summaryrefslogtreecommitdiff
path: root/drivers/char/amiserial.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/amiserial.c
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/char/amiserial.c')
-rw-r--r--drivers/char/amiserial.c2179
1 files changed, 2179 insertions, 0 deletions
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
new file mode 100644
index 000000000000..1dc4259213a6
--- /dev/null
+++ b/drivers/char/amiserial.c
@@ -0,0 +1,2179 @@
+/*
+ * linux/drivers/char/amiserial.c
+ *
+ * Serial driver for the amiga builtin port.
+ *
+ * This code was created by taking serial.c version 4.30 from kernel
+ * release 2.3.22, replacing all hardware related stuff with the
+ * corresponding amiga hardware actions, and removing all irrelevant
+ * code. As a consequence, it uses many of the constants and names
+ * associated with the registers and bits of 16550 compatible UARTS -
+ * but only to keep track of status, etc in the state variables. It
+ * was done this was to make it easier to keep the code in line with
+ * (non hardware specific) changes to serial.c.
+ *
+ * The port is registered with the tty driver as minor device 64, and
+ * therefore other ports should should only use 65 upwards.
+ *
+ * Richard Lucock 28/12/99
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
+ * 1998, 1999 Theodore Ts'o
+ *
+ */
+
+/*
+ * Serial driver configuration section. Here are the various options:
+ *
+ * SERIAL_PARANOIA_CHECK
+ * Check the magic number for the async_structure where
+ * ever possible.
+ */
+
+#include <linux/config.h>
+#include <linux/delay.h>
+
+#undef SERIAL_PARANOIA_CHECK
+#define SERIAL_DO_RESTART
+
+/* Set of debugging defines */
+
+#undef SERIAL_DEBUG_INTR
+#undef SERIAL_DEBUG_OPEN
+#undef SERIAL_DEBUG_FLOW
+#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+
+/* Sanity checks */
+
+#define SERIAL_INLINE
+
+#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
+#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
+ tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s)
+#else
+#define DBG_CNT(s)
+#endif
+
+/*
+ * End of serial driver configuration section.
+ */
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+static char *serial_version = "4.30";
+
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/console.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/setup.h>
+
+#include <asm/system.h>
+
+#include <asm/irq.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#endif
+
+static char *serial_name = "Amiga-builtin serial driver";
+
+static struct tty_driver *serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+static struct async_struct *IRQ_ports;
+
+static unsigned char current_ctl_bits;
+
+static void change_speed(struct async_struct *info, struct termios *old);
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
+
+
+static struct serial_state rs_table[1];
+
+#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
+
+/*
+ * tmp_buf is used as a temporary buffer by serial_write. We need to
+ * lock it in case the copy_from_user blocks while swapping in a page,
+ * and some other program tries to do a serial write at the same time.
+ * Since the lock will only come under contention when the system is
+ * swapping and available memory is low, it makes sense to share one
+ * buffer across all the serial ports, since it significantly saves
+ * memory if large numbers of serial ports are open.
+ */
+static unsigned char *tmp_buf;
+static DECLARE_MUTEX(tmp_buf_sem);
+
+#include <asm/uaccess.h>
+
+#define serial_isroot() (capable(CAP_SYS_ADMIN))
+
+
+static inline int serial_paranoia_check(struct async_struct *info,
+ char *name, const char *routine)
+{
+#ifdef SERIAL_PARANOIA_CHECK
+ static const char *badmagic =
+ "Warning: bad magic number for serial struct (%s) in %s\n";
+ static const char *badinfo =
+ "Warning: null async_struct for (%s) in %s\n";
+
+ if (!info) {
+ printk(badinfo, name, routine);
+ return 1;
+ }
+ if (info->magic != SERIAL_MAGIC) {
+ printk(badmagic, name, routine);
+ return 1;
+ }
+#endif
+ return 0;
+}
+
+/* some serial hardware definitions */
+#define SDR_OVRUN (1<<15)
+#define SDR_RBF (1<<14)
+#define SDR_TBE (1<<13)
+#define SDR_TSRE (1<<12)
+
+#define SERPER_PARENB (1<<15)
+
+#define AC_SETCLR (1<<15)
+#define AC_UARTBRK (1<<11)
+
+#define SER_DTR (1<<7)
+#define SER_RTS (1<<6)
+#define SER_DCD (1<<5)
+#define SER_CTS (1<<4)
+#define SER_DSR (1<<3)
+
+static __inline__ void rtsdtr_ctrl(int bits)
+{
+ ciab.pra = ((bits & (SER_RTS | SER_DTR)) ^ (SER_RTS | SER_DTR)) | (ciab.pra & ~(SER_RTS | SER_DTR));
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rs_stop(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_stop"))
+ return;
+
+ local_irq_save(flags);
+ if (info->IER & UART_IER_THRI) {
+ info->IER &= ~UART_IER_THRI;
+ /* disable Tx interrupt and remove any pending interrupts */
+ custom.intena = IF_TBE;
+ mb();
+ custom.intreq = IF_TBE;
+ mb();
+ }
+ local_irq_restore(flags);
+}
+
+static void rs_start(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_start"))
+ return;
+
+ local_irq_save(flags);
+ if (info->xmit.head != info->xmit.tail
+ && info->xmit.buf
+ && !(info->IER & UART_IER_THRI)) {
+ info->IER |= UART_IER_THRI;
+ custom.intena = IF_SETCLR | IF_TBE;
+ mb();
+ /* set a pending Tx Interrupt, transmitter should restart now */
+ custom.intreq = IF_SETCLR | IF_TBE;
+ mb();
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * ----------------------------------------------------------------------
+ *
+ * Here starts the interrupt handling routines. All of the following
+ * subroutines are declared as inline and are folded into
+ * rs_interrupt(). They were separated out for readability's sake.
+ *
+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off. People who may want to modify
+ * rs_interrupt() should try to keep the interrupt handler as fast as
+ * possible. After you are done making modifications, it is not a bad
+ * idea to do:
+ *
+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
+ *
+ * and look at the resulting assemble code in serial.s.
+ *
+ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
+ * -----------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver.
+ */
+static _INLINE_ void rs_sched_event(struct async_struct *info,
+ int event)
+{
+ info->event |= 1 << event;
+ tasklet_schedule(&info->tlet);
+}
+
+static _INLINE_ void receive_chars(struct async_struct *info)
+{
+ int status;
+ int serdatr;
+ struct tty_struct *tty = info->tty;
+ unsigned char ch;
+ struct async_icount *icount;
+
+ icount = &info->state->icount;
+
+ status = UART_LSR_DR; /* We obviously have a character! */
+ serdatr = custom.serdatr;
+ mb();
+ custom.intreq = IF_RBF;
+ mb();
+
+ if((serdatr & 0x1ff) == 0)
+ status |= UART_LSR_BI;
+ if(serdatr & SDR_OVRUN)
+ status |= UART_LSR_OE;
+
+ ch = serdatr & 0xff;
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto ignore_char;
+ *tty->flip.char_buf_ptr = ch;
+ icount->rx++;
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("DR%02x:%02x...", ch, status);
+#endif
+ *tty->flip.flag_buf_ptr = 0;
+
+ /*
+ * We don't handle parity or frame errors - but I have left
+ * the code in, since I'm not sure that the errors can't be
+ * detected.
+ */
+
+ if (status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE)) {
+ /*
+ * For statistics only
+ */
+ if (status & UART_LSR_BI) {
+ status &= ~(UART_LSR_FE | UART_LSR_PE);
+ icount->brk++;
+ } else if (status & UART_LSR_PE)
+ icount->parity++;
+ else if (status & UART_LSR_FE)
+ icount->frame++;
+ if (status & UART_LSR_OE)
+ icount->overrun++;
+
+ /*
+ * Now check to see if character should be
+ * ignored, and mask off conditions which
+ * should be ignored.
+ */
+ if (status & info->ignore_status_mask)
+ goto ignore_char;
+
+ status &= info->read_status_mask;
+
+ if (status & (UART_LSR_BI)) {
+#ifdef SERIAL_DEBUG_INTR
+ printk("handling break....");
+#endif
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ if (info->flags & ASYNC_SAK)
+ do_SAK(tty);
+ } else if (status & UART_LSR_PE)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (status & UART_LSR_FE)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ if (status & UART_LSR_OE) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+ tty->flip.count++;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ }
+ }
+ }
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ ignore_char:
+
+ tty_flip_buffer_push(tty);
+}
+
+static _INLINE_ void transmit_chars(struct async_struct *info)
+{
+ custom.intreq = IF_TBE;
+ mb();
+ if (info->x_char) {
+ custom.serdat = info->x_char | 0x100;
+ mb();
+ info->state->icount.tx++;
+ info->x_char = 0;
+ return;
+ }
+ if (info->xmit.head == info->xmit.tail
+ || info->tty->stopped
+ || info->tty->hw_stopped) {
+ info->IER &= ~UART_IER_THRI;
+ custom.intena = IF_TBE;
+ mb();
+ return;
+ }
+
+ custom.serdat = info->xmit.buf[info->xmit.tail++] | 0x100;
+ mb();
+ info->xmit.tail = info->xmit.tail & (SERIAL_XMIT_SIZE-1);
+ info->state->icount.tx++;
+
+ if (CIRC_CNT(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("THRE...");
+#endif
+ if (info->xmit.head == info->xmit.tail) {
+ custom.intena = IF_TBE;
+ mb();
+ info->IER &= ~UART_IER_THRI;
+ }
+}
+
+static _INLINE_ void check_modem_status(struct async_struct *info)
+{
+ unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR);
+ unsigned char dstatus;
+ struct async_icount *icount;
+
+ /* Determine bits that have changed */
+ dstatus = status ^ current_ctl_bits;
+ current_ctl_bits = status;
+
+ if (dstatus) {
+ icount = &info->state->icount;
+ /* update input line counters */
+ if (dstatus & SER_DSR)
+ icount->dsr++;
+ if (dstatus & SER_DCD) {
+ icount->dcd++;
+#ifdef CONFIG_HARD_PPS
+ if ((info->flags & ASYNC_HARDPPS_CD) &&
+ !(status & SER_DCD))
+ hardpps();
+#endif
+ }
+ if (dstatus & SER_CTS)
+ icount->cts++;
+ wake_up_interruptible(&info->delta_msr_wait);
+ }
+
+ if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
+#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
+ printk("ttyS%d CD now %s...", info->line,
+ (!(status & SER_DCD)) ? "on" : "off");
+#endif
+ if (!(status & SER_DCD))
+ wake_up_interruptible(&info->open_wait);
+ else {
+#ifdef SERIAL_DEBUG_OPEN
+ printk("doing serial hangup...");
+#endif
+ if (info->tty)
+ tty_hangup(info->tty);
+ }
+ }
+ if (info->flags & ASYNC_CTS_FLOW) {
+ if (info->tty->hw_stopped) {
+ if (!(status & SER_CTS)) {
+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
+ printk("CTS tx start...");
+#endif
+ info->tty->hw_stopped = 0;
+ info->IER |= UART_IER_THRI;
+ custom.intena = IF_SETCLR | IF_TBE;
+ mb();
+ /* set a pending Tx Interrupt, transmitter should restart now */
+ custom.intreq = IF_SETCLR | IF_TBE;
+ mb();
+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+ return;
+ }
+ } else {
+ if ((status & SER_CTS)) {
+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
+ printk("CTS tx stop...");
+#endif
+ info->tty->hw_stopped = 1;
+ info->IER &= ~UART_IER_THRI;
+ /* disable Tx interrupt and remove any pending interrupts */
+ custom.intena = IF_TBE;
+ mb();
+ custom.intreq = IF_TBE;
+ mb();
+ }
+ }
+ }
+}
+
+static irqreturn_t ser_vbl_int( int irq, void *data, struct pt_regs *regs)
+{
+ /* vbl is just a periodic interrupt we tie into to update modem status */
+ struct async_struct * info = IRQ_ports;
+ /*
+ * TBD - is it better to unregister from this interrupt or to
+ * ignore it if MSI is clear ?
+ */
+ if(info->IER & UART_IER_MSI)
+ check_modem_status(info);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ser_rx_int(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct async_struct * info;
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("ser_rx_int...");
+#endif
+
+ info = IRQ_ports;
+ if (!info || !info->tty)
+ return IRQ_NONE;
+
+ receive_chars(info);
+ info->last_active = jiffies;
+#ifdef SERIAL_DEBUG_INTR
+ printk("end.\n");
+#endif
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ser_tx_int(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct async_struct * info;
+
+ if (custom.serdatr & SDR_TBE) {
+#ifdef SERIAL_DEBUG_INTR
+ printk("ser_tx_int...");
+#endif
+
+ info = IRQ_ports;
+ if (!info || !info->tty)
+ return IRQ_NONE;
+
+ transmit_chars(info);
+ info->last_active = jiffies;
+#ifdef SERIAL_DEBUG_INTR
+ printk("end.\n");
+#endif
+ }
+ return IRQ_HANDLED;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used to handle the "bottom half" processing for the
+ * serial driver, known also the "software interrupt" processing.
+ * This processing is done at the kernel interrupt level, after the
+ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
+ * is where time-consuming activities which can not be done in the
+ * interrupt driver proper are done; the interrupt driver schedules
+ * them using rs_sched_event(), and they get done here.
+ */
+
+static void do_softint(unsigned long private_)
+{
+ struct async_struct *info = (struct async_struct *) private_;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+
+ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
+ tty_wakeup(tty);
+ wake_up_interruptible(&tty->write_wait);
+ }
+}
+
+/*
+ * ---------------------------------------------------------------
+ * Low level utility subroutines for the serial driver: routines to
+ * figure out the appropriate timeout for an interrupt chain, routines
+ * to initialize and startup a serial port, and routines to shutdown a
+ * serial port. Useful stuff like that.
+ * ---------------------------------------------------------------
+ */
+
+static int startup(struct async_struct * info)
+{
+ unsigned long flags;
+ int retval=0;
+ unsigned long page;
+
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ local_irq_save(flags);
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ free_page(page);
+ goto errout;
+ }
+
+ if (info->xmit.buf)
+ free_page(page);
+ else
+ info->xmit.buf = (unsigned char *) page;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("starting up ttys%d ...", info->line);
+#endif
+
+ /* Clear anything in the input buffer */
+
+ custom.intreq = IF_RBF;
+ mb();
+
+ retval = request_irq(IRQ_AMIGA_VERTB, ser_vbl_int, 0, "serial status", info);
+ if (retval) {
+ if (serial_isroot()) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR,
+ &info->tty->flags);
+ retval = 0;
+ }
+ goto errout;
+ }
+
+ /* enable both Rx and Tx interrupts */
+ custom.intena = IF_SETCLR | IF_RBF | IF_TBE;
+ mb();
+ info->IER = UART_IER_MSI;
+
+ /* remember current state of the DCD and CTS bits */
+ current_ctl_bits = ciab.pra & (SER_DCD | SER_CTS | SER_DSR);
+
+ IRQ_ports = info;
+
+ info->MCR = 0;
+ if (info->tty->termios->c_cflag & CBAUD)
+ info->MCR = SER_DTR | SER_RTS;
+ rtsdtr_ctrl(info->MCR);
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ info->xmit.head = info->xmit.tail = 0;
+
+ /*
+ * Set up the tty->alt_speed kludge
+ */
+ if (info->tty) {
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
+ }
+
+ /*
+ * and set the speed of the serial port
+ */
+ change_speed(info, NULL);
+
+ info->flags |= ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+ return 0;
+
+errout:
+ local_irq_restore(flags);
+ return retval;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(struct async_struct * info)
+{
+ unsigned long flags;
+ struct serial_state *state;
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ return;
+
+ state = info->state;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("Shutting down serial port %d ....\n", info->line);
+#endif
+
+ local_irq_save(flags); /* Disable interrupts */
+
+ /*
+ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
+ * here so the queue might never be waken up
+ */
+ wake_up_interruptible(&info->delta_msr_wait);
+
+ IRQ_ports = NULL;
+
+ /*
+ * Free the IRQ, if necessary
+ */
+ free_irq(IRQ_AMIGA_VERTB, info);
+
+ if (info->xmit.buf) {
+ free_page((unsigned long) info->xmit.buf);
+ info->xmit.buf = NULL;
+ }
+
+ info->IER = 0;
+ custom.intena = IF_RBF | IF_TBE;
+ mb();
+
+ /* disable break condition */
+ custom.adkcon = AC_UARTBRK;
+ mb();
+
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ info->MCR &= ~(SER_DTR|SER_RTS);
+ rtsdtr_ctrl(info->MCR);
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+}
+
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static void change_speed(struct async_struct *info,
+ struct termios *old_termios)
+{
+ int quot = 0, baud_base, baud;
+ unsigned cflag, cval = 0;
+ int bits;
+ unsigned long flags;
+
+ if (!info->tty || !info->tty->termios)
+ return;
+ cflag = info->tty->termios->c_cflag;
+
+ /* Byte size is always 8 bits plus parity bit if requested */
+
+ cval = 3; bits = 10;
+ if (cflag & CSTOPB) {
+ cval |= 0x04;
+ bits++;
+ }
+ if (cflag & PARENB) {
+ cval |= UART_LCR_PARITY;
+ bits++;
+ }
+ if (!(cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /* Determine divisor based on baud rate */
+ baud = tty_get_baud_rate(info->tty);
+ if (!baud)
+ baud = 9600; /* B0 transition handled in rs_set_termios */
+ baud_base = info->state->baud_base;
+ if (baud == 38400 &&
+ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ quot = info->state->custom_divisor;
+ else {
+ if (baud == 134)
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
+ quot = baud_base / baud;
+ }
+ /* If the quotient is zero refuse the change */
+ if (!quot && old_termios) {
+ info->tty->termios->c_cflag &= ~CBAUD;
+ info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
+ baud = tty_get_baud_rate(info->tty);
+ if (!baud)
+ baud = 9600;
+ if (baud == 38400 &&
+ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ quot = info->state->custom_divisor;
+ else {
+ if (baud == 134)
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
+ quot = baud_base / baud;
+ }
+ }
+ /* As a last resort, if the quotient is zero, default to 9600 bps */
+ if (!quot)
+ quot = baud_base / 9600;
+ info->quot = quot;
+ info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base);
+ info->timeout += HZ/50; /* Add .02 seconds of slop */
+
+ /* CTS flow control flag and modem status interrupts */
+ info->IER &= ~UART_IER_MSI;
+ if (info->flags & ASYNC_HARDPPS_CD)
+ info->IER |= UART_IER_MSI;
+ if (cflag & CRTSCTS) {
+ info->flags |= ASYNC_CTS_FLOW;
+ info->IER |= UART_IER_MSI;
+ } else
+ info->flags &= ~ASYNC_CTS_FLOW;
+ if (cflag & CLOCAL)
+ info->flags &= ~ASYNC_CHECK_CD;
+ else {
+ info->flags |= ASYNC_CHECK_CD;
+ info->IER |= UART_IER_MSI;
+ }
+ /* TBD:
+ * Does clearing IER_MSI imply that we should disbale the VBL interrupt ?
+ */
+
+ /*
+ * Set up parity check flag
+ */
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ info->read_status_mask = UART_LSR_OE | UART_LSR_DR;
+ if (I_INPCK(info->tty))
+ info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ info->read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characters to ignore
+ */
+ info->ignore_status_mask = 0;
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (I_IGNBRK(info->tty)) {
+ info->ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask |= UART_LSR_OE;
+ }
+ /*
+ * !!! ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ info->ignore_status_mask |= UART_LSR_DR;
+ local_irq_save(flags);
+
+ {
+ short serper;
+
+ /* Set up the baud rate */
+ serper = quot - 1;
+
+ /* Enable or disable parity bit */
+
+ if(cval & UART_LCR_PARITY)
+ serper |= (SERPER_PARENB);
+
+ custom.serper = serper;
+ mb();
+ }
+
+ info->LCR = cval; /* Save LCR */
+ local_irq_restore(flags);
+}
+
+static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_put_char"))
+ return;
+
+ if (!tty || !info->xmit.buf)
+ return;
+
+ local_irq_save(flags);
+ if (CIRC_SPACE(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE) == 0) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ info->xmit.buf[info->xmit.head++] = ch;
+ info->xmit.head &= SERIAL_XMIT_SIZE-1;
+ local_irq_restore(flags);
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
+ return;
+
+ if (info->xmit.head == info->xmit.tail
+ || tty->stopped
+ || tty->hw_stopped
+ || !info->xmit.buf)
+ return;
+
+ local_irq_save(flags);
+ info->IER |= UART_IER_THRI;
+ custom.intena = IF_SETCLR | IF_TBE;
+ mb();
+ /* set a pending Tx Interrupt, transmitter should restart now */
+ custom.intreq = IF_SETCLR | IF_TBE;
+ mb();
+ local_irq_restore(flags);
+}
+
+static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count)
+{
+ int c, ret = 0;
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_write"))
+ return 0;
+
+ if (!tty || !info->xmit.buf || !tmp_buf)
+ return 0;
+
+ local_save_flags(flags);
+ local_irq_disable();
+ while (1) {
+ c = CIRC_SPACE_TO_END(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0) {
+ break;
+ }
+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
+ info->xmit.head = ((info->xmit.head + c) &
+ (SERIAL_XMIT_SIZE-1));
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ local_irq_restore(flags);
+
+ if (info->xmit.head != info->xmit.tail
+ && !tty->stopped
+ && !tty->hw_stopped
+ && !(info->IER & UART_IER_THRI)) {
+ info->IER |= UART_IER_THRI;
+ local_irq_disable();
+ custom.intena = IF_SETCLR | IF_TBE;
+ mb();
+ /* set a pending Tx Interrupt, transmitter should restart now */
+ custom.intreq = IF_SETCLR | IF_TBE;
+ mb();
+ local_irq_restore(flags);
+ }
+ return ret;
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_write_room"))
+ return 0;
+ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
+ return 0;
+ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static void rs_flush_buffer(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
+ return;
+ local_irq_save(flags);
+ info->xmit.head = info->xmit.tail = 0;
+ local_irq_restore(flags);
+ wake_up_interruptible(&tty->write_wait);
+ tty_wakeup(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void rs_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_send_char"))
+ return;
+
+ info->x_char = ch;
+ if (ch) {
+ /* Make sure transmit interrupts are on */
+
+ /* Check this ! */
+ local_irq_save(flags);
+ if(!(custom.intenar & IF_TBE)) {
+ custom.intena = IF_SETCLR | IF_TBE;
+ mb();
+ /* set a pending Tx Interrupt, transmitter should restart now */
+ custom.intreq = IF_SETCLR | IF_TBE;
+ mb();
+ }
+ local_irq_restore(flags);
+
+ info->IER |= UART_IER_THRI;
+ }
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_throttle(struct tty_struct * tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("throttle %s: %d....\n", tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty));
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "rs_throttle"))
+ return;
+
+ if (I_IXOFF(tty))
+ rs_send_xchar(tty, STOP_CHAR(tty));
+
+ if (tty->termios->c_cflag & CRTSCTS)
+ info->MCR &= ~SER_RTS;
+
+ local_irq_save(flags);
+ rtsdtr_ctrl(info->MCR);
+ local_irq_restore(flags);
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("unthrottle %s: %d....\n", tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty));
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
+ return;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ rs_send_xchar(tty, START_CHAR(tty));
+ }
+ if (tty->termios->c_cflag & CRTSCTS)
+ info->MCR |= SER_RTS;
+ local_irq_save(flags);
+ rtsdtr_ctrl(info->MCR);
+ local_irq_restore(flags);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+static int get_serial_info(struct async_struct * info,
+ struct serial_struct * retinfo)
+{
+ struct serial_struct tmp;
+ struct serial_state *state = info->state;
+
+ if (!retinfo)
+ return -EFAULT;
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = state->type;
+ tmp.line = state->line;
+ tmp.port = state->port;
+ tmp.irq = state->irq;
+ tmp.flags = state->flags;
+ tmp.xmit_fifo_size = state->xmit_fifo_size;
+ tmp.baud_base = state->baud_base;
+ tmp.close_delay = state->close_delay;
+ tmp.closing_wait = state->closing_wait;
+ tmp.custom_divisor = state->custom_divisor;
+ if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int set_serial_info(struct async_struct * info,
+ struct serial_struct * new_info)
+{
+ struct serial_struct new_serial;
+ struct serial_state old_state, *state;
+ unsigned int change_irq,change_port;
+ int retval = 0;
+
+ if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+ return -EFAULT;
+ state = info->state;
+ old_state = *state;
+
+ change_irq = new_serial.irq != state->irq;
+ change_port = (new_serial.port != state->port);
+ if(change_irq || change_port || (new_serial.xmit_fifo_size != state->xmit_fifo_size))
+ return -EINVAL;
+
+ if (!serial_isroot()) {
+ if ((new_serial.baud_base != state->baud_base) ||
+ (new_serial.close_delay != state->close_delay) ||
+ (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (state->flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ state->flags = ((state->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ state->custom_divisor = new_serial.custom_divisor;
+ goto check_and_exit;
+ }
+
+ if (new_serial.baud_base < 9600)
+ return -EINVAL;
+
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+
+ state->baud_base = new_serial.baud_base;
+ state->flags = ((state->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
+ info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
+ (info->flags & ASYNC_INTERNAL_FLAGS));
+ state->custom_divisor = new_serial.custom_divisor;
+ state->close_delay = new_serial.close_delay * HZ/100;
+ state->closing_wait = new_serial.closing_wait * HZ/100;
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+check_and_exit:
+ if (info->flags & ASYNC_INITIALIZED) {
+ if (((old_state.flags & ASYNC_SPD_MASK) !=
+ (state->flags & ASYNC_SPD_MASK)) ||
+ (old_state.custom_divisor != state->custom_divisor)) {
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
+ change_speed(info, NULL);
+ }
+ } else
+ retval = startup(info);
+ return retval;
+}
+
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info(struct async_struct * info, unsigned int *value)
+{
+ unsigned char status;
+ unsigned int result;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ status = custom.serdatr;
+ mb();
+ local_irq_restore(flags);
+ result = ((status & SDR_TSRE) ? TIOCSER_TEMT : 0);
+ if (copy_to_user(value, &result, sizeof(int)))
+ return -EFAULT;
+ return 0;
+}
+
+
+static int rs_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ unsigned char control, status;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+ return -ENODEV;
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ control = info->MCR;
+ local_irq_save(flags);
+ status = ciab.pra;
+ local_irq_restore(flags);
+ return ((control & SER_RTS) ? TIOCM_RTS : 0)
+ | ((control & SER_DTR) ? TIOCM_DTR : 0)
+ | (!(status & SER_DCD) ? TIOCM_CAR : 0)
+ | (!(status & SER_DSR) ? TIOCM_DSR : 0)
+ | (!(status & SER_CTS) ? TIOCM_CTS : 0);
+}
+
+static int rs_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+ return -ENODEV;
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ local_irq_save(flags);
+ if (set & TIOCM_RTS)
+ info->MCR |= SER_RTS;
+ if (set & TIOCM_DTR)
+ info->MCR |= SER_DTR;
+ if (clear & TIOCM_RTS)
+ info->MCR &= ~SER_RTS;
+ if (clear & TIOCM_DTR)
+ info->MCR &= ~SER_DTR;
+ rtsdtr_ctrl(info->MCR);
+ local_irq_restore(flags);
+ return 0;
+}
+
+/*
+ * rs_break() --- routine which turns the break handling on or off
+ */
+static void rs_break(struct tty_struct *tty, int break_state)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_break"))
+ return;
+
+ local_irq_save(flags);
+ if (break_state == -1)
+ custom.adkcon = AC_SETCLR | AC_UARTBRK;
+ else
+ custom.adkcon = AC_UARTBRK;
+ mb();
+ local_irq_restore(flags);
+}
+
+
+static int rs_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct async_icount cprev, cnow; /* kernel counter temps */
+ struct serial_icounter_struct icount;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+ return -ENODEV;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return get_serial_info(info,
+ (struct serial_struct *) arg);
+ case TIOCSSERIAL:
+ return set_serial_info(info,
+ (struct serial_struct *) arg);
+ case TIOCSERCONFIG:
+ return 0;
+
+ case TIOCSERGETLSR: /* Get line status register */
+ return get_lsr_info(info, (unsigned int *) arg);
+
+ case TIOCSERGSTRUCT:
+ if (copy_to_user((struct async_struct *) arg,
+ info, sizeof(struct async_struct)))
+ return -EFAULT;
+ return 0;
+
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+ local_irq_save(flags);
+ /* note the counters on entry */
+ cprev = info->state->icount;
+ local_irq_restore(flags);
+ while (1) {
+ interruptible_sleep_on(&info->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ local_irq_save(flags);
+ cnow = info->state->icount; /* atomic copy */
+ local_irq_restore(flags);
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
+ return 0;
+ }
+ cprev = cnow;
+ }
+ /* NOTREACHED */
+
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ local_irq_save(flags);
+ cnow = info->state->icount;
+ local_irq_restore(flags);
+ icount.cts = cnow.cts;
+ icount.dsr = cnow.dsr;
+ icount.rng = cnow.rng;
+ icount.dcd = cnow.dcd;
+ icount.rx = cnow.rx;
+ icount.tx = cnow.tx;
+ icount.frame = cnow.frame;
+ icount.overrun = cnow.overrun;
+ icount.parity = cnow.parity;
+ icount.brk = cnow.brk;
+ icount.buf_overrun = cnow.buf_overrun;
+
+ if (copy_to_user((void *)arg, &icount, sizeof(icount)))
+ return -EFAULT;
+ return 0;
+ case TIOCSERGWILD:
+ case TIOCSERSWILD:
+ /* "setserial -W" is called in Debian boot */
+ printk ("TIOCSER?WILD ioctl obsolete, ignored.\n");
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+ unsigned int cflag = tty->termios->c_cflag;
+
+ if ( (cflag == old_termios->c_cflag)
+ && ( RELEVANT_IFLAG(tty->termios->c_iflag)
+ == RELEVANT_IFLAG(old_termios->c_iflag)))
+ return;
+
+ change_speed(info, old_termios);
+
+ /* Handle transition to B0 status */
+ if ((old_termios->c_cflag & CBAUD) &&
+ !(cflag & CBAUD)) {
+ info->MCR &= ~(SER_DTR|SER_RTS);
+ local_irq_save(flags);
+ rtsdtr_ctrl(info->MCR);
+ local_irq_restore(flags);
+ }
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) &&
+ (cflag & CBAUD)) {
+ info->MCR |= SER_DTR;
+ if (!(tty->termios->c_cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags)) {
+ info->MCR |= SER_RTS;
+ }
+ local_irq_save(flags);
+ rtsdtr_ctrl(info->MCR);
+ local_irq_restore(flags);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ rs_start(tty);
+ }
+
+#if 0
+ /*
+ * No need to wake up processes in open wait, since they
+ * sample the CLOCAL flag once, and don't recheck it.
+ * XXX It's not clear whether the current behavior is correct
+ * or not. Hence, this may change.....
+ */
+ if (!(old_termios->c_cflag & CLOCAL) &&
+ (tty->termios->c_cflag & CLOCAL))
+ wake_up_interruptible(&info->open_wait);
+#endif
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct serial_state *state;
+ unsigned long flags;
+
+ if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
+ return;
+
+ state = info->state;
+
+ local_irq_save(flags);
+
+ if (tty_hung_up_p(filp)) {
+ DBG_CNT("before DEC-hung");
+ local_irq_restore(flags);
+ return;
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_close ttys%d, count = %d\n", info->line, state->count);
+#endif
+ if ((tty->count == 1) && (state->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. state->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("rs_close: bad serial port count; tty->count is 1, "
+ "state->count is %d\n", state->count);
+ state->count = 1;
+ }
+ if (--state->count < 0) {
+ printk("rs_close: bad serial port count for ttys%d: %d\n",
+ info->line, state->count);
+ state->count = 0;
+ }
+ if (state->count) {
+ DBG_CNT("before DEC-2");
+ local_irq_restore(flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->closing_wait);
+ /*
+ * At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts, and tell the
+ * interrupt driver to stop checking the data ready bit in the
+ * line status register.
+ */
+ info->read_status_mask &= ~UART_LSR_DR;
+ if (info->flags & ASYNC_INITIALIZED) {
+ /* disable receive interrupts */
+ custom.intena = IF_RBF;
+ mb();
+ /* clear any pending receive interrupt */
+ custom.intreq = IF_RBF;
+ mb();
+
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
+ */
+ rs_wait_until_sent(tty, info->timeout);
+ }
+ shutdown(info);
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+
+ tty_ldisc_flush(tty);
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = NULL;
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+ local_irq_restore(flags);
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+ int lsr;
+
+ if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
+ return;
+
+ if (info->xmit_fifo_size == 0)
+ return; /* Just in case.... */
+
+ orig_jiffies = jiffies;
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout)
+ char_time = min_t(unsigned long, char_time, timeout);
+ /*
+ * If the transmitter hasn't cleared in twice the approximate
+ * amount of time to send the entire FIFO, it probably won't
+ * ever clear. This assumes the UART isn't doing flow
+ * control, which is currently the case. Hence, if it ever
+ * takes longer than info->timeout, this is probably due to a
+ * UART bug of some kind. So, we clamp the timeout parameter at
+ * 2*info->timeout.
+ */
+ if (!timeout || timeout > 2*info->timeout)
+ timeout = 2*info->timeout;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
+ printk("jiff=%lu...", jiffies);
+#endif
+ while(!((lsr = custom.serdatr) & SDR_TSRE)) {
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("serdatr = %d (jiff=%lu)...", lsr, jiffies);
+#endif
+ msleep_interruptible(jiffies_to_msecs(char_time));
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+ current->state = TASK_RUNNING;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
+#endif
+}
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rs_hangup(struct tty_struct *tty)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct serial_state *state = info->state;
+
+ if (serial_paranoia_check(info, tty->name, "rs_hangup"))
+ return;
+
+ state = info->state;
+
+ rs_flush_buffer(tty);
+ shutdown(info);
+ info->event = 0;
+ state->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = NULL;
+ wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int block_til_ready(struct tty_struct *tty, struct file * filp,
+ struct async_struct *info)
+{
+#ifdef DECLARE_WAITQUEUE
+ DECLARE_WAITQUEUE(wait, current);
+#else
+ struct wait_queue wait = { current, NULL };
+#endif
+ struct serial_state *state = info->state;
+ int retval;
+ int do_clocal = 0, extra_count = 0;
+ unsigned long flags;
+
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, state->count is dropped by one, so that
+ * rs_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready before block: ttys%d, count = %d\n",
+ state->line, state->count);
+#endif
+ local_irq_save(flags);
+ if (!tty_hung_up_p(filp)) {
+ extra_count = 1;
+ state->count--;
+ }
+ local_irq_restore(flags);
+ info->blocked_open++;
+ while (1) {
+ local_irq_save(flags);
+ if (tty->termios->c_cflag & CBAUD)
+ rtsdtr_ctrl(SER_DTR|SER_RTS);
+ local_irq_restore(flags);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & ASYNC_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+#else
+ retval = -EAGAIN;
+#endif
+ break;
+ }
+ if (!(info->flags & ASYNC_CLOSING) &&
+ (do_clocal || (!(ciab.pra & SER_DCD)) ))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready blocking: ttys%d, count = %d\n",
+ info->line, state->count);
+#endif
+ schedule();
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->open_wait, &wait);
+ if (extra_count)
+ state->count++;
+ info->blocked_open--;
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready after blocking: ttys%d, count = %d\n",
+ info->line, state->count);
+#endif
+ if (retval)
+ return retval;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+}
+
+static int get_async_struct(int line, struct async_struct **ret_info)
+{
+ struct async_struct *info;
+ struct serial_state *sstate;
+
+ sstate = rs_table + line;
+ sstate->count++;
+ if (sstate->info) {
+ *ret_info = sstate->info;
+ return 0;
+ }
+ info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
+ if (!info) {
+ sstate->count--;
+ return -ENOMEM;
+ }
+ memset(info, 0, sizeof(struct async_struct));
+#ifdef DECLARE_WAITQUEUE
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->delta_msr_wait);
+#endif
+ info->magic = SERIAL_MAGIC;
+ info->port = sstate->port;
+ info->flags = sstate->flags;
+ info->xmit_fifo_size = sstate->xmit_fifo_size;
+ info->line = line;
+ tasklet_init(&info->tlet, do_softint, (unsigned long)info);
+ info->state = sstate;
+ if (sstate->info) {
+ kfree(info);
+ *ret_info = sstate->info;
+ return 0;
+ }
+ *ret_info = sstate->info = info;
+ return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int rs_open(struct tty_struct *tty, struct file * filp)
+{
+ struct async_struct *info;
+ int retval, line;
+ unsigned long page;
+
+ line = tty->index;
+ if ((line < 0) || (line >= NR_PORTS)) {
+ return -ENODEV;
+ }
+ retval = get_async_struct(line, &info);
+ if (retval) {
+ return retval;
+ }
+ tty->driver_data = info;
+ info->tty = tty;
+ if (serial_paranoia_check(info, tty->name, "rs_open"))
+ return -ENODEV;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open %s, count = %d\n", tty->name, info->state->count);
+#endif
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ if (!tmp_buf) {
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page) {
+ return -ENOMEM;
+ }
+ if (tmp_buf)
+ free_page(page);
+ else
+ tmp_buf = (unsigned char *) page;
+ }
+
+ /*
+ * If the port is the middle of closing, bail out now
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval) {
+ return retval;
+ }
+
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open returning after block_til_ready with %d\n",
+ retval);
+#endif
+ return retval;
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open %s successful...", tty->name);
+#endif
+ return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline int line_info(char *buf, struct serial_state *state)
+{
+ struct async_struct *info = state->info, scr_info;
+ char stat_buf[30], control, status;
+ int ret;
+ unsigned long flags;
+
+ ret = sprintf(buf, "%d: uart:amiga_builtin",state->line);
+
+ /*
+ * Figure out the current RS-232 lines
+ */
+ if (!info) {
+ info = &scr_info; /* This is just for serial_{in,out} */
+
+ info->magic = SERIAL_MAGIC;
+ info->flags = state->flags;
+ info->quot = 0;
+ info->tty = NULL;
+ }
+ local_irq_save(flags);
+ status = ciab.pra;
+ control = info ? info->MCR : status;
+ local_irq_restore(flags);
+
+ stat_buf[0] = 0;
+ stat_buf[1] = 0;
+ if(!(control & SER_RTS))
+ strcat(stat_buf, "|RTS");
+ if(!(status & SER_CTS))
+ strcat(stat_buf, "|CTS");
+ if(!(control & SER_DTR))
+ strcat(stat_buf, "|DTR");
+ if(!(status & SER_DSR))
+ strcat(stat_buf, "|DSR");
+ if(!(status & SER_DCD))
+ strcat(stat_buf, "|CD");
+
+ if (info->quot) {
+ ret += sprintf(buf+ret, " baud:%d",
+ state->baud_base / info->quot);
+ }
+
+ ret += sprintf(buf+ret, " tx:%d rx:%d",
+ state->icount.tx, state->icount.rx);
+
+ if (state->icount.frame)
+ ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
+
+ if (state->icount.parity)
+ ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
+
+ if (state->icount.brk)
+ ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
+
+ if (state->icount.overrun)
+ ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
+
+ /*
+ * Last thing is the RS-232 status lines
+ */
+ ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+ return ret;
+}
+
+static int rs_read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ int len = 0, l;
+ off_t begin = 0;
+
+ len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
+ l = line_info(page + len, &rs_table[0]);
+ len += l;
+ if (len+begin > off+count)
+ goto done;
+ if (len+begin < off) {
+ begin += len;
+ len = 0;
+ }
+ *eof = 1;
+done:
+ if (off >= len+begin)
+ return 0;
+ *start = page + (off-begin);
+ return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/*
+ * ---------------------------------------------------------------------
+ * rs_init() and friends
+ *
+ * rs_init() is called at boot-time to initialize the serial driver.
+ * ---------------------------------------------------------------------
+ */
+
+/*
+ * This routine prints out the appropriate serial driver version
+ * number, and identifies which options were configured into this
+ * driver.
+ */
+static _INLINE_ void show_serial_version(void)
+{
+ printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
+}
+
+
+int register_serial(struct serial_struct *req);
+void unregister_serial(int line);
+
+
+static struct tty_operations serial_ops = {
+ .open = rs_open,
+ .close = rs_close,
+ .write = rs_write,
+ .put_char = rs_put_char,
+ .flush_chars = rs_flush_chars,
+ .write_room = rs_write_room,
+ .chars_in_buffer = rs_chars_in_buffer,
+ .flush_buffer = rs_flush_buffer,
+ .ioctl = rs_ioctl,
+ .throttle = rs_throttle,
+ .unthrottle = rs_unthrottle,
+ .set_termios = rs_set_termios,
+ .stop = rs_stop,
+ .start = rs_start,
+ .hangup = rs_hangup,
+ .break_ctl = rs_break,
+ .send_xchar = rs_send_xchar,
+ .wait_until_sent = rs_wait_until_sent,
+ .read_proc = rs_read_proc,
+ .tiocmget = rs_tiocmget,
+ .tiocmset = rs_tiocmset,
+};
+
+/*
+ * The serial driver boot-time initialization code!
+ */
+static int __init rs_init(void)
+{
+ unsigned long flags;
+ struct serial_state * state;
+
+ if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_SERIAL))
+ return -ENODEV;
+
+ serial_driver = alloc_tty_driver(1);
+ if (!serial_driver)
+ return -ENOMEM;
+
+ /*
+ * We request SERDAT and SERPER only, because the serial registers are
+ * too spreaded over the custom register space
+ */
+ if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4, "amiserial [Paula]"))
+ return -EBUSY;
+
+ IRQ_ports = NULL;
+
+ show_serial_version();
+
+ /* Initialize the tty_driver structure */
+
+ serial_driver->owner = THIS_MODULE;
+ serial_driver->driver_name = "amiserial";
+ serial_driver->name = "ttyS";
+ serial_driver->major = TTY_MAJOR;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(serial_driver, &serial_ops);
+
+ if (tty_register_driver(serial_driver))
+ panic("Couldn't register serial driver\n");
+
+ state = rs_table;
+ state->magic = SSTATE_MAGIC;
+ state->port = (int)&custom.serdatr; /* Just to give it a value */
+ state->line = 0;
+ state->custom_divisor = 0;
+ state->close_delay = 5*HZ/10;
+ state->closing_wait = 30*HZ;
+ state->icount.cts = state->icount.dsr =
+ state->icount.rng = state->icount.dcd = 0;
+ state->icount.rx = state->icount.tx = 0;
+ state->icount.frame = state->icount.parity = 0;
+ state->icount.overrun = state->icount.brk = 0;
+ /*
+ if(state->port && check_region(state->port,REGION_LENGTH(state)))
+ continue;
+ */
+
+ printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n",
+ state->line);
+
+ /* Hardware set up */
+
+ state->baud_base = amiga_colorclock;
+ state->xmit_fifo_size = 1;
+
+ local_irq_save(flags);
+
+ /* set ISRs, and then disable the rx interrupts */
+ request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
+ request_irq(IRQ_AMIGA_RBF, ser_rx_int, SA_INTERRUPT, "serial RX", state);
+
+ /* turn off Rx and Tx interrupts */
+ custom.intena = IF_RBF | IF_TBE;
+ mb();
+
+ /* clear any pending interrupt */
+ custom.intreq = IF_RBF | IF_TBE;
+ mb();
+
+ local_irq_restore(flags);
+
+ /*
+ * set the appropriate directions for the modem control flags,
+ * and clear RTS and DTR
+ */
+ ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */
+ ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */
+
+ return 0;
+}
+
+static __exit void rs_exit(void)
+{
+ int error;
+ struct async_struct *info = rs_table[0].info;
+
+ /* printk("Unloading %s: version %s\n", serial_name, serial_version); */
+ tasklet_kill(&info->tlet);
+ if ((error = tty_unregister_driver(serial_driver)))
+ printk("SERIAL: failed to unregister serial driver (%d)\n",
+ error);
+ put_tty_driver(serial_driver);
+
+ if (info) {
+ rs_table[0].info = NULL;
+ kfree(info);
+ }
+
+ if (tmp_buf) {
+ free_page((unsigned long) tmp_buf);
+ tmp_buf = NULL;
+ }
+
+ release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
+}
+
+module_init(rs_init)
+module_exit(rs_exit)
+
+
+/*
+ * ------------------------------------------------------------
+ * Serial console driver
+ * ------------------------------------------------------------
+ */
+#ifdef CONFIG_SERIAL_CONSOLE
+
+static void amiga_serial_putc(char c)
+{
+ custom.serdat = (unsigned char)c | 0x100;
+ while (!(custom.serdatr & 0x2000))
+ barrier();
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console must be locked when we get here.
+ */
+static void serial_console_write(struct console *co, const char *s,
+ unsigned count)
+{
+ unsigned short intena = custom.intenar;
+
+ custom.intena = IF_TBE;
+
+ while (count--) {
+ if (*s == '\n')
+ amiga_serial_putc('\r');
+ amiga_serial_putc(*s++);
+ }
+
+ custom.intena = IF_SETCLR | (intena & IF_TBE);
+}
+
+static struct tty_driver *serial_console_device(struct console *c, int *index)
+{
+ *index = 0;
+ return serial_driver;
+}
+
+static struct console sercons = {
+ .name = "ttyS",
+ .write = serial_console_write,
+ .device = serial_console_device,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+/*
+ * Register console.
+ */
+static int __init amiserial_console_init(void)
+{
+ register_console(&sercons);
+ return 0;
+}
+console_initcall(amiserial_console_init);
+#endif
+
+MODULE_LICENSE("GPL");