summaryrefslogtreecommitdiff
path: root/drivers/net/arcnet
diff options
context:
space:
mode:
authorJoe Perches <joe@perches.com>2015-05-05 20:06:08 +0300
committerMichael Grzeschik <m.grzeschik@pengutronix.de>2015-09-23 09:44:26 +0300
commit09dfbcd5d178f8e03b5a29c9f3411687ec388c91 (patch)
treeb4756c07c4d92bd351860bf282c18ce289d7bcca /drivers/net/arcnet
parentf0b9c27c0c933a6545ea57d4edbc56a4db435c84 (diff)
downloadlinux-09dfbcd5d178f8e03b5a29c9f3411687ec388c91.tar.xz
arcnet: com90xx: Use arcnet_<I/O> routines
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Diffstat (limited to 'drivers/net/arcnet')
-rw-r--r--drivers/net/arcnet/com90xx.c67
1 files changed, 33 insertions, 34 deletions
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index b672795acaa7..f1cfeb0e1343 100644
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -79,22 +79,14 @@ static int numcards;
#define MIRROR_SIZE (BUFFER_SIZE * 4)
/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr + 0) /* writable */
-#define _STATUS (ioaddr + 0) /* readable */
-#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
-#define _CONFIG (ioaddr + 2) /* Configuration register */
-#define _RESET (ioaddr + 8) /* software reset (on read) */
-#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
-#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
-#define _ADDR_LO (ioaddr + 14)
-
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ASTATUS() inb(_STATUS)
-#define ACOMMAND(cmd) outb((cmd), _COMMAND)
-#define AINTMASK(msk) outb((msk), _INTMASK)
+#define COM9026_REG_W_INTMASK 0 /* writable */
+#define COM9026_REG_R_STATUS 0 /* readable */
+#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
+#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
+#define COM9026_REG_R_RESET 8 /* software reset (on read) */
+#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
+#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
+#define COM9026_REG_W_ADDR_HI 15
static int com90xx_skip_probe __initdata = 0;
@@ -175,7 +167,7 @@ static void __init com90xx_probe(void)
*port-- = ports[--numports];
continue;
}
- if (ASTATUS() == 0xFF) {
+ if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
arc_cont(D_INIT_REASONS, "(empty)\n");
arc_cont(D_INIT_REASONS, "S1: ");
if (BUGLVL(D_INIT_REASONS))
@@ -184,7 +176,8 @@ static void __init com90xx_probe(void)
*port-- = ports[--numports];
continue;
}
- inb(_RESET); /* begin resetting card */
+ /* begin resetting card */
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
arc_cont(D_INIT_REASONS, "\n");
arc_cont(D_INIT_REASONS, "S1: ");
@@ -324,7 +317,7 @@ static void __init com90xx_probe(void)
arc_cont(D_INIT, "%Xh ", *port);
ioaddr = *port;
- status = ASTATUS();
+ status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if ((status & 0x9D)
!= (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
@@ -336,8 +329,9 @@ static void __init com90xx_probe(void)
*port-- = ports[--numports];
continue;
}
- ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
- status = ASTATUS();
+ arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+ ioaddr, COM9026_REG_W_COMMAND);
+ status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if (status & RESETflag) {
arc_cont(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
status);
@@ -357,9 +351,9 @@ static void __init com90xx_probe(void)
* we tell it to start receiving.
*/
airqmask = probe_irq_on();
- AINTMASK(NORXflag);
+ arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
udelay(1);
- AINTMASK(0);
+ arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
airq = probe_irq_off(airqmask);
if (airq <= 0) {
@@ -386,14 +380,14 @@ static void __init com90xx_probe(void)
*/
#ifdef FAST_PROBE
if (numports > 1 || numshmems > 1) {
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
} else {
/* just one shmem and port, assume they match */
writeb(TESTvalue, iomem[0]);
}
#else
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
#endif
@@ -574,21 +568,21 @@ static void com90xx_command(struct net_device *dev, int cmd)
{
short ioaddr = dev->base_addr;
- ACOMMAND(cmd);
+ arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
}
static int com90xx_status(struct net_device *dev)
{
short ioaddr = dev->base_addr;
- return ASTATUS();
+ return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
}
static void com90xx_setmask(struct net_device *dev, int mask)
{
short ioaddr = dev->base_addr;
- AINTMASK(mask);
+ arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
}
/* Do a hardware reset on the card, and set up necessary registers.
@@ -603,18 +597,23 @@ static int com90xx_reset(struct net_device *dev, int really_reset)
struct arcnet_local *lp = netdev_priv(dev);
short ioaddr = dev->base_addr;
- arc_printk(D_INIT, dev, "Resetting (status=%02Xh)\n", ASTATUS());
+ arc_printk(D_INIT, dev, "Resetting (status=%02Xh)\n",
+ arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
if (really_reset) {
/* reset the card */
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
}
- ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */
- ACOMMAND(CFLAGScmd | CONFIGclear);
+ /* clear flags & end reset */
+ arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
+ arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
+#if 0
/* don't do this until we verify that it doesn't hurt older cards! */
- /* outb(inb(_CONFIG) | ENABLE16flag, _CONFIG); */
+ arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) | ENABLE16flag,
+ ioaddr, COM9026_REG_RW_CONFIG);
+#endif
/* verify that the ARCnet signature byte is present */
if (readb(lp->mem_start) != TESTvalue) {
@@ -623,7 +622,7 @@ static int com90xx_reset(struct net_device *dev, int really_reset)
return 1;
}
/* enable extended (512-byte) packets */
- ACOMMAND(CONFIGcmd | EXTconf);
+ arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
/* clean out all the memory to make debugging make more sense :) */
if (BUGLVL(D_DURING))