summaryrefslogtreecommitdiff
path: root/drivers/md
diff options
context:
space:
mode:
authorMike Snitzer <snitzer@redhat.com>2020-05-27 23:32:51 +0300
committerMike Snitzer <snitzer@redhat.com>2020-06-05 21:59:56 +0300
commit553ec94cb4b4937b48f81e27de33f71325d1a227 (patch)
treea344fd73d12ab0e6fb78fc270832163d314a76ca /drivers/md
parenta862e4e2154289fc12aa9e70f33614d9c70f3be4 (diff)
downloadlinux-553ec94cb4b4937b48f81e27de33f71325d1a227.tar.xz
dm mpath: restrict queue_if_no_path state machine
Do not allow saving disabled queue_if_no_path if already saved as enabled; implies multiple suspends (which shouldn't ever happen). Log if this unlikely scenario is ever triggered. Also, only write MPATHF_SAVED_QUEUE_IF_NO_PATH during presuspend or if "fail_if_no_path" message. MPATHF_SAVED_QUEUE_IF_NO_PATH is no longer always modified, e.g.: even if queue_if_no_path()'s save_old_value argument wasn't set. This just implies a bit tighter control over the management of MPATHF_SAVED_QUEUE_IF_NO_PATH. Side-effect is multipath_resume() doesn't reset MPATHF_QUEUE_IF_NO_PATH unless MPATHF_SAVED_QUEUE_IF_NO_PATH was set (during presuspend); and at that time the MPATHF_SAVED_QUEUE_IF_NO_PATH bit gets cleared. So MPATHF_SAVED_QUEUE_IF_NO_PATH's use is much more narrow in scope. Last, but not least, do _not_ disable queue_if_no_path during noflush suspend. There is no need/benefit to saving off queue_if_no_path via MPATHF_SAVED_QUEUE_IF_NO_PATH and clearing MPATHF_QUEUE_IF_NO_PATH for noflush suspend -- by avoiding this needless queue_if_no_path flag churn there is less potential for MPATHF_QUEUE_IF_NO_PATH to get lost. Which avoids potential for IOs to be errored back up to userspace during DM multipath's handling of path failures. That said, this last change papers over a reported issue concerning request-based dm-multipath's interaction with blk-mq, relative to suspend and resume: multipath_endio is being called _before_ multipath_resume. This should never happen if DM suspend's blk_mq_quiesce_queue() + dm_wait_for_completion() is genuinely waiting for all inflight blk-mq requests to complete. Similarly: drivers/md/dm.c:__dm_resume() clearly calls dm_table_resume_targets() _before_ dm_start_queue()'s blk_mq_unquiesce_queue() is called. If the queue isn't even restarted until after multipath_resume(); the BIG question that still needs answering is: how can multipath_end_io beat multipath_resume in a race!? Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Diffstat (limited to 'drivers/md')
-rw-r--r--drivers/md/dm-mpath.c38
1 files changed, 28 insertions, 10 deletions
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 4c34d037aa35..bc846cf7b0d8 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -695,12 +695,25 @@ static int queue_if_no_path(struct multipath *m, bool queue_if_no_path,
bool save_old_value)
{
unsigned long flags;
+ bool queue_if_no_path_bit, saved_queue_if_no_path_bit;
spin_lock_irqsave(&m->lock, flags);
- assign_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags,
- (save_old_value && test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) ||
- (!save_old_value && queue_if_no_path));
+
+ queue_if_no_path_bit = test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
+ saved_queue_if_no_path_bit = test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags);
+
+ if (save_old_value) {
+ if (unlikely(!queue_if_no_path_bit && saved_queue_if_no_path_bit)) {
+ DMERR("%s: QIFNP disabled but saved as enabled, saving again loses state, not saving!",
+ dm_device_name(dm_table_get_md(m->ti->table)));
+ } else
+ assign_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags, queue_if_no_path_bit);
+ } else if (!queue_if_no_path && saved_queue_if_no_path_bit) {
+ /* due to "fail_if_no_path" message, need to honor it. */
+ clear_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags);
+ }
assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags, queue_if_no_path);
+
spin_unlock_irqrestore(&m->lock, flags);
if (!queue_if_no_path) {
@@ -1653,16 +1666,19 @@ done:
}
/*
- * Suspend can't complete until all the I/O is processed so if
- * the last path fails we must error any remaining I/O.
- * Note that if the freeze_bdev fails while suspending, the
- * queue_if_no_path state is lost - userspace should reset it.
+ * Suspend with flush can't complete until all the I/O is processed
+ * so if the last path fails we must error any remaining I/O.
+ * - Note that if the freeze_bdev fails while suspending, the
+ * queue_if_no_path state is lost - userspace should reset it.
+ * Otherwise, during noflush suspend, queue_if_no_path will not change.
*/
static void multipath_presuspend(struct dm_target *ti)
{
struct multipath *m = ti->private;
- queue_if_no_path(m, false, true);
+ /* FIXME: bio-based shouldn't need to always disable queue_if_no_path */
+ if (m->queue_mode == DM_TYPE_BIO_BASED || !dm_noflush_suspending(m->ti))
+ queue_if_no_path(m, false, true);
}
static void multipath_postsuspend(struct dm_target *ti)
@@ -1683,8 +1699,10 @@ static void multipath_resume(struct dm_target *ti)
unsigned long flags;
spin_lock_irqsave(&m->lock, flags);
- assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags,
- test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags));
+ if (test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)) {
+ set_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
+ clear_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags);
+ }
spin_unlock_irqrestore(&m->lock, flags);
}