summaryrefslogtreecommitdiff
path: root/Documentation/driver-api
diff options
context:
space:
mode:
authorMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>2021-06-03 08:41:03 +0300
committerMark Brown <broonie@kernel.org>2021-06-21 15:08:37 +0300
commitdb0aeb4f074f7023da26fb65078197c39590346b (patch)
treedc26205ecdcc5f435ff2d8f37bf06372f6073dbf /Documentation/driver-api
parentdfa19b11385d4cf8f0242fd93e2073e25183c331 (diff)
downloadlinux-db0aeb4f074f7023da26fb65078197c39590346b.tar.xz
thermal: Use generic HW-protection shutdown API
The hardware shutdown function was exported from kernel/reboot for other subsystems to use. Logic is copied from the thermal_core. The protection mutex is replaced by an atomic_t to allow calls also from an IRQ context. Also the WARN() was replaced by pr_emerg() based on discussions here: https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/ and here: https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/ Use the exported API instead of implementing own just for the thermal_core. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/5531e89d9e710f5d10e7cdce3ee58957335b9e03.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'Documentation/driver-api')
-rw-r--r--Documentation/driver-api/thermal/sysfs-api.rst24
1 files changed, 9 insertions, 15 deletions
diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
index 4b638c14bc16..c93fa5e961a0 100644
--- a/Documentation/driver-api/thermal/sysfs-api.rst
+++ b/Documentation/driver-api/thermal/sysfs-api.rst
@@ -740,21 +740,15 @@ possible.
5. thermal_emergency_poweroff
=============================
-On an event of critical trip temperature crossing. Thermal framework
-allows the system to shutdown gracefully by calling orderly_poweroff().
-In the event of a failure of orderly_poweroff() to shut down the system
-we are in danger of keeping the system alive at undesirably high
-temperatures. To mitigate this high risk scenario we program a work
-queue to fire after a pre-determined number of seconds to start
-an emergency shutdown of the device using the kernel_power_off()
-function. In case kernel_power_off() fails then finally
-emergency_restart() is called in the worst case.
+On an event of critical trip temperature crossing the thermal framework
+shuts down the system by calling hw_protection_shutdown(). The
+hw_protection_shutdown() first attempts to perform an orderly shutdown
+but accepts a delay after which it proceeds doing a forced power-off
+or as last resort an emergency_restart.
The delay should be carefully profiled so as to give adequate time for
-orderly_poweroff(). In case of failure of an orderly_poweroff() the
-emergency poweroff kicks in after the delay has elapsed and shuts down
-the system.
+orderly poweroff.
-If set to 0 emergency poweroff will not be supported. So a carefully
-profiled non-zero positive value is a must for emergency poweroff to be
-triggered.
+If the delay is set to 0 emergency poweroff will not be supported. So a
+carefully profiled non-zero positive value is a must for emergency
+poweroff to be triggered.