summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-14 08:05:31 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-14 08:05:31 +0300
commitfb0255fb2941ef6f21742b2bc146d6b9aef4fedc (patch)
tree8334f3485152b1c887ddfe04ba9a95c8a704481c
parent449fcf3ab0baf3dde9952385e6789f2ca10c3980 (diff)
parent57f5d648c45c3d40a3257c06629c14fd53c383bc (diff)
downloadlinux-fb0255fb2941ef6f21742b2bc146d6b9aef4fedc.tar.xz
Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver pull request for 4.15-rc1. Lots of serial driver updates in here, some small vt cleanups, and a raft of SPDX and license boilerplate cleanups, messing up the diffstat a bit. Nothing major, with no realy functional changes except better hardware support for some platforms. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits) tty: ehv_bytechan: fix spelling mistake tty: serial: meson: allow baud-rates lower than 9600 serial: 8250_fintek: Fix crash with baud rate B0 serial: 8250_fintek: Disable delays for ports != 0 serial: 8250_fintek: Return -EINVAL on invalid configuration tty: Remove redundant license text tty: serdev: Remove redundant license text tty: hvc: Remove redundant license text tty: serial: Remove redundant license text tty: add SPDX identifiers to all remaining files in drivers/tty/ tty: serial: jsm: remove redundant pointer ts tty: serial: jsm: add space before the open parenthesis '(' tty: serial: jsm: fix coding style tty: serial: jsm: delete space between function name and '(' tty: serial: jsm: add blank line after declarations tty: serial: jsm: change the type of local variable tty: serial: imx: remove dead code imx_dma_rxint tty: serial: imx: disable ageing timer interrupt if dma in use serial: 8250: fix potential deadlock in rs485-mode serial: m32r_sio: Drop redundant .data assignment ...
-rw-r--r--Documentation/devicetree/bindings/dma/stm32-dma.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/atmel-usart.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-imx-uart.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-lpuart.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/st,stm32-usart.txt10
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi12
-rw-r--r--arch/arm/boot/dts/stm32f746.dtsi12
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi4
-rw-r--r--drivers/acpi/scan.c37
-rw-r--r--drivers/tty/amiserial.c1
-rw-r--r--drivers/tty/bfin_jtag_comm.c3
-rw-r--r--drivers/tty/cyclades.c17
-rw-r--r--drivers/tty/ehv_bytechan.c9
-rw-r--r--drivers/tty/goldfish.c11
-rw-r--r--drivers/tty/hvc/hvc_bfin_jtag.c3
-rw-r--r--drivers/tty/hvc/hvc_console.c15
-rw-r--r--drivers/tty/hvc/hvc_console.h15
-rw-r--r--drivers/tty/hvc/hvc_dcc.c13
-rw-r--r--drivers/tty/hvc/hvc_opal.c16
-rw-r--r--drivers/tty/hvc/hvc_rtas.c15
-rw-r--r--drivers/tty/hvc/hvc_tile.c11
-rw-r--r--drivers/tty/hvc/hvc_udbg.c15
-rw-r--r--drivers/tty/hvc/hvc_vio.c15
-rw-r--r--drivers/tty/hvc/hvc_xen.c15
-rw-r--r--drivers/tty/hvc/hvcs.c15
-rw-r--r--drivers/tty/hvc/hvsi.c15
-rw-r--r--drivers/tty/ipwireless/main.c1
-rw-r--r--drivers/tty/isicom.c6
-rw-r--r--drivers/tty/metag_da.c16
-rw-r--r--drivers/tty/mips_ejtag_fdc.c13
-rw-r--r--drivers/tty/moxa.c6
-rw-r--r--drivers/tty/mxser.c22
-rw-r--r--drivers/tty/n_gsm.c18
-rw-r--r--drivers/tty/n_hdlc.c3
-rw-r--r--drivers/tty/n_null.c14
-rw-r--r--drivers/tty/n_r3964.c4
-rw-r--r--drivers/tty/n_tracerouter.c12
-rw-r--r--drivers/tty/n_tracesink.c12
-rw-r--r--drivers/tty/n_tracesink.h12
-rw-r--r--drivers/tty/n_tty.c4
-rw-r--r--drivers/tty/nozomi.c15
-rw-r--r--drivers/tty/rocket.c15
-rw-r--r--drivers/tty/serdev/Kconfig8
-rw-r--r--drivers/tty/serdev/core.c152
-rw-r--r--drivers/tty/serdev/serdev-ttyport.c31
-rw-r--r--drivers/tty/serial/21285.c1
-rw-r--r--drivers/tty/serial/8250/8250.h6
-rw-r--r--drivers/tty/serial/8250/8250_accent.c5
-rw-r--r--drivers/tty/serial/8250/8250_acorn.c5
-rw-r--r--drivers/tty/serial/8250/8250_aspeed_vuart.c6
-rw-r--r--drivers/tty/serial/8250/8250_bcm2835aux.c6
-rw-r--r--drivers/tty/serial/8250/8250_boca.c5
-rw-r--r--drivers/tty/serial/8250/8250_core.c23
-rw-r--r--drivers/tty/serial/8250/8250_dma.c6
-rw-r--r--drivers/tty/serial/8250/8250_dw.c36
-rw-r--r--drivers/tty/serial/8250/8250_early.c5
-rw-r--r--drivers/tty/serial/8250/8250_em.c14
-rw-r--r--drivers/tty/serial/8250/8250_exar.c5
-rw-r--r--drivers/tty/serial/8250/8250_exar_st16c554.c5
-rw-r--r--drivers/tty/serial/8250/8250_fintek.c123
-rw-r--r--drivers/tty/serial/8250/8250_fourport.c5
-rw-r--r--drivers/tty/serial/8250/8250_fsl.c5
-rw-r--r--drivers/tty/serial/8250/8250_gsc.c6
-rw-r--r--drivers/tty/serial/8250/8250_hp300.c1
-rw-r--r--drivers/tty/serial/8250/8250_hub6.c5
-rw-r--r--drivers/tty/serial/8250/8250_ingenic.c10
-rw-r--r--drivers/tty/serial/8250/8250_lpc18xx.c6
-rw-r--r--drivers/tty/serial/8250/8250_lpss.c5
-rw-r--r--drivers/tty/serial/8250/8250_mid.c11
-rw-r--r--drivers/tty/serial/8250/8250_moxa.c5
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c13
-rw-r--r--drivers/tty/serial/8250/8250_of.c7
-rw-r--r--drivers/tty/serial/8250/8250_omap.c5
-rw-r--r--drivers/tty/serial/8250/8250_pci.c6
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c5
-rw-r--r--drivers/tty/serial/8250/8250_port.c16
-rw-r--r--drivers/tty/serial/8250/8250_pxa.c7
-rw-r--r--drivers/tty/serial/8250/8250_uniphier.c11
-rw-r--r--drivers/tty/serial/8250/serial_cs.c1
-rw-r--r--drivers/tty/serial/altera_jtaguart.c6
-rw-r--r--drivers/tty/serial/altera_uart.c14
-rw-r--r--drivers/tty/serial/amba-pl010.c15
-rw-r--r--drivers/tty/serial/amba-pl011.c32
-rw-r--r--drivers/tty/serial/apbuart.c1
-rw-r--r--drivers/tty/serial/ar933x_uart.c5
-rw-r--r--drivers/tty/serial/arc_uart.c5
-rw-r--r--drivers/tty/serial/atmel_serial.c65
-rw-r--r--drivers/tty/serial/atmel_serial.h6
-rw-r--r--drivers/tty/serial/bcm63xx_uart.c5
-rw-r--r--drivers/tty/serial/bfin_sport_uart.c5
-rw-r--r--drivers/tty/serial/bfin_sport_uart.h3
-rw-r--r--drivers/tty/serial/bfin_uart.c10
-rw-r--r--drivers/tty/serial/clps711x.c6
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart.h6
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c16
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c16
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c16
-rw-r--r--drivers/tty/serial/digicolor-usart.c6
-rw-r--r--drivers/tty/serial/dz.c1
-rw-r--r--drivers/tty/serial/earlycon-arm-semihost.c13
-rw-r--r--drivers/tty/serial/earlycon.c5
-rw-r--r--drivers/tty/serial/efm32-uart.c1
-rw-r--r--drivers/tty/serial/fsl_lpuart.c33
-rw-r--r--drivers/tty/serial/icom.c16
-rw-r--r--drivers/tty/serial/icom.h15
-rw-r--r--drivers/tty/serial/ifx6x60.c20
-rw-r--r--drivers/tty/serial/ifx6x60.h18
-rw-r--r--drivers/tty/serial/imx.c103
-rw-r--r--drivers/tty/serial/ioc3_serial.c5
-rw-r--r--drivers/tty/serial/ioc4_serial.c5
-rw-r--r--drivers/tty/serial/ip22zilog.c1
-rw-r--r--drivers/tty/serial/jsm/jsm.h11
-rw-r--r--drivers/tty/serial/jsm/jsm_cls.c11
-rw-r--r--drivers/tty/serial/jsm/jsm_driver.c11
-rw-r--r--drivers/tty/serial/jsm/jsm_neo.c11
-rw-r--r--drivers/tty/serial/jsm/jsm_tty.c27
-rw-r--r--drivers/tty/serial/kgdb_nmi.c5
-rw-r--r--drivers/tty/serial/kgdboc.c5
-rw-r--r--drivers/tty/serial/lantiq.c14
-rw-r--r--drivers/tty/serial/lpc32xx_hs.c11
-rw-r--r--drivers/tty/serial/m32r_sio.c14
-rw-r--r--drivers/tty/serial/m32r_sio_reg.h4
-rw-r--r--drivers/tty/serial/max3100.c16
-rw-r--r--drivers/tty/serial/max310x.c6
-rw-r--r--drivers/tty/serial/mcf.c6
-rw-r--r--drivers/tty/serial/men_z135_uart.c5
-rw-r--r--drivers/tty/serial/meson_uart.c31
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c5
-rw-r--r--drivers/tty/serial/mps2-uart.c5
-rw-r--r--drivers/tty/serial/mpsc.c6
-rw-r--r--drivers/tty/serial/msm_serial.c10
-rw-r--r--drivers/tty/serial/mux.c9
-rw-r--r--drivers/tty/serial/mvebu-uart.c495
-rw-r--r--drivers/tty/serial/mxs-auart.c5
-rw-r--r--drivers/tty/serial/netx-serial.c14
-rw-r--r--drivers/tty/serial/omap-serial.c23
-rw-r--r--drivers/tty/serial/owl-uart.c14
-rw-r--r--drivers/tty/serial/pch_uart.c14
-rw-r--r--drivers/tty/serial/pic32_uart.c3
-rw-r--r--drivers/tty/serial/pic32_uart.h3
-rw-r--r--drivers/tty/serial/pmac_zilog.c15
-rw-r--r--drivers/tty/serial/pnx8xxx_uart.c11
-rw-r--r--drivers/tty/serial/pxa.c6
-rw-r--r--drivers/tty/serial/rp2.c5
-rw-r--r--drivers/tty/serial/sa1100.c20
-rw-r--r--drivers/tty/serial/samsung.c5
-rw-r--r--drivers/tty/serial/samsung.h5
-rw-r--r--drivers/tty/serial/sb1250-duart.c6
-rw-r--r--drivers/tty/serial/sc16is7xx.c7
-rw-r--r--drivers/tty/serial/sccnxp.c13
-rw-r--r--drivers/tty/serial/serial-tegra.c13
-rw-r--r--drivers/tty/serial/serial_core.c54
-rw-r--r--drivers/tty/serial/serial_ks8695.c7
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.c11
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.h12
-rw-r--r--drivers/tty/serial/serial_txx9.c5
-rw-r--r--drivers/tty/serial/sh-sci.c103
-rw-r--r--drivers/tty/serial/sh-sci.h3
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c3
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h3
-rw-r--r--drivers/tty/serial/sn_console.c23
-rw-r--r--drivers/tty/serial/sprd_serial.c10
-rw-r--r--drivers/tty/serial/st-asc.c7
-rw-r--r--drivers/tty/serial/stm32-usart.c5
-rw-r--r--drivers/tty/serial/stm32-usart.h2
-rw-r--r--drivers/tty/serial/suncore.c1
-rw-r--r--drivers/tty/serial/sunhv.c1
-rw-r--r--drivers/tty/serial/sunsab.c1
-rw-r--r--drivers/tty/serial/sunsu.c1
-rw-r--r--drivers/tty/serial/sunzilog.c1
-rw-r--r--drivers/tty/serial/tilegx.c11
-rw-r--r--drivers/tty/serial/timbuart.c14
-rw-r--r--drivers/tty/serial/timbuart.h14
-rw-r--r--drivers/tty/serial/uartlite.c7
-rw-r--r--drivers/tty/serial/ucc_uart.c6
-rw-r--r--drivers/tty/serial/vr41xx_siu.c15
-rw-r--r--drivers/tty/serial/vt8500_serial.c10
-rw-r--r--drivers/tty/serial/xilinx_uartps.c9
-rw-r--r--drivers/tty/serial/zs.c1
-rw-r--r--drivers/tty/synclink.c6
-rw-r--r--drivers/tty/synclink_gt.c3
-rw-r--r--drivers/tty/synclinkmp.c2
-rw-r--r--drivers/tty/sysrq.c18
-rw-r--r--drivers/tty/tty_audit.c6
-rw-r--r--drivers/tty/tty_baudrate.c1
-rw-r--r--drivers/tty/tty_buffer.c3
-rw-r--r--drivers/tty/tty_io.c1
-rw-r--r--drivers/tty/tty_ioctl.c1
-rw-r--r--drivers/tty/tty_jobctrl.c1
-rw-r--r--drivers/tty/tty_ldisc.c1
-rw-r--r--drivers/tty/tty_ldsem.c4
-rw-r--r--drivers/tty/tty_port.c5
-rw-r--r--drivers/tty/vcc.c25
-rw-r--r--drivers/tty/vt/consolemap.c1
-rw-r--r--drivers/tty/vt/keyboard.c1
-rw-r--r--drivers/tty/vt/vt.c107
-rw-r--r--fs/proc/proc_tty.c3
-rw-r--r--include/acpi/acpi_bus.h2
-rw-r--r--include/linux/cyclades.h3
-rw-r--r--include/linux/serial_core.h5
-rw-r--r--include/uapi/linux/serial_reg.h1
202 files changed, 1276 insertions, 1668 deletions
diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index 4408af693d0c..6f44df94101c 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -71,7 +71,7 @@ channel: a phandle to the DMA controller plus the following four integer cells:
Example:
usart1: serial@40011000 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&clk_pclk2>;
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index e6e6142e33ac..7c0d6b2f53e4 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -24,6 +24,7 @@ Optional properties:
- dma-names: "rx" for RX channel, "tx" for TX channel.
- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
capable USARTs.
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
<chip> compatible description:
- at91rm9200: legacy USART support
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index 574c3a2c77d5..860a9559839a 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -9,6 +9,7 @@ Optional properties:
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
Please check Documentation/devicetree/bindings/serial/serial.txt
for the complete list of generic properties.
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
index a1252a047f78..59567b51cf09 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
@@ -16,6 +16,7 @@ Required properties:
Optional properties:
- dmas: A list of two dma specifiers, one for each entry in dma-names.
- dma-names: should contain "tx" and "rx".
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
Note: Optional properties for DMA support. Write them both or both not.
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 7a71b5de77d6..43eac675f21f 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -19,6 +19,7 @@ Optional properties:
- dmas : DMA specifier, consisting of a phandle to the DMA controller
node and a DMA channel number.
- dma-names : "rx" for receive channel, "tx" for transmit channel.
+- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
Example:
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
index 3657f9f9d17a..d150b04a6229 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -2,14 +2,10 @@
Required properties:
- compatible: can be either:
- - "st,stm32-usart",
- "st,stm32-uart",
- - "st,stm32f7-usart",
- "st,stm32f7-uart",
- - "st,stm32h7-usart"
- "st,stm32h7-uart".
- depending on whether the device supports synchronous mode
- and is compatible with stm32(f4), stm32f7 or stm32h7.
+ depending is compatible with stm32(f4), stm32f7 or stm32h7.
- reg: The address and length of the peripheral registers space
- interrupts:
- The interrupt line for the USART instance,
@@ -33,7 +29,7 @@ usart4: serial@40004c00 {
};
usart2: serial@40004400 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&clk_pclk1>;
@@ -43,7 +39,7 @@ usart2: serial@40004400 {
};
usart1: serial@40011000 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 0 164>;
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5b36eb114ddc..10099df8b73e 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -314,7 +314,7 @@
};
usart2: serial@40004400 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
@@ -322,7 +322,7 @@
};
usart3: serial@40004800 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
@@ -386,7 +386,7 @@
};
usart7: serial@40007800 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
@@ -394,7 +394,7 @@
};
usart8: serial@40007c00 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
@@ -444,7 +444,7 @@
};
usart1: serial@40011000 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
@@ -455,7 +455,7 @@
};
usart6: serial@40011400 {
- compatible = "st,stm32-usart", "st,stm32-uart";
+ compatible = "st,stm32-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 5633860037d2..5f9417894059 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -136,7 +136,7 @@
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 1 CLK_USART2>;
@@ -144,7 +144,7 @@
};
usart3: serial@40004800 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 1 CLK_USART3>;
@@ -177,7 +177,7 @@
};
usart7: serial@40007800 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 1 CLK_UART7>;
@@ -185,7 +185,7 @@
};
usart8: serial@40007c00 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 1 CLK_UART8>;
@@ -193,7 +193,7 @@
};
usart1: serial@40011000 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 1 CLK_USART1>;
@@ -201,7 +201,7 @@
};
usart6: serial@40011400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 1 CLK_USART6>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 58ec2275181e..26de31578701 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -67,7 +67,7 @@
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
@@ -99,7 +99,7 @@
};
usart1: serial@40011000 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
status = "disabled";
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 81367edc8a10..e14e964bfe6d 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1505,41 +1505,38 @@ static void acpi_init_coherency(struct acpi_device *adev)
adev->flags.coherent_dma = cca;
}
-static int acpi_check_spi_i2c_slave(struct acpi_resource *ares, void *data)
+static int acpi_check_serial_bus_slave(struct acpi_resource *ares, void *data)
{
- bool *is_spi_i2c_slave_p = data;
+ bool *is_serial_bus_slave_p = data;
if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
return 1;
- /*
- * devices that are connected to UART still need to be enumerated to
- * platform bus
- */
- if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART)
- *is_spi_i2c_slave_p = true;
+ *is_serial_bus_slave_p = true;
/* no need to do more checking */
return -1;
}
-static bool acpi_is_spi_i2c_slave(struct acpi_device *device)
+static bool acpi_is_serial_bus_slave(struct acpi_device *device)
{
struct list_head resource_list;
- bool is_spi_i2c_slave = false;
+ bool is_serial_bus_slave = false;
/* Macs use device properties in lieu of _CRS resources */
if (x86_apple_machine &&
(fwnode_property_present(&device->fwnode, "spiSclkPeriod") ||
- fwnode_property_present(&device->fwnode, "i2cAddress")))
+ fwnode_property_present(&device->fwnode, "i2cAddress") ||
+ fwnode_property_present(&device->fwnode, "baud")))
return true;
INIT_LIST_HEAD(&resource_list);
- acpi_dev_get_resources(device, &resource_list, acpi_check_spi_i2c_slave,
- &is_spi_i2c_slave);
+ acpi_dev_get_resources(device, &resource_list,
+ acpi_check_serial_bus_slave,
+ &is_serial_bus_slave);
acpi_dev_free_resource_list(&resource_list);
- return is_spi_i2c_slave;
+ return is_serial_bus_slave;
}
void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
@@ -1557,7 +1554,7 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
acpi_bus_get_flags(device);
device->flags.match_driver = false;
device->flags.initialized = true;
- device->flags.spi_i2c_slave = acpi_is_spi_i2c_slave(device);
+ device->flags.serial_bus_slave = acpi_is_serial_bus_slave(device);
acpi_device_clear_enumerated(device);
device_initialize(&device->dev);
dev_set_uevent_suppress(&device->dev, true);
@@ -1841,10 +1838,10 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
static void acpi_default_enumeration(struct acpi_device *device)
{
/*
- * Do not enumerate SPI/I2C slaves as they will be enumerated by their
- * respective parents.
+ * Do not enumerate SPI/I2C/UART slaves as they will be enumerated by
+ * their respective parents.
*/
- if (!device->flags.spi_i2c_slave) {
+ if (!device->flags.serial_bus_slave) {
acpi_create_platform_device(device, NULL);
acpi_device_set_enumerated(device);
} else {
@@ -1941,7 +1938,7 @@ static void acpi_bus_attach(struct acpi_device *device)
return;
device->flags.match_driver = true;
- if (ret > 0 && !device->flags.spi_i2c_slave) {
+ if (ret > 0 && !device->flags.serial_bus_slave) {
acpi_device_set_enumerated(device);
goto ok;
}
@@ -1950,7 +1947,7 @@ static void acpi_bus_attach(struct acpi_device *device)
if (ret < 0)
return;
- if (!device->pnp.type.platform_id && !device->flags.spi_i2c_slave)
+ if (!device->pnp.type.platform_id && !device->flags.serial_bus_slave)
acpi_device_set_enumerated(device);
else
acpi_default_enumeration(device);
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 9820e20993db..32d7ce430b02 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Serial driver for the amiga builtin port.
*
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index ce24182f8514..c369bf27a67b 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* TTY over Blackfin JTAG Communication
*
* Copyright 2008-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
*/
#define DRV_NAME "bfin-jtag-comm"
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index dac8a1a8e4ac..5d442469c95e 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
#undef BLOCKMOVE
#define Z_WAKE
#undef Z_EXT_CHARS_IN_BUFFER
@@ -286,8 +287,7 @@ static long cyz_polling_cycle = CZ_DEF_POLL;
static DEFINE_TIMER(cyz_timerlist, cyz_poll);
#else /* CONFIG_CYZ_INTR */
-static void cyz_rx_restart(unsigned long);
-static struct timer_list cyz_rx_full_timer[NR_PORTS];
+static void cyz_rx_restart(struct timer_list *);
#endif /* CONFIG_CYZ_INTR */
static void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
@@ -992,10 +992,8 @@ static void cyz_handle_rx(struct cyclades_port *info)
else
char_count = rx_put - rx_get + rx_bufsize;
if (char_count >= readl(&buf_ctrl->rx_threshold) &&
- !timer_pending(&cyz_rx_full_timer[
- info->line]))
- mod_timer(&cyz_rx_full_timer[info->line],
- jiffies + 1);
+ !timer_pending(&info->rx_full_timer))
+ mod_timer(&info->rx_full_timer, jiffies + 1);
#endif
info->idle_stats.recv_idle = jiffies;
tty_schedule_flip(&info->port);
@@ -1197,9 +1195,9 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
} /* cyz_interrupt */
-static void cyz_rx_restart(unsigned long arg)
+static void cyz_rx_restart(struct timer_list *t)
{
- struct cyclades_port *info = (struct cyclades_port *)arg;
+ struct cyclades_port *info = from_timer(info, t, rx_full_timer);
struct cyclades_card *card = info->card;
int retval;
__u32 channel = info->line - card->first_line;
@@ -3097,8 +3095,7 @@ static int cy_init_card(struct cyclades_card *cinfo)
else
info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
#ifdef CONFIG_CYZ_INTR
- setup_timer(&cyz_rx_full_timer[port],
- cyz_rx_restart, (unsigned long)info);
+ timer_setup(&info->rx_full_timer, cyz_rx_restart, 0);
#endif
} else {
unsigned short chip_number;
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index a1c7125cb968..47ac56817c43 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/* ePAPR hypervisor byte channel device driver
*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* Author: Timur Tabi <timur@freescale.com>
*
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
* This driver support three distinct interfaces, all of which are related to
* ePAPR hypervisor byte channels.
*
@@ -328,7 +325,7 @@ console_initcall(ehv_bc_console_init);
/******************************** TTY DRIVER ********************************/
/*
- * byte channel receive interupt handler
+ * byte channel receive interrupt handler
*
* This ISR is called whenever data is available on a byte channel.
*/
@@ -428,7 +425,7 @@ static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc)
}
/*
- * byte channel transmit interupt handler
+ * byte channel transmit interrupt handler
*
* This ISR is called whenever space becomes available for transmitting
* characters on a byte channel.
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 381e981dee06..7f657bb5113c 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007 Google, Inc.
* Copyright (C) 2012 Intel, Inc.
* Copyright (C) 2017 Imagination Technologies Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/console.h>
diff --git a/drivers/tty/hvc/hvc_bfin_jtag.c b/drivers/tty/hvc/hvc_bfin_jtag.c
index 31d6cc6a77af..dd7cae4c195b 100644
--- a/drivers/tty/hvc/hvc_bfin_jtag.c
+++ b/drivers/tty/hvc/hvc_bfin_jtag.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Console via Blackfin JTAG Communication
*
* Copyright 2008-2011 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
*/
#include <linux/console.h>
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index a8d399188242..7709fcc707f4 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
* Copyright (C) 2001 Paul Mackerras <paulus@au.ibm.com>, IBM
@@ -6,20 +7,6 @@
*
* Additional Author(s):
* Ryan S. Arnold <rsa@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/console.h>
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
index 798c48d0d32c..ea63090e013f 100644
--- a/drivers/tty/hvc/hvc_console.h
+++ b/drivers/tty/hvc/hvc_console.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* hvc_console.h
* Copyright (C) 2005 IBM Corporation
@@ -8,20 +9,6 @@
* hvc_console header information:
* moved here from arch/powerpc/include/asm/hvconsole.h
* and drivers/char/hvc_console.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef HVC_CONSOLE_H
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 82f240fb98f0..02629a1f193d 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -1,14 +1,5 @@
-/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. */
#include <linux/init.h>
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 16331a90c1e8..2ed07ca6389e 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -1,22 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* opal driver interface to hvc_console.c
*
* Copyright 2011 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#undef DEBUG
diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c
index 08c87920b74a..e8b8c645482b 100644
--- a/drivers/tty/hvc/hvc_rtas.c
+++ b/drivers/tty/hvc/hvc_rtas.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* IBM RTAS driver interface to hvc_console.c
*
@@ -11,20 +12,6 @@
*
* inspired by drivers/char/hvc_console.c
* written by Anton Blanchard and Paul Mackerras
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/console.h>
diff --git a/drivers/tty/hvc/hvc_tile.c b/drivers/tty/hvc/hvc_tile.c
index 9da1e842bbe9..b517c0661abb 100644
--- a/drivers/tty/hvc/hvc_tile.c
+++ b/drivers/tty/hvc/hvc_tile.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for
- * more details.
- *
* Tilera TILE Processor hypervisor console
*/
diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c
index 9cf573d06a29..a4c9913f76a0 100644
--- a/drivers/tty/hvc/hvc_udbg.c
+++ b/drivers/tty/hvc/hvc_udbg.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* udbg interface to hvc_console.c
*
* (C) Copyright David Gibson, IBM Corporation 2008.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/console.h>
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index a1d272ac82bb..59eaa620bf13 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* vio driver interface to hvc_console.c
*
@@ -14,20 +15,6 @@
* Additional Author(s):
* Ryan S. Arnold <rsa@us.ibm.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
* TODO:
*
* - handle error in sending hvsi protocol packets
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 5e87e4866bcb..dc43fa96c3de 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* xen console driver interface to hvc_console.c
*
* (c) 2007 Gerd Hoffmann <kraxel@suse.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/console.h>
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 63c29fe9d21f..1db1d97e72e7 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* IBM eServer Hypervisor Virtual Console Server Device Driver
* Copyright (C) 2003, 2004 IBM Corp.
* Ryan S. Arnold (rsa@us.ibm.com)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
* Author(s) : Ryan S. Arnold <rsa@us.ibm.com>
*
* This is the device driver for the IBM Hypervisor Virtual Console Server,
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 2e578d6433af..66f95f758be0 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2004 Hollis Blanchard <hollisb@us.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Host Virtual Serial Interface (HVSI) is a protocol between the hosted OS
diff --git a/drivers/tty/ipwireless/main.c b/drivers/tty/ipwireless/main.c
index 655c7948261c..3475e841ef5c 100644
--- a/drivers/tty/ipwireless/main.c
+++ b/drivers/tty/ipwireless/main.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* IPWireless 3G PCMCIA Network Driver
*
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 40af32108ff5..ee7958ab269f 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1,9 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
* Original driver code supplied by Multi-Tech
*
* Changes
diff --git a/drivers/tty/metag_da.c b/drivers/tty/metag_da.c
index 25ccef2fe748..99eaed4b2dbc 100644
--- a/drivers/tty/metag_da.c
+++ b/drivers/tty/metag_da.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* dashtty.c - tty driver for Dash channels interface.
*
* Copyright (C) 2007,2008,2012 Imagination Technologies
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
*/
#include <linux/atomic.h>
@@ -309,7 +305,7 @@ static int put_data(void *arg)
/*
* This gets called every DA_TTY_POLL and polls the channels for data
*/
-static void dashtty_timer(unsigned long ignored)
+static void dashtty_timer(struct timer_list *poll_timer)
{
int channel;
@@ -323,12 +319,12 @@ static void dashtty_timer(unsigned long ignored)
if (channel >= 0)
fetch_data(channel);
- mod_timer(&poll_timer, jiffies + DA_TTY_POLL);
+ mod_timer(poll_timer, jiffies + DA_TTY_POLL);
}
static void add_poll_timer(struct timer_list *poll_timer)
{
- setup_pinned_timer(poll_timer, dashtty_timer, 0);
+ timer_setup(poll_timer, dashtty_timer, TIMER_PINNED);
poll_timer->expires = jiffies + DA_TTY_POLL;
/*
@@ -461,7 +457,7 @@ static void dashtty_hangup(struct tty_struct *tty)
* buffers. It is used to delay the expensive writeout until the writer has
* stopped writing.
*/
-static void dashtty_put_timer(unsigned long ignored)
+static void dashtty_put_timer(struct timer_list *unused)
{
if (atomic_read(&dashtty_xmit_cnt))
wake_up_interruptible(&dashtty_waitqueue);
@@ -603,7 +599,7 @@ static int __init dashtty_init(void)
complete(&dport->xmit_empty);
}
- setup_timer(&put_timer, dashtty_put_timer, 0);
+ timer_setup(&put_timer, dashtty_put_timer, 0);
init_waitqueue_head(&dashtty_waitqueue);
dashtty_thread = kthread_create(put_data, NULL, "ttyDA");
diff --git a/drivers/tty/mips_ejtag_fdc.c b/drivers/tty/mips_ejtag_fdc.c
index a2dab3fb8751..4c1cd49ae95b 100644
--- a/drivers/tty/mips_ejtag_fdc.c
+++ b/drivers/tty/mips_ejtag_fdc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* TTY driver for MIPS EJTAG Fast Debug Channels.
*
* Copyright (C) 2007-2015 Imagination Technologies Ltd
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for more
- * details.
*/
#include <linux/atomic.h>
@@ -683,9 +680,9 @@ static irqreturn_t mips_ejtag_fdc_isr(int irq, void *dev_id)
* It simply triggers the common FDC handler code and arranges for further
* polling.
*/
-static void mips_ejtag_fdc_tty_timer(unsigned long opaque)
+static void mips_ejtag_fdc_tty_timer(struct timer_list *t)
{
- struct mips_ejtag_fdc_tty *priv = (void *)opaque;
+ struct mips_ejtag_fdc_tty *priv = from_timer(priv, t, poll_timer);
mips_ejtag_fdc_handle(priv);
if (!priv->removing)
@@ -1002,8 +999,8 @@ static int mips_ejtag_fdc_tty_probe(struct mips_cdmm_device *dev)
raw_spin_unlock_irq(&priv->lock);
} else {
/* If we didn't get an usable IRQ, poll instead */
- setup_pinned_timer(&priv->poll_timer, mips_ejtag_fdc_tty_timer,
- (unsigned long)priv);
+ timer_setup(&priv->poll_timer, mips_ejtag_fdc_tty_timer,
+ TIMER_PINNED);
priv->poll_timer.expires = jiffies + FDC_TTY_POLL;
/*
* Always attach the timer to the right CPU. The channels are
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 93d37655d928..65a70f3c7cde 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*****************************************************************************/
/*
* moxa.c -- MOXA Intellio family multiport serial driver.
@@ -7,11 +8,6 @@
*
* This code is loosely based on the Linux serial driver, written by
* Linus Torvalds, Theodore T'so and others.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
/*
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 7dd38047ba23..8bc15cb67a58 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* mxser.c -- MOXA Smartio/Industio family multiport serial driver.
*
@@ -8,11 +9,6 @@
* Linux serial driver, written by Linus Torvalds, Theodore T'so and
* others.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
* <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
* www.moxa.com.
@@ -642,8 +638,7 @@ static int mxser_set_baud(struct tty_struct *tty, long newspd)
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static int mxser_change_speed(struct tty_struct *tty,
- struct ktermios *old_termios)
+static int mxser_change_speed(struct tty_struct *tty)
{
struct mxser_port *info = tty->driver_data;
unsigned cflag, cval, fcr;
@@ -945,7 +940,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
/*
* and set the speed of the serial port
*/
- mxser_change_speed(tty, NULL);
+ mxser_change_speed(tty);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
@@ -1288,7 +1283,7 @@ static int mxser_set_serial_info(struct tty_struct *tty,
if (tty_port_initialized(port)) {
if (flags != (port->flags & ASYNC_SPD_MASK)) {
spin_lock_irqsave(&info->slock, sl_flags);
- mxser_change_speed(tty, NULL);
+ mxser_change_speed(tty);
spin_unlock_irqrestore(&info->slock, sl_flags);
}
} else {
@@ -1946,7 +1941,7 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
unsigned long flags;
spin_lock_irqsave(&info->slock, flags);
- mxser_change_speed(tty, old_termios);
+ mxser_change_speed(tty);
spin_unlock_irqrestore(&info->slock, flags);
if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
@@ -2375,8 +2370,7 @@ static void mxser_release_ISA_res(struct mxser_board *brd)
mxser_release_vector(brd);
}
-static int mxser_initbrd(struct mxser_board *brd,
- struct pci_dev *pdev)
+static int mxser_initbrd(struct mxser_board *brd)
{
struct mxser_port *info;
unsigned int i;
@@ -2640,7 +2634,7 @@ static int mxser_probe(struct pci_dev *pdev,
}
/* mxser_initbrd will hook ISR. */
- retval = mxser_initbrd(brd, pdev);
+ retval = mxser_initbrd(brd);
if (retval)
goto err_rel3;
@@ -2746,7 +2740,7 @@ static int __init mxser_module_init(void)
brd->info->name, ioaddr[b]);
/* mxser_initbrd will hook ISR. */
- if (mxser_initbrd(brd, NULL) < 0) {
+ if (mxser_initbrd(brd) < 0) {
mxser_release_ISA_res(brd);
brd->info = NULL;
continue;
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 0a3c9665e015..3a39eb685c69 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* n_gsm.c GSM 0710 tty multiplexor
* Copyright (c) 2009/10 Intel Corporation
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
* * THIS IS A DEVELOPMENT SNAPSHOT IT IS NOT A FINAL RELEASE *
*
* TO DO:
@@ -1646,9 +1634,7 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
}
skb_queue_head_init(&dlci->skb_list);
- init_timer(&dlci->t1);
- dlci->t1.function = gsm_dlci_t1;
- dlci->t1.data = (unsigned long)dlci;
+ setup_timer(&dlci->t1, gsm_dlci_t1, (unsigned long)dlci);
tty_port_init(&dlci->port);
dlci->port.ops = &gsm_port_ops;
dlci->gsm = gsm;
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 7b2a466616d6..eea7b6cb3cc4 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
/* generic HDLC line discipline for Linux
*
* Written by Paul Fulghum paulkf@microgate.com
@@ -11,8 +12,6 @@
*
* Original release 01/11/99
*
- * This code is released under the GNU General Public License (GPL)
- *
* This module implements the tty line discipline N_HDLC for use with
* tty device drivers that support bit-synchronous HDLC communications.
*
diff --git a/drivers/tty/n_null.c b/drivers/tty/n_null.c
index d63261c36e42..96feabae4740 100644
--- a/drivers/tty/n_null.c
+++ b/drivers/tty/n_null.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/tty.h>
@@ -7,19 +8,6 @@
* n_null.c - Null line discipline used in the failure path
*
* Copyright (C) Intel 2017
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
static int n_null_open(struct tty_struct *tty)
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 305b6490d405..9f246d4db3ca 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
/* r3964 linediscipline for linux
*
* -----------------------------------------------------------
@@ -5,9 +6,6 @@
* Philips Automation Projects
* Kassel (Germany)
* -----------------------------------------------------------
- * This software may be used and distributed according to the terms of
- * the GNU General Public License, incorporated herein by reference.
- *
* Author:
* L. Haag
*
diff --git a/drivers/tty/n_tracerouter.c b/drivers/tty/n_tracerouter.c
index ac5716979bc1..4479af4d2fa5 100644
--- a/drivers/tty/n_tracerouter.c
+++ b/drivers/tty/n_tracerouter.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* n_tracerouter.c - Trace data router through tty space
*
@@ -5,17 +6,6 @@
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
* This trace router uses the Linux line discipline framework to route
* trace data coming from a HW Modem to a PTI (Parallel Trace Module) port.
* The solution is not specific to a HW modem and this line disciple can
diff --git a/drivers/tty/n_tracesink.c b/drivers/tty/n_tracesink.c
index 4616870a6b1b..d96ba82cc356 100644
--- a/drivers/tty/n_tracesink.c
+++ b/drivers/tty/n_tracesink.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* n_tracesink.c - Trace data router and sink path through tty space.
*
@@ -5,17 +6,6 @@
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
* The trace sink uses the Linux line discipline framework to receive
* trace data coming from the PTI source line discipline driver
* to a user-desired tty port, like USB.
diff --git a/drivers/tty/n_tracesink.h b/drivers/tty/n_tracesink.h
index a68bb44f1ef5..1b846330c855 100644
--- a/drivers/tty/n_tracesink.h
+++ b/drivers/tty/n_tracesink.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* n_tracesink.h - Kernel driver API to route trace data in kernel space.
*
@@ -5,17 +6,6 @@
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
* The PTI (Parallel Trace Interface) driver directs trace data routed from
* various parts in the system out through the Intel Penwell PTI port and
* out of the mobile device for analysis with a debugging tool
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index bdf0e6e89991..427e0d5d8f13 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
/*
* n_tty.c --- implements the N_TTY line discipline.
*
@@ -15,9 +16,6 @@
* This file also contains code originally written by Linus Torvalds,
* Copyright 1991, 1992, 1993, and by Julian Cowley, Copyright 1994.
*
- * This file may be redistributed under the terms of the GNU General Public
- * License.
- *
* Reduced memory usage for older ARM systems - Russell King.
*
* 2000/01/20 Fixed SMP locking on put_tty_queue using bits of
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 39b3723a32a6..b57b35066ebe 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* nozomi.c -- HSDPA driver Broadband Wireless Data Card - Globe Trotter
*
@@ -21,20 +22,6 @@
* Copyright (c) 2006 Option Wireless n/v
* All rights Reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
* --------------------------------------------------------------------------
*/
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index aa695fda1084..f7dc9b1ea806 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* RocketPort device driver for Linux
*
* Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
*
* Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/tty/serdev/Kconfig b/drivers/tty/serdev/Kconfig
index cdc6b820cf93..1dbc8352e027 100644
--- a/drivers/tty/serdev/Kconfig
+++ b/drivers/tty/serdev/Kconfig
@@ -6,11 +6,19 @@ menuconfig SERIAL_DEV_BUS
help
Core support for devices connected via a serial port.
+ Note that you typically also want to enable TTY port controller support.
+
if SERIAL_DEV_BUS
config SERIAL_DEV_CTRL_TTYPORT
bool "Serial device TTY port controller"
+ help
+ Say Y here if you want to use the Serial device bus with common TTY
+ drivers (e.g. serial drivers).
+
+ If unsure, say Y.
depends on TTY
depends on SERIAL_DEV_BUS != m
+ default y
endif
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index c68fb3a8ea1c..1bef39828ca7 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -1,19 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016-2017 Linaro Ltd., Rob Herring <robh@kernel.org>
*
* Based on drivers/spmi/spmi.c:
* Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
+#include <linux/acpi.h>
#include <linux/errno.h>
#include <linux/idr.h>
#include <linux/kernel.h>
@@ -49,13 +42,22 @@ static const struct device_type serdev_ctrl_type = {
static int serdev_device_match(struct device *dev, struct device_driver *drv)
{
- /* TODO: ACPI and platform matching */
+ /* TODO: platform matching */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
return of_driver_match_device(dev, drv);
}
static int serdev_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- /* TODO: ACPI and platform modalias */
+ int rc;
+
+ /* TODO: platform modalias */
+ rc = acpi_device_uevent_modalias(dev, env);
+ if (rc != -ENODEV)
+ return rc;
+
return of_device_uevent_modalias(dev, env);
}
@@ -65,21 +67,32 @@ static int serdev_uevent(struct device *dev, struct kobj_uevent_env *env)
*/
int serdev_device_add(struct serdev_device *serdev)
{
+ struct serdev_controller *ctrl = serdev->ctrl;
struct device *parent = serdev->dev.parent;
int err;
dev_set_name(&serdev->dev, "%s-%d", dev_name(parent), serdev->nr);
+ /* Only a single slave device is currently supported. */
+ if (ctrl->serdev) {
+ dev_err(&serdev->dev, "controller busy\n");
+ return -EBUSY;
+ }
+ ctrl->serdev = serdev;
+
err = device_add(&serdev->dev);
if (err < 0) {
dev_err(&serdev->dev, "Can't add %s, status %d\n",
dev_name(&serdev->dev), err);
- goto err_device_add;
+ goto err_clear_serdev;
}
dev_dbg(&serdev->dev, "device %s registered\n", dev_name(&serdev->dev));
-err_device_add:
+ return 0;
+
+err_clear_serdev:
+ ctrl->serdev = NULL;
return err;
}
EXPORT_SYMBOL_GPL(serdev_device_add);
@@ -90,7 +103,10 @@ EXPORT_SYMBOL_GPL(serdev_device_add);
*/
void serdev_device_remove(struct serdev_device *serdev)
{
+ struct serdev_controller *ctrl = serdev->ctrl;
+
device_unregister(&serdev->dev);
+ ctrl->serdev = NULL;
}
EXPORT_SYMBOL_GPL(serdev_device_remove);
@@ -260,6 +276,12 @@ static int serdev_drv_remove(struct device *dev)
static ssize_t modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ int len;
+
+ len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
+ if (len != -ENODEV)
+ return len;
+
return of_device_modalias(dev, buf, PAGE_SIZE);
}
DEVICE_ATTR_RO(modalias);
@@ -295,7 +317,6 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl)
return NULL;
serdev->ctrl = ctrl;
- ctrl->serdev = serdev;
device_initialize(&serdev->dev);
serdev->dev.parent = &ctrl->dev;
serdev->dev.bus = &serdev_bus_type;
@@ -329,26 +350,31 @@ struct serdev_controller *serdev_controller_alloc(struct device *parent,
if (!ctrl)
return NULL;
- device_initialize(&ctrl->dev);
- ctrl->dev.type = &serdev_ctrl_type;
- ctrl->dev.bus = &serdev_bus_type;
- ctrl->dev.parent = parent;
- ctrl->dev.of_node = parent->of_node;
- serdev_controller_set_drvdata(ctrl, &ctrl[1]);
-
id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
dev_err(parent,
"unable to allocate serdev controller identifier.\n");
- serdev_controller_put(ctrl);
- return NULL;
+ goto err_free;
}
ctrl->nr = id;
+
+ device_initialize(&ctrl->dev);
+ ctrl->dev.type = &serdev_ctrl_type;
+ ctrl->dev.bus = &serdev_bus_type;
+ ctrl->dev.parent = parent;
+ ctrl->dev.of_node = parent->of_node;
+ serdev_controller_set_drvdata(ctrl, &ctrl[1]);
+
dev_set_name(&ctrl->dev, "serial%d", id);
dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
return ctrl;
+
+err_free:
+ kfree(ctrl);
+
+ return NULL;
}
EXPORT_SYMBOL_GPL(serdev_controller_alloc);
@@ -385,6 +411,75 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
return 0;
}
+#ifdef CONFIG_ACPI
+static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
+ struct acpi_device *adev)
+{
+ struct serdev_device *serdev = NULL;
+ int err;
+
+ if (acpi_bus_get_status(adev) || !adev->status.present ||
+ acpi_device_enumerated(adev))
+ return AE_OK;
+
+ serdev = serdev_device_alloc(ctrl);
+ if (!serdev) {
+ dev_err(&ctrl->dev, "failed to allocate serdev device for %s\n",
+ dev_name(&adev->dev));
+ return AE_NO_MEMORY;
+ }
+
+ ACPI_COMPANION_SET(&serdev->dev, adev);
+ acpi_device_set_enumerated(adev);
+
+ err = serdev_device_add(serdev);
+ if (err) {
+ dev_err(&serdev->dev,
+ "failure adding ACPI serdev device. status %d\n", err);
+ serdev_device_put(serdev);
+ }
+
+ return AE_OK;
+}
+
+static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct serdev_controller *ctrl = data;
+ struct acpi_device *adev;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ return acpi_serdev_register_device(ctrl, adev);
+}
+
+static int acpi_serdev_register_devices(struct serdev_controller *ctrl)
+{
+ acpi_status status;
+ acpi_handle handle;
+
+ handle = ACPI_HANDLE(ctrl->dev.parent);
+ if (!handle)
+ return -ENODEV;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ acpi_serdev_add_device, NULL, ctrl, NULL);
+ if (ACPI_FAILURE(status))
+ dev_dbg(&ctrl->dev, "failed to enumerate serdev slaves\n");
+
+ if (!ctrl->serdev)
+ return -ENODEV;
+
+ return 0;
+}
+#else
+static inline int acpi_serdev_register_devices(struct serdev_controller *ctrl)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_ACPI */
+
/**
* serdev_controller_add() - Add an serdev controller
* @ctrl: controller to be registered.
@@ -394,7 +489,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
*/
int serdev_controller_add(struct serdev_controller *ctrl)
{
- int ret;
+ int ret_of, ret_acpi, ret;
/* Can't register until after driver model init */
if (WARN_ON(!is_registered))
@@ -404,9 +499,14 @@ int serdev_controller_add(struct serdev_controller *ctrl)
if (ret)
return ret;
- ret = of_serdev_register_devices(ctrl);
- if (ret)
+ ret_of = of_serdev_register_devices(ctrl);
+ ret_acpi = acpi_serdev_register_devices(ctrl);
+ if (ret_of && ret_acpi) {
+ dev_dbg(&ctrl->dev, "no devices registered: of:%d acpi:%d\n",
+ ret_of, ret_acpi);
+ ret = -ENODEV;
goto out_dev_del;
+ }
dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
ctrl->nr, &ctrl->dev);
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index 302018d67efa..ce7ad0acee7a 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016-2017 Linaro Ltd., Rob Herring <robh@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/serdev.h>
@@ -96,16 +88,21 @@ static int ttyport_open(struct serdev_controller *ctrl)
struct serport *serport = serdev_controller_get_drvdata(ctrl);
struct tty_struct *tty;
struct ktermios ktermios;
+ int ret;
tty = tty_init_dev(serport->tty_drv, serport->tty_idx);
if (IS_ERR(tty))
return PTR_ERR(tty);
serport->tty = tty;
- if (tty->ops->open)
- tty->ops->open(serport->tty, NULL);
- else
- tty_port_open(serport->port, tty, NULL);
+ if (!tty->ops->open || !tty->ops->close) {
+ ret = -ENODEV;
+ goto err_unlock;
+ }
+
+ ret = tty->ops->open(serport->tty, NULL);
+ if (ret)
+ goto err_close;
/* Bring the UART into a known 8 bits no parity hw fc state */
ktermios = tty->termios;
@@ -122,6 +119,14 @@ static int ttyport_open(struct serdev_controller *ctrl)
tty_unlock(serport->tty);
return 0;
+
+err_close:
+ tty->ops->close(tty, NULL);
+err_unlock:
+ tty_unlock(tty);
+ tty_release_struct(tty, serport->tty_idx);
+
+ return ret;
}
static void ttyport_close(struct serdev_controller *ctrl)
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 804632b4a929..32b3acf8150a 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for the serial port on the 21285 StrongArm-110 core logic chip.
*
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index b2bdc35f7495..ebfb0bd5bef5 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for 8250/16550-type serial ports
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
* Copyright (C) 2001 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/serial_8250.h>
diff --git a/drivers/tty/serial/8250/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c
index 522aeae05192..1691f1a57f89 100644
--- a/drivers/tty/serial/8250/8250_accent.c
+++ b/drivers/tty/serial/8250/8250_accent.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2005 Russell King.
* Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 402dfdd4940e..758c4aa203ab 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* linux/drivers/serial/acorn.c
*
* Copyright (C) 1996-2003 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/types.h>
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 33a801353114..74a408d9db24 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Serial Port driver for Aspeed VUART device
*
* Copyright (C) 2016 Jeremy Kerr <jk@ozlabs.org>, IBM Corp.
* Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
*/
#include <linux/device.h>
#include <linux/module.h>
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index a23c7da42ea8..bd53661103eb 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Serial port driver for BCM2835AUX UART
*
@@ -5,11 +6,6 @@
*
* Based on 8250_lpc18xx.c:
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/clk.h>
diff --git a/drivers/tty/serial/8250/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c
index a63b5998e383..a9b97c034653 100644
--- a/drivers/tty/serial/8250/8250_boca.c
+++ b/drivers/tty/serial/8250/8250_boca.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2005 Russell King.
* Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index d29b512a7d9f..d64afdd93872 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Universal/legacy driver for 8250/16550-type serial ports
*
@@ -11,11 +12,6 @@
* userspace-configurable "phantom" ports
* "serial8250" platform devices
* serial8250_register_8250_port() ports
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/module.h>
@@ -262,17 +258,17 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up)
* barely passable results for a 16550A. (Although at the expense
* of much CPU overhead).
*/
-static void serial8250_timeout(unsigned long data)
+static void serial8250_timeout(struct timer_list *t)
{
- struct uart_8250_port *up = (struct uart_8250_port *)data;
+ struct uart_8250_port *up = from_timer(up, t, timer);
up->port.handle_irq(&up->port);
mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
}
-static void serial8250_backup_timeout(unsigned long data)
+static void serial8250_backup_timeout(struct timer_list *t)
{
- struct uart_8250_port *up = (struct uart_8250_port *)data;
+ struct uart_8250_port *up = from_timer(up, t, timer);
unsigned int iir, ier = 0, lsr;
unsigned long flags;
@@ -329,8 +325,7 @@ static int univ8250_setup_irq(struct uart_8250_port *up)
if (up->bugs & UART_BUG_THRE) {
pr_debug("ttyS%d - using backup timer\n", serial_index(port));
- up->timer.function = serial8250_backup_timeout;
- up->timer.data = (unsigned long)up;
+ up->timer.function = (TIMER_FUNC_TYPE)serial8250_backup_timeout;
mod_timer(&up->timer, jiffies +
uart_poll_timeout(port) + HZ / 5);
}
@@ -341,7 +336,6 @@ static int univ8250_setup_irq(struct uart_8250_port *up)
* driver used to do this with IRQ0.
*/
if (!port->irq) {
- up->timer.data = (unsigned long)up;
mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
} else
retval = serial_link_irq_chain(up);
@@ -354,7 +348,7 @@ static void univ8250_release_irq(struct uart_8250_port *up)
struct uart_port *port = &up->port;
del_timer_sync(&up->timer);
- up->timer.function = serial8250_timeout;
+ up->timer.function = (TIMER_FUNC_TYPE)serial8250_timeout;
if (port->irq)
serial_unlink_irq_chain(up);
}
@@ -525,8 +519,7 @@ static void __init serial8250_isa_init_ports(void)
base_ops = port->ops;
port->ops = &univ8250_port_ops;
- init_timer(&up->timer);
- up->timer.function = serial8250_timeout;
+ timer_setup(&up->timer, serial8250_timeout, 0);
up->ops = &univ8250_driver_ops;
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 26f17456b0d7..bfa1a857f3ff 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* 8250_dma.c - DMA Engine API support for 8250.c
*
* Copyright (C) 2013 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/tty.h>
#include <linux/tty_flip.h>
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 7e638997bfc2..5bb0c42c88dd 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Synopsys DesignWare 8250 driver.
*
* Copyright 2011 Picochip, Jamie Iles.
* Copyright 2013 Intel Corporation
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
* LCR is written whilst busy. If it is, then a busy detect interrupt is
* raised, the LCR needs to be rewritten and the uart status register read.
@@ -256,25 +252,31 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
struct ktermios *old)
{
unsigned int baud = tty_termios_baud_rate(termios);
+ unsigned int target_rate, min_rate, max_rate;
struct dw8250_data *d = p->private_data;
long rate;
- int ret;
+ int i, ret;
if (IS_ERR(d->clk) || !old)
goto out;
- clk_disable_unprepare(d->clk);
- rate = clk_round_rate(d->clk, baud * 16);
- if (rate < 0)
- ret = rate;
- else if (rate == 0)
- ret = -ENOENT;
- else
- ret = clk_set_rate(d->clk, rate);
- clk_prepare_enable(d->clk);
+ /* Find a clk rate within +/-1.6% of an integer multiple of baudx16 */
+ target_rate = baud * 16;
+ min_rate = target_rate - (target_rate >> 6);
+ max_rate = target_rate + (target_rate >> 6);
- if (!ret)
- p->uartclk = rate;
+ for (i = 1; i <= UART_DIV_MAX; i++) {
+ rate = clk_round_rate(d->clk, i * target_rate);
+ if (rate >= i * min_rate && rate <= i * max_rate)
+ break;
+ }
+ if (i <= UART_DIV_MAX) {
+ clk_disable_unprepare(d->clk);
+ ret = clk_set_rate(d->clk, rate);
+ clk_prepare_enable(d->clk);
+ if (!ret)
+ p->uartclk = rate;
+ }
out:
p->status &= ~UPSTAT_AUTOCTS;
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index af72ec32e404..362c25ff188a 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Early serial console for 8250/16550 devices
*
* (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
* and on early_printk.c by Andi Kleen.
*
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 0b6381214917..f6a86f2bc4e5 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Renesas Emma Mobile 8250 driver
*
* Copyright (C) 2012 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/device.h>
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index c55624703fdf..a402878c9f30 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Probe module for 8250/16550-type Exar chips PCI serial ports.
*
* Based on drivers/tty/serial/8250/8250_pci.c,
*
* Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
*/
#include <linux/acpi.h>
#include <linux/dmi.h>
diff --git a/drivers/tty/serial/8250/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c
index 3a7cb8262bb9..933811ebfaac 100644
--- a/drivers/tty/serial/8250/8250_exar_st16c554.c
+++ b/drivers/tty/serial/8250/8250_exar_st16c554.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com >
* Based on 8250_boca.
*
* Copyright (C) 2005 Russell King.
* Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index e500f7dd2470..79a4958b3f5c 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Probe for F81216A LPC to 4 UART
*
* Copyright (C) 2014-2016 Ricardo Ribalda, Qtechnology A/S
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
*/
#include <linux/module.h>
#include <linux/pci.h>
@@ -40,6 +36,16 @@
#define IRQ_LEVEL_LOW 0
#define IRQ_EDGE_HIGH BIT(5)
+/*
+ * F81216H clock source register, the value and mask is the same with F81866,
+ * but it's on F0h.
+ *
+ * Clock speeds for UART (register F0h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
+ */
#define RS485 0xF0
#define RTS_INVERT BIT(5)
#define RS485_URA BIT(4)
@@ -118,6 +124,9 @@ static int fintek_8250_enter_key(u16 base_port, u8 key)
if (!request_muxed_region(base_port, 2, "8250_fintek"))
return -EBUSY;
+ /* Force to deactive all SuperIO in this base_port */
+ outb(EXIT_KEY, base_port + ADDR_PORT);
+
outb(key, base_port + ADDR_PORT);
outb(key, base_port + ADDR_PORT);
return 0;
@@ -188,14 +197,27 @@ static int fintek_8250_rs485_config(struct uart_port *port,
if (!pdata)
return -EINVAL;
- if (rs485->flags & SER_RS485_ENABLED)
+ /* Hardware do not support same RTS level on send and receive */
+ if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+ !(rs485->flags & SER_RS485_RTS_AFTER_SEND))
+ return -EINVAL;
+
+ if (rs485->flags & SER_RS485_ENABLED) {
memset(rs485->padding, 0, sizeof(rs485->padding));
- else
+ config |= RS485_URA;
+ } else {
memset(rs485, 0, sizeof(*rs485));
+ }
rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
SER_RS485_RTS_AFTER_SEND;
+ /* Only the first port supports delays */
+ if (pdata->index) {
+ rs485->delay_rts_before_send = 0;
+ rs485->delay_rts_after_send = 0;
+ }
+
if (rs485->delay_rts_before_send) {
rs485->delay_rts_before_send = 1;
config |= TXW4C_IRA;
@@ -206,12 +228,6 @@ static int fintek_8250_rs485_config(struct uart_port *port,
config |= RXW4C_IRA;
}
- if ((!!(rs485->flags & SER_RS485_RTS_ON_SEND)) ==
- (!!(rs485->flags & SER_RS485_RTS_AFTER_SEND)))
- rs485->flags &= SER_RS485_ENABLED;
- else
- config |= RS485_URA;
-
if (rs485->flags & SER_RS485_RTS_ON_SEND)
config |= RTS_INVERT;
@@ -280,13 +296,91 @@ static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
F81866_UART_CLK_MASK,
F81866_UART_CLK_14_769MHZ);
- uart->port.uartclk = 921600 * 16;
+ uart->port.uartclk = 921600 * 16;
break;
default: /* leave clock speed untouched */
break;
}
}
+void fintek_8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct fintek_8250 *pdata = port->private_data;
+ unsigned int baud = tty_termios_baud_rate(termios);
+ int i;
+ u8 reg;
+ static u32 baudrate_table[] = {115200, 921600, 1152000, 1500000};
+ static u8 clock_table[] = { F81866_UART_CLK_1_8432MHZ,
+ F81866_UART_CLK_14_769MHZ, F81866_UART_CLK_18_432MHZ,
+ F81866_UART_CLK_24MHZ };
+
+ /*
+ * We'll use serial8250_do_set_termios() for baud = 0, otherwise It'll
+ * crash on baudrate_table[i] % baud with "division by zero".
+ */
+ if (!baud)
+ goto exit;
+
+ switch (pdata->pid) {
+ case CHIP_ID_F81216H:
+ reg = RS485;
+ break;
+ case CHIP_ID_F81866:
+ reg = F81866_UART_CLK;
+ break;
+ default:
+ /* Don't change clocksource with unknown PID */
+ dev_warn(port->dev,
+ "%s: pid: %x Not support. use default set_termios.\n",
+ __func__, pdata->pid);
+ goto exit;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
+ if (baud > baudrate_table[i] || baudrate_table[i] % baud != 0)
+ continue;
+
+ if (port->uartclk == baudrate_table[i] * 16)
+ break;
+
+ if (fintek_8250_enter_key(pdata->base_port, pdata->key))
+ continue;
+
+ port->uartclk = baudrate_table[i] * 16;
+
+ sio_write_reg(pdata, LDN, pdata->index);
+ sio_write_mask_reg(pdata, reg, F81866_UART_CLK_MASK,
+ clock_table[i]);
+
+ fintek_8250_exit_key(pdata->base_port);
+ break;
+ }
+
+ if (i == ARRAY_SIZE(baudrate_table)) {
+ baud = tty_termios_baud_rate(old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ }
+
+exit:
+ serial8250_do_set_termios(port, termios, old);
+}
+
+static void fintek_8250_set_termios_handler(struct uart_8250_port *uart)
+{
+ struct fintek_8250 *pdata = uart->port.private_data;
+
+ switch (pdata->pid) {
+ case CHIP_ID_F81216H:
+ case CHIP_ID_F81866:
+ uart->port.set_termios = fintek_8250_set_termios;
+ break;
+
+ default:
+ break;
+ }
+}
+
static int probe_setup_port(struct fintek_8250 *pdata,
struct uart_8250_port *uart)
{
@@ -373,6 +467,7 @@ int fintek_8250_probe(struct uart_8250_port *uart)
memcpy(pdata, &probe_data, sizeof(probe_data));
uart->port.private_data = pdata;
fintek_8250_set_rs485_handler(uart);
+ fintek_8250_set_termios_handler(uart);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c
index 4045180a8cfc..3215b9b7afde 100644
--- a/drivers/tty/serial/8250/8250_fourport.c
+++ b/drivers/tty/serial/8250/8250_fourport.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2005 Russell King.
* Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index 910bfee5a88b..6640a4c7ddd1 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
#include <linux/serial_reg.h>
#include <linux/serial_8250.h>
@@ -6,10 +7,6 @@
/*
* Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* This isn't a full driver; it just provides an alternate IRQ
* handler to deal with an errata. Everything else is just
* using the bog standard 8250 support.
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index df2931e1e086..0809ae2aa9b1 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Serial Device Initialisation for Lasi/Asp/Wax/Dino
*
* (c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/errno.h>
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index 115190b7962a..3012ea03d22c 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for the 98626/98644/internal serial interface on hp300/hp400
* (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs)
diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
index 27124e21eb96..273f59b9bca5 100644
--- a/drivers/tty/serial/8250/8250_hub6.c
+++ b/drivers/tty/serial/8250/8250_hub6.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2005 Russell King.
* Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 464389b28900..6af84900870e 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2010 Lars-Peter Clausen <lars@metafoo.de>
* Copyright (C) 2015 Imagination Technologies
*
* Ingenic SoC UART support
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/clk.h>
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 99cd478851ff..eddf119374e1 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Serial port driver for NXP LPC18xx/43xx UART
*
@@ -6,11 +7,6 @@
* Based on 8250_mtk.c:
* Copyright (c) 2014 MundoReader S.L.
* Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/clk.h>
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 7dddd7e6a01c..98dbc796353f 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* 8250_lpss.c - Driver for UART on Intel Braswell and various other Intel SoCs
*
* Copyright (C) 2016 Intel Corporation
* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/bitops.h>
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index ec957cce8c9a..efa0515139f8 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* 8250_mid.c - Driver for UART on Intel Penwell and various other Intel SOCs
*
* Copyright (C) 2015 Intel Corporation
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/bitops.h>
@@ -23,10 +20,11 @@
#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c
#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d
#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191
+#define PCI_DEVICE_ID_INTEL_CDF_UART 0x18d8
#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8
/* Intel MID Specific registers */
-#define INTEL_MID_UART_DNV_FISR 0x08
+#define INTEL_MID_UART_FISR 0x08
#define INTEL_MID_UART_PS 0x30
#define INTEL_MID_UART_MUL 0x34
#define INTEL_MID_UART_DIV 0x38
@@ -130,7 +128,7 @@ static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
struct uart_8250_port *up = up_to_u8250p(p);
- unsigned int fisr = serial_port_in(p, INTEL_MID_UART_DNV_FISR);
+ unsigned int fisr = serial_port_in(p, INTEL_MID_UART_FISR);
u32 status;
int ret = 0;
int err;
@@ -377,6 +375,7 @@ static const struct pci_device_id pci_ids[] = {
MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board),
MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board),
MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_CDF_UART, dnv_board),
MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board),
{ },
};
diff --git a/drivers/tty/serial/8250/8250_moxa.c b/drivers/tty/serial/8250/8250_moxa.c
index d5069b2d4d79..1ee4cd94d4fa 100644
--- a/drivers/tty/serial/8250/8250_moxa.c
+++ b/drivers/tty/serial/8250/8250_moxa.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
*
* Author: Mathieu OTHACEHE <m.othacehe@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index fb45770d47aa..dd5e1cede2b5 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Mediatek 8250 driver.
*
* Copyright (c) 2014 MundoReader S.L.
* Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/io.h>
@@ -61,7 +52,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
* registers to their default values.
*/
baud = uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / 0xffff,
+ port->uartclk / 16 / UART_DIV_MAX,
port->uartclk);
if (baud <= 115200) {
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 1222c005fb98..1e67a7e4a5fd 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Serial Port driver for Open Firmware platform devices
*
* Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
*/
#include <linux/console.h>
#include <linux/module.h>
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 833771bca0a5..bd40ba402410 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* 8250-core based driver for the OMAP internal UART
*
@@ -199,7 +200,7 @@ static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud,
* Old custom speed handling.
*/
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) {
- priv->quot = port->custom_divisor & 0xffff;
+ priv->quot = port->custom_divisor & UART_DIV_MAX;
/*
* I assume that nobody is using this. But hey, if somebody
* would like to specify the divisor _and_ the mode then the
@@ -358,7 +359,7 @@ static void omap_8250_set_termios(struct uart_port *port,
* Ask the core to calculate the divisor for us.
*/
baud = uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / 0xffff,
+ port->uartclk / 16 / UART_DIV_MAX,
port->uartclk / 13);
omap_8250_get_divisor(port, baud, priv);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 0c101a7470b0..b7e0e3416641 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Probe module for 8250/16550-type PCI serial ports.
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
* Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
*/
#undef DEBUG
#include <linux/module.h>
@@ -3368,6 +3365,7 @@ static const struct pci_device_id blacklist[] = {
{ PCI_VDEVICE(INTEL, 0x081c), },
{ PCI_VDEVICE(INTEL, 0x081d), },
{ PCI_VDEVICE(INTEL, 0x1191), },
+ { PCI_VDEVICE(INTEL, 0x18d8), },
{ PCI_VDEVICE(INTEL, 0x19d8), },
/* Intel platforms with DesignWare UART */
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 34f05ed78b68..431e69a5a6a0 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Probe for 8250/16550-type ISAPNP serial ports.
*
@@ -6,10 +7,6 @@
* Copyright (C) 2001 Russell King, All Rights Reserved.
*
* Ported to the Linux PnP Layer - (C) Adam Belay.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
*/
#include <linux/module.h>
#include <linux/pci.h>
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index f0cc04f62b67..11434551ac0a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Base port operations for 8250/16550-type serial ports
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
* Split from 8250_core.c, Copyright (C) 2001 Russell King.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* A note about mapbase / membase
*
* mapbase is the physical address of the IO port.
@@ -1516,7 +1512,6 @@ static inline void __stop_tx(struct uart_8250_port *p)
return;
em485->active_timer = NULL;
- hrtimer_cancel(&em485->start_tx_timer);
__stop_tx_rs485(p);
}
@@ -1580,8 +1575,6 @@ static inline void start_tx_rs485(struct uart_port *port)
serial8250_stop_rx(&up->port);
em485->active_timer = NULL;
- if (hrtimer_is_queued(&em485->stop_tx_timer))
- hrtimer_cancel(&em485->stop_tx_timer);
mcr = serial8250_in_MCR(up);
if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) !=
@@ -2586,8 +2579,11 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
serial_dl_write(up, quot);
/* XR17V35x UARTs have an extra fractional divisor register (DLD) */
- if (up->port.type == PORT_XR17V35X)
+ if (up->port.type == PORT_XR17V35X) {
+ /* Preserve bits not related to baudrate; DLD[7:4]. */
+ quot_frac |= serial_port_in(port, 0x2) & 0xf0;
serial_port_out(port, 0x2, quot_frac);
+ }
}
static unsigned int serial8250_get_baud_rate(struct uart_port *port,
@@ -2601,7 +2597,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
* causing transmission errors.
*/
return uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / 0xffff,
+ port->uartclk / 16 / UART_DIV_MAX,
port->uartclk);
}
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index 4d68731af534..b9bcbe20a2be 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* drivers/tty/serial/8250/8250_pxa.c -- driver for PXA on-board UARTS
* Copyright: (C) 2013 Sergei Ianovich <ynvich@gmail.com>
@@ -7,12 +8,6 @@
* Copyright: (C) 2003 Monta Vista Software, Inc.
*
* Based on drivers/serial/8250.c by Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
*/
#include <linux/device.h>
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 8a10b10e27aa..45ef506293ae 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/clk.h>
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 933c2688dd7e..9963a766dcfb 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
/*======================================================================
A driver for PCMCIA serial devices
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 0475f5d261ce..c90e503d6b57 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* altera_jtaguart.c -- Altera JTAG UART driver
*
@@ -6,11 +7,6 @@
* (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
* (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
* (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/kernel.h>
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 3e4b717670d7..b88b05f8e81e 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* altera_uart.c -- Altera UART driver
*
@@ -6,11 +7,6 @@
* (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com>
* (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw>
* (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/kernel.h>
@@ -288,10 +284,10 @@ static irqreturn_t altera_uart_interrupt(int irq, void *data)
return IRQ_RETVAL(isr);
}
-static void altera_uart_timer(unsigned long data)
+static void altera_uart_timer(struct timer_list *t)
{
- struct uart_port *port = (void *)data;
- struct altera_uart *pp = container_of(port, struct altera_uart, port);
+ struct altera_uart *pp = from_timer(pp, t, tmr);
+ struct uart_port *port = &pp->port;
altera_uart_interrupt(0, port);
mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
@@ -314,7 +310,7 @@ static int altera_uart_startup(struct uart_port *port)
int ret;
if (!port->irq) {
- setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port);
+ timer_setup(&pp->tmr, altera_uart_timer, 0);
mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port));
return 0;
}
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 9ec4b8d2879f..2c37d11726ab 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for AMBA serial ports
*
@@ -6,20 +7,6 @@
* Copyright 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
* This is a generic driver for ARM AMBA-type serial ports. They
* have a lot of 16550-like features, but are not register compatible.
* Note that although they do have CTS, DCD and DSR inputs, they do
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 111e6a950779..04af8de8617e 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for AMBA serial ports
*
@@ -7,20 +8,6 @@
* Copyright (C) 2000 Deep Blue Solutions Ltd.
* Copyright (C) 2010 ST-Ericsson SA
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
* This is a generic driver for ARM AMBA-type serial ports. They
* have a lot of 16550-like features, but are not register compatible.
* Note that although they do have CTS, DCD and DSR inputs, they do
@@ -281,7 +268,6 @@ struct uart_amba_port {
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
- bool autorts;
unsigned int fixed_baud; /* vendor-set fixed baud rate */
char type[12];
#ifdef CONFIG_DMA_ENGINE
@@ -1078,9 +1064,9 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
* Every polling, It checks the residue in the dma buffer and transfer
* data to the tty. Also, last_residue is updated for the next polling.
*/
-static void pl011_dma_rx_poll(unsigned long args)
+static void pl011_dma_rx_poll(struct timer_list *t)
{
- struct uart_amba_port *uap = (struct uart_amba_port *)args;
+ struct uart_amba_port *uap = from_timer(uap, t, dmarx.timer);
struct tty_port *port = &uap->port.state->port;
struct pl011_dmarx_data *dmarx = &uap->dmarx;
struct dma_chan *rxchan = uap->dmarx.chan;
@@ -1192,9 +1178,7 @@ skip_rx:
dev_dbg(uap->port.dev, "could not trigger initial "
"RX DMA job, fall back to interrupt mode\n");
if (uap->dmarx.poll_rate) {
- init_timer(&(uap->dmarx.timer));
- uap->dmarx.timer.function = pl011_dma_rx_poll;
- uap->dmarx.timer.data = (unsigned long)uap;
+ timer_setup(&uap->dmarx.timer, pl011_dma_rx_poll, 0);
mod_timer(&uap->dmarx.timer,
jiffies +
msecs_to_jiffies(uap->dmarx.poll_rate));
@@ -1588,7 +1572,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2);
TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE);
- if (uap->autorts) {
+ if (port->status & UPSTAT_AUTORTS) {
/* We need to disable auto-RTS if we want to turn RTS off */
TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN);
}
@@ -1842,7 +1826,7 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
{
unsigned int cr;
- uap->autorts = false;
+ uap->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
spin_lock_irq(&uap->port.lock);
cr = pl011_read(uap, REG_CR);
uap->old_cr = cr;
@@ -2028,10 +2012,10 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
old_cr |= UART011_CR_RTSEN;
old_cr |= UART011_CR_CTSEN;
- uap->autorts = true;
+ port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
} else {
old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN);
- uap->autorts = false;
+ port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
}
if (uap->vendor->oversampling) {
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index dd60ed96a0ad..60cd133ffbbc 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for GRLIB serial ports (APBUART)
*
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index decc7f3c1ab2..db5df3d54818 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Atheros AR933X SoC built-in UART driver
*
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 77fe306690c4..2599f9ecccfe 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* ARC On-Chip(fpga) UART Driver
*
* Copyright (C) 2010-2012 Synopsys, Inc. (www.synopsys.com)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* vineetg: July 10th 2012
* -Decoupled the driver from arch/arc
* +Using platform_get_resource() for irq/membase (thx to bfin_uart.c)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 7551cab438ff..efa25611ca0c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Atmel AT91 Serial ports
* Copyright (C) 2003 Rick Bronson
@@ -6,21 +7,6 @@
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
* DMA support added by Chip Coldwell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/tty.h>
#include <linux/ioport.h>
@@ -171,6 +157,7 @@ struct atmel_uart_port {
bool has_hw_timer;
struct timer_list uart_timer;
+ bool tx_stopped;
bool suspended;
unsigned int pending;
unsigned int pending_status;
@@ -380,6 +367,10 @@ static int atmel_config_rs485(struct uart_port *port,
*/
static u_int atmel_tx_empty(struct uart_port *port)
{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (atmel_port->tx_stopped)
+ return TIOCSER_TEMT;
return (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXEMPTY) ?
TIOCSER_TEMT :
0;
@@ -485,6 +476,7 @@ static void atmel_stop_tx(struct uart_port *port)
* is fully transmitted.
*/
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS);
+ atmel_port->tx_stopped = true;
/* Disable interrupts */
atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
@@ -521,6 +513,7 @@ static void atmel_start_tx(struct uart_port *port)
/* re-enable the transmitter */
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN);
+ atmel_port->tx_stopped = false;
}
/*
@@ -1178,10 +1171,11 @@ chan_err:
return -EINVAL;
}
-static void atmel_uart_timer_callback(unsigned long data)
+static void atmel_uart_timer_callback(struct timer_list *t)
{
- struct uart_port *port = (void *)data;
- struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct atmel_uart_port *atmel_port = from_timer(atmel_port, t,
+ uart_timer);
+ struct uart_port *port = &atmel_port->uart;
if (!atomic_read(&atmel_port->tasklet_shutdown)) {
tasklet_schedule(&atmel_port->tasklet_rx);
@@ -1667,29 +1661,6 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port,
}
}
-static void atmel_init_rs485(struct uart_port *port,
- struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
-
- struct serial_rs485 *rs485conf = &port->rs485;
- u32 rs485_delay[2];
-
- /* rs485 properties */
- if (of_property_read_u32_array(np, "rs485-rts-delay",
- rs485_delay, 2) == 0) {
- rs485conf->delay_rts_before_send = rs485_delay[0];
- rs485conf->delay_rts_after_send = rs485_delay[1];
- rs485conf->flags = 0;
- }
-
- if (of_get_property(np, "rs485-rx-during-tx", NULL))
- rs485conf->flags |= SER_RS485_RX_DURING_TX;
-
- if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
- rs485conf->flags |= SER_RS485_ENABLED;
-}
-
static void atmel_set_ops(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -1866,10 +1837,9 @@ static int atmel_startup(struct uart_port *port)
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
/* enable xmit & rcvr */
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ atmel_port->tx_stopped = false;
- setup_timer(&atmel_port->uart_timer,
- atmel_uart_timer_callback,
- (unsigned long)port);
+ timer_setup(&atmel_port->uart_timer, atmel_uart_timer_callback, 0);
if (atmel_use_pdc_rx(port)) {
/* set UART timeout */
@@ -2122,6 +2092,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
/* disable receiver and transmitter */
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+ atmel_port->tx_stopped = true;
/* mode */
if (port->rs485.flags & SER_RS485_ENABLED) {
@@ -2207,6 +2178,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
atmel_uart_writel(port, ATMEL_US_BRGR, quot);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ atmel_port->tx_stopped = false;
/* restore interrupts */
atmel_uart_writel(port, ATMEL_US_IER, imr);
@@ -2373,7 +2345,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_init_property(atmel_port, pdev);
atmel_set_ops(port);
- atmel_init_rs485(port, pdev);
+ of_get_rs485_mode(pdev->dev.of_node, &port->rs485);
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
@@ -2450,6 +2422,7 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
/* Make sure that tx path is actually able to send characters */
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN);
+ atmel_port->tx_stopped = false;
uart_console_write(port, s, count, atmel_console_putchar);
@@ -2511,6 +2484,7 @@ static int __init atmel_console_setup(struct console *co, char *options)
{
int ret;
struct uart_port *port = &atmel_ports[co->index].uart;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int baud = 115200;
int bits = 8;
int parity = 'n';
@@ -2528,6 +2502,7 @@ static int __init atmel_console_setup(struct console *co, char *options)
atmel_uart_writel(port, ATMEL_US_IDR, -1);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ atmel_port->tx_stopped = false;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/tty/serial/atmel_serial.h b/drivers/tty/serial/atmel_serial.h
index bd2560502f3c..ba3a2437cde4 100644
--- a/drivers/tty/serial/atmel_serial.h
+++ b/drivers/tty/serial/atmel_serial.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* include/linux/atmel_serial.h
*
@@ -6,11 +7,6 @@
*
* USART registers.
* Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef ATMEL_SERIAL_H
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 8c48c3784831..9d1b7bf7378c 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
* Derived from many drivers using generic_serial interface.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index 6b03fb12cd19..4ccca5d22f4f 100644
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Blackfin On-Chip Sport Emulated UART Driver
*
* Copyright 2006-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
*/
/*
@@ -584,7 +583,7 @@ static void sport_set_termios(struct uart_port *port,
spin_unlock_irqrestore(&up->port.lock, flags);
}
-struct uart_ops sport_uart_ops = {
+static const struct uart_ops sport_uart_ops = {
.tx_empty = sport_tx_empty,
.set_mctrl = sport_set_mctrl,
.get_mctrl = sport_get_mctrl,
diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h
index e4510ea135ce..4b12f45d6580 100644
--- a/drivers/tty/serial/bfin_sport_uart.h
+++ b/drivers/tty/serial/bfin_sport_uart.h
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Blackfin On-Chip Sport Emulated UART Driver
*
* Copyright 2006-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
*/
/*
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 293ecbb00684..4755fa696321 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Blackfin On-Chip Serial Driver
*
* Copyright 2006-2011 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
*/
#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -456,8 +455,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
tty_flip_buffer_push(&uart->port.state->port);
}
-void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
+void bfin_serial_rx_dma_timeout(struct timer_list *t)
{
+ struct bfin_serial_port *uart = from_timer(uart, t, rx_dma_timer);
int x_pos, pos;
unsigned long flags;
@@ -624,8 +624,6 @@ static int bfin_serial_startup(struct uart_port *port)
set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf);
enable_dma(uart->rx_dma_channel);
- uart->rx_dma_timer.data = (unsigned long)(uart);
- uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout;
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
#else
@@ -1316,7 +1314,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
}
uart->rx_dma_channel = res->start;
- init_timer(&(uart->rx_dma_timer));
+ timer_setup(&uart->rx_dma_timer, bfin_serial_rx_dma_timeout, 0);
#endif
#if defined(SERIAL_BFIN_CTSRTS) || \
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index ac1328629baa..98f193a83392 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for CLPS711x serial ports
*
@@ -5,11 +6,6 @@
*
* Copyright 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h
index 0ad027b95873..9f175a92fb5d 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart.h
+++ b/drivers/tty/serial/cpm_uart/cpm_uart.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for CPM (SCC/SMC) serial ports
*
@@ -5,11 +6,6 @@
*
* 2006 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
*/
#ifndef CPM_UART_H
#define CPM_UART_H
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 9ac142cfc1f1..24a5f05e769b 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for CPM (SCC/SMC) serial ports; core driver
*
@@ -12,21 +13,6 @@
* (C) 2004 Intracom, S.A.
* (C) 2005-2006 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c
index 6d3b22e93246..4eba17f3d293 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
*
@@ -8,21 +9,6 @@
* (C) 2004 Intracom, S.A.
* (C) 2006 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
index f46d2ca87209..e3bff068dc3c 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
*
@@ -8,21 +9,6 @@
* (C) 2004 Intracom, S.A.
* (C) 2006 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index 02ad6953b167..f460cca139e2 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Conexant Digicolor serial ports (USART)
*
* Author: Baruch Siach <baruch@tkos.co.il>
*
* Copyright (C) 2014 Paradox Innovation Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
index ff465ff43577..7b57e840e255 100644
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* dz.c: Serial port driver for DECstations equipped
* with the DZ chipset.
diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-arm-semihost.c
index 6bbeb699777c..fa096c10b591 100644
--- a/drivers/tty/serial/earlycon-arm-semihost.c
+++ b/drivers/tty/serial/earlycon-arm-semihost.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012 ARM Ltd.
* Author: Marc Zyngier <marc.zyngier@arm.com>
@@ -5,18 +6,6 @@
* Adapted for ARM and earlycon:
* Copyright (C) 2014 Linaro Ltd.
* Author: Rob Herring <robh@kernel.org>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/console.h>
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 98928f082d87..4c8b80f1c688 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014 Linaro Ltd.
* Author: Rob Herring <robh@kernel.org>
@@ -5,10 +6,6 @@
* Based on 8250 earlycon:
* (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
* Bjorn Helgaas <bjorn.helgaas@hp.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 9fff25be87f9..d6b5e5463746 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
#if defined(CONFIG_SERIAL_EFM32_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index f0252184291e..c84e6f0db54e 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Freescale lpuart serial port driver
*
* Copyright 2012-2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -1632,12 +1628,11 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
unsigned long flags;
- unsigned long ctrl, old_ctrl, bd, modem;
+ unsigned long ctrl, old_ctrl, modem;
unsigned int baud;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
- bd = lpuart32_read(&sport->port, UARTBAUD);
modem = lpuart32_read(&sport->port, UARTMODIR);
/*
* only support CS8 and CS7, and for CS7 must enable PE.
@@ -2212,6 +2207,24 @@ static int lpuart_probe(struct platform_device *pdev)
if (ret)
goto failed_attach_port;
+ of_get_rs485_mode(np, &sport->port.rs485);
+
+ if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) {
+ dev_err(&pdev->dev, "driver doesn't support RX during TX\n");
+ return -ENOSYS;
+ }
+
+ if (sport->port.rs485.delay_rts_before_send ||
+ sport->port.rs485.delay_rts_after_send) {
+ dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
+ return -ENOSYS;
+ }
+
+ if (sport->port.rs485.flags & SER_RS485_ENABLED) {
+ sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
+ writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
+ }
+
sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
if (!sport->dma_tx_chan)
dev_info(sport->port.dev, "DMA tx channel request failed, "
@@ -2222,12 +2235,6 @@ static int lpuart_probe(struct platform_device *pdev)
dev_info(sport->port.dev, "DMA rx channel request failed, "
"operating without rx DMA\n");
- if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time")) {
- sport->port.rs485.flags |= SER_RS485_ENABLED;
- sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
- writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
- }
-
return 0;
failed_attach_port:
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index fe92d74f4ea5..ad374f7c476d 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* icom.c
*
@@ -6,21 +7,6 @@
* Serial device driver.
*
* Based on code from serial.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/module.h>
#include <linux/kernel.h>
diff --git a/drivers/tty/serial/icom.h b/drivers/tty/serial/icom.h
index c8029e0025c9..8a77e739b333 100644
--- a/drivers/tty/serial/icom.h
+++ b/drivers/tty/serial/icom.h
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* icom.h
*
* Copyright (C) 2001 Michael Anderson, IBM Corporation
*
* Serial device driver include file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/serial_core.h>
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index f190a84a0246..473f4f81d690 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/****************************************************************************
*
* Driver for the IFX 6x60 spi modem.
@@ -10,20 +11,6 @@
* Copyright (C) 2009, 2010 Intel Corp
* Russ Gorby <russ.gorby@intel.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA
- *
* Driver modified by Intel from Option gtm501l_spi.c
*
* Notes
@@ -1029,9 +1016,8 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
spin_lock_init(&ifx_dev->write_lock);
spin_lock_init(&ifx_dev->power_lock);
ifx_dev->power_status = 0;
- init_timer(&ifx_dev->spi_timer);
- ifx_dev->spi_timer.function = ifx_spi_timeout;
- ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
+ setup_timer(&ifx_dev->spi_timer, ifx_spi_timeout,
+ (unsigned long)ifx_dev);
ifx_dev->modem = pl_data->modem_type;
ifx_dev->use_dma = pl_data->use_dma;
ifx_dev->max_hz = pl_data->max_hz;
diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h
index 4fbddc297839..c5a2514212ff 100644
--- a/drivers/tty/serial/ifx6x60.h
+++ b/drivers/tty/serial/ifx6x60.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/****************************************************************************
*
* Driver for the IFX spi modem.
@@ -5,23 +6,6 @@
* Copyright (C) 2009, 2010 Intel Corp
* Jim Stanley <jim.stanley@intel.com>
*
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA
- *
- *
- *
*****************************************************************************/
#ifndef _IFX6X60_H
#define _IFX6X60_H
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dfeff3951f93..a67a606c38eb 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Motorola/Freescale IMX serial ports
*
@@ -5,16 +6,6 @@
*
* Author: Sascha Hauer <sascha@saschahauer.de>
* Copyright (C) 2004 Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -334,7 +325,8 @@ static void imx_port_rts_active(struct imx_port *sport, unsigned long *ucr2)
{
*ucr2 &= ~(UCR2_CTSC | UCR2_CTS);
- mctrl_gpio_set(sport->gpios, sport->port.mctrl | TIOCM_RTS);
+ sport->port.mctrl |= TIOCM_RTS;
+ mctrl_gpio_set(sport->gpios, sport->port.mctrl);
}
static void imx_port_rts_inactive(struct imx_port *sport, unsigned long *ucr2)
@@ -342,7 +334,8 @@ static void imx_port_rts_inactive(struct imx_port *sport, unsigned long *ucr2)
*ucr2 &= ~UCR2_CTSC;
*ucr2 |= UCR2_CTS;
- mctrl_gpio_set(sport->gpios, sport->port.mctrl & ~TIOCM_RTS);
+ sport->port.mctrl &= ~TIOCM_RTS;
+ mctrl_gpio_set(sport->gpios, sport->port.mctrl);
}
static void imx_port_rts_auto(struct imx_port *sport, unsigned long *ucr2)
@@ -714,8 +707,6 @@ static void imx_disable_rx_int(struct imx_port *sport)
{
unsigned long temp;
- sport->dma_is_rxing = 1;
-
/* disable the receiver ready and aging timer interrupts */
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RRDYEN);
@@ -732,29 +723,6 @@ static void imx_disable_rx_int(struct imx_port *sport)
}
static void clear_rx_errors(struct imx_port *sport);
-static int start_rx_dma(struct imx_port *sport);
-/*
- * If the RXFIFO is filled with some data, and then we
- * arise a DMA operation to receive them.
- */
-static void imx_dma_rxint(struct imx_port *sport)
-{
- unsigned long temp;
- unsigned long flags;
-
- spin_lock_irqsave(&sport->port.lock, flags);
-
- temp = readl(sport->port.membase + USR2);
- if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
-
- imx_disable_rx_int(sport);
-
- /* tell the DMA to receive the data. */
- start_rx_dma(sport);
- }
-
- spin_unlock_irqrestore(&sport->port.lock, flags);
-}
/*
* We have a modem side uart, so the meanings of RTS and CTS are inverted.
@@ -816,11 +784,8 @@ static irqreturn_t imx_int(int irq, void *dev_id)
sts = readl(sport->port.membase + USR1);
sts2 = readl(sport->port.membase + USR2);
- if (sts & (USR1_RRDY | USR1_AGTIM)) {
- if (sport->dma_is_enabled)
- imx_dma_rxint(sport);
- else
- imx_rxint(irq, dev_id);
+ if (!sport->dma_is_enabled && (sts & (USR1_RRDY | USR1_AGTIM))) {
+ imx_rxint(irq, dev_id);
ret = IRQ_HANDLED;
}
@@ -1074,6 +1039,7 @@ static int start_rx_dma(struct imx_port *sport)
desc->callback_param = sport;
dev_dbg(dev, "RX: prepare for the DMA.\n");
+ sport->dma_is_rxing = 1;
sport->rx_cookie = dmaengine_submit(desc);
dma_async_issue_pending(chan);
return 0;
@@ -1165,7 +1131,7 @@ static int imx_uart_dma_init(struct imx_port *sport)
goto err;
}
- sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ sport->rx_buf = kzalloc(RX_BUF_SIZE, GFP_KERNEL);
if (!sport->rx_buf) {
ret = -ENOMEM;
goto err;
@@ -1207,10 +1173,6 @@ static void imx_enable_dma(struct imx_port *sport)
temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN;
writel(temp, sport->port.membase + UCR1);
- temp = readl(sport->port.membase + UCR2);
- temp |= UCR2_ATEN;
- writel(temp, sport->port.membase + UCR2);
-
imx_setup_ufcr(sport, TXTL_DMA, RXTL_DMA);
sport->dma_is_enabled = 1;
@@ -1411,15 +1373,19 @@ static void imx_flush_buffer(struct uart_port *port)
temp = readl(sport->port.membase + UCR1);
temp &= ~UCR1_TDMAEN;
writel(temp, sport->port.membase + UCR1);
- sport->dma_is_txing = false;
+ sport->dma_is_txing = 0;
}
/*
* According to the Reference Manual description of the UART SRST bit:
+ *
* "Reset the transmit and receive state machines,
* all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD
- * and UTS[6-3]". As we don't need to restore the old values from
- * USR1, USR2, URXD, UTXD, only save/restore the other four registers
+ * and UTS[6-3]".
+ *
+ * We don't need to restore the old values from USR1, USR2, URXD and
+ * UTXD. UBRC is read only, so only save/restore the other three
+ * registers.
*/
ubir = readl(sport->port.membase + UBIR);
ubmr = readl(sport->port.membase + UBMR);
@@ -2051,6 +2017,8 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "rts-gpios", NULL))
sport->have_rtsgpio = 1;
+ of_get_rs485_mode(np, &sport->port.rs485);
+
return 0;
}
#else
@@ -2112,12 +2080,9 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.fifosize = 32;
sport->port.ops = &imx_pops;
sport->port.rs485_config = imx_rs485_config;
- sport->port.rs485.flags =
- SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX;
+ sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
sport->port.flags = UPF_BOOT_AUTOCONF;
- init_timer(&sport->timer);
- sport->timer.function = imx_timeout;
- sport->timer.data = (unsigned long)sport;
+ setup_timer(&sport->timer, imx_timeout, (unsigned long)sport);
sport->gpios = mctrl_gpio_init(&sport->port, 0);
if (IS_ERR(sport->gpios))
@@ -2346,11 +2311,39 @@ static int imx_serial_port_resume(struct device *dev)
return 0;
}
+static int imx_serial_port_freeze(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_port *sport = platform_get_drvdata(pdev);
+
+ uart_suspend_port(&imx_reg, &sport->port);
+
+ /* Needed to enable clock in suspend_noirq */
+ return clk_prepare(sport->clk_ipg);
+}
+
+static int imx_serial_port_thaw(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_port *sport = platform_get_drvdata(pdev);
+
+ uart_resume_port(&imx_reg, &sport->port);
+
+ clk_unprepare(sport->clk_ipg);
+
+ return 0;
+}
+
static const struct dev_pm_ops imx_serial_port_pm_ops = {
.suspend_noirq = imx_serial_port_suspend_noirq,
.resume_noirq = imx_serial_port_resume_noirq,
+ .freeze_noirq = imx_serial_port_suspend_noirq,
+ .restore_noirq = imx_serial_port_resume_noirq,
.suspend = imx_serial_port_suspend,
.resume = imx_serial_port_resume,
+ .freeze = imx_serial_port_freeze,
+ .thaw = imx_serial_port_thaw,
+ .restore = imx_serial_port_thaw,
};
static struct platform_driver serial_imx_driver = {
diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c
index 906ee770ff4a..d8a1cdd6a53d 100644
--- a/drivers/tty/serial/ioc3_serial.c
+++ b/drivers/tty/serial/ioc3_serial.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
* Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved.
*/
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index 43d7d32eb150..db5b979e5a0c 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1,8 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
* Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index 7ddddb4c3844..8c810733df3d 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for Zilog serial chips found on SGI workstations and
* servers. This driver could actually be made more generic.
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 0b79b87df47d..7a128aaa3a66 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/************************************************************************
* Copyright 2003 Digi International (www.digi.com)
*
* Copyright (C) 2004 IBM Corporation. All rights reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
* Wendy Xiong <wendyx@us.ibm.com>
diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index 4eb12a9cae76..c061a7b7bd23 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2003 Digi International (www.digi.com)
* Scott H Kilau <Scott_Kilau at digi dot com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
* NOTE TO LINUX KERNEL HACKERS: DO NOT REFORMAT THIS CODE!
*
* This is shared code between Digi's CVS archive and the
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 102d499814ac..592e51d8944e 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/************************************************************************
* Copyright 2003 Digi International (www.digi.com)
*
* Copyright (C) 2004 IBM Corporation. All rights reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
* Wendy Xiong <wendyx@us.ibm.com>
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index c6fdd6369534..4718560b8fdc 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/************************************************************************
* Copyright 2003 Digi International (www.digi.com)
*
* Copyright (C) 2004 IBM Corporation. All rights reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
* Wendy Xiong <wendyx@us.ibm.com>
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index ec7d8383900f..469927d37b41 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/************************************************************************
* Copyright 2003 Digi International (www.digi.com)
*
* Copyright (C) 2004 IBM Corporation. All rights reserved.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
- * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
* Ananda Venkatarman <mansarov@us.ibm.com>
@@ -36,7 +27,7 @@ static void jsm_carrier(struct jsm_channel *ch);
static inline int jsm_get_mstat(struct jsm_channel *ch)
{
unsigned char mstat;
- unsigned result;
+ int result;
jsm_dbg(IOCTL, &ch->ch_bd->pci_dev, "start\n");
@@ -124,6 +115,7 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
static void jsm_tty_write(struct uart_port *port)
{
struct jsm_channel *channel;
+
channel = container_of(port, struct jsm_channel, uart_port);
channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel);
}
@@ -275,14 +267,12 @@ static int jsm_tty_open(struct uart_port *port)
static void jsm_tty_close(struct uart_port *port)
{
struct jsm_board *bd;
- struct ktermios *ts;
struct jsm_channel *channel =
container_of(port, struct jsm_channel, uart_port);
jsm_dbg(CLOSE, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
- ts = &port->state->port.tty->termios;
channel->ch_flags &= ~(CH_STOPI);
@@ -473,12 +463,11 @@ int jsm_uart_port_init(struct jsm_board *brd)
} else
set_bit(line, linemap);
brd->channels[i]->uart_port.line = line;
- rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port);
- if (rc){
+ rc = uart_add_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
+ if (rc) {
printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i);
return rc;
- }
- else
+ } else
printk(KERN_INFO "jsm: Port %d added\n", i);
}
@@ -541,7 +530,7 @@ void jsm_input(struct jsm_channel *ch)
tp = port->tty;
bd = ch->ch_bd;
- if(!bd)
+ if (!bd)
return;
spin_lock_irqsave(&ch->ch_lock, lock_flags);
@@ -781,7 +770,7 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch)
if (qleft < 256) {
/* HWFLOW */
if (ch->ch_c_cflag & CRTSCTS) {
- if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
+ if (!(ch->ch_flags & CH_RECEIVER_OFF)) {
bd_ops->disable_receiver(ch);
ch->ch_flags |= (CH_RECEIVER_OFF);
jsm_dbg(READ, &ch->ch_bd->pci_dev,
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 117df151627d..ed2b03058627 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* KGDB NMI serial console
*
@@ -6,10 +7,6 @@
* Colin Cross <ccross@android.com>
* Copyright 2012 Linaro Ltd.
* Anton Vorontsov <anton.vorontsov@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/kernel.h>
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index a260cde743e2..ddb46fa2d07f 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Based on the same principle as kgdboe using the NETPOLL api, this
* driver uses a console polling api to implement a gdb serial inteface
@@ -6,10 +7,6 @@
* Maintainer: Jason Wessel <jason.wessel@windriver.com>
*
* 2007-2008 (c) Jason Wessel - Wind River Systems, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/ctype.h>
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 22df94f107e5..044128277248 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -1,19 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
* Copyright (C) 2004 Infineon IFAP DC COM CPE
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 John Crispin <john@phrozen.org>
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index cea57ff32c33..d1d73261575b 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* High Speed Serial Ports on NXP LPC32xx SoC
*
@@ -6,16 +7,6 @@
*
* Copyright (C) 2010 NXP Semiconductors
* Copyright (C) 2012 Roland Stigge
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 5b3bd9511993..7b83a8aab495 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* m32r_sio.c
*
@@ -8,11 +9,6 @@
*
* Copyright (C) 2001 Russell King.
* Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
/*
@@ -511,9 +507,9 @@ static void serial_unlink_irq_chain(struct uart_sio_port *up)
/*
* This function is used to handle ports that do not have an interrupt.
*/
-static void m32r_sio_timeout(unsigned long data)
+static void m32r_sio_timeout(struct timer_list *t)
{
- struct uart_sio_port *up = (struct uart_sio_port *)data;
+ struct uart_sio_port *up = from_timer(up, t, timer);
unsigned int timeout;
unsigned int sts;
@@ -576,7 +572,6 @@ static int m32r_sio_startup(struct uart_port *port)
timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
- up->timer.data = (unsigned long)up;
mod_timer(&up->timer, jiffies + timeout);
} else {
retval = serial_link_irq_chain(up);
@@ -907,8 +902,7 @@ static void __init m32r_sio_register_ports(struct uart_driver *drv)
up->port.line = i;
up->port.ops = &m32r_sio_pops;
- init_timer(&up->timer);
- up->timer.function = m32r_sio_timeout;
+ timer_setup(&up->timer, m32r_sio_timeout, 0);
uart_add_one_port(drv, &up->port);
}
diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/m32r_sio_reg.h
index 4671473793e3..6eed48828f94 100644
--- a/drivers/tty/serial/m32r_sio_reg.h
+++ b/drivers/tty/serial/m32r_sio_reg.h
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-1.0+
/*
* m32r_sio_reg.h
*
* Copyright (C) 1992, 1994 by Theodore Ts'o.
* Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
*
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- *
* These are the UART port assignments, expressed as offsets from the base
* register. These assignments should hold for any serial port based on
* a 8250, 16450, or 16550(A).
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index ace82645b123..27d6049eb6a9 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
*
* Copyright (C) 2008 Christian Pellegrin <chripell@evolware.org>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
* Notes: the MAX3100 doesn't provide an interrupt on CTS so we have
* to use polling for flow control. TX empty IRQ is unusable, since
* writing conf clears FIFO buffer and we cannot have this interrupt
@@ -263,7 +258,7 @@ static void max3100_work(struct work_struct *w)
struct max3100_port *s = container_of(w, struct max3100_port, work);
int rxchars;
u16 tx, rx;
- int conf, cconf, rts, crts;
+ int conf, cconf, crts;
struct circ_buf *xmit = &s->port.state->xmit;
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -274,7 +269,6 @@ static void max3100_work(struct work_struct *w)
conf = s->conf;
cconf = s->conf_commit;
s->conf_commit = 0;
- rts = s->rts;
crts = s->rts_commit;
s->rts_commit = 0;
spin_unlock(&s->conf_lock);
@@ -436,7 +430,6 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
dev_dbg(&s->spi->dev, "%s\n", __func__);
cflag = termios->c_cflag;
- param_new = 0;
param_mask = 0;
baud = tty_termios_baud_rate(termios);
@@ -787,9 +780,8 @@ static int max3100_probe(struct spi_device *spi)
max3100s[i]->poll_time = 1;
max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend;
max3100s[i]->minor = i;
- init_timer(&max3100s[i]->timer);
- max3100s[i]->timer.function = max3100_timeout;
- max3100s[i]->timer.data = (unsigned long) max3100s[i];
+ setup_timer(&max3100s[i]->timer, max3100_timeout,
+ (unsigned long)max3100s[i]);
dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i);
max3100s[i]->port.irq = max3100s[i]->irq;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 9dfedbe6c071..ecb6513a6505 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver
*
@@ -6,11 +7,6 @@
* Based on max3100.c, by Christian Pellegrin <chripell@evolware.org>
* Based on max3110.c, by Feng Tang <feng.tang@intel.com>
* Based on max3107.c, by Aavamobile
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/bitops.h>
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 02eb32217685..7dbfb4cde124 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/****************************************************************************/
/*
* mcf.c -- Freescale ColdFire UART driver
*
* (C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
/****************************************************************************/
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index e72ea61c70db..ef89534dd760 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* MEN 16z135 High Speed UART
*
* Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
* Author: Johannes Thumshirn <johannes.thumshirn@men.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; version 2 of the License.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 07c0f98be3ac..daafe60175da 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -1,19 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Based on meson_uart.c, by AMLOGIC, INC.
*
* Copyright (C) 2014 Carlo Caione <carlo@caione.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
+#if defined(CONFIG_SERIAL_MESON_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
@@ -183,12 +178,12 @@ static void meson_receive_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
char flag;
- u32 status, ch, mode;
+ u32 ostatus, status, ch, mode;
do {
flag = TTY_NORMAL;
port->icount.rx++;
- status = readl(port->membase + AML_UART_STATUS);
+ ostatus = status = readl(port->membase + AML_UART_STATUS);
if (status & AML_UART_ERR) {
if (status & AML_UART_TX_FIFO_WERR)
@@ -216,6 +211,16 @@ static void meson_receive_chars(struct uart_port *port)
ch = readl(port->membase + AML_UART_RFIFO);
ch &= 0xff;
+ if ((ostatus & AML_UART_FRAME_ERR) && (ch == 0)) {
+ port->icount.brk++;
+ flag = TTY_BREAK;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
if ((status & port->ignore_status_mask) == 0)
tty_insert_flip_char(tport, ch, flag);
@@ -362,7 +367,7 @@ static void meson_uart_set_termios(struct uart_port *port,
writel(val, port->membase + AML_UART_CONTROL);
- baud = uart_get_baud_rate(port, termios, old, 9600, 4000000);
+ baud = uart_get_baud_rate(port, termios, old, 50, 4000000);
meson_uart_change_speed(port, baud);
port->read_status_mask = AML_UART_TX_FIFO_WERR;
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 791c4c74f6d6..3a75ee08d619 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
*
@@ -23,10 +24,6 @@
* Grant Likely <grant.likely@secretlab.ca>
* Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com>
* Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
*/
#undef DEBUG
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 492ec4b375a0..9f8f63719126 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* MPS2 UART driver
*
@@ -5,10 +6,6 @@
*
* Author: Vladimir Murzin <vladimir.murzin@arm.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* TODO: support for SysRq
*/
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index 67ffecc50e42..1f60d6fe4ff2 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
* GT64260, MV64340, MV64360, GT96100, ... ).
@@ -10,10 +11,7 @@
* taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c
* by Russell King.
*
- * 2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2004 (c) MontaVista, Software, Inc.
*/
/*
* The MPSC interface is much like a typical network controller's interface.
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 1db79ee8a886..ee96cf0d0057 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for msm7k serial device and console
*
* Copyright (C) 2007 Google, Inc.
* Author: Robert Love <rlove@google.com>
* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 2bff69e70e4b..3b74369c262f 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
** mux.c:
** serial driver for the Mux console found in some PA-RISC servers.
@@ -5,11 +6,6 @@
** (c) Copyright 2002 Ryan Bradetich
** (c) Copyright 2002 Hewlett-Packard Company
**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
** This Driver currently only supports the console (port 0) on the MUX.
** Additional work will be needed on this driver to enable the full
** functionality of the MUX.
@@ -576,8 +572,7 @@ static int __init mux_init(void)
if(port_cnt > 0) {
/* Start the Mux timer */
- init_timer(&mux_timer);
- mux_timer.function = mux_poll;
+ setup_timer(&mux_timer, mux_poll, 0UL);
mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
#ifdef CONFIG_SERIAL_MUX_CONSOLE
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 45b57c294d13..a100e98259d7 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -1,21 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* ***************************************************************************
* Marvell Armada-3700 Serial Driver
* Author: Wilson Ding <dingwei@marvell.com>
* Copyright (C) 2015 Marvell International Ltd.
* ***************************************************************************
-* This program is free software: you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the Free
-* Software Foundation, either version 2 of the License, or any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program. If not, see <http://www.gnu.org/licenses/>.
-* ***************************************************************************
*/
#include <linux/clk.h>
@@ -38,46 +27,40 @@
#include <linux/tty_flip.h>
/* Register Map */
-#define UART_RBR 0x00
-#define RBR_BRK_DET BIT(15)
-#define RBR_FRM_ERR_DET BIT(14)
-#define RBR_PAR_ERR_DET BIT(13)
-#define RBR_OVR_ERR_DET BIT(12)
+#define UART_STD_RBR 0x00
+#define UART_EXT_RBR 0x18
-#define UART_TSH 0x04
+#define UART_STD_TSH 0x04
+#define UART_EXT_TSH 0x1C
-#define UART_CTRL 0x08
+#define UART_STD_CTRL1 0x08
+#define UART_EXT_CTRL1 0x04
#define CTRL_SOFT_RST BIT(31)
#define CTRL_TXFIFO_RST BIT(15)
#define CTRL_RXFIFO_RST BIT(14)
-#define CTRL_ST_MIRR_EN BIT(13)
-#define CTRL_LPBK_EN BIT(12)
#define CTRL_SND_BRK_SEQ BIT(11)
-#define CTRL_PAR_EN BIT(10)
-#define CTRL_TWO_STOP BIT(9)
-#define CTRL_TX_HFL_INT BIT(8)
-#define CTRL_RX_HFL_INT BIT(7)
-#define CTRL_TX_EMP_INT BIT(6)
-#define CTRL_TX_RDY_INT BIT(5)
-#define CTRL_RX_RDY_INT BIT(4)
#define CTRL_BRK_DET_INT BIT(3)
#define CTRL_FRM_ERR_INT BIT(2)
#define CTRL_PAR_ERR_INT BIT(1)
#define CTRL_OVR_ERR_INT BIT(0)
-#define CTRL_RX_INT (CTRL_RX_RDY_INT | CTRL_BRK_DET_INT |\
- CTRL_FRM_ERR_INT | CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT)
+#define CTRL_BRK_INT (CTRL_BRK_DET_INT | CTRL_FRM_ERR_INT | \
+ CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT)
+
+#define UART_STD_CTRL2 UART_STD_CTRL1
+#define UART_EXT_CTRL2 0x20
+#define CTRL_STD_TX_RDY_INT BIT(5)
+#define CTRL_EXT_TX_RDY_INT BIT(6)
+#define CTRL_STD_RX_RDY_INT BIT(4)
+#define CTRL_EXT_RX_RDY_INT BIT(5)
-#define UART_STAT 0x0c
+#define UART_STAT 0x0C
#define STAT_TX_FIFO_EMP BIT(13)
-#define STAT_RX_FIFO_EMP BIT(12)
#define STAT_TX_FIFO_FUL BIT(11)
-#define STAT_TX_FIFO_HFL BIT(10)
-#define STAT_RX_TOGL BIT(9)
-#define STAT_RX_FIFO_FUL BIT(8)
-#define STAT_RX_FIFO_HFL BIT(7)
#define STAT_TX_EMP BIT(6)
-#define STAT_TX_RDY BIT(5)
-#define STAT_RX_RDY BIT(4)
+#define STAT_STD_TX_RDY BIT(5)
+#define STAT_EXT_TX_RDY BIT(15)
+#define STAT_STD_RX_RDY BIT(4)
+#define STAT_EXT_RX_RDY BIT(14)
#define STAT_BRK_DET BIT(3)
#define STAT_FRM_ERR BIT(2)
#define STAT_PAR_ERR BIT(1)
@@ -86,18 +69,73 @@
| STAT_PAR_ERR | STAT_OVR_ERR)
#define UART_BRDV 0x10
+#define BRDV_BAUD_MASK 0x3FF
-#define MVEBU_NR_UARTS 1
+#define MVEBU_NR_UARTS 2
#define MVEBU_UART_TYPE "mvebu-uart"
+#define DRIVER_NAME "mvebu_serial"
+
+enum {
+ /* Either there is only one summed IRQ... */
+ UART_IRQ_SUM = 0,
+ /* ...or there are two separate IRQ for RX and TX */
+ UART_RX_IRQ = 0,
+ UART_TX_IRQ,
+ UART_IRQ_COUNT
+};
-static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS];
+/* Diverging register offsets */
+struct uart_regs_layout {
+ unsigned int rbr;
+ unsigned int tsh;
+ unsigned int ctrl;
+ unsigned int intr;
+};
+
+/* Diverging flags */
+struct uart_flags {
+ unsigned int ctrl_tx_rdy_int;
+ unsigned int ctrl_rx_rdy_int;
+ unsigned int stat_tx_rdy;
+ unsigned int stat_rx_rdy;
+};
+
+/* Driver data, a structure for each UART port */
+struct mvebu_uart_driver_data {
+ bool is_ext;
+ struct uart_regs_layout regs;
+ struct uart_flags flags;
+};
-struct mvebu_uart_data {
+/* MVEBU UART driver structure */
+struct mvebu_uart {
struct uart_port *port;
- struct clk *clk;
+ struct clk *clk;
+ int irq[UART_IRQ_COUNT];
+ unsigned char __iomem *nb;
+ struct mvebu_uart_driver_data *data;
};
+static struct mvebu_uart *to_mvuart(struct uart_port *port)
+{
+ return (struct mvebu_uart *)port->private_data;
+}
+
+#define IS_EXTENDED(port) (to_mvuart(port)->data->is_ext)
+
+#define UART_RBR(port) (to_mvuart(port)->data->regs.rbr)
+#define UART_TSH(port) (to_mvuart(port)->data->regs.tsh)
+#define UART_CTRL(port) (to_mvuart(port)->data->regs.ctrl)
+#define UART_INTR(port) (to_mvuart(port)->data->regs.intr)
+
+#define CTRL_TX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_tx_rdy_int)
+#define CTRL_RX_RDY_INT(port) (to_mvuart(port)->data->flags.ctrl_rx_rdy_int)
+#define STAT_TX_RDY(port) (to_mvuart(port)->data->flags.stat_tx_rdy)
+#define STAT_RX_RDY(port) (to_mvuart(port)->data->flags.stat_rx_rdy)
+
+static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS];
+
/* Core UART Driver Operations */
static unsigned int mvebu_uart_tx_empty(struct uart_port *port)
{
@@ -127,26 +165,39 @@ static void mvebu_uart_set_mctrl(struct uart_port *port,
static void mvebu_uart_stop_tx(struct uart_port *port)
{
- unsigned int ctl = readl(port->membase + UART_CTRL);
+ unsigned int ctl = readl(port->membase + UART_INTR(port));
- ctl &= ~CTRL_TX_RDY_INT;
- writel(ctl, port->membase + UART_CTRL);
+ ctl &= ~CTRL_TX_RDY_INT(port);
+ writel(ctl, port->membase + UART_INTR(port));
}
static void mvebu_uart_start_tx(struct uart_port *port)
{
- unsigned int ctl = readl(port->membase + UART_CTRL);
+ unsigned int ctl;
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) {
+ writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port));
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
- ctl |= CTRL_TX_RDY_INT;
- writel(ctl, port->membase + UART_CTRL);
+ ctl = readl(port->membase + UART_INTR(port));
+ ctl |= CTRL_TX_RDY_INT(port);
+ writel(ctl, port->membase + UART_INTR(port));
}
static void mvebu_uart_stop_rx(struct uart_port *port)
{
- unsigned int ctl = readl(port->membase + UART_CTRL);
+ unsigned int ctl;
+
+ ctl = readl(port->membase + UART_CTRL(port));
+ ctl &= ~CTRL_BRK_INT;
+ writel(ctl, port->membase + UART_CTRL(port));
- ctl &= ~CTRL_RX_INT;
- writel(ctl, port->membase + UART_CTRL);
+ ctl = readl(port->membase + UART_INTR(port));
+ ctl &= ~CTRL_RX_RDY_INT(port);
+ writel(ctl, port->membase + UART_INTR(port));
}
static void mvebu_uart_break_ctl(struct uart_port *port, int brk)
@@ -155,12 +206,12 @@ static void mvebu_uart_break_ctl(struct uart_port *port, int brk)
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- ctl = readl(port->membase + UART_CTRL);
+ ctl = readl(port->membase + UART_CTRL(port));
if (brk == -1)
ctl |= CTRL_SND_BRK_SEQ;
else
ctl &= ~CTRL_SND_BRK_SEQ;
- writel(ctl, port->membase + UART_CTRL);
+ writel(ctl, port->membase + UART_CTRL(port));
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -171,8 +222,8 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
char flag = 0;
do {
- if (status & STAT_RX_RDY) {
- ch = readl(port->membase + UART_RBR);
+ if (status & STAT_RX_RDY(port)) {
+ ch = readl(port->membase + UART_RBR(port));
ch &= 0xff;
flag = TTY_NORMAL;
port->icount.rx++;
@@ -198,7 +249,7 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
goto ignore_char;
if (status & port->ignore_status_mask & STAT_PAR_ERR)
- status &= ~STAT_RX_RDY;
+ status &= ~STAT_RX_RDY(port);
status &= port->read_status_mask;
@@ -207,7 +258,7 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
status &= ~port->ignore_status_mask;
- if (status & STAT_RX_RDY)
+ if (status & STAT_RX_RDY(port))
tty_insert_flip_char(tport, ch, flag);
if (status & STAT_BRK_DET)
@@ -221,7 +272,7 @@ static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
ignore_char:
status = readl(port->membase + UART_STAT);
- } while (status & (STAT_RX_RDY | STAT_BRK_DET));
+ } while (status & (STAT_RX_RDY(port) | STAT_BRK_DET));
tty_flip_buffer_push(tport);
}
@@ -233,7 +284,7 @@ static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status)
unsigned int st;
if (port->x_char) {
- writel(port->x_char, port->membase + UART_TSH);
+ writel(port->x_char, port->membase + UART_TSH(port));
port->icount.tx++;
port->x_char = 0;
return;
@@ -245,7 +296,7 @@ static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status)
}
for (count = 0; count < port->fifosize; count++) {
- writel(xmit->buf[xmit->tail], port->membase + UART_TSH);
+ writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port));
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
@@ -269,10 +320,34 @@ static irqreturn_t mvebu_uart_isr(int irq, void *dev_id)
struct uart_port *port = (struct uart_port *)dev_id;
unsigned int st = readl(port->membase + UART_STAT);
- if (st & (STAT_RX_RDY | STAT_OVR_ERR | STAT_FRM_ERR | STAT_BRK_DET))
+ if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR |
+ STAT_BRK_DET))
mvebu_uart_rx_chars(port, st);
- if (st & STAT_TX_RDY)
+ if (st & STAT_TX_RDY(port))
+ mvebu_uart_tx_chars(port, st);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mvebu_uart_rx_isr(int irq, void *dev_id)
+{
+ struct uart_port *port = (struct uart_port *)dev_id;
+ unsigned int st = readl(port->membase + UART_STAT);
+
+ if (st & (STAT_RX_RDY(port) | STAT_OVR_ERR | STAT_FRM_ERR |
+ STAT_BRK_DET))
+ mvebu_uart_rx_chars(port, st);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mvebu_uart_tx_isr(int irq, void *dev_id)
+{
+ struct uart_port *port = (struct uart_port *)dev_id;
+ unsigned int st = readl(port->membase + UART_STAT);
+
+ if (st & STAT_TX_RDY(port))
mvebu_uart_tx_chars(port, st);
return IRQ_HANDLED;
@@ -280,18 +355,57 @@ static irqreturn_t mvebu_uart_isr(int irq, void *dev_id)
static int mvebu_uart_startup(struct uart_port *port)
{
+ struct mvebu_uart *mvuart = to_mvuart(port);
+ unsigned int ctl;
int ret;
writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST,
- port->membase + UART_CTRL);
+ port->membase + UART_CTRL(port));
udelay(1);
- writel(CTRL_RX_INT, port->membase + UART_CTRL);
- ret = request_irq(port->irq, mvebu_uart_isr, port->irqflags, "serial",
- port);
- if (ret) {
- dev_err(port->dev, "failed to request irq\n");
- return ret;
+ /* Clear the error bits of state register before IRQ request */
+ ret = readl(port->membase + UART_STAT);
+ ret |= STAT_BRK_ERR;
+ writel(ret, port->membase + UART_STAT);
+
+ writel(CTRL_BRK_INT, port->membase + UART_CTRL(port));
+
+ ctl = readl(port->membase + UART_INTR(port));
+ ctl |= CTRL_RX_RDY_INT(port);
+ writel(ctl, port->membase + UART_INTR(port));
+
+ if (!mvuart->irq[UART_TX_IRQ]) {
+ /* Old bindings with just one interrupt (UART0 only) */
+ ret = devm_request_irq(port->dev, mvuart->irq[UART_IRQ_SUM],
+ mvebu_uart_isr, port->irqflags,
+ dev_name(port->dev), port);
+ if (ret) {
+ dev_err(port->dev, "unable to request IRQ %d\n",
+ mvuart->irq[UART_IRQ_SUM]);
+ return ret;
+ }
+ } else {
+ /* New bindings with an IRQ for RX and TX (both UART) */
+ ret = devm_request_irq(port->dev, mvuart->irq[UART_RX_IRQ],
+ mvebu_uart_rx_isr, port->irqflags,
+ dev_name(port->dev), port);
+ if (ret) {
+ dev_err(port->dev, "unable to request IRQ %d\n",
+ mvuart->irq[UART_RX_IRQ]);
+ return ret;
+ }
+
+ ret = devm_request_irq(port->dev, mvuart->irq[UART_TX_IRQ],
+ mvebu_uart_tx_isr, port->irqflags,
+ dev_name(port->dev),
+ port);
+ if (ret) {
+ dev_err(port->dev, "unable to request IRQ %d\n",
+ mvuart->irq[UART_TX_IRQ]);
+ devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ],
+ port);
+ return ret;
+ }
}
return 0;
@@ -299,9 +413,41 @@ static int mvebu_uart_startup(struct uart_port *port)
static void mvebu_uart_shutdown(struct uart_port *port)
{
- writel(0, port->membase + UART_CTRL);
+ struct mvebu_uart *mvuart = to_mvuart(port);
+
+ writel(0, port->membase + UART_INTR(port));
+
+ if (!mvuart->irq[UART_TX_IRQ]) {
+ devm_free_irq(port->dev, mvuart->irq[UART_IRQ_SUM], port);
+ } else {
+ devm_free_irq(port->dev, mvuart->irq[UART_RX_IRQ], port);
+ devm_free_irq(port->dev, mvuart->irq[UART_TX_IRQ], port);
+ }
+}
+
+static int mvebu_uart_baud_rate_set(struct uart_port *port, unsigned int baud)
+{
+ struct mvebu_uart *mvuart = to_mvuart(port);
+ unsigned int baud_rate_div;
+ u32 brdv;
+
+ if (IS_ERR(mvuart->clk))
+ return -PTR_ERR(mvuart->clk);
+
+ /*
+ * The UART clock is divided by the value of the divisor to generate
+ * UCLK_OUT clock, which is 16 times faster than the baudrate.
+ * This prescaler can achieve all standard baudrates until 230400.
+ * Higher baudrates could be achieved for the extended UART by using the
+ * programmable oversampling stack (also called fractional divisor).
+ */
+ baud_rate_div = DIV_ROUND_UP(port->uartclk, baud * 16);
+ brdv = readl(port->membase + UART_BRDV);
+ brdv &= ~BRDV_BAUD_MASK;
+ brdv |= baud_rate_div;
+ writel(brdv, port->membase + UART_BRDV);
- free_irq(port->irq, port);
+ return 0;
}
static void mvebu_uart_set_termios(struct uart_port *port,
@@ -313,8 +459,8 @@ static void mvebu_uart_set_termios(struct uart_port *port,
spin_lock_irqsave(&port->lock, flags);
- port->read_status_mask = STAT_RX_RDY | STAT_OVR_ERR |
- STAT_TX_RDY | STAT_TX_FIFO_FUL;
+ port->read_status_mask = STAT_RX_RDY(port) | STAT_OVR_ERR |
+ STAT_TX_RDY(port) | STAT_TX_FIFO_FUL;
if (termios->c_iflag & INPCK)
port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR;
@@ -325,13 +471,32 @@ static void mvebu_uart_set_termios(struct uart_port *port,
STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR;
if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= STAT_RX_RDY | STAT_BRK_ERR;
-
- if (old)
- tty_termios_copy_hw(termios, old);
+ port->ignore_status_mask |= STAT_RX_RDY(port) | STAT_BRK_ERR;
+
+ /*
+ * Maximum achievable frequency with simple baudrate divisor is 230400.
+ * Since the error per bit frame would be of more than 15%, achieving
+ * higher frequencies would require to implement the fractional divisor
+ * feature.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+ if (mvebu_uart_baud_rate_set(port, baud)) {
+ /* No clock available, baudrate cannot be changed */
+ if (old)
+ baud = uart_get_baud_rate(port, old, NULL, 0, 230400);
+ } else {
+ tty_termios_encode_baud_rate(termios, baud, baud);
+ uart_update_timeout(port, termios->c_cflag, baud);
+ }
- baud = uart_get_baud_rate(port, termios, old, 0, 460800);
- uart_update_timeout(port, termios->c_cflag, baud);
+ /* Only the following flag changes are supported */
+ if (old) {
+ termios->c_iflag &= INPCK | IGNPAR;
+ termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR);
+ termios->c_cflag &= CREAD | CBAUD;
+ termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD);
+ termios->c_lflag = old->c_lflag;
+ }
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -356,10 +521,10 @@ static int mvebu_uart_get_poll_char(struct uart_port *port)
{
unsigned int st = readl(port->membase + UART_STAT);
- if (!(st & STAT_RX_RDY))
+ if (!(st & STAT_RX_RDY(port)))
return NO_POLL_CHAR;
- return readl(port->membase + UART_RBR);
+ return readl(port->membase + UART_RBR(port));
}
static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c)
@@ -375,7 +540,7 @@ static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c)
udelay(1);
}
- writel(c, port->membase + UART_TSH);
+ writel(c, port->membase + UART_TSH(port));
}
#endif
@@ -413,7 +578,8 @@ static void mvebu_uart_putc(struct uart_port *port, int c)
break;
}
- writel(c, port->membase + UART_TSH);
+ /* At early stage, DT is not parsed yet, only use UART0 */
+ writel(c, port->membase + UART_STD_TSH);
for (;;) {
st = readl(port->membase + UART_STAT);
@@ -458,7 +624,7 @@ static void wait_for_xmitr(struct uart_port *port)
static void mvebu_uart_console_putchar(struct uart_port *port, int ch)
{
wait_for_xmitr(port);
- writel(ch, port->membase + UART_TSH);
+ writel(ch, port->membase + UART_TSH(port));
}
static void mvebu_uart_console_write(struct console *co, const char *s,
@@ -466,7 +632,7 @@ static void mvebu_uart_console_write(struct console *co, const char *s,
{
struct uart_port *port = &mvebu_uart_ports[co->index];
unsigned long flags;
- unsigned int ier;
+ unsigned int ier, intr, ctl;
int locked = 1;
if (oops_in_progress)
@@ -474,16 +640,23 @@ static void mvebu_uart_console_write(struct console *co, const char *s,
else
spin_lock_irqsave(&port->lock, flags);
- ier = readl(port->membase + UART_CTRL) &
- (CTRL_RX_INT | CTRL_TX_RDY_INT);
- writel(0, port->membase + UART_CTRL);
+ ier = readl(port->membase + UART_CTRL(port)) & CTRL_BRK_INT;
+ intr = readl(port->membase + UART_INTR(port)) &
+ (CTRL_RX_RDY_INT(port) | CTRL_TX_RDY_INT(port));
+ writel(0, port->membase + UART_CTRL(port));
+ writel(0, port->membase + UART_INTR(port));
uart_console_write(port, s, count, mvebu_uart_console_putchar);
wait_for_xmitr(port);
if (ier)
- writel(ier, port->membase + UART_CTRL);
+ writel(ier, port->membase + UART_CTRL(port));
+
+ if (intr) {
+ ctl = intr | readl(port->membase + UART_INTR(port));
+ writel(ctl, port->membase + UART_INTR(port));
+ }
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
@@ -538,7 +711,7 @@ console_initcall(mvebu_uart_console_init);
static struct uart_driver mvebu_uart_driver = {
.owner = THIS_MODULE,
- .driver_name = "mvebu_serial",
+ .driver_name = DRIVER_NAME,
.dev_name = "ttyMV",
.nr = MVEBU_NR_UARTS,
#ifdef CONFIG_SERIAL_MVEBU_CONSOLE
@@ -546,20 +719,39 @@ static struct uart_driver mvebu_uart_driver = {
#endif
};
+static const struct of_device_id mvebu_uart_of_match[];
+
+/* Counter to keep track of each UART port id when not using CONFIG_OF */
+static int uart_num_counter;
+
static int mvebu_uart_probe(struct platform_device *pdev)
{
struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ const struct of_device_id *match = of_match_device(mvebu_uart_of_match,
+ &pdev->dev);
struct uart_port *port;
- struct mvebu_uart_data *data;
- int ret;
+ struct mvebu_uart *mvuart;
+ int ret, id, irq;
+
+ if (!reg) {
+ dev_err(&pdev->dev, "no registers defined\n");
+ return -EINVAL;
+ }
+
+ /* Assume that all UART ports have a DT alias or none has */
+ id = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (!pdev->dev.of_node || id < 0)
+ pdev->id = uart_num_counter++;
+ else
+ pdev->id = id;
- if (!reg || !irq) {
- dev_err(&pdev->dev, "no registers/irq defined\n");
+ if (pdev->id >= MVEBU_NR_UARTS) {
+ dev_err(&pdev->dev, "cannot have more than %d UART ports\n",
+ MVEBU_NR_UARTS);
return -EINVAL;
}
- port = &mvebu_uart_ports[0];
+ port = &mvebu_uart_ports[pdev->id];
spin_lock_init(&port->lock);
@@ -571,9 +763,14 @@ static int mvebu_uart_probe(struct platform_device *pdev)
port->fifosize = 32;
port->iotype = UPIO_MEM32;
port->flags = UPF_FIXED_PORT;
- port->line = 0; /* single port: force line number to 0 */
-
- port->irq = irq->start;
+ port->line = pdev->id;
+
+ /*
+ * IRQ number is not stored in this structure because we may have two of
+ * them per port (RX and TX). Instead, use the driver UART structure
+ * array so called ->irq[].
+ */
+ port->irq = 0;
port->irqflags = 0;
port->mapbase = reg->start;
@@ -581,15 +778,70 @@ static int mvebu_uart_probe(struct platform_device *pdev)
if (IS_ERR(port->membase))
return -PTR_ERR(port->membase);
- data = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart_data),
- GFP_KERNEL);
- if (!data)
+ mvuart = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart),
+ GFP_KERNEL);
+ if (!mvuart)
return -ENOMEM;
- data->port = port;
+ /* Get controller data depending on the compatible string */
+ mvuart->data = (struct mvebu_uart_driver_data *)match->data;
+ mvuart->port = port;
+
+ port->private_data = mvuart;
+ platform_set_drvdata(pdev, mvuart);
+
+ /* Get fixed clock frequency */
+ mvuart->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mvuart->clk)) {
+ if (PTR_ERR(mvuart->clk) == -EPROBE_DEFER)
+ return PTR_ERR(mvuart->clk);
+
+ if (IS_EXTENDED(port)) {
+ dev_err(&pdev->dev, "unable to get UART clock\n");
+ return PTR_ERR(mvuart->clk);
+ }
+ } else {
+ if (!clk_prepare_enable(mvuart->clk))
+ port->uartclk = clk_get_rate(mvuart->clk);
+ }
+
+ /* Manage interrupts */
+ if (platform_irq_count(pdev) == 1) {
+ /* Old bindings: no name on the single unamed UART0 IRQ */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "unable to get UART IRQ\n");
+ return irq;
+ }
+
+ mvuart->irq[UART_IRQ_SUM] = irq;
+ } else {
+ /*
+ * New bindings: named interrupts (RX, TX) for both UARTS,
+ * only make use of uart-rx and uart-tx interrupts, do not use
+ * uart-sum of UART0 port.
+ */
+ irq = platform_get_irq_byname(pdev, "uart-rx");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "unable to get 'uart-rx' IRQ\n");
+ return irq;
+ }
+
+ mvuart->irq[UART_RX_IRQ] = irq;
- port->private_data = data;
- platform_set_drvdata(pdev, data);
+ irq = platform_get_irq_byname(pdev, "uart-tx");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "unable to get 'uart-tx' IRQ\n");
+ return irq;
+ }
+
+ mvuart->irq[UART_TX_IRQ] = irq;
+ }
+
+ /* UART Soft Reset*/
+ writel(CTRL_SOFT_RST, port->membase + UART_CTRL(port));
+ udelay(1);
+ writel(0, port->membase + UART_CTRL(port));
ret = uart_add_one_port(&mvebu_uart_driver, port);
if (ret)
@@ -597,9 +849,40 @@ static int mvebu_uart_probe(struct platform_device *pdev)
return 0;
}
+static struct mvebu_uart_driver_data uart_std_driver_data = {
+ .is_ext = false,
+ .regs.rbr = UART_STD_RBR,
+ .regs.tsh = UART_STD_TSH,
+ .regs.ctrl = UART_STD_CTRL1,
+ .regs.intr = UART_STD_CTRL2,
+ .flags.ctrl_tx_rdy_int = CTRL_STD_TX_RDY_INT,
+ .flags.ctrl_rx_rdy_int = CTRL_STD_RX_RDY_INT,
+ .flags.stat_tx_rdy = STAT_STD_TX_RDY,
+ .flags.stat_rx_rdy = STAT_STD_RX_RDY,
+};
+
+static struct mvebu_uart_driver_data uart_ext_driver_data = {
+ .is_ext = true,
+ .regs.rbr = UART_EXT_RBR,
+ .regs.tsh = UART_EXT_TSH,
+ .regs.ctrl = UART_EXT_CTRL1,
+ .regs.intr = UART_EXT_CTRL2,
+ .flags.ctrl_tx_rdy_int = CTRL_EXT_TX_RDY_INT,
+ .flags.ctrl_rx_rdy_int = CTRL_EXT_RX_RDY_INT,
+ .flags.stat_tx_rdy = STAT_EXT_TX_RDY,
+ .flags.stat_rx_rdy = STAT_EXT_RX_RDY,
+};
+
/* Match table for of_platform binding */
static const struct of_device_id mvebu_uart_of_match[] = {
- { .compatible = "marvell,armada-3700-uart", },
+ {
+ .compatible = "marvell,armada-3700-uart",
+ .data = (void *)&uart_std_driver_data,
+ },
+ {
+ .compatible = "marvell,armada-3700-uart-ext",
+ .data = (void *)&uart_ext_driver_data,
+ },
{}
};
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index be94246b6fcc..efb4fd3784ed 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Application UART driver for:
* Freescale STMP37XX/STMP378X
@@ -9,10 +10,6 @@
* Provide Alphascale ASM9260 support.
* Copyright 2008-2010 Freescale Semiconductor, Inc.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
*/
#if defined(CONFIG_SERIAL_MXS_AUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c
index 207a0a032ed1..b3556863491f 100644
--- a/drivers/tty/serial/netx-serial.c
+++ b/drivers/tty/serial/netx-serial.c
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7754053deeda..53d59e9b944a 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for OMAP-UART controller.
* Based on drivers/serial/8250.c
@@ -8,11 +9,6 @@
* Govindraj R <govindraj.raja@ti.com>
* Thara Gopinath <thara@ti.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* Note: This driver is made separate from 8250 driver as we cannot
* over load 8250 driver with omap platform specific configuration for
* features like DMA, it makes easier to implement features like DMA and
@@ -610,7 +606,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
default:
break;
}
- } while (!(iir & UART_IIR_NO_INT) && max_count--);
+ } while (max_count--);
spin_unlock(&up->port.lock);
@@ -693,7 +689,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
up->efr |= UART_EFR_RTS;
else
- up->efr &= UART_EFR_RTS;
+ up->efr &= ~UART_EFR_RTS;
serial_out(up, UART_EFR, up->efr);
serial_out(up, UART_LCR, lcr);
@@ -1606,7 +1602,6 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
struct device_node *np)
{
struct serial_rs485 *rs485conf = &up->port.rs485;
- u32 rs485_delay[2];
enum of_gpio_flags flags;
int ret;
@@ -1637,17 +1632,7 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
up->rts_gpio = -EINVAL;
}
- if (of_property_read_u32_array(np, "rs485-rts-delay",
- rs485_delay, 2) == 0) {
- rs485conf->delay_rts_before_send = rs485_delay[0];
- rs485conf->delay_rts_after_send = rs485_delay[1];
- }
-
- if (of_property_read_bool(np, "rs485-rx-during-tx"))
- rs485conf->flags |= SER_RS485_RX_DURING_TX;
-
- if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time"))
- rs485conf->flags |= SER_RS485_ENABLED;
+ of_get_rs485_mode(np, rs485conf);
return 0;
}
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index b9c859365334..29a6dc6a8d23 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Actions Semi Owl family serial console
*
@@ -5,19 +6,6 @@
* Author: Actions Semi, Inc.
*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index d9123f995705..760d5dd0aada 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1,18 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
*Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
- *
- *This program is free software; you can redistribute it and/or modify
- *it under the terms of the GNU General Public License as published by
- *the Free Software Foundation; version 2 of the License.
- *
- *This program is distributed in the hope that it will be useful,
- *but WITHOUT ANY WARRANTY; without even the implied warranty of
- *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *GNU General Public License for more details.
- *
- *You should have received a copy of the GNU General Public License
- *along with this program; if not, write to the Free Software
- *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#if defined(CONFIG_SERIAL_PCH_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 00a33eb859d3..fd80d999308d 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* PIC32 Integrated Serial Driver.
*
@@ -5,8 +6,6 @@
*
* Authors:
* Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
- *
- * Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
diff --git a/drivers/tty/serial/pic32_uart.h b/drivers/tty/serial/pic32_uart.h
index ec379da55ebb..2f2b56927dc6 100644
--- a/drivers/tty/serial/pic32_uart.h
+++ b/drivers/tty/serial/pic32_uart.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* PIC32 Integrated Serial Driver.
*
@@ -5,8 +6,6 @@
*
* Authors:
* Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
- *
- * Licensed under GPLv2 or later.
*/
#ifndef __DT_PIC32_UART_H__
#define __DT_PIC32_UART_H__
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 6ccdd018fb45..3d21790d961e 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for PowerMac Z85c30 based ESCC cell found in the
* "macio" ASICs of various PowerMac models
@@ -13,20 +14,6 @@
* and once done, I expect that driver to remain fairly stable in
* the long term, unless we change the driver model again...
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
* 2004-08-06 Harald Welte <laforge@gnumonks.org>
* - Enable BREAK interrupt
* - Add support for sysreq
diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c
index dab2668d3879..f8812389b8a8 100644
--- a/drivers/tty/serial/pnx8xxx_uart.c
+++ b/drivers/tty/serial/pnx8xxx_uart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* UART driver for PNX8XXX SoCs
*
@@ -7,11 +8,6 @@
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
* Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
- *
*/
#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -666,9 +662,8 @@ static void __init pnx8xxx_init_ports(void)
first = 0;
for (i = 0; i < NR_PORTS; i++) {
- init_timer(&pnx8xxx_ports[i].timer);
- pnx8xxx_ports[i].timer.function = pnx8xxx_timeout;
- pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i];
+ setup_timer(&pnx8xxx_ports[i].timer, pnx8xxx_timeout,
+ (unsigned long)&pnx8xxx_ports[i]);
pnx8xxx_ports[i].port.ops = &pnx8xxx_pops;
}
}
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 905631df1f8b..baf552944d56 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Based on drivers/serial/8250.c by Russell King.
*
@@ -5,11 +6,6 @@
* Created: Feb 20, 2003
* Copyright: (C) 2003 Monta Vista Software, Inc.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* Note 1: This driver is made separate from the already too overloaded
* 8250.c because it needs some kirks of its own and that'll make it
* easier to add DMA support.
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
index 056f91b3a4ca..520b43b23543 100644
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver for Comtrol RocketPort EXPRESS/INFINITY cards
*
@@ -10,10 +11,6 @@
*
* rocketport_infinity_express-linux-1.20.tar.gz
* Copyright (C) 2004-2011 Comtrol, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/bitops.h>
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index fd3d1329d48c..4e3f169b30cf 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for SA11x0 serial ports
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
* Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -640,9 +627,8 @@ static void __init sa1100_init_ports(void)
sa1100_ports[i].port.fifosize = 8;
sa1100_ports[i].port.line = i;
sa1100_ports[i].port.iotype = UPIO_MEM;
- init_timer(&sa1100_ports[i].timer);
- sa1100_ports[i].timer.function = sa1100_timeout;
- sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i];
+ setup_timer(&sa1100_ports[i].timer, sa1100_timeout,
+ (unsigned long)&sa1100_ports[i]);
}
/*
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 8aca18c4cdea..f9fecc5ed0ce 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Driver core for Samsung SoC onboard UARTs.
*
* Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
/* Hote on 2410 error handling
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 965199b6c16f..f93022113f59 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
#ifndef __SAMSUNG_H
#define __SAMSUNG_H
@@ -6,10 +7,6 @@
*
* Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/dmaengine.h>
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 041625cc24bb..329aced26bd8 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Support for the asynchronous serial interface (DUART) included
* in the BCM1250 and derived System-On-a-Chip (SOC) devices.
@@ -9,11 +10,6 @@
*
* Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
* References:
*
* "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index ca54ce074a5f..65792a3539d0 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint
* Author: Jon Ringle <jringle@gridpoint.com>
*
* Based on max310x.c, by Alexander Shiyan <shc_work@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index b9c7a904c1ea..d6ae3086c2a2 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* NXP (Philips) SCC+++(SCN+++) serial driver
*
* Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
*
* Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#if defined(CONFIG_SERIAL_SCCNXP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -465,9 +461,9 @@ static void sccnxp_handle_events(struct sccnxp_port *s)
} while (1);
}
-static void sccnxp_timer(unsigned long data)
+static void sccnxp_timer(struct timer_list *t)
{
- struct sccnxp_port *s = (struct sccnxp_port *)data;
+ struct sccnxp_port *s = from_timer(s, t, timer);
unsigned long flags;
spin_lock_irqsave(&s->lock, flags);
@@ -987,8 +983,7 @@ static int sccnxp_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Unable to reguest IRQ %i\n", s->irq);
} else {
- init_timer(&s->timer);
- setup_timer(&s->timer, sccnxp_timer, (unsigned long)s);
+ timer_setup(&s->timer, sccnxp_timer, 0);
mod_timer(&s->timer, jiffies +
usecs_to_jiffies(s->pdata.poll_time_us));
return 0;
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index cf9b736f26f8..af2a29cfbbe9 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* serial_tegra.c
*
@@ -6,18 +7,6 @@
* Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 3a14cccbd7ff..854995e1cae7 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver core for serial ports
*
@@ -5,20 +6,6 @@
*
* Copyright 1999 ARM Limited
* Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/tty.h>
@@ -1482,10 +1469,10 @@ out:
static void uart_close(struct tty_struct *tty, struct file *filp)
{
struct uart_state *state = tty->driver_data;
- struct tty_port *port;
if (!state) {
struct uart_driver *drv = tty->driver->driver_state;
+ struct tty_port *port;
state = drv->state + tty->index;
port = &state->port;
@@ -1495,7 +1482,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
return;
}
- port = &state->port;
pr_debug("uart_close(%d) called\n", tty->index);
tty_port_close(tty->port, tty, filp);
@@ -3026,5 +3012,41 @@ EXPORT_SYMBOL(uart_resume_port);
EXPORT_SYMBOL(uart_add_one_port);
EXPORT_SYMBOL(uart_remove_one_port);
+/**
+ * of_get_rs485_mode() - Implement parsing rs485 properties
+ * @np: uart node
+ * @rs485conf: output parameter
+ *
+ * This function implements the device tree binding described in
+ * Documentation/devicetree/bindings/serial/rs485.txt.
+ */
+void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf)
+{
+ u32 rs485_delay[2];
+ int ret;
+
+ ret = of_property_read_u32_array(np, "rs485-rts-delay", rs485_delay, 2);
+ if (!ret) {
+ rs485conf->delay_rts_before_send = rs485_delay[0];
+ rs485conf->delay_rts_after_send = rs485_delay[1];
+ } else {
+ rs485conf->delay_rts_before_send = 0;
+ rs485conf->delay_rts_after_send = 0;
+ }
+
+ /*
+ * clear full-duplex and enabled flags to get to a defined state with
+ * the two following properties.
+ */
+ rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED);
+
+ if (of_property_read_bool(np, "rs485-rx-during-tx"))
+ rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+ if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time"))
+ rs485conf->flags |= SER_RS485_ENABLED;
+}
+EXPORT_SYMBOL_GPL(of_get_rs485_mode);
+
MODULE_DESCRIPTION("Serial driver core");
MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index 57f152394af5..b461d791188c 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for KS8695 serial ports
*
* Based on drivers/serial/serial_amba.c, by Kam Lee.
*
* Copyright 2002-2005 Micrel Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
*/
#include <linux/module.h>
#include <linux/tty.h>
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
index d2da6aa7f27d..1c06325beaca 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Helpers for controlling modem lines via GPIO
*
* Copyright (C) 2014 Paratronic S.A.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/err.h>
diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h
index fa000bcff217..b7d3cca48ede 100644
--- a/drivers/tty/serial/serial_mctrl_gpio.h
+++ b/drivers/tty/serial/serial_mctrl_gpio.h
@@ -1,18 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Helpers for controlling modem lines via GPIO
*
* Copyright (C) 2014 Paratronic S.A.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#ifndef __SERIAL_MCTRL_GPIO__
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index f80fead6c5fc..1b4008d022bf 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Derived from many drivers using generic_serial interface,
* especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c
@@ -8,10 +9,6 @@
* Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
* Copyright (C) 2000-2002 Toshiba Corporation
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller
*/
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 784dd42002ea..31fcc7072a90 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
@@ -13,10 +14,6 @@
* Modified to support SecureEdge. David McCullough (2002)
* Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
* Removed SH7300 support (Jul 2007).
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -40,6 +37,7 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
@@ -152,6 +150,7 @@ struct sci_port {
int rx_trigger;
struct timer_list rx_fifo_timer;
int rx_fifo_timeout;
+ u16 hscif_tot;
bool has_rtscts;
bool autorts;
@@ -1107,8 +1106,14 @@ static ssize_t rx_fifo_timeout_show(struct device *dev,
{
struct uart_port *port = dev_get_drvdata(dev);
struct sci_port *sci = to_sci_port(port);
+ int v;
+
+ if (port->type == PORT_HSCIF)
+ v = sci->hscif_tot >> HSSCR_TOT_SHIFT;
+ else
+ v = sci->rx_fifo_timeout;
- return sprintf(buf, "%d\n", sci->rx_fifo_timeout);
+ return sprintf(buf, "%d\n", v);
}
static ssize_t rx_fifo_timeout_store(struct device *dev,
@@ -1124,11 +1129,19 @@ static ssize_t rx_fifo_timeout_store(struct device *dev,
ret = kstrtol(buf, 0, &r);
if (ret)
return ret;
- sci->rx_fifo_timeout = r;
- scif_set_rtrg(port, 1);
- if (r > 0)
- setup_timer(&sci->rx_fifo_timer, rx_fifo_timer_fn,
- (unsigned long)sci);
+
+ if (port->type == PORT_HSCIF) {
+ if (r < 0 || r > 3)
+ return -EINVAL;
+ sci->hscif_tot = r << HSSCR_TOT_SHIFT;
+ } else {
+ sci->rx_fifo_timeout = r;
+ scif_set_rtrg(port, 1);
+ if (r > 0)
+ setup_timer(&sci->rx_fifo_timer, rx_fifo_timer_fn,
+ (unsigned long)sci);
+ }
+
return count;
}
@@ -1210,8 +1223,11 @@ static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
sg_dma_address(&s->sg_rx[0]));
dma_release_channel(chan);
- if (enable_pio)
+ if (enable_pio) {
+ spin_lock_irqsave(&port->lock, flags);
sci_start_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
}
static void sci_dma_rx_complete(void *arg)
@@ -1278,8 +1294,11 @@ static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
DMA_TO_DEVICE);
dma_release_channel(chan);
- if (enable_pio)
+ if (enable_pio) {
+ spin_lock_irqsave(&port->lock, flags);
sci_start_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
}
static void sci_submit_rx(struct sci_port *s)
@@ -1491,6 +1510,14 @@ static void sci_request_dma(struct uart_port *port)
return;
s->cookie_tx = -EINVAL;
+
+ /*
+ * Don't request a dma channel if no channel was specified
+ * in the device tree.
+ */
+ if (!of_find_property(port->dev->of_node, "dmas", NULL))
+ return;
+
chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV);
dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
if (chan) {
@@ -1980,6 +2007,7 @@ static void sci_enable_ms(struct uart_port *port)
static void sci_break_ctl(struct uart_port *port, int break_state)
{
unsigned short scscr, scsptr;
+ unsigned long flags;
/* check wheter the port has SCSPTR */
if (!sci_getreg(port, SCSPTR)->size) {
@@ -1990,6 +2018,7 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
return;
}
+ spin_lock_irqsave(&port->lock, flags);
scsptr = serial_port_in(port, SCSPTR);
scscr = serial_port_in(port, SCSCR);
@@ -2003,6 +2032,7 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
serial_port_out(port, SCSPTR, scsptr);
serial_port_out(port, SCSCR, scscr);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int sci_startup(struct uart_port *port)
@@ -2037,9 +2067,13 @@ static void sci_shutdown(struct uart_port *port)
spin_lock_irqsave(&port->lock, flags);
sci_stop_rx(port);
sci_stop_tx(port);
- /* Stop RX and TX, disable related interrupts, keep clock source */
+ /*
+ * Stop RX and TX, disable related interrupts, keep clock source
+ * and HSCIF TOT bits
+ */
scr = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, scr & (SCSCR_CKE1 | SCSCR_CKE0));
+ serial_port_out(port, SCSCR, scr &
+ (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot));
spin_unlock_irqrestore(&port->lock, flags);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -2186,7 +2220,7 @@ static void sci_reset(struct uart_port *port)
unsigned int status;
struct sci_port *s = to_sci_port(port);
- serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+ serial_port_out(port, SCSCR, s->hscif_tot); /* TE=0, RE=0, CKE1=0 */
reg = sci_getreg(port, SCFCR);
if (reg->size)
@@ -2227,6 +2261,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
int min_err = INT_MAX, err;
unsigned long max_freq = 0;
int best_clk = -1;
+ unsigned long flags;
if ((termios->c_cflag & CSIZE) == CS7)
smr_val |= SCSMR_CHR;
@@ -2336,6 +2371,8 @@ done:
serial_port_out(port, SCCKS, sccks);
}
+ spin_lock_irqsave(&port->lock, flags);
+
sci_reset(port);
uart_update_timeout(port, termios->c_cflag, baud);
@@ -2353,10 +2390,7 @@ done:
case 27: smr_val |= SCSMR_SRC_27; break;
}
smr_val |= cks;
- dev_dbg(port->dev,
- "SCR 0x%x SMR 0x%x BRR %u CKS 0x%x DL %u SRR %u\n",
- scr_val, smr_val, brr, sccks, dl, srr);
- serial_port_out(port, SCSCR, scr_val);
+ serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
serial_port_out(port, SCSMR, smr_val);
serial_port_out(port, SCBRR, brr);
if (sci_getreg(port, HSSRR)->size)
@@ -2369,8 +2403,7 @@ done:
scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0);
smr_val |= serial_port_in(port, SCSMR) &
(SCSMR_CKEDG | SCSMR_SRC_MASK | SCSMR_CKS);
- dev_dbg(port->dev, "SCR 0x%x SMR 0x%x\n", scr_val, smr_val);
- serial_port_out(port, SCSCR, scr_val);
+ serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
serial_port_out(port, SCSMR, smr_val);
}
@@ -2406,8 +2439,7 @@ done:
scr_val |= SCSCR_RE | SCSCR_TE |
(s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0));
- dev_dbg(port->dev, "SCSCR 0x%x\n", scr_val);
- serial_port_out(port, SCSCR, scr_val);
+ serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
if ((srr + 1 == 5) &&
(port->type == PORT_SCIFA || port->type == PORT_SCIFB)) {
/*
@@ -2453,8 +2485,6 @@ done:
s->rx_frame = (100 * bits * HZ) / (baud / 10);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
s->rx_timeout = DIV_ROUND_UP(s->buf_len_rx * 2 * s->rx_frame, 1000);
- dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n",
- s->rx_timeout * 1000 / HZ, port->timeout);
if (s->rx_timeout < msecs_to_jiffies(20))
s->rx_timeout = msecs_to_jiffies(20);
#endif
@@ -2462,6 +2492,8 @@ done:
if ((termios->c_cflag & CREAD) != 0)
sci_start_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+
sci_port_disable(s);
if (UART_ENABLE_MS(port, termios->c_cflag))
@@ -2773,6 +2805,7 @@ static int sci_init_single(struct platform_device *dev,
}
sci_port->rx_fifo_timeout = 0;
+ sci_port->hscif_tot = 0;
/* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't
* match the SoC datasheet, this should be investigated. Let platform
@@ -2860,7 +2893,7 @@ static void serial_console_write(struct console *co, const char *s,
ctrl_temp = SCSCR_RE | SCSCR_TE |
(sci_port->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) |
(ctrl & (SCSCR_CKE1 | SCSCR_CKE0));
- serial_port_out(port, SCSCR, ctrl_temp);
+ serial_port_out(port, SCSCR, ctrl_temp | sci_port->hscif_tot);
uart_console_write(port, s, count, serial_console_putchar);
@@ -2988,7 +3021,8 @@ static int sci_remove(struct platform_device *dev)
sysfs_remove_file(&dev->dev.kobj,
&dev_attr_rx_fifo_trigger.attr);
}
- if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB) {
+ if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB ||
+ port->port.type == PORT_HSCIF) {
sysfs_remove_file(&dev->dev.kobj,
&dev_attr_rx_fifo_timeout.attr);
}
@@ -3044,17 +3078,15 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
unsigned int *dev_id)
{
struct device_node *np = pdev->dev.of_node;
- const struct of_device_id *match;
struct plat_sci_port *p;
struct sci_port *sp;
+ const void *data;
int id;
if (!IS_ENABLED(CONFIG_OF) || !np)
return NULL;
- match = of_match_node(of_sci_match, np);
- if (!match)
- return NULL;
+ data = of_device_get_match_data(&pdev->dev);
p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
if (!p)
@@ -3070,8 +3102,8 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
sp = &sci_ports[id];
*dev_id = id;
- p->type = SCI_OF_TYPE(match->data);
- p->regtype = SCI_OF_REGTYPE(match->data);
+ p->type = SCI_OF_TYPE(data);
+ p->regtype = SCI_OF_REGTYPE(data);
sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts");
@@ -3173,7 +3205,8 @@ static int sci_probe(struct platform_device *dev)
if (ret)
return ret;
}
- if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB) {
+ if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB ||
+ sp->port.type == PORT_HSCIF) {
ret = sysfs_create_file(&dev->dev.kobj,
&dev_attr_rx_fifo_timeout.attr);
if (ret) {
@@ -3244,7 +3277,7 @@ early_platform_init_buffer("earlyprintk", &sci_driver,
early_serial_buf, ARRAY_SIZE(early_serial_buf));
#endif
#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
-static struct __init plat_sci_port port_cfg;
+static struct plat_sci_port port_cfg __initdata;
static int __init early_console_setup(struct earlycon_device *device,
int type)
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 938e23a2d166..a5f792fd48d9 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -63,6 +63,9 @@ enum {
#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */
#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */
+/* Serial Control Register, HSCIF-only bits */
+#define HSSCR_TOT_SHIFT 14
+
/* SCxSR (Serial Status Register) on SCI */
#define SCI_TDRE BIT(7) /* Transmit Data Register Empty */
#define SCI_RDRF BIT(6) /* Receive Data Register Full */
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 684cb8dd8050..9925b00a9777 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for CSR SiRFprimaII onboard UARTs.
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
*/
#include <linux/module.h>
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 43756bd9111c..004ca684d3ae 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Drivers for CSR SiRFprimaII onboard UARTs.
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
*/
#include <linux/bitops.h>
#include <linux/log2.h>
diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index 9e0e6586c698..ed78542c4c37 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -8,25 +8,6 @@
*
* Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
* Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
* Mountain View, CA 94043, or:
*
@@ -687,9 +668,7 @@ static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
* timer to poll for input and push data from the console
* buffer.
*/
- init_timer(&port->sc_timer);
- port->sc_timer.function = sn_sal_timer_poll;
- port->sc_timer.data = (unsigned long)port;
+ setup_timer(&port->sc_timer, sn_sal_timer_poll, (unsigned long)port);
if (IS_RUNNING_ON_SIMULATOR())
port->sc_interrupt_timeout = 6;
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index e902494ebbd5..828f1143859c 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012-2015 Spreadtrum Communications Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#if defined(CONFIG_SERIAL_SPRD_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index b313a792b149..c763253514e9 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* st-asc.c: ST Asynchronous serial controller (ASC) driver
*
* Copyright (C) 2003-2013 STMicroelectronics (R&D) Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
*/
#if defined(CONFIG_SERIAL_ST_ASC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 03a583264d9e..0fa735b60f2d 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) Maxime Coquelin 2015
* Copyright (C) STMicroelectronics SA 2017
* Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
* Gerald Baeza <gerald.baeza@st.com>
- * License terms: GNU General Public License (GPL), version 2
*
* Inspired by st-asc.c from STMicroelectronics (c)
*/
@@ -736,11 +736,8 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
#ifdef CONFIG_OF
static const struct of_device_id stm32_match[] = {
- { .compatible = "st,stm32-usart", .data = &stm32f4_info},
{ .compatible = "st,stm32-uart", .data = &stm32f4_info},
- { .compatible = "st,stm32f7-usart", .data = &stm32f7_info},
{ .compatible = "st,stm32f7-uart", .data = &stm32f7_info},
- { .compatible = "st,stm32h7-usart", .data = &stm32h7_info},
{ .compatible = "st,stm32h7-uart", .data = &stm32h7_info},
{},
};
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index ffc0c5285e51..8a5ff54d0f42 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) Maxime Coquelin 2015
* Copyright (C) STMicroelectronics SA 2017
* Authors: Maxime Coquelin <mcoquelin.stm32@gmail.com>
* Gerald Baeza <gerald_baeza@yahoo.fr>
- * License terms: GNU General Public License (GPL), version 2
*/
#define DRIVER_NAME "stm32-usart"
diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c
index 127472bd6a7c..70a4ea4eaa6e 100644
--- a/drivers/tty/serial/suncore.c
+++ b/drivers/tty/serial/suncore.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/* suncore.c
*
* Common SUN serial routines. Based entirely
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 46e46894e918..63e34d868de8 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/* sunhv.c: Serial driver for SUN4V hypervisor console.
*
* Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 653a076d89d3..b93d0225f8c9 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 95d34d7565c9..6cf3e9b0728f 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
*
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 252cea49c068..bc7af8b08a72 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/* sunzilog.c: Zilog serial driver for Sparc systems.
*
* Driver for Zilog serial chips found on Sun workstations and
diff --git a/drivers/tty/serial/tilegx.c b/drivers/tty/serial/tilegx.c
index 453215f5420d..f0a3ae57f881 100644
--- a/drivers/tty/serial/tilegx.c
+++ b/drivers/tty/serial/tilegx.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2013 Tilera Corporation. All Rights Reserved.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for
- * more details.
- *
* TILEGx UART driver.
*/
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 5da7fe40e391..19d38b504e27 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -1,19 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* timbuart.c timberdale FPGA UART driver
* Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Supports:
diff --git a/drivers/tty/serial/timbuart.h b/drivers/tty/serial/timbuart.h
index 7e566766bc43..fb00b172117d 100644
--- a/drivers/tty/serial/timbuart.h
+++ b/drivers/tty/serial/timbuart.h
@@ -1,19 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* timbuart.c timberdale FPGA GPIO driver
* Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Supports:
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index c9b8d702dadc..c47db7826189 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* uartlite.c: Serial driver for Xilinx uartlite serial controller
*
* Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
* Copyright (C) 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
*/
#include <linux/platform_device.h>
@@ -739,7 +736,7 @@ static int __init ulite_init(void)
err_plat:
uart_unregister_driver(&ulite_uart_driver);
err_uart:
- pr_err("registering uartlite driver failed: err=%i", ret);
+ pr_err("registering uartlite driver failed: err=%i\n", ret);
return ret;
}
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 55b702775786..2b6376e6e5ad 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Freescale QUICC Engine UART device driver
*
* Author: Timur Tabi <timur@freescale.com>
*
- * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * Copyright 2007 Freescale Semiconductor, Inc.
*
* This driver adds support for UART devices via Freescale's QUICC Engine
* found on some Freescale SOCs.
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index 439057e8107a..6d106e33f842 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for NEC VR4100 series Serial Interface Unit.
*
* Copyright (C) 2004-2008 Yoichi Yuasa <yuasa@linux-mips.org>
*
* Based on drivers/serial/8250.c, by Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 435a6f3260be..3d58e9b34553 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
*
* Based on msm_serial.c, which is:
* Copyright (C) 2007 Google, Inc.
* Author: Robert Love <rlove@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 31a630ae0870..b9b2bc76bcac 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Cadence UART driver (found in Xilinx Zynq)
*
* 2011 - 2014 (C) Xilinx Inc.
*
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2 of the License, or (at your option) any
- * later version.
- *
* This driver has originally been pushed by Xilinx using a Zynq-branding. This
* still shows in the naming of this file, the kconfig symbols and some symbols
* in the code.
@@ -1673,7 +1668,7 @@ static void __exit cdns_uart_exit(void)
uart_unregister_driver(&cdns_uart_uart_driver);
}
-module_init(cdns_uart_init);
+arch_initcall(cdns_uart_init);
module_exit(cdns_uart_exit);
MODULE_DESCRIPTION("Driver for Cadence UART");
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index d32bd499d684..b03d3e458ea2 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* zs.c: Serial port driver for IOASIC DECstations.
*
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 3be981101297..f2c34d656144 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
/*
* $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
*
@@ -13,8 +14,6 @@
*
* Original release 01/11/99
*
- * This code is released under the GNU General Public License (GPL)
- *
* This driver is primarily intended for use in synchronous
* HDLC mode. Asynchronous mode is also provided.
*
@@ -4098,8 +4097,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
if (request_dma(info->dma_level,info->device_name) < 0){
printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
__FILE__,__LINE__,info->device_name, info->dma_level );
- mgsl_release_resources( info );
- return -ENODEV;
+ goto errout;
}
info->dma_requested = true;
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 636b8ae29b46..06a03731bba7 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
/*
* Device driver for Microgate SyncLink GT serial adapters.
*
@@ -6,8 +7,6 @@
*
* Microgate and SyncLink are trademarks of Microgate Corporation
*
- * This code is released under the GNU General Public License (GPL)
- *
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 4fed9e7b281f..d45f234e1914 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
/*
* $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
*
@@ -10,7 +11,6 @@
* Microgate and SyncLink are trademarks of Microgate Corporation
*
* Derived from serial.c written by Theodore Ts'o and Linus Torvalds
- * This code is released under the GNU General Public License (GPL)
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index d008f5a75197..b674793be478 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -246,8 +246,10 @@ static void sysrq_handle_showallcpus(int key)
* architecture has no support for it:
*/
if (!trigger_all_cpu_backtrace()) {
- struct pt_regs *regs = get_irq_regs();
+ struct pt_regs *regs = NULL;
+ if (in_irq())
+ regs = get_irq_regs();
if (regs) {
pr_info("CPU%d:\n", smp_processor_id());
show_regs(regs);
@@ -266,7 +268,10 @@ static struct sysrq_key_op sysrq_showallcpus_op = {
static void sysrq_handle_showregs(int key)
{
- struct pt_regs *regs = get_irq_regs();
+ struct pt_regs *regs = NULL;
+
+ if (in_irq())
+ regs = get_irq_regs();
if (regs)
show_regs(regs);
perf_event_print_debug();
@@ -649,9 +654,9 @@ static void sysrq_parse_reset_sequence(struct sysrq_state *state)
state->reset_seq_version = sysrq_reset_seq_version;
}
-static void sysrq_do_reset(unsigned long _state)
+static void sysrq_do_reset(struct timer_list *t)
{
- struct sysrq_state *state = (struct sysrq_state *) _state;
+ struct sysrq_state *state = from_timer(state, t, keyreset_timer);
state->reset_requested = true;
@@ -668,7 +673,7 @@ static void sysrq_handle_reset_request(struct sysrq_state *state)
mod_timer(&state->keyreset_timer,
jiffies + msecs_to_jiffies(sysrq_reset_downtime_ms));
else
- sysrq_do_reset((unsigned long)state);
+ sysrq_do_reset(&state->keyreset_timer);
}
static void sysrq_detect_reset_sequence(struct sysrq_state *state,
@@ -904,8 +909,7 @@ static int sysrq_connect(struct input_handler *handler,
sysrq->handle.handler = handler;
sysrq->handle.name = "sysrq";
sysrq->handle.private = sysrq;
- setup_timer(&sysrq->keyreset_timer,
- sysrq_do_reset, (unsigned long)sysrq);
+ timer_setup(&sysrq->keyreset_timer, sysrq_do_reset, 0);
error = input_register_handle(&sysrq->handle);
if (error) {
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index df2d735338e2..e30aa6bf9ff9 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -1,10 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Creating audit events from TTY input.
*
- * Copyright (C) 2007 Red Hat, Inc. All rights reserved. This copyrighted
- * material is made available to anyone wishing to use, modify, copy, or
- * redistribute it subject to the terms and conditions of the GNU General
- * Public License v.2.
+ * Copyright (C) 2007 Red Hat, Inc. All rights reserved.
*
* Authors: Miloslav Trmac <mitr@redhat.com>
*/
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
index 5c33fd25676d..6ff8cdfc9d2a 100644
--- a/drivers/tty/tty_baudrate.c
+++ b/drivers/tty/tty_baudrate.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*/
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index f8eba1c5412f..c996b6859c5e 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Tty buffer allocation management
*/
@@ -446,7 +447,7 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
* Callers other than flush_to_ldisc() need to exclude the kworker
* from concurrent use of the line discipline, see paste_selection().
*
- * Returns the number of bytes not processed
+ * Returns the number of bytes processed
*/
int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p,
char *f, int count)
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 94cccb6efa32..dc60aeea87d8 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index efa96e6c4c1b..d9b561d89432 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c
index e7032309ee87..c4ecd66fafef 100644
--- a/drivers/tty/tty_jobctrl.c
+++ b/drivers/tty/tty_jobctrl.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 84a8ac2a779f..24ec5c7e6b20 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kmod.h>
diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c
index 52b7baef4f7a..37a91b3df980 100644
--- a/drivers/tty/tty_ldsem.c
+++ b/drivers/tty/tty_ldsem.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Ldisc rw semaphore
*
@@ -22,9 +23,6 @@
* Michel Lespinasse <walken@google.com>.
*
* Copyright (C) 2013 Peter Hurley <peter@hurleysoftware.com>
- *
- * This file may be redistributed under the terms of the GNU General Public
- * License v2.
*/
#include <linux/list.h>
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 6b137194069f..25d736880013 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Tty port functions
*/
@@ -78,7 +79,7 @@ EXPORT_SYMBOL(tty_port_init);
* @driver: tty_driver for this device
* @index: index of the tty
*
- * Provide the tty layer wit ha link from a tty (specified by @index) to a
+ * Provide the tty layer with a link from a tty (specified by @index) to a
* tty_port (@port). Use this only if neither tty_port_register_device nor
* tty_port_install is used in the driver. If used, this has to be called before
* tty_register_driver.
@@ -235,7 +236,7 @@ EXPORT_SYMBOL(tty_port_free_xmit_buf);
/**
* tty_port_destroy -- destroy inited port
- * @port: tty port to be doestroyed
+ * @port: tty port to be destroyed
*
* When a port was initialized using tty_port_init, one has to destroy the
* port by this function. Either indirectly by using tty_port refcounting
diff --git a/drivers/tty/vcc.c b/drivers/tty/vcc.c
index ef01d24858cd..58b454c34560 100644
--- a/drivers/tty/vcc.c
+++ b/drivers/tty/vcc.c
@@ -361,17 +361,13 @@ done:
return rv;
}
-static void vcc_rx_timer(unsigned long index)
+static void vcc_rx_timer(struct timer_list *t)
{
+ struct vcc_port *port = from_timer(port, t, rx_timer);
struct vio_driver_state *vio;
- struct vcc_port *port;
unsigned long flags;
int rv;
- port = vcc_get_ne(index);
- if (!port)
- return;
-
spin_lock_irqsave(&port->lock, flags);
port->rx_timer.expires = 0;
@@ -391,18 +387,14 @@ done:
vcc_put(port, false);
}
-static void vcc_tx_timer(unsigned long index)
+static void vcc_tx_timer(struct timer_list *t)
{
- struct vcc_port *port;
+ struct vcc_port *port = from_timer(port, t, tx_timer);
struct vio_vcc *pkt;
unsigned long flags;
int tosend = 0;
int rv;
- port = vcc_get_ne(index);
- if (!port)
- return;
-
spin_lock_irqsave(&port->lock, flags);
port->tx_timer.expires = 0;
@@ -645,13 +637,8 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
if (rv)
goto free_domain;
- init_timer(&port->rx_timer);
- port->rx_timer.function = vcc_rx_timer;
- port->rx_timer.data = port->index;
-
- init_timer(&port->tx_timer);
- port->tx_timer.function = vcc_tx_timer;
- port->tx_timer.data = port->index;
+ timer_setup(&port->rx_timer, vcc_rx_timer, 0);
+ timer_setup(&port->tx_timer, vcc_tx_timer, 0);
dev_set_drvdata(&vdev->dev, port);
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index a5f88cf0f61d..722a6690c70d 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* consolemap.c
*
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index f974d6340d04..c8d90d7e7e37 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Written for linux by Johan Myreen as a translation from
* the assembly version by Linus (with diacriticals added)
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 602d71630952..bce4c71cb338 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
@@ -102,6 +103,7 @@
#include <linux/uaccess.h>
#include <linux/kdb.h>
#include <linux/ctype.h>
+#include <linux/bsearch.h>
#define MAX_NR_CON_DRIVER 16
@@ -2142,22 +2144,15 @@ struct interval {
uint32_t last;
};
-static int bisearch(uint32_t ucs, const struct interval *table, int max)
+static int ucs_cmp(const void *key, const void *elt)
{
- int min = 0;
- int mid;
+ uint32_t ucs = *(uint32_t *)key;
+ struct interval e = *(struct interval *) elt;
- if (ucs < table[0].first || ucs > table[max].last)
- return 0;
- while (max >= min) {
- mid = (min + max) / 2;
- if (ucs > table[mid].last)
- min = mid + 1;
- else if (ucs < table[mid].first)
- max = mid - 1;
- else
- return 1;
- }
+ if (ucs > e.last)
+ return 1;
+ else if (ucs < e.first)
+ return -1;
return 0;
}
@@ -2169,7 +2164,12 @@ static int is_double_width(uint32_t ucs)
{ 0xFE10, 0xFE19 }, { 0xFE30, 0xFE6F }, { 0xFF00, 0xFF60 },
{ 0xFFE0, 0xFFE6 }, { 0x20000, 0x2FFFD }, { 0x30000, 0x3FFFD }
};
- return bisearch(ucs, double_width, ARRAY_SIZE(double_width) - 1);
+ if (ucs < double_width[0].first ||
+ ucs > double_width[ARRAY_SIZE(double_width) - 1].last)
+ return 0;
+
+ return bsearch(&ucs, double_width, ARRAY_SIZE(double_width),
+ sizeof(struct interval), ucs_cmp) != NULL;
}
static void con_flush(struct vc_data *vc, unsigned long draw_from,
@@ -2205,7 +2205,7 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co
console_lock();
vc = tty->driver_data;
if (vc == NULL) {
- printk(KERN_ERR "vt: argh, driver_data is NULL !\n");
+ pr_err("vt: argh, driver_data is NULL !\n");
console_unlock();
return 0;
}
@@ -3190,20 +3190,21 @@ static int do_bind_con_driver(const struct consw *csw, int first, int last,
pr_info("Console: switching ");
if (!deflt)
- printk(KERN_CONT "consoles %d-%d ", first+1, last+1);
+ pr_cont("consoles %d-%d ", first + 1, last + 1);
if (j >= 0) {
struct vc_data *vc = vc_cons[j].d;
- printk(KERN_CONT "to %s %s %dx%d\n",
- vc->vc_can_do_color ? "colour" : "mono",
- desc, vc->vc_cols, vc->vc_rows);
+ pr_cont("to %s %s %dx%d\n",
+ vc->vc_can_do_color ? "colour" : "mono",
+ desc, vc->vc_cols, vc->vc_rows);
if (k >= 0) {
vc = vc_cons[k].d;
update_screen(vc);
}
- } else
- printk(KERN_CONT "to %s\n", desc);
+ } else {
+ pr_cont("to %s\n", desc);
+ }
retval = 0;
err:
@@ -3622,9 +3623,8 @@ static int do_register_con_driver(const struct consw *csw, int first, int last)
con_driver, con_dev_groups,
"vtcon%i", con_driver->node);
if (IS_ERR(con_driver->dev)) {
- printk(KERN_WARNING "Unable to create device for %s; "
- "errno = %ld\n", con_driver->desc,
- PTR_ERR(con_driver->dev));
+ pr_warn("Unable to create device for %s; errno = %ld\n",
+ con_driver->desc, PTR_ERR(con_driver->dev));
con_driver->dev = NULL;
} else {
vtconsole_init_device(con_driver);
@@ -3761,8 +3761,8 @@ static int __init vtconsole_class_init(void)
vtconsole_class = class_create(THIS_MODULE, "vtconsole");
if (IS_ERR(vtconsole_class)) {
- printk(KERN_WARNING "Unable to create vt console class; "
- "errno = %ld\n", PTR_ERR(vtconsole_class));
+ pr_warn("Unable to create vt console class; errno = %ld\n",
+ PTR_ERR(vtconsole_class));
vtconsole_class = NULL;
}
@@ -3778,9 +3778,8 @@ static int __init vtconsole_class_init(void)
"vtcon%i", con->node);
if (IS_ERR(con->dev)) {
- printk(KERN_WARNING "Unable to create "
- "device for %s; errno = %ld\n",
- con->desc, PTR_ERR(con->dev));
+ pr_warn("Unable to create device for %s; errno = %ld\n",
+ con->desc, PTR_ERR(con->dev));
con->dev = NULL;
} else {
vtconsole_init_device(con);
@@ -4121,37 +4120,45 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op)
return -EINVAL;
if (op->charcount > 512)
return -EINVAL;
+ if (op->width <= 0 || op->width > 32 || op->height > 32)
+ return -EINVAL;
+ size = (op->width+7)/8 * 32 * op->charcount;
+ if (size > max_font_size)
+ return -ENOSPC;
+
+ font.data = memdup_user(op->data, size);
+ if (IS_ERR(font.data))
+ return PTR_ERR(font.data);
+
if (!op->height) { /* Need to guess font height [compat] */
int h, i;
- u8 __user *charmap = op->data;
- u8 tmp;
-
- /* If from KDFONTOP ioctl, don't allow things which can be done in userland,
- so that we can get rid of this soon */
- if (!(op->flags & KD_FONT_FLAG_OLD))
+ u8 *charmap = font.data;
+
+ /*
+ * If from KDFONTOP ioctl, don't allow things which can be done
+ * in userland,so that we can get rid of this soon
+ */
+ if (!(op->flags & KD_FONT_FLAG_OLD)) {
+ kfree(font.data);
return -EINVAL;
+ }
+
for (h = 32; h > 0; h--)
- for (i = 0; i < op->charcount; i++) {
- if (get_user(tmp, &charmap[32*i+h-1]))
- return -EFAULT;
- if (tmp)
+ for (i = 0; i < op->charcount; i++)
+ if (charmap[32*i+h-1])
goto nonzero;
- }
+
+ kfree(font.data);
return -EINVAL;
+
nonzero:
op->height = h;
}
- if (op->width <= 0 || op->width > 32 || op->height > 32)
- return -EINVAL;
- size = (op->width+7)/8 * 32 * op->charcount;
- if (size > max_font_size)
- return -ENOSPC;
+
font.charcount = op->charcount;
- font.height = op->height;
font.width = op->width;
- font.data = memdup_user(op->data, size);
- if (IS_ERR(font.data))
- return PTR_ERR(font.data);
+ font.height = op->height;
+
console_lock();
if (vc->vc_mode != KD_TEXT)
rc = -EINVAL;
diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c
index 2da657848cfc..d0cf1c50bb6c 100644
--- a/fs/proc/proc_tty.c
+++ b/fs/proc/proc_tty.c
@@ -15,6 +15,7 @@
#include <linux/tty.h>
#include <linux/seq_file.h>
#include <linux/bitops.h>
+#include "internal.h"
/*
* The /proc/tty directory inodes...
@@ -165,7 +166,7 @@ void proc_tty_unregister_driver(struct tty_driver *driver)
if (!ent)
return;
- remove_proc_entry(driver->driver_name, proc_tty_driver);
+ remove_proc_entry(ent->name, proc_tty_driver);
driver->proc_entry = NULL;
}
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index fa1505292f6c..f849be28e082 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -211,7 +211,7 @@ struct acpi_device_flags {
u32 of_compatible_ok:1;
u32 coherent_dma:1;
u32 cca_seen:1;
- u32 spi_i2c_slave:1;
+ u32 serial_bus_slave:1;
u32 reserved:19;
};
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 83925bd12c0b..05ee0f19448a 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -157,6 +157,9 @@ struct cyclades_port {
struct cyclades_icount icount;
struct completion shutdown_wait;
int throttle;
+#ifdef CONFIG_CYZ_INTR
+ struct timer_list rx_full_timer;
+#endif
};
#define CLOSING_WAIT_DELAY 30*HZ
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 5553e04e59c9..37b044e78333 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -501,4 +501,9 @@ static inline int uart_handle_break(struct uart_port *port)
(cflag) & CRTSCTS || \
!((cflag) & CLOCAL))
+/*
+ * Common device tree parsing helpers
+ */
+void of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf);
+
#endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 619fe6111dc9..be07b5470f4b 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -158,6 +158,7 @@
*/
#define UART_DLL 0 /* Out: Divisor Latch Low */
#define UART_DLM 1 /* Out: Divisor Latch High */
+#define UART_DIV_MAX 0xFFFF /* Max divisor value */
/*
* LCR=0xBF (or DLAB=1 for 16C660)