Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc/whatever driver subsystem updates
  for 5.12-rc1. Over time it seems like this tree is collecting more and
  more tiny driver subsystems in one place, making it easier for those
  maintainers, which is why this is getting larger.

  Included in here are:

   - coresight driver updates

   - habannalabs driver updates

   - virtual acrn driver addition (proper acks from the x86 maintainers)

   - broadcom misc driver addition

   - speakup driver updates

   - soundwire driver updates

   - fpga driver updates

   - amba driver updates

   - mei driver updates

   - vfio driver updates

   - greybus driver updates

   - nvmeem driver updates

   - phy driver updates

   - mhi driver updates

   - interconnect driver udpates

   - fsl-mc bus driver updates

   - random driver fix

   - some small misc driver updates (rtsx, pvpanic, etc.)

  All of these have been in linux-next for a while, with the only
  reported issue being a merge conflict due to the dfl_device_id
  addition from the fpga subsystem in here"

* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
  spmi: spmi-pmic-arb: Fix hw_irq overflow
  Documentation: coresight: Add PID tracing description
  coresight: etm-perf: Support PID tracing for kernel at EL2
  coresight: etm-perf: Clarify comment on perf options
  ACRN: update MAINTAINERS: mailing list is subscribers-only
  regmap: sdw-mbq: use MODULE_LICENSE("GPL")
  regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
  regmap: sdw: use _no_pm functions in regmap_read/write
  soundwire: intel: fix possible crash when no device is detected
  MAINTAINERS: replace my with email with replacements
  mhi: Fix double dma free
  uapi: map_to_7segment: Update example in documentation
  uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
  drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
  firewire: replace tricky statement by two simple ones
  vme: make remove callback return void
  firmware: google: make coreboot driver's remove callback return void
  firmware: xilinx: Use explicit values for all enum values
  sample/acrn: Introduce a sample of HSM ioctl interface usage
  virt: acrn: Introduce an interface for Service VM to control vCPU
  ...

8 files changed, 738 insertions, 127 deletions

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 5645226ca3ce..5ff9438b7b46 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -192,6 +192,17 @@ config FPGA_DFL_AFU
 	  to the FPGA infrastructure via a Port. There may be more than one
 	  Port/AFU per DFL based FPGA device.
 
+config FPGA_DFL_NIOS_INTEL_PAC_N3000
+	tristate "FPGA DFL NIOS Driver for Intel PAC N3000"
+	depends on FPGA_DFL
+	select REGMAP
+	help
+	  This is the driver for the N3000 Nios private feature on Intel
+	  PAC (Programmable Acceleration Card) N3000. It communicates
+	  with the embedded Nios processor to configure the retimers on
+	  the card. It also instantiates the SPI master (spi-altera) for
+	  the card's BMC (Board Management Controller).
+
 config FPGA_DFL_PCI
 	tristate "FPGA DFL PCIe Device Driver"
 	depends on PCI && FPGA_DFL
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index d8e21dfc6778..18dc9885883a 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -44,5 +44,7 @@ dfl-fme-objs += dfl-fme-perf.o
 dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
 dfl-afu-objs += dfl-afu-error.o
 
+obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000)	+= dfl-n3000-nios.o
+
 # Drivers for FPGAs which implement DFL
 obj-$(CONFIG_FPGA_DFL_PCI)		+= dfl-pci.o
diff --git a/drivers/fpga/dfl-fme-perf.c b/drivers/fpga/dfl-fme-perf.c
index 531266287eee..4299145ef347 100644
--- a/drivers/fpga/dfl-fme-perf.c
+++ b/drivers/fpga/dfl-fme-perf.c
@@ -192,7 +192,7 @@ static struct attribute *fme_perf_cpumask_attrs[] = {
 	NULL,
 };
 
-static struct attribute_group fme_perf_cpumask_group = {
+static const struct attribute_group fme_perf_cpumask_group = {
 	.attrs = fme_perf_cpumask_attrs,
 };
 
@@ -225,7 +225,7 @@ static struct attribute *fme_perf_format_attrs[] = {
 	NULL,
 };
 
-static struct attribute_group fme_perf_format_group = {
+static const struct attribute_group fme_perf_format_group = {
 	.name = "format",
 	.attrs = fme_perf_format_attrs,
 };
@@ -239,7 +239,7 @@ static struct attribute *fme_perf_events_attrs_empty[] = {
 	NULL,
 };
 
-static struct attribute_group fme_perf_events_group = {
+static const struct attribute_group fme_perf_events_group = {
 	.name = "events",
 	.attrs = fme_perf_events_attrs_empty,
 };
diff --git a/drivers/fpga/dfl-n3000-nios.c b/drivers/fpga/dfl-n3000-nios.c
new file mode 100644
index 000000000000..7a95366f6516
--- /dev/null
+++ b/drivers/fpga/dfl-n3000-nios.c
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DFL device driver for Nios private feature on Intel PAC (Programmable
+ * Acceleration Card) N3000
+ *
+ * Copyright (C) 2019-2020 Intel Corporation, Inc.
+ *
+ * Authors:
+ *   Wu Hao <hao.wu@intel.com>
+ *   Xu Yilun <yilun.xu@intel.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/dfl.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/stddef.h>
+#include <linux/spi/altera.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+
+/*
+ * N3000 Nios private feature registers, named as NIOS_SPI_XX on spec.
+ * NS is the abbreviation of NIOS_SPI.
+ */
+#define N3000_NS_PARAM				0x8
+#define N3000_NS_PARAM_SHIFT_MODE_MSK		BIT_ULL(1)
+#define N3000_NS_PARAM_SHIFT_MODE_MSB		0
+#define N3000_NS_PARAM_SHIFT_MODE_LSB		1
+#define N3000_NS_PARAM_DATA_WIDTH		GENMASK_ULL(7, 2)
+#define N3000_NS_PARAM_NUM_CS			GENMASK_ULL(13, 8)
+#define N3000_NS_PARAM_CLK_POL			BIT_ULL(14)
+#define N3000_NS_PARAM_CLK_PHASE		BIT_ULL(15)
+#define N3000_NS_PARAM_PERIPHERAL_ID		GENMASK_ULL(47, 32)
+
+#define N3000_NS_CTRL				0x10
+#define N3000_NS_CTRL_WR_DATA			GENMASK_ULL(31, 0)
+#define N3000_NS_CTRL_ADDR			GENMASK_ULL(44, 32)
+#define N3000_NS_CTRL_CMD_MSK			GENMASK_ULL(63, 62)
+#define N3000_NS_CTRL_CMD_NOP			0
+#define N3000_NS_CTRL_CMD_RD			1
+#define N3000_NS_CTRL_CMD_WR			2
+
+#define N3000_NS_STAT				0x18
+#define N3000_NS_STAT_RD_DATA			GENMASK_ULL(31, 0)
+#define N3000_NS_STAT_RW_VAL			BIT_ULL(32)
+
+/* Nios handshake registers, indirect access */
+#define N3000_NIOS_INIT				0x1000
+#define N3000_NIOS_INIT_DONE			BIT(0)
+#define N3000_NIOS_INIT_START			BIT(1)
+/* Mode for retimer A, link 0, the same below */
+#define N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK	GENMASK(9, 8)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK	GENMASK(11, 10)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK	GENMASK(13, 12)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK	GENMASK(15, 14)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK	GENMASK(17, 16)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK	GENMASK(19, 18)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK	GENMASK(21, 20)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK	GENMASK(23, 22)
+#define N3000_NIOS_INIT_REQ_FEC_MODE_NO		0x0
+#define N3000_NIOS_INIT_REQ_FEC_MODE_KR		0x1
+#define N3000_NIOS_INIT_REQ_FEC_MODE_RS		0x2
+
+#define N3000_NIOS_FW_VERSION			0x1004
+#define N3000_NIOS_FW_VERSION_PATCH		GENMASK(23, 20)
+#define N3000_NIOS_FW_VERSION_MINOR		GENMASK(27, 24)
+#define N3000_NIOS_FW_VERSION_MAJOR		GENMASK(31, 28)
+
+/* The retimers we use on Intel PAC N3000 is Parkvale, abbreviated to PKVL */
+#define N3000_NIOS_PKVL_A_MODE_STS		0x1020
+#define N3000_NIOS_PKVL_B_MODE_STS		0x1024
+#define N3000_NIOS_PKVL_MODE_STS_GROUP_MSK	GENMASK(15, 8)
+#define N3000_NIOS_PKVL_MODE_STS_GROUP_OK	0x0
+#define N3000_NIOS_PKVL_MODE_STS_ID_MSK		GENMASK(7, 0)
+/* When GROUP MASK field == GROUP_OK  */
+#define N3000_NIOS_PKVL_MODE_ID_RESET		0x0
+#define N3000_NIOS_PKVL_MODE_ID_4X10G		0x1
+#define N3000_NIOS_PKVL_MODE_ID_4X25G		0x2
+#define N3000_NIOS_PKVL_MODE_ID_2X25G		0x3
+#define N3000_NIOS_PKVL_MODE_ID_2X25G_2X10G	0x4
+#define N3000_NIOS_PKVL_MODE_ID_1X25G		0x5
+
+#define N3000_NIOS_REGBUS_RETRY_COUNT		10000	/* loop count */
+
+#define N3000_NIOS_INIT_TIMEOUT			10000000	/* usec */
+#define N3000_NIOS_INIT_TIME_INTV		100000		/* usec */
+
+#define N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL	\
+	(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK |	\
+	 N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK |	\
+	 N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK |	\
+	 N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK |	\
+	 N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK |	\
+	 N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK |	\
+	 N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK |	\
+	 N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK)
+
+#define N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL			\
+	(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_NO))
+
+#define N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL			\
+	(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_KR))
+
+#define N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL			\
+	(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS) |		\
+	 FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK,	\
+		    N3000_NIOS_INIT_REQ_FEC_MODE_RS))
+
+struct n3000_nios {
+	void __iomem *base;
+	struct regmap *regmap;
+	struct device *dev;
+	struct platform_device *altera_spi;
+};
+
+static ssize_t nios_fw_version_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct n3000_nios *nn = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%x.%x.%x\n",
+			  (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val),
+			  (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MINOR, val),
+			  (u8)FIELD_GET(N3000_NIOS_FW_VERSION_PATCH, val));
+}
+static DEVICE_ATTR_RO(nios_fw_version);
+
+#define IS_MODE_STATUS_OK(mode_stat)					\
+	(FIELD_GET(N3000_NIOS_PKVL_MODE_STS_GROUP_MSK, (mode_stat)) ==	\
+	 N3000_NIOS_PKVL_MODE_STS_GROUP_OK)
+
+#define IS_RETIMER_FEC_SUPPORTED(retimer_mode)			\
+	((retimer_mode) != N3000_NIOS_PKVL_MODE_ID_RESET &&	\
+	 (retimer_mode) != N3000_NIOS_PKVL_MODE_ID_4X10G)
+
+static int get_retimer_mode(struct n3000_nios *nn, unsigned int mode_stat_reg,
+			    unsigned int *retimer_mode)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(nn->regmap, mode_stat_reg, &val);
+	if (ret)
+		return ret;
+
+	if (!IS_MODE_STATUS_OK(val))
+		return -EFAULT;
+
+	*retimer_mode = FIELD_GET(N3000_NIOS_PKVL_MODE_STS_ID_MSK, val);
+
+	return 0;
+}
+
+static ssize_t retimer_A_mode_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct n3000_nios *nn = dev_get_drvdata(dev);
+	unsigned int mode;
+	int ret;
+
+	ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &mode);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "0x%x\n", mode);
+}
+static DEVICE_ATTR_RO(retimer_A_mode);
+
+static ssize_t retimer_B_mode_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct n3000_nios *nn = dev_get_drvdata(dev);
+	unsigned int mode;
+	int ret;
+
+	ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &mode);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "0x%x\n", mode);
+}
+static DEVICE_ATTR_RO(retimer_B_mode);
+
+static ssize_t fec_mode_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	unsigned int val, retimer_a_mode, retimer_b_mode, fec_modes;
+	struct n3000_nios *nn = dev_get_drvdata(dev);
+	int ret;
+
+	/* FEC mode setting is not supported in early FW versions */
+	ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
+	if (ret)
+		return ret;
+
+	if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) < 3)
+		return sysfs_emit(buf, "not supported\n");
+
+	/* If no 25G links, FEC mode setting is not supported either */
+	ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &retimer_a_mode);
+	if (ret)
+		return ret;
+
+	ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &retimer_b_mode);
+	if (ret)
+		return ret;
+
+	if (!IS_RETIMER_FEC_SUPPORTED(retimer_a_mode) &&
+	    !IS_RETIMER_FEC_SUPPORTED(retimer_b_mode))
+		return sysfs_emit(buf, "not supported\n");
+
+	/* get the valid FEC mode for 25G links */
+	ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * FEC mode should always be the same for all links, as we set them
+	 * in this way.
+	 */
+	fec_modes = (val & N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL);
+	if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL)
+		return sysfs_emit(buf, "no\n");
+	else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL)
+		return sysfs_emit(buf, "kr\n");
+	else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL)
+		return sysfs_emit(buf, "rs\n");
+
+	return -EFAULT;
+}
+static DEVICE_ATTR_RO(fec_mode);
+
+static struct attribute *n3000_nios_attrs[] = {
+	&dev_attr_nios_fw_version.attr,
+	&dev_attr_retimer_A_mode.attr,
+	&dev_attr_retimer_B_mode.attr,
+	&dev_attr_fec_mode.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(n3000_nios);
+
+static int n3000_nios_init_done_check(struct n3000_nios *nn)
+{
+	unsigned int val, state_a, state_b;
+	struct device *dev = nn->dev;
+	int ret, ret2;
+
+	/*
+	 * The SPI is shared by the Nios core inside the FPGA, Nios will use
+	 * this SPI master to do some one time initialization after power up,
+	 * and then release the control to OS. The driver needs to poll on
+	 * INIT_DONE to see when driver could take the control.
+	 *
+	 * Please note that after Nios firmware version 3.0.0, INIT_START is
+	 * introduced, so driver needs to trigger START firstly and then check
+	 * INIT_DONE.
+	 */
+
+	ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * If Nios version register is totally uninitialized(== 0x0), then the
+	 * Nios firmware is missing. So host could take control of SPI master
+	 * safely, but initialization work for Nios is not done. To restore the
+	 * card, we need to reprogram a new Nios firmware via the BMC chip on
+	 * SPI bus. So the driver doesn't error out, it continues to create the
+	 * spi controller device and spi_board_info for BMC.
+	 */
+	if (val == 0) {
+		dev_err(dev, "Nios version reg = 0x%x, skip INIT_DONE check, but the retimer may be uninitialized\n",
+			val);
+		return 0;
+	}
+
+	if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) >= 3) {
+		/* read NIOS_INIT to check if retimer initialization is done */
+		ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val);
+		if (ret)
+			return ret;
+
+		/* check if retimers are initialized already */
+		if (val & (N3000_NIOS_INIT_DONE | N3000_NIOS_INIT_START))
+			goto nios_init_done;
+
+		/* configure FEC mode per module param */
+		val = N3000_NIOS_INIT_START;
+
+		/*
+		 * When the retimer is to be set to 10G mode, there is no FEC
+		 * mode setting, so the REQ_FEC_MODE field will be ignored by
+		 * Nios firmware in this case. But we should still fill the FEC
+		 * mode field cause host could not get the retimer working mode
+		 * until the Nios init is done.
+		 *
+		 * For now the driver doesn't support the retimer FEC mode
+		 * switching per user's request. It is always set to Reed
+		 * Solomon FEC.
+		 *
+		 * The driver will set the same FEC mode for all links.
+		 */
+		val |= N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL;
+
+		ret = regmap_write(nn->regmap, N3000_NIOS_INIT, val);
+		if (ret)
+			return ret;
+	}
+
+nios_init_done:
+	/* polls on NIOS_INIT_DONE */
+	ret = regmap_read_poll_timeout(nn->regmap, N3000_NIOS_INIT, val,
+				       val & N3000_NIOS_INIT_DONE,
+				       N3000_NIOS_INIT_TIME_INTV,
+				       N3000_NIOS_INIT_TIMEOUT);
+	if (ret)
+		dev_err(dev, "NIOS_INIT_DONE %s\n",
+			(ret == -ETIMEDOUT) ? "timed out" : "check error");
+
+	ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_A_MODE_STS, &state_a);
+	if (ret2)
+		return ret2;
+
+	ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_B_MODE_STS, &state_b);
+	if (ret2)
+		return ret2;
+
+	if (!ret) {
+		/*
+		 * After INIT_DONE is detected, it still needs to check if the
+		 * Nios firmware reports any error during the retimer
+		 * configuration.
+		 */
+		if (IS_MODE_STATUS_OK(state_a) && IS_MODE_STATUS_OK(state_b))
+			return 0;
+
+		/*
+		 * If the retimer configuration is failed, the Nios firmware
+		 * will still release the spi controller for host to
+		 * communicate with the BMC. It makes possible for people to
+		 * reprogram a new Nios firmware and restore the card. So the
+		 * driver doesn't error out, it continues to create the spi
+		 * controller device and spi_board_info for BMC.
+		 */
+		dev_err(dev, "NIOS_INIT_DONE OK, but err on retimer init\n");
+	}
+
+	dev_err(nn->dev, "PKVL_A_MODE_STS 0x%x\n", state_a);
+	dev_err(nn->dev, "PKVL_B_MODE_STS 0x%x\n", state_b);
+
+	return ret;
+}
+
+static struct spi_board_info m10_n3000_info = {
+	.modalias = "m10-n3000",
+	.max_speed_hz = 12500000,
+	.bus_num = 0,
+	.chip_select = 0,
+};
+
+static int create_altera_spi_controller(struct n3000_nios *nn)
+{
+	struct altera_spi_platform_data pdata = { 0 };
+	struct platform_device_info pdevinfo = { 0 };
+	void __iomem *base = nn->base;
+	u64 v;
+
+	v = readq(base + N3000_NS_PARAM);
+
+	pdata.mode_bits = SPI_CS_HIGH;
+	if (FIELD_GET(N3000_NS_PARAM_CLK_POL, v))
+		pdata.mode_bits |= SPI_CPOL;
+	if (FIELD_GET(N3000_NS_PARAM_CLK_PHASE, v))
+		pdata.mode_bits |= SPI_CPHA;
+
+	pdata.num_chipselect = FIELD_GET(N3000_NS_PARAM_NUM_CS, v);
+	pdata.bits_per_word_mask =
+		SPI_BPW_RANGE_MASK(1, FIELD_GET(N3000_NS_PARAM_DATA_WIDTH, v));
+
+	pdata.num_devices = 1;
+	pdata.devices = &m10_n3000_info;
+
+	dev_dbg(nn->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
+		pdata.num_chipselect, pdata.bits_per_word_mask,
+		pdata.mode_bits);
+
+	pdevinfo.name = "subdev_spi_altera";
+	pdevinfo.id = PLATFORM_DEVID_AUTO;
+	pdevinfo.parent = nn->dev;
+	pdevinfo.data = &pdata;
+	pdevinfo.size_data = sizeof(pdata);
+
+	nn->altera_spi = platform_device_register_full(&pdevinfo);
+	return PTR_ERR_OR_ZERO(nn->altera_spi);
+}
+
+static void destroy_altera_spi_controller(struct n3000_nios *nn)
+{
+	platform_device_unregister(nn->altera_spi);
+}
+
+static int n3000_nios_poll_stat_timeout(void __iomem *base, u64 *v)
+{
+	int loops;
+
+	/*
+	 * We don't use the time based timeout here for performance.
+	 *
+	 * The regbus read/write is on the critical path of Intel PAC N3000
+	 * image programing. The time based timeout checking will add too much
+	 * overhead on it. Usually the state changes in 1 or 2 loops on the
+	 * test server, and we set 10000 times loop here for safety.
+	 */
+	for (loops = N3000_NIOS_REGBUS_RETRY_COUNT; loops > 0 ; loops--) {
+		*v = readq(base + N3000_NS_STAT);
+		if (*v & N3000_NS_STAT_RW_VAL)
+			break;
+		cpu_relax();
+	}
+
+	return (loops > 0) ? 0 : -ETIMEDOUT;
+}
+
+static int n3000_nios_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct n3000_nios *nn = context;
+	u64 v;
+	int ret;
+
+	v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_WR) |
+	    FIELD_PREP(N3000_NS_CTRL_ADDR, reg) |
+	    FIELD_PREP(N3000_NS_CTRL_WR_DATA, val);
+	writeq(v, nn->base + N3000_NS_CTRL);
+
+	ret = n3000_nios_poll_stat_timeout(nn->base, &v);
+	if (ret)
+		dev_err(nn->dev, "fail to write reg 0x%x val 0x%x: %d\n",
+			reg, val, ret);
+
+	return ret;
+}
+
+static int n3000_nios_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct n3000_nios *nn = context;
+	u64 v;
+	int ret;
+
+	v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_RD) |
+	    FIELD_PREP(N3000_NS_CTRL_ADDR, reg);
+	writeq(v, nn->base + N3000_NS_CTRL);
+
+	ret = n3000_nios_poll_stat_timeout(nn->base, &v);
+	if (ret)
+		dev_err(nn->dev, "fail to read reg 0x%x: %d\n", reg, ret);
+	else
+		*val = FIELD_GET(N3000_NS_STAT_RD_DATA, v);
+
+	return ret;
+}
+
+static const struct regmap_config n3000_nios_regbus_cfg = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+
+	.reg_write = n3000_nios_reg_write,
+	.reg_read = n3000_nios_reg_read,
+};
+
+static int n3000_nios_probe(struct dfl_device *ddev)
+{
+	struct device *dev = &ddev->dev;
+	struct n3000_nios *nn;
+	int ret;
+
+	nn = devm_kzalloc(dev, sizeof(*nn), GFP_KERNEL);
+	if (!nn)
+		return -ENOMEM;
+
+	dev_set_drvdata(&ddev->dev, nn);
+
+	nn->dev = dev;
+
+	nn->base = devm_ioremap_resource(&ddev->dev, &ddev->mmio_res);
+	if (IS_ERR(nn->base))
+		return PTR_ERR(nn->base);
+
+	nn->regmap = devm_regmap_init(dev, NULL, nn, &n3000_nios_regbus_cfg);
+	if (IS_ERR(nn->regmap))
+		return PTR_ERR(nn->regmap);
+
+	ret = n3000_nios_init_done_check(nn);
+	if (ret)
+		return ret;
+
+	ret = create_altera_spi_controller(nn);
+	if (ret)
+		dev_err(dev, "altera spi controller create failed: %d\n", ret);
+
+	return ret;
+}
+
+static void n3000_nios_remove(struct dfl_device *ddev)
+{
+	struct n3000_nios *nn = dev_get_drvdata(&ddev->dev);
+
+	destroy_altera_spi_controller(nn);
+}
+
+#define FME_FEATURE_ID_N3000_NIOS	0xd
+
+static const struct dfl_device_id n3000_nios_ids[] = {
+	{ FME_ID, FME_FEATURE_ID_N3000_NIOS },
+	{ }
+};
+MODULE_DEVICE_TABLE(dfl, n3000_nios_ids);
+
+static struct dfl_driver n3000_nios_driver = {
+	.drv	= {
+		.name       = "dfl-n3000-nios",
+		.dev_groups = n3000_nios_groups,
+	},
+	.id_table = n3000_nios_ids,
+	.probe   = n3000_nios_probe,
+	.remove  = n3000_nios_remove,
+};
+
+module_dfl_driver(n3000_nios_driver);
+
+MODULE_DESCRIPTION("Driver for Nios private feature on Intel PAC N3000");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
index a2203d03c9e2..04e47e266f26 100644
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -27,6 +27,14 @@
 #define DRV_VERSION	"0.8"
 #define DRV_NAME	"dfl-pci"
 
+#define PCI_VSEC_ID_INTEL_DFLS 0x43
+
+#define PCI_VNDR_DFLS_CNT 0x8
+#define PCI_VNDR_DFLS_RES 0xc
+
+#define PCI_VNDR_DFLS_RES_BAR_MASK GENMASK(2, 0)
+#define PCI_VNDR_DFLS_RES_OFF_MASK GENMASK(31, 3)
+
 struct cci_drvdata {
 	struct dfl_fpga_cdev *cdev;	/* container device */
 };
@@ -119,49 +127,94 @@ static int *cci_pci_create_irq_table(struct pci_dev *pcidev, unsigned int nvec)
 	return table;
 }
 
-/* enumerate feature devices under pci device */
-static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
+static int find_dfls_by_vsec(struct pci_dev *pcidev, struct dfl_fpga_enum_info *info)
 {
-	struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
-	int port_num, bar, i, nvec, ret = 0;
-	struct dfl_fpga_enum_info *info;
-	struct dfl_fpga_cdev *cdev;
+	u32 bir, offset, vndr_hdr, dfl_cnt, dfl_res;
+	int dfl_res_off, i, bars, voff = 0;
 	resource_size_t start, len;
-	void __iomem *base;
-	int *irq_table;
-	u32 offset;
-	u64 v;
 
-	/* allocate enumeration info via pci_dev */
-	info = dfl_fpga_enum_info_alloc(&pcidev->dev);
-	if (!info)
-		return -ENOMEM;
+	while ((voff = pci_find_next_ext_capability(pcidev, voff, PCI_EXT_CAP_ID_VNDR))) {
+		vndr_hdr = 0;
+		pci_read_config_dword(pcidev, voff + PCI_VNDR_HEADER, &vndr_hdr);
 
-	/* add irq info for enumeration if the device support irq */
-	nvec = cci_pci_alloc_irq(pcidev);
-	if (nvec < 0) {
-		dev_err(&pcidev->dev, "Fail to alloc irq %d.\n", nvec);
-		ret = nvec;
-		goto enum_info_free_exit;
-	} else if (nvec) {
-		irq_table = cci_pci_create_irq_table(pcidev, nvec);
-		if (!irq_table) {
-			ret = -ENOMEM;
-			goto irq_free_exit;
+		if (PCI_VNDR_HEADER_ID(vndr_hdr) == PCI_VSEC_ID_INTEL_DFLS &&
+		    pcidev->vendor == PCI_VENDOR_ID_INTEL)
+			break;
+	}
+
+	if (!voff) {
+		dev_dbg(&pcidev->dev, "%s no DFL VSEC found\n", __func__);
+		return -ENODEV;
+	}
+
+	dfl_cnt = 0;
+	pci_read_config_dword(pcidev, voff + PCI_VNDR_DFLS_CNT, &dfl_cnt);
+	if (dfl_cnt > PCI_STD_NUM_BARS) {
+		dev_err(&pcidev->dev, "%s too many DFLs %d > %d\n",
+			__func__, dfl_cnt, PCI_STD_NUM_BARS);
+		return -EINVAL;
+	}
+
+	dfl_res_off = voff + PCI_VNDR_DFLS_RES;
+	if (dfl_res_off + (dfl_cnt * sizeof(u32)) > PCI_CFG_SPACE_EXP_SIZE) {
+		dev_err(&pcidev->dev, "%s DFL VSEC too big for PCIe config space\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	for (i = 0, bars = 0; i < dfl_cnt; i++, dfl_res_off += sizeof(u32)) {
+		dfl_res = GENMASK(31, 0);
+		pci_read_config_dword(pcidev, dfl_res_off, &dfl_res);
+
+		bir = dfl_res & PCI_VNDR_DFLS_RES_BAR_MASK;
+		if (bir >= PCI_STD_NUM_BARS) {
+			dev_err(&pcidev->dev, "%s bad bir number %d\n",
+				__func__, bir);
+			return -EINVAL;
 		}
 
-		ret = dfl_fpga_enum_info_add_irq(info, nvec, irq_table);
-		kfree(irq_table);
-		if (ret)
-			goto irq_free_exit;
+		if (bars & BIT(bir)) {
+			dev_err(&pcidev->dev, "%s DFL for BAR %d already specified\n",
+				__func__, bir);
+			return -EINVAL;
+		}
+
+		bars |= BIT(bir);
+
+		len = pci_resource_len(pcidev, bir);
+		offset = dfl_res & PCI_VNDR_DFLS_RES_OFF_MASK;
+		if (offset >= len) {
+			dev_err(&pcidev->dev, "%s bad offset %u >= %pa\n",
+				__func__, offset, &len);
+			return -EINVAL;
+		}
+
+		dev_dbg(&pcidev->dev, "%s BAR %d offset 0x%x\n", __func__, bir, offset);
+
+		len -= offset;
+
+		start = pci_resource_start(pcidev, bir) + offset;
+
+		dfl_fpga_enum_info_add_dfl(info, start, len);
 	}
 
-	/* start to find Device Feature List in Bar 0 */
+	return 0;
+}
+
+/* default method of finding dfls starting at offset 0 of bar 0 */
+static int find_dfls_by_default(struct pci_dev *pcidev,
+				struct dfl_fpga_enum_info *info)
+{
+	int port_num, bar, i, ret = 0;
+	resource_size_t start, len;
+	void __iomem *base;
+	u32 offset;
+	u64 v;
+
+	/* start to find Device Feature List from Bar 0 */
 	base = cci_pci_ioremap_bar0(pcidev);
-	if (!base) {
-		ret = -ENOMEM;
-		goto irq_free_exit;
-	}
+	if (!base)
+		return -ENOMEM;
 
 	/*
 	 * PF device has FME and Ports/AFUs, and VF device only has one
@@ -208,12 +261,54 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
 		dfl_fpga_enum_info_add_dfl(info, start, len);
 	} else {
 		ret = -ENODEV;
-		goto irq_free_exit;
 	}
 
 	/* release I/O mappings for next step enumeration */
 	pcim_iounmap_regions(pcidev, BIT(0));
 
+	return ret;
+}
+
+/* enumerate feature devices under pci device */
+static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
+{
+	struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
+	struct dfl_fpga_enum_info *info;
+	struct dfl_fpga_cdev *cdev;
+	int nvec, ret = 0;
+	int *irq_table;
+
+	/* allocate enumeration info via pci_dev */
+	info = dfl_fpga_enum_info_alloc(&pcidev->dev);
+	if (!info)
+		return -ENOMEM;
+
+	/* add irq info for enumeration if the device support irq */
+	nvec = cci_pci_alloc_irq(pcidev);
+	if (nvec < 0) {
+		dev_err(&pcidev->dev, "Fail to alloc irq %d.\n", nvec);
+		ret = nvec;
+		goto enum_info_free_exit;
+	} else if (nvec) {
+		irq_table = cci_pci_create_irq_table(pcidev, nvec);
+		if (!irq_table) {
+			ret = -ENOMEM;
+			goto irq_free_exit;
+		}
+
+		ret = dfl_fpga_enum_info_add_irq(info, nvec, irq_table);
+		kfree(irq_table);
+		if (ret)
+			goto irq_free_exit;
+	}
+
+	ret = find_dfls_by_vsec(pcidev, info);
+	if (ret == -ENODEV)
+		ret = find_dfls_by_default(pcidev, info);
+
+	if (ret)
+		goto irq_free_exit;
+
 	/* start enumeration with prepared enumeration information */
 	cdev = dfl_fpga_feature_devs_enumerate(info);
 	if (IS_ERR(cdev)) {
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index b450870b75ed..511b20ff35a3 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -10,6 +10,7 @@
  *   Wu Hao <hao.wu@intel.com>
  *   Xiao Guangrong <guangrong.xiao@linux.intel.com>
  */
+#include <linux/dfl.h>
 #include <linux/fpga-dfl.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
@@ -298,8 +299,7 @@ static int dfl_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct dfl_device *ddev = to_dfl_dev(dev);
 
-	/* The type has 4 valid bits and feature_id has 12 valid bits */
-	return add_uevent_var(env, "MODALIAS=dfl:t%01Xf%03X",
+	return add_uevent_var(env, "MODALIAS=dfl:t%04Xf%04X",
 			      ddev->type, ddev->feature_id);
 }
 
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index 5dc758f655b7..2b82c96ba56c 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/iopoll.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/uuid.h>
@@ -516,88 +517,4 @@ long dfl_feature_ioctl_set_irq(struct platform_device *pdev,
 			       struct dfl_feature *feature,
 			       unsigned long arg);
 
-/**
- * enum dfl_id_type - define the DFL FIU types
- */
-enum dfl_id_type {
-	FME_ID,
-	PORT_ID,
-	DFL_ID_MAX,
-};
-
-/**
- * struct dfl_device_id -  dfl device identifier
- * @type: contains 4 bits DFL FIU type of the device. See enum dfl_id_type.
- * @feature_id: contains 12 bits feature identifier local to its DFL FIU type.
- * @driver_data: driver specific data.
- */
-struct dfl_device_id {
-	u8 type;
-	u16 feature_id;
-	unsigned long driver_data;
-};
-
-/**
- * struct dfl_device - represent an dfl device on dfl bus
- *
- * @dev: generic device interface.
- * @id: id of the dfl device.
- * @type: type of DFL FIU of the device. See enum dfl_id_type.
- * @feature_id: 16 bits feature identifier local to its DFL FIU type.
- * @mmio_res: mmio resource of this dfl device.
- * @irqs: list of Linux IRQ numbers of this dfl device.
- * @num_irqs: number of IRQs supported by this dfl device.
- * @cdev: pointer to DFL FPGA container device this dfl device belongs to.
- * @id_entry: matched id entry in dfl driver's id table.
- */
-struct dfl_device {
-	struct device dev;
-	int id;
-	u8 type;
-	u16 feature_id;
-	struct resource mmio_res;
-	int *irqs;
-	unsigned int num_irqs;
-	struct dfl_fpga_cdev *cdev;
-	const struct dfl_device_id *id_entry;
-};
-
-/**
- * struct dfl_driver - represent an dfl device driver
- *
- * @drv: driver model structure.
- * @id_table: pointer to table of device IDs the driver is interested in.
- *	      { } member terminated.
- * @probe: mandatory callback for device binding.
- * @remove: callback for device unbinding.
- */
-struct dfl_driver {
-	struct device_driver drv;
-	const struct dfl_device_id *id_table;
-
-	int (*probe)(struct dfl_device *dfl_dev);
-	void (*remove)(struct dfl_device *dfl_dev);
-};
-
-#define to_dfl_dev(d) container_of(d, struct dfl_device, dev)
-#define to_dfl_drv(d) container_of(d, struct dfl_driver, drv)
-
-/*
- * use a macro to avoid include chaining to get THIS_MODULE.
- */
-#define dfl_driver_register(drv) \
-	__dfl_driver_register(drv, THIS_MODULE)
-int __dfl_driver_register(struct dfl_driver *dfl_drv, struct module *owner);
-void dfl_driver_unregister(struct dfl_driver *dfl_drv);
-
-/*
- * module_dfl_driver() - Helper macro for drivers that don't do
- * anything special in module init/exit.  This eliminates a lot of
- * boilerplate.  Each module may only use this macro once, and
- * calling it replaces module_init() and module_exit().
- */
-#define module_dfl_driver(__dfl_driver) \
-	module_driver(__dfl_driver, dfl_driver_register, \
-		      dfl_driver_unregister)
-
 #endif /* __FPGA_DFL_H */
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
index 2deccacc3aa7..e9266b2a357f 100644
--- a/drivers/fpga/fpga-bridge.c
+++ b/drivers/fpga/fpga-bridge.c
@@ -17,7 +17,7 @@ static DEFINE_IDA(fpga_bridge_ida);
 static struct class *fpga_bridge_class;
 
 /* Lock for adding/removing bridges to linked lists*/
-static spinlock_t bridge_list_lock;
+static DEFINE_SPINLOCK(bridge_list_lock);
 
 /**
  * fpga_bridge_enable - Enable transactions on the bridge
@@ -479,8 +479,6 @@ static void fpga_bridge_dev_release(struct device *dev)
 
 static int __init fpga_bridge_dev_init(void)
 {
-	spin_lock_init(&bridge_list_lock);
-
 	fpga_bridge_class = class_create(THIS_MODULE, "fpga_bridge");
 	if (IS_ERR(fpga_bridge_class))
 		return PTR_ERR(fpga_bridge_class);