Merge tag 'asoc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v5.4

Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on.  We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.

 - Lots and lots of cleanups from Morimoto-san and Yue Haibing.
 - Lots of cleanups and enhancements to the Freescale, sunxi dnd
   Intel rivers.
 - Initial Sound Open Firmware suppot for i.MX8.
 - Removal of w90x900 and nuc900 drivers as the platforms are
   being removed.
 - New support for Cirrus Logic CS47L15 and CS47L92, Freescale
   i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334

1 files changed, 27 insertions, 2 deletions

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 8b33128dccee..0875470a7806 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -99,6 +99,27 @@ static int qca_send_reset(struct hci_dev *hdev)
 	return 0;
 }
 
+int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int err;
+
+	bt_dev_dbg(hdev, "QCA pre shutdown cmd");
+
+	skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
+				NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
+
 static void qca_tlv_check_data(struct rome_config *config,
 				const struct firmware *fw)
 {
@@ -119,6 +140,7 @@ static void qca_tlv_check_data(struct rome_config *config,
 	BT_DBG("Length\t\t : %d bytes", length);
 
 	config->dnld_mode = ROME_SKIP_EVT_NONE;
+	config->dnld_type = ROME_SKIP_EVT_NONE;
 
 	switch (config->type) {
 	case TLV_TYPE_PATCH:
@@ -268,7 +290,7 @@ static int qca_inject_cmd_complete_event(struct hci_dev *hdev)
 
 	evt = skb_put(skb, sizeof(*evt));
 	evt->ncmd = 1;
-	evt->opcode = QCA_HCI_CC_OPCODE;
+	evt->opcode = cpu_to_le16(QCA_HCI_CC_OPCODE);
 
 	skb_put_u8(skb, QCA_HCI_CC_SUCCESS);
 
@@ -323,7 +345,7 @@ static int qca_download_firmware(struct hci_dev *hdev,
 	 */
 	if (config->dnld_type == ROME_SKIP_EVT_VSE_CC ||
 	    config->dnld_type == ROME_SKIP_EVT_VSE)
-		return qca_inject_cmd_complete_event(hdev);
+		ret = qca_inject_cmd_complete_event(hdev);
 
 out:
 	release_firmware(fw);
@@ -388,6 +410,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		return err;
 	}
 
+	/* Give the controller some time to get ready to receive the NVM */
+	msleep(10);
+
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
 	if (firmware_name)