diff options
author | Marc Kleine-Budde <mkl@pengutronix.de> | 2021-01-06 00:41:38 +0300 |
---|---|---|
committer | Marc Kleine-Budde <mkl@pengutronix.de> | 2021-01-07 13:02:09 +0300 |
commit | 2fbb397f584077e3c90abd06829f5a1f66fdd5f4 (patch) | |
tree | dd5cb7cb0f2d8156681b2ec3cd92dd61f82e8128 /drivers/net/can/spi | |
parent | 6086f02a18aeae795a61a3fc6566920891ea3b52 (diff) | |
download | linux-2fbb397f584077e3c90abd06829f5a1f66fdd5f4.tar.xz |
can: mcp251xfd: mcp251xfd_handle_rxif_ring(): first increment RX tail pointer in HW, then in driver
The previous patch fixes a TEF vs. TX race condition, by first updating the TEF
tail pointer in hardware, and then updating the driver internal pointer.
The same pattern exists in the RX-path, too. This should be no problem, as the
driver accesses the RX-FIFO from the interrupt handler only, thus the access is
properly serialized. Fix the order here, too, so that the TEF- and RX-path look
similar.
Fixes: 1f652bb6bae7 ("can: mcp25xxfd: rx-path: reduce number of SPI core requests to set UINC bit")
Link: https://lore.kernel.org/r/20210105214138.3150886-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Diffstat (limited to 'drivers/net/can/spi')
-rw-r--r-- | drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index 85a1a8b7c0e7..36235afb0bc6 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -1552,10 +1552,8 @@ mcp251xfd_handle_rxif_ring(struct mcp251xfd_priv *priv, /* Increment the RX FIFO tail pointer 'len' times in a * single SPI message. - */ - ring->tail += len; - - /* Note: + * + * Note: * * "cs_change == 1" on the last transfer results in an * active chip select after the complete SPI @@ -1571,6 +1569,8 @@ mcp251xfd_handle_rxif_ring(struct mcp251xfd_priv *priv, last_xfer->cs_change = 1; if (err) return err; + + ring->tail += len; } return 0; |