summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgb
diff options
context:
space:
mode:
authorJarod Wilson <jarod@redhat.com>2016-10-17 22:54:05 +0300
committerDavid S. Miller <davem@davemloft.net>2016-10-18 18:34:18 +0300
commit91c527a55664ddf4bee26673a35f91748dae4142 (patch)
tree5182f5a33b97804b76af6e0906575dd0044b2e22 /drivers/net/ethernet/intel/ixgb
parente1c6dccaf3af291488fbad155d7ee6bc29db262a (diff)
downloadlinux-91c527a55664ddf4bee26673a35f91748dae4142.tar.xz
ethernet/intel: use core min/max MTU checking
e100: min_mtu 68, max_mtu 1500 - remove e100_change_mtu entirely, is identical to old eth_change_mtu, and no longer serves a purpose. No need to set min_mtu or max_mtu explicitly, as ether_setup() will already set them to 68 and 1500. e1000: min_mtu 46, max_mtu 16110 e1000e: min_mtu 68, max_mtu varies based on adapter fm10k: min_mtu 68, max_mtu 15342 - remove fm10k_change_mtu entirely, does nothing now i40e: min_mtu 68, max_mtu 9706 i40evf: min_mtu 68, max_mtu 9706 igb: min_mtu 68, max_mtu 9216 - There are two different "max" frame sizes claimed and both checked in the driver, the larger value wasn't relevant though, so I've set max_mtu to the smaller of the two values here to retain identical behavior. igbvf: min_mtu 68, max_mtu 9216 - Same issue as igb duplicated ixgb: min_mtu 68, max_mtu 16114 - Also remove pointless old == new check, as that's done in dev_set_mtu ixgbe: min_mtu 68, max_mtu 9710 ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware - Some hw can only handle up to max_mtu 1504 on a vf, others 9710 CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgb')
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_main.c16
1 files changed, 4 insertions, 12 deletions
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index 31f91459312f..5826b1ddedcf 100644
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -487,6 +487,10 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
netdev->vlan_features |= NETIF_F_HIGHDMA;
}
+ /* MTU range: 68 - 16114 */
+ netdev->min_mtu = ETH_MIN_MTU;
+ netdev->max_mtu = IXGB_MAX_JUMBO_FRAME_SIZE - ETH_HLEN;
+
/* make sure the EEPROM is good */
if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
@@ -1619,18 +1623,6 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu)
{
struct ixgb_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
- int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
-
- /* MTU < 68 is an error for IPv4 traffic, just don't allow it */
- if ((new_mtu < 68) ||
- (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) {
- netif_err(adapter, probe, adapter->netdev,
- "Invalid MTU setting %d\n", new_mtu);
- return -EINVAL;
- }
-
- if (old_max_frame == max_frame)
- return 0;
if (netif_running(netdev))
ixgb_down(adapter, true);