summaryrefslogtreecommitdiff
path: root/drivers/cpufreq
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-06-05 05:56:20 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-06-05 05:56:20 +0300
commit828f3e18e1cb98c68fc6db4d5113513d4a267775 (patch)
treee1d813f2122dee697e896166917d58f46dff82c5 /drivers/cpufreq
parent298743c193bb50b5d65b9285eb7206ffb31d412d (diff)
parentb5f73d47f34b238221ac771b5fe4907df621d7cb (diff)
downloadlinux-828f3e18e1cb98c68fc6db4d5113513d4a267775.tar.xz
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r--drivers/cpufreq/Kconfig.arm6
-rw-r--r--drivers/cpufreq/tegra20-cpufreq.c217
2 files changed, 59 insertions, 164 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 9481292981f0..c6cbfc8baf72 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -295,11 +295,11 @@ config ARM_TANGO_CPUFREQ
default y
config ARM_TEGRA20_CPUFREQ
- tristate "Tegra20 CPUFreq support"
- depends on ARCH_TEGRA
+ tristate "Tegra20/30 CPUFreq support"
+ depends on ARCH_TEGRA && CPUFREQ_DT
default y
help
- This adds the CPUFreq driver support for Tegra20 SOCs.
+ This adds the CPUFreq driver support for Tegra20/30 SOCs.
config ARM_TEGRA124_CPUFREQ
bool "Tegra124 CPUFreq support"
diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
index f84ecd22f488..8c893043953e 100644
--- a/drivers/cpufreq/tegra20-cpufreq.c
+++ b/drivers/cpufreq/tegra20-cpufreq.c
@@ -7,201 +7,96 @@
* Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation
*/
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
+#include <linux/bits.h>
+#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
#include <linux/types.h>
-static struct cpufreq_frequency_table freq_table[] = {
- { .frequency = 216000 },
- { .frequency = 312000 },
- { .frequency = 456000 },
- { .frequency = 608000 },
- { .frequency = 760000 },
- { .frequency = 816000 },
- { .frequency = 912000 },
- { .frequency = 1000000 },
- { .frequency = CPUFREQ_TABLE_END },
-};
-
-struct tegra20_cpufreq {
- struct device *dev;
- struct cpufreq_driver driver;
- struct clk *cpu_clk;
- struct clk *pll_x_clk;
- struct clk *pll_p_clk;
- bool pll_x_prepared;
-};
+#include <soc/tegra/common.h>
+#include <soc/tegra/fuse.h>
-static unsigned int tegra_get_intermediate(struct cpufreq_policy *policy,
- unsigned int index)
+static bool cpu0_node_has_opp_v2_prop(void)
{
- struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
- unsigned int ifreq = clk_get_rate(cpufreq->pll_p_clk) / 1000;
-
- /*
- * Don't switch to intermediate freq if:
- * - we are already at it, i.e. policy->cur == ifreq
- * - index corresponds to ifreq
- */
- if (freq_table[index].frequency == ifreq || policy->cur == ifreq)
- return 0;
-
- return ifreq;
-}
+ struct device_node *np = of_cpu_device_node_get(0);
+ bool ret = false;
-static int tegra_target_intermediate(struct cpufreq_policy *policy,
- unsigned int index)
-{
- struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
- int ret;
-
- /*
- * Take an extra reference to the main pll so it doesn't turn
- * off when we move the cpu off of it as enabling it again while we
- * switch to it from tegra_target() would take additional time.
- *
- * When target-freq is equal to intermediate freq we don't need to
- * switch to an intermediate freq and so this routine isn't called.
- * Also, we wouldn't be using pll_x anymore and must not take extra
- * reference to it, as it can be disabled now to save some power.
- */
- clk_prepare_enable(cpufreq->pll_x_clk);
-
- ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
- if (ret)
- clk_disable_unprepare(cpufreq->pll_x_clk);
- else
- cpufreq->pll_x_prepared = true;
+ if (of_get_property(np, "operating-points-v2", NULL))
+ ret = true;
+ of_node_put(np);
return ret;
}
-static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
-{
- struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
- unsigned long rate = freq_table[index].frequency;
- unsigned int ifreq = clk_get_rate(cpufreq->pll_p_clk) / 1000;
- int ret;
-
- /*
- * target freq == pll_p, don't need to take extra reference to pll_x_clk
- * as it isn't used anymore.
- */
- if (rate == ifreq)
- return clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_p_clk);
-
- ret = clk_set_rate(cpufreq->pll_x_clk, rate * 1000);
- /* Restore to earlier frequency on error, i.e. pll_x */
- if (ret)
- dev_err(cpufreq->dev, "Failed to change pll_x to %lu\n", rate);
-
- ret = clk_set_parent(cpufreq->cpu_clk, cpufreq->pll_x_clk);
- /* This shouldn't fail while changing or restoring */
- WARN_ON(ret);
-
- /*
- * Drop count to pll_x clock only if we switched to intermediate freq
- * earlier while transitioning to a target frequency.
- */
- if (cpufreq->pll_x_prepared) {
- clk_disable_unprepare(cpufreq->pll_x_clk);
- cpufreq->pll_x_prepared = false;
- }
-
- return ret;
-}
-
-static int tegra_cpu_init(struct cpufreq_policy *policy)
-{
- struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
-
- clk_prepare_enable(cpufreq->cpu_clk);
-
- /* FIXME: what's the actual transition time? */
- cpufreq_generic_init(policy, freq_table, 300 * 1000);
- policy->clk = cpufreq->cpu_clk;
- policy->suspend_freq = freq_table[0].frequency;
- return 0;
-}
-
-static int tegra_cpu_exit(struct cpufreq_policy *policy)
-{
- struct tegra20_cpufreq *cpufreq = cpufreq_get_driver_data();
-
- clk_disable_unprepare(cpufreq->cpu_clk);
- return 0;
-}
-
static int tegra20_cpufreq_probe(struct platform_device *pdev)
{
- struct tegra20_cpufreq *cpufreq;
+ struct platform_device *cpufreq_dt;
+ struct opp_table *opp_table;
+ struct device *cpu_dev;
+ u32 versions[2];
int err;
- cpufreq = devm_kzalloc(&pdev->dev, sizeof(*cpufreq), GFP_KERNEL);
- if (!cpufreq)
- return -ENOMEM;
+ if (!cpu0_node_has_opp_v2_prop()) {
+ dev_err(&pdev->dev, "operating points not found\n");
+ dev_err(&pdev->dev, "please update your device tree\n");
+ return -ENODEV;
+ }
+
+ if (of_machine_is_compatible("nvidia,tegra20")) {
+ versions[0] = BIT(tegra_sku_info.cpu_process_id);
+ versions[1] = BIT(tegra_sku_info.soc_speedo_id);
+ } else {
+ versions[0] = BIT(tegra_sku_info.cpu_process_id);
+ versions[1] = BIT(tegra_sku_info.cpu_speedo_id);
+ }
+
+ dev_info(&pdev->dev, "hardware version 0x%x 0x%x\n",
+ versions[0], versions[1]);
- cpufreq->cpu_clk = clk_get_sys(NULL, "cclk");
- if (IS_ERR(cpufreq->cpu_clk))
- return PTR_ERR(cpufreq->cpu_clk);
+ cpu_dev = get_cpu_device(0);
+ if (WARN_ON(!cpu_dev))
+ return -ENODEV;
- cpufreq->pll_x_clk = clk_get_sys(NULL, "pll_x");
- if (IS_ERR(cpufreq->pll_x_clk)) {
- err = PTR_ERR(cpufreq->pll_x_clk);
- goto put_cpu;
+ opp_table = dev_pm_opp_set_supported_hw(cpu_dev, versions, 2);
+ err = PTR_ERR_OR_ZERO(opp_table);
+ if (err) {
+ dev_err(&pdev->dev, "failed to set supported hw: %d\n", err);
+ return err;
}
- cpufreq->pll_p_clk = clk_get_sys(NULL, "pll_p");
- if (IS_ERR(cpufreq->pll_p_clk)) {
- err = PTR_ERR(cpufreq->pll_p_clk);
- goto put_pll_x;
+ cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ err = PTR_ERR_OR_ZERO(cpufreq_dt);
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to create cpufreq-dt device: %d\n", err);
+ goto err_put_supported_hw;
}
- cpufreq->dev = &pdev->dev;
- cpufreq->driver.get = cpufreq_generic_get;
- cpufreq->driver.attr = cpufreq_generic_attr;
- cpufreq->driver.init = tegra_cpu_init;
- cpufreq->driver.exit = tegra_cpu_exit;
- cpufreq->driver.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK;
- cpufreq->driver.verify = cpufreq_generic_frequency_table_verify;
- cpufreq->driver.suspend = cpufreq_generic_suspend;
- cpufreq->driver.driver_data = cpufreq;
- cpufreq->driver.target_index = tegra_target;
- cpufreq->driver.get_intermediate = tegra_get_intermediate;
- cpufreq->driver.target_intermediate = tegra_target_intermediate;
- snprintf(cpufreq->driver.name, CPUFREQ_NAME_LEN, "tegra");
-
- err = cpufreq_register_driver(&cpufreq->driver);
- if (err)
- goto put_pll_p;
-
- platform_set_drvdata(pdev, cpufreq);
+ platform_set_drvdata(pdev, cpufreq_dt);
return 0;
-put_pll_p:
- clk_put(cpufreq->pll_p_clk);
-put_pll_x:
- clk_put(cpufreq->pll_x_clk);
-put_cpu:
- clk_put(cpufreq->cpu_clk);
+err_put_supported_hw:
+ dev_pm_opp_put_supported_hw(opp_table);
return err;
}
static int tegra20_cpufreq_remove(struct platform_device *pdev)
{
- struct tegra20_cpufreq *cpufreq = platform_get_drvdata(pdev);
+ struct platform_device *cpufreq_dt;
+ struct opp_table *opp_table;
- cpufreq_unregister_driver(&cpufreq->driver);
+ cpufreq_dt = platform_get_drvdata(pdev);
+ platform_device_unregister(cpufreq_dt);
- clk_put(cpufreq->pll_p_clk);
- clk_put(cpufreq->pll_x_clk);
- clk_put(cpufreq->cpu_clk);
+ opp_table = dev_pm_opp_get_opp_table(get_cpu_device(0));
+ dev_pm_opp_put_supported_hw(opp_table);
+ dev_pm_opp_put_opp_table(opp_table);
return 0;
}