summaryrefslogtreecommitdiff
path: root/Documentation/usb
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@s-opensource.com>2017-04-17 03:51:09 +0300
committerJonathan Corbet <corbet@lwn.net>2017-04-21 00:31:26 +0300
commit96801b35f07ec85ffd4bb542e4b0d5122d32fc9d (patch)
tree66eebe1a059eda8597e5ee41a519e2d5e2f8dc64 /Documentation/usb
parent9b06f754133c6b22c9753586c3c2708bc509ff64 (diff)
downloadlinux-96801b35f07ec85ffd4bb542e4b0d5122d32fc9d.tar.xz
usb.rst: move documentation from proc_usb_info.txt to USB ReST book
The contents of proc_usb_info.txt complements what's there at driver-api usb book. Yet, it is outdated, as it still refers to the USB character devices as usbfs. So, move the contents to usb.rst, adjusting it to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'Documentation/usb')
-rw-r--r--Documentation/usb/proc_usb_info.txt390
1 files changed, 0 insertions, 390 deletions
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
deleted file mode 100644
index 06d7960e9ae6..000000000000
--- a/Documentation/usb/proc_usb_info.txt
+++ /dev/null
@@ -1,390 +0,0 @@
-/proc/bus/usb filesystem output
-===============================
-(version 2010.09.13)
-
-
-The usbfs filesystem for USB devices is traditionally mounted at
-/proc/bus/usb. It provides the /sys/kernel/debug/usb/devices file, as well as
-the /proc/bus/usb/BBB/DDD files.
-
-In many modern systems the usbfs filesystem isn't used at all. Instead
-USB device nodes are created under /dev/usb/ or someplace similar. The
-"devices" file is available in debugfs, typically as
-/sys/kernel/debug/usb/devices.
-
-
-**NOTE**: If /proc/bus/usb appears empty, and a host controller
- driver has been linked, then you need to mount the
- filesystem. Issue the command (as root):
-
- mount -t usbfs none /proc/bus/usb
-
- An alternative and more permanent method would be to add
-
- none /proc/bus/usb usbfs defaults 0 0
-
- to /etc/fstab. This will mount usbfs at each reboot.
- You can then issue `cat /sys/kernel/debug/usb/devices` to extract
- USB device information, and user mode drivers can use usbfs
- to interact with USB devices.
-
- There are a number of mount options supported by usbfs.
- Consult the source code (linux/drivers/usb/core/inode.c) for
- information about those options.
-
-**NOTE**: The filesystem has been renamed from "usbdevfs" to
- "usbfs", to reduce confusion with "devfs". You may
- still see references to the older "usbdevfs" name.
-
-For more information on mounting the usbfs file system, see the
-"USB Device Filesystem" section of the USB Guide. The latest copy
-of the USB Guide can be found at http://www.linux-usb.org/
-
-
-THE /proc/bus/usb/BBB/DDD FILES:
---------------------------------
-Each connected USB device has one file. The BBB indicates the bus
-number. The DDD indicates the device address on that bus. Both
-of these numbers are assigned sequentially, and can be reused, so
-you can't rely on them for stable access to devices. For example,
-it's relatively common for devices to re-enumerate while they are
-still connected (perhaps someone jostled their power supply, hub,
-or USB cable), so a device might be 002/027 when you first connect
-it and 002/048 sometime later.
-
-These files can be read as binary data. The binary data consists
-of first the device descriptor, then the descriptors for each
-configuration of the device. Multi-byte fields in the device descriptor
-are converted to host endianness by the kernel. The configuration
-descriptors are in bus endian format! The configuration descriptor
-are wTotalLength bytes apart. If a device returns less configuration
-descriptor data than indicated by wTotalLength there will be a hole in
-the file for the missing bytes. This information is also shown
-in text form by the /sys/kernel/debug/usb/devices file, described later.
-
-These files may also be used to write user-level drivers for the USB
-devices. You would open the /proc/bus/usb/BBB/DDD file read/write,
-read its descriptors to make sure it's the device you expect, and then
-bind to an interface (or perhaps several) using an ioctl call. You
-would issue more ioctls to the device to communicate to it using
-control, bulk, or other kinds of USB transfers. The IOCTLs are
-listed in the <linux/usbdevice_fs.h> file, and at this writing the
-source code (linux/drivers/usb/core/devio.c) is the primary reference
-for how to access devices through those files.
-
-Note that since by default these BBB/DDD files are writable only by
-root, only root can write such user mode drivers. You can selectively
-grant read/write permissions to other users by using "chmod". Also,
-usbfs mount options such as "devmode=0666" may be helpful.
-
-
-
-THE /sys/kernel/debug/usb/devices FILE:
--------------------------------
-In /sys/kernel/debug/usb/devices, each device's output has multiple
-lines of ASCII output.
-I made it ASCII instead of binary on purpose, so that someone
-can obtain some useful data from it without the use of an
-auxiliary program. However, with an auxiliary program, the numbers
-in the first 4 columns of each "T:" line (topology info:
-Lev, Prnt, Port, Cnt) can be used to build a USB topology diagram.
-
-Each line is tagged with a one-character ID for that line:
-
-T = Topology (etc.)
-B = Bandwidth (applies only to USB host controllers, which are
- virtualized as root hubs)
-D = Device descriptor info.
-P = Product ID info. (from Device descriptor, but they won't fit
- together on one line)
-S = String descriptors.
-C = Configuration descriptor info. (* = active configuration)
-I = Interface descriptor info.
-E = Endpoint descriptor info.
-
-=======================================================================
-
-/sys/kernel/debug/usb/devices output format:
-
-Legend:
- d = decimal number (may have leading spaces or 0's)
- x = hexadecimal number (may have leading spaces or 0's)
- s = string
-
-
-Topology info:
-
-T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd
-| | | | | | | | |__MaxChildren
-| | | | | | | |__Device Speed in Mbps
-| | | | | | |__DeviceNumber
-| | | | | |__Count of devices at this level
-| | | | |__Connector/Port on Parent for this device
-| | | |__Parent DeviceNumber
-| | |__Level in topology for this bus
-| |__Bus number
-|__Topology info tag
-
- Speed may be:
- 1.5 Mbit/s for low speed USB
- 12 Mbit/s for full speed USB
- 480 Mbit/s for high speed USB (added for USB 2.0);
- also used for Wireless USB, which has no fixed speed
- 5000 Mbit/s for SuperSpeed USB (added for USB 3.0)
-
- For reasons lost in the mists of time, the Port number is always
- too low by 1. For example, a device plugged into port 4 will
- show up with "Port=03".
-
-Bandwidth info:
-B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd
-| | | |__Number of isochronous requests
-| | |__Number of interrupt requests
-| |__Total Bandwidth allocated to this bus
-|__Bandwidth info tag
-
- Bandwidth allocation is an approximation of how much of one frame
- (millisecond) is in use. It reflects only periodic transfers, which
- are the only transfers that reserve bandwidth. Control and bulk
- transfers use all other bandwidth, including reserved bandwidth that
- is not used for transfers (such as for short packets).
-
- The percentage is how much of the "reserved" bandwidth is scheduled by
- those transfers. For a low or full speed bus (loosely, "USB 1.1"),
- 90% of the bus bandwidth is reserved. For a high speed bus (loosely,
- "USB 2.0") 80% is reserved.
-
-
-Device descriptor info & Product ID info:
-
-D: Ver=x.xx Cls=xx(s) Sub=xx Prot=xx MxPS=dd #Cfgs=dd
-P: Vendor=xxxx ProdID=xxxx Rev=xx.xx
-
-where
-D: Ver=x.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd
-| | | | | | |__NumberConfigurations
-| | | | | |__MaxPacketSize of Default Endpoint
-| | | | |__DeviceProtocol
-| | | |__DeviceSubClass
-| | |__DeviceClass
-| |__Device USB version
-|__Device info tag #1
-
-where
-P: Vendor=xxxx ProdID=xxxx Rev=xx.xx
-| | | |__Product revision number
-| | |__Product ID code
-| |__Vendor ID code
-|__Device info tag #2
-
-
-String descriptor info:
-
-S: Manufacturer=ssss
-| |__Manufacturer of this device as read from the device.
-| For USB host controller drivers (virtual root hubs) this may
-| be omitted, or (for newer drivers) will identify the kernel
-| version and the driver which provides this hub emulation.
-|__String info tag
-
-S: Product=ssss
-| |__Product description of this device as read from the device.
-| For older USB host controller drivers (virtual root hubs) this
-| indicates the driver; for newer ones, it's a product (and vendor)
-| description that often comes from the kernel's PCI ID database.
-|__String info tag
-
-S: SerialNumber=ssss
-| |__Serial Number of this device as read from the device.
-| For USB host controller drivers (virtual root hubs) this is
-| some unique ID, normally a bus ID (address or slot name) that
-| can't be shared with any other device.
-|__String info tag
-
-
-
-Configuration descriptor info:
-
-C:* #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA
-| | | | | |__MaxPower in mA
-| | | | |__Attributes
-| | | |__ConfiguratioNumber
-| | |__NumberOfInterfaces
-| |__ "*" indicates the active configuration (others are " ")
-|__Config info tag
-
- USB devices may have multiple configurations, each of which act
- rather differently. For example, a bus-powered configuration
- might be much less capable than one that is self-powered. Only
- one device configuration can be active at a time; most devices
- have only one configuration.
-
- Each configuration consists of one or more interfaces. Each
- interface serves a distinct "function", which is typically bound
- to a different USB device driver. One common example is a USB
- speaker with an audio interface for playback, and a HID interface
- for use with software volume control.
-
-
-Interface descriptor info (can be multiple per Config):
-
-I:* If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss
-| | | | | | | | |__Driver name
-| | | | | | | | or "(none)"
-| | | | | | | |__InterfaceProtocol
-| | | | | | |__InterfaceSubClass
-| | | | | |__InterfaceClass
-| | | | |__NumberOfEndpoints
-| | | |__AlternateSettingNumber
-| | |__InterfaceNumber
-| |__ "*" indicates the active altsetting (others are " ")
-|__Interface info tag
-
- A given interface may have one or more "alternate" settings.
- For example, default settings may not use more than a small
- amount of periodic bandwidth. To use significant fractions
- of bus bandwidth, drivers must select a non-default altsetting.
-
- Only one setting for an interface may be active at a time, and
- only one driver may bind to an interface at a time. Most devices
- have only one alternate setting per interface.
-
-
-Endpoint descriptor info (can be multiple per Interface):
-
-E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=dddss
-| | | | |__Interval (max) between transfers
-| | | |__EndpointMaxPacketSize
-| | |__Attributes(EndpointType)
-| |__EndpointAddress(I=In,O=Out)
-|__Endpoint info tag
-
- The interval is nonzero for all periodic (interrupt or isochronous)
- endpoints. For high speed endpoints the transfer interval may be
- measured in microseconds rather than milliseconds.
-
- For high speed periodic endpoints, the "MaxPacketSize" reflects
- the per-microframe data transfer size. For "high bandwidth"
- endpoints, that can reflect two or three packets (for up to
- 3KBytes every 125 usec) per endpoint.
-
- With the Linux-USB stack, periodic bandwidth reservations use the
- transfer intervals and sizes provided by URBs, which can be less
- than those found in endpoint descriptor.
-
-
-=======================================================================
-
-
-If a user or script is interested only in Topology info, for
-example, use something like "grep ^T: /sys/kernel/debug/usb/devices"
-for only the Topology lines. A command like
-"grep -i ^[tdp]: /sys/kernel/debug/usb/devices" can be used to list
-only the lines that begin with the characters in square brackets,
-where the valid characters are TDPCIE. With a slightly more able
-script, it can display any selected lines (for example, only T, D,
-and P lines) and change their output format. (The "procusb"
-Perl script is the beginning of this idea. It will list only
-selected lines [selected from TBDPSCIE] or "All" lines from
-/sys/kernel/debug/usb/devices.)
-
-The Topology lines can be used to generate a graphic/pictorial
-of the USB devices on a system's root hub. (See more below
-on how to do this.)
-
-The Interface lines can be used to determine what driver is
-being used for each device, and which altsetting it activated.
-
-The Configuration lines could be used to list maximum power
-(in milliamps) that a system's USB devices are using.
-For example, "grep ^C: /sys/kernel/debug/usb/devices".
-
-
-Here's an example, from a system which has a UHCI root hub,
-an external hub connected to the root hub, and a mouse and
-a serial converter connected to the external hub.
-
-T: Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
-B: Alloc= 28/900 us ( 3%), #Int= 2, #Iso= 0
-D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
-P: Vendor=0000 ProdID=0000 Rev= 0.00
-S: Product=USB UHCI Root Hub
-S: SerialNumber=dce0
-C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
-I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
-E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
-
-T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
-D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
-P: Vendor=0451 ProdID=1446 Rev= 1.00
-C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
-I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
-E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
-
-T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
-D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
-P: Vendor=04b4 ProdID=0001 Rev= 0.00
-C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
-I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse
-E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms
-
-T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
-D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
-P: Vendor=0565 ProdID=0001 Rev= 1.08
-S: Manufacturer=Peracom Networks, Inc.
-S: Product=Peracom USB to Serial Converter
-C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
-I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=serial
-E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 16ms
-E: Ad=01(O) Atr=02(Bulk) MxPS= 16 Ivl= 16ms
-E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl= 8ms
-
-
-Selecting only the "T:" and "I:" lines from this (for example, by using
-"procusb ti"), we have:
-
-T: Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
-T: Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
-I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
-T: Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
-I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=mouse
-T: Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
-I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=serial
-
-
-Physically this looks like (or could be converted to):
-
- +------------------+
- | PC/root_hub (12)| Dev# = 1
- +------------------+ (nn) is Mbps.
- Level 0 | CN.0 | CN.1 | [CN = connector/port #]
- +------------------+
- /
- /
- +-----------------------+
- Level 1 | Dev#2: 4-port hub (12)|
- +-----------------------+
- |CN.0 |CN.1 |CN.2 |CN.3 |
- +-----------------------+
- \ \____________________
- \_____ \
- \ \
- +--------------------+ +--------------------+
- Level 2 | Dev# 3: mouse (1.5)| | Dev# 4: serial (12)|
- +--------------------+ +--------------------+
-
-
-
-Or, in a more tree-like structure (ports [Connectors] without
-connections could be omitted):
-
-PC: Dev# 1, root hub, 2 ports, 12 Mbps
-|_ CN.0: Dev# 2, hub, 4 ports, 12 Mbps
- |_ CN.0: Dev #3, mouse, 1.5 Mbps
- |_ CN.1:
- |_ CN.2: Dev #4, serial, 12 Mbps
- |_ CN.3:
-|_ CN.1:
-
-
- ### END ###