUDDY_INIT_ON_ALLOC(void);
void lkdtm_SLAB_FREE_DOUBLE(void);
void lkdtm_SLAB_FREE_CROSS(void);
void lkdtm_SLAB_FREE_PAGE(void);
diff --git a/drivers/misc/lkdtm/stackleak.c b/drivers/misc/lkdtm/stackleak.c
index d1a5c0705be3..00db21ff115e 100644
--- a/drivers/misc/lkdtm/stackleak.c
+++ b/drivers/misc/lkdtm/stackleak.c
@@ -74,8 +74,8 @@ void lkdtm_STACKLEAK_ERASING(void)
end:
if (test_failed) {
- pr_err("FAIL: the thread stack is NOT properly erased\n");
- dump_stack();
+ pr_err("FAIL: the thread stack is NOT properly erased!\n");
+ pr_expected_config(CONFIG_GCC_PLUGIN_STACKLEAK);
} else {
pr_info("OK: the rest of the thread stack is properly erased\n");
}
diff --git a/drivers/misc/lkdtm/usercopy.c b/drivers/misc/lkdtm/usercopy.c
index 15d220ef35a5..9161ce7ed47a 100644
--- a/drivers/misc/lkdtm/usercopy.c
+++ b/drivers/misc/lkdtm/usercopy.c
@@ -173,6 +173,8 @@ static void do_usercopy_heap_size(bool to_user)
goto free_user;
}
}
+ pr_err("FAIL: bad usercopy not detected!\n");
+ pr_expected_config_param(CONFIG_HARDENED_USERCOPY, "hardened_usercopy");
free_user:
vm_munmap(user_addr, PAGE_SIZE);
@@ -248,6 +250,8 @@ static void do_usercopy_heap_whitelist(bool to_user)
goto free_user;
}
}
+ pr_err("FAIL: bad usercopy not detected!\n");
+ pr_expected_config_param(CONFIG_HARDENED_USERCOPY, "hardened_usercopy");
free_user:
vm_munmap(user_alloc, PAGE_SIZE);
@@ -319,7 +323,8 @@ void lkdtm_USERCOPY_KERNEL(void)
pr_warn("copy_to_user failed, but lacked Oops\n");
goto free_user;
}
- pr_err("FAIL: survived bad copy_to_user()\n");
+ pr_err("FAIL: bad copy_to_user() not detected!\n");
+ pr_expected_config_param(CONFIG_HARDENED_USERCOPY, "hardened_usercopy");
free_user:
vm_munmap(user_addr, PAGE_SIZE);
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index d8e760b11ae3..67844089db21 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -498,7 +498,7 @@ static struct mei_fixup {
};
/**
- * mei_cldev_fixup - run fixup handlers
+ * mei_cl_bus_dev_fixup - run fixup handlers
*
* @cldev: me client device
*/
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 2cc370adb238..96f4e59c32a5 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -326,7 +326,7 @@ void mei_io_cb_free(struct mei_cl_cb *cb)
}
/**
- * mei_tx_cb_queue - queue tx callback
+ * mei_tx_cb_enqueue - queue tx callback
*
* Locking: called under "dev->device_lock" lock
*
@@ -1726,12 +1726,15 @@ nortpm:
return rets;
}
-static inline u8 mei_ext_hdr_set_vtag(struct mei_ext_hdr *ext, u8 vtag)
+static inline u8 mei_ext_hdr_set_vtag(void *ext, u8 vtag)
{
- ext->type = MEI_EXT_HDR_VTAG;
- ext->ext_payload[0] = vtag;
- ext->length = mei_data2slots(sizeof(*ext));
- return ext->length;
+ struct mei_ext_hdr_vtag *vtag_hdr = ext;
+
+ vtag_hdr->hdr.type = MEI_EXT_HDR_VTAG;
+ vtag_hdr->hdr.length = mei_data2slots(sizeof(*vtag_hdr));
+ vtag_hdr->vtag = vtag;
+ vtag_hdr->reserved = 0;
+ return vtag_hdr->hdr.length;
}
/**
@@ -1745,7 +1748,6 @@ static struct mei_msg_hdr *mei_msg_hdr_init(const struct mei_cl_cb *cb)
{
size_t hdr_len;
struct mei_ext_meta_hdr *meta;
- struct mei_ext_hdr *ext;
struct mei_msg_hdr *mei_hdr;
bool is_ext, is_vtag;
@@ -1764,7 +1766,7 @@ static struct mei_msg_hdr *mei_msg_hdr_init(const struct mei_cl_cb *cb)
hdr_len += sizeof(*meta);
if (is_vtag)
- hdr_len += sizeof(*ext);
+ hdr_len += sizeof(struct mei_ext_hdr_vtag);
setup_hdr:
mei_hdr = kzalloc(hdr_len, GFP_KERNEL);
@@ -2250,7 +2252,7 @@ static void mei_cl_dma_free(struct mei_cl *cl)
}
/**
- * mei_cl_alloc_and_map - send client dma map request
+ * mei_cl_dma_alloc_and_map - send client dma map request
*
* @cl: host client
* @fp: pointer to file structure
@@ -2349,7 +2351,7 @@ out:
}
/**
- * mei_cl_unmap_and_free - send client dma unmap request
+ * mei_cl_dma_unmap - send client dma unmap request
*
* @cl: host client
* @fp: pointer to file structure
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index d0277c7fed10..99b5c1ecc444 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -853,7 +853,7 @@ out:
}
/**
- * mei_hbm_cl_flow_control_res - flow control response from me
+ * mei_hbm_cl_tx_flow_ctrl_creds_res - flow control response from me
*
* @dev: the device structure
* @fctrl: flow control response bus message
diff --git a/drivers/misc/mei/hdcp/Kconfig b/drivers/misc/mei/hdcp/Kconfig
index 95b2d6d37f10..54e1c9526909 100644
--- a/drivers/misc/mei/hdcp/Kconfig
+++ b/drivers/misc/mei/hdcp/Kconfig
@@ -1,4 +1,3 @@
-
# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2019, Intel Corporation. All rights reserved.
#
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index cda0829ac589..d3a6c0728645 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -1380,7 +1380,7 @@ static bool mei_me_fw_type_nm(const struct pci_dev *pdev)
.quirk_probe = mei_me_fw_type_nm
/**
- * mei_me_fw_sku_sps_4() - check for sps 4.0 sku
+ * mei_me_fw_type_sps_4() - check for sps 4.0 sku
*
* Read ME FW Status register to check for SPS Firmware.
* The SPS FW is only signaled in the PCI function 0.
@@ -1405,7 +1405,7 @@ static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev)
.quirk_probe = mei_me_fw_type_sps_4
/**
- * mei_me_fw_sku_sps() - check for sps sku
+ * mei_me_fw_type_sps() - check for sps sku
*
* Read ME FW Status register to check for SPS Firmware.
* The SPS FW is only signaled in pci function 0
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index b10606550613..dfd60c916da0 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -235,9 +235,8 @@ enum mei_ext_hdr_type {
struct mei_ext_hdr {
u8 type;
u8 length;
- u8 ext_payload[2];
- u8 hdr[];
-};
+ u8 data[];
+} __packed;
/**
* struct mei_ext_meta_hdr - extend header meta data
@@ -250,8 +249,21 @@ struct mei_ext_meta_hdr {
u8 count;
u8 size;
u8 reserved[2];
- struct mei_ext_hdr hdrs[];
-};
+ u8 hdrs[];
+} __packed;
+
+/**
+ * struct mei_ext_hdr_vtag - extend header for vtag
+ *
+ * @hdr: standard extend header
+ * @vtag: virtual tag
+ * @reserved: reserved
+ */
+struct mei_ext_hdr_vtag {
+ struct mei_ext_hdr hdr;
+ u8 vtag;
+ u8 reserved;
+} __packed;
/*
* Extended header iterator functions
@@ -266,7 +278,7 @@ struct mei_ext_meta_hdr {
*/
static inline struct mei_ext_hdr *mei_ext_begin(struct mei_ext_meta_hdr *meta)
{
- return meta->hdrs;
+ return (struct mei_ext_hdr *)meta->hdrs;
}
/**
@@ -284,7 +296,7 @@ static inline bool mei_ext_last(struct mei_ext_meta_hdr *meta,
}
/**
- *mei_ext_next - following extended header on the TLV list
+ * mei_ext_next - following extended header on the TLV list
*
* @ext: current extend header
*
@@ -295,7 +307,7 @@ static inline bool mei_ext_last(struct mei_ext_meta_hdr *meta,
*/
static inline struct mei_ext_hdr *mei_ext_next(struct mei_ext_hdr *ext)
{
- return (struct mei_ext_hdr *)(ext->hdr + (ext->length * 4));
+ return (struct mei_ext_hdr *)((u8 *)ext + (ext->length * 4));
}
/**
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index aab3ebfa9fc4..a67f4f2d33a9 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -123,13 +123,13 @@ static int mei_cl_irq_read_msg(struct mei_cl *cl,
if (mei_hdr->extended) {
struct mei_ext_hdr *ext;
- struct mei_ext_hdr *vtag = NULL;
+ struct mei_ext_hdr_vtag *vtag_hdr = NULL;
ext = mei_ext_begin(meta);
do {
switch (ext->type) {
case MEI_EXT_HDR_VTAG:
- vtag = ext;
+ vtag_hdr = (struct mei_ext_hdr_vtag *)ext;
break;
case MEI_EXT_HDR_NONE:
fallthrough;
@@ -141,20 +141,20 @@ static int mei_cl_irq_read_msg(struct mei_cl *cl,
ext = mei_ext_next(ext);
} while (!mei_ext_last(meta, ext));
- if (!vtag) {
+ if (!vtag_hdr) {
cl_dbg(dev, cl, "vtag not found in extended header.\n");
cb->status = -EPROTO;
goto discard;
}
- cl_dbg(dev, cl, "vtag: %d\n", vtag->ext_payload[0]);
- if (cb->vtag && cb->vtag != vtag->ext_payload[0]) {
+ cl_dbg(dev, cl, "vtag: %d\n", vtag_hdr->vtag);
+ if (cb->vtag && cb->vtag != vtag_hdr->vtag) {
cl_err(dev, cl, "mismatched tag: %d != %d\n",
- cb->vtag, vtag->ext_payload[0]);
+ cb->vtag, vtag_hdr->vtag);
cb->status = -EPROTO;
goto discard;
}
- cb->vtag = vtag->ext_payload[0];
+ cb->vtag = vtag_hdr->vtag;
}
if (!mei_cl_is_connected(cl)) {
@@ -331,7 +331,6 @@ int mei_irq_read_handler(struct mei_device *dev,
struct mei_ext_meta_hdr *meta_hdr = NULL;
struct mei_cl *cl;
int ret;
- u32 ext_meta_hdr_u32;
u32 hdr_size_left;
u32 hdr_size_ext;
int i;
@@ -367,14 +366,12 @@ int mei_irq_read_handler(struct mei_device *dev,
if (mei_hdr->extended) {
if (!dev->rd_msg_hdr[1]) {
- ext_meta_hdr_u32 = mei_read_hdr(dev);
- dev->rd_msg_hdr[1] = ext_meta_hdr_u32;
+ dev->rd_msg_hdr[1] = mei_read_hdr(dev);
dev->rd_msg_hdr_count++;
(*slots)--;
- dev_dbg(dev->dev, "extended header is %08x\n",
- ext_meta_hdr_u32);
+ dev_dbg(dev->dev, "extended header is %08x\n", dev->rd_msg_hdr[1]);
}
- meta_hdr = ((struct mei_ext_meta_hdr *)dev->rd_msg_hdr + 1);
+ meta_hdr = ((struct mei_ext_meta_hdr *)&dev->rd_msg_hdr[1]);
if (check_add_overflow((u32)sizeof(*meta_hdr),
mei_slots2data(meta_hdr->size),
&hdr_size_ext)) {
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 28937b6e7e0c..786f7c8f7f61 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -50,8 +50,6 @@ static int mei_open(struct inode *inode, struct file *file)
int err;
dev = container_of(inode->i_cdev, struct mei_device, cdev);
- if (!dev)
- return -ENODEV;
mutex_lock(&dev->device_lock);
@@ -1104,7 +1102,7 @@ static ssize_t dev_state_show(struct device *device,
static DEVICE_ATTR_RO(dev_state);
/**
- * dev_set_devstate: set to new device state and notify sysfs file.
+ * mei_set_devstate: set to new device state and notify sysfs file.
*
* @dev: mei_device
* @state: new device state
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index 4bf26ce61044..aec0483b8e72 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -156,7 +156,7 @@ end:
}
/**
- * mei_txe_remove - Device Shutdown Routine
+ * mei_txe_shutdown- Device Shutdown Routine
*
* @pdev: PCI device structure
*
diff --git a/drivers/misc/pvpanic/pvpanic-mmio.c b/drivers/misc/pvpanic/pvpanic-mmio.c
index 4c0841776087..be4016084979 100644
--- a/drivers/misc/pvpanic/pvpanic-mmio.c
+++ b/drivers/misc/pvpanic/pvpanic-mmio.c
@@ -93,7 +93,7 @@ static int pvpanic_mmio_probe(struct platform_device *pdev)
return -EINVAL;
}
- pi = kmalloc(sizeof(*pi), GFP_ATOMIC);
+ pi = devm_kmalloc(dev, sizeof(*pi), GFP_KERNEL);
if (!pi)
return -ENOMEM;
@@ -104,19 +104,7 @@ static int pvpanic_mmio_probe(struct platform_device *pdev)
pi->capability &= ioread8(base);
pi->events = pi->capability;
- dev_set_drvdata(dev, pi);
-
- return pvpanic_probe(pi);
-}
-
-static int pvpanic_mmio_remove(struct platform_device *pdev)
-{
- struct pvpanic_instance *pi = dev_get_drvdata(&pdev->dev);
-
- pvpanic_remove(pi);
- kfree(pi);
-
- return 0;
+ return devm_pvpanic_probe(dev, pi);
}
static const struct of_device_id pvpanic_mmio_match[] = {
@@ -139,6 +127,5 @@ static struct platform_driver pvpanic_mmio_driver = {
.dev_groups = pvpanic_mmio_dev_groups,
},
.probe = pvpanic_mmio_probe,
- .remove = pvpanic_mmio_remove,
};
module_platform_driver(pvpanic_mmio_driver);
diff --git a/drivers/misc/pvpanic/pvpanic-pci.c b/drivers/misc/pvpanic/pvpanic-pci.c
index 9ecc4e8559d5..a43c401017ae 100644
--- a/drivers/misc/pvpanic/pvpanic-pci.c
+++ b/drivers/misc/pvpanic/pvpanic-pci.c
@@ -73,20 +73,19 @@ ATTRIBUTE_GROUPS(pvpanic_pci_dev);
static int pvpanic_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- struct device *dev = &pdev->dev;
struct pvpanic_instance *pi;
void __iomem *base;
int ret;
- ret = pci_enable_device(pdev);
+ ret = pcim_enable_device(pdev);
if (ret < 0)
return ret;
- base = pci_iomap(pdev, 0, 0);
+ base = pcim_iomap(pdev, 0, 0);
if (!base)
return -ENOMEM;
- pi = kmalloc(sizeof(*pi), GFP_ATOMIC);
+ pi = devm_kmalloc(&pdev->dev, sizeof(*pi), GFP_KERNEL);
if (!pi)
return -ENOMEM;
@@ -97,26 +96,13 @@ static int pvpanic_pci_probe(struct pci_dev *pdev,
pi->capability &= ioread8(base);
pi->events = pi->capability;
- dev_set_drvdata(dev, pi);
-
- return pvpanic_probe(pi);
-}
-
-static void pvpanic_pci_remove(struct pci_dev *pdev)
-{
- struct pvpanic_instance *pi = dev_get_drvdata(&pdev->dev);
-
- pvpanic_remove(pi);
- iounmap(pi->base);
- kfree(pi);
- pci_disable_device(pdev);
+ return devm_pvpanic_probe(&pdev->dev, pi);
}
static struct pci_driver pvpanic_pci_driver = {
.name = "pvpanic-pci",
.id_table = pvpanic_pci_id_tbl,
.probe = pvpanic_pci_probe,
- .remove = pvpanic_pci_remove,
.driver = {
.dev_groups = pvpanic_pci_dev_groups,
},
diff --git a/drivers/misc/pvpanic/pvpanic.c b/drivers/misc/pvpanic/pvpanic.c
index 793ea0c01193..02b807c788c9 100644
--- a/drivers/misc/pvpanic/pvpanic.c
+++ b/drivers/misc/pvpanic/pvpanic.c
@@ -61,25 +61,10 @@ static struct notifier_block pvpanic_panic_nb = {
.priority = 1, /* let this called before broken drm_fb_helper */
};
-int pvpanic_probe(struct pvpanic_instance *pi)
-{
- if (!pi || !pi->base)
- return -EINVAL;
-
- spin_lock(&pvpanic_lock);
- list_add(&pi->list, &pvpanic_list);
- spin_unlock(&pvpanic_lock);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pvpanic_probe);
-
-void pvpanic_remove(struct pvpanic_instance *pi)
+static void pvpanic_remove(void *param)
{
struct pvpanic_instance *pi_cur, *pi_next;
-
- if (!pi)
- return;
+ struct pvpanic_instance *pi = param;
spin_lock(&pvpanic_lock);
list_for_each_entry_safe(pi_cur, pi_next, &pvpanic_list, list) {
@@ -90,7 +75,19 @@ void pvpanic_remove(struct pvpanic_instance *pi)
}
spin_unlock(&pvpanic_lock);
}
-EXPORT_SYMBOL_GPL(pvpanic_remove);
+
+int devm_pvpanic_probe(struct device *dev, struct pvpanic_instance *pi)
+{
+ if (!pi || !pi->base)
+ return -EINVAL;
+
+ spin_lock(&pvpanic_lock);
+ list_add(&pi->list, &pvpanic_list);
+ spin_unlock(&pvpanic_lock);
+
+ return devm_add_action_or_reset(dev, pvpanic_remove, pi);
+}
+EXPORT_SYMBOL_GPL(devm_pvpanic_probe);
static int pvpanic_init(void)
{
diff --git a/drivers/misc/pvpanic/pvpanic.h b/drivers/misc/pvpanic/pvpanic.h
index 1afccc2e9fec..493545951754 100644
--- a/drivers/misc/pvpanic/pvpanic.h
+++ b/drivers/misc/pvpanic/pvpanic.h
@@ -15,7 +15,6 @@ struct pvpanic_instance {
struct list_head list;
};
-int pvpanic_probe(struct pvpanic_instance *pi);
-void pvpanic_remove(struct pvpanic_instance *pi);
+int devm_pvpanic_probe(struct device *dev, struct pvpanic_instance *pi);
#endif /* PVPANIC_H_ */
diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c
index bae18ef03dcb..488eeb2811ae 100644
--- a/drivers/misc/uacce/uacce.c
+++ b/drivers/misc/uacce/uacce.c
@@ -387,15 +387,22 @@ static void uacce_release(struct device *dev)
static unsigned int uacce_enable_sva(struct device *parent, unsigned int flags)
{
+ int ret;
+
if (!(flags & UACCE_DEV_SVA))
return flags;
flags &= ~UACCE_DEV_SVA;
- if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_IOPF))
+ ret = iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_IOPF);
+ if (ret) {
+ dev_err(parent, "failed to enable IOPF feature! ret = %pe\n", ERR_PTR(ret));
return flags;
+ }
- if (iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA)) {
+ ret = iommu_dev_enable_feature(parent, IOMMU_DEV_FEAT_SVA);
+ if (ret) {
+ dev_err(parent, "failed to enable SVA feature! ret = %pe\n", ERR_PTR(ret));
iommu_dev_disable_feature(parent, IOMMU_DEV_FEAT_IOPF);
return flags;
}
diff --git a/drivers/misc/vmw_vmci/vmci_context.c b/drivers/misc/vmw_vmci/vmci_context.c
index 26ff49fdf0f7..c0b5e339d5a1 100644
--- a/drivers/misc/vmw_vmci/vmci_context.c
+++ b/drivers/misc/vmw_vmci/vmci_context.c
@@ -107,7 +107,7 @@ struct vmci_ctx *vmci_ctx_create(u32 cid, u32 priv_flags,
context = kzalloc(sizeof(*context), GFP_KERNEL);
if (!context) {
pr_warn("Failed to allocate memory for VMCI context\n");
- error = -EINVAL;
+ error = -ENOMEM;
goto err_out;
}
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
index 23c8448a9c3b..d6e3c650bd11 100644
--- a/drivers/misc/xilinx_sdfec.c
+++ b/drivers/misc/xilinx_sdfec.c
@@ -1013,9 +1013,6 @@ static __poll_t xsdfec_poll(struct file *file, poll_table *wait)
xsdfec = container_of(file->private_data, struct xsdfec_dev, miscdev);
- if (!xsdfec)
- return EPOLLNVAL | EPOLLHUP;
-
poll_wait(file, &xsdfec->waitq, wait);
/* XSDFEC ISR detected an error */
diff --git a/drivers/net/ethernet/sun/ldmvsw.c b/drivers/net/ethernet/sun/ldmvsw.c
index 01ea0d6f8819..50bd4e3b0af9 100644
--- a/drivers/net/ethernet/sun/ldmvsw.c
+++ b/drivers/net/ethernet/sun/ldmvsw.c
@@ -404,7 +404,7 @@ err_out_free_dev:
return err;
}
-static int vsw_port_remove(struct vio_dev *vdev)
+static void vsw_port_remove(struct vio_dev *vdev)
{
struct vnet_port *port = dev_get_drvdata(&vdev->dev);
unsigned long flags;
@@ -430,8 +430,6 @@ static int vsw_port_remove(struct vio_dev *vdev)
free_netdev(port->dev);
}
-
- return 0;
}
static void vsw_cleanup(void)
diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c
index 96b883f965f6..58ee89223951 100644
--- a/drivers/net/ethernet/sun/sunvnet.c
+++ b/drivers/net/ethernet/sun/sunvnet.c
@@ -510,7 +510,7 @@ err_out_put_mdesc:
return err;
}
-static int vnet_port_remove(struct vio_dev *vdev)
+static void vnet_port_remove(struct vio_dev *vdev)
{
struct vnet_port *port = dev_get_drvdata(&vdev->dev);
@@ -533,7 +533,6 @@ static int vnet_port_remove(struct vio_dev *vdev)
kfree(port);
}
- return 0;
}
static const struct vio_device_id vnet_port_match[] = {
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 62d363a399d3..b3bc30a04ed7 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -180,6 +180,7 @@ static const char * const nvmem_type_str[] = {
[NVMEM_TYPE_EEPROM] = "EEPROM",
[NVMEM_TYPE_OTP] = "OTP",
[NVMEM_TYPE_BATTERY_BACKED] = "Battery backed",
+ [NVMEM_TYPE_FRAM] = "FRAM",
};
#ifdef CONFIG_DEBUG_LOCK_ALLOC
@@ -359,6 +360,9 @@ static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
if (!config->base_dev)
return -EINVAL;
+ if (config->type == NVMEM_TYPE_FRAM)
+ bin_attr_nvmem_eeprom_compat.attr.name = "fram";
+
nvmem->eeprom = bin_attr_nvmem_eeprom_compat;
nvmem->eeprom.attr.mode = nvmem_bin_attr_get_umode(nvmem);
nvmem->eeprom.size = nvmem->size;
@@ -686,15 +690,17 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
continue;
if (len < 2 * sizeof(u32)) {
dev_err(dev, "nvmem: invalid reg on %pOF\n", child);
+ of_node_put(child);
return -EINVAL;
}
cell = kzalloc(sizeof(*cell), GFP_KERNEL);
- if (!cell)
+ if (!cell) {
+ of_node_put(child);
return -ENOMEM;
+ }
cell->nvmem = nvmem;
- cell->np = of_node_get(child);
cell->offset = be32_to_cpup(addr++);
cell->bytes = be32_to_cpup(addr);
cell->name = kasprintf(GFP_KERNEL, "%pOFn", child);
@@ -715,11 +721,12 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
cell->name, nvmem->stride);
/* Cells already added will be freed later. */
kfree_const(cell->name);
- of_node_put(cell->np);
kfree(cell);
+ of_node_put(child);
return -EINVAL;
}
+ cell->np = of_node_get(child);
nvmem_cell_add(cell);
}
@@ -1608,9 +1615,9 @@ int nvmem_cell_read_u64(struct device *dev, const char *cell_id, u64 *val)
}
EXPORT_SYMBOL_GPL(nvmem_cell_read_u64);
-static void *nvmem_cell_read_variable_common(struct device *dev,
- const char *cell_id,
- size_t max_len, size_t *len)
+static const void *nvmem_cell_read_variable_common(struct device *dev,
+ const char *cell_id,
+ size_t max_len, size_t *len)
{
struct nvmem_cell *cell;
int nbits;
@@ -1654,7 +1661,7 @@ int nvmem_cell_read_variable_le_u32(struct device *dev, const char *cell_id,
u32 *val)
{
size_t len;
- u8 *buf;
+ const u8 *buf;
int i;
buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
@@ -1685,7 +1692,7 @@ int nvmem_cell_read_variable_le_u64(struct device *dev, const char *cell_id,
u64 *val)
{
size_t len;
- u8 *buf;
+ const u8 *buf;
int i;
buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index d6d3f24685a8..81fbad5e939d 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -122,6 +122,7 @@ static const struct qfprom_soc_compatible_data sc7280_qfprom = {
.keepout = sc7280_qfprom_keepout,
.nkeepout = ARRAY_SIZE(sc7280_qfprom_keepout)
};
+
/**
* qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
* @priv: Our driver data.
@@ -195,9 +196,9 @@ static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
}
/*
- * Hardware requires 1.8V min for fuse blowing; this may be
- * a rail shared do don't specify a max--regulator constraints
- * will handle.
+ * Hardware requires a minimum voltage for fuse blowing.
+ * This may be a shared rail so don't specify a maximum.
+ * Regulator constraints will cap to the actual maximum.
*/
ret = regulator_set_voltage(priv->vcc, qfprom_blow_uV, INT_MAX);
if (ret) {
@@ -399,7 +400,7 @@ static int qfprom_probe(struct platform_device *pdev)
if (major_version == 7 && minor_version == 8)
priv->soc_data = &qfprom_7_8_data;
- if (major_version == 7 && minor_version == 15)
+ else if (major_version == 7 && minor_version == 15)
priv->soc_data = &qfprom_7_15_data;
priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
diff --git a/drivers/nvmem/sprd-efuse.c b/drivers/nvmem/sprd-efuse.c
index 59523245db8a..4f1fcbfec394 100644
--- a/drivers/nvmem/sprd-efuse.c
+++ b/drivers/nvmem/sprd-efuse.c
@@ -234,7 +234,7 @@ static int sprd_efuse_raw_prog(struct sprd_efuse *efuse, u32 blk, bool doub,
status = readl(efuse->base + SPRD_EFUSE_ERR_FLAG);
if (status) {
dev_err(efuse->dev,
- "write error status %d of block %d\n", ret, blk);
+ "write error status %u of block %d\n", status, blk);
writel(SPRD_EFUSE_ERR_CLR_MASK,
efuse->base + SPRD_EFUSE_ERR_CLR);
diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index e26ef1bbf198..275b9155e473 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -142,6 +142,7 @@ static int sunxi_sid_probe(struct platform_device *pdev)
nvmem_cfg->dev = dev;
nvmem_cfg->name = "sunxi-sid";
+ nvmem_cfg->type = NVMEM_TYPE_OTP;
nvmem_cfg->read_only = true;
nvmem_cfg->size = cfg->size;
nvmem_cfg->word_size = 1;
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index 7e6d713fa5ac..5d1b9aacb130 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c
@@ -8,8 +8,8 @@
#include <linux/module.h>
#include <linux/parport.h>
-#include <linux/ctype.h>
#include <linux/string.h>
+#include <linux/string_helpers.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
@@ -74,11 +74,7 @@ static void parse_data(struct parport *port, int device, char *str)
u = sep + strlen (sep) - 1;
while (u >= p && *u == ' ')
*u-- = '\0';
- u = p;
- while (*u) {
- *u = toupper(*u);
- u++;
- }
+ string_upper(p, p);
if (!strcmp(p, "MFG") || !strcmp(p, "MANUFACTURER")) {
kfree(info->mfr);
info->mfr = kstrdup(sep, GFP_KERNEL);
@@ -90,8 +86,7 @@ static void parse_data(struct parport *port, int device, char *str)
kfree(info->class_name);
info->class_name = kstrdup(sep, GFP_KERNEL);
- for (u = sep; *u; u++)
- *u = toupper(*u);
+ string_upper(sep, sep);
for (i = 0; classes[i].token; i++) {
if (!strcmp(classes[i].token, sep)) {
info->class = i;
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 54c1f2f0985f..7dd35f1b9cc5 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -61,6 +61,15 @@ config USB_LGM_PHY
interface to interact with USB GEN-II and USB 3.x PHY that is part
of the Intel network SOC.
+config PHY_CAN_TRANSCEIVER
+ tristate "CAN transceiver PHY"
+ select GENERIC_PHY
+ help
+ This option enables support for CAN transceivers as a PHY. This
+ driver provides function for putting the transceivers in various
+ functional modes using gpios and sets the attribute max link
+ rate, for CAN drivers.
+
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/amlogic/Kconfig"
source "drivers/phy/broadcom/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index adac1b1a39d1..01e9efffc726 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
+obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
index eb10ffa13a62..b1adaecc26f8 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -215,10 +215,8 @@ static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
return err;
usb3->dmp = devm_ioremap_resource(dev, &res);
- if (IS_ERR(usb3->dmp)) {
- dev_err(dev, "Failed to map DMP regs\n");
+ if (IS_ERR(usb3->dmp))
return PTR_ERR(usb3->dmp);
- }
usb3->phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(usb3->phy)) {
diff --git a/drivers/phy/marvell/phy-mmp3-hsic.c b/drivers/phy/marvell/phy-mmp3-hsic.c
index 47c1e8894939..7cccf01848d8 100644
--- a/drivers/phy/marvell/phy-mmp3-hsic.c
+++ b/drivers/phy/marvell/phy-mmp3-hsic.c
@@ -47,10 +47,8 @@ static int mmp3_hsic_phy_probe(struct platform_device *pdev)
resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, resource);
- if (IS_ERR(base)) {
- dev_err(dev, "failed to remap PHY regs\n");
+ if (IS_ERR(base))
return PTR_ERR(base);
- }
phy = devm_phy_create(dev, NULL, &mmp3_hsic_phy_ops);
if (IS_ERR(phy)) {
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi.c b/drivers/phy/mediatek/phy-mtk-hdmi.c
index 8313bd517e4c..8ad8f717ef43 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi.c
@@ -119,9 +119,7 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hdmi_phy->regs = devm_ioremap_resource(dev, mem);
if (IS_ERR(hdmi_phy->regs)) {
- ret = PTR_ERR(hdmi_phy->regs);
- dev_err(dev, "Failed to get memory resource: %d\n", ret);
- return ret;
+ return PTR_ERR(hdmi_phy->regs);
}
ref_clk = devm_clk_get(dev, "pll_ref");
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index c51114d8e437..01cf31633019 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -151,9 +151,7 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mipi_tx->regs = devm_ioremap_resource(dev, mem);
if (IS_ERR(mipi_tx->regs)) {
- ret = PTR_ERR(mipi_tx->regs);
- dev_err(dev, "Failed to get memory resource: %d\n", ret);
- return ret;
+ return PTR_ERR(mipi_tx->regs);
}
ref_clk = devm_clk_get(dev, NULL);
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
new file mode 100644
index 000000000000..c2cb93b4df71
--- /dev/null
+++ b/drivers/phy/phy-can-transceiver.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-can-transceiver.c - phy driver for CAN transceivers
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com
+ *
+ */
+#include<linux/phy/phy.h>
+#include<linux/platform_device.h>
+#include<linux/module.h>
+#include<linux/gpio.h>
+#include<linux/gpio/consumer.h>
+
+struct can_transceiver_data {
+ u32 flags;
+#define CAN_TRANSCEIVER_STB_PRESENT BIT(0)
+#define CAN_TRANSCEIVER_EN_PRESENT BIT(1)
+};
+
+struct can_transceiver_phy {
+ struct phy *generic_phy;
+ struct gpio_desc *standby_gpio;
+ struct gpio_desc *enable_gpio;
+};
+
+/* Power on function */
+static int can_transceiver_phy_power_on(struct phy *phy)
+{
+ struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
+
+ if (can_transceiver_phy->standby_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
+ if (can_transceiver_phy->enable_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 1);
+
+ return 0;
+}
+
+/* Power off function */
+static int can_transceiver_phy_power_off(struct phy *phy)
+{
+ struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
+
+ if (can_transceiver_phy->standby_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
+ if (can_transceiver_phy->enable_gpio)
+ gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
+
+ return 0;
+}
+
+static const struct phy_ops can_transceiver_phy_ops = {
+ .power_on = can_transceiver_phy_power_on,
+ .power_off = can_transceiver_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct can_transceiver_data tcan1042_drvdata = {
+ .flags = CAN_TRANSCEIVER_STB_PRESENT,
+};
+
+static const struct can_transceiver_data tcan1043_drvdata = {
+ .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT,
+};
+
+static const struct of_device_id can_transceiver_phy_ids[] = {
+ {
+ .compatible = "ti,tcan1042",
+ .data = &tcan1042_drvdata
+ },
+ {
+ .compatible = "ti,tcan1043",
+ .data = &tcan1043_drvdata
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
+
+static int can_transceiver_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct can_transceiver_phy *can_transceiver_phy;
+ const struct can_transceiver_data *drvdata;
+ const struct of_device_id *match;
+ struct phy *phy;
+ struct gpio_desc *standby_gpio;
+ struct gpio_desc *enable_gpio;
+ u32 max_bitrate = 0;
+
+ can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL);
+ if (!can_transceiver_phy)
+ return -ENOMEM;
+
+ match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
+ drvdata = match->data;
+
+ phy = devm_phy_create(dev, dev->of_node,
+ &can_transceiver_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create can transceiver phy\n");
+ return PTR_ERR(phy);
+ }
+
+ device_property_read_u32(dev, "max-bitrate", &max_bitrate);
+ if (!max_bitrate)
+ dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
+ phy->attrs.max_link_rate = max_bitrate;
+
+ can_transceiver_phy->generic_phy = phy;
+
+ if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
+ standby_gpio = devm_gpiod_get(dev, "standby", GPIOD_OUT_HIGH);
+ if (IS_ERR(standby_gpio))
+ return PTR_ERR(standby_gpio);
+ can_transceiver_phy->standby_gpio = standby_gpio;
+ }
+
+ if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
+ enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(enable_gpio))
+ return PTR_ERR(enable_gpio);
+ can_transceiver_phy->enable_gpio = enable_gpio;
+ }
+
+ phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver can_transceiver_phy_driver = {
+ .probe = can_transceiver_phy_probe,
+ .driver = {
+ .name = "can-transceiver-phy",
+ .of_match_table = can_transceiver_phy_ids,
+ },
+};
+
+module_platform_driver(can_transceiver_phy_driver);
+
+MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>");
+MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>");
+MODULE_DESCRIPTION("CAN TRANSCEIVER PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index 77fe65367ce5..288c9c67aa74 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -15,7 +15,7 @@
/*
* Minimum D-PHY timings based on MIPI D-PHY specification. Derived
* from the valid ranges specified in Section 6.9, Table 14, Page 41
- * of the D-PHY specification (v2.1).
+ * of the D-PHY specification (v1.2).
*/
int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
unsigned int bpp,
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index ccb575b13777..91e28d6ce450 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -697,16 +697,18 @@ struct phy *phy_get(struct device *dev, const char *string)
struct phy *phy;
struct device_link *link;
- if (string == NULL) {
- dev_WARN(dev, "missing string\n");
- return ERR_PTR(-EINVAL);
- }
-
if (dev->of_node) {
- index = of_property_match_string(dev->of_node, "phy-names",
- string);
+ if (string)
+ index = of_property_match_string(dev->of_node, "phy-names",
+ string);
+ else
+ index = 0;
phy = _of_phy_get(dev->of_node, index);
} else {
+ if (string == NULL) {
+ dev_WARN(dev, "missing string\n");
+ return ERR_PTR(-EINVAL);
+ }
phy = phy_find(dev, string);
}
if (IS_ERR(phy))
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index f4cd590fbde7..d0f4546648f0 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -961,7 +961,8 @@ static void xgene_phy_sata_cfg_lanes(struct xgene_phy_ctx *ctx)
serdes_wr(ctx, lane, RXTX_REG1, val);
/* Latch VTT value based on the termination to ground and
- enable TX FIFO */
+ * enable TX FIFO
+ */
serdes_rd(ctx, lane, RXTX_REG2, &val);
val = RXTX_REG2_VTT_ENA_SET(val, 0x1);
val = RXTX_REG2_VTT_SEL_SET(val, 0x1);
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 7877f70cf86f..cfe359488f5c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -35,6 +35,7 @@
#define PLL_READY_GATE_EN BIT(3)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
+#define PHYSTATUS_4_20 BIT(7)
/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
#define PCS_READY BIT(0)
@@ -143,6 +144,13 @@ static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_READY_STATUS] = 0x168,
};
+static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+};
+
static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_COM_SW_RESET] = 0x400,
[QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
@@ -614,6 +622,113 @@ static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_POWER_STATE_CONFIG2, 0x08),
};
+static const struct qmp_phy_init_tbl ipq6018_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE1_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SSC_STEP_SIZE2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0xd4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x29),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x53),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0xaa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x61),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+};
+
+static const struct qmp_phy_init_tbl ipq6018_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_EQ_CONFIG5, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG2, 0x0d),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_PRE, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_PRESET_P10_POST, 0x58),
+};
+
static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -2110,6 +2225,101 @@ static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
};
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x46),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_CFG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x50),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MISC1, 0x88),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_MODE, 0x17),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_DC_LEVEL_CTRL, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x56),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x22),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_2, 0xf6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_LANE_MODE_3, 0x13),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_VMODE_CTRL1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_TX_PI_QEC_CTRL, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_FO_GAIN_RATE2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_UCDR_PI_CONTROLS, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_3, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_DAC_ENABLE2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_VGA_CAL_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x27),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2, 0x5a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B0, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B1, 0xf9),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B3, 0xce),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE2_B4, 0x62),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B0, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B1, 0x7d),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B3, 0xcf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_RX_MODE_RATE3_B4, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_PHPRE_CTRL, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_20_RX_MARG_COARSE_CTRL2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_RX_SIGDET_LVL, 0x77),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_EQ_CONFIG5, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_EQ_CONFIG1, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
+};
+
static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
@@ -2411,6 +2621,8 @@ struct qmp_phy_cfg {
unsigned int start_ctrl;
unsigned int pwrdn_ctrl;
unsigned int mask_com_pcs_ready;
+ /* bit offset of PHYSTATUS in QPHY_PCS_STATUS register */
+ unsigned int phy_status;
/* true, if PHY has a separate PHY_COM control block */
bool has_phy_com_ctrl;
@@ -2624,6 +2836,7 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
};
static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
@@ -2649,6 +2862,7 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
.start_ctrl = PCS_START | PLL_READY_GATE_EN,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.mask_com_pcs_ready = PCS_READY,
+ .phy_status = PHYSTATUS,
.has_phy_com_ctrl = true,
.has_lane_rst = true,
@@ -2678,6 +2892,7 @@ static const struct qmp_phy_cfg msm8996_ufs_cfg = {
.start_ctrl = SERDES_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.no_pcs_sw_reset = true,
};
@@ -2704,6 +2919,7 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
};
static const char * const ipq8074_pciephy_clk_l[] = {
@@ -2736,6 +2952,37 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
+static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq6018_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq6018_pcie_serdes_tbl),
+ .tx_tbl = ipq6018_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq6018_pcie_tx_tbl),
+ .rx_tbl = ipq6018_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
+ .pcs_tbl = ipq6018_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = ipq_pciephy_gen3_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.has_phy_com_ctrl = false,
.has_lane_rst = false,
@@ -2768,6 +3015,7 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
.start_ctrl = PCS_START | SERDES_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = 995, /* us */
@@ -2796,6 +3044,7 @@ static const struct qmp_phy_cfg sdm845_qhp_pciephy_cfg = {
.start_ctrl = PCS_START | SERDES_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = 995, /* us */
@@ -2834,6 +3083,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
.start_ctrl = PCS_START | SERDES_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = 995, /* us */
@@ -2872,6 +3122,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
.start_ctrl = PCS_START | SERDES_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
.is_dual_lane_phy = true,
.has_pwrdn_delay = true,
@@ -2901,6 +3152,7 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -2932,6 +3184,7 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3003,6 +3256,7 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3029,6 +3283,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.start_ctrl = SERDES_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.is_dual_lane_phy = true,
.no_pcs_sw_reset = true,
@@ -3056,6 +3311,7 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .phy_status = PHYSTATUS,
};
static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
@@ -3080,6 +3336,7 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.is_dual_lane_phy = true,
};
@@ -3104,6 +3361,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
.start_ctrl = SERDES_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.is_dual_lane_phy = true,
};
@@ -3130,6 +3388,8 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3161,6 +3421,7 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3189,6 +3450,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3220,6 +3482,7 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3288,12 +3551,45 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
.pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
};
+static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 2,
+
+ .serdes_tbl = sdx55_qmp_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_serdes_tbl),
+ .tx_tbl = sdx55_qmp_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_tx_tbl),
+ .rx_tbl = sdx55_qmp_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_rx_tbl),
+ .pcs_tbl = sdx55_qmp_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_tbl),
+ .pcs_misc_tbl = sdx55_qmp_pcie_pcs_misc_tbl,
+ .pcs_misc_tbl_num = ARRAY_SIZE(sdx55_qmp_pcie_pcs_misc_tbl),
+ .clk_list = sdm845_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l),
+ .reset_list = sdm845_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm8250_pcie_regs_layout,
+
+ .start_ctrl = PCS_START | SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS_4_20,
+
+ .is_dual_lane_phy = true,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
.type = PHY_TYPE_UFS,
.nlanes = 2,
@@ -3314,6 +3610,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
.start_ctrl = SERDES_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.is_dual_lane_phy = true,
};
@@ -3340,6 +3637,7 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3371,6 +3669,7 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -3993,10 +4292,8 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
}
ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
- if (ret) {
- dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+ if (ret)
goto err_rst;
- }
if (cfg->has_phy_dp_com_ctrl) {
qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
@@ -4238,7 +4535,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)
ready = PCS_READY;
} else {
status = pcs + cfg->regs[QPHY_PCS_STATUS];
- mask = PHYSTATUS;
+ mask = cfg->phy_status;
ready = 0;
}
@@ -4430,10 +4727,8 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
}
ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
- if (ret) {
- dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+ if (ret)
return ret;
- }
ret = clk_prepare_enable(qphy->pipe_clk);
if (ret) {
@@ -4928,6 +5223,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
.compatible = "qcom,ipq8074-qmp-pcie-phy",
.data = &ipq8074_pciephy_cfg,
}, {
+ .compatible = "qcom,ipq6018-qmp-pcie-phy",
+ .data = &ipq6018_pciephy_cfg,
+ }, {
.compatible = "qcom,sc7180-qmp-usb3-phy",
.data = &sc7180_usb3phy_cfg,
}, {
@@ -4991,6 +5289,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
.compatible = "qcom,sm8250-qmp-modem-pcie-phy",
.data = &sm8250_qmp_gen3x2_pciephy_cfg,
}, {
+ .compatible = "qcom,sdx55-qmp-pcie-phy",
+ .data = &sdx55_qmp_pciephy_cfg,
+ }, {
.compatible = "qcom,sdx55-qmp-usb3-uni-phy",
.data = &sdx55_usb3_uniphy_cfg,
}, {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 67bd2dd0d8c5..6592b58b13f6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -6,6 +6,138 @@
#ifndef QCOM_PHY_QMP_H_
#define QCOM_PHY_QMP_H_
+/* QMP V2 PHY for PCIE gen3 ports - QSERDES PLL registers */
+
+#define QSERDES_PLL_BG_TIMER 0x00c
+#define QSERDES_PLL_SSC_PER1 0x01c
+#define QSERDES_PLL_SSC_PER2 0x020
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE0 0x024
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE0 0x028
+#define QSERDES_PLL_SSC_STEP_SIZE1_MODE1 0x02c
+#define QSERDES_PLL_SSC_STEP_SIZE2_MODE1 0x030
+#define QSERDES_PLL_BIAS_EN_CLKBUFLR_EN 0x03c
+#define QSERDES_PLL_CLK_ENABLE1 0x040
+#define QSERDES_PLL_SYS_CLK_CTRL 0x044
+#define QSERDES_PLL_SYSCLK_BUF_ENABLE 0x048
+#define QSERDES_PLL_PLL_IVCO 0x050
+#define QSERDES_PLL_LOCK_CMP1_MODE0 0x054
+#define QSERDES_PLL_LOCK_CMP2_MODE0 0x058
+#define QSERDES_PLL_LOCK_CMP1_MODE1 0x060
+#define QSERDES_PLL_LOCK_CMP2_MODE1 0x064
+#define QSERDES_PLL_BG_TRIM 0x074
+#define QSERDES_PLL_CLK_EP_DIV_MODE0 0x078
+#define QSERDES_PLL_CLK_EP_DIV_MODE1 0x07c
+#define QSERDES_PLL_CP_CTRL_MODE0 0x080
+#define QSERDES_PLL_CP_CTRL_MODE1 0x084
+#define QSERDES_PLL_PLL_RCTRL_MODE0 0x088
+#define QSERDES_PLL_PLL_RCTRL_MODE1 0x08C
+#define QSERDES_PLL_PLL_CCTRL_MODE0 0x090
+#define QSERDES_PLL_PLL_CCTRL_MODE1 0x094
+#define QSERDES_PLL_BIAS_EN_CTRL_BY_PSM 0x0a4
+#define QSERDES_PLL_SYSCLK_EN_SEL 0x0a8
+#define QSERDES_PLL_RESETSM_CNTRL 0x0b0
+#define QSERDES_PLL_LOCK_CMP_EN 0x0c4
+#define QSERDES_PLL_DEC_START_MODE0 0x0cc
+#define QSERDES_PLL_DEC_START_MODE1 0x0d0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE0 0x0d8
+#define QSERDES_PLL_DIV_FRAC_START2_MODE0 0x0dc
+#define QSERDES_PLL_DIV_FRAC_START3_MODE0 0x0e0
+#define QSERDES_PLL_DIV_FRAC_START1_MODE1 0x0e4
+#define QSERDES_PLL_DIV_FRAC_START2_MODE1 0x0e8
+#define QSERDES_PLL_DIV_FRAC_START3_MODE1 0x0eC
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE0 0x100
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE0 0x104
+#define QSERDES_PLL_INTEGLOOP_GAIN0_MODE1 0x108
+#define QSERDES_PLL_INTEGLOOP_GAIN1_MODE1 0x10c
+#define QSERDES_PLL_VCO_TUNE_MAP 0x120
+#define QSERDES_PLL_VCO_TUNE1_MODE0 0x124
+#define QSERDES_PLL_VCO_TUNE2_MODE0 0x128
+#define QSERDES_PLL_VCO_TUNE1_MODE1 0x12c
+#define QSERDES_PLL_VCO_TUNE2_MODE1 0x130
+#define QSERDES_PLL_VCO_TUNE_TIMER1 0x13c
+#define QSERDES_PLL_VCO_TUNE_TIMER2 0x140
+#define QSERDES_PLL_CLK_SELECT 0x16c
+#define QSERDES_PLL_HSCLK_SEL 0x170
+#define QSERDES_PLL_CORECLK_DIV 0x17c
+#define QSERDES_PLL_CORE_CLK_EN 0x184
+#define QSERDES_PLL_CMN_CONFIG 0x18c
+#define QSERDES_PLL_SVS_MODE_CLK_SEL 0x194
+#define QSERDES_PLL_CORECLK_DIV_MODE1 0x1b4
+
+/* QMP V2 PHY for PCIE gen3 ports - QSERDES TX registers */
+
+#define QSERDES_TX0_RES_CODE_LANE_OFFSET_TX 0x03c
+#define QSERDES_TX0_HIGHZ_DRVR_EN 0x058
+#define QSERDES_TX0_LANE_MODE_1 0x084
+#define QSERDES_TX0_RCV_DETECT_LVL_2 0x09c
+
+/* QMP V2 PHY for PCIE gen3 ports - QSERDES RX registers */
+
+#define QSERDES_RX0_UCDR_FO_GAIN 0x008
+#define QSERDES_RX0_UCDR_SO_GAIN 0x014
+#define QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE 0x034
+#define QSERDES_RX0_UCDR_PI_CONTROLS 0x044
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2 0x0ec
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3 0x0f0
+#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4 0x0f4
+#define QSERDES_RX0_RX_IDAC_TSETTLE_LOW 0x0f8
+#define QSERDES_RX0_RX_IDAC_TSETTLE_HIGH 0x0fc
+#define QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
+#define QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2 0x114
+#define QSERDES_RX0_SIGDET_ENABLES 0x118
+#define QSERDES_RX0_SIGDET_CNTRL 0x11c
+#define QSERDES_RX0_SIGDET_DEGLITCH_CNTRL 0x124
+#define QSERDES_RX0_RX_MODE_00_LOW 0x170
+#define QSERDES_RX0_RX_MODE_00_HIGH 0x174
+#define QSERDES_RX0_RX_MODE_00_HIGH2 0x178
+#define QSERDES_RX0_RX_MODE_00_HIGH3 0x17c
+#define QSERDES_RX0_RX_MODE_00_HIGH4 0x180
+#define QSERDES_RX0_RX_MODE_01_LOW 0x184
+#define QSERDES_RX0_RX_MODE_01_HIGH 0x188
+#define QSERDES_RX0_RX_MODE_01_HIGH2 0x18c
+#define QSERDES_RX0_RX_MODE_01_HIGH3 0x190
+#define QSERDES_RX0_RX_MODE_01_HIGH4 0x194
+#define QSERDES_RX0_RX_MODE_10_LOW 0x198
+#define QSERDES_RX0_RX_MODE_10_HIGH 0x19c
+#define QSERDES_RX0_RX_MODE_10_HIGH2 0x1a0
+#define QSERDES_RX0_RX_MODE_10_HIGH3 0x1a4
+#define QSERDES_RX0_RX_MODE_10_HIGH4 0x1a8
+#define QSERDES_RX0_DFE_EN_TIMER 0x1b4
+
+/* QMP V2 PHY for PCIE gen3 ports - PCS registers */
+
+#define PCS_COM_FLL_CNTRL1 0x098
+#define PCS_COM_FLL_CNTRL2 0x09c
+#define PCS_COM_FLL_CNT_VAL_L 0x0a0
+#define PCS_COM_FLL_CNT_VAL_H_TOL 0x0a4
+#define PCS_COM_FLL_MAN_CODE 0x0a8
+#define PCS_COM_REFGEN_REQ_CONFIG1 0x0dc
+#define PCS_COM_G12S1_TXDEEMPH_M3P5DB 0x16c
+#define PCS_COM_RX_SIGDET_LVL 0x188
+#define PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L 0x1a4
+#define PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H 0x1a8
+#define PCS_COM_RX_DCC_CAL_CONFIG 0x1d8
+#define PCS_COM_EQ_CONFIG5 0x1ec
+
+/* QMP V2 PHY for PCIE gen3 ports - PCS Misc registers */
+
+#define PCS_PCIE_POWER_STATE_CONFIG2 0x40c
+#define PCS_PCIE_POWER_STATE_CONFIG4 0x414
+#define PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x41c
+#define PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L 0x440
+#define PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H 0x444
+#define PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L 0x448
+#define PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H 0x44c
+#define PCS_PCIE_OSC_DTCT_CONFIG2 0x45c
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG2 0x478
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG4 0x480
+#define PCS_PCIE_OSC_DTCT_MODE2_CONFIG5 0x484
+#define PCS_PCIE_OSC_DTCT_ACTIONS 0x490
+#define PCS_PCIE_EQ_CONFIG1 0x4a0
+#define PCS_PCIE_EQ_CONFIG2 0x4a4
+#define PCS_PCIE_PRESET_P10_PRE 0x4bc
+#define PCS_PCIE_PRESET_P10_POST 0x4e0
+
/* Only for QMP V2 PHY - QSERDES COM registers */
#define QSERDES_COM_BG_TIMER 0x00c
#define QSERDES_COM_SSC_EN_CENTER 0x010
@@ -420,6 +552,7 @@
#define QSERDES_V4_COM_SYSCLK_EN_SEL 0x094
#define QSERDES_V4_COM_RESETSM_CNTRL 0x09c
#define QSERDES_V4_COM_LOCK_CMP_EN 0x0a4
+#define QSERDES_V4_COM_LOCK_CMP_CFG 0x0a8
#define QSERDES_V4_COM_LOCK_CMP1_MODE0 0x0ac
#define QSERDES_V4_COM_LOCK_CMP2_MODE0 0x0b0
#define QSERDES_V4_COM_LOCK_CMP1_MODE1 0x0b4
@@ -434,6 +567,8 @@
#define QSERDES_V4_COM_DIV_FRAC_START3_MODE1 0x0e0
#define QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0 0x0ec
#define QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0 0x0f0
+#define QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE1 0x0f4
+#define QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE1 0x0f8
#define QSERDES_V4_COM_VCO_TUNE_CTRL 0x108
#define QSERDES_V4_COM_VCO_TUNE_MAP 0x10c
#define QSERDES_V4_COM_VCO_TUNE1_MODE0 0x110
@@ -451,11 +586,15 @@
#define QSERDES_V4_COM_C_READY_STATUS 0x178
#define QSERDES_V4_COM_CMN_CONFIG 0x17c
#define QSERDES_V4_COM_SVS_MODE_CLK_SEL 0x184
+#define QSERDES_V4_COM_CMN_MISC1 0x19c
+#define QSERDES_V4_COM_INTERNAL_DIG_CORECLK_DIV 0x1a0
+#define QSERDES_V4_COM_CMN_MODE 0x1a4
+#define QSERDES_V4_COM_VCO_DC_LEVEL_CTRL 0x1a8
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x1b4
-#define QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL 0x1bc
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1b8
+#define QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL 0x1bc
/* Only for QMP V4 PHY - TX registers */
#define QSERDES_V4_TX_CLKBUF_ENABLE 0x08
@@ -485,6 +624,13 @@
#define QSERDES_V4_TX_VMODE_CTRL1 0xe8
#define QSERDES_V4_TX_PI_QEC_CTRL 0x104
+/* Only for QMP V4_20 PHY - TX registers */
+#define QSERDES_V4_20_TX_LANE_MODE_1 0x88
+#define QSERDES_V4_20_TX_LANE_MODE_2 0x8c
+#define QSERDES_V4_20_TX_LANE_MODE_3 0x90
+#define QSERDES_V4_20_TX_VMODE_CTRL1 0xc4
+#define QSERDES_V4_20_TX_PI_QEC_CTRL 0xe0
+
/* Only for QMP V4 PHY - RX registers */
#define QSERDES_V4_RX_UCDR_FO_GAIN 0x008
#define QSERDES_V4_RX_UCDR_SO_GAIN 0x014
@@ -551,6 +697,33 @@
#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS 0x0d8
#define QSERDES_V4_DP_PHY_STATUS 0x0dc
+/* Only for QMP V4_20 PHY - RX registers */
+#define QSERDES_V4_20_RX_FO_GAIN_RATE2 0x008
+#define QSERDES_V4_20_RX_UCDR_PI_CONTROLS 0x058
+#define QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE 0x0ac
+#define QSERDES_V4_20_RX_DFE_3 0x110
+#define QSERDES_V4_20_RX_DFE_DAC_ENABLE1 0x134
+#define QSERDES_V4_20_RX_DFE_DAC_ENABLE2 0x138
+#define QSERDES_V4_20_RX_VGA_CAL_CNTRL2 0x150
+#define QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x178
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1 0x1c8
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2 0x1cc
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3 0x1d0
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4 0x1d4
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B0 0x1d8
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B1 0x1dc
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B2 0x1e0
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B3 0x1e4
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B4 0x1e8
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B0 0x1ec
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B1 0x1f0
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B2 0x1f4
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B3 0x1f8
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B4 0x1fc
+#define QSERDES_V4_20_RX_PHPRE_CTRL 0x200
+#define QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x20c
+#define QSERDES_V4_20_RX_MARG_COARSE_CTRL2 0x23c
+
/* Only for QMP V4 PHY - UFS PCS registers */
#define QPHY_V4_PCS_UFS_PHY_START 0x000
#define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL 0x004
@@ -836,6 +1009,12 @@
#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x354
#define QPHY_V4_PCS_USB3_TEST_CONTROL 0x358
+/* Only for QMP V4_20 PHY - USB/PCIe PCS registers */
+#define QPHY_V4_20_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V4_20_PCS_EQ_CONFIG2 0x1d8
+#define QPHY_V4_20_PCS_EQ_CONFIG4 0x1e0
+#define QPHY_V4_20_PCS_EQ_CONFIG5 0x1e4
+
/* Only for QMP V4 PHY - UNI has 0x300 offset for PCS_USB3 regs */
#define QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL 0x618
#define QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2 0x638
@@ -861,6 +1040,14 @@
#define QPHY_V4_PCS_PCIE_PRESET_P10_PRE 0xbc
#define QPHY_V4_PCS_PCIE_PRESET_P10_POST 0xe0
+#define QPHY_V4_20_PCS_PCIE_EQ_CONFIG1 0x0a0
+#define QPHY_V4_20_PCS_PCIE_G3_RXEQEVAL_TIME 0x0f0
+#define QPHY_V4_20_PCS_PCIE_G4_RXEQEVAL_TIME 0x0f4
+#define QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG2 0x0fc
+#define QPHY_V4_20_PCS_PCIE_G4_EQ_CONFIG5 0x108
+#define QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2 0x824
+#define QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2 0x828
+
/* Only for QMP V5 PHY - QSERDES COM registers */
#define QSERDES_V5_COM_PLL_IVCO 0x058
#define QSERDES_V5_COM_CP_CTRL_MODE0 0x074
diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig
index ecc309ba9fee..c2373b30b8a6 100644
--- a/drivers/phy/ralink/Kconfig
+++ b/drivers/phy/ralink/Kconfig
@@ -4,7 +4,7 @@
#
config PHY_MT7621_PCI
tristate "MediaTek MT7621 PCI PHY Driver"
- depends on RALINK && OF
+ depends on (RALINK && OF) || COMPILE_TEST
select GENERIC_PHY
select REGMAP_MMIO
help
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
index 2a9465f4bb3a..5e6530f545b5 100644
--- a/drivers/phy/ralink/phy-mt7621-pci.c
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/module.h>
@@ -14,8 +15,6 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/sys_soc.h>
-#include <mt7621.h>
-#include <ralink_regs.h>
#define RG_PE1_PIPE_REG 0x02c
#define RG_PE1_PIPE_RST BIT(12)
@@ -62,8 +61,6 @@
#define RG_PE1_FRC_MSTCKDIV BIT(5)
-#define XTAL_MASK GENMASK(8, 6)
-
#define MAX_PHYS 2
/**
@@ -71,6 +68,7 @@
* @dev: pointer to device
* @regmap: kernel regmap pointer
* @phy: pointer to the kernel PHY device
+ * @sys_clk: pointer to the system XTAL clock
* @port_base: base register
* @has_dual_port: if the phy has dual ports.
* @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
@@ -80,6 +78,7 @@ struct mt7621_pci_phy {
struct device *dev;
struct regmap *regmap;
struct phy *phy;
+ struct clk *sys_clk;
void __iomem *port_base;
bool has_dual_port;
bool bypass_pipe_rst;
@@ -116,12 +115,14 @@ static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
}
}
-static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
+static int mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
{
struct device *dev = phy->dev;
- u32 xtal_mode;
+ unsigned long clk_rate;
- xtal_mode = FIELD_GET(XTAL_MASK, rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0));
+ clk_rate = clk_get_rate(phy->sys_clk);
+ if (!clk_rate)
+ return -EINVAL;
/* Set PCIe Port PHY to disable SSC */
/* Debug Xtal Type */
@@ -139,13 +140,13 @@ static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
}
- if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
+ if (clk_rate == 40000000) { /* 40MHz Xtal */
/* Set Pre-divider ratio (for host mode) */
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
dev_dbg(dev, "Xtal is 40MHz\n");
- } else if (xtal_mode >= 6) { /* 25MHz Xal */
+ } else if (clk_rate == 25000000) { /* 25MHz Xal */
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
@@ -196,13 +197,15 @@ static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));
- if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
+ if (clk_rate == 40000000) { /* 40MHz Xtal */
/* set force mode enable of da_pe1_mstckdiv */
mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
RG_PE1_FRC_MSTCKDIV);
}
+
+ return 0;
}
static int mt7621_pci_phy_init(struct phy *phy)
@@ -212,9 +215,7 @@ static int mt7621_pci_phy_init(struct phy *phy)
if (mphy->bypass_pipe_rst)
mt7621_bypass_pipe_rst(mphy);
- mt7621_set_phy_for_ssc(mphy);
-
- return 0;
+ return mt7621_set_phy_for_ssc(mphy);
}
static int mt7621_pci_phy_power_on(struct phy *phy)
@@ -272,8 +273,8 @@ static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
mt7621_phy->has_dual_port = args->args[0];
- dev_info(dev, "PHY for 0x%08x (dual port = %d)\n",
- (unsigned int)mt7621_phy->port_base, mt7621_phy->has_dual_port);
+ dev_dbg(dev, "PHY for 0x%px (dual port = %d)\n",
+ mt7621_phy->port_base, mt7621_phy->has_dual_port);
return mt7621_phy->phy;
}
@@ -324,6 +325,12 @@ static int mt7621_pci_phy_probe(struct platform_device *pdev)
return PTR_ERR(phy->phy);
}
+ phy->sys_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(phy->sys_clk)) {
+ dev_err(dev, "failed to get phy clock\n");
+ return PTR_ERR(phy->sys_clk);
+ }
+
phy_set_drvdata(phy->phy, phy);
provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 159285f42e5c..e812adad7242 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -48,6 +48,15 @@ config PHY_ROCKCHIP_INNO_USB2
help
Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+config PHY_ROCKCHIP_INNO_CSIDPHY
+ tristate "Rockchip Innosilicon MIPI CSI PHY driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ help
+ Enable this to support the Rockchip MIPI CSI PHY with
+ Innosilicon IP block.
+
config PHY_ROCKCHIP_INNO_DSIDPHY
tristate "Rockchip Innosilicon MIPI/LVDS/TTL PHY driver"
depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index c3cfc7f0af5c..f0eec212b2aa 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0.o
obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY) += phy-rockchip-inno-csidphy.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
new file mode 100644
index 000000000000..ca13a604ab4f
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip MIPI RX Innosilicon DPHY driver
+ *
+ * Copyright (C) 2021 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* GRF */
+#define RK1808_GRF_PD_VI_CON_OFFSET 0x0430
+
+#define RK3326_GRF_PD_VI_CON_OFFSET 0x0430
+
+#define RK3368_GRF_SOC_CON6_OFFSET 0x0418
+
+/* PHY */
+#define CSIDPHY_CTRL_LANE_ENABLE 0x00
+#define CSIDPHY_CTRL_LANE_ENABLE_CK BIT(6)
+#define CSIDPHY_CTRL_LANE_ENABLE_MASK GENMASK(5, 2)
+#define CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED BIT(0)
+
+/* not present on all variants */
+#define CSIDPHY_CTRL_PWRCTL 0x04
+#define CSIDPHY_CTRL_PWRCTL_UNDEFINED GENMASK(7, 5)
+#define CSIDPHY_CTRL_PWRCTL_SYNCRST BIT(2)
+#define CSIDPHY_CTRL_PWRCTL_LDO_PD BIT(1)
+#define CSIDPHY_CTRL_PWRCTL_PLL_PD BIT(0)
+
+#define CSIDPHY_CTRL_DIG_RST 0x80
+#define CSIDPHY_CTRL_DIG_RST_UNDEFINED 0x1e
+#define CSIDPHY_CTRL_DIG_RST_RESET BIT(0)
+
+/* offset after ths_settle_offset */
+#define CSIDPHY_CLK_THS_SETTLE 0
+#define CSIDPHY_LANE_THS_SETTLE(n) (((n) + 1) * 0x80)
+#define CSIDPHY_THS_SETTLE_MASK GENMASK(6, 0)
+
+/* offset after calib_offset */
+#define CSIDPHY_CLK_CALIB_EN 0
+#define CSIDPHY_LANE_CALIB_EN(n) (((n) + 1) * 0x80)
+#define CSIDPHY_CALIB_EN BIT(7)
+
+/* Configure the count time of the THS-SETTLE by protocol. */
+#define RK1808_CSIDPHY_CLK_WR_THS_SETTLE 0x160
+#define RK3326_CSIDPHY_CLK_WR_THS_SETTLE 0x100
+#define RK3368_CSIDPHY_CLK_WR_THS_SETTLE 0x100
+
+/* Calibration reception enable */
+#define RK1808_CSIDPHY_CLK_CALIB_EN 0x168
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+ ((val) << (shift) | (mask) << ((shift) + 16))
+
+#define HZ_TO_MHZ(freq) div_u64(freq, 1000 * 1000)
+
+enum dphy_reg_id {
+ /* rk1808 & rk3326 */
+ GRF_DPHY_CSIPHY_FORCERXMODE,
+ GRF_DPHY_CSIPHY_CLKLANE_EN,
+ GRF_DPHY_CSIPHY_DATALANE_EN,
+};
+
+struct dphy_reg {
+ u32 offset;
+ u32 mask;
+ u32 shift;
+};
+
+#define PHY_REG(_offset, _width, _shift) \
+ { .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
+
+static const struct dphy_reg rk1808_grf_dphy_regs[] = {
+ [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 0),
+ [GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 1, 8),
+ [GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK1808_GRF_PD_VI_CON_OFFSET, 4, 4),
+};
+
+static const struct dphy_reg rk3326_grf_dphy_regs[] = {
+ [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 0),
+ [GRF_DPHY_CSIPHY_CLKLANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 1, 8),
+ [GRF_DPHY_CSIPHY_DATALANE_EN] = PHY_REG(RK3326_GRF_PD_VI_CON_OFFSET, 4, 4),
+};
+
+static const struct dphy_reg rk3368_grf_dphy_regs[] = {
+ [GRF_DPHY_CSIPHY_FORCERXMODE] = PHY_REG(RK3368_GRF_SOC_CON6_OFFSET, 4, 8),
+};
+
+struct hsfreq_range {
+ u32 range_h;
+ u8 cfg_bit;
+};
+
+struct dphy_drv_data {
+ int pwrctl_offset;
+ int ths_settle_offset;
+ int calib_offset;
+ const struct hsfreq_range *hsfreq_ranges;
+ int num_hsfreq_ranges;
+ const struct dphy_reg *grf_regs;
+};
+
+struct rockchip_inno_csidphy {
+ struct device *dev;
+ void __iomem *phy_base;
+ struct clk *pclk;
+ struct regmap *grf;
+ struct reset_control *rst;
+ const struct dphy_drv_data *drv_data;
+ struct phy_configure_opts_mipi_dphy config;
+ u8 hsfreq;
+};
+
+static inline void write_grf_reg(struct rockchip_inno_csidphy *priv,
+ int index, u8 value)
+{
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ const struct dphy_reg *reg = &drv_data->grf_regs[index];
+
+ if (reg->offset)
+ regmap_write(priv->grf, reg->offset,
+ HIWORD_UPDATE(value, reg->mask, reg->shift));
+}
+
+/* These tables must be sorted by .range_h ascending. */
+static const struct hsfreq_range rk1808_mipidphy_hsfreq_ranges[] = {
+ { 109, 0x02}, { 149, 0x03}, { 199, 0x06}, { 249, 0x06},
+ { 299, 0x06}, { 399, 0x08}, { 499, 0x0b}, { 599, 0x0e},
+ { 699, 0x10}, { 799, 0x12}, { 999, 0x16}, {1199, 0x1e},
+ {1399, 0x23}, {1599, 0x2d}, {1799, 0x32}, {1999, 0x37},
+ {2199, 0x3c}, {2399, 0x41}, {2499, 0x46}
+};
+
+static const struct hsfreq_range rk3326_mipidphy_hsfreq_ranges[] = {
+ { 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
+ { 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
+ { 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
+ {1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
+};
+
+static const struct hsfreq_range rk3368_mipidphy_hsfreq_ranges[] = {
+ { 109, 0x00}, { 149, 0x01}, { 199, 0x02}, { 249, 0x03},
+ { 299, 0x04}, { 399, 0x05}, { 499, 0x06}, { 599, 0x07},
+ { 699, 0x08}, { 799, 0x09}, { 899, 0x0a}, {1099, 0x0b},
+ {1249, 0x0c}, {1349, 0x0d}, {1500, 0x0e}
+};
+
+static void rockchip_inno_csidphy_ths_settle(struct rockchip_inno_csidphy *priv,
+ int hsfreq, int offset)
+{
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ u32 val;
+
+ val = readl(priv->phy_base + drv_data->ths_settle_offset + offset);
+ val &= ~CSIDPHY_THS_SETTLE_MASK;
+ val |= hsfreq;
+ writel(val, priv->phy_base + drv_data->ths_settle_offset + offset);
+}
+
+static int rockchip_inno_csidphy_configure(struct phy *phy,
+ union phy_configure_opts *opts)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ struct phy_configure_opts_mipi_dphy *config = &opts->mipi_dphy;
+ unsigned int hsfreq = 0;
+ unsigned int i;
+ u64 data_rate_mbps;
+ int ret;
+
+ /* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
+ ret = phy_mipi_dphy_config_validate(config);
+ if (ret)
+ return ret;
+
+ data_rate_mbps = HZ_TO_MHZ(config->hs_clk_rate);
+
+ dev_dbg(priv->dev, "lanes %d - data_rate_mbps %llu\n",
+ config->lanes, data_rate_mbps);
+ for (i = 0; i < drv_data->num_hsfreq_ranges; i++) {
+ if (drv_data->hsfreq_ranges[i].range_h >= data_rate_mbps) {
+ hsfreq = drv_data->hsfreq_ranges[i].cfg_bit;
+ break;
+ }
+ }
+ if (!hsfreq)
+ return -EINVAL;
+
+ priv->hsfreq = hsfreq;
+ priv->config = *config;
+ return 0;
+}
+
+static int rockchip_inno_csidphy_power_on(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+ u64 data_rate_mbps = HZ_TO_MHZ(priv->config.hs_clk_rate);
+ u32 val;
+ int ret, i;
+
+ ret = clk_enable(priv->pclk);
+ if (ret < 0)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(priv->dev);
+ if (ret < 0) {
+ clk_disable(priv->pclk);
+ return ret;
+ }
+
+ /* phy start */
+ if (drv_data->pwrctl_offset >= 0)
+ writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
+ CSIDPHY_CTRL_PWRCTL_SYNCRST,
+ priv->phy_base + drv_data->pwrctl_offset);
+
+ /* set data lane num and enable clock lane */
+ val = FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_MASK, GENMASK(priv->config.lanes - 1, 0)) |
+ FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_CK, 1) |
+ FIELD_PREP(CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED, 1);
+ writel(val, priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
+
+ /* Reset dphy analog part */
+ if (drv_data->pwrctl_offset >= 0)
+ writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED,
+ priv->phy_base + drv_data->pwrctl_offset);
+ usleep_range(500, 1000);
+
+ /* Reset dphy digital part */
+ writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED,
+ priv->phy_base + CSIDPHY_CTRL_DIG_RST);
+ writel(CSIDPHY_CTRL_DIG_RST_UNDEFINED + CSIDPHY_CTRL_DIG_RST_RESET,
+ priv->phy_base + CSIDPHY_CTRL_DIG_RST);
+
+ /* not into receive mode/wait stopstate */
+ write_grf_reg(priv, GRF_DPHY_CSIPHY_FORCERXMODE, 0x0);
+
+ /* enable calibration */
+ if (data_rate_mbps > 1500 && drv_data->calib_offset >= 0) {
+ writel(CSIDPHY_CALIB_EN,
+ priv->phy_base + drv_data->calib_offset +
+ CSIDPHY_CLK_CALIB_EN);
+ for (i = 0; i < priv->config.lanes; i++)
+ writel(CSIDPHY_CALIB_EN,
+ priv->phy_base + drv_data->calib_offset +
+ CSIDPHY_LANE_CALIB_EN(i));
+ }
+
+ rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
+ CSIDPHY_CLK_THS_SETTLE);
+ for (i = 0; i < priv->config.lanes; i++)
+ rockchip_inno_csidphy_ths_settle(priv, priv->hsfreq,
+ CSIDPHY_LANE_THS_SETTLE(i));
+
+ write_grf_reg(priv, GRF_DPHY_CSIPHY_CLKLANE_EN, 0x1);
+ write_grf_reg(priv, GRF_DPHY_CSIPHY_DATALANE_EN,
+ GENMASK(priv->config.lanes - 1, 0));
+
+ return 0;
+}
+
+static int rockchip_inno_csidphy_power_off(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+ const struct dphy_drv_data *drv_data = priv->drv_data;
+
+ /* disable all lanes */
+ writel(CSIDPHY_CTRL_LANE_ENABLE_UNDEFINED,
+ priv->phy_base + CSIDPHY_CTRL_LANE_ENABLE);
+
+ /* disable pll and ldo */
+ if (drv_data->pwrctl_offset >= 0)
+ writel(CSIDPHY_CTRL_PWRCTL_UNDEFINED |
+ CSIDPHY_CTRL_PWRCTL_LDO_PD |
+ CSIDPHY_CTRL_PWRCTL_PLL_PD,
+ priv->phy_base + drv_data->pwrctl_offset);
+ usleep_range(500, 1000);
+
+ pm_runtime_put(priv->dev);
+ clk_disable(priv->pclk);
+
+ return 0;
+}
+
+static int rockchip_inno_csidphy_init(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+
+ return clk_prepare(priv->pclk);
+}
+
+static int rockchip_inno_csidphy_exit(struct phy *phy)
+{
+ struct rockchip_inno_csidphy *priv = phy_get_drvdata(phy);
+
+ clk_unprepare(priv->pclk);
+
+ return 0;
+}
+
+static const struct phy_ops rockchip_inno_csidphy_ops = {
+ .power_on = rockchip_inno_csidphy_power_on,
+ .power_off = rockchip_inno_csidphy_power_off,
+ .init = rockchip_inno_csidphy_init,
+ .exit = rockchip_inno_csidphy_exit,
+ .configure = rockchip_inno_csidphy_configure,
+ .owner = THIS_MODULE,
+};
+
+static const struct dphy_drv_data rk1808_mipidphy_drv_data = {
+ .pwrctl_offset = -1,
+ .ths_settle_offset = RK1808_CSIDPHY_CLK_WR_THS_SETTLE,
+ .calib_offset = RK1808_CSIDPHY_CLK_CALIB_EN,
+ .hsfreq_ranges = rk1808_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk1808_mipidphy_hsfreq_ranges),
+ .grf_regs = rk1808_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3326_mipidphy_drv_data = {
+ .pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
+ .ths_settle_offset = RK3326_CSIDPHY_CLK_WR_THS_SETTLE,
+ .calib_offset = -1,
+ .hsfreq_ranges = rk3326_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk3326_mipidphy_hsfreq_ranges),
+ .grf_regs = rk3326_grf_dphy_regs,
+};
+
+static const struct dphy_drv_data rk3368_mipidphy_drv_data = {
+ .pwrctl_offset = CSIDPHY_CTRL_PWRCTL,
+ .ths_settle_offset = RK3368_CSIDPHY_CLK_WR_THS_SETTLE,
+ .calib_offset = -1,
+ .hsfreq_ranges = rk3368_mipidphy_hsfreq_ranges,
+ .num_hsfreq_ranges = ARRAY_SIZE(rk3368_mipidphy_hsfreq_ranges),
+ .grf_regs = rk3368_grf_dphy_regs,
+};
+
+static const struct of_device_id rockchip_inno_csidphy_match_id[] = {
+ {
+ .compatible = "rockchip,px30-csi-dphy",
+ .data = &rk3326_mipidphy_drv_data,
+ },
+ {
+ .compatible = "rockchip,rk1808-csi-dphy",
+ .data = &rk1808_mipidphy_drv_data,
+ },
+ {
+ .compatible = "rockchip,rk3326-csi-dphy",
+ .data = &rk3326_mipidphy_drv_data,
+ },
+ {
+ .compatible = "rockchip,rk3368-csi-dphy",
+ .data = &rk3368_mipidphy_drv_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rockchip_inno_csidphy_match_id);
+
+static int rockchip_inno_csidphy_probe(struct platform_device *pdev)
+{
+ struct rockchip_inno_csidphy *priv;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct phy *phy;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ platform_set_drvdata(pdev, priv);
+
+ priv->drv_data = of_device_get_match_data(dev);
+ if (!priv->drv_data) {
+ dev_err(dev, "Can't find device data\n");
+ return -ENODEV;
+ }
+
+ priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,grf");
+ if (IS_ERR(priv->grf)) {
+ dev_err(dev, "Can't find GRF syscon\n");
+ return PTR_ERR(priv->grf);
+ }
+
+ priv->phy_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->phy_base))
+ return PTR_ERR(priv->phy_base);
+
+ priv->pclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(priv->pclk)) {
+ dev_err(dev, "failed to get pclk\n");
+ return PTR_ERR(priv->pclk);
+ }
+
+ priv->rst = devm_reset_control_get(dev, "apb");
+ if (IS_ERR(priv->rst)) {
+ dev_err(dev, "failed to get system reset control\n");
+ return PTR_ERR(priv->rst);
+ }
+
+ phy = devm_phy_create(dev, NULL, &rockchip_inno_csidphy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static int rockchip_inno_csidphy_remove(struct platform_device *pdev)
+{
+ struct rockchip_inno_csidphy *priv = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(priv->dev);
+
+ return 0;
+}
+
+static struct platform_driver rockchip_inno_csidphy_driver = {
+ .driver = {
+ .name = "rockchip-inno-csidphy",
+ .of_match_table = rockchip_inno_csidphy_match_id,
+ },
+ .probe = rockchip_inno_csidphy_probe,
+ .remove = rockchip_inno_csidphy_remove,
+};
+
+module_platform_driver(rockchip_inno_csidphy_driver);
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
+MODULE_DESCRIPTION("Rockchip MIPI Innosilicon CSI-DPHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index a37f3f342642..80acca4e9e14 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -620,7 +620,7 @@ static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
- const struct pre_pll_config *cfg = pre_pll_cfg_table;
+ const struct pre_pll_config *cfg;
unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
u32 v;
int ret;
@@ -774,7 +774,7 @@ static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
- const struct pre_pll_config *cfg = pre_pll_cfg_table;
+ const struct pre_pll_config *cfg;
unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
u32 val;
int ret;
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 46ebdb1460a3..beacac1dd253 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1256,6 +1256,49 @@ static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
{ /* sentinel */ }
};
+static const struct rockchip_usb2phy_cfg rk3308_phy_cfgs[] = {
+ {
+ .reg = 0x100,
+ .num_ports = 2,
+ .clkout_ctl = { 0x108, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0100, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x3020, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x3024, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x3028, 2, 2, 0, 1 },
+ .ls_det_en = { 0x3020, 0, 0, 0, 1 },
+ .ls_det_st = { 0x3024, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x3028, 0, 0, 0, 1 },
+ .utmi_avalid = { 0x0120, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x0120, 9, 9, 0, 1 },
+ .utmi_ls = { 0x0120, 5, 4, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0104, 8, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x3020, 1, 1, 0, 1 },
+ .ls_det_st = { 0x3024, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x3028, 1, 1, 0, 1 },
+ .utmi_ls = { 0x0120, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x0120, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0100, 3, 0, 5, 1 },
+ .cp_det = { 0x0120, 24, 24, 0, 1 },
+ .dcp_det = { 0x0120, 23, 23, 0, 1 },
+ .dp_det = { 0x0120, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0108, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0108, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0108, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0108, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0108, 11, 11, 0, 1 },
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
{
.reg = 0x100,
@@ -1425,6 +1468,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+ { .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index e4adab375c73..6bdbd1f214dd 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -24,11 +24,13 @@
#define PORT_SEL_1 FIELD_PREP(PORT_SEL_MASK, 1)
#define PCL_PHY_TEST_I 0x2000
-#define PCL_PHY_TEST_O 0x2004
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
+#define PCL_PHY_TEST_O 0x2004
+#define TESTO_DAT_MASK GENMASK(7, 0)
+
#define PCL_PHY_RESET 0x200c
#define PCL_PHY_RESET_N_MNMODE BIT(8) /* =1:manual */
#define PCL_PHY_RESET_N BIT(0) /* =1:deasssert */
@@ -77,11 +79,12 @@ static void uniphier_pciephy_set_param(struct uniphier_pciephy_priv *priv,
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
uniphier_pciephy_testio_write(priv, val);
- val = readl(priv->base + PCL_PHY_TEST_O);
+ val = readl(priv->base + PCL_PHY_TEST_O) & TESTO_DAT_MASK;
/* update value */
- val &= ~FIELD_PREP(TESTI_DAT_MASK, mask);
- val = FIELD_PREP(TESTI_DAT_MASK, mask & param);
+ val &= ~mask;
+ val |= mask & param;
+ val = FIELD_PREP(TESTI_DAT_MASK, val);
val |= FIELD_PREP(TESTI_ADR_MASK, reg);
uniphier_pciephy_testio_write(priv, val);
uniphier_pciephy_testio_write(priv, val | TESTI_WR_EN);
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index c184f4e34584..3e491dfb2525 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -57,6 +57,7 @@ struct pll_params {
struct stm32_usbphyc_phy {
struct phy *phy;
struct stm32_usbphyc *usbphyc;
+ struct regulator *vbus;
u32 index;
bool active;
};
@@ -291,9 +292,31 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
return stm32_usbphyc_pll_disable(usbphyc);
}
+static int stm32_usbphyc_phy_power_on(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_enable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
+static int stm32_usbphyc_phy_power_off(struct phy *phy)
+{
+ struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
+
+ if (usbphyc_phy->vbus)
+ return regulator_disable(usbphyc_phy->vbus);
+
+ return 0;
+}
+
static const struct phy_ops stm32_usbphyc_phy_ops = {
.init = stm32_usbphyc_phy_init,
.exit = stm32_usbphyc_phy_exit,
+ .power_on = stm32_usbphyc_phy_power_on,
+ .power_off = stm32_usbphyc_phy_power_off,
.owner = THIS_MODULE,
};
@@ -519,6 +542,14 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
usbphyc->phys[port]->index = index;
usbphyc->phys[port]->active = false;
+ usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus");
+ if (IS_ERR(usbphyc->phys[port]->vbus)) {
+ ret = PTR_ERR(usbphyc->phys[port]->vbus);
+ if (ret == -EPROBE_DEFER)
+ goto put_child;
+ usbphyc->phys[port]->vbus = NULL;
+ }
+
port++;
}
diff --git a/drivers/phy/ti/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
index 57adc08a89b2..9fe6ea6fdae5 100644
--- a/drivers/phy/ti/phy-dm816x-usb.c
+++ b/drivers/phy/ti/phy-dm816x-usb.c
@@ -242,19 +242,28 @@ static int dm816x_usb_phy_probe(struct platform_device *pdev)
pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
- if (IS_ERR(generic_phy))
- return PTR_ERR(generic_phy);
+ if (IS_ERR(generic_phy)) {
+ error = PTR_ERR(generic_phy);
+ goto clk_unprepare;
+ }
phy_set_drvdata(generic_phy, phy);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
- if (IS_ERR(phy_provider))
- return PTR_ERR(phy_provider);
+ if (IS_ERR(phy_provider)) {
+ error = PTR_ERR(phy_provider);
+ goto clk_unprepare;
+ }
usb_add_phy_dev(&phy->phy);
return 0;
+
+clk_unprepare:
+ pm_runtime_disable(phy->dev);
+ clk_unprepare(phy->refclk);
+ return error;
}
static int dm816x_usb_phy_remove(struct platform_device *pdev)
diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
index 812e5409d359..5771e2486a3b 100644
--- a/drivers/phy/ti/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -544,8 +544,8 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
return 0;
}
-static ssize_t twl4030_usb_vbus_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t vbus_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct twl4030_usb *twl = dev_get_drvdata(dev);
int ret = -EINVAL;
@@ -557,7 +557,7 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
return ret;
}
-static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
+static DEVICE_ATTR_RO(vbus);
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
{
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index d40ed8621571..9610a9f08ff4 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -369,6 +369,7 @@ err_out:
dev->card_link = NULL;
return NULL;
}
+EXPORT_SYMBOL(pnp_request_card_device);
/**
* pnp_release_card_device - call this when the driver no longer needs the device
@@ -382,6 +383,7 @@ void pnp_release_card_device(struct pnp_dev *dev)
device_release_driver(&dev->dev);
drv->link.remove = &card_remove_first;
}
+EXPORT_SYMBOL(pnp_release_card_device);
/*
* suspend/resume callbacks
@@ -439,6 +441,7 @@ int pnp_register_card_driver(struct pnp_card_driver *drv)
}
return 0;
}
+EXPORT_SYMBOL(pnp_register_card_driver);
/**
* pnp_unregister_card_driver - unregisters a PnP card driver from the PnP Layer
@@ -451,8 +454,4 @@ void pnp_unregister_card_driver(struct pnp_card_driver *drv)
mutex_unlock(&pnp_lock);
pnp_unregister_driver(&drv->link);
}
-
-EXPORT_SYMBOL(pnp_request_card_device);
-EXPORT_SYMBOL(pnp_release_card_device);
-EXPORT_SYMBOL(pnp_register_card_driver);
EXPORT_SYMBOL(pnp_unregister_card_driver);
diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c
index 93a30a8f88d1..c29d590c5e4f 100644
--- a/drivers/pnp/driver.c
+++ b/drivers/pnp/driver.c
@@ -68,6 +68,7 @@ int pnp_device_attach(struct pnp_dev *pnp_dev)
mutex_unlock(&pnp_lock);
return 0;
}
+EXPORT_SYMBOL(pnp_device_attach);
void pnp_device_detach(struct pnp_dev *pnp_dev)
{
@@ -76,6 +77,7 @@ void pnp_device_detach(struct pnp_dev *pnp_dev)
pnp_dev->status = PNP_READY;
mutex_unlock(&pnp_lock);
}
+EXPORT_SYMBOL(pnp_device_detach);
static int pnp_device_probe(struct device *dev)
{
@@ -271,11 +273,13 @@ int pnp_register_driver(struct pnp_driver *drv)
return driver_register(&drv->driver);
}
+EXPORT_SYMBOL(pnp_register_driver);
void pnp_unregister_driver(struct pnp_driver *drv)
{
driver_unregister(&drv->driver);
}
+EXPORT_SYMBOL(pnp_unregister_driver);
/**
* pnp_add_id - adds an EISA id to the specified device
@@ -310,8 +314,3 @@ struct pnp_id *pnp_add_id(struct pnp_dev *dev, const char *id)
return dev_id;
}
-
-EXPORT_SYMBOL(pnp_register_driver);
-EXPORT_SYMBOL(pnp_unregister_driver);
-EXPORT_SYMBOL(pnp_device_attach);
-EXPORT_SYMBOL(pnp_device_detach);
diff --git a/drivers/pnp/isapnp/compat.c b/drivers/pnp/isapnp/compat.c
index 035e95092489..d60d9e377da5 100644
--- a/drivers/pnp/isapnp/compat.c
+++ b/drivers/pnp/isapnp/compat.c
@@ -63,5 +63,4 @@ struct pnp_dev *pnp_find_dev(struct pnp_card *card, unsigned short vendor,
}
return NULL;
}
-
EXPORT_SYMBOL(pnp_find_dev);
diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c
index 144055593ec8..1765d6e60a8a 100644
--- a/drivers/pnp/manager.c
+++ b/drivers/pnp/manager.c
@@ -350,6 +350,7 @@ int pnp_start_dev(struct pnp_dev *dev)
dev_info(&dev->dev, "activated\n");
return 0;
}
+EXPORT_SYMBOL(pnp_start_dev);
/**
* pnp_stop_dev - low-level disable of the PnP device
@@ -371,6 +372,7 @@ int pnp_stop_dev(struct pnp_dev *dev)
dev_info(&dev->dev, "disabled\n");
return 0;
}
+EXPORT_SYMBOL(pnp_stop_dev);
/**
* pnp_activate_dev - activates a PnP device for use
@@ -396,6 +398,7 @@ int pnp_activate_dev(struct pnp_dev *dev)
dev->active = 1;
return 0;
}
+EXPORT_SYMBOL(pnp_activate_dev);
/**
* pnp_disable_dev - disables device
@@ -423,8 +426,4 @@ int pnp_disable_dev(struct pnp_dev *dev)
return 0;
}
-
-EXPORT_SYMBOL(pnp_start_dev);
-EXPORT_SYMBOL(pnp_stop_dev);
-EXPORT_SYMBOL(pnp_activate_dev);
EXPORT_SYMBOL(pnp_disable_dev);
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index e4f53d31191d..a6073db10ec6 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -30,7 +30,6 @@ int pnp_is_active(struct pnp_dev *dev)
else
return 1;
}
-
EXPORT_SYMBOL(pnp_is_active);
/*
diff --git a/drivers/siox/siox-bus-gpio.c b/drivers/siox/siox-bus-gpio.c
index 46b4cda36bac..aeefeb725524 100644
--- a/drivers/siox/siox-bus-gpio.c
+++ b/drivers/siox/siox-bus-gpio.c
@@ -102,29 +102,29 @@ static int siox_gpio_probe(struct platform_device *pdev)
ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN);
if (IS_ERR(ddata->din)) {
- ret = PTR_ERR(ddata->din);
- dev_err(dev, "Failed to get %s GPIO: %d\n", "din", ret);
+ ret = dev_err_probe(dev, PTR_ERR(ddata->din),
+ "Failed to get din GPIO\n");
goto err;
}
ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW);
if (IS_ERR(ddata->dout)) {
- ret = PTR_ERR(ddata->dout);
- dev_err(dev, "Failed to get %s GPIO: %d\n", "dout", ret);
+ ret = dev_err_probe(dev, PTR_ERR(ddata->dout),
+ "Failed to get dout GPIO\n");
goto err;
}
ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW);
if (IS_ERR(ddata->dclk)) {
- ret = PTR_ERR(ddata->dclk);
- dev_err(dev, "Failed to get %s GPIO: %d\n", "dclk", ret);
+ ret = dev_err_probe(dev, PTR_ERR(ddata->dclk),
+ "Failed to get dclk GPIO\n");
goto err;
}
ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW);
if (IS_ERR(ddata->dld)) {
- ret = PTR_ERR(ddata->dld);
- dev_err(dev, "Failed to get %s GPIO: %d\n", "dld", ret);
+ ret = dev_err_probe(dev, PTR_ERR(ddata->dld),
+ "Failed to get dld GPIO\n");
goto err;
}
@@ -134,7 +134,8 @@ static int siox_gpio_probe(struct platform_device *pdev)
ret = siox_master_register(smaster);
if (ret) {
- dev_err(dev, "Failed to register siox master: %d\n", ret);
+ dev_err_probe(dev, ret,
+ "Failed to register siox master\n");
err:
siox_master_put(smaster);
}
diff --git a/drivers/soundwire/Kconfig b/drivers/soundwire/Kconfig
index 016e74230bb7..2b7795233282 100644
--- a/drivers/soundwire/Kconfig
+++ b/drivers/soundwire/Kconfig
@@ -25,6 +25,7 @@ config SOUNDWIRE_INTEL
tristate "Intel SoundWire Master driver"
select SOUNDWIRE_CADENCE
select SOUNDWIRE_GENERIC_ALLOCATION
+ select AUXILIARY_BUS
depends on ACPI && SND_SOC
help
SoundWire Intel Master driver.
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 5d5b0bd59ae3..3e6d4addac2f 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -394,13 +394,13 @@ sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
}
static int
-sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
{
struct sdw_msg msg;
int ret;
ret = sdw_fill_msg(&msg, slave, addr, count,
- slave->dev_num, SDW_MSG_FLAG_WRITE, val);
+ slave->dev_num, SDW_MSG_FLAG_WRITE, (u8 *)val);
if (ret < 0)
return ret;
@@ -550,9 +550,9 @@ EXPORT_SYMBOL(sdw_nread);
* @slave: SDW Slave
* @addr: Register address
* @count: length
- * @val: Buffer for values to be read
+ * @val: Buffer for values to be written
*/
-int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
{
int ret;
@@ -836,26 +836,6 @@ static void sdw_modify_slave_status(struct sdw_slave *slave,
mutex_unlock(&bus->bus_lock);
}
-static enum sdw_clk_stop_mode sdw_get_clk_stop_mode(struct sdw_slave *slave)
-{
- enum sdw_clk_stop_mode mode;
-
- /*
- * Query for clock stop mode if Slave implements
- * ops->get_clk_stop_mode, else read from property.
- */
- if (slave->ops && slave->ops->get_clk_stop_mode) {
- mode = slave->ops->get_clk_stop_mode(slave);
- } else {
- if (slave->prop.clk_stop_mode1)
- mode = SDW_CLK_STOP_MODE1;
- else
- mode = SDW_CLK_STOP_MODE0;
- }
-
- return mode;
-}
-
static int sdw_slave_clk_stop_callback(struct sdw_slave *slave,
enum sdw_clk_stop_mode mode,
enum sdw_clk_stop_type type)
@@ -864,11 +844,8 @@ static int sdw_slave_clk_stop_callback(struct sdw_slave *slave,
if (slave->ops && slave->ops->clk_stop) {
ret = slave->ops->clk_stop(slave, mode, type);
- if (ret < 0) {
- dev_err(&slave->dev,
- "Clk Stop type =%d failed: %d\n", type, ret);
+ if (ret < 0)
return ret;
- }
}
return 0;
@@ -895,7 +872,8 @@ static int sdw_slave_clk_stop_prepare(struct sdw_slave *slave,
} else {
ret = sdw_read_no_pm(slave, SDW_SCP_SYSTEMCTRL);
if (ret < 0) {
- dev_err(&slave->dev, "SDW_SCP_SYSTEMCTRL read failed:%d\n", ret);
+ if (ret != -ENODATA)
+ dev_err(&slave->dev, "SDW_SCP_SYSTEMCTRL read failed:%d\n", ret);
return ret;
}
val = ret;
@@ -904,9 +882,8 @@ static int sdw_slave_clk_stop_prepare(struct sdw_slave *slave,
ret = sdw_write_no_pm(slave, SDW_SCP_SYSTEMCTRL, val);
- if (ret < 0)
- dev_err(&slave->dev,
- "Clock Stop prepare failed for slave: %d", ret);
+ if (ret < 0 && ret != -ENODATA)
+ dev_err(&slave->dev, "SDW_SCP_SYSTEMCTRL write failed:%d\n", ret);
return ret;
}
@@ -924,7 +901,7 @@ static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num)
}
val &= SDW_SCP_STAT_CLK_STP_NF;
if (!val) {
- dev_dbg(bus->dev, "clock stop prep/de-prep done slave:%d",
+ dev_dbg(bus->dev, "clock stop prep/de-prep done slave:%d\n",
dev_num);
return 0;
}
@@ -933,7 +910,7 @@ static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num)
retry--;
} while (retry);
- dev_err(bus->dev, "clock stop prep/de-prep failed slave:%d",
+ dev_err(bus->dev, "clock stop prep/de-prep failed slave:%d\n",
dev_num);
return -ETIMEDOUT;
@@ -948,7 +925,6 @@ static int sdw_bus_wait_for_clk_prep_deprep(struct sdw_bus *bus, u16 dev_num)
*/
int sdw_bus_prep_clk_stop(struct sdw_bus *bus)
{
- enum sdw_clk_stop_mode slave_mode;
bool simple_clk_stop = true;
struct sdw_slave *slave;
bool is_slave = false;
@@ -958,6 +934,9 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus)
* In order to save on transition time, prepare
* each Slave and then wait for all Slave(s) to be
* prepared for clock stop.
+ * If one of the Slave devices has lost sync and
+ * replies with Command Ignored/-ENODATA, we continue
+ * the loop
*/
list_for_each_entry(slave, &bus->slaves, node) {
if (!slave->dev_num)
@@ -970,36 +949,45 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus)
/* Identify if Slave(s) are available on Bus */
is_slave = true;
- slave_mode = sdw_get_clk_stop_mode(slave);
- slave->curr_clk_stop_mode = slave_mode;
-
- ret = sdw_slave_clk_stop_callback(slave, slave_mode,
+ ret = sdw_slave_clk_stop_callback(slave,
+ SDW_CLK_STOP_MODE0,
SDW_CLK_PRE_PREPARE);
- if (ret < 0) {
- dev_err(&slave->dev,
- "pre-prepare failed:%d", ret);
- return ret;
- }
-
- ret = sdw_slave_clk_stop_prepare(slave,
- slave_mode, true);
- if (ret < 0) {
- dev_err(&slave->dev,
- "pre-prepare failed:%d", ret);
+ if (ret < 0 && ret != -ENODATA) {
+ dev_err(&slave->dev, "clock stop pre-prepare cb failed:%d\n", ret);
return ret;
}
- if (slave_mode == SDW_CLK_STOP_MODE1)
+ /* Only prepare a Slave device if needed */
+ if (!slave->prop.simple_clk_stop_capable) {
simple_clk_stop = false;
+
+ ret = sdw_slave_clk_stop_prepare(slave,
+ SDW_CLK_STOP_MODE0,
+ true);
+ if (ret < 0 && ret != -ENODATA) {
+ dev_err(&slave->dev, "clock stop prepare failed:%d\n", ret);
+ return ret;
+ }
+ }
}
/* Skip remaining clock stop preparation if no Slave is attached */
if (!is_slave)
- return ret;
+ return 0;
+ /*
+ * Don't wait for all Slaves to be ready if they follow the simple
+ * state machine
+ */
if (!simple_clk_stop) {
ret = sdw_bus_wait_for_clk_prep_deprep(bus,
SDW_BROADCAST_DEV_NUM);
+ /*
+ * if there are no Slave devices present and the reply is
+ * Command_Ignored/-ENODATA, we don't need to continue with the
+ * flow and can just return here. The error code is not modified
+ * and its handling left as an exercise for the caller.
+ */
if (ret < 0)
return ret;
}
@@ -1013,21 +1001,17 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus)
slave->status != SDW_SLAVE_ALERT)
continue;
- slave_mode = slave->curr_clk_stop_mode;
-
- if (slave_mode == SDW_CLK_STOP_MODE1) {
- ret = sdw_slave_clk_stop_callback(slave,
- slave_mode,
- SDW_CLK_POST_PREPARE);
+ ret = sdw_slave_clk_stop_callback(slave,
+ SDW_CLK_STOP_MODE0,
+ SDW_CLK_POST_PREPARE);
- if (ret < 0) {
- dev_err(&slave->dev,
- "post-prepare failed:%d", ret);
- }
+ if (ret < 0 && ret != -ENODATA) {
+ dev_err(&slave->dev, "clock stop post-prepare cb failed:%d\n", ret);
+ return ret;
}
}
- return ret;
+ return 0;
}
EXPORT_SYMBOL(sdw_bus_prep_clk_stop);
@@ -1050,12 +1034,8 @@ int sdw_bus_clk_stop(struct sdw_bus *bus)
ret = sdw_bwrite_no_pm(bus, SDW_BROADCAST_DEV_NUM,
SDW_SCP_CTRL, SDW_SCP_CTRL_CLK_STP_NOW);
if (ret < 0) {
- if (ret == -ENODATA)
- dev_dbg(bus->dev,
- "ClockStopNow Broadcast msg ignored %d", ret);
- else
- dev_err(bus->dev,
- "ClockStopNow Broadcast msg failed %d", ret);
+ if (ret != -ENODATA)
+ dev_err(bus->dev, "ClockStopNow Broadcast msg failed %d\n", ret);
return ret;
}
@@ -1074,7 +1054,6 @@ EXPORT_SYMBOL(sdw_bus_clk_stop);
*/
int sdw_bus_exit_clk_stop(struct sdw_bus *bus)
{
- enum sdw_clk_stop_mode mode;
bool simple_clk_stop = true;
struct sdw_slave *slave;
bool is_slave = false;
@@ -1096,33 +1075,36 @@ int sdw_bus_exit_clk_stop(struct sdw_bus *bus)
/* Identify if Slave(s) are available on Bus */
is_slave = true;
- mode = slave->curr_clk_stop_mode;
-
- if (mode == SDW_CLK_STOP_MODE1) {
- simple_clk_stop = false;
- continue;
- }
-
- ret = sdw_slave_clk_stop_callback(slave, mode,
+ ret = sdw_slave_clk_stop_callback(slave, SDW_CLK_STOP_MODE0,
SDW_CLK_PRE_DEPREPARE);
if (ret < 0)
- dev_warn(&slave->dev,
- "clk stop deprep failed:%d", ret);
+ dev_warn(&slave->dev, "clock stop pre-deprepare cb failed:%d\n", ret);
- ret = sdw_slave_clk_stop_prepare(slave, mode,
- false);
+ /* Only de-prepare a Slave device if needed */
+ if (!slave->prop.simple_clk_stop_capable) {
+ simple_clk_stop = false;
- if (ret < 0)
- dev_warn(&slave->dev,
- "clk stop deprep failed:%d", ret);
+ ret = sdw_slave_clk_stop_prepare(slave, SDW_CLK_STOP_MODE0,
+ false);
+
+ if (ret < 0)
+ dev_warn(&slave->dev, "clock stop deprepare failed:%d\n", ret);
+ }
}
/* Skip remaining clock stop de-preparation if no Slave is attached */
if (!is_slave)
return 0;
- if (!simple_clk_stop)
- sdw_bus_wait_for_clk_prep_deprep(bus, SDW_BROADCAST_DEV_NUM);
+ /*
+ * Don't wait for all Slaves to be ready if they follow the simple
+ * state machine
+ */
+ if (!simple_clk_stop) {
+ ret = sdw_bus_wait_for_clk_prep_deprep(bus, SDW_BROADCAST_DEV_NUM);
+ if (ret < 0)
+ dev_warn(&slave->dev, "clock stop deprepare wait failed:%d\n", ret);
+ }
list_for_each_entry(slave, &bus->slaves, node) {
if (!slave->dev_num)
@@ -1132,9 +1114,10 @@ int sdw_bus_exit_clk_stop(struct sdw_bus *bus)
slave->status != SDW_SLAVE_ALERT)
continue;
- mode = slave->curr_clk_stop_mode;
- sdw_slave_clk_stop_callback(slave, mode,
- SDW_CLK_POST_DEPREPARE);
+ ret = sdw_slave_clk_stop_callback(slave, SDW_CLK_STOP_MODE0,
+ SDW_CLK_POST_DEPREPARE);
+ if (ret < 0)
+ dev_warn(&slave->dev, "clock stop post-deprepare cb failed:%d\n", ret);
}
return 0;
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
index 192dac10f0c2..25950422b085 100644
--- a/drivers/soundwire/cadence_master.c
+++ b/drivers/soundwire/cadence_master.c
@@ -1428,20 +1428,6 @@ int sdw_cdns_clock_stop(struct sdw_cdns *cdns, bool block_wake)
}
}
- /*
- * This CMD_ACCEPT should be used when there are no devices
- * attached on the link when entering clock stop mode. If this is
- * not set and there is a broadcast write then the command ignored
- * will be treated as a failure
- */
- if (!slave_present)
- cdns_updatel(cdns, CDNS_MCP_CONTROL,
- CDNS_MCP_CONTROL_CMD_ACCEPT,
- CDNS_MCP_CONTROL_CMD_ACCEPT);
- else
- cdns_updatel(cdns, CDNS_MCP_CONTROL,
- CDNS_MCP_CONTROL_CMD_ACCEPT, 0);
-
/* commit changes */
ret = cdns_config_update(cdns);
if (ret < 0) {
@@ -1508,11 +1494,8 @@ int sdw_cdns_clock_restart(struct sdw_cdns *cdns, bool bus_reset)
cdns_updatel(cdns, CDNS_MCP_CONTROL,
CDNS_MCP_CONTROL_BLOCK_WAKEUP, 0);
- /*
- * clear CMD_ACCEPT so that the command ignored
- * will be treated as a failure during a broadcast write
- */
- cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT, 0);
+ cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT,
+ CDNS_MCP_CONTROL_CMD_ACCEPT);
if (!bus_reset) {
diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h
index 4d1aab5b5ec2..0e7f8b35bb21 100644
--- a/drivers/soundwire/cadence_master.h
+++ b/drivers/soundwire/cadence_master.h
@@ -180,9 +180,6 @@ enum sdw_command_response
cdns_xfer_msg_defer(struct sdw_bus *bus,
struct sdw_msg *msg, struct sdw_defer *defer);
-enum sdw_command_response
-cdns_reset_page_addr(struct sdw_bus *bus, unsigned int dev_num);
-
int cdns_bus_conf(struct sdw_bus *bus, struct sdw_bus_params *params);
int cdns_set_sdw_stream(struct snd_soc_dai *dai,
diff --git a/drivers/soundwire/dmi-quirks.c b/drivers/soundwire/dmi-quirks.c
index 82061c1d9835..5db0a2443a1d 100644
--- a/drivers/soundwire/dmi-quirks.c
+++ b/drivers/soundwire/dmi-quirks.c
@@ -80,7 +80,7 @@ u64 sdw_dmi_override_adr(struct sdw_bus *bus, u64 addr)
/* check if any address remap quirk applies */
dmi_id = dmi_first_match(adr_remap_quirk_table);
if (dmi_id) {
- struct adr_remap *map = dmi_id->driver_data;
+ struct adr_remap *map;
for (map = dmi_id->driver_data; map->adr; map++) {
if (map->adr == addr) {
diff --git a/drivers/soundwire/generic_bandwidth_allocation.c b/drivers/soundwire/generic_bandwidth_allocation.c
index 84d129587084..f7c66083a4dd 100644
--- a/drivers/soundwire/generic_bandwidth_allocation.c
+++ b/drivers/soundwire/generic_bandwidth_allocation.c
@@ -382,12 +382,18 @@ static int sdw_compute_bus_params(struct sdw_bus *bus)
*/
}
- if (i == clk_values)
+ if (i == clk_values) {
+ dev_err(bus->dev, "%s: could not find clock value for bandwidth %d\n",
+ __func__, bus->params.bandwidth);
return -EINVAL;
+ }
ret = sdw_select_row_col(bus, curr_dr_freq);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(bus->dev, "%s: could not find frame configuration for bus dr_freq %d\n",
+ __func__, curr_dr_freq);
return -EINVAL;
+ }
bus->params.curr_dr_freq = curr_dr_freq;
return 0;
@@ -404,10 +410,8 @@ int sdw_compute_params(struct sdw_bus *bus)
/* Computes clock frequency, frame shape and frame frequency */
ret = sdw_compute_bus_params(bus);
- if (ret < 0) {
- dev_err(bus->dev, "Compute bus params failed: %d\n", ret);
+ if (ret < 0)
return ret;
- }
/* Compute transport and port params */
ret = sdw_compute_port_params(bus);
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index fd95f94630b1..c11e3d8cd308 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -11,7 +11,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/platform_device.h>
+#include <linux/auxiliary_bus.h>
#include <sound/pcm_params.h>
#include <linux/pm_runtime.h>
#include <sound/soc.h>
@@ -1327,11 +1327,14 @@ static int intel_init(struct sdw_intel *sdw)
}
/*
- * probe and init
+ * probe and init (aux_dev_id argument is required by function prototype but not used)
*/
-static int intel_master_probe(struct platform_device *pdev)
+static int intel_link_probe(struct auxiliary_device *auxdev,
+ const struct auxiliary_device_id *aux_dev_id)
+
{
- struct device *dev = &pdev->dev;
+ struct device *dev = &auxdev->dev;
+ struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev);
struct sdw_intel *sdw;
struct sdw_cdns *cdns;
struct sdw_bus *bus;
@@ -1344,14 +1347,14 @@ static int intel_master_probe(struct platform_device *pdev)
cdns = &sdw->cdns;
bus = &cdns->bus;
- sdw->instance = pdev->id;
- sdw->link_res = dev_get_platdata(dev);
+ sdw->instance = auxdev->id;
+ sdw->link_res = &ldev->link_res;
cdns->dev = dev;
cdns->registers = sdw->link_res->registers;
cdns->instance = sdw->instance;
cdns->msg_count = 0;
- bus->link_id = pdev->id;
+ bus->link_id = auxdev->id;
sdw_cdns_probe(cdns);
@@ -1384,10 +1387,10 @@ static int intel_master_probe(struct platform_device *pdev)
return 0;
}
-int intel_master_startup(struct platform_device *pdev)
+int intel_link_startup(struct auxiliary_device *auxdev)
{
struct sdw_cdns_stream_config config;
- struct device *dev = &pdev->dev;
+ struct device *dev = &auxdev->dev;
struct sdw_cdns *cdns = dev_get_drvdata(dev);
struct sdw_intel *sdw = cdns_to_intel(cdns);
struct sdw_bus *bus = &cdns->bus;
@@ -1524,9 +1527,9 @@ err_init:
return ret;
}
-static int intel_master_remove(struct platform_device *pdev)
+static void intel_link_remove(struct auxiliary_device *auxdev)
{
- struct device *dev = &pdev->dev;
+ struct device *dev = &auxdev->dev;
struct sdw_cdns *cdns = dev_get_drvdata(dev);
struct sdw_intel *sdw = cdns_to_intel(cdns);
struct sdw_bus *bus = &cdns->bus;
@@ -1542,19 +1545,17 @@ static int intel_master_remove(struct platform_device *pdev)
snd_soc_unregister_component(dev);
}
sdw_bus_master_delete(bus);
-
- return 0;
}
-int intel_master_process_wakeen_event(struct platform_device *pdev)
+int intel_link_process_wakeen_event(struct auxiliary_device *auxdev)
{
- struct device *dev = &pdev->dev;
+ struct device *dev = &auxdev->dev;
struct sdw_intel *sdw;
struct sdw_bus *bus;
void __iomem *shim;
u16 wake_sts;
- sdw = platform_get_drvdata(pdev);
+ sdw = dev_get_drvdata(dev);
bus = &sdw->cdns.bus;
if (bus->prop.hw_disabled) {
@@ -1976,17 +1977,22 @@ static const struct dev_pm_ops intel_pm = {
SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL)
};
-static struct platform_driver sdw_intel_drv = {
- .probe = intel_master_probe,
- .remove = intel_master_remove,
+static const struct auxiliary_device_id intel_link_id_table[] = {
+ { .name = "soundwire_intel.link" },
+ {},
+};
+MODULE_DEVICE_TABLE(auxiliary, intel_link_id_table);
+
+static struct auxiliary_driver sdw_intel_drv = {
+ .probe = intel_link_probe,
+ .remove = intel_link_remove,
.driver = {
- .name = "intel-sdw",
+ /* auxiliary_driver_register() sets .name to be the modname */
.pm = &intel_pm,
- }
+ },
+ .id_table = intel_link_id_table
};
-
-module_platform_driver(sdw_intel_drv);
+module_auxiliary_driver(sdw_intel_drv);
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_ALIAS("platform:intel-sdw");
-MODULE_DESCRIPTION("Intel Soundwire Master Driver");
+MODULE_DESCRIPTION("Intel Soundwire Link Driver");
diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h
index 06bac8ba14e9..0b47b148da3f 100644
--- a/drivers/soundwire/intel.h
+++ b/drivers/soundwire/intel.h
@@ -7,7 +7,6 @@
/**
* struct sdw_intel_link_res - Soundwire Intel link resource structure,
* typically populated by the controller driver.
- * @pdev: platform_device
* @mmio_base: mmio base of SoundWire registers
* @registers: Link IO registers base
* @shim: Audio shim pointer
@@ -23,7 +22,6 @@
* @list: used to walk-through all masters exposed by the same controller
*/
struct sdw_intel_link_res {
- struct platform_device *pdev;
void __iomem *mmio_base; /* not strictly needed, useful for debug */
void __iomem *registers;
void __iomem *shim;
@@ -48,7 +46,15 @@ struct sdw_intel {
#endif
};
-int intel_master_startup(struct platform_device *pdev);
-int intel_master_process_wakeen_event(struct platform_device *pdev);
+int intel_link_startup(struct auxiliary_device *auxdev);
+int intel_link_process_wakeen_event(struct auxiliary_device *auxdev);
+
+struct sdw_intel_link_dev {
+ struct auxiliary_device auxdev;
+ struct sdw_intel_link_res link_res;
+};
+
+#define auxiliary_dev_to_sdw_intel_link_dev(auxiliary_dev) \
+ container_of(auxiliary_dev, struct sdw_intel_link_dev, auxdev)
#endif /* __SDW_INTEL_LOCAL_H */
diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c
index 30ce95ec2d70..9e283bef53d2 100644
--- a/drivers/soundwire/intel_init.c
+++ b/drivers/soundwire/intel_init.c
@@ -12,7 +12,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/platform_device.h>
+#include <linux/auxiliary_bus.h>
#include <linux/pm_runtime.h>
#include <linux/soundwire/sdw_intel.h>
#include "cadence_master.h"
@@ -24,28 +24,108 @@
#define SDW_LINK_BASE 0x30000
#define SDW_LINK_SIZE 0x10000
+static void intel_link_dev_release(struct device *dev)
+{
+ struct auxiliary_device *auxdev = to_auxiliary_dev(dev);
+ struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev);
+
+ kfree(ldev);
+}
+
+/* alloc, init and add link devices */
+static struct sdw_intel_link_dev *intel_link_dev_register(struct sdw_intel_res *res,
+ struct sdw_intel_ctx *ctx,
+ struct fwnode_handle *fwnode,
+ const char *name,
+ int link_id)
+{
+ struct sdw_intel_link_dev *ldev;
+ struct sdw_intel_link_res *link;
+ struct auxiliary_device *auxdev;
+ int ret;
+
+ ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
+ if (!ldev)
+ return ERR_PTR(-ENOMEM);
+
+ auxdev = &ldev->auxdev;
+ auxdev->name = name;
+ auxdev->dev.parent = res->parent;
+ auxdev->dev.fwnode = fwnode;
+ auxdev->dev.release = intel_link_dev_release;
+
+ /* we don't use an IDA since we already have a link ID */
+ auxdev->id = link_id;
+
+ /*
+ * keep a handle on the allocated memory, to be used in all other functions.
+ * Since the same pattern is used to skip links that are not enabled, there is
+ * no need to check if ctx->ldev[i] is NULL later on.
+ */
+ ctx->ldev[link_id] = ldev;
+
+ /* Add link information used in the driver probe */
+ link = &ldev->link_res;
+ link->mmio_base = res->mmio_base;
+ link->registers = res->mmio_base + SDW_LINK_BASE
+ + (SDW_LINK_SIZE * link_id);
+ link->shim = res->mmio_base + SDW_SHIM_BASE;
+ link->alh = res->mmio_base + SDW_ALH_BASE;
+
+ link->ops = res->ops;
+ link->dev = res->dev;
+
+ link->clock_stop_quirks = res->clock_stop_quirks;
+ link->shim_lock = &ctx->shim_lock;
+ link->shim_mask = &ctx->shim_mask;
+ link->link_mask = ctx->link_mask;
+
+ /* now follow the two-step init/add sequence */
+ ret = auxiliary_device_init(auxdev);
+ if (ret < 0) {
+ dev_err(res->parent, "failed to initialize link dev %s link_id %d\n",
+ name, link_id);
+ kfree(ldev);
+ return ERR_PTR(ret);
+ }
+
+ ret = auxiliary_device_add(&ldev->auxdev);
+ if (ret < 0) {
+ dev_err(res->parent, "failed to add link dev %s link_id %d\n",
+ ldev->auxdev.name, link_id);
+ /* ldev will be freed with the put_device() and .release sequence */
+ auxiliary_device_uninit(&ldev->auxdev);
+ return ERR_PTR(ret);
+ }
+
+ return ldev;
+}
+
+static void intel_link_dev_unregister(struct sdw_intel_link_dev *ldev)
+{
+ auxiliary_device_delete(&ldev->auxdev);
+ auxiliary_device_uninit(&ldev->auxdev);
+}
+
static int sdw_intel_cleanup(struct sdw_intel_ctx *ctx)
{
- struct sdw_intel_link_res *link = ctx->links;
+ struct sdw_intel_link_dev *ldev;
u32 link_mask;
int i;
- if (!link)
- return 0;
-
link_mask = ctx->link_mask;
- for (i = 0; i < ctx->count; i++, link++) {
+ for (i = 0; i < ctx->count; i++) {
if (!(link_mask & BIT(i)))
continue;
- if (link->pdev) {
- pm_runtime_disable(&link->pdev->dev);
- platform_device_unregister(link->pdev);
- }
+ ldev = ctx->ldev[i];
- if (!link->clock_stop_quirks)
- pm_runtime_put_noidle(link->dev);
+ pm_runtime_disable(&ldev->auxdev.dev);
+ if (!ldev->link_res.clock_stop_quirks)
+ pm_runtime_put_noidle(ldev->link_res.dev);
+
+ intel_link_dev_unregister(ldev);
}
return 0;
@@ -91,9 +171,8 @@ EXPORT_SYMBOL_NS(sdw_intel_thread, SOUNDWIRE_INTEL_INIT);
static struct sdw_intel_ctx
*sdw_intel_probe_controller(struct sdw_intel_res *res)
{
- struct platform_device_info pdevinfo;
- struct platform_device *pdev;
struct sdw_intel_link_res *link;
+ struct sdw_intel_link_dev *ldev;
struct sdw_intel_ctx *ctx;
struct acpi_device *adev;
struct sdw_slave *slave;
@@ -116,67 +195,60 @@ static struct sdw_intel_ctx
count = res->count;
dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count);
- ctx = devm_kzalloc(&adev->dev, sizeof(*ctx), GFP_KERNEL);
+ /*
+ * we need to alloc/free memory manually and can't use devm:
+ * this routine may be called from a workqueue, and not from
+ * the parent .probe.
+ * If devm_ was used, the memory might never be freed on errors.
+ */
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return NULL;
ctx->count = count;
- ctx->links = devm_kcalloc(&adev->dev, ctx->count,
- sizeof(*ctx->links), GFP_KERNEL);
- if (!ctx->links)
+
+ /*
+ * allocate the array of pointers. The link-specific data is allocated
+ * as part of the first loop below and released with the auxiliary_device_uninit().
+ * If some links are disabled, the link pointer will remain NULL. Given that the
+ * number of links is small, this is simpler than using a list to keep track of links.
+ */
+ ctx->ldev = kcalloc(ctx->count, sizeof(*ctx->ldev), GFP_KERNEL);
+ if (!ctx->ldev) {
+ kfree(ctx);
return NULL;
+ }
- ctx->count = count;
ctx->mmio_base = res->mmio_base;
ctx->link_mask = res->link_mask;
ctx->handle = res->handle;
mutex_init(&ctx->shim_lock);
- link = ctx->links;
link_mask = ctx->link_mask;
INIT_LIST_HEAD(&ctx->link_list);
- /* Create SDW Master devices */
- for (i = 0; i < count; i++, link++) {
- if (!(link_mask & BIT(i))) {
- dev_dbg(&adev->dev,
- "Link %d masked, will not be enabled\n", i);
+ for (i = 0; i < count; i++) {
+ if (!(link_mask & BIT(i)))
continue;
- }
- link->mmio_base = res->mmio_base;
- link->registers = res->mmio_base + SDW_LINK_BASE
- + (SDW_LINK_SIZE * i);
- link->shim = res->mmio_base + SDW_SHIM_BASE;
- link->alh = res->mmio_base + SDW_ALH_BASE;
-
- link->ops = res->ops;
- link->dev = res->dev;
-
- link->clock_stop_quirks = res->clock_stop_quirks;
- link->shim_lock = &ctx->shim_lock;
- link->shim_mask = &ctx->shim_mask;
- link->link_mask = link_mask;
-
- memset(&pdevinfo, 0, sizeof(pdevinfo));
-
- pdevinfo.parent = res->parent;
- pdevinfo.name = "intel-sdw";
- pdevinfo.id = i;
- pdevinfo.fwnode = acpi_fwnode_handle(adev);
- pdevinfo.data = link;
- pdevinfo.size_data = sizeof(*link);
-
- pdev = platform_device_register_full(&pdevinfo);
- if (IS_ERR(pdev)) {
- dev_err(&adev->dev,
- "platform device creation failed: %ld\n",
- PTR_ERR(pdev));
+ /*
+ * init and add a device for each link
+ *
+ * The name of the device will be soundwire_intel.link.[i],
+ * with the "soundwire_intel" module prefix automatically added
+ * by the auxiliary bus core.
+ */
+ ldev = intel_link_dev_register(res,
+ ctx,
+ acpi_fwnode_handle(adev),
+ "link",
+ i);
+ if (IS_ERR(ldev))
goto err;
- }
- link->pdev = pdev;
- link->cdns = platform_get_drvdata(pdev);
+
+ link = &ldev->link_res;
+ link->cdns = dev_get_drvdata(&ldev->auxdev.dev);
if (!link->cdns) {
dev_err(&adev->dev, "failed to get link->cdns\n");
@@ -194,8 +266,7 @@ static struct sdw_intel_ctx
num_slaves++;
}
- ctx->ids = devm_kcalloc(&adev->dev, num_slaves,
- sizeof(*ctx->ids), GFP_KERNEL);
+ ctx->ids = kcalloc(num_slaves, sizeof(*ctx->ids), GFP_KERNEL);
if (!ctx->ids)
goto err;
@@ -213,8 +284,14 @@ static struct sdw_intel_ctx
return ctx;
err:
- ctx->count = i;
- sdw_intel_cleanup(ctx);
+ while (i--) {
+ if (!(link_mask & BIT(i)))
+ continue;
+ ldev = ctx->ldev[i];
+ intel_link_dev_unregister(ldev);
+ }
+ kfree(ctx->ldev);
+ kfree(ctx);
return NULL;
}
@@ -222,7 +299,7 @@ static int
sdw_intel_startup_controller(struct sdw_intel_ctx *ctx)
{
struct acpi_device *adev;
- struct sdw_intel_link_res *link;
+ struct sdw_intel_link_dev *ldev;
u32 caps;
u32 link_mask;
int i;
@@ -241,27 +318,28 @@ sdw_intel_startup_controller(struct sdw_intel_ctx *ctx)
return -EINVAL;
}
- if (!ctx->links)
+ if (!ctx->ldev)
return -EINVAL;
- link = ctx->links;
link_mask = ctx->link_mask;
/* Startup SDW Master devices */
- for (i = 0; i < ctx->count; i++, link++) {
+ for (i = 0; i < ctx->count; i++) {
if (!(link_mask & BIT(i)))
continue;
- intel_master_startup(link->pdev);
+ ldev = ctx->ldev[i];
+
+ intel_link_startup(&ldev->auxdev);
- if (!link->clock_stop_quirks) {
+ if (!ldev->link_res.clock_stop_quirks) {
/*
* we need to prevent the parent PCI device
* from entering pm_runtime suspend, so that
* power rails to the SoundWire IP are not
* turned off.
*/
- pm_runtime_get_noresume(link->dev);
+ pm_runtime_get_noresume(ldev->link_res.dev);
}
}
@@ -272,8 +350,8 @@ sdw_intel_startup_controller(struct sdw_intel_ctx *ctx)
* sdw_intel_probe() - SoundWire Intel probe routine
* @res: resource data
*
- * This registers a platform device for each Master handled by the controller,
- * and SoundWire Master and Slave devices will be created by the platform
+ * This registers an auxiliary device for each Master handled by the controller,
+ * and SoundWire Master and Slave devices will be created by the auxiliary
* device probe. All the information necessary is stored in the context, and
* the res argument pointer can be freed after this step.
* This function will be called after sdw_intel_acpi_scan() by SOF probe.
@@ -306,27 +384,31 @@ EXPORT_SYMBOL_NS(sdw_intel_startup, SOUNDWIRE_INTEL_INIT);
void sdw_intel_exit(struct sdw_intel_ctx *ctx)
{
sdw_intel_cleanup(ctx);
+ kfree(ctx->ids);
+ kfree(ctx->ldev);
+ kfree(ctx);
}
EXPORT_SYMBOL_NS(sdw_intel_exit, SOUNDWIRE_INTEL_INIT);
void sdw_intel_process_wakeen_event(struct sdw_intel_ctx *ctx)
{
- struct sdw_intel_link_res *link;
+ struct sdw_intel_link_dev *ldev;
u32 link_mask;
int i;
- if (!ctx->links)
+ if (!ctx->ldev)
return;
- link = ctx->links;
link_mask = ctx->link_mask;
/* Startup SDW Master devices */
- for (i = 0; i < ctx->count; i++, link++) {
+ for (i = 0; i < ctx->count; i++) {
if (!(link_mask & BIT(i)))
continue;
- intel_master_process_wakeen_event(link->pdev);
+ ldev = ctx->ldev[i];
+
+ intel_link_process_wakeen_event(&ldev->auxdev);
}
}
EXPORT_SYMBOL_NS(sdw_intel_process_wakeen_event, SOUNDWIRE_INTEL_INIT);
diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c
index 0eed38a79c6d..669d7573320b 100644
--- a/drivers/soundwire/slave.c
+++ b/drivers/soundwire/slave.c
@@ -39,12 +39,12 @@ int sdw_slave_add(struct sdw_bus *bus,
if (id->unique_id == SDW_IGNORED_UNIQUE_ID) {
/* name shall be sdw:link:mfg:part:class */
- dev_set_name(&slave->dev, "sdw:%x:%x:%x:%x",
+ dev_set_name(&slave->dev, "sdw:%01x:%04x:%04x:%02x",
bus->link_id, id->mfg_id, id->part_id,
id->class_id);
} else {
/* name shall be sdw:link:mfg:part:class:unique */
- dev_set_name(&slave->dev, "sdw:%x:%x:%x:%x:%x",
+ dev_set_name(&slave->dev, "sdw:%01x:%04x:%04x:%02x:%01x",
bus->link_id, id->mfg_id, id->part_id,
id->class_id, id->unique_id);
}
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 1eaedaaba094..1a18308f4ef4 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -422,7 +422,6 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
struct completion *port_ready;
struct sdw_dpn_prop *dpn_prop;
struct sdw_prepare_ch prep_ch;
- unsigned int time_left;
bool intr = false;
int ret = 0, val;
u32 addr;
@@ -479,15 +478,15 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
/* Wait for completion on port ready */
port_ready = &s_rt->slave->port_ready[prep_ch.num];
- time_left = wait_for_completion_timeout(port_ready,
- msecs_to_jiffies(dpn_prop->ch_prep_timeout));
+ wait_for_completion_timeout(port_ready,
+ msecs_to_jiffies(dpn_prop->ch_prep_timeout));
val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
- val &= p_rt->ch_mask;
- if (!time_left || val) {
+ if ((val < 0) || (val & p_rt->ch_mask)) {
+ ret = (val < 0) ? val : -ETIMEDOUT;
dev_err(&s_rt->slave->dev,
- "Chn prep failed for port:%d\n", prep_ch.num);
- return -ETIMEDOUT;
+ "Chn prep failed for port %d: %d\n", prep_ch.num, ret);
+ return ret;
}
}
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index 0a3a71e14df4..0c9b291ef307 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -668,7 +668,7 @@ free_port:
*
* Return: status of removal
*/
-static int vcc_remove(struct vio_dev *vdev)
+static void vcc_remove(struct vio_dev *vdev)
{
struct vcc_port *port = dev_get_drvdata(&vdev->dev);
@@ -703,8 +703,6 @@ static int vcc_remove(struct vio_dev *vdev)
kfree(port->domain);
kfree(port);
}
-
- return 0;
}
static const struct vio_device_id vcc_match[] = {
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 5531f3afeb21..2e16c5338e5b 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -18,7 +18,7 @@ config UIO_CIF
depends on PCI
help
Driver for Hilscher CIF DeviceNet and Profibus cards. This
- driver requires a userspace component called cif that handles
+ driver requires a userspace component called cif that handles
all of the heavy lifting and can be found at:
<http://www.osadl.org/projects/downloads/UIO/user/>
diff --git a/drivers/uio/uio_aec.c b/drivers/uio/uio_aec.c
index 32357f8a92b5..64eafd59e6e7 100644
--- a/drivers/uio/uio_aec.c
+++ b/drivers/uio/uio_aec.c
@@ -133,7 +133,7 @@ static void remove(struct pci_dev *pdev)
uio_unregister_device(info);
pci_release_regions(pdev);
pci_disable_device(pdev);
- iounmap(info->priv);
+ pci_iounmap(pdev, info->priv);
}
static struct pci_driver pci_driver = {
diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c
index 3bb0b0075467..e03f9b532a96 100644
--- a/drivers/uio/uio_pci_generic.c
+++ b/drivers/uio/uio_pci_generic.c
@@ -72,7 +72,9 @@ static int probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct uio_pci_generic_dev *gdev;
+ struct uio_mem *uiomem;
int err;
+ int i;
err = pcim_enable_device(pdev);
if (err) {
@@ -101,6 +103,36 @@ static int probe(struct pci_dev *pdev,
"no support for interrupts?\n");
}
+ uiomem = &gdev->info.mem[0];
+ for (i = 0; i < MAX_UIO_MAPS; ++i) {
+ struct resource *r = &pdev->resource[i];
+
+ if (r->flags != (IORESOURCE_SIZEALIGN | IORESOURCE_MEM))
+ continue;
+
+ if (uiomem >= &gdev->info.mem[MAX_UIO_MAPS]) {
+ dev_warn(
+ &pdev->dev,
+ "device has more than " __stringify(
+ MAX_UIO_MAPS) " I/O memory resources.\n");
+ break;
+ }
+
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = r->start & PAGE_MASK;
+ uiomem->offs = r->start & ~PAGE_MASK;
+ uiomem->size =
+ (uiomem->offs + resource_size(r) + PAGE_SIZE - 1) &
+ PAGE_MASK;
+ uiomem->name = r->name;
+ ++uiomem;
+ }
+
+ while (uiomem < &gdev->info.mem[MAX_UIO_MAPS]) {
+ uiomem->size = 0;
+ ++uiomem;
+ }
+
return devm_uio_register_device(&pdev->dev, &gdev->info);
}
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5e1ad0c92bfc..d33c5cd684c0 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -2209,7 +2209,6 @@ config FB_SIMPLE
config FB_SSD1307
tristate "Solomon SSD1307 framebuffer support"
depends on FB && I2C
- depends on OF
depends on GPIOLIB || COMPILE_TEST
select FB_SYS_FOPS
select FB_SYS_FILLRECT
diff --git a/drivers/virt/nitro_enclaves/ne_pci_dev.c b/drivers/virt/nitro_enclaves/ne_pci_dev.c
index b9c1de41e300..143207e9b969 100644
--- a/drivers/virt/nitro_enclaves/ne_pci_dev.c
+++ b/drivers/virt/nitro_enclaves/ne_pci_dev.c
@@ -480,6 +480,8 @@ static int ne_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto free_ne_pci_dev;
}
+ pci_set_master(pdev);
+
rc = pci_request_regions_exclusive(pdev, "nitro_enclaves");
if (rc < 0) {
dev_err(&pdev->dev, "Error in pci request regions [rc=%d]\n", rc);
diff --git a/drivers/visorbus/visorchipset.c b/drivers/visorbus/visorchipset.c
index cb1eb7e05f87..5668cad86e37 100644
--- a/drivers/visorbus/visorchipset.c
+++ b/drivers/visorbus/visorchipset.c
@@ -1561,7 +1561,7 @@ schedule_out:
static int visorchipset_init(struct acpi_device *acpi_device)
{
- int err = -ENODEV;
+ int err = -ENOMEM;
struct visorchannel *controlvm_channel;
chipset_dev = kzalloc(sizeof(*chipset_dev), GFP_KERNEL);
@@ -1584,8 +1584,10 @@ static int visorchipset_init(struct acpi_device *acpi_device)
"controlvm",
sizeof(struct visor_controlvm_channel),
VISOR_CONTROLVM_CHANNEL_VERSIONID,
- VISOR_CHANNEL_SIGNATURE))
+ VISOR_CHANNEL_SIGNATURE)) {
+ err = -ENODEV;
goto error_delete_groups;
+ }
/* if booting in a crash kernel */
if (is_kdump_kernel())
INIT_DELAYED_WORK(&chipset_dev->periodic_controlvm_work,
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index b471779c3e2c..6c962e88501c 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* ds2482.c - provides i2c to w1-master bridge(s)
* Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
*
@@ -19,7 +19,7 @@
#include <linux/w1.h>
-/**
+/*
* Allow the active pullup to be disabled, default is enabled.
*
* Note from the DS2482 datasheet:
@@ -39,7 +39,7 @@ static int extra_config;
module_param(extra_config, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
-/**
+/*
* The DS2482 registers - there are 3 registers that are addressed by a read
* pointer. The read pointer is set by the last command executed.
*
@@ -62,7 +62,7 @@ MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8
#define DS2482_PTR_CODE_CHANNEL 0xD2 /* DS2482-800 only */
#define DS2482_PTR_CODE_CONFIG 0xC3
-/**
+/*
* Configure Register bit definitions
* The top 4 bits always read 0.
* To write, the top nibble must be the 1's compl. of the low nibble.
@@ -73,7 +73,7 @@ MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8
#define DS2482_REG_CFG_APU 0x01 /* active pull-up */
-/**
+/*
* Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only).
* To set the channel, write the value at the index of the channel.
* Read and compare against the corresponding value to verify the change.
@@ -84,7 +84,7 @@ static const u8 ds2482_chan_rd[8] =
{ 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
-/**
+/*
* Status Register bit definitions (read only)
*/
#define DS2482_REG_STS_DIR 0x80
@@ -124,9 +124,9 @@ struct ds2482_data {
/**
- * Helper to calculate values for configuration register
- * @param conf the raw config value
- * @return the value w/ complements that can be written to register
+ * ds2482_calculate_config - Helper to calculate values for configuration register
+ * @conf: the raw config value
+ * Return: the value w/ complements that can be written to register
*/
static inline u8 ds2482_calculate_config(u8 conf)
{
@@ -140,10 +140,10 @@ static inline u8 ds2482_calculate_config(u8 conf)
/**
- * Sets the read pointer.
- * @param pdev The ds2482 client pointer
- * @param read_ptr see DS2482_PTR_CODE_xxx above
- * @return -1 on failure, 0 on success
+ * ds2482_select_register - Sets the read pointer.
+ * @pdev: The ds2482 client pointer
+ * @read_ptr: see DS2482_PTR_CODE_xxx above
+ * Return: -1 on failure, 0 on success
*/
static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
{
@@ -159,12 +159,12 @@ static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr)
}
/**
- * Sends a command without a parameter
- * @param pdev The ds2482 client pointer
- * @param cmd DS2482_CMD_RESET,
+ * ds2482_send_cmd - Sends a command without a parameter
+ * @pdev: The ds2482 client pointer
+ * @cmd: DS2482_CMD_RESET,
* DS2482_CMD_1WIRE_RESET,
* DS2482_CMD_1WIRE_READ_BYTE
- * @return -1 on failure, 0 on success
+ * Return: -1 on failure, 0 on success
*/
static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
{
@@ -176,14 +176,14 @@ static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd)
}
/**
- * Sends a command with a parameter
- * @param pdev The ds2482 client pointer
- * @param cmd DS2482_CMD_WRITE_CONFIG,
+ * ds2482_send_cmd_data - Sends a command with a parameter
+ * @pdev: The ds2482 client pointer
+ * @cmd: DS2482_CMD_WRITE_CONFIG,
* DS2482_CMD_1WIRE_SINGLE_BIT,
* DS2482_CMD_1WIRE_WRITE_BYTE,
* DS2482_CMD_1WIRE_TRIPLET
- * @param byte The data to send
- * @return -1 on failure, 0 on success
+ * @byte: The data to send
+ * Return: -1 on failure, 0 on success
*/
static inline int ds2482_send_cmd_data(struct ds2482_data *pdev,
u8 cmd, u8 byte)
@@ -205,10 +205,10 @@ static inline int ds2482_send_cmd_data(struct ds2482_data *pdev,
#define DS2482_WAIT_IDLE_TIMEOUT 100
/**
- * Waits until the 1-wire interface is idle (not busy)
+ * ds2482_wait_1wire_idle - Waits until the 1-wire interface is idle (not busy)
*
- * @param pdev Pointer to the device structure
- * @return the last value read from status or -1 (failure)
+ * @pdev: Pointer to the device structure
+ * Return: the last value read from status or -1 (failure)
*/
static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
{
@@ -230,12 +230,12 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev)
}
/**
- * Selects a w1 channel.
+ * ds2482_set_channel - Selects a w1 channel.
* The 1-wire interface must be idle before calling this function.
*
- * @param pdev The ds2482 client pointer
- * @param channel 0-7
- * @return -1 (failure) or 0 (success)
+ * @pdev: The ds2482 client pointer
+ * @channel: 0-7
+ * Return: -1 (failure) or 0 (success)
*/
static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel)
{
@@ -254,11 +254,11 @@ static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel)
/**
- * Performs the touch-bit function, which writes a 0 or 1 and reads the level.
+ * ds2482_w1_touch_bit - Performs the touch-bit function, which writes a 0 or 1 and reads the level.
*
- * @param data The ds2482 channel pointer
- * @param bit The level to write: 0 or non-zero
- * @return The level read: 0 or 1
+ * @data: The ds2482 channel pointer
+ * @bit: The level to write: 0 or non-zero
+ * Return: The level read: 0 or 1
*/
static u8 ds2482_w1_touch_bit(void *data, u8 bit)
{
@@ -284,13 +284,13 @@ static u8 ds2482_w1_touch_bit(void *data, u8 bit)
}
/**
- * Performs the triplet function, which reads two bits and writes a bit.
+ * ds2482_w1_triplet - Performs the triplet function, which reads two bits and writes a bit.
* The bit written is determined by the two reads:
* 00 => dbit, 01 => 0, 10 => 1
*
- * @param data The ds2482 channel pointer
- * @param dbit The direction to choose if both branches are valid
- * @return b0=read1 b1=read2 b3=bit written
+ * @data: The ds2482 channel pointer
+ * @dbit: The direction to choose if both branches are valid
+ * Return: b0=read1 b1=read2 b3=bit written
*/
static u8 ds2482_w1_triplet(void *data, u8 dbit)
{
@@ -317,10 +317,10 @@ static u8 ds2482_w1_triplet(void *data, u8 dbit)
}
/**
- * Performs the write byte function.
+ * ds2482_w1_write_byte - Performs the write byte function.
*
- * @param data The ds2482 channel pointer
- * @param byte The value to write
+ * @data: The ds2482 channel pointer
+ * @byte: The value to write
*/
static void ds2482_w1_write_byte(void *data, u8 byte)
{
@@ -341,10 +341,10 @@ static void ds2482_w1_write_byte(void *data, u8 byte)
}
/**
- * Performs the read byte function.
+ * ds2482_w1_read_byte - Performs the read byte function.
*
- * @param data The ds2482 channel pointer
- * @return The value read
+ * @data: The ds2482 channel pointer
+ * Return: The value read
*/
static u8 ds2482_w1_read_byte(void *data)
{
@@ -378,10 +378,10 @@ static u8 ds2482_w1_read_byte(void *data)
/**
- * Sends a reset on the 1-wire interface
+ * ds2482_w1_reset_bus - Sends a reset on the 1-wire interface
*
- * @param data The ds2482 channel pointer
- * @return 0=Device present, 1=No device present or error
+ * @data: The ds2482 channel pointer
+ * Return: 0=Device present, 1=No device present or error
*/
static u8 ds2482_w1_reset_bus(void *data)
{
@@ -541,7 +541,7 @@ static int ds2482_remove(struct i2c_client *client)
return 0;
}
-/**
+/*
* Driver data (common to all clients)
*/
static const struct i2c_device_id ds2482_id[] = {
diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c
index 5cfb0ae23e91..ca64f99c8f3d 100644
--- a/drivers/w1/slaves/w1_ds2438.c
+++ b/drivers/w1/slaves/w1_ds2438.c
@@ -49,6 +49,15 @@
#define DS2438_CURRENT_MSB 0x06
#define DS2438_THRESHOLD 0x07
+/* Page #1 definitions */
+#define DS2438_ETM_0 0x00
+#define DS2438_ETM_1 0x01
+#define DS2438_ETM_2 0x02
+#define DS2438_ETM_3 0x03
+#define DS2438_ICA 0x04
+#define DS2438_OFFSET_LSB 0x05
+#define DS2438_OFFSET_MSB 0x06
+
static int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf)
{
unsigned int retries = W1_DS2438_RETRIES;
@@ -62,13 +71,13 @@ static int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf)
if (w1_reset_select_slave(sl))
continue;
w1_buf[0] = W1_DS2438_RECALL_MEMORY;
- w1_buf[1] = 0x00;
+ w1_buf[1] = (u8)pageno;
w1_write_block(sl->master, w1_buf, 2);
if (w1_reset_select_slave(sl))
continue;
w1_buf[0] = W1_DS2438_READ_SCRATCH;
- w1_buf[1] = 0x00;
+ w1_buf[1] = (u8)pageno;
w1_write_block(sl->master, w1_buf, 2);
count = w1_read_block(sl->master, buf, DS2438_PAGE_SIZE + 1);
@@ -154,11 +163,11 @@ static int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value)
if ((status & mask) == value)
return 0; /* already set as requested */
- else {
- /* changing bit */
- status ^= mask;
- perform_write = 1;
- }
+
+ /* changing bit */
+ status ^= mask;
+ perform_write = 1;
+
break;
}
@@ -184,6 +193,34 @@ static int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value)
return -1;
}
+static int w1_ds2438_change_offset_register(struct w1_slave *sl, u8 *value)
+{
+ unsigned int retries = W1_DS2438_RETRIES;
+ u8 w1_buf[9];
+ u8 w1_page1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+
+ if (w1_ds2438_get_page(sl, 1, w1_page1_buf) == 0) {
+ memcpy(&w1_buf[2], w1_page1_buf, DS2438_PAGE_SIZE - 1); /* last register reserved */
+ w1_buf[7] = value[0]; /* change only offset register */
+ w1_buf[8] = value[1];
+ while (retries--) {
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_WRITE_SCRATCH;
+ w1_buf[1] = 0x01; /* write to page 1 */
+ w1_write_block(sl->master, w1_buf, 9);
+
+ if (w1_reset_select_slave(sl))
+ continue;
+ w1_buf[0] = W1_DS2438_COPY_SCRATCH;
+ w1_buf[1] = 0x01;
+ w1_write_block(sl->master, w1_buf, 2);
+ return 0;
+ }
+ }
+ return -1;
+}
+
static int w1_ds2438_get_voltage(struct w1_slave *sl,
int adc_input, uint16_t *voltage)
{
@@ -287,9 +324,9 @@ static ssize_t iad_read(struct file *filp, struct kobject *kobj,
if (!buf)
return -EINVAL;
- if (w1_ds2438_get_current(sl, &voltage) == 0) {
+ if (w1_ds2438_get_current(sl, &voltage) == 0)
ret = snprintf(buf, count, "%i\n", voltage);
- } else
+ else
ret = -EIO;
return ret;
@@ -325,6 +362,55 @@ static ssize_t page0_read(struct file *filp, struct kobject *kobj,
return ret;
}
+static ssize_t page1_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+ u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+
+ if (off != 0)
+ return 0;
+ if (!buf)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ /* Read no more than page1 size */
+ if (count > DS2438_PAGE_SIZE)
+ count = DS2438_PAGE_SIZE;
+
+ if (w1_ds2438_get_page(sl, 1, w1_buf) == 0) {
+ memcpy(buf, &w1_buf, count);
+ ret = count;
+ } else
+ ret = -EIO;
+
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
+static ssize_t offset_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ int ret;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_ds2438_change_offset_register(sl, buf) == 0)
+ ret = count;
+ else
+ ret = -EIO;
+
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return ret;
+}
+
static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
@@ -338,9 +424,9 @@ static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
if (!buf)
return -EINVAL;
- if (w1_ds2438_get_temperature(sl, &temp) == 0) {
+ if (w1_ds2438_get_temperature(sl, &temp) == 0)
ret = snprintf(buf, count, "%i\n", temp);
- } else
+ else
ret = -EIO;
return ret;
@@ -359,9 +445,9 @@ static ssize_t vad_read(struct file *filp, struct kobject *kobj,
if (!buf)
return -EINVAL;
- if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) {
+ if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0)
ret = snprintf(buf, count, "%u\n", voltage);
- } else
+ else
ret = -EIO;
return ret;
@@ -380,16 +466,18 @@ static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
if (!buf)
return -EINVAL;
- if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) {
+ if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0)
ret = snprintf(buf, count, "%u\n", voltage);
- } else
+ else
ret = -EIO;
return ret;
}
-static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, iad_read, iad_write, 0);
+static BIN_ATTR_RW(iad, 0);
static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE);
+static BIN_ATTR_RO(page1, DS2438_PAGE_SIZE);
+static BIN_ATTR_WO(offset, 2);
static BIN_ATTR_RO(temperature, 0/* real length varies */);
static BIN_ATTR_RO(vad, 0/* real length varies */);
static BIN_ATTR_RO(vdd, 0/* real length varies */);
@@ -397,6 +485,8 @@ static BIN_ATTR_RO(vdd, 0/* real length varies */);
static struct bin_attribute *w1_ds2438_bin_attrs[] = {
&bin_attr_iad,
&bin_attr_page0,
+ &bin_attr_page1,
+ &bin_attr_offset,
&bin_attr_temperature,
&bin_attr_vad,
&bin_attr_vdd,
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 9d08a1c9c445..ca70c5f03206 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -834,7 +834,7 @@ static int check_family_data(struct w1_slave *sl)
}
/**
- * support_bulk_read() - check if slave support bulk read
+ * bulk_read_support() - check if slave support bulk read
* @sl: device to check the ability
*
* Return: true if bulk read is supported, false if not or error
@@ -2056,7 +2056,6 @@ static ssize_t w1_seq_show(struct device *device,
{
struct w1_slave *sl = dev_to_w1_slave(device);
ssize_t c = PAGE_SIZE;
- int rv;
int i;
u8 ack;
u64 rn;
@@ -2084,7 +2083,7 @@ static ssize_t w1_seq_show(struct device *device,
goto error;
w1_write_8(sl->master, W1_42_COND_READ);
- rv = w1_read_block(sl->master, (u8 *)&rn, 8);
+ w1_read_block(sl->master, (u8 *)&rn, 8);
reg_num = (struct w1_reg_num *) &rn;
if (reg_num->family == W1_42_FINISHED_BYTE)
break;
diff --git a/drivers/watchdog/mei_wdt.c b/drivers/watchdog/mei_wdt.c
index e023d7d90d66..c8ac36135e28 100644
--- a/drivers/watchdog/mei_wdt.c
+++ b/drivers/watchdog/mei_wdt.c
@@ -121,7 +121,7 @@ struct mei_mc_hdr {
};
/**
- * struct mei_wdt_start_request watchdog start/ping
+ * struct mei_wdt_start_request - watchdog start/ping
*
* @hdr: Management Control Command Header
* @timeout: timeout value
@@ -134,7 +134,7 @@ struct mei_wdt_start_request {
} __packed;
/**
- * struct mei_wdt_start_response watchdog start/ping response
+ * struct mei_wdt_start_response - watchdog start/ping response
*
* @hdr: Management Control Command Header
* @status: operation status
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 7e83c3e71504..0c424a0cadaa 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1609,7 +1609,7 @@ static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg)
* Does not take i_mutex for the write and thus is not for general purpose
* use.
*/
-ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
+static ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct inode *bd_inode = bdev_file_inode(file);
@@ -1647,9 +1647,8 @@ ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
blk_finish_plug(&plug);
return ret;
}
-EXPORT_SYMBOL_GPL(blkdev_write_iter);
-ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
+static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct file *file = iocb->ki_filp;
struct inode *bd_inode = bdev_file_inode(file);
@@ -1671,7 +1670,6 @@ ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
iov_iter_reexpand(to, iov_iter_count(to) + shorted);
return ret;
}
-EXPORT_SYMBOL_GPL(blkdev_read_iter);
static int blkdev_writepages(struct address_space *mapping,
struct writeback_control *wbc)
diff --git a/include/dt-bindings/interconnect/qcom,sc7280.h b/include/dt-bindings/interconnect/qcom,sc7280.h
new file mode 100644
index 000000000000..21b000443999
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,sc7280.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Qualcomm SC7280 interconnect IDs
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SC7280_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_SC7280_H
+
+#define MASTER_QSPI_0 0
+#define MASTER_QUP_0 1
+#define MASTER_QUP_1 2
+#define MASTER_A1NOC_CFG 3
+#define MASTER_PCIE_0 4
+#define MASTER_PCIE_1 5
+#define MASTER_SDCC_1 6
+#define MASTER_SDCC_2 7
+#define MASTER_SDCC_4 8
+#define MASTER_UFS_MEM 9
+#define MASTER_USB2 10
+#define MASTER_USB3_0 11
+#define SLAVE_A1NOC_SNOC 12
+#define SLAVE_ANOC_PCIE_GEM_NOC 13
+#define SLAVE_SERVICE_A1NOC 14
+
+#define MASTER_QDSS_BAM 0
+#define MASTER_A2NOC_CFG 1
+#define MASTER_CNOC_A2NOC 2
+#define MASTER_CRYPTO 3
+#define MASTER_IPA 4
+#define MASTER_QDSS_ETR 5
+#define SLAVE_A2NOC_SNOC 6
+#define SLAVE_SERVICE_A2NOC 7
+
+#define MASTER_QUP_CORE_0 0
+#define MASTER_QUP_CORE_1 1
+#define SLAVE_QUP_CORE_0 2
+#define SLAVE_QUP_CORE_1 3
+
+#define MASTER_CNOC3_CNOC2 0
+#define MASTER_QDSS_DAP 1
+#define SLAVE_AHB2PHY_SOUTH 2
+#define SLAVE_AHB2PHY_NORTH 3
+#define SLAVE_CAMERA_CFG 4
+#define SLAVE_CLK_CTL 5
+#define SLAVE_CDSP_CFG 6
+#define SLAVE_RBCPR_CX_CFG 7
+#define SLAVE_RBCPR_MX_CFG 8
+#define SLAVE_CRYPTO_0_CFG 9
+#define SLAVE_CX_RDPM 10
+#define SLAVE_DCC_CFG 11
+#define SLAVE_DISPLAY_CFG 12
+#define SLAVE_GFX3D_CFG 13
+#define SLAVE_HWKM 14
+#define SLAVE_IMEM_CFG 15
+#define SLAVE_IPA_CFG 16
+#define SLAVE_IPC_ROUTER_CFG 17
+#define SLAVE_LPASS 18
+#define SLAVE_CNOC_MSS 19
+#define SLAVE_MX_RDPM 20
+#define SLAVE_PCIE_0_CFG 21
+#define SLAVE_PCIE_1_CFG 22
+#define SLAVE_PDM 23
+#define SLAVE_PIMEM_CFG 24
+#define SLAVE_PKA_WRAPPER_CFG 25
+#define SLAVE_PMU_WRAPPER_CFG 26
+#define SLAVE_QDSS_CFG 27
+#define SLAVE_QSPI_0 28
+#define SLAVE_QUP_0 29
+#define SLAVE_QUP_1 30
+#define SLAVE_SDCC_1 31
+#define SLAVE_SDCC_2 32
+#define SLAVE_SDCC_4 33
+#define SLAVE_SECURITY 34
+#define SLAVE_TCSR 35
+#define SLAVE_TLMM 36
+#define SLAVE_UFS_MEM_CFG 37
+#define SLAVE_USB2 38
+#define SLAVE_USB3_0 39
+#define SLAVE_VENUS_CFG 40
+#define SLAVE_VSENSE_CTRL_CFG 41
+#define SLAVE_A1NOC_CFG 42
+#define SLAVE_A2NOC_CFG 43
+#define SLAVE_CNOC2_CNOC3 44
+#define SLAVE_CNOC_MNOC_CFG 45
+#define SLAVE_SNOC_CFG 46
+
+#define MASTER_CNOC2_CNOC3 0
+#define MASTER_GEM_NOC_CNOC 1
+#define MASTER_GEM_NOC_PCIE_SNOC 2
+#define SLAVE_AOSS 3
+#define SLAVE_APPSS 4
+#define SLAVE_CNOC3_CNOC2 5
+#define SLAVE_CNOC_A2NOC 6
+#define SLAVE_DDRSS_CFG 7
+#define SLAVE_BOOT_IMEM 8
+#define SLAVE_IMEM 9
+#define SLAVE_PIMEM 10
+#define SLAVE_PCIE_0 11
+#define SLAVE_PCIE_1 12
+#define SLAVE_QDSS_STM 13
+#define SLAVE_TCU 14
+
+#define MASTER_CNOC_DC_NOC 0
+#define SLAVE_LLCC_CFG 1
+#define SLAVE_GEM_NOC_CFG 2
+
+#define MASTER_GPU_TCU 0
+#define MASTER_SYS_TCU 1
+#define MASTER_APPSS_PROC 2
+#define MASTER_COMPUTE_NOC 3
+#define MASTER_GEM_NOC_CFG 4
+#define MASTER_GFX3D 5
+#define MASTER_MNOC_HF_MEM_NOC 6
+#define MASTER_MNOC_SF_MEM_NOC 7
+#define MASTER_ANOC_PCIE_GEM_NOC 8
+#define MASTER_SNOC_GC_MEM_NOC 9
+#define MASTER_SNOC_SF_MEM_NOC 10
+#define SLAVE_MSS_PROC_MS_MPU_CFG 11
+#define SLAVE_MCDMA_MS_MPU_CFG 12
+#define SLAVE_GEM_NOC_CNOC 13
+#define SLAVE_LLCC 14
+#define SLAVE_MEM_NOC_PCIE_SNOC 15
+#define SLAVE_SERVICE_GEM_NOC_1 16
+#define SLAVE_SERVICE_GEM_NOC_2 17
+#define SLAVE_SERVICE_GEM_NOC 18
+
+#define MASTER_CNOC_LPASS_AG_NOC 0
+#define SLAVE_LPASS_CORE_CFG 1
+#define SLAVE_LPASS_LPI_CFG 2
+#define SLAVE_LPASS_MPU_CFG 3
+#define SLAVE_LPASS_TOP_CFG 4
+#define SLAVE_SERVICES_LPASS_AML_NOC 5
+#define SLAVE_SERVICE_LPASS_AG_NOC 6
+
+#define MASTER_LLCC 0
+#define SLAVE_EBI1 1
+
+#define MASTER_CNOC_MNOC_CFG 0
+#define MASTER_VIDEO_P0 1
+#define MASTER_VIDEO_PROC 2
+#define MASTER_CAMNOC_HF 3
+#define MASTER_CAMNOC_ICP 4
+#define MASTER_CAMNOC_SF 5
+#define MASTER_MDP0 6
+#define SLAVE_MNOC_HF_MEM_NOC 7
+#define SLAVE_MNOC_SF_MEM_NOC 8
+#define SLAVE_SERVICE_MNOC 9
+
+#define MASTER_CDSP_NOC_CFG 0
+#define MASTER_CDSP_PROC 1
+#define SLAVE_CDSP_MEM_NOC 2
+#define SLAVE_SERVICE_NSP_NOC 3
+
+#define MASTER_A1NOC_SNOC 0
+#define MASTER_A2NOC_SNOC 1
+#define MASTER_SNOC_CFG 2
+#define MASTER_PIMEM 3
+#define MASTER_GIC 4
+#define SLAVE_SNOC_GEM_NOC_GC 5
+#define SLAVE_SNOC_GEM_NOC_SF 6
+#define SLAVE_SERVICE_SNOC 7
+
+#endif
diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
index 99580c22f91a..34c2175e6a1e 100644
--- a/include/linux/eeprom_93xx46.h
+++ b/include/linux/eeprom_93xx46.h
@@ -10,6 +10,9 @@ struct eeprom_93xx46_platform_data {
#define EE_ADDR8 0x01 /* 8 bit addr. cfg */
#define EE_ADDR16 0x02 /* 16 bit addr. cfg */
#define EE_READONLY 0x08 /* forbid writing */
+#define EE_SIZE1K 0x10 /* 1 kb of data, that is a 93xx46 */
+#define EE_SIZE2K 0x20 /* 2 kb of data, that is a 93xx56 */
+#define EE_SIZE4K 0x40 /* 4 kb of data, that is a 93xx66 */
unsigned int quirks;
/* Single word read transfers only; no sequential read. */
diff --git a/include/linux/fpga/altera-pr-ip-core.h b/include/linux/fpga/altera-pr-ip-core.h
index 0b08ac20ab16..a6b4c07858cc 100644
--- a/include/linux/fpga/altera-pr-ip-core.h
+++ b/include/linux/fpga/altera-pr-ip-core.h
@@ -13,6 +13,5 @@
#include <linux/io.h>
int alt_pr_register(struct device *dev, void __iomem *reg_base);
-void alt_pr_unregister(struct device *dev);
#endif /* _ALT_PR_IP_CORE_H */
diff --git a/include/linux/fpga/fpga-bridge.h b/include/linux/fpga/fpga-bridge.h
index 817600a32c93..6c3c28806ff1 100644
--- a/include/linux/fpga/fpga-bridge.h
+++ b/include/linux/fpga/fpga-bridge.h
@@ -11,7 +11,7 @@ struct fpga_bridge;
/**
* struct fpga_bridge_ops - ops for low level FPGA bridge drivers
* @enable_show: returns the FPGA bridge's status
- * @enable_set: set a FPGA bridge as enabled or disabled
+ * @enable_set: set an FPGA bridge as enabled or disabled
* @fpga_bridge_remove: set FPGA into a specific state during driver remove
* @groups: optional attribute groups.
*/
diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index 2bc3030a69e5..ec2cd8bfceb0 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -75,7 +75,7 @@ enum fpga_mgr_states {
#define FPGA_MGR_COMPRESSED_BITSTREAM BIT(4)
/**
- * struct fpga_image_info - information specific to a FPGA image
+ * struct fpga_image_info - information specific to an FPGA image
* @flags: boolean flags as defined above
* @enable_timeout_us: maximum time to enable traffic through bridge (uSec)
* @disable_timeout_us: maximum time to disable traffic through bridge (uSec)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index bb40ac8608a7..640574294216 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3247,11 +3247,8 @@ ssize_t vfs_iocb_iter_write(struct file *file, struct kiocb *iocb,
struct iov_iter *iter);
/* fs/block_dev.c */
-extern ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to);
-extern ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from);
extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
int datasync);
-extern void block_sync_page(struct page *page);
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
diff --git a/include/linux/mcb.h b/include/linux/mcb.h
index 71dd10a3d928..f6efb16f9d1b 100644
--- a/include/linux/mcb.h
+++ b/include/linux/mcb.h
@@ -120,7 +120,7 @@ extern int __must_check __mcb_register_driver(struct mcb_driver *drv,
__mcb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
extern void mcb_unregister_driver(struct mcb_driver *driver);
#define module_mcb_driver(__mcb_driver) \
- module_driver(__mcb_driver, mcb_register_driver, mcb_unregister_driver);
+ module_driver(__mcb_driver, mcb_register_driver, mcb_unregister_driver)
extern void mcb_bus_add_devices(const struct mcb_bus *bus);
extern int mcb_device_register(struct mcb_bus *bus, struct mcb_device *dev);
extern struct mcb_bus *mcb_alloc_bus(struct device *carrier);
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 471cb7b9e896..104505e9028f 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -25,6 +25,7 @@ enum nvmem_type {
NVMEM_TYPE_EEPROM,
NVMEM_TYPE_OTP,
NVMEM_TYPE_BATTERY_BACKED,
+ NVMEM_TYPE_FRAM,
};
#define NVMEM_DEVID_NONE (-1)
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 0ed434d02196..f3286f4cd306 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -125,7 +125,7 @@ struct phy_ops {
/**
* struct phy_attrs - represents phy attributes
* @bus_width: Data path width implemented by PHY
- * @max_link_rate: Maximum link rate supported by PHY (in Mbps)
+ * @max_link_rate: Maximum link rate supported by PHY (units to be decided by producer and consumer)
* @mode: PHY mode
*/
struct phy_attrs {
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index de9802a24e7e..a48ac3e77301 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -612,6 +612,7 @@ struct sdw_bus_params {
* @update_status: Update Slave status
* @bus_config: Update the bus config for Slave
* @port_prep: Prepare the port with parameters
+ * @clk_stop: handle imp-def sequences before and after prepare and de-prepare
*/
struct sdw_slave_ops {
int (*read_prop)(struct sdw_slave *sdw);
@@ -624,7 +625,6 @@ struct sdw_slave_ops {
int (*port_prep)(struct sdw_slave *slave,
struct sdw_prepare_ch *prepare_ch,
enum sdw_port_prep_ops pre_ops);
- int (*get_clk_stop_mode)(struct sdw_slave *slave);
int (*clk_stop)(struct sdw_slave *slave,
enum sdw_clk_stop_mode mode,
enum sdw_clk_stop_type type);
@@ -675,7 +675,6 @@ struct sdw_slave {
struct list_head node;
struct completion port_ready[SDW_MAX_PORTS];
unsigned int m_port_map[SDW_MAX_PORTS];
- enum sdw_clk_stop_mode curr_clk_stop_mode;
u16 dev_num;
u16 dev_num_sticky;
bool probed;
@@ -1040,7 +1039,7 @@ int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
int sdw_read_no_pm(struct sdw_slave *slave, u32 addr);
int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
-int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h
index 3a5446ac014a..1ebea7764011 100644
--- a/include/linux/soundwire/sdw_intel.h
+++ b/include/linux/soundwire/sdw_intel.h
@@ -58,7 +58,7 @@ struct sdw_intel_acpi_info {
u32 link_mask;
};
-struct sdw_intel_link_res;
+struct sdw_intel_link_dev;
/* Intel clock-stop/pm_runtime quirk definitions */
@@ -109,7 +109,7 @@ struct sdw_intel_slave_id {
* Controller
* @num_slaves: total number of devices exposed across all enabled links
* @handle: ACPI parent handle
- * @links: information for each link (controller-specific and kept
+ * @ldev: information for each link (controller-specific and kept
* opaque here)
* @ids: array of slave_id, representing Slaves exposed across all enabled
* links
@@ -123,7 +123,7 @@ struct sdw_intel_ctx {
u32 link_mask;
int num_slaves;
acpi_handle handle;
- struct sdw_intel_link_res *links;
+ struct sdw_intel_link_dev **ldev;
struct sdw_intel_slave_id *ids;
struct list_head link_list;
struct mutex shim_lock; /* lock for access to shared SHIM registers */
diff --git a/include/linux/stm.h b/include/linux/stm.h
index c6f577ab6f21..3b22689512be 100644
--- a/include/linux/stm.h
+++ b/include/linux/stm.h
@@ -57,7 +57,7 @@ struct stm_device;
*
* Normally, an STM device will have a range of masters available to software
* and the rest being statically assigned to various hardware trace sources.
- * The former is defined by the the range [@sw_start..@sw_end] of the device
+ * The former is defined by the range [@sw_start..@sw_end] of the device
* description. That is, the lowest master that can be allocated to software
* writers is @sw_start and data from this writer will appear is @sw_start
* master in the STP stream.
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index d76a1ddf83a3..a12556a4b93a 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -162,6 +162,12 @@ static const struct attribute_group _name##_group = { \
}; \
__ATTRIBUTE_GROUPS(_name)
+#define BIN_ATTRIBUTE_GROUPS(_name) \
+static const struct attribute_group _name##_group = { \
+ .bin_attrs = _name##_attrs, \
+}; \
+__ATTRIBUTE_GROUPS(_name)
+
struct file;
struct vm_area_struct;
struct address_space;
diff --git a/include/uapi/linux/raw.h b/include/uapi/linux/raw.h
deleted file mode 100644
index 47874919d0b9..000000000000
--- a/include/uapi/linux/raw.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __LINUX_RAW_H
-#define __LINUX_RAW_H
-
-#include <linux/types.h>
-
-#define RAW_SETBIND _IO( 0xac, 0 )
-#define RAW_GETBIND _IO( 0xac, 1 )
-
-struct raw_config_request
-{
- int raw_minor;
- __u64 block_major;
- __u64 block_minor;
-};
-
-#endif /* __LINUX_RAW_H */
diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h
index 6d2d34c9f375..a47a731e4527 100644
--- a/include/uapi/misc/habanalabs.h
+++ b/include/uapi/misc/habanalabs.h
@@ -313,6 +313,7 @@ enum hl_device_status {
* HL_INFO_SYNC_MANAGER - Retrieve sync manager info per dcore
* HL_INFO_TOTAL_ENERGY - Retrieve total energy consumption
* HL_INFO_PLL_FREQUENCY - Retrieve PLL frequency
+ * HL_INFO_OPEN_STATS - Retrieve info regarding recent device open calls
*/
#define HL_INFO_HW_IP_INFO 0
#define HL_INFO_HW_EVENTS 1
@@ -331,6 +332,7 @@ enum hl_device_status {
#define HL_INFO_TOTAL_ENERGY 15
#define HL_INFO_PLL_FREQUENCY 16
#define HL_INFO_POWER 17
+#define HL_INFO_OPEN_STATS 18
#define HL_INFO_VERSION_MAX_LEN 128
#define HL_INFO_CARD_NAME_MAX_LEN 16
@@ -445,6 +447,16 @@ struct hl_pll_frequency_info {
};
/**
+ * struct hl_open_stats_info - device open statistics information
+ * @open_counter: ever growing counter, increased on each successful dev open
+ * @last_open_period_ms: duration (ms) device was open last time
+ */
+struct hl_open_stats_info {
+ __u64 open_counter;
+ __u64 last_open_period_ms;
+};
+
+/**
* struct hl_power_info - power information
* @power: power consumption
*/
@@ -664,6 +676,7 @@ struct hl_cs_chunk {
#define HL_CS_FLAGS_STAGED_SUBMISSION_FIRST 0x80
#define HL_CS_FLAGS_STAGED_SUBMISSION_LAST 0x100
#define HL_CS_FLAGS_CUSTOM_TIMEOUT 0x200
+#define HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT 0x400
#define HL_CS_STATUS_SUCCESS 0
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 641767b0dce2..d3ce78298832 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -1117,9 +1117,9 @@ static int __init dynamic_debug_init(void)
goto out_err;
ddebug_init_success = 1;
- vpr_info("%d modules, %d entries and %d bytes in ddebug tables, %d bytes in __dyndbg section\n",
- modct, entries, (int)(modct * sizeof(struct ddebug_table)),
- (int)(entries * sizeof(struct _ddebug)));
+ vpr_info("%d prdebugs in %d modules, %d KiB in ddebug tables, %d kiB in __dyndbg section\n",
+ entries, modct, (int)((modct * sizeof(struct ddebug_table)) >> 10),
+ (int)((entries * sizeof(struct _ddebug)) >> 10));
/* apply ddebug_query boot param, dont unload tables on err */
if (ddebug_setup_string[0] != '\0') {
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index e9118234b30e..1a867c73a48e 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -600,13 +600,13 @@ static int create_codec_dai_name(struct device *dev,
comp_index = i + offset;
if (is_unique_device(link, sdw_version, mfg_id, part_id,
class_id, i)) {
- codec_str = "sdw:%x:%x:%x:%x";
+ codec_str = "sdw:%01x:%04x:%04x:%02x";
codec[comp_index].name =
devm_kasprintf(dev, GFP_KERNEL, codec_str,
link_id, mfg_id, part_id,
class_id);
} else {
- codec_str = "sdw:%x:%x:%x:%x:%x";
+ codec_str = "sdw:%01x:%04x:%04x:%02x:%01x";
codec[comp_index].name =
devm_kasprintf(dev, GFP_KERNEL, codec_str,
link_id, mfg_id, part_id,
diff --git a/tools/testing/selftests/lkdtm/config b/tools/testing/selftests/lkdtm/config
index d874990e442b..013446e87f1f 100644
--- a/tools/testing/selftests/lkdtm/config
+++ b/tools/testing/selftests/lkdtm/config
@@ -1 +1,8 @@
CONFIG_LKDTM=y
+CONFIG_DEBUG_LIST=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
+CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
+CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
diff --git a/tools/testing/selftests/lkdtm/run.sh b/tools/testing/selftests/lkdtm/run.sh
index bb7a1775307b..e95e79bd3126 100755
--- a/tools/testing/selftests/lkdtm/run.sh
+++ b/tools/testing/selftests/lkdtm/run.sh
@@ -76,10 +76,14 @@ fi
# Save existing dmesg so we can detect new content below
dmesg > "$DMESG"
-# Most shells yell about signals and we're expecting the "cat" process
-# to usually be killed by the kernel. So we have to run it in a sub-shell
-# and silence errors.
-($SHELL -c 'cat <(echo '"$test"') >'"$TRIGGER" 2>/dev/null) || true
+# Since the kernel is likely killing the process writing to the trigger
+# file, it must not be the script's shell itself. i.e. we cannot do:
+# echo "$test" >"$TRIGGER"
+# Instead, use "cat" to take the signal. Since the shell will yell about
+# the signal that killed the subprocess, we must ignore the failure and
+# continue. However we don't silence stderr since there might be other
+# useful details reported there in the case of other unexpected conditions.
+echo "$test" | cat >"$TRIGGER" || true
# Record and dump the results
dmesg | comm --nocheck-order -13 "$DMESG" - > "$LOG" || true
diff --git a/tools/testing/selftests/lkdtm/stack-entropy.sh b/tools/testing/selftests/lkdtm/stack-entropy.sh
index b1b8a5097cbb..1b4d95d575f8 100755
--- a/tools/testing/selftests/lkdtm/stack-entropy.sh
+++ b/tools/testing/selftests/lkdtm/stack-entropy.sh
@@ -30,6 +30,7 @@ rm -f "$log"
# We would expect any functional stack randomization to be at least 5 bits.
if [ "$bits" -lt 5 ]; then
+ echo "Stack entropy is low! Booted without 'randomize_kstack_offset=y'?"
exit 1
else
exit 0
diff --git a/tools/testing/selftests/lkdtm/tests.txt b/tools/testing/selftests/lkdtm/tests.txt
index 11ef159be0fd..846cfd508d3c 100644
--- a/tools/testing/selftests/lkdtm/tests.txt
+++ b/tools/testing/selftests/lkdtm/tests.txt
@@ -11,15 +11,18 @@ CORRUPT_LIST_ADD list_add corruption
CORRUPT_LIST_DEL list_del corruption
STACK_GUARD_PAGE_LEADING
STACK_GUARD_PAGE_TRAILING
-UNSET_SMEP CR4 bits went missing
+UNSET_SMEP pinned CR4 bits changed:
DOUBLE_FAULT
CORRUPT_PAC
UNALIGNED_LOAD_STORE_WRITE
-#OVERWRITE_ALLOCATION Corrupts memory on failure
+SLAB_LINEAR_OVERFLOW
+VMALLOC_LINEAR_OVERFLOW
#WRITE_AFTER_FREE Corrupts memory on failure
-READ_AFTER_FREE
+READ_AFTER_FREE call trace:|Memory correctly poisoned
#WRITE_BUDDY_AFTER_FREE Corrupts memory on failure
-READ_BUDDY_AFTER_FREE
+READ_BUDDY_AFTER_FREE call trace:|Memory correctly poisoned
+SLAB_INIT_ON_ALLOC Memory appears initialized
+BUDDY_INIT_ON_ALLOC Memory appears initialized
SLAB_FREE_DOUBLE
SLAB_FREE_CROSS
SLAB_FREE_PAGE