diff options
author | Andy Chiu <andy.chiu@sifive.com> | 2022-04-05 12:19:26 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-04-20 10:34:16 +0300 |
commit | 1c9fdb9587e01b33098172448a62451652d8f58f (patch) | |
tree | 2afaab8b417aad076b4a7476538e3cba226b17c1 /drivers/net | |
parent | 61dd8bef80c24f8a848d2e4b57e0ded77bf2a1ce (diff) | |
download | linux-1c9fdb9587e01b33098172448a62451652d8f58f.tar.xz |
net: axienet: setup mdio unconditionally
[ Upstream commit d1c4f93e3f0a023024a6f022a61528c06cf1daa9 ]
The call to axienet_mdio_setup should not depend on whether "phy-node"
pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in
SGMII or 100Base-X modes, move it into the if statement. And the next patch
will remove `lp->phy_node` from driver's private structure and do an
of_node_put on it right away after use since it is not used elsewhere.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 13 |
1 files changed, 6 insertions, 7 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 80637ffcca93..fbbbcfe0e891 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -2127,15 +2127,14 @@ static int axienet_probe(struct platform_device *pdev) if (ret) goto cleanup_clk; - lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); - if (lp->phy_node) { - ret = axienet_mdio_setup(lp); - if (ret) - dev_warn(&pdev->dev, - "error registering MDIO bus: %d\n", ret); - } + ret = axienet_mdio_setup(lp); + if (ret) + dev_warn(&pdev->dev, + "error registering MDIO bus: %d\n", ret); + if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII || lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) { + lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); if (!lp->phy_node) { dev_err(&pdev->dev, "phy-handle required for 1000BaseX/SGMII\n"); ret = -EINVAL; |