summaryrefslogtreecommitdiff
path: root/arch/mips/generic
diff options
context:
space:
mode:
authorPaul Burton <paul.burton@imgtec.com>2016-10-05 20:18:21 +0300
committerRalf Baechle <ralf@linux-mips.org>2016-10-06 19:04:20 +0300
commit3f5f0a4475e13345326061f00c68f428232ba2bc (patch)
tree0ad2657c668b23aafab4692d83c7156e55ca138f /arch/mips/generic
parenteed0eabd12ef061821cbfa20d903476e07645320 (diff)
downloadlinux-3f5f0a4475e13345326061f00c68f428232ba2bc.tar.xz
MIPS: generic: Convert SEAD-3 to a generic board
Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/generic')
-rw-r--r--arch/mips/generic/Kconfig7
-rw-r--r--arch/mips/generic/Makefile2
-rw-r--r--arch/mips/generic/board-sead3.c376
3 files changed, 385 insertions, 0 deletions
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index baddb0646b23..a606b3f9196c 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -9,4 +9,11 @@ config LEGACY_BOARDS
kernel is booted without being provided with an FDT via the UHI
boot protocol.
+config LEGACY_BOARD_SEAD3
+ bool "Support MIPS SEAD-3 boards"
+ select LEGACY_BOARDS
+ help
+ Enable this to include support for booting on MIPS SEAD-3 FPGA-based
+ development boards, which boot using a legacy boot protocol.
+
endif
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
index 26e64207f7ad..7c66494151db 100644
--- a/arch/mips/generic/Makefile
+++ b/arch/mips/generic/Makefile
@@ -11,3 +11,5 @@
obj-y += init.o
obj-y += irq.o
obj-y += proc.o
+
+obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
diff --git a/arch/mips/generic/board-sead3.c b/arch/mips/generic/board-sead3.c
new file mode 100644
index 000000000000..f4ae0584a33b
--- /dev/null
+++ b/arch/mips/generic/board-sead3.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "sead3: " fmt
+
+#include <linux/errno.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+
+#include <asm/fw/fw.h>
+#include <asm/io.h>
+#include <asm/machine.h>
+
+#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
+#define SEAD_CONFIG_GIC_PRESENT BIT(1)
+
+#define MIPS_REVISION CKSEG1ADDR(0x1fc00010)
+#define MIPS_REVISION_MACHINE (0xf << 4)
+#define MIPS_REVISION_MACHINE_SEAD3 (0x4 << 4)
+
+static __init bool sead3_detect(void)
+{
+ uint32_t rev;
+
+ rev = __raw_readl((void *)MIPS_REVISION);
+ return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
+}
+
+static __init int append_cmdline(void *fdt)
+{
+ int err, chosen_off;
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+ if (err) {
+ pr_err("Unable to set bootargs property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int append_memory(void *fdt)
+{
+ unsigned long phys_memsize, memsize;
+ __be32 mem_array[2];
+ int err, mem_off;
+ char *var;
+
+ /* find memory size from the bootloader environment */
+ var = fw_getenv("memsize");
+ if (var) {
+ err = kstrtoul(var, 0, &phys_memsize);
+ if (err) {
+ pr_err("Failed to read memsize env variable '%s'\n",
+ var);
+ return -EINVAL;
+ }
+ } else {
+ pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+ phys_memsize = 32 << 20;
+ }
+
+ /* default to using all available RAM */
+ memsize = phys_memsize;
+
+ /* allow the user to override the usable memory */
+ var = strstr(arcs_cmdline, "memsize=");
+ if (var)
+ memsize = memparse(var + strlen("memsize="), NULL);
+
+ /* if the user says there's more RAM than we thought, believe them */
+ phys_memsize = max_t(unsigned long, phys_memsize, memsize);
+
+ /* find or add a memory node */
+ mem_off = fdt_path_offset(fdt, "/memory");
+ if (mem_off == -FDT_ERR_NOTFOUND)
+ mem_off = fdt_add_subnode(fdt, 0, "memory");
+ if (mem_off < 0) {
+ pr_err("Unable to find or add memory DT node: %d\n", mem_off);
+ return mem_off;
+ }
+
+ err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+ if (err) {
+ pr_err("Unable to set memory node device_type: %d\n", err);
+ return err;
+ }
+
+ mem_array[0] = 0;
+ mem_array[1] = cpu_to_be32(phys_memsize);
+ err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
+ if (err) {
+ pr_err("Unable to set memory regs property: %d\n", err);
+ return err;
+ }
+
+ mem_array[0] = 0;
+ mem_array[1] = cpu_to_be32(memsize);
+ err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
+ mem_array, sizeof(mem_array));
+ if (err) {
+ pr_err("Unable to set linux,usable-memory property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int remove_gic(void *fdt)
+{
+ const unsigned int cpu_ehci_int = 2;
+ const unsigned int cpu_uart_int = 4;
+ const unsigned int cpu_eth_int = 6;
+ int gic_off, cpu_off, uart_off, eth_off, ehci_off, err;
+ uint32_t cfg, cpu_phandle;
+
+ /* leave the GIC node intact if a GIC is present */
+ cfg = __raw_readl((uint32_t *)SEAD_CONFIG);
+ if (cfg & SEAD_CONFIG_GIC_PRESENT)
+ return 0;
+
+ gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
+ if (gic_off < 0) {
+ pr_err("unable to find DT GIC node: %d\n", gic_off);
+ return gic_off;
+ }
+
+ err = fdt_nop_node(fdt, gic_off);
+ if (err) {
+ pr_err("unable to nop GIC node\n");
+ return err;
+ }
+
+ cpu_off = fdt_node_offset_by_compatible(fdt, -1,
+ "mti,cpu-interrupt-controller");
+ if (cpu_off < 0) {
+ pr_err("unable to find CPU intc node: %d\n", cpu_off);
+ return cpu_off;
+ }
+
+ cpu_phandle = fdt_get_phandle(fdt, cpu_off);
+ if (!cpu_phandle) {
+ pr_err("unable to get CPU intc phandle\n");
+ return -EINVAL;
+ }
+
+ err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
+ if (err) {
+ pr_err("unable to set root interrupt-parent: %d\n", err);
+ return err;
+ }
+
+ uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a");
+ while (uart_off >= 0) {
+ err = fdt_setprop_u32(fdt, uart_off, "interrupts",
+ cpu_uart_int);
+ if (err) {
+ pr_err("unable to set UART interrupts property: %d\n",
+ err);
+ return err;
+ }
+
+ uart_off = fdt_node_offset_by_compatible(fdt, uart_off,
+ "ns16550a");
+ }
+ if (uart_off != -FDT_ERR_NOTFOUND) {
+ pr_err("error searching for UART DT node: %d\n", uart_off);
+ return uart_off;
+ }
+
+ eth_off = fdt_node_offset_by_compatible(fdt, -1, "smsc,lan9115");
+ if (eth_off < 0) {
+ pr_err("unable to find ethernet DT node: %d\n", eth_off);
+ return eth_off;
+ }
+
+ err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int);
+ if (err) {
+ pr_err("unable to set ethernet interrupts property: %d\n", err);
+ return err;
+ }
+
+ ehci_off = fdt_node_offset_by_compatible(fdt, -1, "generic-ehci");
+ if (ehci_off < 0) {
+ pr_err("unable to find EHCI DT node: %d\n", ehci_off);
+ return ehci_off;
+ }
+
+ err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
+ if (err) {
+ pr_err("unable to set EHCI interrupts property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init int serial_config(void *fdt)
+{
+ const char *yamontty, *mode_var;
+ char mode_var_name[9], path[18], parity;
+ unsigned int uart, baud, stop_bits;
+ bool hw_flow;
+ int chosen_off, err;
+
+ yamontty = fw_getenv("yamontty");
+ if (!yamontty || !strcmp(yamontty, "tty0")) {
+ uart = 0;
+ } else if (!strcmp(yamontty, "tty1")) {
+ uart = 1;
+ } else {
+ pr_warn("yamontty environment variable '%s' invalid\n",
+ yamontty);
+ uart = 0;
+ }
+
+ baud = stop_bits = 0;
+ parity = 0;
+ hw_flow = false;
+
+ snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
+ mode_var = fw_getenv(mode_var_name);
+ if (mode_var) {
+ while (mode_var[0] >= '0' && mode_var[0] <= '9') {
+ baud *= 10;
+ baud += mode_var[0] - '0';
+ mode_var++;
+ }
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ parity = mode_var[0];
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ stop_bits = mode_var[0] - '0';
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (!strcmp(mode_var, "hw"))
+ hw_flow = true;
+ }
+
+ if (!baud)
+ baud = 38400;
+
+ if (parity != 'e' && parity != 'n' && parity != 'o')
+ parity = 'n';
+
+ if (stop_bits != 7 && stop_bits != 8)
+ stop_bits = 8;
+
+ WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
+ uart, baud, parity, stop_bits,
+ hw_flow ? "r" : "") >= sizeof(path));
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
+ if (err) {
+ pr_err("Unable to set stdout-path property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static __init const void *sead3_fixup_fdt(const void *fdt,
+ const void *match_data)
+{
+ static unsigned char fdt_buf[16 << 10] __initdata;
+ int err;
+
+ if (fdt_check_header(fdt))
+ panic("Corrupt DT");
+
+ /* if this isn't SEAD3, something went wrong */
+ BUG_ON(fdt_node_check_compatible(fdt, 0, "mti,sead-3"));
+
+ fw_init_cmdline();
+
+ err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+ if (err)
+ panic("Unable to open FDT: %d", err);
+
+ err = append_cmdline(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = append_memory(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = remove_gic(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = serial_config(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = fdt_pack(fdt_buf);
+ if (err)
+ panic("Unable to pack FDT: %d\n", err);
+
+ return fdt_buf;
+}
+
+static __init unsigned int sead3_measure_hpt_freq(void)
+{
+ void __iomem *status_reg = (void __iomem *)0xbf000410;
+ unsigned int freq, orig, tick = 0;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ orig = readl(status_reg) & 0x2; /* get original sample */
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+
+ write_c0_count(0);
+
+ /* wait 1 second (the sampling clock transitions every 10ms) */
+ while (tick < 100) {
+ /* wait for transition */
+ while ((readl(status_reg) & 0x2) == orig)
+ ;
+ orig = orig ^ 0x2; /* flip the bit */
+ tick++;
+ }
+
+ freq = read_c0_count();
+
+ local_irq_restore(flags);
+
+ return freq;
+}
+
+extern char __dtb_sead3_begin[];
+
+MIPS_MACHINE(sead3) = {
+ .fdt = __dtb_sead3_begin,
+ .detect = sead3_detect,
+ .fixup_fdt = sead3_fixup_fdt,
+ .measure_hpt_freq = sead3_measure_hpt_freq,
+};