can: drivers: fix spelling mistakes

This patch fixes spelling erros found by "codespell" in the
drivers/net/can subtree.

Link: https://lore.kernel.org/r/20200915223527.1417033-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

7 files changed, 11 insertions, 11 deletions

diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index 77fa830fe7dd..bcb331b0c958 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -90,7 +90,7 @@ config CAN_PEAK_USB
 	tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
 	help
 	  This driver supports the PEAK-System Technik USB adapters that enable
-	  access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD
+	  access to the CAN bus, with respect to the CAN 2.0b and/or CAN-FD
 	  standards, that is:
 
 	  PCAN-USB             single CAN 2.0b channel USB adapter
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index a4b4b742c80c..3005157059ca 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -828,7 +828,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 
 	netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */
 
-	/* dev settup */
+	/* dev setup */
 	strcpy(dev->bt_const.name, "gs_usb");
 	dev->bt_const.tseg1_min = bt_const->tseg1_min;
 	dev->bt_const.tseg1_max = bt_const->tseg1_max;
@@ -852,7 +852,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 		dev->tx_context[rc].echo_id = GS_MAX_TX_URBS;
 	}
 
-	/* can settup */
+	/* can setup */
 	dev->can.state = CAN_STATE_STOPPED;
 	dev->can.clock.freq = bt_const->fclk_can;
 	dev->can.bittiming_const = &dev->bt_const;
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 21faa2ec4632..eb6fb7435061 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -28,7 +28,7 @@
 #define MCBA_CTX_FREE MCBA_MAX_TX_URBS
 
 /* RX buffer must be bigger than msg size since at the
- * beggining USB messages are stacked.
+ * beginning USB messages are stacked.
  */
 #define MCBA_USB_RX_BUFF_SIZE 64
 #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 47cc1ff5b88e..ab63fd9eb982 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -35,7 +35,7 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter");
 #define PCAN_UFD_RX_BUFFER_SIZE		2048
 #define PCAN_UFD_TX_BUFFER_SIZE		512
 
-/* read some versions info from the hw devcie */
+/* read some versions info from the hw device */
 struct __packed pcan_ufd_fw_info {
 	__le16	size_of;	/* sizeof this */
 	__le16	type;		/* type of this structure */
@@ -796,7 +796,7 @@ static int pcan_usb_fd_start(struct peak_usb_device *dev)
 	return err;
 }
 
-/* socket callback used to copy berr counters values receieved through USB */
+/* socket callback used to copy berr counters values received through USB */
 static int pcan_usb_fd_get_berr_counter(const struct net_device *netdev,
 					struct can_berr_counter *bec)
 {
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index 1689ab387612..f85b560e05db 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -973,7 +973,7 @@ int pcan_usb_pro_probe(struct usb_interface *intf)
 		struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc;
 
 		/*
-		 * below is the list of valid ep addreses. Any other ep address
+		 * below is the list of valid ep addresses. Any other ep address
 		 * is considered as not-CAN interface address => no dev created
 		 */
 		switch (ep->bEndpointAddress) {
diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c
index 81e942f713e6..dc5290b36598 100644
--- a/drivers/net/can/usb/ucan.c
+++ b/drivers/net/can/usb/ucan.c
@@ -1445,7 +1445,7 @@ static int ucan_probe(struct usb_interface *intf,
 
 	/* request the device information and store it in ctl_msg_buffer
 	 *
-	 * note: ucan_ctrl_command_* wrappers connot be used yet
+	 * note: ucan_ctrl_command_* wrappers cannot be used yet
 	 * because `up` is initialised in Stage 3
 	 */
 	ret = usb_control_msg(udev,
@@ -1494,7 +1494,7 @@ static int ucan_probe(struct usb_interface *intf,
 
 	up = netdev_priv(netdev);
 
-	/* initialze data */
+	/* initialize data */
 	up->udev = udev;
 	up->intf = intf;
 	up->netdev = netdev;
diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c
index 8fa224b28218..62749c67c959 100644
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -88,7 +88,7 @@ enum usb_8dev_cmd {
 
 /* status */
 #define USB_8DEV_STATUSMSG_OK		0x00  /* Normal condition. */
-#define USB_8DEV_STATUSMSG_OVERRUN	0x01  /* Overrun occured when sending */
+#define USB_8DEV_STATUSMSG_OVERRUN	0x01  /* Overrun occurred when sending */
 #define USB_8DEV_STATUSMSG_BUSLIGHT	0x02  /* Error counter has reached 96 */
 #define USB_8DEV_STATUSMSG_BUSHEAVY	0x03  /* Error count. has reached 128 */
 #define USB_8DEV_STATUSMSG_BUSOFF	0x04  /* Device is in BUSOFF */
@@ -165,7 +165,7 @@ struct __packed usb_8dev_rx_msg {
 /* command frame */
 struct __packed usb_8dev_cmd_msg {
 	u8 begin;
-	u8 channel;	/* unkown - always 0 */
+	u8 channel;	/* unknown - always 0 */
 	u8 command;	/* command to execute */
 	u8 opt1;	/* optional parameter / return value */
 	u8 opt2;	/* optional parameter 2 */