summaryrefslogtreecommitdiff
path: root/arch/cris
diff options
context:
space:
mode:
authorJiri Kosina <jkosina@suse.cz>2011-11-13 23:55:35 +0400
committerJiri Kosina <jkosina@suse.cz>2011-11-13 23:55:53 +0400
commit2290c0d06d82faee87b1ab2d9d4f7bf81ef64379 (patch)
treee075e4d5534193f28e6059904f61e5ca03958d3c /arch/cris
parent4da669a2e3e5bc70b30a0465f3641528681b5f77 (diff)
parent52e4c2a05256cb83cda12f3c2137ab1533344edb (diff)
downloadlinux-2290c0d06d82faee87b1ab2d9d4f7bf81ef64379.tar.xz
Merge branch 'master' into for-next
Sync with Linus tree to have 157550ff ("mtd: add GPMI-NAND driver in the config and Makefile") as I have patch depending on that one.
Diffstat (limited to 'arch/cris')
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig1
-rw-r--r--arch/cris/arch-v10/kernel/kgdb.c6
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig1
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/nandflash.c2
-rw-r--r--arch/cris/arch-v32/drivers/mach-fs/nandflash.c2
-rw-r--r--arch/cris/arch-v32/kernel/kgdb.c14
6 files changed, 14 insertions, 12 deletions
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 0d7221779923..32d90867a984 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V10
select NET_ETHERNET
+ select NET_CORE
select MII
help
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index b9f9c8ce2169..b579dd02e098 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -694,7 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
/* Valid mem address. */
for (i = 0; i < count; i++) {
ch = *mem++;
- buf = pack_hex_byte(buf, ch);
+ buf = hex_byte_pack(buf, ch);
}
}
@@ -868,7 +868,7 @@ stub_is_stopped(int sigval)
/* Send trap type (converted to signal) */
*ptr++ = 'T';
- ptr = pack_hex_byte(ptr, sigval);
+ ptr = hex_byte_pack(ptr, sigval);
/* Send register contents. We probably only need to send the
* PC, frame pointer and stack pointer here. Other registers will be
@@ -881,7 +881,7 @@ stub_is_stopped(int sigval)
status = read_register (regno, &reg_cont);
if (status == SUCCESS) {
- ptr = pack_hex_byte(ptr, regno);
+ ptr = hex_byte_pack(ptr, regno);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 41a2732e8b9c..e47e9c3401b0 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
bool "Ethernet support"
depends on ETRAX_ARCH_V32
select NET_ETHERNET
+ select NET_CORE
select MII
help
This option enables the ETRAX FS built-in 10/100Mbit Ethernet
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index f58f2c1c5295..7fb52128ddc9 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index d5b0cc9f976b..e03238454b0e 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
this->ecc.mode = NAND_ECC_SOFT;
/* Enable the following for a flash based bad block table */
- /* this->options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */
/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index c0343c3ea7f8..8c1d35cdf00a 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -677,7 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
/* Valid mem address. */
for (i = 0; i < count; i++) {
ch = *mem++;
- buf = pack_hex_byte(buf, ch);
+ buf = hex_byte_pack(buf, ch);
}
}
/* Terminate properly. */
@@ -695,7 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
mem += count - 1;
for (i = 0; i < count; i++) {
ch = *mem--;
- buf = pack_hex_byte(buf, ch);
+ buf = hex_byte_pack(buf, ch);
}
/* Terminate properly. */
@@ -880,7 +880,7 @@ stub_is_stopped(int sigval)
/* Send trap type (converted to signal) */
*ptr++ = 'T';
- ptr = pack_hex_byte(ptr, sigval);
+ ptr = hex_byte_pack(ptr, sigval);
if (((reg.exs & 0xff00) >> 8) == 0xc) {
@@ -988,26 +988,26 @@ stub_is_stopped(int sigval)
}
/* Only send PC, frame and stack pointer. */
read_register(PC, &reg_cont);
- ptr = pack_hex_byte(ptr, PC);
+ ptr = hex_byte_pack(ptr, PC);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
*ptr++ = ';';
read_register(R8, &reg_cont);
- ptr = pack_hex_byte(ptr, R8);
+ ptr = hex_byte_pack(ptr, R8);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
*ptr++ = ';';
read_register(SP, &reg_cont);
- ptr = pack_hex_byte(ptr, SP);
+ ptr = hex_byte_pack(ptr, SP);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
*ptr++ = ';';
/* Send ERP as well; this will save us an entire register fetch in some cases. */
read_register(ERP, &reg_cont);
- ptr = pack_hex_byte(ptr, ERP);
+ ptr = hex_byte_pack(ptr, ERP);
*ptr++ = ':';
ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
*ptr++ = ';';