summaryrefslogtreecommitdiff
path: root/Documentation/i2c
diff options
context:
space:
mode:
authorLuca Ceresoli <luca@lucaceresoli.net>2020-01-29 18:19:47 +0300
committerWolfram Sang <wsa@the-dreams.de>2020-01-30 00:01:54 +0300
commit22714ef85478f7ff3a2dfd3e2bc854b72271ab8f (patch)
treee7367971f36f8e6e656f74d441d69788b206cfb6 /Documentation/i2c
parentda9a80bf1976148cfb26feebe34b626cd460f3d3 (diff)
downloadlinux-22714ef85478f7ff3a2dfd3e2bc854b72271ab8f.tar.xz
docs: i2c: instantiating-devices: use monospace for sysfs attributes
Use a monospace (literal) formatting for better readability of sysfs attributes. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'Documentation/i2c')
-rw-r--r--Documentation/i2c/instantiating-devices.rst14
1 files changed, 7 insertions, 7 deletions
diff --git a/Documentation/i2c/instantiating-devices.rst b/Documentation/i2c/instantiating-devices.rst
index 665bf00792ba..e558e0a77e0c 100644
--- a/Documentation/i2c/instantiating-devices.rst
+++ b/Documentation/i2c/instantiating-devices.rst
@@ -225,15 +225,15 @@ In general, the kernel should know which I2C devices are connected and
what addresses they live at. However, in certain cases, it does not, so a
sysfs interface was added to let the user provide the information. This
interface is made of 2 attribute files which are created in every I2C bus
-directory: new_device and delete_device. Both files are write only and you
-must write the right parameters to them in order to properly instantiate,
-respectively delete, an I2C device.
+directory: ``new_device`` and ``delete_device``. Both files are write
+only and you must write the right parameters to them in order to properly
+instantiate, respectively delete, an I2C device.
-File new_device takes 2 parameters: the name of the I2C device (a string)
-and the address of the I2C device (a number, typically expressed in
-hexadecimal starting with 0x, but can also be expressed in decimal.)
+File ``new_device`` takes 2 parameters: the name of the I2C device (a
+string) and the address of the I2C device (a number, typically expressed
+in hexadecimal starting with 0x, but can also be expressed in decimal.)
-File delete_device takes a single parameter: the address of the I2C
+File ``delete_device`` takes a single parameter: the address of the I2C
device. As no two devices can live at the same address on a given I2C
segment, the address is sufficient to uniquely identify the device to be
deleted.