summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-07-05 21:42:45 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2021-07-05 21:42:45 +0300
commit1f89a590b26e34ec7c32fbafaed446e52c3d0c3f (patch)
treea24443af508526f88321077766409866a95e3333 /Documentation
parentda85e7ed6993144a9ca43a1106c7f898626390a3 (diff)
parent818b26588994d9d95743fca0a427f08ec6c1c41d (diff)
downloadlinux-1f89a590b26e34ec7c32fbafaed446e52c3d0c3f.tar.xz
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - a new driver for SparkFun Qwiic Joystick - pm8941-pwrkey driver now supports PMK8350 - a bunch of assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl Input: hideep - fix the uninitialized use in hideep_nvm_unlock() Input: trackpoint - use kobj_to_dev() Input: atkbd - use kobj_to_dev() Input: tsc200x-core - use kobj_to_dev() Input: ims-pcu - use kobj_to_dev() Input: cros_ec_keyb - use kobj_to_dev() API dt-bindings: input: touchscreen: st1232: Convert to json-schema Input: i8042 - fix typos in comments Input: add SparkFun Qwiic Joystick driver dt-bindings: Add vendor prefix and bindings for Qwiic Joystick Input: cy8ctmg110_ts - switch to using gpiod API Input: cy8ctmg110_ts - switch to using managed resources Input: cy8ctmg110_ts - use endian helpers when converting data on wire Input: cy8ctmg110_ts - let I2C core configure wake interrupt Input: cy8ctmg110_ts - do not hardcode as wakeup source Input: cy8ctmg110_ts - do not hard code interrupt trigger Input: cy8ctmg110_ts - rely on platform code to supply interrupt Input: resistive-adc-touch - fix uninitialized variable 'press' Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheral ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/input/fsl-mma8450.txt12
-rw-r--r--Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt2
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml148
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt93
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml1
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt33
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml86
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml50
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt28
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml6
-rw-r--r--Documentation/devicetree/bindings/trivial-devices.yaml2
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
12 files changed, 297 insertions, 166 deletions
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
deleted file mode 100644
index 0b96e5737d3a..000000000000
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* Freescale MMA8450 3-Axis Accelerometer
-
-Required properties:
-- compatible : "fsl,mma8450".
-- reg: the I2C address of MMA8450
-
-Example:
-
-accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
-};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
index 34ab5763f494..6cd08bca2c66 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -8,6 +8,8 @@ PROPERTIES
Definition: must be one of:
"qcom,pm8941-pwrkey"
"qcom,pm8941-resin"
+ "qcom,pmk8350-pwrkey"
+ "qcom,pmk8350-resin"
- reg:
Usage: required
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
new file mode 100644
index 000000000000..762e56ee90cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8CTMA340 series touchscreen controller bindings
+
+description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after
+ the marketing name Cypress TrueTouch Standard Product) touchscreens can
+ be connected to either I2C or SPI buses.
+
+maintainers:
+ - Javier Martinez Canillas <javier@dowhile0.org>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ $nodename:
+ pattern: "^touchscreen(@.*)?$"
+
+ compatible:
+ oneOf:
+ - const: cypress,cy8ctma340
+ - const: cypress,cy8ctst341
+ - const: cypress,cyttsp-spi
+ description: Legacy compatible for SPI connected CY8CTMA340
+ deprecated: true
+ - const: cypress,cyttsp-i2c
+ description: Legacy compatible for I2C connected CY8CTMA340
+ deprecated: true
+
+ reg:
+ description: I2C address when used on the I2C bus, or the SPI chip
+ select index when used on the SPI bus
+
+ clock-frequency:
+ description: I2C client clock frequency, defined for host when using
+ the device on the I2C bus
+ minimum: 0
+ maximum: 400000
+
+ spi-max-frequency:
+ description: SPI clock frequency, defined for host, defined when using
+ the device on the SPI bus. The throughput is maximum 2 Mbps so the
+ typical value is 2000000, if higher rates are used the total throughput
+ needs to be restricted to 2 Mbps.
+ minimum: 0
+ maximum: 6000000
+
+ interrupts:
+ description: Interrupt to host
+ maxItems: 1
+
+ vcpin-supply:
+ description: Analog power supply regulator on VCPIN pin
+
+ vdd-supply:
+ description: Digital power supply regulator on VDD pin
+
+ reset-gpios:
+ description: Reset line for the touchscreen, should be tagged
+ as GPIO_ACTIVE_LOW
+
+ bootloader-key:
+ description: the 8-byte bootloader key that is required to switch
+ the chip from bootloader mode (default mode) to application mode
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 8
+ maxItems: 8
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+
+ active-distance:
+ description: the distance in pixels beyond which a touch must move
+ before movement is detected and reported by the device
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ active-interval-ms:
+ description: the minimum period in ms between consecutive
+ scanning/processing cycles when the chip is in active mode
+ minimum: 0
+ maximum: 255
+
+ lowpower-interval-ms:
+ description: the minimum period in ms between consecutive
+ scanning/processing cycles when the chip is in low-power mode
+ minimum: 0
+ maximum: 2550
+
+ touch-timeout-ms:
+ description: minimum time in ms spent in the active power state while no
+ touches are detected before entering low-power mode
+ minimum: 0
+ maximum: 2550
+
+ use-handshake:
+ description: enable register-based handshake (boolean). This should only
+ be used if the chip is configured to use 'blocking communication with
+ timeout' (in this case the device generates an interrupt at the end of
+ every scanning/processing cycle)
+ $ref: /schemas/types.yaml#/definitions/flag
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - bootloader-key
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+ touchscreen@0 {
+ compatible = "cypress,cy8ctma340";
+ reg = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&ldo_aux1_reg>;
+ vcpin-supply = <&ldo_aux2_reg>;
+ bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ active-interval-ms = <0>;
+ touch-timeout-ms = <255>;
+ lowpower-interval-ms = <10>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
deleted file mode 100644
index 6ee274aa8b03..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Cypress cyttsp touchscreen controller
-
-Required properties:
- - compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
- - reg : Device I2C address or SPI chip select number
- - spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi)
- - interrupts : (gpio) interrupt to which the chip is connected
- (see interrupt binding[0]).
- - bootloader-key : the 8-byte bootloader key that is required to switch
- the chip from bootloader mode (default mode) to
- application mode.
- This property has to be specified as an array of 8
- '/bits/ 8' values.
-
-Optional properties:
- - reset-gpios : the reset gpio the chip is connected to
- (see GPIO binding[1] for more details).
- - touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y : vertical resolution of touchscreen (in pixels)
- - touchscreen-fuzz-x : horizontal noise value of the absolute input device
- (in pixels)
- - touchscreen-fuzz-y : vertical noise value of the absolute input device
- (in pixels)
- - active-distance : the distance in pixels beyond which a touch must move
- before movement is detected and reported by the device.
- Valid values: 0-15.
- - active-interval-ms : the minimum period in ms between consecutive
- scanning/processing cycles when the chip is in active mode.
- Valid values: 0-255.
- - lowpower-interval-ms : the minimum period in ms between consecutive
- scanning/processing cycles when the chip is in low-power mode.
- Valid values: 0-2550
- - touch-timeout-ms : minimum time in ms spent in the active power state while no
- touches are detected before entering low-power mode.
- Valid values: 0-2550
- - use-handshake : enable register-based handshake (boolean). This should
- only be used if the chip is configured to use 'blocking
- communication with timeout' (in this case the device
- generates an interrupt at the end of every
- scanning/processing cycle).
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
- &i2c1 {
- /* ... */
- cyttsp@a {
- compatible = "cypress,cyttsp-i2c";
- reg = <0xa>;
- interrupt-parent = <&gpio0>;
- interrupts = <28 0>;
- reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
-
- bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
- active-distance = <8>;
- active-interval-ms = <0>;
- lowpower-interval-ms = <200>;
- touch-timeout-ms = <100>;
- };
-
- /* ... */
- };
-
- &mcspi1 {
- /* ... */
- cyttsp@0 {
- compatible = "cypress,cyttsp-spi";
- spi-max-frequency = <6000000>;
- reg = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <28 0>;
- reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
-
- bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
- active-distance = <8>;
- active-interval-ms = <0>;
- lowpower-interval-ms = <200>;
- touch-timeout-ms = <100>;
- };
-
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index bfc3a8b5e118..2e8da7470513 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -56,6 +56,7 @@ properties:
wakeup-source: true
vcc-supply: true
+ iovcc-supply: true
gain:
description: Allows setting the sensitivity in the range from 0 to 31.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
deleted file mode 100644
index af5223bb5bdd..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Generic resistive touchscreen ADC
-
-Required properties:
-
- - compatible: must be "resistive-adc-touch"
-The device must be connected to an ADC device that provides channels for
-position measurement and optional pressure.
-Refer to
-https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
-for details
-
- - iio-channels: must have at least two channels connected to an ADC device.
-These should correspond to the channels exposed by the ADC device and should
-have the right index as the ADC device registers them. These channels
-represent the relative position on the "x" and "y" axes.
- - iio-channel-names: must have all the channels' names. Mandatory channels
-are "x" and "y".
-
-Optional properties:
- - iio-channels: The third channel named "pressure" is optional and can be
-used if the ADC device also measures pressure besides position.
-If this channel is missing, pressure will be ignored and the touchscreen
-will only report position.
- - iio-channel-names: optional channel named "pressure".
-
-Example:
-
- resistive_touch: resistive_touch {
- compatible = "resistive-adc-touch";
- touchscreen-min-pressure = <50000>;
- io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
- io-channel-names = "x", "y", "pressure";
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
new file mode 100644
index 000000000000..7fc22a403d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic resistive touchscreen ADC
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+ Generic ADC based resistive touchscreen controller
+ The device must be connected to an ADC device that provides channels for
+ position measurement and optional pressure.
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: resistive-adc-touch
+
+ io-channels:
+ minItems: 2
+ items:
+ - description: x
+ - description: y
+ - description: pressure (optional)
+ - description: z1 (optional)
+ - description: z2 (optional)
+
+ io-channel-names:
+ oneOf:
+ - items:
+ - enum: [x, y]
+ - enum: [x, y]
+ - items:
+ - enum: [x, y, pressure]
+ - enum: [x, y, pressure]
+ - enum: [x, y, pressure]
+ - items:
+ - enum: [x, y, z1, z2]
+ - enum: [x, y, z1, z2]
+ - enum: [x, y, z1, z2]
+ - enum: [x, y, z1, z2]
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-fuzz-x: true
+ touchscreen-fuzz-y: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-swapped-x-y: true
+ touchscreen-min-pressure: true
+ touchscreen-x-plate-ohms: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+
+examples:
+ - |
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc 24>, <&adc 25>;
+ io-channel-names = "y", "x";
+ };
+ - |
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ touchscreen-min-pressure = <50000>;
+ io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+ io-channel-names = "y", "pressure", "x";
+ };
+ - |
+ touchscreen {
+ compatible = "resistive-adc-touch";
+ touchscreen-min-pressure = <50000>;
+ io-channels = <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+ io-channel-names = "x", "z1", "z2", "y";
+ touchscreen-x-plate-ohms = <800>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
new file mode 100644
index 000000000000..1d8ca19fd37a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/sitronix,st1232.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix st1232 or st1633 touchscreen controller
+
+maintainers:
+ - Bastian Hecht <hechtb@gmail.com>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sitronix,st1232
+ - sitronix,st1633
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpios:
+ description: A phandle to the reset GPIO
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@55 {
+ compatible = "sitronix,st1232";
+ reg = <0x55>;
+ interrupts = <2 0>;
+ gpios = <&gpio1 166 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
deleted file mode 100644
index 019373253b28..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Sitronix st1232 or st1633 touchscreen controller
-
-Required properties:
-- compatible: must contain one of
- * "sitronix,st1232"
- * "sitronix,st1633"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-
-Optional properties:
-- gpios: a phandle to the reset GPIO
-
-For additional optional properties see: touchscreen.txt
-
-Example:
-
- i2c@00000000 {
- /* ... */
-
- touchscreen@55 {
- compatible = "sitronix,st1232";
- reg = <0x55>;
- interrupts = <2 0>;
- gpios = <&gpio1 166 0>;
- };
-
- /* ... */
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
index 046ace461cc9..4b5b212c772c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -74,6 +74,12 @@ properties:
touchscreen-y-mm:
description: vertical length in mm of the touchscreen
+ touchscreen-x-plate-ohms:
+ description: Resistance of the X-plate in Ohms
+
+ touchscreen-y-plate-ohms:
+ description: Resistance of the Y-plate in Ohms
+
dependencies:
touchscreen-size-x: [ touchscreen-size-y ]
touchscreen-size-y: [ touchscreen-size-x ]
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 37ac0a3ae3b4..a3edbd2bcd15 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -272,6 +272,8 @@ properties:
# Socionext SynQuacer TPM MMIO module
- socionext,synquacer-tpm-mmio
# i2c serial eeprom (24cxx)
+ - sparkfun,qwiic-joystick
+ # SparkFun Qwiic Joystick (COM-15168) with i2c interface
- st,24c256
# Ambient Light Sensor with SMBUS/Two Wire Serial Interface
- taos,tsl2550
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f25a1fbf8175..2bbc27aae977 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1080,6 +1080,8 @@ patternProperties:
description: Sony Corporation
"^spansion,.*":
description: Spansion Inc.
+ "^sparkfun,.*":
+ description: SparkFun Electronics
"^sprd,.*":
description: Spreadtrum Communications Inc.
"^sst,.*":