summaryrefslogtreecommitdiff
path: root/Documentation/networking
diff options
context:
space:
mode:
authorIoana Ciornei <ioana.ciornei@nxp.com>2021-07-29 20:19:01 +0300
committerDavid S. Miller <davem@davemloft.net>2021-07-29 23:34:45 +0300
commitd1626a1c273d0e66834006b10ebe12062dce2b6f (patch)
treec57625872d27cc7bc2da91bfb189e2b35c81b638 /Documentation/networking
parent7a91f9078d4fb683f162112a32bd52b2d21fb5c9 (diff)
downloadlinux-d1626a1c273d0e66834006b10ebe12062dce2b6f.tar.xz
docs: networking: dpaa2: document mirroring support on the switch
Document the mirroring capabilities of the dpaa2-switch driver, any restrictions that are imposed and some example commands. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/networking')
-rw-r--r--Documentation/networking/device_drivers/ethernet/freescale/dpaa2/switch-driver.rst43
1 files changed, 43 insertions, 0 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/switch-driver.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/switch-driver.rst
index 863ca6bd8318..8bf411b857d4 100644
--- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/switch-driver.rst
+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/switch-driver.rst
@@ -172,3 +172,46 @@ Example 4: Use a single shared filter block on both eth5 and eth6::
action trap
$ tc filter add block 1 ingress protocol ipv4 flower src_ip 192.168.1.1 skip_sw \
action mirred egress redirect dev eth3
+
+Mirroring
+~~~~~~~~~
+
+The DPAA2 switch supports only per port mirroring and per VLAN mirroring.
+Adding mirroring filters in shared blocks is also supported.
+
+When using the tc-flower classifier with the 802.1q protocol, only the
+''vlan_id'' key will be accepted. Mirroring based on any other fields from the
+802.1q protocol will be rejected::
+
+ $ tc qdisc add dev eth8 ingress_block 1 clsact
+ $ tc filter add block 1 ingress protocol 802.1q flower skip_sw vlan_prio 3 action mirred egress mirror dev eth6
+ Error: fsl_dpaa2_switch: Only matching on VLAN ID supported.
+ We have an error talking to the kernel
+
+If a mirroring VLAN filter is requested on a port, the VLAN must to be
+installed on the switch port in question either using ''bridge'' or by creating
+a VLAN upper device if the switch port is used as a standalone interface::
+
+ $ tc qdisc add dev eth8 ingress_block 1 clsact
+ $ tc filter add block 1 ingress protocol 802.1q flower skip_sw vlan_id 200 action mirred egress mirror dev eth6
+ Error: VLAN must be installed on the switch port.
+ We have an error talking to the kernel
+
+ $ bridge vlan add vid 200 dev eth8
+ $ tc filter add block 1 ingress protocol 802.1q flower skip_sw vlan_id 200 action mirred egress mirror dev eth6
+
+ $ ip link add link eth8 name eth8.200 type vlan id 200
+ $ tc filter add block 1 ingress protocol 802.1q flower skip_sw vlan_id 200 action mirred egress mirror dev eth6
+
+Also, it should be noted that the mirrored traffic will be subject to the same
+egress restrictions as any other traffic. This means that when a mirrored
+packet will reach the mirror port, if the VLAN found in the packet is not
+installed on the port it will get dropped.
+
+The DPAA2 switch supports only a single mirroring destination, thus multiple
+mirror rules can be installed but their ''to'' port has to be the same::
+
+ $ tc filter add block 1 ingress protocol 802.1q flower skip_sw vlan_id 200 action mirred egress mirror dev eth6
+ $ tc filter add block 1 ingress protocol 802.1q flower skip_sw vlan_id 100 action mirred egress mirror dev eth7
+ Error: fsl_dpaa2_switch: Multiple mirror ports not supported.
+ We have an error talking to the kernel