Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st set of new IIO/counter device support, features and cleanup for 5.14

There are a couple of large cleanup sets in here alongside a number of new
drivers.

Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.

Counters
========

New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
  - New driver.

IIO
===

New device support
* amstaos,tsl2591 ambient light sensor.
  - New driver + bindings
  - Follow up fix to ensure some local variables are suitable for error
    handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
  - New driver + bindings
  - Includes an errata work around that cause a build bot failure fixed
    by adding a stub to i2c.
* kionix,kxcjk-1013
  - Add support for KX023-1025 device.  Mostly a different register map
    that needed to be supported.
* murata,sca3300 accelerometer
  - New driver + bindings
* st,lsm9ds0 IMU
  - Rework of st,sensors driver to cleanly support this new glue driver
    that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
  - New driver. Intent here is to use this with existing IIO consumer
    drivers such as resistive-adc-touch.
  - Follow up fix to avoid an issue with unsigned subtraction in error
    check.
* ti,tmp117 digital temperature sensor
  - New driver + bindings

Features
* adi,ad5755
  - Add missing dt-binding doc
* adi,ad7298
  - Add ACPI ID used on Intel Galileo Gen 1 boards.
  - Add missing dt-binding doc
* adi,ad7476
  - Add missing dt-binding doc
* adi,ad7746
  - Add missing dt-binding doc for this driver that will hopefully move out
    of staging shortly. Update staging driver to use the binding instead of
    platform data.
* adi,adis16201 + adis16209
  - Add missing dt-binding doc
* adi,adis16480
  - Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
  - Add missing dt-binding doc
* fsl,mma7455
  - Add missing dt-binding doc
* iio-rescale
  - Support handling of processed channels from provider.  Some ADCs
    require (typically non linear) calibration functions to be applied,
    and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
    used as providers to the iio-rescale driver which needs to handle them
    somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
  - Support the serial interface.  Note this required significant
    refactoring of existing driver.
* st,st-sensors
  - Add mount matrix support for normal dt-binding whilst continuing to
    support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
  - Add missing dt-binding doc
* trivial-devices - add entries for
  - memsic,mx4005, memsic,mx6255 and memsic,mxc6655
  - sensortek,stk8312 and sensortek,stk8ba50

Cleanup / minor fixes
* core
  - Use devm_add_action_or_reset() to replace boilerplate in several
    driver and core IIO devm_* functions.
  - Fix an error path issue introduced by above, that could return an
    error pointer rather than the expected null from dev_iio_device_alloc()
  - Move more IIO internals related fields from struct iio_dev to
    struct iio_dev_opaque.
  - Drop unused final update of in_loc in demux setup.
* Docs
  - Move some docs from driver specific to core dos to avoid replication
    of names which the documentation builder does not allow.
    Note this means adding a few device specific notes to the general docs
    to cover the more unusual uses of the ABI.
  - ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
    have the bufferX/* variant.  Not we are not getting rid of these
    interfaces, just encouraging new code to use the new interface.
* IIO wide:
  - Tidy up new cases of dev.parent etc being set in drivers as the core
    now does it.
  - Fix more cases of possible miss-aligned buffers when passed to
    iio_push_to_buffers_with_timestamp().  Note we only have one known
    instance of anyone seeing this bug actually happening, so this has been
    a low priority cleanup effort for several cycles.
  - sysfs_emit() used in more drivers.
  - Runtime pm tidy up and use of pm_runtime_resume_and_get()
  - Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
    that the timestamp when inserted by naturally aligned + consumers can
    assume that all fields are naturally aligned. Part of a long running
    effort, with at least 2 more series to come tackling additional
    variants.
  - Stop specifying "mount-matrix" property name in every lookup of the
    mount matrix from firmware by hard coding it in the core.
* adi,ad7476
  - Handle the variety of different regulators used by the parts supported
    by this driver (came up in dt-binding review)
* adi,ad7746
  - Trivial drop of if (ret) return ret; return 0; pattern
  - Tidy up comments
  - Pull capdac setup out to own function.
* adi,ad7766
  - Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
  - Avoid returning error codes in interrupt handlers.
  - Handle a failure in spi_write in the trigger handler.
  - Rework to add updating of device page after changing it.
  - Don't push data to IIO buffers when read failed.
  - Add configuration of burst max speed to core avoid handling this in
    each driver.
  - Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
  - Excessive includes cleanup via include-what-you-use static checker
    after zero day highlighted that these needed updating.
* afe
  - Amend binding to add #io-channel-cells, thus allowing this IIO
    consumer to also be an IIO provider.
* aosong,am2315
  - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
    ACPI naming.
* bosch,bma180
  - Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
  - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
    ACPI naming.
* ep93xx_adc,
  - Drop a redundant error print.
* maxim,max118
  - Convert remainder of probe() to devm_ managed functions.
  - Avoid some repeated jumping back and forth between iio_dev and
    spi structures.
* maxim,max11100
  - Use get_unaligned_be16() instead of open coding.
  - Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
  - Unused error value dropped.
* sensiron,sgp30
  - Drop use of %hx in favor of %x and letting the normal type conversion
    work.
* sensortek,stk8312
  - Add lowercase device id and note uppercase version deprecated.
  - Drop ACPI id. Unlikely this one is in the wild and it isn't valid
    ACPI naming.
* sprx,sc72xx_adc
  - add MODULE_DEVICE_TABLE
* st,lsm6dsx
  - Fix docs of valid ODRs
* st,sensors
  - dt-binding rework.  Two efforts on this crossed in a previous cycle
    so this update cherry picks the best of the two yaml conversions.
  - Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
  - tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
  - Convert remainder of probe() functions to devm_ managed functions
    to simplify error handing and remove paths.

* tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits)
  i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  iio: adis: Cleanout unused headers
  iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
  counter: Add support for Intel Quadrature Encoder Peripheral
  staging: iio: cdc: ad7746: extract capac setup to own function
  staging: iio: cdc: ad7746: clean up probe return
  staging: iio: cdc: ad7746: remove ordinary comments
  iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
  iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
  iio: adc: ti-adc0832: Use devm managed functions for all of probe()
  iio: adc: ti-adc081c: Use devm managed functions for all of probe()
  iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
  iio: adc: max1118: Use devm_ managed functions for all of probe
  iio: adc: max11100: Use devm_ functions for rest of probe()
  iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
  iio: chemical: sgp30: Drop use of %hx in format string.
  iio: gyro: st_gyro: Support mount matrix
  iio: magnetometer: st_magn: Support mount matrix
  iio: accel: st_sensors: Stop copying channels
  iio: accel: st_sensors: Support generic mounting matrix
  ...

6 files changed, 57 insertions, 151 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 566bd99fe0a5..e9d9e50f03be 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -193,6 +193,15 @@ Description:
 		both edges:
 			Any state transition.
 
+What:		/sys/bus/counter/devices/counterX/countY/spike_filter_ns
+KernelVersion:	5.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If the counter device supports programmable spike filter this
+		attribute indicates the value in nanoseconds where noise pulses
+		shorter or equal to configured value are ignored. Value 0 means
+		filter is disabled.
+
 What:		/sys/bus/counter/devices/counterX/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 267973541e72..29c1097c5722 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -455,6 +455,19 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Hardware applied calibration offset (assumed to fix production
 		inaccuracies).
+		icm42600: For this device values are real physical offsets
+		expressed in SI units (m/s^2 for accelerometers and rad/s
+		for gyroscope)/
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
+KernelVersion:  5.8
+Contact:        linux-iio@vger.kernel.org
+Description:
+		Available values of calibbias. Maybe expressed as either of:
+
+		- a small discrete set of values like "0 2 4 6 8"
+		- a range specified as "[min step max]"
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
@@ -652,6 +665,25 @@ Description:
 		Output frequency for channel Y in Hz. The number must always be
 		specified and unique if the output corresponds to a single
 		channel.
+		Some drivers have additional constraints:
+		ADF4371 has an integrated VCO with fundamendal output
+		frequency ranging from 4000000000 Hz 8000000000 Hz.
+
+		out_altvoltage0_frequency:
+			A divide by 1, 2, 4, 8, 16, 32 or circuit generates
+			frequencies from 62500000 Hz to 8000000000 Hz.
+		out_altvoltage1_frequency:
+			This channel duplicates the channel 0 frequency
+		out_altvoltage2_frequency:
+			A frequency doubler generates frequencies from
+			8000000000 Hz to 16000000000 Hz.
+		out_altvoltage3_frequency:
+			A frequency quadrupler generates frequencies from
+			16000000000 Hz to 32000000000 Hz.
+
+		Note: writes to one of the channels will affect the frequency of
+		all the other channels, since it involves changing the VCO
+		fundamental output frequency.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
 KernelVersion:	3.4.0
@@ -663,6 +695,17 @@ Description:
 		specified and unique if the output corresponds to a single
 		channel.
 
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set/get output current for channel Y. Units after application
+		of scale and offset are milliamps.
+		For some devices current channels are used to specify
+		current supplied to elements used in taking a measurement
+		of a different type. E.g. LED currents.
+
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
@@ -1195,16 +1238,12 @@ Description:
 		The name of the trigger source being used, as per string given
 		in /sys/class/iio/triggerY/name.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
-KernelVersion:	2.6.35
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/length
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Number of scans contained by the buffer.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
-KernelVersion:	2.6.35
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/enable
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -1212,8 +1251,6 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.
 
-What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
-KernelVersion:	2.6.37
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -1224,34 +1261,6 @@ Description:
 		Since kernel 5.11 the scan_elements attributes are merged into
 		the bufferY directory, to be configurable per buffer.
 
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_en
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
-What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_en
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_en
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_en
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_en
-What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_en
-What:		/sys/.../iio:deviceX/scan_elements/in_pressure_en
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en
-What:		/sys/.../iio:deviceX/scan_elements/in_proximity_en
-KernelVersion:	2.6.37
 What:		/sys/.../iio:deviceX/bufferY/in_accel_x_en
 What:		/sys/.../iio:deviceX/bufferY/in_accel_y_en
 What:		/sys/.../iio:deviceX/bufferY/in_accel_z_en
@@ -1284,23 +1293,6 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Scan element control for triggered data capture.
 
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_type
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_type
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_type
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_type
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_type
-What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_type
-What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_type
-What:		/sys/.../iio:deviceX/scan_elements/in_pressure_type
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type
-What:		/sys/.../iio:deviceX/scan_elements/in_proximity_type
-KernelVersion:	2.6.37
 What:		/sys/.../iio:deviceX/bufferY/in_accel_type
 What:		/sys/.../iio:deviceX/bufferY/in_anglvel_type
 What:		/sys/.../iio:deviceX/bufferY/in_magn_type
@@ -1347,33 +1339,6 @@ Description:
 		If the type parameter can take one of a small set of values,
 		this attribute lists them.
 
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_i_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_q_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_i_index
-What:		/sys/.../iio:deviceX/scan_elements/in_voltage_q_index
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_accel_z_index
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
-What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
-What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
-What:		/sys/.../iio:deviceX/scan_elements/in_pressureY_index
-What:		/sys/.../iio:deviceX/scan_elements/in_pressure_index
-What:		/sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index
-What:		/sys/.../iio:deviceX/scan_elements/in_proximity_index
-KernelVersion:	2.6.37
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_index
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_supply_index
 What:		/sys/.../iio:deviceX/bufferY/in_voltageY_i_index
@@ -1613,8 +1578,6 @@ Description:
 		Specifies number of seconds in which we compute the steps
 		that occur in order to decide if the consumer is making steps.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/watermark
-KernelVersion:	4.2
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/watermark
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -1633,8 +1596,6 @@ Description:
 		the available samples after the timeout expires and thus have a
 		maximum delay guarantee.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
-KernelVersion: 4.16
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY/data_available
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
index 544548ee794c..7fe6935d1448 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371
@@ -1,28 +1,3 @@
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Stores the PLL frequency in Hz for channel Y.
-		Reading returns the actual frequency in Hz.
-		The ADF4371 has an integrated VCO with fundamendal output
-		frequency ranging from 4000000000 Hz 8000000000 Hz.
-
-		out_altvoltage0_frequency:
-			A divide by 1, 2, 4, 8, 16, 32 or circuit generates
-			frequencies from 62500000 Hz to 8000000000 Hz.
-		out_altvoltage1_frequency:
-			This channel duplicates the channel 0 frequency
-		out_altvoltage2_frequency:
-			A frequency doubler generates frequencies from
-			8000000000 Hz to 16000000000 Hz.
-		out_altvoltage3_frequency:
-			A frequency quadrupler generates frequencies from
-			16000000000 Hz to 32000000000 Hz.
-
-		Note: writes to one of the channels will affect the frequency of
-		all the other channels, since it involves changing the VCO
-		fundamental output frequency.
-
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
@@ -34,11 +9,3 @@ Description:
 		  out_altvoltage2_name: RF16x
 		  out_altvoltage3_name: RF32x
 
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute allows the user to power down the PLL and it's
-		RFOut buffers.
-		Writing 1 causes the specified channel to power down.
-		Clearing returns to normal operation.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
index 66b621f10223..a8e04b41d9ff 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
+++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
@@ -18,6 +18,8 @@ Description:
 		respectively which simply helper channels containing the
 		calculated difference in the value of stage 1 - 2 and 3 - 4.
 		The values are expressed in 24-bit twos complement.
+		The LED current for the stage is controlled via
+		out_currentY_raw.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
 Date:		May 2016
@@ -35,11 +37,3 @@ Contact:	Andrew F. Davis <afd@ti.com>
 Description:
 		Get and set the resistance and the capacitance settings for the
 		Transimpedance Amplifier during the associated stage.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
-Date:		May 2016
-KernelVersion:
-Contact:	Andrew F. Davis <afd@ti.com>
-Description:
-		Get and set the LED current for the specified LED active during
-		this stage. Y is the specific stage number.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-icm42600 b/Documentation/ABI/testing/sysfs-bus-iio-icm42600
deleted file mode 100644
index 0bf1fd4f5bf1..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-icm42600
+++ /dev/null
@@ -1,20 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
-KernelVersion:  5.8
-Contact:        linux-iio@vger.kernel.org
-Description:
-		Hardware applied calibration offset (assumed to fix production
-		inaccuracies). Values represent a real physical offset expressed
-		in SI units (m/s^2 for accelerometer and rad/s for gyroscope).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
-KernelVersion:  5.8
-Contact:        linux-iio@vger.kernel.org
-Description:
-		Range of available values for hardware offset. Values in SI
-		units (m/s^2 for accelerometer and rad/s for gyroscope).
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
index 22c5ea670971..c476d48d0f82 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als
@@ -41,14 +41,6 @@ Description:
 		Get the current light zone (0..4) as defined by the
 		in_illuminance0_threshY_{falling,rising} thresholds.
 
-What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
-Date:		May 2012
-KernelVersion:	3.5
-Contact:	Johan Hovold <jhovold@gmail.com>
-Description:
-		Get output current for channel Y (0..255), that is,
-		out_currentY_currentZ_raw, where Z is the current zone.
-
 What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
 Date:		May 2012
 KernelVersion:	3.5
@@ -59,3 +51,6 @@ Description:
 
 		These values correspond to the ALS-mapper target registers for
 		ALS-mapper Y + 1.
+
+		Note that out_currentY_raw provides the current for the
+		current zone.