summaryrefslogtreecommitdiff
path: root/drivers/net/phy/qsemi.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-12-16 00:22:29 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2020-12-16 00:22:29 +0300
commitd635a69dd4981cc51f90293f5f64268620ed1565 (patch)
tree5e0a758b402ea7d624c25c3a343545dd29e80f31 /drivers/net/phy/qsemi.c
parentac73e3dc8acd0a3be292755db30388c3580f5674 (diff)
parentefd5a1584537698220578227e6467638307c2a0b (diff)
downloadlinux-d635a69dd4981cc51f90293f5f64268620ed1565.tar.xz
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
Diffstat (limited to 'drivers/net/phy/qsemi.c')
-rw-r--r--drivers/net/phy/qsemi.c42
1 files changed, 39 insertions, 3 deletions
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index 1b15a991ee06..d5c1aaa8236a 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -75,6 +75,10 @@ static int qs6612_ack_interrupt(struct phy_device *phydev)
{
int err;
+ /* The Interrupt Source register is not self-clearing, bits 4 and 5 are
+ * cleared when MII_BMSR is read and bits 1 and 3 are cleared when
+ * MII_EXPANSION is read
+ */
err = phy_read(phydev, MII_QS6612_ISR);
if (err < 0)
@@ -96,24 +100,56 @@ static int qs6612_ack_interrupt(struct phy_device *phydev)
static int qs6612_config_intr(struct phy_device *phydev)
{
int err;
- if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ /* clear any interrupts before enabling them */
+ err = qs6612_ack_interrupt(phydev);
+ if (err)
+ return err;
+
err = phy_write(phydev, MII_QS6612_IMR,
MII_QS6612_IMR_INIT);
- else
+ } else {
err = phy_write(phydev, MII_QS6612_IMR, 0);
+ if (err)
+ return err;
+
+ /* clear any leftover interrupts */
+ err = qs6612_ack_interrupt(phydev);
+ }
return err;
}
+static irqreturn_t qs6612_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, MII_QS6612_ISR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & MII_QS6612_IMR_INIT))
+ return IRQ_NONE;
+
+ /* the interrupt source register is not self-clearing */
+ qs6612_ack_interrupt(phydev);
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static struct phy_driver qs6612_driver[] = { {
.phy_id = 0x00181440,
.name = "QS6612",
.phy_id_mask = 0xfffffff0,
/* PHY_BASIC_FEATURES */
.config_init = qs6612_config_init,
- .ack_interrupt = qs6612_ack_interrupt,
.config_intr = qs6612_config_intr,
+ .handle_interrupt = qs6612_handle_interrupt,
} };
module_phy_driver(qs6612_driver);