Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.6 cycle

New device support

* ad7091r5 ADC
  - New driver with follow up patch adding scale and vref support.
  - DT bindings
* ad7923
  - Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
  - Support the BMA254 accelerometer. Required fairly substantial rework
    to allow for small differences between this an existing parts.
* bma400 accelerometer
  - New driver with follow up patch for regulator support.
  - DT bindings.
* asc dlhl60d
  - New driver support this range of pressure and temperature sensors.
  - DT bindings.
* ltc2496 ADC
  - New driver to support this ADC.
  - Split the existing LTC2497 driver generic component out and reuse.
  - DT bindings.
* parallax ping
  - New driver supporting ultrasonic and laser tof distance sensors.
  - Bindings for these sensors.

New features

* core
  - New char type for read_raw returns, used for thermocouple types.
  - Rename read_first_n callback to read.   The reasons behind the original
    naming are lost to the mists of time.
* ad799x
  - Allow pm_ops to disable device completely allowing regulator power down.
* bma180
  - Enable basic regulator support.
* dmaengine buffer
  - Report platform data alignment requirements via new ABI.
* max31856
  - Add option to set mains filter rejection frequency and document
    new in_temp_filter_notch_center_frequency ABI.
  - Add support for configuring HW averaging (oversampling ratio)
  - Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
  - Add read only access to thermocouple type using new ABI, includes
    adding more specific compatibles to reflect which variant of the
    chip is being used.
* mpu6050
  - Provide option to support the PMU9150 in package magnetometer directly
    rather than via auxiliary bus.
* stm32_adc
  - Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
  - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
    allow this.

Cleanups and minor fixes

* Subsystem wide
  - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
  - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
  - Convert to GPIO descriptors.
* ad7303
  - Avoid a dance with checking if the regulator is supplied by just
    using the optional request interface.
* ad7887
  - Simplify channel specification assignment to enable adding more devices.
* ad7923
  - Drop some unused and largely pointless defines of BOB_N==N variety.
  - Tidy up checkpatch warnings.
  - Add missing of_device_id table.
* adf4350
  - Convert to GPIO descriptors.
* ak8975
  - Convert to GPIO descriptors.
* ADIS library and drivers
  - Expand scope of txrx_lock to cover all state and rename as state_lock
  - Add unlocked read / write to allow grouping of consecutive calls under
    single lock / unlock.
  - Add unlocked check_status, reset to allow grouping under single
    lock / unlock.
  - Remove remaining uses of core mlock for local state protection.
    mlock should never be used directly as it protects tightly defined
    core IIO device management state.
* adis16240
  - Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
  - Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
  - Use local dev variable to tidy up code.
  - Use c99 style explicity .member assignment to make driver more readable.
* bmp280
  - Drop ACPI support. No evidence this was used and appropriate ID is not
    registered.
  - Allow ACPI to bind device via PRP0001
* dmaengine buffer
  - Use dma_request_chan instead of dma_request_slave_channel_reason as that
    ABI is going away.
  - Add module info to avoid tainting the kernel.
* hts221
  - Avoid magic number defines when only used to fill structure elements
    that are self describing.
* lm3533
  - Drop a stray semicolon.
* max9611
  - Cleanup enum handling to be more resilient to future changes.
* mpu6050
  - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
  - Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
  - Drop an unnecessary register update.
* ssp_sensors
  - Convert to GPIO descriptors.
* st_sensors
  - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
    anyway.
  - Make default platform data structures __maybe_unsued.
  - Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
  - white space fixes.
  - Mark some constants that aren't always used as __maybe_unused.
  - Drop of ID table guards as they just pervent use under ACPI.
  - Switch to device properties to allow ACPI usage.
* st_uvis25
  - Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
  - Drop legacy platform data as no one seems to be using it.
  - Use the device property API instead of OF specific.
* ti-ads7950
  - typo fix in error message.

* tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits)
  iio: accel: bma180: BMA254 support
  iio: pressure: bmp280: Allow device to be enumerated from ACPI
  iio: pressure: bmp280: Drop ACPI support
  dt-bindings: iio: adc: convert sd modulator to json-schema
  iio: buffer: rename 'read_first_n' callback to 'read'
  iio: buffer-dmaengine: Report buffer length requirements
  bindings: iio: pressure: Add documentation for dlh driver
  dt-bindings: Add asc vendor
  iio: pressure: Add driver for DLH pressure sensors
  iio: buffer-dmaengine: Add module information
  iio: accel: bma180: Use explicit member assignment
  iio: accel: bma180: Basic regulator support
  iio: accel: bma180: Add dev helper variable
  iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  iio: light: remove unneeded semicolon
  ...

1 files changed, 50 insertions, 44 deletions

diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index e14c8536fd09..9ba4a7c8e7ad 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -26,7 +26,14 @@
 #define ADIS_MSC_CTRL_DATA_RDY_DIO2	BIT(0)
 #define ADIS_GLOB_CMD_SW_RESET		BIT(7)
 
-int adis_write_reg(struct adis *adis, unsigned int reg,
+/**
+ * __adis_write_reg() - write N bytes to register (unlocked version)
+ * @adis: The adis device
+ * @reg: The address of the lower of the two registers
+ * @value: The value to write to device (up to 4 bytes)
+ * @size: The size of the @value (in bytes)
+ */
+int __adis_write_reg(struct adis *adis, unsigned int reg,
 	unsigned int value, unsigned int size)
 {
 	unsigned int page = reg / ADIS_PAGE_SIZE;
@@ -70,8 +77,6 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
 		},
 	};
 
-	mutex_lock(&adis->txrx_lock);
-
 	spi_message_init(&msg);
 
 	if (adis->current_page != page) {
@@ -96,8 +101,7 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
 		adis->tx[3] = value & 0xff;
 		break;
 	default:
-		ret = -EINVAL;
-		goto out_unlock;
+		return -EINVAL;
 	}
 
 	xfers[size].cs_change = 0;
@@ -113,20 +117,18 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
 		adis->current_page = page;
 	}
 
-out_unlock:
-	mutex_unlock(&adis->txrx_lock);
-
 	return ret;
 }
-EXPORT_SYMBOL_GPL(adis_write_reg);
+EXPORT_SYMBOL_GPL(__adis_write_reg);
 
 /**
- * adis_read_reg() - read 2 bytes from a 16-bit register
+ * __adis_read_reg() - read N bytes from register (unlocked version)
  * @adis: The adis device
  * @reg: The address of the lower of the two registers
  * @val: The value read back from the device
+ * @size: The size of the @val buffer
  */
-int adis_read_reg(struct adis *adis, unsigned int reg,
+int __adis_read_reg(struct adis *adis, unsigned int reg,
 	unsigned int *val, unsigned int size)
 {
 	unsigned int page = reg / ADIS_PAGE_SIZE;
@@ -166,7 +168,6 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
 		},
 	};
 
-	mutex_lock(&adis->txrx_lock);
 	spi_message_init(&msg);
 
 	if (adis->current_page != page) {
@@ -188,15 +189,14 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
 		spi_message_add_tail(&xfers[3], &msg);
 		break;
 	default:
-		ret = -EINVAL;
-		goto out_unlock;
+		return -EINVAL;
 	}
 
 	ret = spi_sync(adis->spi, &msg);
 	if (ret) {
 		dev_err(&adis->spi->dev, "Failed to read register 0x%02X: %d\n",
 				reg, ret);
-		goto out_unlock;
+		return ret;
 	} else {
 		adis->current_page = page;
 	}
@@ -210,12 +210,9 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
 		break;
 	}
 
-out_unlock:
-	mutex_unlock(&adis->txrx_lock);
-
 	return ret;
 }
-EXPORT_SYMBOL_GPL(adis_read_reg);
+EXPORT_SYMBOL_GPL(__adis_read_reg);
 
 #ifdef CONFIG_DEBUG_FS
 
@@ -253,12 +250,16 @@ int adis_enable_irq(struct adis *adis, bool enable)
 	int ret = 0;
 	uint16_t msc;
 
-	if (adis->data->enable_irq)
-		return adis->data->enable_irq(adis, enable);
+	mutex_lock(&adis->state_lock);
+
+	if (adis->data->enable_irq) {
+		ret = adis->data->enable_irq(adis, enable);
+		goto out_unlock;
+	}
 
-	ret = adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
+	ret = __adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
 	if (ret)
-		goto error_ret;
+		goto out_unlock;
 
 	msc |= ADIS_MSC_CTRL_DATA_RDY_POL_HIGH;
 	msc &= ~ADIS_MSC_CTRL_DATA_RDY_DIO2;
@@ -267,26 +268,27 @@ int adis_enable_irq(struct adis *adis, bool enable)
 	else
 		msc &= ~ADIS_MSC_CTRL_DATA_RDY_EN;
 
-	ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
+	ret = __adis_write_reg_16(adis, adis->data->msc_ctrl_reg, msc);
 
-error_ret:
+out_unlock:
+	mutex_unlock(&adis->state_lock);
 	return ret;
 }
 EXPORT_SYMBOL(adis_enable_irq);
 
 /**
- * adis_check_status() - Check the device for error conditions
+ * __adis_check_status() - Check the device for error conditions (unlocked)
  * @adis: The adis device
  *
  * Returns 0 on success, a negative error code otherwise
  */
-int adis_check_status(struct adis *adis)
+int __adis_check_status(struct adis *adis)
 {
 	uint16_t status;
 	int ret;
 	int i;
 
-	ret = adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
+	ret = __adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
 	if (ret)
 		return ret;
 
@@ -304,32 +306,32 @@ int adis_check_status(struct adis *adis)
 
 	return -EIO;
 }
-EXPORT_SYMBOL_GPL(adis_check_status);
+EXPORT_SYMBOL_GPL(__adis_check_status);
 
 /**
- * adis_reset() - Reset the device
+ * __adis_reset() - Reset the device (unlocked version)
  * @adis: The adis device
  *
  * Returns 0 on success, a negative error code otherwise
  */
-int adis_reset(struct adis *adis)
+int __adis_reset(struct adis *adis)
 {
 	int ret;
 
-	ret = adis_write_reg_8(adis, adis->data->glob_cmd_reg,
+	ret = __adis_write_reg_8(adis, adis->data->glob_cmd_reg,
 			ADIS_GLOB_CMD_SW_RESET);
 	if (ret)
 		dev_err(&adis->spi->dev, "Failed to reset device: %d\n", ret);
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(adis_reset);
+EXPORT_SYMBOL_GPL(__adis_reset);
 
 static int adis_self_test(struct adis *adis)
 {
 	int ret;
 
-	ret = adis_write_reg_16(adis, adis->data->msc_ctrl_reg,
+	ret = __adis_write_reg_16(adis, adis->data->msc_ctrl_reg,
 			adis->data->self_test_mask);
 	if (ret) {
 		dev_err(&adis->spi->dev, "Failed to initiate self test: %d\n",
@@ -339,10 +341,10 @@ static int adis_self_test(struct adis *adis)
 
 	msleep(adis->data->startup_delay);
 
-	ret = adis_check_status(adis);
+	ret = __adis_check_status(adis);
 
 	if (adis->data->self_test_no_autoclear)
-		adis_write_reg_16(adis, adis->data->msc_ctrl_reg, 0x00);
+		__adis_write_reg_16(adis, adis->data->msc_ctrl_reg, 0x00);
 
 	return ret;
 }
@@ -360,19 +362,23 @@ int adis_initial_startup(struct adis *adis)
 {
 	int ret;
 
+	mutex_lock(&adis->state_lock);
+
 	ret = adis_self_test(adis);
 	if (ret) {
 		dev_err(&adis->spi->dev, "Self-test failed, trying reset.\n");
-		adis_reset(adis);
+		__adis_reset(adis);
 		msleep(adis->data->startup_delay);
 		ret = adis_self_test(adis);
 		if (ret) {
 			dev_err(&adis->spi->dev, "Second self-test failed, giving up.\n");
-			return ret;
+			goto out_unlock;
 		}
 	}
 
-	return 0;
+out_unlock:
+	mutex_unlock(&adis->state_lock);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(adis_initial_startup);
 
@@ -398,15 +404,15 @@ int adis_single_conversion(struct iio_dev *indio_dev,
 	unsigned int uval;
 	int ret;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&adis->state_lock);
 
-	ret = adis_read_reg(adis, chan->address, &uval,
+	ret = __adis_read_reg(adis, chan->address, &uval,
 			chan->scan_type.storagebits / 8);
 	if (ret)
 		goto err_unlock;
 
 	if (uval & error_mask) {
-		ret = adis_check_status(adis);
+		ret = __adis_check_status(adis);
 		if (ret)
 			goto err_unlock;
 	}
@@ -418,7 +424,7 @@ int adis_single_conversion(struct iio_dev *indio_dev,
 
 	ret = IIO_VAL_INT;
 err_unlock:
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&adis->state_lock);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(adis_single_conversion);
@@ -438,7 +444,7 @@ EXPORT_SYMBOL_GPL(adis_single_conversion);
 int adis_init(struct adis *adis, struct iio_dev *indio_dev,
 	struct spi_device *spi, const struct adis_data *data)
 {
-	mutex_init(&adis->txrx_lock);
+	mutex_init(&adis->state_lock);
 	adis->spi = spi;
 	adis->data = data;
 	iio_device_set_drvdata(indio_dev, adis);