summaryrefslogtreecommitdiff
path: root/Documentation/input
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-02-01 21:49:58 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-02-01 21:49:58 +0300
commiteea43ed86f38347979446905a20792a8be7bf5d1 (patch)
tree74a3496eca9596e5502483f8e6bd95936d277057 /Documentation/input
parentf6cff79f1d122f78a4b35bf4b2f0112afcd89ea4 (diff)
parentd67ad78e09cbb9935c74a40b85c5abe5b9cd48f8 (diff)
downloadlinux-eea43ed86f38347979446905a20792a8be7bf5d1.tar.xz
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov: - evdev interface has been adjusted to extend the life of timestamps on 32 bit systems to the year of 2108 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to improve chances of detecting trackpoints on the pass-through port - mms114 touchcsreen controller driver has been updated to support generic device properties and work with mms152 cntrollers - Goodix driver now supports generic touchscreen properties - couple of drivers for AVR32 architecture are gone as the architecture support has been removed from the kernel - gpio-tilt driver has been removed as there are no mainline users and the driver itself is using legacy APIs and relies on platform data - MODULE_LINECSE/MODULE_VERSION cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: goodix - use generic touchscreen_properties Input: mms114 - fix typo in definition Input: mms114 - use BIT() macro instead of explicit shifting Input: mms114 - replace mdelay with msleep Input: mms114 - add support for mms152 Input: mms114 - drop platform data and use generic APIs Input: mms114 - mark as direct input device Input: mms114 - do not clobber interrupt trigger Input: edt-ft5x06 - fix error handling for factory mode on non-M06 Input: stmfts - set IRQ_NOAUTOEN to the irq flag Input: auo-pixcir-ts - delete an unnecessary return statement Input: auo-pixcir-ts - remove custom log for a failed memory allocation Input: da9052_tsi - remove unused mutex Input: docs - use PROPERTY_ENTRY_U32() directly Input: synaptics-rmi4 - log when we create a guest serio port Input: synaptics-rmi4 - unmask F03 interrupts when port is opened Input: synaptics-rmi4 - do not delete interrupt memory too early Input: ad7877 - use managed resource allocations Input: stmfts,s6sy671 - add SPDX identifier Input: remove atmel-wm97xx touchscreen driver ...
Diffstat (limited to 'Documentation/input')
-rw-r--r--Documentation/input/devices/gpio-tilt.rst103
-rw-r--r--Documentation/input/devices/rotary-encoder.rst6
-rw-r--r--Documentation/input/ff.rst6
3 files changed, 6 insertions, 109 deletions
diff --git a/Documentation/input/devices/gpio-tilt.rst b/Documentation/input/devices/gpio-tilt.rst
deleted file mode 100644
index fa6e64570aa7..000000000000
--- a/Documentation/input/devices/gpio-tilt.rst
+++ /dev/null
@@ -1,103 +0,0 @@
-Driver for tilt-switches connected via GPIOs
-============================================
-
-Generic driver to read data from tilt switches connected via gpios.
-Orientation can be provided by one or more than one tilt switches,
-i.e. each tilt switch providing one axis, and the number of axes
-is also not limited.
-
-
-Data structures
----------------
-
-The array of struct gpio in the gpios field is used to list the gpios
-that represent the current tilt state.
-
-The array of struct gpio_tilt_axis describes the axes that are reported
-to the input system. The values set therein are used for the
-input_set_abs_params calls needed to init the axes.
-
-The array of struct gpio_tilt_state maps gpio states to the corresponding
-values to report. The gpio state is represented as a bitfield where the
-bit-index corresponds to the index of the gpio in the struct gpio array.
-In the same manner the values stored in the axes array correspond to
-the elements of the gpio_tilt_axis-array.
-
-
-Example
--------
-
-Example configuration for a single TS1003 tilt switch that rotates around
-one axis in 4 steps and emits the current tilt via two GPIOs::
-
- static int sg060_tilt_enable(struct device *dev) {
- /* code to enable the sensors */
- };
-
- static void sg060_tilt_disable(struct device *dev) {
- /* code to disable the sensors */
- };
-
- static struct gpio sg060_tilt_gpios[] = {
- { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
- { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
- };
-
- static struct gpio_tilt_state sg060_tilt_states[] = {
- {
- .gpios = (0 << 1) | (0 << 0),
- .axes = (int[]) {
- 0,
- },
- }, {
- .gpios = (0 << 1) | (1 << 0),
- .axes = (int[]) {
- 1, /* 90 degrees */
- },
- }, {
- .gpios = (1 << 1) | (1 << 0),
- .axes = (int[]) {
- 2, /* 180 degrees */
- },
- }, {
- .gpios = (1 << 1) | (0 << 0),
- .axes = (int[]) {
- 3, /* 270 degrees */
- },
- },
- };
-
- static struct gpio_tilt_axis sg060_tilt_axes[] = {
- {
- .axis = ABS_RY,
- .min = 0,
- .max = 3,
- .fuzz = 0,
- .flat = 0,
- },
- };
-
- static struct gpio_tilt_platform_data sg060_tilt_pdata= {
- .gpios = sg060_tilt_gpios,
- .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
-
- .axes = sg060_tilt_axes,
- .nr_axes = ARRAY_SIZE(sg060_tilt_axes),
-
- .states = sg060_tilt_states,
- .nr_states = ARRAY_SIZE(sg060_tilt_states),
-
- .debounce_interval = 100,
-
- .poll_interval = 1000,
- .enable = sg060_tilt_enable,
- .disable = sg060_tilt_disable,
- };
-
- static struct platform_device sg060_device_tilt = {
- .name = "gpio-tilt-polled",
- .id = -1,
- .dev = {
- .platform_data = &sg060_tilt_pdata,
- },
- };
diff --git a/Documentation/input/devices/rotary-encoder.rst b/Documentation/input/devices/rotary-encoder.rst
index b07b20a295ac..810ae02bdaa0 100644
--- a/Documentation/input/devices/rotary-encoder.rst
+++ b/Documentation/input/devices/rotary-encoder.rst
@@ -108,9 +108,9 @@ example below:
};
static const struct property_entry rotary_encoder_properties[] __initconst = {
- PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
- PROPERTY_ENTRY_INTEGER("linux,axis", u32, ABS_X),
- PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis", u32, 0),
+ PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
+ PROPERTY_ENTRY_U32("linux,axis", ABS_X),
+ PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 0),
{ },
};
diff --git a/Documentation/input/ff.rst b/Documentation/input/ff.rst
index 26d461998e08..0c02e87ee86d 100644
--- a/Documentation/input/ff.rst
+++ b/Documentation/input/ff.rst
@@ -31,7 +31,7 @@ To enable force feedback, you have to:
Before you start, let me WARN you that some devices shake violently during the
initialisation phase. This happens for example with my "AVB Top Shot Pegasus".
-To stop this annoying behaviour, move you joystick to its limits. Anyway, you
+To stop this annoying behaviour, move your joystick to its limits. Anyway, you
should keep a hand on your device, in order to avoid it to break down if
something goes wrong.
@@ -121,7 +121,7 @@ uploaded, but not played.
The content of effect may be modified. In particular, its field "id" is set
to the unique id assigned by the driver. This data is required for performing
some operations (removing an effect, controlling the playback).
-This if field must be set to -1 by the user in order to tell the driver to
+The "id" field must be set to -1 by the user in order to tell the driver to
allocate a new effect.
Effects are file descriptor specific.
@@ -178,7 +178,7 @@ Control of playing is done with write(). Below is an example:
stop.code = effect.id;
stop.value = 0;
- write(fd, (const void*) &play, sizeof(stop));
+ write(fd, (const void*) &stop, sizeof(stop));
Setting the gain
----------------