summaryrefslogtreecommitdiff
path: root/drivers/input/rmi4
diff options
context:
space:
mode:
authorDmitry Torokhov <dmitry.torokhov@gmail.com>2016-07-26 22:07:15 +0300
committerDmitry Torokhov <dmitry.torokhov@gmail.com>2016-07-26 22:07:15 +0300
commit0808882863774ab69066d83f49f511606be024e0 (patch)
treedc5eaab5db6c18e06025356235b0c9ba02bd7a1d /drivers/input/rmi4
parente9003c9cfaa17d26991688268b04244adb67ee2b (diff)
parent0097ff3d5dad1f76c5e1099d849d52509500708c (diff)
downloadlinux-0808882863774ab69066d83f49f511606be024e0.tar.xz
Merge branch 'next' into for-linus
Prepare first round of input updates for 4.8 merge window.
Diffstat (limited to 'drivers/input/rmi4')
-rw-r--r--drivers/input/rmi4/rmi_f01.c22
-rw-r--r--drivers/input/rmi4/rmi_f11.c9
-rw-r--r--drivers/input/rmi4/rmi_f12.c1
-rw-r--r--drivers/input/rmi4/rmi_i2c.c46
4 files changed, 60 insertions, 18 deletions
diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
index eb362bc71a4c..fac81fc9bcf6 100644
--- a/drivers/input/rmi4/rmi_f01.c
+++ b/drivers/input/rmi4/rmi_f01.c
@@ -81,26 +81,26 @@ struct f01_basic_properties {
* This bit disables whatever sleep mode may be selected by the sleep_mode
* field and forces the device to run at full power without sleeping.
*/
-#define RMI_F01_CRTL0_NOSLEEP_BIT BIT(2)
+#define RMI_F01_CTRL0_NOSLEEP_BIT BIT(2)
/*
* When this bit is set, the touch controller employs a noise-filtering
* algorithm designed for use with a connected battery charger.
*/
-#define RMI_F01_CRTL0_CHARGER_BIT BIT(5)
+#define RMI_F01_CTRL0_CHARGER_BIT BIT(5)
/*
* Sets the report rate for the device. The effect of this setting is
* highly product dependent. Check the spec sheet for your particular
* touch sensor.
*/
-#define RMI_F01_CRTL0_REPORTRATE_BIT BIT(6)
+#define RMI_F01_CTRL0_REPORTRATE_BIT BIT(6)
/*
* Written by the host as an indicator that the device has been
* successfully configured.
*/
-#define RMI_F01_CRTL0_CONFIGURED_BIT BIT(7)
+#define RMI_F01_CTRL0_CONFIGURED_BIT BIT(7)
/**
* @ctrl0 - see the bit definitions above.
@@ -330,10 +330,10 @@ static int rmi_f01_probe(struct rmi_function *fn)
case RMI_F01_NOSLEEP_DEFAULT:
break;
case RMI_F01_NOSLEEP_OFF:
- f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT;
break;
case RMI_F01_NOSLEEP_ON:
- f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT;
break;
}
@@ -349,7 +349,7 @@ static int rmi_f01_probe(struct rmi_function *fn)
f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
}
- f01->device_control.ctrl0 |= RMI_F01_CRTL0_CONFIGURED_BIT;
+ f01->device_control.ctrl0 |= RMI_F01_CTRL0_CONFIGURED_BIT;
error = rmi_write(rmi_dev, fn->fd.control_base_addr,
f01->device_control.ctrl0);
@@ -535,8 +535,8 @@ static int rmi_f01_suspend(struct rmi_function *fn)
int error;
f01->old_nosleep =
- f01->device_control.ctrl0 & RMI_F01_CRTL0_NOSLEEP_BIT;
- f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 & RMI_F01_CTRL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT;
f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
if (device_may_wakeup(fn->rmi_dev->xport->dev))
@@ -549,7 +549,7 @@ static int rmi_f01_suspend(struct rmi_function *fn)
if (error) {
dev_err(&fn->dev, "Failed to write sleep mode: %d.\n", error);
if (f01->old_nosleep)
- f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT;
f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL;
return error;
@@ -564,7 +564,7 @@ static int rmi_f01_resume(struct rmi_function *fn)
int error;
if (f01->old_nosleep)
- f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+ f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT;
f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL;
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index ec8a10d53288..20c7134b3d3b 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -530,8 +530,8 @@ static void rmi_f11_rel_pos_report(struct f11_data *f11, u8 n_finger)
struct f11_2d_data *data = &f11->data;
s8 x, y;
- x = data->rel_pos[n_finger * 2];
- y = data->rel_pos[n_finger * 2 + 1];
+ x = data->rel_pos[n_finger * RMI_F11_REL_BYTES];
+ y = data->rel_pos[n_finger * RMI_F11_REL_BYTES + 1];
rmi_2d_sensor_rel_report(sensor, x, y);
}
@@ -1241,7 +1241,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f11_data *f11 = dev_get_drvdata(&fn->dev);
u16 data_base_addr = fn->fd.data_base_addr;
- u16 data_base_addr_offset = 0;
int error;
if (rmi_dev->xport->attn_data) {
@@ -1251,8 +1250,7 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
rmi_dev->xport->attn_size -= f11->sensor.attn_size;
} else {
error = rmi_read_block(rmi_dev,
- data_base_addr + data_base_addr_offset,
- f11->sensor.data_pkt,
+ data_base_addr, f11->sensor.data_pkt,
f11->sensor.pkt_size);
if (error < 0)
return error;
@@ -1260,7 +1258,6 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
drvdata->num_of_irq_regs);
- data_base_addr_offset += f11->sensor.pkt_size;
return 0;
}
diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
index 88e91559c84e..332c02f0b107 100644
--- a/drivers/input/rmi4/rmi_f12.c
+++ b/drivers/input/rmi4/rmi_f12.c
@@ -27,7 +27,6 @@ enum rmi_f12_object_type {
};
struct f12_data {
- struct rmi_function *fn;
struct rmi_2d_sensor sensor;
struct rmi_2d_sensor_platform_data sensor_pdata;
diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
index a96a326b53bd..6f2e0e4f0296 100644
--- a/drivers/input/rmi4/rmi_i2c.c
+++ b/drivers/input/rmi4/rmi_i2c.c
@@ -11,6 +11,8 @@
#include <linux/rmi.h>
#include <linux/irq.h>
#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
#include "rmi_driver.h"
#define BUFFER_SIZE_INCREMENT 32
@@ -37,6 +39,9 @@ struct rmi_i2c_xport {
u8 *tx_buf;
size_t tx_buf_size;
+
+ struct regulator_bulk_data supplies[2];
+ u32 startup_delay;
};
#define RMI_PAGE_SELECT_REGISTER 0xff
@@ -246,6 +251,24 @@ static int rmi_i2c_probe(struct i2c_client *client,
return -ENODEV;
}
+ rmi_i2c->supplies[0].supply = "vdd";
+ rmi_i2c->supplies[1].supply = "vio";
+ retval = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(rmi_i2c->supplies),
+ rmi_i2c->supplies);
+ if (retval < 0)
+ return retval;
+
+ retval = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
+ rmi_i2c->supplies);
+ if (retval < 0)
+ return retval;
+
+ of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms",
+ &rmi_i2c->startup_delay);
+
+ msleep(rmi_i2c->startup_delay);
+
rmi_i2c->client = client;
mutex_init(&rmi_i2c->page_mutex);
@@ -286,6 +309,8 @@ static int rmi_i2c_remove(struct i2c_client *client)
struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
rmi_unregister_transport_device(&rmi_i2c->xport);
+ regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
+ rmi_i2c->supplies);
return 0;
}
@@ -308,6 +333,10 @@ static int rmi_i2c_suspend(struct device *dev)
dev_warn(dev, "Failed to enable irq for wake: %d\n",
ret);
}
+
+ regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
+ rmi_i2c->supplies);
+
return ret;
}
@@ -317,6 +346,13 @@ static int rmi_i2c_resume(struct device *dev)
struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
int ret;
+ ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
+ rmi_i2c->supplies);
+ if (ret)
+ return ret;
+
+ msleep(rmi_i2c->startup_delay);
+
enable_irq(rmi_i2c->irq);
if (device_may_wakeup(&client->dev)) {
ret = disable_irq_wake(rmi_i2c->irq);
@@ -346,6 +382,9 @@ static int rmi_i2c_runtime_suspend(struct device *dev)
disable_irq(rmi_i2c->irq);
+ regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
+ rmi_i2c->supplies);
+
return 0;
}
@@ -355,6 +394,13 @@ static int rmi_i2c_runtime_resume(struct device *dev)
struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
int ret;
+ ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
+ rmi_i2c->supplies);
+ if (ret)
+ return ret;
+
+ msleep(rmi_i2c->startup_delay);
+
enable_irq(rmi_i2c->irq);
ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);