summaryrefslogtreecommitdiff
path: root/arch/arm64
diff options
context:
space:
mode:
authoryankejian <yankejian@huawei.com>2016-01-13 10:09:58 +0300
committerDavid S. Miller <davem@davemloft.net>2016-01-15 22:40:03 +0300
commitb70ce2ab41cb67ab3d661eda078f7c4029bbca95 (patch)
treeea468282ce796291065bd35245c07a5c100104ea /arch/arm64
parent9207f9d45b0ad071baa128e846d7e7ed85016df3 (diff)
downloadlinux-b70ce2ab41cb67ab3d661eda078f7c4029bbca95.tar.xz
dts: hisi: fixes no syscon fault when init mdio
When linux start up, we get the log below: "Hi-HNS_MDIO 803c0000.mdio: no syscon hisilicon,peri-c-subctrl mdio_bus mdio@803c0000: mdio sys ctl reg has not maped" The source code about the subctrl is dealt syscon, but dts doesn't. It cause such fault, so this patch adds the syscon info on dts files to fixes it. Signed-off-by: Kejian Yan <yankejian@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm64')
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip05.dtsi5
-rw-r--r--arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi4
2 files changed, 7 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index 4ff16d016e34..c1ea999c7be1 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -246,6 +246,11 @@
clock-frequency = <200000000>;
};
+ peri_c_subctrl: syscon@80000000 {
+ compatible = "hisilicon,hip05-perisubc", "syscon";
+ reg = < 0x0 0x80000000 0x0 0x10000>;
+ };
+
uart0: uart@80300000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x80300000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
index 606dd5a05c2d..da7b6e613257 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@@ -10,8 +10,8 @@ soc0: soc@000000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "hisilicon,hns-mdio";
- reg = <0x0 0x803c0000 0x0 0x10000
- 0x0 0x80000000 0x0 0x10000>;
+ reg = <0x0 0x803c0000 0x0 0x10000>;
+ subctrl-vbase = <&peri_c_subctrl>;
soc0_phy0: ethernet-phy@0 {
reg = <0x0>;