diff options
| author | Guenter Roeck <linux@roeck-us.net> | 2022-01-06 22:48:52 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-02-01 19:27:08 +0300 |
| commit | 72edb228b420efa70ced62593ca05b92c6496b2c (patch) | |
| tree | ed4e76d15e49da5892cff27cb3d1d7e3b1a8ab1c /drivers/hwmon | |
| parent | dee686cbfdd13ca022f20be344a14f595a93f303 (diff) | |
| download | linux-72edb228b420efa70ced62593ca05b92c6496b2c.tar.xz | |
hwmon: (lm90) Reduce maximum conversion rate for G781
[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ]
According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.
Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/lm90.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index d435954782ed..12a8af36c201 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -373,7 +373,7 @@ static const struct lm90_params lm90_params[] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT, .alert_alarms = 0x7c, - .max_convrate = 8, + .max_convrate = 7, }, [lm86] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT |