Merge tag 'asoc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v5.4

Quite a big update this time around, particularly in the core
where we've had a lot of cleanups from Morimoto-san - there's
not much functional change but quite a bit of modernization
going on.  We've also seen a lot of driver work, a lot of it
cleanups but also some particular drivers.

 - Lots and lots of cleanups from Morimoto-san and Yue Haibing.
 - Lots of cleanups and enhancements to the Freescale, sunxi dnd
   Intel rivers.
 - Initial Sound Open Firmware suppot for i.MX8.
 - Removal of w90x900 and nuc900 drivers as the platforms are
   being removed.
 - New support for Cirrus Logic CS47L15 and CS47L92, Freescale
   i.MX 7ULP and 8MQ, Meson G12A and NXP UDA1334

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c
index ece6e136437b..6e2dbd03f9bf 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubbub.c
@@ -337,6 +337,7 @@ static enum dcn_hubbub_page_table_block_size page_table_block_size_to_hw(unsigne
 		break;
 	default:
 		ASSERT(false);
+		block_size = page_table_block_size;
 		break;
 	}
 
@@ -366,25 +367,24 @@ int hubbub2_init_dchub_sys_ctx(struct hubbub *hubbub,
 	struct dcn_vmid_page_table_config phys_config;
 
 	REG_SET(DCN_VM_FB_LOCATION_BASE, 0,
-			FB_BASE, pa_config->system_aperture.fb_base);
+			FB_BASE, pa_config->system_aperture.fb_base >> 24);
 	REG_SET(DCN_VM_FB_LOCATION_TOP, 0,
-			FB_TOP, pa_config->system_aperture.fb_top);
+			FB_TOP, pa_config->system_aperture.fb_top >> 24);
 	REG_SET(DCN_VM_FB_OFFSET, 0,
-			FB_OFFSET, pa_config->system_aperture.fb_offset);
+			FB_OFFSET, pa_config->system_aperture.fb_offset >> 24);
 	REG_SET(DCN_VM_AGP_BOT, 0,
-			AGP_BOT, pa_config->system_aperture.agp_bot);
+			AGP_BOT, pa_config->system_aperture.agp_bot >> 24);
 	REG_SET(DCN_VM_AGP_TOP, 0,
-			AGP_TOP, pa_config->system_aperture.agp_top);
+			AGP_TOP, pa_config->system_aperture.agp_top >> 24);
 	REG_SET(DCN_VM_AGP_BASE, 0,
-			AGP_BASE, pa_config->system_aperture.agp_base);
+			AGP_BASE, pa_config->system_aperture.agp_base >> 24);
 
 	if (pa_config->gart_config.page_table_start_addr != pa_config->gart_config.page_table_end_addr) {
-		phys_config.depth = 1;
-		phys_config.block_size = 4096;
 		phys_config.page_table_start_addr = pa_config->gart_config.page_table_start_addr >> 12;
 		phys_config.page_table_end_addr = pa_config->gart_config.page_table_end_addr >> 12;
 		phys_config.page_table_base_addr = pa_config->gart_config.page_table_base_addr;
-
+		phys_config.depth = 0;
+		phys_config.block_size = 0;
 		// Init VMID 0 based on PA config
 		dcn20_vmid_setup(&hubbub1->vmid[0], &phys_config);
 	}