summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorGregory CLEMENT <gregory.clement@free-electrons.com>2017-10-02 17:58:52 +0300
committerUlf Hansson <ulf.hansson@linaro.org>2017-10-04 11:50:36 +0300
commitbb16ea1742c8f35a9349b7508dc45d3a922db5f5 (patch)
tree87416834df3b15a64f7d7a9d7d53878cac7602cb /Documentation
parent0a44697627d17a66d7dc98f17aeca07ca79c5c20 (diff)
downloadlinux-bb16ea1742c8f35a9349b7508dc45d3a922db5f5.tar.xz
mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Without this patch the kernel hand during boot if the mvpp2.2 network driver was not present in the kernel. Indeed the clock needed by the xenon controller was set by the network driver. Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality)" CC: Stable <stable@vger.kernel.org> Tested-by: Zhoujie Wu <zjwu@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt12
1 files changed, 7 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
index b878a1e305af..ed1456f5c94d 100644
--- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
@@ -16,11 +16,13 @@ Required Properties:
- clocks:
Array of clocks required for SDHC.
- Require at least input clock for Xenon IP core.
+ Require at least input clock for Xenon IP core. For Armada AP806 and
+ CP110, the AXI clock is also mandatory.
- clock-names:
Array of names corresponding to clocks property.
The input clock for Xenon IP core should be named as "core".
+ The input clock for the AXI bus must be named as "axi".
- reg:
* For "marvell,armada-3700-sdhci", two register areas.
@@ -106,8 +108,8 @@ Example:
compatible = "marvell,armada-ap806-sdhci";
reg = <0xaa0000 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
- clocks = <&emmc_clk>;
- clock-names = "core";
+ clocks = <&emmc_clk>,<&axi_clk>;
+ clock-names = "core", "axi";
bus-width = <4>;
marvell,xenon-phy-slow-mode;
marvell,xenon-tun-count = <11>;
@@ -126,8 +128,8 @@ Example:
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
vqmmc-supply = <&sd_vqmmc_regulator>;
vmmc-supply = <&sd_vmmc_regulator>;
- clocks = <&sdclk>;
- clock-names = "core";
+ clocks = <&sdclk>, <&axi_clk>;
+ clock-names = "core", "axi";
bus-width = <4>;
marvell,xenon-tun-count = <9>;
};