summaryrefslogtreecommitdiff
path: root/Documentation/scsi
diff options
context:
space:
mode:
authorOndrej Zary <linux@rainbow-software.org>2016-09-27 22:00:25 +0300
committerMartin K. Petersen <martin.petersen@oracle.com>2016-09-30 04:52:43 +0300
commita8cfbcaec0c1214ddebf1b7a39aa0df545fbbf90 (patch)
tree5d67ae978e64858c3ab6221a65381a69c047aaaf /Documentation/scsi
parentd91f5afe595a3c4bdc1b755225024862c2e917f0 (diff)
downloadlinux-a8cfbcaec0c1214ddebf1b7a39aa0df545fbbf90.tar.xz
scsi: g_NCR5380: Stop using scsi_module.c
Convert g_NCR5380 to use scsi_add_host instead of scsi_module.c Use pnp_driver and isa_driver to manage cards. In order to support multiple cards, new module parameter format is introduced. The old parameters are kept for compatibility. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'Documentation/scsi')
-rw-r--r--Documentation/scsi/g_NCR5380.txt24
1 files changed, 21 insertions, 3 deletions
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
index 843cbae88ebb..e2c187947e58 100644
--- a/Documentation/scsi/g_NCR5380.txt
+++ b/Documentation/scsi/g_NCR5380.txt
@@ -28,6 +28,16 @@ time. More info to come in the future.
This driver works as a module.
When included as a module, parameters can be passed on the insmod/modprobe
command line:
+ irq=xx[,...] the interrupt(s)
+ base=xx[,...] the port or base address(es) (for port or memory mapped, resp.)
+ card=xx[,...] card type(s):
+ 0 = NCR5380,
+ 1 = NCR53C400,
+ 2 = NCR53C400A,
+ 3 = Domex Technology Corp 3181E (DTC3181E)
+ 4 = Hewlett Packard C2502
+
+These old-style parameters can support only one card:
ncr_irq=xx the interrupt
ncr_addr=xx the port or base address (for port or memory
mapped, resp.)
@@ -36,11 +46,19 @@ command line:
ncr_53c400a=1 to set up for a NCR53C400A board
dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
hp_c2502=1 to set up for a Hewlett Packard C2502 board
+
e.g.
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+OLD: modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+NEW: modprobe g_NCR5380 irq=5 base=0x350 card=0
for a port mapped NCR5380 board or
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
- for a memory mapped NCR53C400 board with interrupts disabled.
+
+OLD: modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+NEW: modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+ for a memory mapped NCR53C400 board with interrupts disabled or
+
+NEW: modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+ for two cards: DTC3181 (in non-PnP mode) at 0x240 with no IRQ
+ and HP C2502 at 0x300 with IRQ 7
(255 should be specified for no or DMA interrupt, 254 to autoprobe for an
IRQ line if overridden on the command line.)