net: phy: micrel: move phy reg offsets to common header

Some micrel devices share the same PHY register defines. This patch
moves them to one common header so other drivers can reuse them.
And reuse generic MII_* defines where possible.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 60 insertions, 121 deletions

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index ad509a57a945..ba065003623f 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -15,6 +15,7 @@
 #include <linux/phy.h>
 #include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
+#include <linux/micrel_phy.h>
 #include <net/dsa.h>
 #include <net/switchdev.h>
 
@@ -731,88 +732,88 @@ static void ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
 	u8 p = phy;
 
 	switch (reg) {
-	case PHY_REG_CTRL:
+	case MII_BMCR:
 		ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
 		ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
 		ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
 		if (restart & PORT_PHY_LOOPBACK)
-			data |= PHY_LOOPBACK;
+			data |= BMCR_LOOPBACK;
 		if (ctrl & PORT_FORCE_100_MBIT)
-			data |= PHY_SPEED_100MBIT;
+			data |= BMCR_SPEED100;
 		if (ksz_is_ksz88x3(dev)) {
 			if ((ctrl & PORT_AUTO_NEG_ENABLE))
-				data |= PHY_AUTO_NEG_ENABLE;
+				data |= BMCR_ANENABLE;
 		} else {
 			if (!(ctrl & PORT_AUTO_NEG_DISABLE))
-				data |= PHY_AUTO_NEG_ENABLE;
+				data |= BMCR_ANENABLE;
 		}
 		if (restart & PORT_POWER_DOWN)
-			data |= PHY_POWER_DOWN;
+			data |= BMCR_PDOWN;
 		if (restart & PORT_AUTO_NEG_RESTART)
-			data |= PHY_AUTO_NEG_RESTART;
+			data |= BMCR_ANRESTART;
 		if (ctrl & PORT_FORCE_FULL_DUPLEX)
-			data |= PHY_FULL_DUPLEX;
+			data |= BMCR_FULLDPLX;
 		if (speed & PORT_HP_MDIX)
-			data |= PHY_HP_MDIX;
+			data |= KSZ886X_BMCR_HP_MDIX;
 		if (restart & PORT_FORCE_MDIX)
-			data |= PHY_FORCE_MDIX;
+			data |= KSZ886X_BMCR_FORCE_MDI;
 		if (restart & PORT_AUTO_MDIX_DISABLE)
-			data |= PHY_AUTO_MDIX_DISABLE;
+			data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX;
 		if (restart & PORT_TX_DISABLE)
-			data |= PHY_TRANSMIT_DISABLE;
+			data |= KSZ886X_BMCR_DISABLE_TRANSMIT;
 		if (restart & PORT_LED_OFF)
-			data |= PHY_LED_DISABLE;
+			data |= KSZ886X_BMCR_DISABLE_LED;
 		break;
-	case PHY_REG_STATUS:
+	case MII_BMSR:
 		ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
-		data = PHY_100BTX_FD_CAPABLE |
-		       PHY_100BTX_CAPABLE |
-		       PHY_10BT_FD_CAPABLE |
-		       PHY_10BT_CAPABLE |
-		       PHY_AUTO_NEG_CAPABLE;
+		data = BMSR_100FULL |
+		       BMSR_100HALF |
+		       BMSR_10FULL |
+		       BMSR_10HALF |
+		       BMSR_ANEGCAPABLE;
 		if (link & PORT_AUTO_NEG_COMPLETE)
-			data |= PHY_AUTO_NEG_ACKNOWLEDGE;
+			data |= BMSR_ANEGCOMPLETE;
 		if (link & PORT_STAT_LINK_GOOD)
-			data |= PHY_LINK_STATUS;
+			data |= BMSR_LSTATUS;
 		break;
-	case PHY_REG_ID_1:
+	case MII_PHYSID1:
 		data = KSZ8795_ID_HI;
 		break;
-	case PHY_REG_ID_2:
+	case MII_PHYSID2:
 		if (ksz_is_ksz88x3(dev))
 			data = KSZ8863_ID_LO;
 		else
 			data = KSZ8795_ID_LO;
 		break;
-	case PHY_REG_AUTO_NEGOTIATION:
+	case MII_ADVERTISE:
 		ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
-		data = PHY_AUTO_NEG_802_3;
+		data = ADVERTISE_CSMA;
 		if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
-			data |= PHY_AUTO_NEG_SYM_PAUSE;
+			data |= ADVERTISE_PAUSE_CAP;
 		if (ctrl & PORT_AUTO_NEG_100BTX_FD)
-			data |= PHY_AUTO_NEG_100BTX_FD;
+			data |= ADVERTISE_100FULL;
 		if (ctrl & PORT_AUTO_NEG_100BTX)
-			data |= PHY_AUTO_NEG_100BTX;
+			data |= ADVERTISE_100HALF;
 		if (ctrl & PORT_AUTO_NEG_10BT_FD)
-			data |= PHY_AUTO_NEG_10BT_FD;
+			data |= ADVERTISE_10FULL;
 		if (ctrl & PORT_AUTO_NEG_10BT)
-			data |= PHY_AUTO_NEG_10BT;
+			data |= ADVERTISE_10HALF;
 		break;
-	case PHY_REG_REMOTE_CAPABILITY:
+	case MII_LPA:
 		ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link);
-		data = PHY_AUTO_NEG_802_3;
+		data = LPA_SLCT;
 		if (link & PORT_REMOTE_SYM_PAUSE)
-			data |= PHY_AUTO_NEG_SYM_PAUSE;
+			data |= LPA_PAUSE_CAP;
 		if (link & PORT_REMOTE_100BTX_FD)
-			data |= PHY_AUTO_NEG_100BTX_FD;
+			data |= LPA_100FULL;
 		if (link & PORT_REMOTE_100BTX)
-			data |= PHY_AUTO_NEG_100BTX;
+			data |= LPA_100HALF;
 		if (link & PORT_REMOTE_10BT_FD)
-			data |= PHY_AUTO_NEG_10BT_FD;
+			data |= LPA_10FULL;
 		if (link & PORT_REMOTE_10BT)
-			data |= PHY_AUTO_NEG_10BT;
-		if (data & ~PHY_AUTO_NEG_802_3)
-			data |= PHY_REMOTE_ACKNOWLEDGE_NOT;
+			data |= LPA_10HALF;
+		if (data & ~LPA_SLCT)
+			data |= LPA_LPACK;
 		break;
 	default:
 		processed = false;
@@ -830,14 +831,14 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 	u8 p = phy;
 
 	switch (reg) {
-	case PHY_REG_CTRL:
+	case MII_BMCR:
 
 		/* Do not support PHY reset function. */
-		if (val & PHY_RESET)
+		if (val & BMCR_RESET)
 			break;
 		ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
 		data = speed;
-		if (val & PHY_HP_MDIX)
+		if (val & KSZ886X_BMCR_HP_MDIX)
 			data |= PORT_HP_MDIX;
 		else
 			data &= ~PORT_HP_MDIX;
@@ -846,12 +847,12 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 		ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
 		data = ctrl;
 		if (ksz_is_ksz88x3(dev)) {
-			if ((val & PHY_AUTO_NEG_ENABLE))
+			if ((val & BMCR_ANENABLE))
 				data |= PORT_AUTO_NEG_ENABLE;
 			else
 				data &= ~PORT_AUTO_NEG_ENABLE;
 		} else {
-			if (!(val & PHY_AUTO_NEG_ENABLE))
+			if (!(val & BMCR_ANENABLE))
 				data |= PORT_AUTO_NEG_DISABLE;
 			else
 				data &= ~PORT_AUTO_NEG_DISABLE;
@@ -861,11 +862,11 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 				data |= PORT_AUTO_NEG_DISABLE;
 		}
 
-		if (val & PHY_SPEED_100MBIT)
+		if (val & BMCR_SPEED100)
 			data |= PORT_FORCE_100_MBIT;
 		else
 			data &= ~PORT_FORCE_100_MBIT;
-		if (val & PHY_FULL_DUPLEX)
+		if (val & BMCR_FULLDPLX)
 			data |= PORT_FORCE_FULL_DUPLEX;
 		else
 			data &= ~PORT_FORCE_FULL_DUPLEX;
@@ -873,38 +874,38 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 			ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data);
 		ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
 		data = restart;
-		if (val & PHY_LED_DISABLE)
+		if (val & KSZ886X_BMCR_DISABLE_LED)
 			data |= PORT_LED_OFF;
 		else
 			data &= ~PORT_LED_OFF;
-		if (val & PHY_TRANSMIT_DISABLE)
+		if (val & KSZ886X_BMCR_DISABLE_TRANSMIT)
 			data |= PORT_TX_DISABLE;
 		else
 			data &= ~PORT_TX_DISABLE;
-		if (val & PHY_AUTO_NEG_RESTART)
+		if (val & BMCR_ANRESTART)
 			data |= PORT_AUTO_NEG_RESTART;
 		else
 			data &= ~(PORT_AUTO_NEG_RESTART);
-		if (val & PHY_POWER_DOWN)
+		if (val & BMCR_PDOWN)
 			data |= PORT_POWER_DOWN;
 		else
 			data &= ~PORT_POWER_DOWN;
-		if (val & PHY_AUTO_MDIX_DISABLE)
+		if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX)
 			data |= PORT_AUTO_MDIX_DISABLE;
 		else
 			data &= ~PORT_AUTO_MDIX_DISABLE;
-		if (val & PHY_FORCE_MDIX)
+		if (val & KSZ886X_BMCR_FORCE_MDI)
 			data |= PORT_FORCE_MDIX;
 		else
 			data &= ~PORT_FORCE_MDIX;
-		if (val & PHY_LOOPBACK)
+		if (val & BMCR_LOOPBACK)
 			data |= PORT_PHY_LOOPBACK;
 		else
 			data &= ~PORT_PHY_LOOPBACK;
 		if (data != restart)
 			ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], data);
 		break;
-	case PHY_REG_AUTO_NEGOTIATION:
+	case MII_ADVERTISE:
 		ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
 		data = ctrl;
 		data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
@@ -912,15 +913,15 @@ static void ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
 			  PORT_AUTO_NEG_100BTX |
 			  PORT_AUTO_NEG_10BT_FD |
 			  PORT_AUTO_NEG_10BT);
-		if (val & PHY_AUTO_NEG_SYM_PAUSE)
+		if (val & ADVERTISE_PAUSE_CAP)
 			data |= PORT_AUTO_NEG_SYM_PAUSE;
-		if (val & PHY_AUTO_NEG_100BTX_FD)
+		if (val & ADVERTISE_100FULL)
 			data |= PORT_AUTO_NEG_100BTX_FD;
-		if (val & PHY_AUTO_NEG_100BTX)
+		if (val & ADVERTISE_100HALF)
 			data |= PORT_AUTO_NEG_100BTX;
-		if (val & PHY_AUTO_NEG_10BT_FD)
+		if (val & ADVERTISE_10FULL)
 			data |= PORT_AUTO_NEG_10BT_FD;
-		if (val & PHY_AUTO_NEG_10BT)
+		if (val & ADVERTISE_10HALF)
 			data |= PORT_AUTO_NEG_10BT;
 		if (data != ctrl)
 			ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data);
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index c2e52c40a54c..f925ddee5238 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -744,68 +744,6 @@
 
 #define PORT_ACL_FORCE_DLR_MISS		BIT(0)
 
-#ifndef PHY_REG_CTRL
-#define PHY_REG_CTRL			0
-
-#define PHY_RESET			BIT(15)
-#define PHY_LOOPBACK			BIT(14)
-#define PHY_SPEED_100MBIT		BIT(13)
-#define PHY_AUTO_NEG_ENABLE		BIT(12)
-#define PHY_POWER_DOWN			BIT(11)
-#define PHY_MII_DISABLE			BIT(10)
-#define PHY_AUTO_NEG_RESTART		BIT(9)
-#define PHY_FULL_DUPLEX			BIT(8)
-#define PHY_COLLISION_TEST_NOT		BIT(7)
-#define PHY_HP_MDIX			BIT(5)
-#define PHY_FORCE_MDIX			BIT(4)
-#define PHY_AUTO_MDIX_DISABLE		BIT(3)
-#define PHY_REMOTE_FAULT_DISABLE	BIT(2)
-#define PHY_TRANSMIT_DISABLE		BIT(1)
-#define PHY_LED_DISABLE			BIT(0)
-
-#define PHY_REG_STATUS			1
-
-#define PHY_100BT4_CAPABLE		BIT(15)
-#define PHY_100BTX_FD_CAPABLE		BIT(14)
-#define PHY_100BTX_CAPABLE		BIT(13)
-#define PHY_10BT_FD_CAPABLE		BIT(12)
-#define PHY_10BT_CAPABLE		BIT(11)
-#define PHY_MII_SUPPRESS_CAPABLE_NOT	BIT(6)
-#define PHY_AUTO_NEG_ACKNOWLEDGE	BIT(5)
-#define PHY_REMOTE_FAULT		BIT(4)
-#define PHY_AUTO_NEG_CAPABLE		BIT(3)
-#define PHY_LINK_STATUS			BIT(2)
-#define PHY_JABBER_DETECT_NOT		BIT(1)
-#define PHY_EXTENDED_CAPABILITY		BIT(0)
-
-#define PHY_REG_ID_1			2
-#define PHY_REG_ID_2			3
-
-#define PHY_REG_AUTO_NEGOTIATION	4
-
-#define PHY_AUTO_NEG_NEXT_PAGE_NOT	BIT(15)
-#define PHY_AUTO_NEG_REMOTE_FAULT_NOT	BIT(13)
-#define PHY_AUTO_NEG_SYM_PAUSE		BIT(10)
-#define PHY_AUTO_NEG_100BT4		BIT(9)
-#define PHY_AUTO_NEG_100BTX_FD		BIT(8)
-#define PHY_AUTO_NEG_100BTX		BIT(7)
-#define PHY_AUTO_NEG_10BT_FD		BIT(6)
-#define PHY_AUTO_NEG_10BT		BIT(5)
-#define PHY_AUTO_NEG_SELECTOR		0x001F
-#define PHY_AUTO_NEG_802_3		0x0001
-
-#define PHY_REG_REMOTE_CAPABILITY	5
-
-#define PHY_REMOTE_NEXT_PAGE_NOT	BIT(15)
-#define PHY_REMOTE_ACKNOWLEDGE_NOT	BIT(14)
-#define PHY_REMOTE_REMOTE_FAULT_NOT	BIT(13)
-#define PHY_REMOTE_SYM_PAUSE		BIT(10)
-#define PHY_REMOTE_100BTX_FD		BIT(8)
-#define PHY_REMOTE_100BTX		BIT(7)
-#define PHY_REMOTE_10BT_FD		BIT(6)
-#define PHY_REMOTE_10BT			BIT(5)
-#endif
-
 #define KSZ8795_ID_HI			0x0022
 #define KSZ8795_ID_LO			0x1550
 #define KSZ8863_ID_LO			0x1430