summaryrefslogtreecommitdiff
path: root/drivers/mfd/wm8994-regmap.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-29 00:56:35 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-29 00:56:35 +0400
commit30304e5a79d424eb2c8707b3ff0e9b8bf6ab3e8f (patch)
tree63968fb97b86861e31922515395feef8a110f884 /drivers/mfd/wm8994-regmap.c
parent750f77064a290beb162352077b52c61b04bcae0e (diff)
parentb8589e2a8065b8e7773742b60ae96b63b757bb69 (diff)
downloadlinux-30304e5a79d424eb2c8707b3ff0e9b8bf6ab3e8f.tar.xz
Merge tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups (<linux/device.h> removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ...
Diffstat (limited to 'drivers/mfd/wm8994-regmap.c')
-rw-r--r--drivers/mfd/wm8994-regmap.c20
1 files changed, 2 insertions, 18 deletions
diff --git a/drivers/mfd/wm8994-regmap.c b/drivers/mfd/wm8994-regmap.c
index 7605b6095453..bfd25af6ecb1 100644
--- a/drivers/mfd/wm8994-regmap.c
+++ b/drivers/mfd/wm8994-regmap.c
@@ -20,7 +20,6 @@
#include "wm8994.h"
static struct reg_default wm1811_defaults[] = {
- { 0x0000, 0x1811 }, /* R0 - Software Reset */
{ 0x0001, 0x0000 }, /* R1 - Power Management (1) */
{ 0x0002, 0x6000 }, /* R2 - Power Management (2) */
{ 0x0003, 0x0000 }, /* R3 - Power Management (3) */
@@ -61,7 +60,7 @@ static struct reg_default wm1811_defaults[] = {
{ 0x0036, 0x0000 }, /* R54 - Speaker Mixer */
{ 0x0037, 0x0000 }, /* R55 - Additional Control */
{ 0x0038, 0x0000 }, /* R56 - AntiPOP (1) */
- { 0x0039, 0x0180 }, /* R57 - AntiPOP (2) */
+ { 0x0039, 0x0000 }, /* R57 - AntiPOP (2) */
{ 0x003B, 0x000D }, /* R59 - LDO 1 */
{ 0x003C, 0x0003 }, /* R60 - LDO 2 */
{ 0x003D, 0x0039 }, /* R61 - MICBIAS1 */
@@ -69,16 +68,12 @@ static struct reg_default wm1811_defaults[] = {
{ 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */
{ 0x004D, 0xAB19 }, /* R77 - Charge Pump (2) */
{ 0x0051, 0x0004 }, /* R81 - Class W (1) */
- { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */
{ 0x0055, 0x054A }, /* R85 - DC Servo (2) */
- { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */
{ 0x0059, 0x0000 }, /* R89 - DC Servo (4) */
{ 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */
{ 0x00C5, 0x0000 }, /* R197 - Class D Test (5) */
{ 0x00D0, 0x7600 }, /* R208 - Mic Detect 1 */
{ 0x00D1, 0x007F }, /* R209 - Mic Detect 2 */
- { 0x00D2, 0x0000 }, /* R210 - Mic Detect 3 */
- { 0x0100, 0x0100 }, /* R256 - Chip Revision */
{ 0x0101, 0x8004 }, /* R257 - Control Interface */
{ 0x0200, 0x0000 }, /* R512 - AIF1 Clocking (1) */
{ 0x0201, 0x0000 }, /* R513 - AIF1 Clocking (2) */
@@ -88,7 +83,6 @@ static struct reg_default wm1811_defaults[] = {
{ 0x0209, 0x0000 }, /* R521 - Clocking (2) */
{ 0x0210, 0x0083 }, /* R528 - AIF1 Rate */
{ 0x0211, 0x0083 }, /* R529 - AIF2 Rate */
- { 0x0212, 0x0000 }, /* R530 - Rate Status */
{ 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */
{ 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */
{ 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */
@@ -218,8 +212,6 @@ static struct reg_default wm1811_defaults[] = {
{ 0x070A, 0xA101 }, /* R1802 - GPIO 11 */
{ 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */
{ 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */
- { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */
- { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */
{ 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */
{ 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */
{ 0x0739, 0xDFEF }, /* R1849 - Interrupt Status 2 Mask */
@@ -228,7 +220,6 @@ static struct reg_default wm1811_defaults[] = {
};
static struct reg_default wm8994_defaults[] = {
- { 0x0000, 0x8994 }, /* R0 - Software Reset */
{ 0x0001, 0x0000 }, /* R1 - Power Management (1) */
{ 0x0002, 0x6000 }, /* R2 - Power Management (2) */
{ 0x0003, 0x0000 }, /* R3 - Power Management (3) */
@@ -275,12 +266,9 @@ static struct reg_default wm8994_defaults[] = {
{ 0x003C, 0x0003 }, /* R60 - LDO 2 */
{ 0x004C, 0x1F25 }, /* R76 - Charge Pump (1) */
{ 0x0051, 0x0004 }, /* R81 - Class W (1) */
- { 0x0054, 0x0000 }, /* R84 - DC Servo (1) */
{ 0x0055, 0x054A }, /* R85 - DC Servo (2) */
{ 0x0057, 0x0000 }, /* R87 - DC Servo (4) */
- { 0x0058, 0x0000 }, /* R88 - DC Servo Readback */
{ 0x0060, 0x0000 }, /* R96 - Analogue HP (1) */
- { 0x0100, 0x0003 }, /* R256 - Chip Revision */
{ 0x0101, 0x8004 }, /* R257 - Control Interface */
{ 0x0110, 0x0000 }, /* R272 - Write Sequencer Ctrl (1) */
{ 0x0111, 0x0000 }, /* R273 - Write Sequencer Ctrl (2) */
@@ -292,7 +280,6 @@ static struct reg_default wm8994_defaults[] = {
{ 0x0209, 0x0000 }, /* R521 - Clocking (2) */
{ 0x0210, 0x0083 }, /* R528 - AIF1 Rate */
{ 0x0211, 0x0083 }, /* R529 - AIF2 Rate */
- { 0x0212, 0x0000 }, /* R530 - Rate Status */
{ 0x0220, 0x0000 }, /* R544 - FLL1 Control (1) */
{ 0x0221, 0x0000 }, /* R545 - FLL1 Control (2) */
{ 0x0222, 0x0000 }, /* R546 - FLL1 Control (3) */
@@ -445,9 +432,6 @@ static struct reg_default wm8994_defaults[] = {
{ 0x070A, 0xA101 }, /* R1802 - GPIO 11 */
{ 0x0720, 0x0000 }, /* R1824 - Pull Control (1) */
{ 0x0721, 0x0156 }, /* R1825 - Pull Control (2) */
- { 0x0730, 0x0000 }, /* R1840 - Interrupt Status 1 */
- { 0x0731, 0x0000 }, /* R1841 - Interrupt Status 2 */
- { 0x0732, 0x0000 }, /* R1842 - Interrupt Raw Status 2 */
{ 0x0738, 0x07FF }, /* R1848 - Interrupt Status 1 Mask */
{ 0x0739, 0xFFFF }, /* R1849 - Interrupt Status 2 Mask */
{ 0x0740, 0x0000 }, /* R1856 - Interrupt Control */
@@ -455,7 +439,6 @@ static struct reg_default wm8994_defaults[] = {
};
static struct reg_default wm8958_defaults[] = {
- { 0x0000, 0x8958 }, /* R0 - Software Reset */
{ 0x0001, 0x0000 }, /* R1 - Power Management (1) */
{ 0x0002, 0x6000 }, /* R2 - Power Management (2) */
{ 0x0003, 0x0000 }, /* R3 - Power Management (3) */
@@ -970,6 +953,7 @@ static bool wm8994_readable_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8994_DC_SERVO_READBACK:
+ case WM8994_MICBIAS:
case WM8994_WRITE_SEQUENCER_CTRL_1:
case WM8994_WRITE_SEQUENCER_CTRL_2:
case WM8994_AIF1_ADC2_LEFT_VOLUME: