summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorGerhard Sittig <gsi@denx.de>2013-11-21 12:41:44 +0400
committerRob Herring <rob.herring@calxeda.com>2013-12-03 10:01:03 +0400
commit2c0e641a963d073d60cb63c24614c642b6f64b21 (patch)
tree9e4538c830a4a583c7c8ccee1f294d5c38c91b26 /Documentation
parent72d944ec7eeb195db96942d5a9f907a312e23313 (diff)
downloadlinux-2c0e641a963d073d60cb63c24614c642b6f64b21.tar.xz
dt: binding: reword PowerPC 8xxx GPIO documentation
re-format and re-word the device tree binding documentation for MPC8xxx and compatibles, reference the common document for interrupt controllers and remove outdated duplicate SoC specific information Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <Pawel.Moll@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <devicetree@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/gpio/8xxx_gpio.txt66
1 files changed, 40 insertions, 26 deletions
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
index b0019eb5330e..798cfc9d3839 100644
--- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller). See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
- 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
- services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+ for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+ "fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells: Should be two. The first cell is the pin number
+ and the second cell is used to specify optional
+ parameters (currently unused).
+- interrupt-parent: Phandle for the interrupt controller that
+ services interrupts for this device.
+- interrupts: Interrupt mapping for GPIO IRQ.
+- gpio-controller: Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller: Empty boolean property which marks the GPIO
+ module as an IRQ controller.
+- #interrupt-cells: Should be two. Defines the number of integer
+ cells required to specify an interrupt within
+ this interrupt controller. The first cell
+ defines the pin number, the second cell
+ defines additional flags (trigger type,
+ trigger polarity). Note that the available
+ set of trigger conditions supported by the
+ GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
- interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <74 0x8>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
- interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <75 0x8>;
gpio-controller;
};
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
- 2 = trigger on falling edge
- 3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
- interrupts = <4 3>;
interrupt-parent = <&gpio1>;
+ interrupts = <4 3>;
};