Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...

1 files changed, 41 insertions, 7 deletions

diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index b6f40743e07b..6a2f072c1d0a 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -117,7 +117,7 @@
 				mrvl,intc-nr-irqs = <2>;
 			};
 
-			usb_otg_phy0: usb-otg-phy@d4207000 {
+			usb_phy0: usb-phy@d4207000 {
 				compatible = "marvell,mmp2-usb-phy";
 				reg = <0xd4207000 0x40>;
 				#phy-cells = <0>;
@@ -130,7 +130,7 @@
 				interrupts = <44>;
 				clocks = <&soc_clocks MMP2_CLK_USB>;
 				clock-names = "USBCLK";
-				phys = <&usb_otg_phy0>;
+				phys = <&usb_phy0>;
 				phy-names = "usb";
 				status = "disabled";
 			};
@@ -170,6 +170,28 @@
 				interrupts = <54>;
 				status = "disabled";
 			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <42>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <30>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
 		};
 
 		apb@d4000000 {	/* APB */
@@ -192,6 +214,7 @@
 				interrupts = <27>;
 				clocks = <&soc_clocks MMP2_CLK_UART0>;
 				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -201,6 +224,7 @@
 				interrupts = <28>;
 				clocks = <&soc_clocks MMP2_CLK_UART1>;
 				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -210,6 +234,7 @@
 				interrupts = <24>;
 				clocks = <&soc_clocks MMP2_CLK_UART2>;
 				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -219,6 +244,7 @@
 				interrupts = <46>;
 				clocks = <&soc_clocks MMP2_CLK_UART3>;
 				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
 				status = "disabled";
 			};
 
@@ -346,40 +372,48 @@
 				status = "disabled";
 			};
 
-			ssp1: ssp@d4035000 {
+			ssp1: spi@d4035000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4035000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP0>;
 				interrupts = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			ssp2: ssp@d4036000 {
+			ssp2: spi@d4036000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4036000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP1>;
 				interrupts = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			ssp3: ssp@d4037000 {
+			ssp3: spi@d4037000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4037000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP2>;
 				interrupts = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			ssp4: ssp@d4039000 {
+			ssp4: spi@d4039000 {
 				compatible = "marvell,mmp2-ssp";
 				reg = <0xd4039000 0x1000>;
 				clocks = <&soc_clocks MMP2_CLK_SSP3>;
 				interrupts = <21>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,mmp2-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,