summaryrefslogtreecommitdiff
path: root/drivers/clocksource
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-04-08 20:34:19 +0400
committerArnd Bergmann <arnd@arndb.de>2013-04-08 20:34:19 +0400
commit6b5606e0834bb173a8ce3505edec078f135e9f6c (patch)
tree9f3bdc09be01e14fb68368b1c111a04cc570518f /drivers/clocksource
parente9069cf8b74b50d804fd540a9fd1383504f4af93 (diff)
parent4f0f234fce1d263cc9881456352e8fd56ead0514 (diff)
downloadlinux-6b5606e0834bb173a8ce3505edec078f135e9f6c.tar.xz
Merge branch 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx into next/drivers
From Michal Simek <michal.simek@xilinx.com>: * 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx: arm: zynq: Move timer to generic location arm: zynq: Do not use xilinx specific function names arm: zynq: Move timer to clocksource interface arm: zynq: Use standard timer binding Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/Kconfig3
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/bcm2835_timer.c12
-rw-r--r--drivers/clocksource/cadence_ttc_timer.c436
-rw-r--r--drivers/clocksource/clksrc-of.c5
-rw-r--r--drivers/clocksource/tegra20_timer.c73
-rw-r--r--drivers/clocksource/vt8500_timer.c16
7 files changed, 473 insertions, 73 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index e507ab7df60b..3167fda9bbb3 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -31,6 +31,9 @@ config SUNXI_TIMER
config VT8500_TIMER
bool
+config CADENCE_TTC_TIMER
+ bool
+
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 4d8283aec5b5..e74c8ce26bf0 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
+obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index 50c68fef944b..766611d29945 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -95,23 +95,13 @@ static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id)
}
}
-static struct of_device_id bcm2835_time_match[] __initconst = {
- { .compatible = "brcm,bcm2835-system-timer" },
- {}
-};
-
-static void __init bcm2835_timer_init(void)
+static void __init bcm2835_timer_init(struct device_node *node)
{
- struct device_node *node;
void __iomem *base;
u32 freq;
int irq;
struct bcm2835_timer *timer;
- node = of_find_matching_node(NULL, bcm2835_time_match);
- if (!node)
- panic("No bcm2835 timer node");
-
base = of_iomap(node, 0);
if (!base)
panic("Can't remap registers");
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
new file mode 100644
index 000000000000..685bc60e210a
--- /dev/null
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -0,0 +1,436 @@
+/*
+ * This file contains driver for the Cadence Triple Timer Counter Rev 06
+ *
+ * Copyright (C) 2011-2013 Xilinx
+ *
+ * based on arch/mips/kernel/time.c timer driver
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+
+/*
+ * This driver configures the 2 16-bit count-up timers as follows:
+ *
+ * T1: Timer 1, clocksource for generic timekeeping
+ * T2: Timer 2, clockevent source for hrtimers
+ * T3: Timer 3, <unused>
+ *
+ * The input frequency to the timer module for emulation is 2.5MHz which is
+ * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
+ * the timers are clocked at 78.125KHz (12.8 us resolution).
+
+ * The input frequency to the timer module in silicon is configurable and
+ * obtained from device tree. The pre-scaler of 32 is used.
+ */
+
+/*
+ * Timer Register Offset Definitions of Timer 1, Increment base address by 4
+ * and use same offsets for Timer 2
+ */
+#define TTC_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
+#define TTC_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
+#define TTC_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
+#define TTC_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
+#define TTC_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
+#define TTC_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
+
+#define TTC_CNT_CNTRL_DISABLE_MASK 0x1
+
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
+ * work across most input frequency, but it may need to be more dynamic
+ */
+#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
+#define PRESCALE 2048 /* The exponent must match this */
+#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1)
+#define CLK_CNTRL_PRESCALE_EN 1
+#define CNT_CNTRL_RESET (1 << 4)
+
+/**
+ * struct ttc_timer - This definition defines local timer structure
+ *
+ * @base_addr: Base address of timer
+ * @clk: Associated clock source
+ * @clk_rate_change_nb Notifier block for clock rate changes
+ */
+struct ttc_timer {
+ void __iomem *base_addr;
+ struct clk *clk;
+ struct notifier_block clk_rate_change_nb;
+};
+
+#define to_ttc_timer(x) \
+ container_of(x, struct ttc_timer, clk_rate_change_nb)
+
+struct ttc_timer_clocksource {
+ struct ttc_timer ttc;
+ struct clocksource cs;
+};
+
+#define to_ttc_timer_clksrc(x) \
+ container_of(x, struct ttc_timer_clocksource, cs)
+
+struct ttc_timer_clockevent {
+ struct ttc_timer ttc;
+ struct clock_event_device ce;
+};
+
+#define to_ttc_timer_clkevent(x) \
+ container_of(x, struct ttc_timer_clockevent, ce)
+
+/**
+ * ttc_set_interval - Set the timer interval value
+ *
+ * @timer: Pointer to the timer instance
+ * @cycles: Timer interval ticks
+ **/
+static void ttc_set_interval(struct ttc_timer *timer,
+ unsigned long cycles)
+{
+ u32 ctrl_reg;
+
+ /* Disable the counter, set the counter value and re-enable counter */
+ ctrl_reg = __raw_readl(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+
+ __raw_writel(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET);
+
+ /*
+ * Reset the counter (0x10) so that it starts from 0, one-shot
+ * mode makes this needed for timing to be right.
+ */
+ ctrl_reg |= CNT_CNTRL_RESET;
+ ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+}
+
+/**
+ * ttc_clock_event_interrupt - Clock event timer interrupt handler
+ *
+ * @irq: IRQ number of the Timer
+ * @dev_id: void pointer to the ttc_timer instance
+ *
+ * returns: Always IRQ_HANDLED - success
+ **/
+static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id)
+{
+ struct ttc_timer_clockevent *ttce = dev_id;
+ struct ttc_timer *timer = &ttce->ttc;
+
+ /* Acknowledge the interrupt and call event handler */
+ __raw_readl(timer->base_addr + TTC_ISR_OFFSET);
+
+ ttce->ce.event_handler(&ttce->ce);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * __ttc_clocksource_read - Reads the timer counter register
+ *
+ * returns: Current timer counter register value
+ **/
+static cycle_t __ttc_clocksource_read(struct clocksource *cs)
+{
+ struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc;
+
+ return (cycle_t)__raw_readl(timer->base_addr +
+ TTC_COUNT_VAL_OFFSET);
+}
+
+/**
+ * ttc_set_next_event - Sets the time interval for next event
+ *
+ * @cycles: Timer interval ticks
+ * @evt: Address of clock event instance
+ *
+ * returns: Always 0 - success
+ **/
+static int ttc_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+
+ ttc_set_interval(timer, cycles);
+ return 0;
+}
+
+/**
+ * ttc_set_mode - Sets the mode of timer
+ *
+ * @mode: Mode to be set
+ * @evt: Address of clock event instance
+ **/
+static void ttc_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+ struct ttc_timer *timer = &ttce->ttc;
+ u32 ctrl_reg;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ ttc_set_interval(timer,
+ DIV_ROUND_CLOSEST(clk_get_rate(ttce->ttc.clk),
+ PRESCALE * HZ));
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ ctrl_reg = __raw_readl(timer->base_addr +
+ TTC_CNT_CNTRL_OFFSET);
+ ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+ __raw_writel(ctrl_reg,
+ timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+ break;
+ }
+}
+
+static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct ttc_timer *ttc = to_ttc_timer(nb);
+ struct ttc_timer_clocksource *ttccs = container_of(ttc,
+ struct ttc_timer_clocksource, ttc);
+
+ switch (event) {
+ case POST_RATE_CHANGE:
+ /*
+ * Do whatever is necessary to maintain a proper time base
+ *
+ * I cannot find a way to adjust the currently used clocksource
+ * to the new frequency. __clocksource_updatefreq_hz() sounds
+ * good, but does not work. Not sure what's that missing.
+ *
+ * This approach works, but triggers two clocksource switches.
+ * The first after unregister to clocksource jiffies. And
+ * another one after the register to the newly registered timer.
+ *
+ * Alternatively we could 'waste' another HW timer to ping pong
+ * between clock sources. That would also use one register and
+ * one unregister call, but only trigger one clocksource switch
+ * for the cost of another HW timer used by the OS.
+ */
+ clocksource_unregister(&ttccs->cs);
+ clocksource_register_hz(&ttccs->cs,
+ ndata->new_rate / PRESCALE);
+ /* fall through */
+ case PRE_RATE_CHANGE:
+ case ABORT_RATE_CHANGE:
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
+{
+ struct ttc_timer_clocksource *ttccs;
+ int err;
+
+ ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
+ if (WARN_ON(!ttccs))
+ return;
+
+ ttccs->ttc.clk = clk;
+
+ err = clk_prepare_enable(ttccs->ttc.clk);
+ if (WARN_ON(err)) {
+ kfree(ttccs);
+ return;
+ }
+
+ ttccs->ttc.clk_rate_change_nb.notifier_call =
+ ttc_rate_change_clocksource_cb;
+ ttccs->ttc.clk_rate_change_nb.next = NULL;
+ if (clk_notifier_register(ttccs->ttc.clk,
+ &ttccs->ttc.clk_rate_change_nb))
+ pr_warn("Unable to register clock notifier.\n");
+
+ ttccs->ttc.base_addr = base;
+ ttccs->cs.name = "ttc_clocksource";
+ ttccs->cs.rating = 200;
+ ttccs->cs.read = __ttc_clocksource_read;
+ ttccs->cs.mask = CLOCKSOURCE_MASK(16);
+ ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ /*
+ * Setup the clock source counter to be an incrementing counter
+ * with no interrupt and it rolls over at 0xFFFF. Pre-scale
+ * it by 32 also. Let it start running now.
+ */
+ __raw_writel(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET);
+ __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ __raw_writel(CNT_CNTRL_RESET,
+ ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+
+ err = clocksource_register_hz(&ttccs->cs,
+ clk_get_rate(ttccs->ttc.clk) / PRESCALE);
+ if (WARN_ON(err)) {
+ kfree(ttccs);
+ return;
+ }
+}
+
+static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct ttc_timer *ttc = to_ttc_timer(nb);
+ struct ttc_timer_clockevent *ttcce = container_of(ttc,
+ struct ttc_timer_clockevent, ttc);
+
+ switch (event) {
+ case POST_RATE_CHANGE:
+ {
+ unsigned long flags;
+
+ /*
+ * clockevents_update_freq should be called with IRQ disabled on
+ * the CPU the timer provides events for. The timer we use is
+ * common to both CPUs, not sure if we need to run on both
+ * cores.
+ */
+ local_irq_save(flags);
+ clockevents_update_freq(&ttcce->ce,
+ ndata->new_rate / PRESCALE);
+ local_irq_restore(flags);
+
+ /* fall through */
+ }
+ case PRE_RATE_CHANGE:
+ case ABORT_RATE_CHANGE:
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static void __init ttc_setup_clockevent(struct clk *clk,
+ void __iomem *base, u32 irq)
+{
+ struct ttc_timer_clockevent *ttcce;
+ int err;
+
+ ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
+ if (WARN_ON(!ttcce))
+ return;
+
+ ttcce->ttc.clk = clk;
+
+ err = clk_prepare_enable(ttcce->ttc.clk);
+ if (WARN_ON(err)) {
+ kfree(ttcce);
+ return;
+ }
+
+ ttcce->ttc.clk_rate_change_nb.notifier_call =
+ ttc_rate_change_clockevent_cb;
+ ttcce->ttc.clk_rate_change_nb.next = NULL;
+ if (clk_notifier_register(ttcce->ttc.clk,
+ &ttcce->ttc.clk_rate_change_nb))
+ pr_warn("Unable to register clock notifier.\n");
+
+ ttcce->ttc.base_addr = base;
+ ttcce->ce.name = "ttc_clockevent";
+ ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ ttcce->ce.set_next_event = ttc_set_next_event;
+ ttcce->ce.set_mode = ttc_set_mode;
+ ttcce->ce.rating = 200;
+ ttcce->ce.irq = irq;
+ ttcce->ce.cpumask = cpu_possible_mask;
+
+ /*
+ * Setup the clock event timer to be an interval timer which
+ * is prescaled by 32 using the interval interrupt. Leave it
+ * disabled for now.
+ */
+ __raw_writel(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
+ __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ __raw_writel(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET);
+
+ err = request_irq(irq, ttc_clock_event_interrupt,
+ IRQF_DISABLED | IRQF_TIMER,
+ ttcce->ce.name, ttcce);
+ if (WARN_ON(err)) {
+ kfree(ttcce);
+ return;
+ }
+
+ clockevents_config_and_register(&ttcce->ce,
+ clk_get_rate(ttcce->ttc.clk) / PRESCALE, 1, 0xfffe);
+}
+
+/**
+ * ttc_timer_init - Initialize the timer
+ *
+ * Initializes the timer hardware and register the clock source and clock event
+ * timers with Linux kernal timer framework
+ */
+static void __init ttc_timer_init(struct device_node *timer)
+{
+ unsigned int irq;
+ void __iomem *timer_baseaddr;
+ struct clk *clk;
+ static int initialized;
+
+ if (initialized)
+ return;
+
+ initialized = 1;
+
+ /*
+ * Get the 1st Triple Timer Counter (TTC) block from the device tree
+ * and use it. Note that the event timer uses the interrupt and it's the
+ * 2nd TTC hence the irq_of_parse_and_map(,1)
+ */
+ timer_baseaddr = of_iomap(timer, 0);
+ if (!timer_baseaddr) {
+ pr_err("ERROR: invalid timer base address\n");
+ BUG();
+ }
+
+ irq = irq_of_parse_and_map(timer, 1);
+ if (irq <= 0) {
+ pr_err("ERROR: invalid interrupt number\n");
+ BUG();
+ }
+
+ clk = of_clk_get_by_name(timer, "cpu_1x");
+ if (IS_ERR(clk)) {
+ pr_err("ERROR: timer input clock not found\n");
+ BUG();
+ }
+
+ ttc_setup_clocksource(clk, timer_baseaddr);
+ ttc_setup_clockevent(clk, timer_baseaddr + 4, irq);
+
+ pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
+}
+
+CLOCKSOURCE_OF_DECLARE(ttc, "cdns,ttc", ttc_timer_init);
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
index bdabdaa8d00f..37f5325bec95 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-of.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/of.h>
+#include <linux/clocksource.h>
extern struct of_device_id __clksrc_of_table[];
@@ -26,10 +27,10 @@ void __init clocksource_of_init(void)
{
struct device_node *np;
const struct of_device_id *match;
- void (*init_func)(void);
+ clocksource_of_init_fn init_func;
for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
init_func = match->data;
- init_func();
+ init_func(np);
}
}
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index 0bde03feb095..2e4d8a666c36 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -154,29 +154,12 @@ static struct irqaction tegra_timer_irq = {
.dev_id = &tegra_clockevent,
};
-static const struct of_device_id timer_match[] __initconst = {
- { .compatible = "nvidia,tegra20-timer" },
- {}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
- { .compatible = "nvidia,tegra20-rtc" },
- {}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
{
- struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
- np = of_find_matching_node(NULL, timer_match);
- if (!np) {
- pr_err("Failed to find timer DT node\n");
- BUG();
- }
-
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
pr_err("Can't map timer registers\n");
@@ -200,30 +183,6 @@ static void __init tegra20_init_timer(void)
of_node_put(np);
- np = of_find_matching_node(NULL, rtc_match);
- if (!np) {
- pr_err("Failed to find RTC DT node\n");
- BUG();
- }
-
- rtc_base = of_iomap(np, 0);
- if (!rtc_base) {
- pr_err("Can't map RTC registers");
- BUG();
- }
-
- /*
- * rtc registers are used by read_persistent_clock, keep the rtc clock
- * enabled
- */
- clk = clk_get_sys("rtc-tegra", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get rtc-tegra clock\n");
- else
- clk_prepare_enable(clk);
-
- of_node_put(np);
-
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -259,12 +218,34 @@ static void __init tegra20_init_timer(void)
tegra_clockevent.irq = tegra_timer_irq.irq;
clockevents_config_and_register(&tegra_clockevent, 1000000,
0x1, 0x1fffffff);
-#ifdef CONFIG_HAVE_ARM_TWD
- twd_local_timer_of_register();
-#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+ struct clk *clk;
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
+ /*
+ * rtc registers are used by read_persistent_clock, keep the rtc clock
+ * enabled
+ */
+ clk = clk_get_sys("rtc-tegra", NULL);
+ if (IS_ERR(clk))
+ pr_warn("Unable to get rtc-tegra clock\n");
+ else
+ clk_prepare_enable(clk);
+
+ of_node_put(np);
+
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
#ifdef CONFIG_PM
static u32 usec_config;
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index 8efc86b5b5dd..64f553f04fa4 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -129,22 +129,10 @@ static struct irqaction irq = {
.dev_id = &clockevent,
};
-static struct of_device_id vt8500_timer_ids[] = {
- { .compatible = "via,vt8500-timer" },
- { }
-};
-
-static void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(struct device_node *np)
{
- struct device_node *np;
int timer_irq;
- np = of_find_matching_node(NULL, vt8500_timer_ids);
- if (!np) {
- pr_err("%s: Timer description missing from Device Tree\n",
- __func__);
- return;
- }
regbase = of_iomap(np, 0);
if (!regbase) {
pr_err("%s: Missing iobase description in Device Tree\n",
@@ -177,4 +165,4 @@ static void __init vt8500_timer_init(void)
4, 0xf0000000);
}
-CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init);