diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2021-10-20 16:49:36 +0300 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2021-10-20 16:49:38 +0300 |
| commit | 72cd4e3bde4e8ad178f9a698996275e20d235b63 (patch) | |
| tree | 250a0ff0c4276bbc1cdbadb296b1cf3f26b5ab18 /arch/arm64/boot | |
| parent | 519d81956ee277b4419c723adfb154603c2565ba (diff) | |
| parent | 0b28c41e3c951ea3d4f012cfa9da5ebd6512cf6e (diff) | |
| download | linux-72cd4e3bde4e8ad178f9a698996275e20d235b63.tar.xz | |
Merge tag 'imx-fixes-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.15, round 4:
- A series from Frieder Schrempf to fix i.MX8MM Kontron N801x board on
various aspects, voltage settings, GPIO polarity, SPI clock frequency
and Ethernet PHY type.
* tag 'imx-fixes-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct
Link: https://lore.kernel.org/r/20211018000958.GC25810@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64/boot')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 8 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 8 |
2 files changed, 10 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index d17abb515835..e99e7644ff39 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -70,7 +70,9 @@ regulator-name = "rst-usb-eth2"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; }; reg_vdd_5v: regulator-5v { @@ -95,7 +97,7 @@ clocks = <&osc_can>; interrupt-parent = <&gpio4>; interrupts = <28 IRQ_TYPE_EDGE_FALLING>; - spi-max-frequency = <100000>; + spi-max-frequency = <10000000>; vdd-supply = <®_vdd_3v3>; xceiver-supply = <®_vdd_5v>; }; @@ -111,7 +113,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-rxid"; phy-handle = <ðphy>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 9db9b90bf2bc..42bbbb3f532b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -91,10 +91,12 @@ reg_vdd_soc: BUCK1 { regulator-name = "buck1"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <850000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; }; reg_vdd_arm: BUCK2 { @@ -111,7 +113,7 @@ reg_vdd_dram: BUCK3 { regulator-name = "buck3"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; }; @@ -150,7 +152,7 @@ reg_vdd_snvs: LDO2 { regulator-name = "ldo2"; - regulator-min-microvolt = <850000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; |