summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
authorMasahiro Yamada <masahiroy@kernel.org>2020-06-13 19:50:22 +0300
committerMasahiro Yamada <masahiroy@kernel.org>2020-06-13 19:57:21 +0300
commita7f7f6248d9740d710fd6bd190293fe5e16410ac (patch)
treedc59d36a552f7e25f909f5b2edc83f96c013befa /drivers/net
parente4a42c82e943b97ce124539fcd7a47445b43fa0d (diff)
downloadlinux-a7f7f6248d9740d710fd6bd190293fe5e16410ac.tar.xz
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig46
-rw-r--r--drivers/net/appletalk/Kconfig4
-rw-r--r--drivers/net/arcnet/Kconfig8
-rw-r--r--drivers/net/caif/Kconfig10
-rw-r--r--drivers/net/can/Kconfig30
-rw-r--r--drivers/net/can/c_can/Kconfig4
-rw-r--r--drivers/net/can/cc770/Kconfig4
-rw-r--r--drivers/net/can/ifi_canfd/Kconfig2
-rw-r--r--drivers/net/can/m_can/Kconfig6
-rw-r--r--drivers/net/can/mscan/Kconfig4
-rw-r--r--drivers/net/can/peak_canfd/Kconfig2
-rw-r--r--drivers/net/can/rcar/Kconfig4
-rw-r--r--drivers/net/can/sja1000/Kconfig18
-rw-r--r--drivers/net/can/softing/Kconfig4
-rw-r--r--drivers/net/can/spi/Kconfig4
-rw-r--r--drivers/net/can/usb/Kconfig16
-rw-r--r--drivers/net/dsa/Kconfig26
-rw-r--r--drivers/net/dsa/qca/Kconfig2
-rw-r--r--drivers/net/ethernet/3com/Kconfig14
-rw-r--r--drivers/net/ethernet/8390/Kconfig32
-rw-r--r--drivers/net/ethernet/Kconfig18
-rw-r--r--drivers/net/ethernet/adaptec/Kconfig4
-rw-r--r--drivers/net/ethernet/aeroflex/Kconfig2
-rw-r--r--drivers/net/ethernet/agere/Kconfig4
-rw-r--r--drivers/net/ethernet/alacritech/Kconfig4
-rw-r--r--drivers/net/ethernet/allwinner/Kconfig4
-rw-r--r--drivers/net/ethernet/alteon/Kconfig6
-rw-r--r--drivers/net/ethernet/altera/Kconfig2
-rw-r--r--drivers/net/ethernet/amazon/Kconfig4
-rw-r--r--drivers/net/ethernet/amd/Kconfig34
-rw-r--r--drivers/net/ethernet/apple/Kconfig10
-rw-r--r--drivers/net/ethernet/aquantia/Kconfig4
-rw-r--r--drivers/net/ethernet/arc/Kconfig6
-rw-r--r--drivers/net/ethernet/atheros/Kconfig10
-rw-r--r--drivers/net/ethernet/broadcom/Kconfig32
-rw-r--r--drivers/net/ethernet/brocade/Kconfig2
-rw-r--r--drivers/net/ethernet/brocade/bna/Kconfig2
-rw-r--r--drivers/net/ethernet/cadence/Kconfig8
-rw-r--r--drivers/net/ethernet/cavium/Kconfig16
-rw-r--r--drivers/net/ethernet/chelsio/Kconfig18
-rw-r--r--drivers/net/ethernet/cirrus/Kconfig6
-rw-r--r--drivers/net/ethernet/cisco/Kconfig2
-rw-r--r--drivers/net/ethernet/cisco/enic/Kconfig2
-rw-r--r--drivers/net/ethernet/cortina/Kconfig4
-rw-r--r--drivers/net/ethernet/davicom/Kconfig4
-rw-r--r--drivers/net/ethernet/dec/Kconfig2
-rw-r--r--drivers/net/ethernet/dec/tulip/Kconfig26
-rw-r--r--drivers/net/ethernet/dlink/Kconfig8
-rw-r--r--drivers/net/ethernet/emulex/Kconfig2
-rw-r--r--drivers/net/ethernet/ezchip/Kconfig4
-rw-r--r--drivers/net/ethernet/faraday/Kconfig6
-rw-r--r--drivers/net/ethernet/freescale/Kconfig16
-rw-r--r--drivers/net/ethernet/freescale/dpaa/Kconfig2
-rw-r--r--drivers/net/ethernet/fujitsu/Kconfig4
-rw-r--r--drivers/net/ethernet/hisilicon/Kconfig22
-rw-r--r--drivers/net/ethernet/huawei/Kconfig2
-rw-r--r--drivers/net/ethernet/huawei/hinic/Kconfig2
-rw-r--r--drivers/net/ethernet/i825xx/Kconfig14
-rw-r--r--drivers/net/ethernet/ibm/Kconfig8
-rw-r--r--drivers/net/ethernet/intel/Kconfig46
-rw-r--r--drivers/net/ethernet/marvell/Kconfig24
-rw-r--r--drivers/net/ethernet/marvell/octeontx2/Kconfig2
-rw-r--r--drivers/net/ethernet/mediatek/Kconfig4
-rw-r--r--drivers/net/ethernet/mellanox/Kconfig2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/Kconfig8
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/Kconfig18
-rw-r--r--drivers/net/ethernet/mellanox/mlxfw/Kconfig2
-rw-r--r--drivers/net/ethernet/mellanox/mlxsw/Kconfig20
-rw-r--r--drivers/net/ethernet/micrel/Kconfig10
-rw-r--r--drivers/net/ethernet/microchip/Kconfig10
-rw-r--r--drivers/net/ethernet/moxa/Kconfig4
-rw-r--r--drivers/net/ethernet/myricom/Kconfig6
-rw-r--r--drivers/net/ethernet/natsemi/Kconfig12
-rw-r--r--drivers/net/ethernet/neterion/Kconfig8
-rw-r--r--drivers/net/ethernet/netronome/Kconfig8
-rw-r--r--drivers/net/ethernet/nvidia/Kconfig4
-rw-r--r--drivers/net/ethernet/oki-semi/Kconfig2
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/Kconfig2
-rw-r--r--drivers/net/ethernet/packetengines/Kconfig6
-rw-r--r--drivers/net/ethernet/pasemi/Kconfig4
-rw-r--r--drivers/net/ethernet/qlogic/Kconfig20
-rw-r--r--drivers/net/ethernet/qualcomm/Kconfig8
-rw-r--r--drivers/net/ethernet/qualcomm/rmnet/Kconfig2
-rw-r--r--drivers/net/ethernet/rdc/Kconfig4
-rw-r--r--drivers/net/ethernet/realtek/Kconfig18
-rw-r--r--drivers/net/ethernet/renesas/Kconfig4
-rw-r--r--drivers/net/ethernet/rocker/Kconfig4
-rw-r--r--drivers/net/ethernet/samsung/Kconfig4
-rw-r--r--drivers/net/ethernet/seeq/Kconfig6
-rw-r--r--drivers/net/ethernet/sfc/Kconfig12
-rw-r--r--drivers/net/ethernet/sfc/falcon/Kconfig4
-rw-r--r--drivers/net/ethernet/sgi/Kconfig4
-rw-r--r--drivers/net/ethernet/silan/Kconfig4
-rw-r--r--drivers/net/ethernet/sis/Kconfig6
-rw-r--r--drivers/net/ethernet/smsc/Kconfig18
-rw-r--r--drivers/net/ethernet/socionext/Kconfig6
-rw-r--r--drivers/net/ethernet/stmicro/Kconfig2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig24
-rw-r--r--drivers/net/ethernet/sun/Kconfig18
-rw-r--r--drivers/net/ethernet/synopsys/Kconfig6
-rw-r--r--drivers/net/ethernet/tehuti/Kconfig4
-rw-r--r--drivers/net/ethernet/ti/Kconfig20
-rw-r--r--drivers/net/ethernet/toshiba/Kconfig8
-rw-r--r--drivers/net/ethernet/tundra/Kconfig4
-rw-r--r--drivers/net/ethernet/via/Kconfig8
-rw-r--r--drivers/net/ethernet/wiznet/Kconfig14
-rw-r--r--drivers/net/ethernet/xilinx/Kconfig8
-rw-r--r--drivers/net/ethernet/xircom/Kconfig4
-rw-r--r--drivers/net/ethernet/xscale/Kconfig4
-rw-r--r--drivers/net/fddi/Kconfig8
-rw-r--r--drivers/net/hamradio/Kconfig16
-rw-r--r--drivers/net/hippi/Kconfig6
-rw-r--r--drivers/net/ieee802154/Kconfig24
-rw-r--r--drivers/net/phy/Kconfig78
-rw-r--r--drivers/net/plip/Kconfig2
-rw-r--r--drivers/net/ppp/Kconfig24
-rw-r--r--drivers/net/slip/Kconfig10
-rw-r--r--drivers/net/team/Kconfig12
-rw-r--r--drivers/net/usb/Kconfig12
-rw-r--r--drivers/net/wan/Kconfig16
-rw-r--r--drivers/net/wireless/Kconfig10
-rw-r--r--drivers/net/wireless/admtek/Kconfig4
-rw-r--r--drivers/net/wireless/ath/Kconfig10
-rw-r--r--drivers/net/wireless/ath/ar5523/Kconfig2
-rw-r--r--drivers/net/wireless/ath/ath10k/Kconfig22
-rw-r--r--drivers/net/wireless/ath/ath11k/Kconfig8
-rw-r--r--drivers/net/wireless/ath/ath5k/Kconfig12
-rw-r--r--drivers/net/wireless/ath/ath6kl/Kconfig12
-rw-r--r--drivers/net/wireless/ath/ath9k/Kconfig30
-rw-r--r--drivers/net/wireless/ath/wcn36xx/Kconfig4
-rw-r--r--drivers/net/wireless/ath/wil6210/Kconfig8
-rw-r--r--drivers/net/wireless/atmel/Kconfig10
-rw-r--r--drivers/net/wireless/broadcom/Kconfig2
-rw-r--r--drivers/net/wireless/broadcom/b43/Kconfig18
-rw-r--r--drivers/net/wireless/broadcom/b43legacy/Kconfig10
-rw-r--r--drivers/net/wireless/broadcom/brcm80211/Kconfig6
-rw-r--r--drivers/net/wireless/cisco/Kconfig6
-rw-r--r--drivers/net/wireless/intel/Kconfig2
-rw-r--r--drivers/net/wireless/intel/ipw2x00/Kconfig18
-rw-r--r--drivers/net/wireless/intel/iwlegacy/Kconfig8
-rw-r--r--drivers/net/wireless/intel/iwlwifi/Kconfig6
-rw-r--r--drivers/net/wireless/intersil/Kconfig4
-rw-r--r--drivers/net/wireless/intersil/hostap/Kconfig12
-rw-r--r--drivers/net/wireless/intersil/orinoco/Kconfig12
-rw-r--r--drivers/net/wireless/intersil/p54/Kconfig10
-rw-r--r--drivers/net/wireless/marvell/Kconfig4
-rw-r--r--drivers/net/wireless/marvell/libertas/Kconfig12
-rw-r--r--drivers/net/wireless/marvell/libertas_tf/Kconfig6
-rw-r--r--drivers/net/wireless/marvell/mwifiex/Kconfig8
-rw-r--r--drivers/net/wireless/mediatek/Kconfig2
-rw-r--r--drivers/net/wireless/mediatek/mt7601u/Kconfig2
-rw-r--r--drivers/net/wireless/ralink/Kconfig2
-rw-r--r--drivers/net/wireless/ralink/rt2x00/Kconfig42
-rw-r--r--drivers/net/wireless/realtek/Kconfig2
-rw-r--r--drivers/net/wireless/realtek/rtl818x/Kconfig4
-rw-r--r--drivers/net/wireless/realtek/rtl8xxxu/Kconfig4
-rw-r--r--drivers/net/wireless/realtek/rtlwifi/Kconfig22
-rw-r--r--drivers/net/wireless/rsi/Kconfig12
-rw-r--r--drivers/net/wireless/st/Kconfig2
-rw-r--r--drivers/net/wireless/ti/Kconfig4
-rw-r--r--drivers/net/wireless/ti/wl1251/Kconfig6
-rw-r--r--drivers/net/wireless/ti/wl12xx/Kconfig2
-rw-r--r--drivers/net/wireless/ti/wl18xx/Kconfig2
-rw-r--r--drivers/net/wireless/ti/wlcore/Kconfig6
-rw-r--r--drivers/net/wireless/zydas/Kconfig4
-rw-r--r--drivers/net/wireless/zydas/zd1211rw/Kconfig4
166 files changed, 811 insertions, 811 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c7d310ef1c83..9a49c4c2316b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -7,7 +7,7 @@ menuconfig NETDEVICES
default y if UML
depends on NET
bool "Network device support"
- ---help---
+ help
You can say N here if you don't intend to connect your Linux box to
any other computer at all.
@@ -32,7 +32,7 @@ config MII
config NET_CORE
default y
bool "Network core driver support"
- ---help---
+ help
You can say N here if you do not intend to use any of the
networking core drivers (i.e. VLAN, bridging, bonding, etc.)
@@ -42,7 +42,7 @@ config BONDING
tristate "Bonding driver support"
depends on INET
depends on IPV6 || IPV6=n
- ---help---
+ help
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
Channels together. This is called 'Etherchannel' by Cisco,
'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
@@ -58,7 +58,7 @@ config BONDING
config DUMMY
tristate "Dummy net driver support"
- ---help---
+ help
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
address. It is most commonly used in order to make your currently
@@ -116,7 +116,7 @@ config WIREGUARD_DEBUG
config EQUALIZER
tristate "EQL (serial line load balancing) support"
- ---help---
+ help
If you have two serial connections to some other computer (this
usually requires two modems and two telephone lines) and you use
SLIP (the protocol for sending Internet traffic over telephone
@@ -150,7 +150,7 @@ config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
select NET_REDIRECT
- ---help---
+ help
This is an intermediate driver that allows sharing of
resources.
To compile this driver as a module, choose M here: the module
@@ -164,7 +164,7 @@ source "drivers/net/team/Kconfig"
config MACVLAN
tristate "MAC-VLAN support"
- ---help---
+ help
This allows one to create virtual interfaces that map packets to
or from specific MAC addresses to a particular interface.
@@ -200,7 +200,7 @@ config IPVLAN
tristate "IP-VLAN support"
depends on INET
depends on IPV6 || !IPV6
- ---help---
+ help
This allows one to create virtual devices off of a main interface
and packets will be delivered based on the dest L3 (IPv6/IPv4 addr)
on packets. All interfaces (including the main interface) share L2
@@ -219,7 +219,7 @@ config IPVTAP
depends on IPVLAN
depends on INET
select TAP
- ---help---
+ help
This adds a specialized tap character device driver that is based
on the IP-VLAN network interface, called ipvtap. An ipvtap device
can be added in the same way as a ipvlan device, using 'type
@@ -233,7 +233,7 @@ config VXLAN
depends on INET
select NET_UDP_TUNNEL
select GRO_CELLS
- ---help---
+ help
This allows one to create vxlan virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. VXLAN is often used
to tunnel virtual network infrastructure in virtualized environments.
@@ -249,7 +249,7 @@ config GENEVE
depends on IPV6 || !IPV6
select NET_UDP_TUNNEL
select GRO_CELLS
- ---help---
+ help
This allows one to create geneve virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. GENEVE is often used
to tunnel virtual network infrastructure in virtualized environments.
@@ -276,7 +276,7 @@ config GTP
tristate "GPRS Tunneling Protocol datapath (GTP-U)"
depends on INET
select NET_UDP_TUNNEL
- ---help---
+ help
This allows one to create gtp virtual interfaces that provide
the GPRS Tunneling Protocol datapath (GTP-U). This tunneling protocol
is used to prevent subscribers from accessing mobile carrier core
@@ -295,12 +295,12 @@ config MACSEC
select CRYPTO_AES
select CRYPTO_GCM
select GRO_CELLS
- ---help---
+ help
MACsec is an encryption standard for Ethernet.
config NETCONSOLE
tristate "Network console logging support"
- ---help---
+ help
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.rst> for details.
@@ -343,7 +343,7 @@ config TUN
tristate "Universal TUN/TAP device driver support"
depends on INET
select CRC32
- ---help---
+ help
TUN/TAP provides packet reception and transmission for user space
programs. It can be viewed as a simple Point-to-Point or Ethernet
device, which instead of receiving packets from a physical media,
@@ -365,14 +365,14 @@ config TUN
config TAP
tristate
- ---help---
+ help
This option is selected by any driver implementing tap user space
interface for a virtual interface to re-use core tap functionality.
config TUN_VNET_CROSS_LE
bool "Support for cross-endian vnet headers on little-endian kernels"
default n
- ---help---
+ help
This option allows TUN/TAP and MACVTAP device drivers in a
little-endian kernel to parse vnet headers that come from a
big-endian legacy virtio device.
@@ -385,7 +385,7 @@ config TUN_VNET_CROSS_LE
config VETH
tristate "Virtual ethernet pair device"
- ---help---
+ help
This device is a local ethernet tunnel. Devices are created in pairs.
When one end receives the packet it appears on its pair and vice
versa.
@@ -394,13 +394,13 @@ config VIRTIO_NET
tristate "Virtio network driver"
depends on VIRTIO
select NET_FAILOVER
- ---help---
+ help
This is the virtual network driver for virtio. It can be used with
QEMU based VMMs (like KVM or Xen). Say Y or M.
config NLMON
tristate "Virtual netlink monitoring device"
- ---help---
+ help
This option enables a monitoring net device for netlink skbs. The
purpose of this is to analyze netlink messages with packet sockets.
Thus applications like tcpdump will be able to see local netlink
@@ -414,14 +414,14 @@ config NET_VRF
depends on NET_L3_MASTER_DEV
depends on IPV6 || IPV6=n
depends on IPV6_MULTIPLE_TABLES || IPV6=n
- ---help---
+ help
This option enables the support for mapping interfaces into VRF's. The
support enables VRF devices.
config VSOCKMON
tristate "Virtual vsock monitoring device"
depends on VHOST_VSOCK
- ---help---
+ help
This option enables a monitoring net device for vsock sockets. It is
mostly intended for developers or support to debug vsock issues. If
unsure, say N.
@@ -450,7 +450,7 @@ source "drivers/net/ipa/Kconfig"
config NET_SB1000
tristate "General Instruments Surfboard 1000"
depends on PNP
- ---help---
+ help
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
cable modem. This is an ISA card which is used by a number of cable
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 10589a82263b..09f94d4b14e2 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -5,7 +5,7 @@
config ATALK
tristate "Appletalk protocol support"
select LLC
- ---help---
+ help
AppleTalk is the protocol that Apple computers can use to communicate
on a network. If your Linux box is connected to such a network and you
wish to connect to it, say Y. You will need to use the netatalk package
@@ -79,7 +79,7 @@ config COPS_TANGENT
config IPDDP
tristate "Appletalk-IP driver support"
depends on DEV_APPLETALK && ATALK
- ---help---
+ help
This allows IP networking for users who only have AppleTalk
networking available. This feature is experimental. With this
driver, you can encapsulate IP inside AppleTalk (e.g. if your Linux
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 43eef60653b2..a51b9dab6d3a 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -6,7 +6,7 @@
menuconfig ARCNET
depends on NETDEVICES && (ISA || PCI || PCMCIA)
tristate "ARCnet support"
- ---help---
+ help
If you have a network card of this type, say Y and check out the
(arguably) beautiful poetry in
<file:Documentation/networking/arcnet.rst>.
@@ -33,7 +33,7 @@ config ARCNET_1201
config ARCNET_1051
tristate "Enable old ARCNet packet format (RFC 1051)"
- ---help---
+ help
This allows you to use RFC1051 with your ARCnet card via the virtual
arc0s device. You only need arc0s if you want to talk to ARCnet
software complying with the "old" standard, specifically, the DOS
@@ -82,7 +82,7 @@ config ARCNET_COM90xx
config ARCNET_COM90xxIO
tristate "ARCnet COM90xx (IO mapped) chipset driver"
- ---help---
+ help
This is the chipset driver for the COM90xx cards, using them in
IO-mapped mode instead of memory-mapped mode. This is slower than
the normal driver. Only use it if your card doesn't support shared
@@ -93,7 +93,7 @@ config ARCNET_COM90xxIO
config ARCNET_RIM_I
tristate "ARCnet COM90xx (RIM I) chipset driver"
- ---help---
+ help
This is yet another chipset driver for the COM90xx cards, but this
time only using memory-mapped mode, and no IO ports at all. This
driver is completely untested, so if you have one of these cards,
diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig
index 1f2f2e8209c3..c245edddb48b 100644
--- a/drivers/net/caif/Kconfig
+++ b/drivers/net/caif/Kconfig
@@ -15,7 +15,7 @@ config CAIF_TTY
tristate "CAIF TTY transport driver"
depends on CAIF && TTY
default n
- ---help---
+ help
The CAIF TTY transport driver is a Line Discipline (ldisc)
identified as N_CAIF. When this ldisc is opened from user space
it will redirect the TTY's traffic into the CAIF stack.
@@ -24,7 +24,7 @@ config CAIF_SPI_SLAVE
tristate "CAIF SPI transport driver for slave interface"
depends on CAIF && HAS_DMA
default n
- ---help---
+ help
The CAIF Link layer SPI Protocol driver for Slave SPI interface.
This driver implements a platform driver to accommodate for a
platform specific SPI device. A sample CAIF SPI Platform device is
@@ -34,7 +34,7 @@ config CAIF_SPI_SYNC
bool "Next command and length in start of frame"
depends on CAIF_SPI_SLAVE
default n
- ---help---
+ help
Putting the next command and length in the start of the frame can
help to synchronize to the next transfer in case of over or under-runs.
This option also needs to be enabled on the modem.
@@ -43,7 +43,7 @@ config CAIF_HSI
tristate "CAIF HSI transport driver"
depends on CAIF
default n
- ---help---
+ help
The CAIF low level driver for CAIF over HSI.
Be aware that if you enable this then you also need to
enable a low-level HSI driver.
@@ -55,7 +55,7 @@ config CAIF_VIRTIO
select VIRTIO
select GENERIC_ALLOCATOR
default n
- ---help---
+ help
The CAIF driver for CAIF over Virtio.
endif # CAIF_DRIVERS
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 17c166cc8482..f07012a76c0c 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -3,7 +3,7 @@ menu "CAN Device Drivers"
config CAN_VCAN
tristate "Virtual Local CAN Interface (vcan)"
- ---help---
+ help
Similar to the network loopback devices, vcan offers a
virtual local CAN interface.
@@ -12,7 +12,7 @@ config CAN_VCAN
config CAN_VXCAN
tristate "Virtual CAN Tunnel (vxcan)"
- ---help---
+ help
Similar to the virtual ethernet driver veth, vxcan implements a
local CAN traffic tunnel between two virtual CAN network devices.
When creating a vxcan, two vxcan devices are created as pair.
@@ -31,7 +31,7 @@ config CAN_VXCAN
config CAN_SLCAN
tristate "Serial / USB serial CAN Adaptors (slcan)"
depends on TTY
- ---help---
+ help
CAN driver for several 'low cost' CAN interfaces that are attached
via serial lines or via USB-to-serial adapters using the LAWICEL
ASCII protocol. The driver implements the tty linediscipline N_SLCAN.
@@ -51,7 +51,7 @@ config CAN_SLCAN
config CAN_DEV
tristate "Platform CAN drivers with Netlink support"
default y
- ---help---
+ help
Enables the common framework for platform CAN drivers with Netlink
support. This is the standard library for CAN drivers.
If unsure, say Y.
@@ -61,7 +61,7 @@ if CAN_DEV
config CAN_CALC_BITTIMING
bool "CAN bit-timing calculation"
default y
- ---help---
+ help
If enabled, CAN bit-timing parameters will be calculated for the
bit-rate specified via Netlink argument "bitrate" when the device
get started. This works fine for the most common CAN controllers
@@ -81,7 +81,7 @@ config CAN_LEDS
# fulfills your needs instead of fixing this driver.
depends on BROKEN
select LEDS_TRIGGERS
- ---help---
+ help
This option adds two LED triggers for packet receive and transmit
events on each supported CAN device.
@@ -91,20 +91,20 @@ config CAN_LEDS
config CAN_AT91
tristate "Atmel AT91 onchip CAN controller"
depends on (ARCH_AT91 || COMPILE_TEST) && HAS_IOMEM
- ---help---
+ help
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
and AT91SAM9X5 processors.
config CAN_FLEXCAN
tristate "Support for Freescale FLEXCAN based chips"
depends on OF && HAS_IOMEM
- ---help---
+ help
Say Y here if you want to support for Freescale FlexCAN.
config CAN_GRCAN
tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
depends on OF && HAS_DMA
- ---help---
+ help
Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
Note that the driver supports little endian, even though little
endian syntheses of the cores would need some modifications on
@@ -113,7 +113,7 @@ config CAN_GRCAN
config CAN_JANZ_ICAN3
tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
depends on MFD_JANZ_CMODIO
- ---help---
+ help
Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
connects to a MODULbus carrier board.
@@ -136,7 +136,7 @@ config CAN_KVASER_PCIEFD
config CAN_SUN4I
tristate "Allwinner A10 CAN controller"
depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
- ---help---
+ help
Say Y here if you want to use CAN controller found on Allwinner
A10/A20 SoCs.
@@ -146,7 +146,7 @@ config CAN_SUN4I
config CAN_TI_HECC
depends on ARM
tristate "TI High End CAN Controller"
- ---help---
+ help
Driver for TI HECC (High End CAN Controller) module found on many
TI devices. The device specifications are available from www.ti.com
@@ -154,14 +154,14 @@ config CAN_XILINXCAN
tristate "Xilinx CAN"
depends on ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST
depends on COMMON_CLK && HAS_IOMEM
- ---help---
+ help
Xilinx CAN driver. This driver supports both soft AXI CAN IP and
Zynq CANPS IP.
config PCH_CAN
tristate "Intel EG20T PCH CAN controller"
depends on PCI && (X86_32 || COMPILE_TEST)
- ---help---
+ help
This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
is an IOH for x86 embedded processor (Intel Atom E6xx series).
This driver can access CAN bus.
@@ -182,7 +182,7 @@ endif
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
- ---help---
+ help
Say Y here if you want the CAN device drivers to produce a bunch of
debug messages to the system log. Select this if you are having
a problem with CAN support and want to see more of what is going
diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig
index b0f206d36f55..962725788b0a 100644
--- a/drivers/net/can/c_can/Kconfig
+++ b/drivers/net/can/c_can/Kconfig
@@ -7,7 +7,7 @@ if CAN_C_CAN
config CAN_C_CAN_PLATFORM
tristate "Generic Platform Bus based C_CAN/D_CAN driver"
- ---help---
+ help
This driver adds support for the C_CAN/D_CAN chips connected
to the "platform bus" (Linux abstraction for directly to the
processor attached devices) which can be found on various
@@ -18,7 +18,7 @@ config CAN_C_CAN_PLATFORM
config CAN_C_CAN_PCI
tristate "Generic PCI Bus based C_CAN/D_CAN driver"
depends on PCI
- ---help---
+ help
This driver adds support for the C_CAN/D_CAN chips connected
to the PCI bus.
endif
diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig
index 13a4593a52df..9ef1359319f0 100644
--- a/drivers/net/can/cc770/Kconfig
+++ b/drivers/net/can/cc770/Kconfig
@@ -7,14 +7,14 @@ if CAN_CC770
config CAN_CC770_ISA
tristate "ISA Bus based legacy CC770 driver"
- ---help---
+ help
This driver adds legacy support for CC770 and AN82527 chips
connected to the ISA bus using I/O port, memory mapped or
indirect access.
config CAN_CC770_PLATFORM
tristate "Generic Platform Bus based CC770 driver"
- ---help---
+ help
This driver adds support for the CC770 and AN82527 chips
connected to the "platform bus" (Linux abstraction for directly
to the processor attached devices).
diff --git a/drivers/net/can/ifi_canfd/Kconfig b/drivers/net/can/ifi_canfd/Kconfig
index ce0197641a59..b5dd9c13d529 100644
--- a/drivers/net/can/ifi_canfd/Kconfig
+++ b/drivers/net/can/ifi_canfd/Kconfig
@@ -2,7 +2,7 @@
config CAN_IFI_CANFD
depends on HAS_IOMEM
tristate "IFI CAN_FD IP"
- ---help---
+ help
This driver adds support for the I/F/I CAN_FD soft IP block
connected to the "platform bus" (Linux abstraction for directly
to the processor attached devices). The CAN_FD is most often
diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index 1ff0b7fe81d6..d9216147ca93 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config CAN_M_CAN
tristate "Bosch M_CAN support"
- ---help---
+ help
Say Y here if you want support for Bosch M_CAN controller framework.
This is common support for devices that embed the Bosch M_CAN IP.
@@ -9,7 +9,7 @@ config CAN_M_CAN_PLATFORM
tristate "Bosch M_CAN support for io-mapped devices"
depends on HAS_IOMEM
depends on CAN_M_CAN
- ---help---
+ help
Say Y here if you want support for IO Mapped Bosch M_CAN controller.
This support is for devices that have the Bosch M_CAN controller
IP embedded into the device and the IP is IO Mapped to the processor.
@@ -18,7 +18,7 @@ config CAN_M_CAN_TCAN4X5X
depends on CAN_M_CAN
depends on REGMAP_SPI
tristate "TCAN4X5X M_CAN device"
- ---help---
+ help
Say Y here if you want support for Texas Instruments TCAN4x5x
M_CAN controller. This device is a peripherial device that uses the
SPI bus for communication.
diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
index 3a57a51be22e..dfe6bd9947bb 100644
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
@@ -2,7 +2,7 @@
config CAN_MSCAN
depends on PPC
tristate "Support for Freescale MSCAN based chips"
- ---help---
+ help
The Motorola Scalable Controller Area Network (MSCAN) definition
is based on the MSCAN12 definition which is the specific
implementation of the Motorola Scalable CAN concept targeted for
@@ -13,7 +13,7 @@ if CAN_MSCAN
config CAN_MPC5XXX
tristate "Freescale MPC5xxx onboard CAN controller"
depends on (PPC_MPC52xx || PPC_MPC512x)
- ---help---
+ help
If you say yes here you get support for Freescale's MPC5xxx
onboard CAN controller. Currently, the MPC5200, MPC5200B and
MPC5121 (Rev. 2 and later) are supported.
diff --git a/drivers/net/can/peak_canfd/Kconfig b/drivers/net/can/peak_canfd/Kconfig
index c29ab2150794..f7e412766dbd 100644
--- a/drivers/net/can/peak_canfd/Kconfig
+++ b/drivers/net/can/peak_canfd/Kconfig
@@ -2,7 +2,7 @@
config CAN_PEAK_PCIEFD
depends on PCI
tristate "PEAK-System PCAN-PCIe FD cards"
- ---help---
+ help
This driver adds support for the PEAK-System PCI Express FD
CAN-FD cards family.
These 1x or 2x CAN-FD channels cards offer CAN 2.0 a/b as well as
diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig
index bd5a8fcd83e1..8d36101b78e3 100644
--- a/drivers/net/can/rcar/Kconfig
+++ b/drivers/net/can/rcar/Kconfig
@@ -2,7 +2,7 @@
config CAN_RCAR
tristate "Renesas R-Car CAN controller"
depends on ARCH_RENESAS || ARM
- ---help---
+ help
Say Y here if you want to use CAN controller found on Renesas R-Car
SoCs.
@@ -12,7 +12,7 @@ config CAN_RCAR
config CAN_RCAR_CANFD
tristate "Renesas R-Car CAN FD controller"
depends on ARCH_RENESAS || ARM
- ---help---
+ help
Say Y here if you want to use CAN FD controller found on
Renesas R-Car SoCs. The driver puts the controller in CAN FD only
mode, which can interoperate with CAN2.0 nodes but does not support
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 32d242dc0d9f..110071b26921 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -9,7 +9,7 @@ if CAN_SJA1000
config CAN_EMS_PCI
tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
depends on PCI
- ---help---
+ help
This driver is for the one, two or four channel CPC-PCI,
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
@@ -17,7 +17,7 @@ config CAN_EMS_PCI
config CAN_EMS_PCMCIA
tristate "EMS CPC-CARD Card"
depends on PCMCIA
- ---help---
+ help
This driver is for the one or two channel CPC-CARD cards from
EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
@@ -34,14 +34,14 @@ config CAN_F81601
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI
- ---help---
+ help
This driver is for the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
config CAN_PEAK_PCI
tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
depends on PCI
- ---help---
+ help
This driver is for the PCAN-PCI/PCIe/miniPCI cards
(1, 2, 3 or 4 channels) from PEAK-System Technik
(http://www.peak-system.com).
@@ -52,7 +52,7 @@ config CAN_PEAK_PCIEC
select I2C
select I2C_ALGOBIT
default y
- ---help---
+ help
Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
Technik. This will also automatically select I2C and I2C_ALGO
configuration options.
@@ -61,7 +61,7 @@ config CAN_PEAK_PCMCIA
tristate "PEAK PCAN-PC Card"
depends on PCMCIA
depends on HAS_IOPORT_MAP
- ---help---
+ help
This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
from PEAK-System (http://www.peak-system.com). To compile this
driver as a module, choose M here: the module will be called
@@ -70,7 +70,7 @@ config CAN_PEAK_PCMCIA
config CAN_PLX_PCI
tristate "PLX90xx PCI-bridge based Cards"
depends on PCI
- ---help---
+ help
This driver is for CAN interface cards based on
the PLX90xx PCI bridge.
Driver supports now:
@@ -87,13 +87,13 @@ config CAN_PLX_PCI
config CAN_SJA1000_ISA
tristate "ISA Bus based legacy SJA1000 driver"
- ---help---
+ help
This driver adds legacy support for SJA1000 chips connected to
the ISA bus using I/O port, memory mapped or indirect access.
config CAN_SJA1000_PLATFORM
tristate "Generic Platform Bus based SJA1000 driver"
- ---help---
+ help
This driver adds support for the SJA1000 chips connected to
the "platform bus" (Linux abstraction for directly to the
processor attached devices). Which can be found on various
diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig
index 0f1708f99308..16b9eec63490 100644
--- a/drivers/net/can/softing/Kconfig
+++ b/drivers/net/can/softing/Kconfig
@@ -2,7 +2,7 @@
config CAN_SOFTING
tristate "Softing Gmbh CAN generic support"
depends on HAS_IOMEM
- ---help---
+ help
Support for CAN cards from Softing Gmbh & some cards
from Vector Gmbh.
Softing Gmbh CAN cards come with 1 or 2 physical busses.
@@ -20,7 +20,7 @@ config CAN_SOFTING_CS
tristate "Softing Gmbh CAN pcmcia cards"
depends on PCMCIA
depends on CAN_SOFTING
- ---help---
+ help
Support for PCMCIA cards from Softing Gmbh & some cards
from Vector Gmbh.
You need firmware for these, which you can get at
diff --git a/drivers/net/can/spi/Kconfig b/drivers/net/can/spi/Kconfig
index 1c50788055cb..f780c79aac6f 100644
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
@@ -5,13 +5,13 @@ menu "CAN SPI interfaces"
config CAN_HI311X
tristate "Holt HI311x SPI CAN controllers"
depends on CAN_DEV && SPI && HAS_DMA
- ---help---
+ help
Driver for the Holt HI311x SPI CAN controllers.
config CAN_MCP251X
tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
depends on HAS_DMA
- ---help---
+ help
Driver for the Microchip MCP251x and MCP25625 SPI CAN
controllers.
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index b412f7ba4f89..77fa830fe7dd 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -4,25 +4,25 @@ menu "CAN USB interfaces"
config CAN_8DEV_USB
tristate "8 devices USB2CAN interface"
- ---help---
+ help
This driver supports the USB2CAN interface
from 8 devices (http://www.8devices.com).
config CAN_EMS_USB
tristate "EMS CPC-USB/ARM7 CAN/USB interface"
- ---help---
+ help
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
config CAN_ESD_USB2
tristate "ESD USB/2 CAN/USB interface"
- ---help---
+ help
This driver supports the CAN-USB/2 interface
from esd electronic system design gmbh (http://www.esd.eu).
config CAN_GS_USB
tristate "Geschwister Schneider UG interfaces"
- ---help---
+ help
This driver supports the Geschwister Schneider and bytewerk.org
candleLight USB CAN interfaces USB/CAN devices
If unsure choose N,
@@ -31,7 +31,7 @@ config CAN_GS_USB
config CAN_KVASER_USB
tristate "Kvaser CAN/USB interface"
- ---help---
+ help
This driver adds support for Kvaser CAN/USB devices like Kvaser
Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS.
@@ -82,13 +82,13 @@ config CAN_KVASER_USB
config CAN_MCBA_USB
tristate "Microchip CAN BUS Analyzer interface"
- ---help---
+ help
This driver supports the CAN BUS Analyzer interface
from Microchip (http://www.microchip.com/development-tools/).
config CAN_PEAK_USB
tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
- ---help---
+ help
This driver supports the PEAK-System Technik USB adapters that enable
access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD
standards, that is:
@@ -104,7 +104,7 @@ config CAN_PEAK_USB
config CAN_UCAN
tristate "Theobroma Systems UCAN interface"
- ---help---
+ help
This driver supports the Theobroma Systems
UCAN USB-CAN interface.
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 2d38dbc9dd8c..d0024cb30a7b 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -12,7 +12,7 @@ config NET_DSA_BCM_SF2
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
select B53
- ---help---
+ help
This enables support for the Broadcom Starfighter 2 Ethernet
switch chips.
@@ -20,7 +20,7 @@ config NET_DSA_LOOP
tristate "DSA mock-up Ethernet switch chip support"
depends on NET_DSA
select FIXED_PHY
- ---help---
+ help
This enables support for a fake mock-up switch chip which
exercises the DSA APIs.
@@ -28,7 +28,7 @@ config NET_DSA_LANTIQ_GSWIP
tristate "Lantiq / Intel GSWIP"
depends on HAS_IOMEM && NET_DSA
select NET_DSA_TAG_GSWIP
- ---help---
+ help
This enables support for the Lantiq / Intel GSWIP 2.1 found in
the xrx200 / VR9 SoC.
@@ -36,7 +36,7 @@ config NET_DSA_MT7530
tristate "Mediatek MT7530 Ethernet switch support"
depends on NET_DSA
select NET_DSA_TAG_MTK
- ---help---
+ help
This enables support for the Mediatek MT7530 Ethernet switch
chip.
@@ -44,7 +44,7 @@ config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
depends on NET_DSA
select NET_DSA_TAG_TRAILER
- ---help---
+ help
This enables support for the Marvell 88E6060 ethernet switch
chip.
@@ -63,7 +63,7 @@ config NET_DSA_QCA8K
depends on NET_DSA
select NET_DSA_TAG_QCA
select REGMAP
- ---help---
+ help
This enables support for the Qualcomm Atheros QCA8K Ethernet
switch chips.
@@ -74,7 +74,7 @@ config NET_DSA_REALTEK_SMI
select IRQ_DOMAIN
select REALTEK_PHY
select REGMAP
- ---help---
+ help
This enables support for the Realtek SMI-based switch
chips, currently only RTL8366RB.
@@ -82,7 +82,7 @@ config NET_DSA_SMSC_LAN9303
tristate
select NET_DSA_TAG_LAN9303
select REGMAP
- ---help---
+ help
This enables support for the SMSC/Microchip LAN9303 3 port ethernet
switch chips.
@@ -91,7 +91,7 @@ config NET_DSA_SMSC_LAN9303_I2C
depends on NET_DSA && I2C
select NET_DSA_SMSC_LAN9303
select REGMAP_I2C
- ---help---
+ help
Enable access functions if the SMSC/Microchip LAN9303 is configured
for I2C managed mode.
@@ -99,7 +99,7 @@ config NET_DSA_SMSC_LAN9303_MDIO
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"
depends on NET_DSA
select NET_DSA_SMSC_LAN9303
- ---help---
+ help
Enable access functions if the SMSC/Microchip LAN9303 is configured
for MDIO managed mode.
@@ -109,7 +109,7 @@ config NET_DSA_VITESSE_VSC73XX
select FIXED_PHY
select VITESSE_PHY
select GPIOLIB
- ---help---
+ help
This enables support for the Vitesse VSC7385, VSC7388,
VSC7395 and VSC7398 SparX integrated ethernet switches.
@@ -118,7 +118,7 @@ config NET_DSA_VITESSE_VSC73XX_SPI
depends on NET_DSA
depends on SPI
select NET_DSA_VITESSE_VSC73XX
- ---help---
+ help
This enables support for the Vitesse VSC7385, VSC7388, VSC7395
and VSC7398 SparX integrated ethernet switches in SPI managed mode.
@@ -127,7 +127,7 @@ config NET_DSA_VITESSE_VSC73XX_PLATFORM
depends on NET_DSA
depends on HAS_IOMEM
select NET_DSA_VITESSE_VSC73XX
- ---help---
+ help
This enables support for the Vitesse VSC7385, VSC7388, VSC7395
and VSC7398 SparX integrated ethernet switches, connected over
a CPU-attached address bus and work in memory-mapped I/O mode.
diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig
index e3c8d715a18f..13b7e679b8b5 100644
--- a/drivers/net/dsa/qca/Kconfig
+++ b/drivers/net/dsa/qca/Kconfig
@@ -4,6 +4,6 @@ config NET_DSA_AR9331
depends on NET_DSA
select NET_DSA_TAG_AR9331
select REGMAP
- ---help---
+ help
This enables support for the Qualcomm Atheros AR9331 built-in Ethernet
switch.
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 7cc259893cb9..074b0974769c 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_3COM
bool "3Com devices"
default y
depends on ISA || EISA || PCI || PCMCIA
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_3COM
config EL3
tristate "3c509/3c579 \"EtherLink III\" support"
depends on (ISA || EISA)
- ---help---
+ help
If you have a network (Ethernet) card belonging to the 3Com
EtherLinkIII series, say Y here.
@@ -34,7 +34,7 @@ config EL3
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on ISA && ISA_DMA_API && !PPC32
- ---help---
+ help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y here.
@@ -44,7 +44,7 @@ config 3C515
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
@@ -54,7 +54,7 @@ config PCMCIA_3C574
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
@@ -65,7 +65,7 @@ config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on (PCI || EISA) && HAS_IOPORT_MAP
select MII
- ---help---
+ help
This option enables driver support for a large number of 10Mbps and
10/100Mbps EISA, PCI and Cardbus 3Com network cards:
@@ -86,7 +86,7 @@ config TYPHOON
tristate "3cr990 series \"Typhoon\" support"
depends on PCI
select CRC32
- ---help---
+ help
This option enables driver support for the 3cr990 series of cards:
3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a9478577b495..9f4b302fd2ce 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_8390
bool "National Semiconductor 8390 devices"
default y
depends on NET_VENDOR_NATSEMI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_8390
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
nearly NE2000 compatible but need a separate driver due to a few
@@ -35,7 +35,7 @@ config AX88796
select CRC32
select PHYLIB
select MDIO_BITBANG
- ---help---
+ help
AX88796 driver, using platform bus to provide
chip detection and resources
@@ -43,7 +43,7 @@ config AX88796_93CX6
bool "ASIX AX88796 external 93CX6 eeprom support"
depends on AX88796
select EEPROM_93CX6
- ---help---
+ help
Select this if your platform comes with an external 93CX6 eeprom.
config XSURF100
@@ -63,7 +63,7 @@ config HYDRA
tristate "Hydra support"
depends on ZORRO
select CRC32
- ---help---
+ help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the module
@@ -73,7 +73,7 @@ config ARM_ETHERH
tristate "I-cubed EtherH/ANT EtherM support"
depends on ARM && ARCH_ACORN
select CRC32
- ---help---
+ help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
@@ -81,7 +81,7 @@ config MAC8390
tristate "Macintosh NS 8390 based ethernet cards"
depends on MAC
select CRC32
- ---help---
+ help
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y.
@@ -89,7 +89,7 @@ config MCF8390
tristate "ColdFire NS8390 based Ethernet support"
depends on COLDFIRE
select CRC32
- ---help---
+ help
This driver is for Ethernet devices using an NS8390-compatible
chipset on many common ColdFire CPU based boards. Many of the older
Freescale dev boards use this, and some other common boards like
@@ -103,7 +103,7 @@ config NE2000
tristate "NE2000/NE1000 support"
depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
select CRC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
Many Ethernet cards without a specific driver are compatible with
the NE2000.
@@ -118,7 +118,7 @@ config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for NE2000 compatible PCI cards. It will not work
with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
support" below). If you have a PCI NE2000 network (Ethernet) card,
@@ -136,7 +136,7 @@ config APNE
tristate "PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
select CRC32
- ---help---
+ help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
@@ -147,7 +147,7 @@ config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
depends on PCMCIA
select CRC32
- ---help---
+ help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
@@ -158,7 +158,7 @@ config STNIC
tristate "National DP83902AV support"
depends on SUPERH
select CRC32
- ---help---
+ help
Support for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network Interface Controller for Twisted Pair. This
is a 10Mbit/sec Ethernet controller. Product overview and specs at
@@ -170,7 +170,7 @@ config ULTRA
tristate "SMC Ultra support"
depends on ISA
select CRC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
Important: There have been many reports that, with some motherboards
@@ -187,7 +187,7 @@ config WD80x3
tristate "WD80*3 support"
depends on ISA
select CRC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
To compile this driver as a module, choose M here. The module
@@ -197,7 +197,7 @@ config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
depends on ZORRO
select CRC32
- ---help---
+ help
This driver is for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 4ded81b27d0a..de50e8b9e656 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -7,7 +7,7 @@ menuconfig ETHERNET
bool "Ethernet driver support"
depends on NET
default y
- ---help---
+ help
This section contains all the Ethernet device drivers.
if ETHERNET
@@ -48,7 +48,7 @@ config CX_ECAT
tristate "Beckhoff CX5020 EtherCAT master support"
depends on PCI
depends on X86 || COMPILE_TEST
- ---help---
+ help
Driver for EtherCAT master module located on CCAT FPGA
that can be found on Beckhoff CX5020, and possibly other of CX
Beckhoff CX series industrial PCs.
@@ -62,7 +62,7 @@ config DNET
tristate "Dave ethernet support (DNET)"
depends on HAS_IOMEM
select PHYLIB
- ---help---
+ help
The Dave ethernet interface (DNET) is found on Qong Board FPGA.
Say Y to include support for the DNET chip.
@@ -89,7 +89,7 @@ config JME
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the PCI-Express gigabit ethernet adapters
based on JMicron JMC250 chipset.
@@ -99,20 +99,20 @@ config JME
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on MIKROTIK_RB532
- ---help---
+ help
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
- ---help---
+ help
Support for the MII0 inside the Lantiq SoC
config LANTIQ_XRX200
tristate "Lantiq / Intel xRX200 PMAC network driver"
depends on SOC_TYPE_XWAY
- ---help---
+ help
Support for the PMAC of the Gigabit switch (GSWIP) inside the
Lantiq / Intel VRX200 VDSL SoC
@@ -130,7 +130,7 @@ config FEALNX
depends on PCI
select CRC32
select MII
- ---help---
+ help
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
@@ -150,7 +150,7 @@ config ETHOC
select PHYLIB
select CRC32
select BITREVERSE
- ---help---
+ help
Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
source "drivers/net/ethernet/packetengines/Kconfig"
diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig
index 86e02da4f993..c96edc2e582f 100644
--- a/drivers/net/ethernet/adaptec/Kconfig
+++ b/drivers/net/ethernet/adaptec/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_ADAPTEC
bool "Adaptec devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config ADAPTEC_STARFIRE
depends on PCI
select CRC32
select MII
- ---help---
+ help
Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
adapter. The DuraLAN chip is used on the 64 bit PCI boards from
Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
diff --git a/drivers/net/ethernet/aeroflex/Kconfig b/drivers/net/ethernet/aeroflex/Kconfig
index 2fa0a317266b..ea4be67f787b 100644
--- a/drivers/net/ethernet/aeroflex/Kconfig
+++ b/drivers/net/ethernet/aeroflex/Kconfig
@@ -8,5 +8,5 @@ config GRETH
depends on SPARC
select PHYLIB
select CRC32
- ---help---
+ help
Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
diff --git a/drivers/net/ethernet/agere/Kconfig b/drivers/net/ethernet/agere/Kconfig
index 084c7190ce2f..d92516ae59cc 100644
--- a/drivers/net/ethernet/agere/Kconfig
+++ b/drivers/net/ethernet/agere/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_AGERE
bool "Agere devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config ET131X
tristate "Agere ET-1310 Gigabit Ethernet support"
depends on PCI
select PHYLIB
- ---help---
+ help
This driver supports Agere ET-1310 ethernet adapters.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/alacritech/Kconfig b/drivers/net/ethernet/alacritech/Kconfig
index 212f92c8e6a9..5f285e18faf7 100644
--- a/drivers/net/ethernet/alacritech/Kconfig
+++ b/drivers/net/ethernet/alacritech/Kconfig
@@ -2,7 +2,7 @@
config NET_VENDOR_ALACRITECH
bool "Alacritech devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -16,7 +16,7 @@ config SLICOSS
tristate "Alacritech Slicoss support"
depends on PCI
select CRC32
- ---help---
+ help
This driver supports Gigabit Ethernet adapters based on the
Session Layer Interface (SLIC) technology by Alacritech.
diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig
index 264a482ec31d..3e81059f8693 100644
--- a/drivers/net/ethernet/allwinner/Kconfig
+++ b/drivers/net/ethernet/allwinner/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_ALLWINNER
default y
depends on ARCH_SUNXI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this
class, say Y here.
@@ -28,7 +28,7 @@ config SUN4I_EMAC
select MII
select PHYLIB
select MDIO_SUN4I
- ---help---
+ help
Support for Allwinner A10 EMAC ethernet driver.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig
index c3f7067d2d10..cfe1f3159d61 100644
--- a/drivers/net/ethernet/alteon/Kconfig
+++ b/drivers/net/ethernet/alteon/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_ALTEON
bool "Alteon devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_ALTEON
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
- ---help---
+ help
Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
adapter. The driver allows for using the Jumbo Frame option (9000
@@ -34,7 +34,7 @@ config ACENIC
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
depends on ACENIC
- ---help---
+ help
Say Y here if you only have Tigon II based AceNICs and want to leave
out support for the older Tigon I based cards which are no longer
being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
diff --git a/drivers/net/ethernet/altera/Kconfig b/drivers/net/ethernet/altera/Kconfig
index 2690c398d2b2..914e56b91467 100644
--- a/drivers/net/ethernet/altera/Kconfig
+++ b/drivers/net/ethernet/altera/Kconfig
@@ -3,7 +3,7 @@ config ALTERA_TSE
tristate "Altera Triple-Speed Ethernet MAC support"
depends on HAS_DMA
select PHYLIB
- ---help---
+ help
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig
index cca72a75f551..c37fa393b99e 100644
--- a/drivers/net/ethernet/amazon/Kconfig
+++ b/drivers/net/ethernet/amazon/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_AMAZON
bool "Amazon Devices"
default y
- ---help---
+ help
If you have a network (Ethernet) device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config ENA_ETHERNET
tristate "Elastic Network Adapter (ENA) support"
depends on PCI_MSI && !CPU_BIG_ENDIAN
select DIMLIB
- ---help---
+ help
This driver supports Elastic Network Adapter (ENA)"
To compile this driver as a module, choose M here.
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index 9f965cdfff5c..db7d956a9c9b 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -9,7 +9,7 @@ config NET_VENDOR_AMD
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
(ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
- ---help---
+ help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -24,7 +24,7 @@ config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
- ---help---
+ help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
@@ -36,7 +36,7 @@ config AMD8111_ETH
depends on PCI
select CRC32
select MII
- ---help---
+ help
If you have an AMD 8111-based PCI LANCE ethernet card,
answer Y here.
@@ -46,7 +46,7 @@ config AMD8111_ETH
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
Some LinkSys cards are of this type.
@@ -58,7 +58,7 @@ config PCNET32
depends on PCI
select CRC32
select MII
- ---help---
+ help
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here.
@@ -68,7 +68,7 @@ config PCNET32
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
- ---help---
+ help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
@@ -79,14 +79,14 @@ config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on ARM && ARCH_EBSA110
select CRC32
- ---help---
+ help
If you wish to compile a kernel for the EBSA-110, then you should
always answer Y to this.
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
- ---help---
+ help
Say Y to include support for several Atari Ethernet adapters based
on the AMD LANCE chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
@@ -95,7 +95,7 @@ config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
- ---help---
+ help
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD LANCE chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
@@ -104,7 +104,7 @@ config HPLANCE
tristate "HP on-board LANCE support"
depends on DIO
select CRC32
- ---help---
+ help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
@@ -113,7 +113,7 @@ config MIPS_AU1X00_ENET
depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
- ---help---
+ help
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
@@ -121,7 +121,7 @@ config MVME147_NET
tristate "MVME147 (LANCE) Ethernet support"
depends on MVME147
select CRC32
- ---help---
+ help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
@@ -140,7 +140,7 @@ config PCMCIA_NMCLAN
config NI65
tristate "NI6510 support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
To compile this driver as a module, choose M here. The module
@@ -149,7 +149,7 @@ config NI65
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on (SUN3 || SUN3X)
- ---help---
+ help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
@@ -163,7 +163,7 @@ config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
- ---help---
+ help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD LANCE chipset, which is better known
@@ -181,7 +181,7 @@ config AMD_XGBE
select PHYLIB
select AMD_XGBE_HAVE_ECC if X86
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports the AMD 10GbE Ethernet device found on an
AMD SoC.
@@ -192,7 +192,7 @@ config AMD_XGBE_DCB
bool "Data Center Bridging (DCB) support"
default n
depends on AMD_XGBE && DCB
- ---help---
+ help
Say Y here to enable Data Center Bridging (DCB) support in the
driver.
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
index f78b9c841296..a4176d2ecec6 100644
--- a/drivers/net/ethernet/apple/Kconfig
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_APPLE
bool "Apple devices"
default y
depends on (PPC_PMAC && PPC32) || MAC
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
select CRC32
- ---help---
+ help
Power Macintoshes and clones with Ethernet built-in on the
motherboard will usually use a MACE (Medium Access Control for
Ethernet) interface. Say Y to include support for the MACE chip.
@@ -32,7 +32,7 @@ config MACE
config MACE_AAUI_PORT
bool "Use AAUI port instead of TP by default"
depends on MACE
- ---help---
+ help
Some Apple machines (notably the Apple Network Server) which use the
MACE ethernet chip have an Apple AUI port (small 15-pin connector),
instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
@@ -44,7 +44,7 @@ config BMAC
tristate "BMAC (G3 ethernet) support"
depends on PPC_PMAC && PPC32
select CRC32
- ---help---
+ help
Say Y for support of BMAC Ethernet interfaces. These are used on G3
computers.
@@ -55,7 +55,7 @@ config MACMACE
tristate "Macintosh (AV) onboard MACE ethernet"
depends on MAC
select CRC32
- ---help---
+ help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
the 660AV and 840AV Macintosh. If you have one of these Macintoshes
say Y here.
diff --git a/drivers/net/ethernet/aquantia/Kconfig b/drivers/net/ethernet/aquantia/Kconfig
index 76a44b2546ff..efb33c078a3c 100644
--- a/drivers/net/ethernet/aquantia/Kconfig
+++ b/drivers/net/ethernet/aquantia/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_AQUANTIA
bool "aQuantia devices"
default y
- ---help---
+ help
Set this to y if you have an Ethernet network cards that uses the aQuantia
AQC107/AQC108 chipset.
@@ -21,7 +21,7 @@ config AQTION
depends on PCI
depends on X86_64 || ARM64 || COMPILE_TEST
depends on MACSEC || MACSEC=n
- ---help---
+ help
This enables the support for the aQuantia AQtion(tm) Ethernet card.
endif # NET_VENDOR_AQUANTIA
diff --git a/drivers/net/ethernet/arc/Kconfig b/drivers/net/ethernet/arc/Kconfig
index 45c663d8b9aa..37a41773dd43 100644
--- a/drivers/net/ethernet/arc/Kconfig
+++ b/drivers/net/ethernet/arc/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_ARC
bool "ARC devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -27,7 +27,7 @@ config ARC_EMAC
select ARC_EMAC_CORE
depends on OF_IRQ && OF_NET
depends on ARC || COMPILE_TEST
- ---help---
+ help
On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
non-standard on-chip ethernet device ARC EMAC 10/100 is used.
Say Y here if you have such a board. If unsure, say N.
@@ -37,7 +37,7 @@ config EMAC_ROCKCHIP
select ARC_EMAC_CORE
depends on OF_IRQ && OF_NET && REGULATOR
depends on ARCH_ROCKCHIP || COMPILE_TEST
- ---help---
+ help
Support for Rockchip RK3036/RK3066/RK3188 EMAC ethernet controllers.
This selects Rockchip SoC glue layer support for the
emac device driver. This driver is used for RK3036/RK3066/RK3188
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
index 2720bde5034e..fb803bf92ded 100644
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_ATHEROS
bool "Atheros devices"
default y
depends on (PCI || ATH79)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -30,7 +30,7 @@ config ATL2
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros L2 fast ethernet adapter.
To compile this driver as a module, choose M here. The module
@@ -41,7 +41,7 @@ config ATL1
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros/Attansic L1 gigabit ethernet
adapter.
@@ -53,7 +53,7 @@ config ATL1E
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros L1E gigabit ethernet adapter.
To compile this driver as a module, choose M here. The module
@@ -64,7 +64,7 @@ config ATL1C
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver supports the Atheros L1C gigabit ethernet adapter.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 2a69c0d06f3c..7fb42f388d59 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_BROADCOM
default y
depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
SIBYTE_SB1xxx_SOC
- ---help---
+ help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -25,7 +25,7 @@ config B44
select SSB
select MII
select PHYLIB
- ---help---
+ help
If you have a network (Ethernet) controller of this type, say Y
or M here.
@@ -79,7 +79,7 @@ config BNX2
depends on PCI
select CRC32
select FW_LOADER
- ---help---
+ help
This driver supports QLogic bnx2 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
@@ -90,7 +90,7 @@ config CNIC
depends on PCI && (IPV6 || IPV6=n)
select BNX2
select UIO
- ---help---
+ help
This driver supports offload features of QLogic bnx2 gigabit
Ethernet cards.
@@ -101,7 +101,7 @@ config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
- ---help---
+ help
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
@@ -115,7 +115,7 @@ config TIGON3
depends on PCI
select PHYLIB
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
@@ -125,7 +125,7 @@ config TIGON3_HWMON
bool "Broadcom Tigon3 HWMON support"
default y
depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose the thermal sensor on Tigon3 devices.
config BNX2X
@@ -136,7 +136,7 @@ config BNX2X
select ZLIB_INFLATE
select LIBCRC32C
select MDIO
- ---help---
+ help
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
@@ -145,7 +145,7 @@ config BNX2X_SRIOV
bool "Broadcom 578xx and 57712 SR-IOV support"
depends on BNX2X && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support in the 578xx and 57712 products. This
allows for virtual function acceleration in virtual environments.
@@ -164,7 +164,7 @@ config BGMAC_BCMA
select BGMAC
select PHYLIB
select FIXED_PHY
- ---help---
+ help
This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
They can be found on BCM47xx SoCs and provide gigabit ethernet.
In case of using this driver on BCM4706 it's also requires to enable
@@ -178,7 +178,7 @@ config BGMAC_PLATFORM
select PHYLIB
select FIXED_PHY
default ARCH_BCM_IPROC
- ---help---
+ help
Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
controller through the generic platform interface
@@ -203,7 +203,7 @@ config BNXT
select NET_DEVLINK
select PAGE_POOL
select DIMLIB
- ---help---
+ help
This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
Ethernet cards. To compile this driver as a module, choose M here:
the module will be called bnxt_en. This is recommended.
@@ -212,7 +212,7 @@ config BNXT_SRIOV
bool "Broadcom NetXtreme-C/E SR-IOV support"
depends on BNXT && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support in the NetXtreme-C/E products. This
allows for virtual function acceleration in virtual environments.
@@ -221,7 +221,7 @@ config BNXT_FLOWER_OFFLOAD
bool "TC Flower offload support for NetXtreme-C/E"
depends on BNXT
default y
- ---help---
+ help
This configuration parameter enables TC Flower packet classifier
offload for eswitch. This option enables SR-IOV switchdev eswitch
offload.
@@ -230,7 +230,7 @@ config BNXT_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on BNXT && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -240,7 +240,7 @@ config BNXT_HWMON
bool "Broadcom NetXtreme-C/E HWMON support"
default y
depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
devices, via the hwmon sysfs interface.
diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig
index d4564c7a279c..fb4c3cdf7233 100644
--- a/drivers/net/ethernet/brocade/Kconfig
+++ b/drivers/net/ethernet/brocade/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_BROCADE
bool "QLogic BR-series devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/brocade/bna/Kconfig b/drivers/net/ethernet/brocade/bna/Kconfig
index b124a628f86a..0a48ad93ed6c 100644
--- a/drivers/net/ethernet/brocade/bna/Kconfig
+++ b/drivers/net/ethernet/brocade/bna/Kconfig
@@ -6,7 +6,7 @@
config BNA
tristate "QLogic BR-series 1010/1020/1860 10Gb Ethernet Driver support"
depends on PCI
- ---help---
+ help
This driver supports QLogic BR-series 1010/1020/1860 10Gb CEE capable
Ethernet cards.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 2c4c12b03502..85858163bac5 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CADENCE
bool "Cadence devices"
depends on HAS_IOMEM
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
If unsure, say Y.
@@ -23,7 +23,7 @@ config MACB
tristate "Cadence MACB/GEM support"
depends on HAS_DMA && COMMON_CLK
select PHYLINK
- ---help---
+ help
The Cadence MACB ethernet interface is found on many Atmel AT32 and
AT91 parts. This driver also supports the Cadence GEM (Gigabit
Ethernet MAC found in some ARM SoC devices). Say Y to include
@@ -37,13 +37,13 @@ config MACB_USE_HWSTAMP
depends on MACB
depends on PTP_1588_CLOCK
default y
- ---help---
+ help
Enable IEEE 1588 Precision Time Protocol (PTP) support for MACB.
config MACB_PCI
tristate "Cadence PCI MACB/GEM support"
depends on MACB && PCI
- ---help---
+ help
This is PCI wrapper for MACB driver.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig
index 4520e7ee00fe..4875cdae622e 100644
--- a/drivers/net/ethernet/cavium/Kconfig
+++ b/drivers/net/ethernet/cavium/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_CAVIUM
bool "Cavium ethernet drivers"
default y
- ---help---
+ help
Select this option if you want enable Cavium network support.
If you have a Cavium SoC or network adapter, say Y.
@@ -17,7 +17,7 @@ config THUNDER_NIC_PF
tristate "Thunder Physical function driver"
depends on 64BIT && PCI
select THUNDER_NIC_BGX
- ---help---
+ help
This driver supports Thunder's NIC physical function.
The NIC provides the controller and DMA engines to
move network traffic to/from the memory. The NIC
@@ -29,7 +29,7 @@ config THUNDER_NIC_VF
tristate "Thunder Virtual function driver"
imply CAVIUM_PTP
depends on 64BIT && PCI
- ---help---
+ help
This driver supports Thunder's NIC virtual function
config THUNDER_NIC_BGX
@@ -38,7 +38,7 @@ config THUNDER_NIC_BGX
select PHYLIB
select MDIO_THUNDER if PCI
select THUNDER_NIC_RGX
- ---help---
+ help
This driver supports programming and controlling of MAC
interface from NIC physical function driver.
@@ -47,7 +47,7 @@ config THUNDER_NIC_RGX
depends on 64BIT && PCI
select PHYLIB
select MDIO_THUNDER if PCI
- ---help---
+ help
This driver supports configuring XCV block of RGX interface
present on CN81XX chip.
@@ -55,7 +55,7 @@ config CAVIUM_PTP
tristate "Cavium PTP coprocessor as PTP clock"
depends on 64BIT && PCI
depends on PTP_1588_CLOCK
- ---help---
+ help
This driver adds support for the Precision Time Protocol Clocks and
Timestamping coprocessor (PTP) found on Cavium processors.
PTP provides timestamping mechanism that is suitable for use in IEEE 1588
@@ -70,7 +70,7 @@ config LIQUIDIO
select FW_LOADER
select LIBCRC32C
select NET_DEVLINK
- ---help---
+ help
This driver supports Cavium LiquidIO Intelligent Server Adapters
based on CN66XX, CN68XX and CN23XX chips.
@@ -92,7 +92,7 @@ config LIQUIDIO_VF
tristate "Cavium LiquidIO VF support"
depends on 64BIT && PCI_MSI
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Cavium LiquidIO Intelligent Server Adapter
based on CN23XX chips.
diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
index 82cdfa51ce37..b7f43254598f 100644
--- a/drivers/net/ethernet/chelsio/Kconfig
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CHELSIO
bool "Chelsio devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config CHELSIO_T1
depends on PCI
select CRC32
select MDIO
- ---help---
+ help
This driver supports Chelsio gigabit and 10-gigabit
Ethernet cards. More information about adapter features and
performance tuning is in
@@ -42,7 +42,7 @@ config CHELSIO_T1
config CHELSIO_T1_1G
bool "Chelsio gigabit Ethernet support"
depends on CHELSIO_T1
- ---help---
+ help
Enables support for Chelsio's gigabit Ethernet PCI cards. If you
are using only 10G cards say 'N' here.
@@ -51,7 +51,7 @@ config CHELSIO_T3
depends on PCI && INET
select FW_LOADER
select MDIO
- ---help---
+ help
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
@@ -72,7 +72,7 @@ config CHELSIO_T4
select FW_LOADER
select MDIO
select ZLIB_DEFLATE
- ---help---
+ help
This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet
adapter and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb
Ethernet adapters.
@@ -92,7 +92,7 @@ config CHELSIO_T4_DCB
bool "Data Center Bridging (DCB) Support for Chelsio T4/T5/T6 cards"
default n
depends on CHELSIO_T4 && DCB
- ---help---
+ help
Enable DCB support through rtNetlink interface.
Say Y here if you want to enable Data Center Bridging (DCB) support
in the driver.
@@ -103,7 +103,7 @@ config CHELSIO_T4_FCOE
bool "Fibre Channel over Ethernet (FCoE) Support for Chelsio T5 cards"
default n
depends on CHELSIO_T4 && CHELSIO_T4_DCB && FCOE
- ---help---
+ help
Enable FCoE offload features.
Say Y here if you want to enable Fibre Channel over Ethernet (FCoE) support
in the driver.
@@ -113,7 +113,7 @@ config CHELSIO_T4_FCOE
config CHELSIO_T4VF
tristate "Chelsio Communications T4/T5/T6 Virtual Function Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet
adapters and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb
Ethernet adapters with PCI-E SR-IOV Virtual Functions.
@@ -131,7 +131,7 @@ config CHELSIO_T4VF
config CHELSIO_LIB
tristate
- ---help---
+ help
Common library for Chelsio drivers.
endif # NET_VENDOR_CHELSIO
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 8d845f5ee0c5..7cf4526596f3 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CIRRUS
bool "Cirrus devices"
default y
depends on ISA || EISA || ARM || MAC
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config CS89x0
tristate "CS89x0 support"
depends on ISA || EISA || ARM
depends on !PPC32
- ---help---
+ help
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the file
<file:Documentation/networking/device_drivers/cirrus/cs89x0.rst>.
@@ -51,7 +51,7 @@ config EP93XX_ETH
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on MAC
- ---help---
+ help
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y here.
diff --git a/drivers/net/ethernet/cisco/Kconfig b/drivers/net/ethernet/cisco/Kconfig
index ee5b7b3868c7..18c3a0718d6f 100644
--- a/drivers/net/ethernet/cisco/Kconfig
+++ b/drivers/net/ethernet/cisco/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_CISCO
bool "Cisco devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/cisco/enic/Kconfig b/drivers/net/ethernet/cisco/enic/Kconfig
index edaae706a102..ad80c0fa96a6 100644
--- a/drivers/net/ethernet/cisco/enic/Kconfig
+++ b/drivers/net/ethernet/cisco/enic/Kconfig
@@ -6,5 +6,5 @@
config ENIC
tristate "Cisco VIC Ethernet NIC Support"
depends on PCI
- ---help---
+ help
This enables the support for the Cisco VIC Ethernet card.
diff --git a/drivers/net/ethernet/cortina/Kconfig b/drivers/net/ethernet/cortina/Kconfig
index 89bc4579724d..ac8cb5744a87 100644
--- a/drivers/net/ethernet/cortina/Kconfig
+++ b/drivers/net/ethernet/cortina/Kconfig
@@ -4,7 +4,7 @@
config NET_VENDOR_CORTINA
bool "Cortina Gemini devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -17,7 +17,7 @@ config GEMINI_ETHERNET
depends on HAS_IOMEM
select PHYLIB
select CRC32
- ---help---
+ help
This driver supports StorLink SL351x (Gemini) dual Gigabit Ethernet.
endif # NET_VENDOR_CORTINA
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
index a321a7144fb0..76247103e566 100644
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@@ -8,7 +8,7 @@ config DM9000
depends on ARM || MIPS || COLDFIRE || NIOS2
select CRC32
select MII
- ---help---
+ help
Support for DM9000 chipset.
To compile this driver as a module, choose M here. The module
@@ -17,7 +17,7 @@ config DM9000
config DM9000_FORCE_SIMPLE_PHY_POLL
bool "Force simple NSR based PHY polling"
depends on DM9000
- ---help---
+ help
This configuration forces the DM9000 to use the NSR's LinkStatus
bit to determine if the link is up or down instead of the more
costly MII PHY reads. Note, this will not work if the chip is
diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig
index df1eeb04d5ea..9e5e5f10bd19 100644
--- a/drivers/net/ethernet/dec/Kconfig
+++ b/drivers/net/ethernet/dec/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_DEC
bool "Digital Equipment devices"
default y
depends on PCI || EISA || CARDBUS
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 177f36f4b89d..8afc5942179a 100644
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -6,7 +6,7 @@
config NET_TULIP
bool "DEC - Tulip devices"
depends on (PCI || EISA || CARDBUS)
- ---help---
+ help
This selects the "Tulip" family of EISA/PCI network cards.
if NET_TULIP
@@ -15,7 +15,7 @@ config DE2104X
tristate "Early DECchip Tulip (dc2104x) PCI support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040 (Tulip series) chips. Some LinkSys PCI cards are
@@ -32,7 +32,7 @@ config DE2104X_DSL
depends on DE2104X
range 0 31
default 0
- ---help---
+ help
Setting this value allows to align ring buffer descriptors into their
own cache lines. Value of 4 corresponds to the typical 32 byte line
(the descriptor is 16 bytes). This is necessary on systems that lack
@@ -43,7 +43,7 @@ config TULIP
tristate "DECchip Tulip (dc2114x) PCI support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21140 (Tulip series) chips. Some LinkSys PCI cards are
@@ -58,7 +58,7 @@ config TULIP
config TULIP_MWI
bool "New bus configuration"
depends on TULIP
- ---help---
+ help
This configures your Tulip card specifically for the card and
system cache line size type you are using.
@@ -69,7 +69,7 @@ config TULIP_MWI
config TULIP_MMIO
bool "Use PCI shared mem for NIC registers"
depends on TULIP
- ---help---
+ help
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
@@ -78,7 +78,7 @@ config TULIP_MMIO
config TULIP_NAPI
bool "Use RX polling (NAPI)"
depends on TULIP
- ---help---
+ help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
@@ -92,7 +92,7 @@ config TULIP_NAPI
config TULIP_NAPI_HW_MITIGATION
bool "Use Interrupt Mitigation"
depends on TULIP_NAPI
- ---help---
+ help
Use HW to reduce RX interrupts. Not strictly necessary since NAPI
reduces RX interrupts by itself. Interrupt mitigation reduces RX
interrupts even at low levels of traffic at the cost of a small
@@ -109,7 +109,7 @@ config DE4X5
depends on (PCI || EISA)
depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
select CRC32
- ---help---
+ help
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
These include the DE425, DE434, DE435, DE450 and DE500 models. If
you have a network card of this type, say Y. More specific
@@ -124,7 +124,7 @@ config WINBOND_840
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
More specific information and updates are available from
@@ -134,7 +134,7 @@ config DM9102
tristate "Davicom DM910x/DM980x support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
Davicom (<http://www.davicom.com.tw/>). If you have such a network
(Ethernet) card, say Y. Some information is contained in the file
@@ -147,7 +147,7 @@ config ULI526X
tristate "ULi M526x controller support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
(<http://www.nvidia.com/page/uli_drivers.html>).
@@ -157,7 +157,7 @@ config ULI526X
config PCMCIA_XIRCOM
tristate "Xircom CardBus support"
depends on CARDBUS
- ---help---
+ help
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
index 1362658a3030..0d77f84c8e7b 100644
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_DLINK
bool "D-Link devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config DL2K
tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards,
which includes
D-Link DGE-550T Gigabit Ethernet Adapter.
@@ -37,7 +37,7 @@ config SUNDANCE
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver is for the Sundance "Alta" chip.
More specific information and updates are available from
<http://www.scyld.com/network/sundance.html>.
@@ -45,7 +45,7 @@ config SUNDANCE
config SUNDANCE_MMIO
bool "Use MMIO instead of PIO"
depends on SUNDANCE
- ---help---
+ help
Enable memory-mapped I/O for interaction with Sundance NIC registers.
Do NOT enable this by default, PIO (enabled when MMIO is disabled)
is known to solve bugs on certain chips.
diff --git a/drivers/net/ethernet/emulex/Kconfig b/drivers/net/ethernet/emulex/Kconfig
index 22c143f2d787..5797a76dc731 100644
--- a/drivers/net/ethernet/emulex/Kconfig
+++ b/drivers/net/ethernet/emulex/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_EMULEX
bool "Emulex devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/ezchip/Kconfig b/drivers/net/ethernet/ezchip/Kconfig
index 6db75fd2f9af..38aa824efb25 100644
--- a/drivers/net/ethernet/ezchip/Kconfig
+++ b/drivers/net/ethernet/ezchip/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_EZCHIP
bool "EZchip devices"
default y
- ---help---
+ help
If you have a network (Ethernet) device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config EZCHIP_NPS_MANAGEMENT_ENET
tristate "EZchip NPS management enet support"
depends on OF_IRQ && OF_NET
depends on HAS_IOMEM
- ---help---
+ help
Simple LAN device for debug or management purposes.
Device supports interrupts for RX and TX(completion).
Device does not have DMA ability.
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index 73e4f2648e49..c2677ec0564d 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_FARADAY
bool "Faraday devices"
default y
depends on ARM || NDS32 || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config FTMAC100
depends on ARM || NDS32 || COMPILE_TEST
depends on !64BIT || BROKEN
select MII
- ---help---
+ help
This driver supports the FTMAC100 10/100 Ethernet controller
from Faraday. It is used on Faraday A320, Andes AG101 and some
other ARM/NDS32 SoC's.
@@ -33,7 +33,7 @@ config FTGMAC100
depends on !64BIT || BROKEN
select PHYLIB
select MDIO_ASPEED if MACH_ASPEED_G6
- ---help---
+ help
This driver supports the FTGMAC100 Gigabit Ethernet controller
from Faraday. It is used on Faraday A369, Andes AG102 and some
other ARM/NDS32 SoC's.
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index bfc6bfe94d0a..a1d53ddf1593 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -10,7 +10,7 @@ config NET_VENDOR_FREESCALE
M523x || M527x || M5272 || M528x || M520x || M532x || \
ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \
ARCH_LAYERSCAPE || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -27,7 +27,7 @@ config FEC
default ARCH_MXC || SOC_IMX28 if ARM
select PHYLIB
imply PTP_1588_CLOCK
- ---help---
+ help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
@@ -37,7 +37,7 @@ config FEC_MPC52xx
select CRC32
select PHYLIB
select PPC_BESTCOMM_FEC
- ---help---
+ help
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
If compiled as module, it will be called fec_mpc52xx.
@@ -46,7 +46,7 @@ config FEC_MPC52xx_MDIO
bool "FEC MPC52xx MDIO bus driver"
depends on FEC_MPC52xx
default y
- ---help---
+ help
The MPC5200's FEC can connect to the Ethernet either with
an external MII PHY chip or 10 Mbps 7-wire interface
(Motorola? industry standard).
@@ -60,7 +60,7 @@ source "drivers/net/ethernet/freescale/fman/Kconfig"
config FSL_PQ_MDIO
tristate "Freescale PQ MDIO"
select PHYLIB
- ---help---
+ help
This driver supports the MDIO bus used by the gianfar and UCC drivers.
config FSL_XGMAC_MDIO
@@ -68,7 +68,7 @@ config FSL_XGMAC_MDIO
select PHYLIB
depends on OF
select OF_MDIO
- ---help---
+ help
This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and
on the FMan mEMAC (which supports both Clauses 22 and 45)
@@ -78,7 +78,7 @@ config UCC_GETH
select FSL_PQ_MDIO
select PHYLIB
select FIXED_PHY
- ---help---
+ help
This driver supports the Gigabit Ethernet mode of the QUICC Engine,
which is available on some Freescale SOCs.
@@ -93,7 +93,7 @@ config GIANFAR
select PHYLIB
select FIXED_PHY
select CRC32
- ---help---
+ help
This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
and MPC86xx family of chips, the eTSEC on LS1021A and the FEC
on the 8540.
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index 0a54c7e0e4ae..626ec58a0afc 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -5,7 +5,7 @@ menuconfig FSL_DPAA_ETH
select PHYLIB
select FIXED_PHY
select FSL_FMAN_MAC
- ---help---
+ help
Data Path Acceleration Architecture Ethernet driver,
supporting the Freescale QorIQ chips.
Depends on Freescale Buffer Manager and Queue Manager
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index cee99f20d2c2..0a1400cb410a 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_FUJITSU
bool "Fujitsu devices"
default y
depends on PCMCIA
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
depends on PCMCIA
select CRC32
- ---help---
+ help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
PCMCIA (PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 2fff43509098..44f9279cdde1 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_HISILICON
default y
depends on OF || ACPI
depends on ARM || ARM64 || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -42,7 +42,7 @@ config HIP04_ETH
select MARVELL_PHY
select MFD_SYSCON
select HNS_MDIO
- ---help---
+ help
If you wish to compile a kernel for a hardware with hisilicon p04 SoC and
want to use the internal ethernet then you should answer Y to this.
@@ -59,13 +59,13 @@ config HI13X1_GMAC
config HNS_MDIO
tristate
select PHYLIB
- ---help---
+ help
This selects the HNS MDIO support. It is needed by HNS_DSAF to access
the PHY
config HNS
tristate
- ---help---
+ help
This selects the framework support for Hisilicon Network Subsystem. It
is needed by any driver which provides HNS acceleration engine or make
use of the engine
@@ -74,7 +74,7 @@ config HNS_DSAF
tristate "Hisilicon HNS DSAF device Support"
select HNS
select HNS_MDIO
- ---help---
+ help
This selects the DSAF (Distributed System Area Frabric) network
acceleration engine support. The engine is used in Hisilicon hip05,
Hi1610 and further ICT SoC
@@ -83,14 +83,14 @@ config HNS_ENET
tristate "Hisilicon HNS Ethernet Device Support"
select PHYLIB
select HNS
- ---help---
+ help
This selects the general ethernet driver for HNS. This module make
use of any HNS AE driver, such as HNS_DSAF
config HNS3
tristate "Hisilicon Network Subsystem Support HNS3 (Framework)"
depends on PCI
- ---help---
+ help
This selects the framework support for Hisilicon Network Subsystem 3.
This layer facilitates clients like ENET, RoCE and user-space ethernet
drivers(like ODP)to register with HNAE devices and their associated
@@ -102,7 +102,7 @@ config HNS3_HCLGE
tristate "Hisilicon HNS3 HCLGE Acceleration Engine & Compatibility Layer Support"
default m
depends on PCI_MSI
- ---help---
+ help
This selects the HNS3_HCLGE network acceleration engine & its hardware
compatibility layer. The engine would be used in Hisilicon hip08 family of
SoCs and further upcoming SoCs.
@@ -111,7 +111,7 @@ config HNS3_DCB
bool "Hisilicon HNS3 Data Center Bridge Support"
default n
depends on HNS3_HCLGE && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the HNS3 driver.
If unsure, say N.
@@ -120,7 +120,7 @@ config HNS3_HCLGEVF
tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support"
depends on PCI_MSI
depends on HNS3_HCLGE
- ---help---
+ help
This selects the HNS3 VF drivers network acceleration engine & its hardware
compatibility layer. The engine would be used in Hisilicon hip08 family of
SoCs and further upcoming SoCs.
@@ -130,7 +130,7 @@ config HNS3_ENET
default m
depends on 64BIT && PCI
depends on INET
- ---help---
+ help
This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08
family of SoCs. This module depends upon HNAE3 driver to access the HNAE3
devices and their associated operations.
diff --git a/drivers/net/ethernet/huawei/Kconfig b/drivers/net/ethernet/huawei/Kconfig
index bdcbface62d7..c05fce15eb51 100644
--- a/drivers/net/ethernet/huawei/Kconfig
+++ b/drivers/net/ethernet/huawei/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_HUAWEI
bool "Huawei devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
diff --git a/drivers/net/ethernet/huawei/hinic/Kconfig b/drivers/net/ethernet/huawei/hinic/Kconfig
index cabc2f72d9d7..936e2dd3bb13 100644
--- a/drivers/net/ethernet/huawei/hinic/Kconfig
+++ b/drivers/net/ethernet/huawei/hinic/Kconfig
@@ -6,7 +6,7 @@
config HINIC
tristate "Huawei Intelligent PCIE Network Interface Card"
depends on (PCI_MSI && (X86 || ARM64))
- ---help---
+ help
This driver supports HiNIC PCIE Ethernet cards.
To compile this driver as part of the kernel, choose Y here.
If unsure, choose N.
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index 33faff985438..3b5fab123824 100644
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_I825XX
bool "Intel (82586/82593/82596) devices"
default y
depends on NET_VENDOR_INTEL
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question does not directly affect the
@@ -20,14 +20,14 @@ if NET_VENDOR_I825XX
config ARM_ETHER1
tristate "Acorn Ether1 support"
depends on ARM && ARCH_ACORN
- ---help---
+ help
If you have an Acorn system with one of these (AKA25) network cards,
you should say Y to this option if you wish to use it with Linux.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on BVME6000
- ---help---
+ help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel.
@@ -36,14 +36,14 @@ config BVME6000_NET
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
- ---help---
+ help
Say Y here to support the builtin Intel 82596 ethernet controller
found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on MVME16x
- ---help---
+ help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel.
@@ -52,14 +52,14 @@ config MVME16x_NET
config SNI_82596
tristate "SNI RM ethernet"
depends on SNI_RM
- ---help---
+ help
Say Y here to support the on-board Intel 82596 ethernet controller
built into SNI RM machines.
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on SUN3
- ---help---
+ help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
diff --git a/drivers/net/ethernet/ibm/Kconfig b/drivers/net/ethernet/ibm/Kconfig
index a95d941360f8..c0c112d95b89 100644
--- a/drivers/net/ethernet/ibm/Kconfig
+++ b/drivers/net/ethernet/ibm/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_IBM
bool "IBM devices"
default y
depends on PPC_PSERIES || PPC_DCR || (IBMEBUS && SPARSEMEM)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_IBM
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
depends on PPC_PSERIES
- ---help---
+ help
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
@@ -32,7 +32,7 @@ source "drivers/net/ethernet/ibm/emac/Kconfig"
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && SPARSEMEM
- ---help---
+ help
This driver supports the IBM pSeries eHEA ethernet adapter.
To compile the driver as a module, choose M here. The module
@@ -41,7 +41,7 @@ config EHEA
config IBMVNIC
tristate "IBM Virtual NIC support"
depends on PPC_PSERIES
- ---help---
+ help
This driver supports Virtual NIC adapters on IBM i and IBM System p
systems.
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index ad34e4335df2..48a8f9aa1dd0 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_INTEL
bool "Intel devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config E100
tristate "Intel(R) PRO/100+ support"
depends on PCI
select MII
- ---help---
+ help
This driver supports Intel(R) PRO/100 family of adapters.
To verify that your adapter is supported, find the board ID number
on the adapter. Look for a label that has a barcode and a number
@@ -42,7 +42,7 @@ config E100
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -60,7 +60,7 @@ config E1000E
depends on PCI && (!SPARC32 || BROKEN)
select CRC32
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
use the regular e1000 driver For more information on how to
@@ -79,7 +79,7 @@ config E1000E_HWTS
bool "Support HW cross-timestamp on PCH devices"
default y
depends on E1000E && X86
- ---help---
+ help
Say Y to enable hardware supported cross-timestamping on PCH
devices. The cross-timestamp is available through the PTP clock
driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
@@ -90,7 +90,7 @@ config IGB
imply PTP_1588_CLOCK
select I2C
select I2C_ALGOBIT
- ---help---
+ help
This driver supports Intel(R) 82575/82576 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -107,7 +107,7 @@ config IGB_HWMON
bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
default y
depends on IGB && HWMON && !(IGB=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose thermal sensor data on Intel devices.
Some of our devices contain thermal sensors, both external and internal.
@@ -118,7 +118,7 @@ config IGB_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
@@ -126,7 +126,7 @@ config IGB_DCA
config IGBVF
tristate "Intel(R) 82576 Virtual Function Ethernet support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) 82576 virtual functions. For more
information on how to identify your adapter, go to the Adapter &
Driver ID Guide that can be located at:
@@ -142,7 +142,7 @@ config IGBVF
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
- ---help---
+ help
This driver supports Intel(R) PRO/10GbE family of adapters for
PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
instead. For more information on how to identify your adapter, go
@@ -162,7 +162,7 @@ config IXGBE
select MDIO
select PHYLIB
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -179,7 +179,7 @@ config IXGBE_HWMON
bool "Intel(R) 10GbE PCI Express adapters HWMON support"
default y
depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
- ---help---
+ help
Say Y if you want to expose the thermal sensor data on some of
our cards, via a hwmon sysfs interface.
@@ -187,7 +187,7 @@ config IXGBE_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
@@ -196,7 +196,7 @@ config IXGBE_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on IXGBE && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -208,13 +208,13 @@ config IXGBE_IPSEC
depends on XFRM_OFFLOAD
default y
select XFRM_ALGO
- ---help---
+ help
Enable support for IPSec offload in ixgbe.ko
config IXGBEVF
tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
depends on PCI_MSI
- ---help---
+ help
This driver supports Intel(R) PCI Express virtual functions for the
Intel(R) ixgbe driver. For more information on how to identify your
adapter, go to the Adapter & Driver ID Guide that can be located at:
@@ -234,14 +234,14 @@ config IXGBEVF_IPSEC
depends on XFRM_OFFLOAD
default y
select XFRM_ALGO
- ---help---
+ help
Enable support for IPSec offload in ixgbevf.ko
config I40E
tristate "Intel(R) Ethernet Controller XL710 Family support"
imply PTP_1588_CLOCK
depends on PCI
- ---help---
+ help
This driver supports Intel(R) Ethernet Controller XL710 Family of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -258,7 +258,7 @@ config I40E_DCB
bool "Data Center Bridging (DCB) Support"
default n
depends on I40E && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -272,7 +272,7 @@ config I40EVF
tristate "Intel(R) Ethernet Adaptive Virtual Function support"
select IAVF
depends on PCI_MSI
- ---help---
+ help
This driver supports virtual functions for Intel XL710,
X710, X722, XXV710, and all devices advertising support for
Intel Ethernet Adaptive Virtual Function devices. For more
@@ -295,7 +295,7 @@ config ICE
default n
depends on PCI_MSI
select NET_DEVLINK
- ---help---
+ help
This driver supports Intel(R) Ethernet Connection E800 Series of
devices. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide that can be located at:
@@ -313,7 +313,7 @@ config FM10K
default n
depends on PCI_MSI
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Intel(R) FM10000 Ethernet Switch Host
Interface. For more information on how to identify your adapter,
go to the Adapter & Driver ID Guide that can be located at:
@@ -330,7 +330,7 @@ config IGC
tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
default n
depends on PCI
- ---help---
+ help
This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
family of adapters.
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index 3d5caea096fb..cd8ddd1ef6f2 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MARVELL
bool "Marvell devices"
default y
depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config MV643XX_ETH
depends on INET
select PHYLIB
select MVMDIO
- ---help---
+ help
This driver supports the gigabit ethernet MACs in the
Marvell Discovery PPC/MIPS chipset family (MV643XX) and
in the Marvell Orion ARM SoC family.
@@ -35,7 +35,7 @@ config MVMDIO
tristate "Marvell MDIO interface support"
depends on HAS_IOMEM
select PHYLIB
- ---help---
+ help
This driver supports the MDIO interface found in the network
interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
Dove, Armada 370 and Armada XP).
@@ -46,7 +46,7 @@ config MVNETA_BM_ENABLE
tristate "Marvell Armada 38x/XP network interface BM support"
depends on MVNETA
depends on !64BIT
- ---help---
+ help
This driver supports auxiliary block of the network
interface units in the Marvell ARMADA XP and ARMADA 38x SoC
family, which is called buffer manager.
@@ -62,7 +62,7 @@ config MVNETA
select MVMDIO
select PHYLINK
select PAGE_POOL
- ---help---
+ help
This driver supports the network interface units in the
Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
ARMADA 37xx SoC family.
@@ -87,7 +87,7 @@ config MVPP2
depends on ARCH_MVEBU || COMPILE_TEST
select MVMDIO
select PHYLINK
- ---help---
+ help
This driver supports the network interface units in the
Marvell ARMADA 375, 7K and 8K SoCs.
@@ -96,7 +96,7 @@ config PXA168_ETH
depends on HAS_IOMEM
depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
select PHYLIB
- ---help---
+ help
This driver supports the pxa168 Ethernet ports.
To compile this driver as a module, choose M here. The module
@@ -106,7 +106,7 @@ config SKGE
tristate "Marvell Yukon Gigabit Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
and related Gigabit Ethernet adapters. It is a new smaller driver
with better performance and more complete ethtool support.
@@ -127,7 +127,7 @@ config SKGE
config SKGE_DEBUG
bool "Debugging interface"
depends on SKGE && DEBUG_FS
- ---help---
+ help
This option adds the ability to dump driver state for debugging.
The file /sys/kernel/debug/skge/ethX displays the state of the internal
transmit and receive rings.
@@ -137,7 +137,7 @@ config SKGE_DEBUG
config SKGE_GENESIS
bool "Support for older SysKonnect Genesis boards"
depends on SKGE
- ---help---
+ help
This enables support for the older and uncommon SysKonnect Genesis
chips, which support MII via an external transceiver, instead of
an internal one. Disabling this option will save some memory
@@ -147,7 +147,7 @@ config SKY2
tristate "Marvell Yukon 2 support"
depends on PCI
select CRC32
- ---help---
+ help
This driver supports Gigabit Ethernet adapters based on the
Marvell Yukon 2 chipset:
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
@@ -162,7 +162,7 @@ config SKY2
config SKY2_DEBUG
bool "Debugging interface"
depends on SKY2 && DEBUG_FS
- ---help---
+ help
This option adds the ability to dump driver state for debugging.
The file /sys/kernel/debug/sky2/ethX displays the state of the internal
transmit and receive rings.
diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig
index d9dfb614daa6..543a1d047567 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Kconfig
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
@@ -21,7 +21,7 @@ config NDC_DIS_DYNAMIC_CACHING
bool "Disable caching of dynamic entries in NDC"
depends on OCTEONTX2_AF
default n
- ---help---
+ help
This config option disables caching of dynamic entries such as NIX SQEs
, NPA stack pages etc in NDC. Also locks down NIX SQ/CQ/RQ/RSS and
NPA Aura/Pool contexts.
diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig
index 500c15e7ea4a..62a820b1eb16 100644
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
@@ -2,7 +2,7 @@
config NET_VENDOR_MEDIATEK
bool "MediaTek devices"
depends on ARCH_MEDIATEK || SOC_MT7621 || SOC_MT7620
- ---help---
+ help
If you have a Mediatek SoC with ethernet, say Y.
if NET_VENDOR_MEDIATEK
@@ -10,7 +10,7 @@ if NET_VENDOR_MEDIATEK
config NET_MEDIATEK_SOC
tristate "MediaTek SoC Gigabit Ethernet support"
select PHYLINK
- ---help---
+ help
This driver supports the gigabit ethernet MACs in the
MediaTek SoC family.
diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig
index 23cf7917a0c9..ff6613a5cdd3 100644
--- a/drivers/net/ethernet/mellanox/Kconfig
+++ b/drivers/net/ethernet/mellanox/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MELLANOX
bool "Mellanox devices"
default y
depends on PCI || I2C
- ---help---
+ help
If you have a network (Ethernet or RDMA) device belonging to this
class, say Y.
diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index e69c3c31e701..400e611ba041 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -8,7 +8,7 @@ config MLX4_EN
depends on PCI && NETDEVICES && ETHERNET && INET
select MLX4_CORE
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports Mellanox Technologies ConnectX Ethernet
devices.
@@ -16,7 +16,7 @@ config MLX4_EN_DCB
bool "Data Center Bridging (DCB) Support"
default y
depends on MLX4_EN && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If set to N, will not be able to configure QoS and ratelimit attributes.
@@ -34,7 +34,7 @@ config MLX4_DEBUG
bool "Verbose debugging output" if (MLX4_CORE && EXPERT)
depends on MLX4_CORE
default y
- ---help---
+ help
This option causes debugging code to be compiled into the
mlx4_core driver. The output can be turned on via the
debug_level module parameter (which can also be set after
@@ -44,6 +44,6 @@ config MLX4_CORE_GEN2
bool "Support for old gen2 Mellanox PCI IDs" if (MLX4_CORE)
depends on MLX4_CORE
default y
- ---help---
+ help
Say Y here if you want to use old gen2 Mellanox devices in the
driver.
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index b6ffd1622cfd..4dfdbb82ea9d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -12,7 +12,7 @@ config MLX5_CORE
depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
default n
- ---help---
+ help
Core driver for low level functionality of the ConnectX-4 and
Connect-IB cards by Mellanox Technologies.
@@ -23,7 +23,7 @@ config MLX5_FPGA
bool "Mellanox Technologies Innova support"
depends on MLX5_CORE
select MLX5_ACCEL
- ---help---
+ help
Build support for the Innova family of network cards by Mellanox
Technologies. Innova network cards are comprised of a ConnectX chip
and an FPGA chip on one board. If you select this option, the
@@ -36,14 +36,14 @@ config MLX5_CORE_EN
select PAGE_POOL
select DIMLIB
default n
- ---help---
+ help
Ethernet support in Mellanox Technologies ConnectX-4 NIC.
config MLX5_EN_ARFS
bool "Mellanox MLX5 ethernet accelerated receive flow steering (ARFS) support"
depends on MLX5_CORE_EN && RFS_ACCEL
default y
- ---help---
+ help
Mellanox MLX5 ethernet hardware-accelerated receive flow steering support,
Enables ethernet netdevice arfs support and ntuple filtering.
@@ -51,7 +51,7 @@ config MLX5_EN_RXNFC
bool "Mellanox MLX5 ethernet rx nfc flow steering support"
depends on MLX5_CORE_EN
default y
- ---help---
+ help
Mellanox MLX5 ethernet rx nfc flow steering support
Enables ethtool receive network flow classification, which allows user defined
flow rules to direct traffic into arbitrary rx queue via ethtool set/get_rxnfc
@@ -61,7 +61,7 @@ config MLX5_MPFS
bool "Mellanox Technologies MLX5 MPFS support"
depends on MLX5_CORE_EN
default y
- ---help---
+ help
Mellanox Technologies Ethernet Multi-Physical Function Switch (MPFS)
support in ConnectX NIC. MPFs is required for when multi-PF configuration
is enabled to allow passing user configured unicast MAC addresses to the
@@ -71,7 +71,7 @@ config MLX5_ESWITCH
bool "Mellanox Technologies MLX5 SRIOV E-Switch support"
depends on MLX5_CORE_EN && NET_SWITCHDEV
default y
- ---help---
+ help
Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC.
E-Switch provides internal SRIOV packet steering and switching for the
enabled VFs and PF in two available modes:
@@ -107,7 +107,7 @@ config MLX5_CORE_EN_DCB
bool "Data Center Bridging (DCB) Support"
default y
depends on MLX5_CORE_EN && DCB
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
If set to N, will not be able to configure QoS and ratelimit attributes.
@@ -119,7 +119,7 @@ config MLX5_CORE_IPOIB
bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support"
depends on MLX5_CORE_EN
default n
- ---help---
+ help
MLX5 IPoIB offloads & acceleration support.
config MLX5_FPGA_IPSEC
diff --git a/drivers/net/ethernet/mellanox/mlxfw/Kconfig b/drivers/net/ethernet/mellanox/mlxfw/Kconfig
index 5b604501f33e..c339f3c46e45 100644
--- a/drivers/net/ethernet/mellanox/mlxfw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxfw/Kconfig
@@ -5,7 +5,7 @@
config MLXFW
tristate "Mellanox Technologies firmware flash module"
- ---help---
+ help
This driver supports Mellanox Technologies Firmware
flashing common logic.
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index f458fd1ce9f8..872e9910bb7c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
@@ -6,7 +6,7 @@
config MLXSW_CORE
tristate "Mellanox Technologies Switch ASICs support"
select NET_DEVLINK
- ---help---
+ help
This driver supports Mellanox Technologies Switch ASICs family.
To compile this driver as a module, choose M here: the
@@ -17,14 +17,14 @@ config MLXSW_CORE_HWMON
depends on MLXSW_CORE && HWMON
depends on !(MLXSW_CORE=y && HWMON=m)
default y
- ---help---
+ help
Say Y here if you want to expose HWMON interface on mlxsw devices.
config MLXSW_CORE_THERMAL
bool "Thermal zone support for Mellanox Technologies Switch ASICs"
depends on MLXSW_CORE && THERMAL
default y
- ---help---
+ help
Say Y here if you want to automatically control fans speed according
ambient temperature reported by ASIC.
@@ -32,7 +32,7 @@ config MLXSW_PCI
tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
depends on PCI && HAS_IOMEM && MLXSW_CORE
default m
- ---help---
+ help
This is PCI bus implementation for Mellanox Technologies Switch ASICs.
To compile this driver as a module, choose M here: the
@@ -42,7 +42,7 @@ config MLXSW_I2C
tristate "I2C bus implementation for Mellanox Technologies Switch ASICs"
depends on I2C && MLXSW_CORE
default m
- ---help---
+ help
This is I2C bus implementation for Mellanox Technologies Switch ASICs.
To compile this driver as a module, choose M here: the
@@ -52,7 +52,7 @@ config MLXSW_SWITCHIB
tristate "Mellanox Technologies SwitchIB and SwitchIB-2 support"
depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV
default m
- ---help---
+ help
This driver supports Mellanox Technologies SwitchIB and SwitchIB-2
Infiniband Switch ASICs.
@@ -63,7 +63,7 @@ config MLXSW_SWITCHX2
tristate "Mellanox Technologies SwitchX-2 support"
depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV
default m
- ---help---
+ help
This driver supports Mellanox Technologies SwitchX-2 Ethernet
Switch ASICs.
@@ -86,7 +86,7 @@ config MLXSW_SPECTRUM
imply PTP_1588_CLOCK
select NET_PTP_CLASSIFY if PTP_1588_CLOCK
default m
- ---help---
+ help
This driver supports Mellanox Technologies
Spectrum/Spectrum-2/Spectrum-3 Ethernet Switch ASICs.
@@ -97,7 +97,7 @@ config MLXSW_SPECTRUM_DCB
bool "Data Center Bridging (DCB) support"
depends on MLXSW_SPECTRUM && DCB
default y
- ---help---
+ help
Say Y here if you want to use Data Center Bridging (DCB) in the
driver.
@@ -105,7 +105,7 @@ config MLXSW_MINIMAL
tristate "Mellanox Technologies minimal I2C support"
depends on MLXSW_CORE && MLXSW_I2C
default m
- ---help---
+ help
This driver supports I2C access for Mellanox Technologies Switch
ASICs.
diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
index 09f35209d43d..42bc014136fe 100644
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MICREL
bool "Micrel devices"
default y
depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_MICREL
config KS8842
tristate "Micrel KSZ8841/42 with generic bus interface"
depends on HAS_IOMEM && DMA_ENGINE
- ---help---
+ help
This platform driver is for KSZ8841(1-port) / KS8842(2-port)
ethernet switch chip (managed, VLAN, QoS) from Micrel or
Timberdale(FPGA).
@@ -31,7 +31,7 @@ config KS8851
select MII
select CRC32
select EEPROM_93CX6
- ---help---
+ help
SPI driver for Micrel KS8851 SPI attached network chip.
config KS8851_MLL
@@ -40,7 +40,7 @@ config KS8851_MLL
select MII
select CRC32
select EEPROM_93CX6
- ---help---
+ help
This platform driver is for Micrel KS8851 Address/data bus
multiplexed network chip.
@@ -49,7 +49,7 @@ config KSZ884X_PCI
depends on PCI
select MII
select CRC32
- ---help---
+ help
This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
index 45fe41f3d9f3..31f9a82dc113 100644
--- a/drivers/net/ethernet/microchip/Kconfig
+++ b/drivers/net/ethernet/microchip/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_MICROCHIP
bool "Microchip devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config ENC28J60
tristate "ENC28J60 support"
depends on SPI
select CRC32
- ---help---
+ help
Support for the Microchip EN28J60 ethernet chip.
To compile this driver as a module, choose M here. The module will be
@@ -29,14 +29,14 @@ config ENC28J60
config ENC28J60_WRITEVERIFY
bool "Enable write verify"
depends on ENC28J60
- ---help---
+ help
Enable the verify after the buffer write useful for debugging purpose.
If unsure, say N.
config ENCX24J600
tristate "ENCX24J600 support"
depends on SPI
- ---help---
+ help
Support for the Microchip ENC424J600/624J600 ethernet chip.
To compile this driver as a module, choose M here. The module will be
@@ -47,7 +47,7 @@ config LAN743X
depends on PCI
select PHYLIB
select CRC16
- ---help---
+ help
Support for the Microchip LAN743x PCI Express Gigabit Ethernet chip
To compile this driver as a module, choose M here. The module will be
diff --git a/drivers/net/ethernet/moxa/Kconfig b/drivers/net/ethernet/moxa/Kconfig
index 1a7cacbc0c59..134802b521cb 100644
--- a/drivers/net/ethernet/moxa/Kconfig
+++ b/drivers/net/ethernet/moxa/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MOXART
bool "MOXA ART devices"
default y
depends on (ARM && ARCH_MOXART)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config ARM_MOXART_ETHER
tristate "MOXART Ethernet support"
depends on ARM && ARCH_MOXART
select NET_CORE
- ---help---
+ help
If you wish to compile a kernel for a hardware with MOXA ART SoC and
want to use the internal ethernet then you should answer Y to this.
diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig
index 6bc993eae4c4..81267fd72dbf 100644
--- a/drivers/net/ethernet/myricom/Kconfig
+++ b/drivers/net/ethernet/myricom/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MYRI
bool "Myricom devices"
default y
depends on PCI && INET
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config MYRI10GE
depends on PCI && INET
select FW_LOADER
select CRC32
- ---help---
+ help
This driver supports Myricom Myri-10G Dual Protocol interface in
Ethernet mode. If the eeprom on your board is not recent enough,
you will need a newer firmware image.
@@ -37,7 +37,7 @@ config MYRI10GE_DCA
bool "Direct Cache Access (DCA) Support"
default y
depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
- ---help---
+ help
Say Y here if you want to use Direct Cache Access (DCA) in the
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
index c519c1f30225..0a92101aa3f1 100644
--- a/drivers/net/ethernet/natsemi/Kconfig
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_NATSEMI
bool "National Semiconductor devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ if NET_VENDOR_NATSEMI
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on MAC
- ---help---
+ help
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
a few Nubus and all known Comm Slot Ethernet cards. If you have
@@ -31,7 +31,7 @@ config MACSONIC
config MIPS_JAZZ_SONIC
tristate "MIPS JAZZ onboard SONIC Ethernet support"
depends on MACH_JAZZ
- ---help---
+ help
This is the driver for the onboard card of MIPS Magnum 4000,
Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
@@ -39,7 +39,7 @@ config NATSEMI
tristate "National Semiconductor DP8381x series PCI Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for the National Semiconductor DP83810 series,
which is used in cards from PureData, NetGear, Linksys
and others, including the 83815 chip.
@@ -49,7 +49,7 @@ config NATSEMI
config NS83820
tristate "National Semiconductor DP83820 support"
depends on PCI
- ---help---
+ help
This is a driver for the National Semiconductor DP83820 series
of gigabit ethernet MACs. Cards using this chipset include
the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
@@ -59,7 +59,7 @@ config NS83820
config XTENSA_XT2000_SONIC
tristate "Xtensa XT2000 onboard SONIC Ethernet support"
depends on XTENSA_PLATFORM_XT2000
- ---help---
+ help
This is the driver for the onboard card of the Xtensa XT2000 board.
endif # NET_VENDOR_NATSEMI
diff --git a/drivers/net/ethernet/neterion/Kconfig b/drivers/net/ethernet/neterion/Kconfig
index a82a37094579..5484f18f272e 100644
--- a/drivers/net/ethernet/neterion/Kconfig
+++ b/drivers/net/ethernet/neterion/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_NETERION
bool "Neterion (Exar) devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_NETERION
config S2IO
tristate "Neterion (Exar) Xframe 10Gb Ethernet Adapter"
depends on PCI
- ---help---
+ help
This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
These were originally released from S2IO, which renamed itself
Neterion. So, the adapters might be labeled as either one, depending
@@ -35,7 +35,7 @@ config S2IO
config VXGE
tristate "Neterion (Exar) X3100 Series 10GbE PCIe Server Adapter"
depends on PCI
- ---help---
+ help
This driver supports Exar Corp's X3100 Series 10 GbE PCIe
I/O Virtualized Server Adapter. These were originally released from
Neterion, which was later acquired by Exar. So, the adapters might be
@@ -51,7 +51,7 @@ config VXGE_DEBUG_TRACE_ALL
bool "Enabling All Debug trace statements in driver"
default n
depends on VXGE
- ---help---
+ help
Say Y here if you want to enabling all the debug trace statements in
the vxge driver. By default only few debug trace statements are
enabled.
diff --git a/drivers/net/ethernet/netronome/Kconfig b/drivers/net/ethernet/netronome/Kconfig
index a3f68a718813..d8b99d6a0356 100644
--- a/drivers/net/ethernet/netronome/Kconfig
+++ b/drivers/net/ethernet/netronome/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_NETRONOME
bool "Netronome(R) devices"
default y
- ---help---
+ help
If you have a Netronome(R) network (Ethernet) card or device, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config NFP
depends on VXLAN || VXLAN=n
depends on TLS && TLS_DEVICE || TLS_DEVICE=n
select NET_DEVLINK
- ---help---
+ help
This driver supports the Netronome(R) NFP4000/NFP6000 based
cards working as a advanced Ethernet NIC. It works with both
SR-IOV physical and virtual functions.
@@ -33,7 +33,7 @@ config NFP_APP_FLOWER
depends on NET_SWITCHDEV
depends on IPV6!=m || NFP=m
default y
- ---help---
+ help
Enable driver support for TC Flower offload on NFP4000 and NFP6000.
Say Y, if you are planning to make use of TC Flower offload
either directly, with Open vSwitch, or any other way. Note that
@@ -55,7 +55,7 @@ config NFP_APP_ABM_NIC
config NFP_DEBUG
bool "Debug support for Netronome(R) NFP4000/NFP6000 NIC drivers"
depends on NFP
- ---help---
+ help
Enable extra sanity checks and debugfs support in
Netronome(R) NFP4000/NFP6000 NIC drivers.
Note: selecting this option may adversely impact
diff --git a/drivers/net/ethernet/nvidia/Kconfig b/drivers/net/ethernet/nvidia/Kconfig
index faacbd129c44..c653786b1d05 100644
--- a/drivers/net/ethernet/nvidia/Kconfig
+++ b/drivers/net/ethernet/nvidia/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_NVIDIA
bool "NVIDIA devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_NVIDIA
config FORCEDETH
tristate "nForce Ethernet support"
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) controller of this type, say Y here.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/oki-semi/Kconfig b/drivers/net/ethernet/oki-semi/Kconfig
index 1c455c645bce..c2fff04ba7b6 100644
--- a/drivers/net/ethernet/oki-semi/Kconfig
+++ b/drivers/net/ethernet/oki-semi/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_OKI
bool "OKI Semiconductor devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
index 69e11d19bdc6..af84f72bf08e 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
@@ -9,7 +9,7 @@ config PCH_GBE
select MII
select PTP_1588_CLOCK_PCH
select NET_PTP_CLASSIFY
- ---help---
+ help
This is a gigabit ethernet driver for EG20T PCH.
EG20T PCH is the platform controller hub that is used in Intel's
general embedded platform. EG20T PCH has Gigabit Ethernet interface.
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
index ead3750b4489..de91331dcb7d 100644
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_PACKET_ENGINES
bool "Packet Engines devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
select MII
- ---help---
+ help
If you have a Gigabit Ethernet card of this type, say Y here.
To compile this driver as a module, choose M here. The module will be
@@ -31,7 +31,7 @@ config YELLOWFIN
tristate "Packet Engines Yellowfin Gigabit-NIC support"
depends on PCI
select CRC32
- ---help---
+ help
Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
used by the Beowulf Linux cluster project. See
diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig
index f4562243d4a0..cd68ebcf3e47 100644
--- a/drivers/net/ethernet/pasemi/Kconfig
+++ b/drivers/net/ethernet/pasemi/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_PASEMI
bool "PA Semi devices"
default y
depends on PPC_PASEMI && PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC_PASEMI && PCI
select PHYLIB
- ---help---
+ help
This driver supports the on-chip 1/10Gbit Ethernet controller on
PA Semi's PWRficient line of chips.
diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
index 55a29ec76680..8f743d80760b 100644
--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_QLOGIC
bool "QLogic devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_QLOGIC
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
- ---help---
+ help
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
@@ -30,7 +30,7 @@ config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
select FW_LOADER
- ---help---
+ help
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
@@ -38,7 +38,7 @@ config QLCNIC_SRIOV
bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
depends on QLCNIC && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support for QLE83XX Converged Ethernet devices.
This allows for virtual function acceleration in virtualized
@@ -48,7 +48,7 @@ config QLCNIC_DCB
bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
depends on QLCNIC && DCB
default y
- ---help---
+ help
This configuration parameter enables DCB support in QLE83XX
and QLE82XX Converged Ethernet devices. This allows for DCB
get operations support through rtNetlink interface. Only CEE
@@ -59,7 +59,7 @@ config QLCNIC_HWMON
bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
default y
- ---help---
+ help
This configuration parameter can be used to read the
board temperature in Converged Ethernet devices
supported by qlcnic.
@@ -70,7 +70,7 @@ config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
select FW_LOADER
- ---help---
+ help
This enables the support for NetXen's Gigabit Ethernet card.
config QED
@@ -79,7 +79,7 @@ config QED
select ZLIB_INFLATE
select CRC8
select NET_DEVLINK
- ---help---
+ help
This enables the support for ...
config QED_LL2
@@ -89,7 +89,7 @@ config QED_SRIOV
bool "QLogic QED 25/40/100Gb SR-IOV support"
depends on QED && PCI_IOV
default y
- ---help---
+ help
This configuration parameter enables Single Root Input Output
Virtualization support for QED devices.
This allows for virtual function acceleration in virtualized
@@ -99,7 +99,7 @@ config QEDE
tristate "QLogic QED 25/40/100Gb Ethernet NIC"
depends on QED
imply PTP_1588_CLOCK
- ---help---
+ help
This enables the support for ...
config QED_RDMA
diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig
index 09a678a94634..a4434eb38950 100644
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_QUALCOMM
bool "Qualcomm devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -25,7 +25,7 @@ config QCA7000_SPI
tristate "Qualcomm Atheros QCA7000 SPI support"
select QCA7000
depends on SPI_MASTER && OF
- ---help---
+ help
This SPI protocol driver supports the Qualcomm Atheros QCA7000.
To compile this driver as a module, choose M here. The module
@@ -35,7 +35,7 @@ config QCA7000_UART
tristate "Qualcomm Atheros QCA7000 UART support"
select QCA7000
depends on SERIAL_DEV_BUS && OF
- ---help---
+ help
This UART protocol driver supports the Qualcomm Atheros QCA7000.
Currently the driver assumes these device UART settings:
@@ -52,7 +52,7 @@ config QCOM_EMAC
depends on HAS_DMA && HAS_IOMEM
select CRC32
select PHYLIB
- ---help---
+ help
This driver supports the Qualcomm Technologies, Inc. Gigabit
Ethernet Media Access Controller (EMAC). The controller
supports IEEE 802.3-2002, half-duplex mode at 10/100 Mb/s,
diff --git a/drivers/net/ethernet/qualcomm/rmnet/Kconfig b/drivers/net/ethernet/qualcomm/rmnet/Kconfig
index 9f9279575e2e..b4a575eb0175 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/Kconfig
+++ b/drivers/net/ethernet/qualcomm/rmnet/Kconfig
@@ -7,7 +7,7 @@ menuconfig RMNET
tristate "RmNet MAP driver"
default n
select GRO_CELLS
- ---help---
+ help
If you select this, you will enable the RMNET module which is used
for handling data in the multiplexing and aggregation protocol (MAP)
format in the embedded data path. RMNET devices can be attached to
diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig
index 76df60c2f4ac..6884c7864bb9 100644
--- a/drivers/net/ethernet/rdc/Kconfig
+++ b/drivers/net/ethernet/rdc/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_RDC
bool "RDC devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config R6040
select CRC32
select MII
select PHYLIB
- ---help---
+ help
This is a driver for the R6040 Fast Ethernet MACs found in the
the RDC R-321x System-on-chips.
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 5e0b9d2f14f7..93d9df55b361 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_REALTEK
bool "Realtek devices"
default y
depends on PCI || (PARPORT && X86)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config ATP
tristate "AT-LAN-TEC/RealTek pocket adapter support"
depends on PARPORT && X86
select CRC32
- ---help---
+ help
This is a network (Ethernet) device which attaches to your parallel
port. Read the file <file:drivers/net/ethernet/realtek/atp.c>
if you want to use this. If you intend to use this driver, you
@@ -36,7 +36,7 @@ config 8139CP
depends on PCI
select CRC32
select MII
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the RTL8139C+ chips. If you have one of those, say Y here.
@@ -48,7 +48,7 @@ config 8139TOO
depends on PCI
select CRC32
select MII
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the RTL 8129/8130/8139 chips. If you have one of those, say Y here.
@@ -59,7 +59,7 @@ config 8139TOO_PIO
bool "Use PIO instead of MMIO"
default y
depends on 8139TOO
- ---help---
+ help
This instructs the driver to use programmed I/O ports (PIO) instead
of PCI shared memory (MMIO). This can possibly solve some problems
in case your mainboard has memory consistency issues. If unsure,
@@ -68,7 +68,7 @@ config 8139TOO_PIO
config 8139TOO_TUNE_TWISTER
bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
depends on 8139TOO
- ---help---
+ help
This implements a function which might come in handy in case you
are using low quality on long cabling. It is required for RealTek
RTL-8139 revision K boards, and totally unused otherwise. It tries
@@ -79,7 +79,7 @@ config 8139TOO_TUNE_TWISTER
config 8139TOO_8129
bool "Support for older RTL-8129/8130 boards"
depends on 8139TOO
- ---help---
+ help
This enables support for the older and uncommon RTL-8129 and
RTL-8130 chips, which support MII via an external transceiver,
instead of an internal one. Disabling this option will save some
@@ -88,7 +88,7 @@ config 8139TOO_8129
config 8139_OLD_RX_RESET
bool "Use older RX-reset method"
depends on 8139TOO
- ---help---
+ help
The 8139too driver was recently updated to contain a more rapid
reset sequence, in the face of severe receive errors. This "new"
RX-reset method should be adequate for all boards. But if you
@@ -102,7 +102,7 @@ config R8169
select CRC32
select PHYLIB
select REALTEK_PHY
- ---help---
+ help
Say Y here if you have a Realtek Ethernet adapter belonging to
the following families:
RTL8169 Gigabit Ethernet
diff --git a/drivers/net/ethernet/renesas/Kconfig b/drivers/net/ethernet/renesas/Kconfig
index bb0ebdfd4459..5a2a4af31812 100644
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_RENESAS
bool "Renesas devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config SH_ETH
select MII
select MDIO_BITBANG
select PHYLIB
- ---help---
+ help
Renesas SuperH Ethernet device driver.
This driver supporting CPUs are:
- SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757,
diff --git a/drivers/net/ethernet/rocker/Kconfig b/drivers/net/ethernet/rocker/Kconfig
index 1083de99830d..99e1290e0307 100644
--- a/drivers/net/ethernet/rocker/Kconfig
+++ b/drivers/net/ethernet/rocker/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_ROCKER
bool "Rocker devices"
default y
- ---help---
+ help
If you have a network device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ if NET_VENDOR_ROCKER
config ROCKER
tristate "Rocker switch driver (EXPERIMENTAL)"
depends on PCI && NET_SWITCHDEV && BRIDGE
- ---help---
+ help
This driver supports Rocker switch device.
To compile this driver as a module, choose M here: the
diff --git a/drivers/net/ethernet/samsung/Kconfig b/drivers/net/ethernet/samsung/Kconfig
index e92a178a76df..0582e110b1c0 100644
--- a/drivers/net/ethernet/samsung/Kconfig
+++ b/drivers/net/ethernet/samsung/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SAMSUNG
bool "Samsung Ethernet devices"
default y
- ---help---
+ help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -23,7 +23,7 @@ config SXGBE_ETH
select PHYLIB
select CRC32
imply PTP_1588_CLOCK
- ---help---
+ help
This is the driver for the SXGBE 10G Ethernet IP block found on
Samsung platforms.
diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig
index f3ac9cba5770..ad1df37571dd 100644
--- a/drivers/net/ethernet/seeq/Kconfig
+++ b/drivers/net/ethernet/seeq/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SEEQ
bool "SEEQ devices"
default y
depends on HAS_IOMEM
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,14 +20,14 @@ if NET_VENDOR_SEEQ
config ARM_ETHER3
tristate "Acorn/ANT Ether3 support"
depends on ARM && ARCH_ACORN
- ---help---
+ help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
- ---help---
+ help
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
diff --git a/drivers/net/ethernet/sfc/Kconfig b/drivers/net/ethernet/sfc/Kconfig
index ea5a9220196c..81b0f7d3a025 100644
--- a/drivers/net/ethernet/sfc/Kconfig
+++ b/drivers/net/ethernet/sfc/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SOLARFLARE
bool "Solarflare devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config SFC
select MDIO
select CRC32
imply PTP_1588_CLOCK
- ---help---
+ help
This driver supports 10/40-gigabit Ethernet cards based on
the Solarflare SFC9000-family and SFC9100-family controllers.
@@ -32,7 +32,7 @@ config SFC_MTD
bool "Solarflare SFC9000/SFC9100-family MTD support"
depends on SFC && MTD && !(SFC=y && MTD=m)
default y
- ---help---
+ help
This exposes the on-board flash and/or EEPROM as MTD devices
(e.g. /dev/mtd1). This is required to update the firmware or
the boot configuration under Linux.
@@ -40,14 +40,14 @@ config SFC_MCDI_MON
bool "Solarflare SFC9000/SFC9100-family hwmon support"
depends on SFC && HWMON && !(SFC=y && HWMON=m)
default y
- ---help---
+ help
This exposes the on-board firmware-managed sensors as a
hardware monitor device.
config SFC_SRIOV
bool "Solarflare SFC9000-family SR-IOV support"
depends on SFC && PCI_IOV
default y
- ---help---
+ help
This enables support for the SFC9000 I/O Virtualization
features, allowing accelerated network performance in
virtualized environments.
@@ -55,7 +55,7 @@ config SFC_MCDI_LOGGING
bool "Solarflare SFC9000/SFC9100-family MCDI logging support"
depends on SFC
default y
- ---help---
+ help
This enables support for tracing of MCDI (Management-Controller-to-
Driver-Interface) commands and responses, allowing debugging of
driver/firmware interaction. The tracing is actually enabled by
diff --git a/drivers/net/ethernet/sfc/falcon/Kconfig b/drivers/net/ethernet/sfc/falcon/Kconfig
index 20e361950f7d..071154045dc2 100644
--- a/drivers/net/ethernet/sfc/falcon/Kconfig
+++ b/drivers/net/ethernet/sfc/falcon/Kconfig
@@ -6,7 +6,7 @@ config SFC_FALCON
select CRC32
select I2C
select I2C_ALGOBIT
- ---help---
+ help
This driver supports 10-gigabit Ethernet cards based on
the Solarflare SFC4000 controller.
@@ -16,7 +16,7 @@ config SFC_FALCON_MTD
bool "Solarflare SFC4000 MTD support"
depends on SFC_FALCON && MTD && !(SFC_FALCON=y && MTD=m)
default y
- ---help---
+ help
This exposes the on-board flash and/or EEPROM as MTD devices
(e.g. /dev/mtd1). This is required to update the boot
configuration under Linux.
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig
index bc26fa0d196f..af66bb0a20d1 100644
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SGI
bool "SGI devices"
default y
depends on (PCI && SGI_MFD_IOC3) || SGI_IP32
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config SGI_IOC3_ETH
select CRC16
select CRC32
select MII
- ---help---
+ help
If you have a network (Ethernet) card of this type, say Y here.
config SGI_O2MACE_ETH
diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig
index 71929d148c3c..7ed08d588ac2 100644
--- a/drivers/net/ethernet/silan/Kconfig
+++ b/drivers/net/ethernet/silan/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SILAN
bool "Silan devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config SC92031
tristate "Silan SC92031 PCI Fast Ethernet Adapter driver"
depends on PCI
select CRC32
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
have one of these, say Y here.
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index d848ab0349a7..775d76d9890e 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SIS
bool "Silicon Integrated Systems (SiS) devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config SIS900
depends on PCI
select CRC32
select MII
- ---help---
+ help
This is a driver for the Fast Ethernet PCI network cards based on
the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
SiS 630 and SiS 540 chipsets.
@@ -38,7 +38,7 @@ config SIS190
depends on PCI
select CRC32
select MII
- ---help---
+ help
Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
appear in lan on motherboard designs which are based on SiS 965
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 4d2d91ec8b41..6293b1e6c772 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -9,7 +9,7 @@ config NET_VENDOR_SMSC
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
ISA || MAC || MIPS || NIOS2 || PCI || \
PCMCIA || SUPERH || XTENSA || H8300
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config SMC9194
tristate "SMC 9194 support"
depends on ISA
select CRC32
- ---help---
+ help
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
@@ -40,7 +40,7 @@ config SMC91X
depends on !OF || GPIOLIB
depends on ARM || ARM64 || ATARI_ETHERNAT || COLDFIRE || \
MIPS || NIOS2 || SUPERH || XTENSA || H8300
- ---help---
+ help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
compiled into the kernel, and read the file
@@ -56,7 +56,7 @@ config PCMCIA_SMC91C92
depends on PCMCIA
select CRC32
select MII
- ---help---
+ help
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
@@ -68,7 +68,7 @@ config EPIC100
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
which is based on the SMC83c17x (EPIC/100).
More specific information and updates are available from
@@ -79,7 +79,7 @@ config SMC911X
select CRC32
select MII
depends on (ARM || SUPERH)
- ---help---
+ help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
Say Y here if you want it compiled into the kernel.
@@ -94,7 +94,7 @@ config SMSC911X
select CRC32
select MII
select PHYLIB
- ---help---
+ help
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
@@ -104,7 +104,7 @@ config SMSC911X
config SMSC911X_ARCH_HOOKS
def_bool n
depends on SMSC911X
- ---help---
+ help
If the arch enables this, it allows the arch to implement various
hooks for more comprehensive interrupt control and also to override
the source of the MAC address.
@@ -115,7 +115,7 @@ config SMSC9420
select CRC32
select PHYLIB
select SMSC_PHY
- ---help---
+ help
This is a driver for SMSC's LAN9420 PCI ethernet adapter.
Say Y here if you want it compiled into the kernel.
diff --git a/drivers/net/ethernet/socionext/Kconfig b/drivers/net/ethernet/socionext/Kconfig
index 95e99baf3f45..48298389851d 100644
--- a/drivers/net/ethernet/socionext/Kconfig
+++ b/drivers/net/ethernet/socionext/Kconfig
@@ -2,7 +2,7 @@
config NET_VENDOR_SOCIONEXT
bool "Socionext ethernet drivers"
default y
- ---help---
+ help
Option to select ethernet drivers for Socionext platforms.
Note that the answer to this question doesn't directly affect the
@@ -18,7 +18,7 @@ config SNI_AVE
depends on HAS_IOMEM
select MFD_SYSCON
select PHYLIB
- ---help---
+ help
Driver for gigabit ethernet MACs, called AVE, in the
Socionext UniPhier family.
@@ -28,7 +28,7 @@ config SNI_NETSEC
select PHYLIB
select PAGE_POOL
select MII
- ---help---
+ help
Enable to add support for the SocioNext NetSec Gigabit Ethernet
controller + PHY, as found on the Synquacer SC2A11 SoC
diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig
index 39ef86360417..cc136b4c9afd 100644
--- a/drivers/net/ethernet/stmicro/Kconfig
+++ b/drivers/net/ethernet/stmicro/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_STMICRO
bool "STMicroelectronics devices"
default y
depends on HAS_IOMEM
- ---help---
+ help
If you have a network (Ethernet) card based on Synopsys Ethernet IP
Cores, say Y.
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 36bd2e18f23b..9a47c5aec91a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -9,7 +9,7 @@ config STMMAC_ETH
select CRC32
imply PTP_1588_CLOCK
select RESET_CONTROLLER
- ---help---
+ help
This is the driver for the Ethernet IPs built around a
Synopsys IP Core.
@@ -20,7 +20,7 @@ config STMMAC_SELFTESTS
depends on INET
depends on STMMAC_ETH
default n
- ---help---
+ help
This adds support for STMMAC Selftests using ethtool. Enable this
feature if you are facing problems with your HW and submit the test
results to the netdev Mailing List.
@@ -30,7 +30,7 @@ config STMMAC_PLATFORM
depends on STMMAC_ETH
select MFD_SYSCON
default y
- ---help---
+ help
This selects the platform specific bus support for the stmmac driver.
This is the driver used on several SoCs:
STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
@@ -52,7 +52,7 @@ config DWMAC_DWC_QOS_ETH
config DWMAC_GENERIC
tristate "Generic driver for DWMAC"
default STMMAC_PLATFORM
- ---help---
+ help
Generic DWMAC driver for platforms that don't require any
platform specific code to function or is using platform
data for setup.
@@ -84,7 +84,7 @@ config DWMAC_LPC18XX
default ARCH_LPC18XX
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for NXP LPC18xx/43xx DWMAC Ethernet.
config DWMAC_MEDIATEK
@@ -155,7 +155,7 @@ config DWMAC_STI
default ARCH_STI
depends on OF && (ARCH_STI || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for ethernet controller on STi SOCs.
This selects STi SoC glue layer support for the stmmac
@@ -167,7 +167,7 @@ config DWMAC_STM32
default ARCH_STM32
depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for ethernet controller on STM32 SOCs.
This selects STM32 SoC glue layer support for the stmmac
@@ -178,7 +178,7 @@ config DWMAC_SUNXI
tristate "Allwinner GMAC support"
default ARCH_SUNXI
depends on OF && (ARCH_SUNXI || COMPILE_TEST)
- ---help---
+ help
Support for Allwinner A20/A31 GMAC ethernet controllers.
This selects Allwinner SoC glue layer support for the
@@ -190,7 +190,7 @@ config DWMAC_SUN8I
default ARCH_SUNXI
depends on OF && (ARCH_SUNXI || COMPILE_TEST)
select MDIO_BUS_MUX
- ---help---
+ help
Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
This selects Allwinner SoC glue layer support for the
@@ -202,7 +202,7 @@ config DWMAC_IMX8
default ARCH_MXC
depends on OF && (ARCH_MXC || COMPILE_TEST)
select MFD_SYSCON
- ---help---
+ help
Support for ethernet controller on NXP i.MX8 SOCs.
This selects NXP SoC glue layer support for the stmmac
@@ -216,7 +216,7 @@ config DWMAC_INTEL
default X86
depends on X86 && STMMAC_ETH && PCI
depends on COMMON_CLK
- ---help---
+ help
This selects the Intel platform specific bus support for the
stmmac driver. This driver is used for Intel Quark/EHL/TGL.
@@ -224,7 +224,7 @@ config STMMAC_PCI
tristate "STMMAC PCI bus support"
depends on STMMAC_ETH && PCI
depends on COMMON_CLK
- ---help---
+ help
This selects the platform specific bus support for the stmmac driver.
This driver was tested on XLINX XC2V3000 FF1152AMT0221
D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig
index 7b982e02ea3a..309de38a7530 100644
--- a/drivers/net/ethernet/sun/Kconfig
+++ b/drivers/net/ethernet/sun/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_SUN
bool "Sun devices"
default y
depends on SUN3 || SBUS || PCI || SUN_LDOMS
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on (SBUS || PCI)
select CRC32
- ---help---
+ help
This driver supports the "hme" interface present on most Ultra
systems and as an option on older Sbus systems. This driver supports
both PCI and Sbus devices. This driver also supports the "qfe" quad
@@ -34,7 +34,7 @@ config SUNBMAC
tristate "Sun BigMAC 10/100baseT support"
depends on SBUS
select CRC32
- ---help---
+ help
This driver supports the "be" interface available as an Sbus option.
This is Sun's older 100baseT Ethernet device.
@@ -45,7 +45,7 @@ config SUNQE
tristate "Sun QuadEthernet support"
depends on SBUS
select CRC32
- ---help---
+ help
This driver supports the "qe" 10baseT Ethernet device, available as
an Sbus option. Note that this is not the same as Quad FastEthernet
"qfe" which is supported by the Happy Meal driver instead.
@@ -58,7 +58,7 @@ config SUNGEM
depends on PCI
select CRC32
select SUNGEM_PHY
- ---help---
+ help
Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
<http://docs.oracle.com/cd/E19455-01/806-3985-10/806-3985-10.pdf>.
@@ -66,7 +66,7 @@ config CASSINI
tristate "Sun Cassini support"
depends on PCI
select CRC32
- ---help---
+ help
Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
<http://docs.oracle.com/cd/E19113-01/giga.ether.pci/817-4341-10/817-4341-10.pdf>.
@@ -80,7 +80,7 @@ config SUNVNET
default m
depends on SUN_LDOMS
depends on SUNVNET_COMMON
- ---help---
+ help
Support for virtual network devices under Sun Logical Domains.
config LDMVSW
@@ -88,7 +88,7 @@ config LDMVSW
default m
depends on SUN_LDOMS
depends on SUNVNET_COMMON
- ---help---
+ help
Support for virtual switch devices under Sun4v Logical Domains.
This driver adds a network interface for every vsw-port node
found in the machine description of a service domain.
@@ -100,7 +100,7 @@ config NIU
tristate "Sun Neptune 10Gbit Ethernet support"
depends on PCI
select CRC32
- ---help---
+ help
This enables support for cards based upon Sun's
Neptune chipset.
diff --git a/drivers/net/ethernet/synopsys/Kconfig b/drivers/net/ethernet/synopsys/Kconfig
index 9e199772c1d7..f2a4287c48b8 100644
--- a/drivers/net/ethernet/synopsys/Kconfig
+++ b/drivers/net/ethernet/synopsys/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SYNOPSYS
bool "Synopsys devices"
default y
- ---help---
+ help
If you have a network (Ethernet) device belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config DWC_XLGMAC
depends on HAS_IOMEM && HAS_DMA
select BITREVERSE
select CRC32
- ---help---
+ help
This driver supports the Synopsys DesignWare Cores Enterprise
Ethernet (dwc-xlgmac).
@@ -30,7 +30,7 @@ if DWC_XLGMAC
config DWC_XLGMAC_PCI
tristate "XLGMAC PCI bus support"
depends on DWC_XLGMAC && PCI
- ---help---
+ help
This selects the pci bus support for the dwc-xlgmac driver.
This driver was tested on Synopsys XLGMAC IP Prototyping Kit.
diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig
index 8ad1526f4bdd..8735633765a1 100644
--- a/drivers/net/ethernet/tehuti/Kconfig
+++ b/drivers/net/ethernet/tehuti/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TEHUTI
bool "Tehuti devices"
default y
depends on PCI
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_TEHUTI
config TEHUTI
tristate "Tehuti Networks 10G Ethernet"
depends on PCI
- ---help---
+ help
Tehuti Networks 10G Ethernet NIC
endif # NET_VENDOR_TEHUTI
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 182d10f171f6..50f55364d4fb 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
default y
depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config TI_DAVINCI_EMAC
select TI_DAVINCI_MDIO
select PHYLIB
select GENERIC_ALLOCATOR
- ---help---
+ help
This driver supports TI's DaVinci Ethernet .
To compile this driver as a module, choose M here: the module
@@ -33,7 +33,7 @@ config TI_DAVINCI_MDIO
tristate "TI DaVinci MDIO Support"
depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
select PHYLIB
- ---help---
+ help
This driver supports TI's DaVinci MDIO module.
To compile this driver as a module, choose M here: the module
@@ -42,7 +42,7 @@ config TI_DAVINCI_MDIO
config TI_CPSW_PHY_SEL
bool "TI CPSW Phy mode Selection (DEPRECATED)"
default n
- ---help---
+ help
This driver supports configuring of the phy mode connected to
the CPSW. DEPRECATED: use PHY_TI_GMII_SEL.
@@ -55,7 +55,7 @@ config TI_CPSW
select PAGE_POOL
select REGMAP
imply PHY_TI_GMII_SEL
- ---help---
+ help
This driver supports TI's CPSW Ethernet Switch.
To compile this driver as a module, choose M here: the module
@@ -83,7 +83,7 @@ config TI_CPTS
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
depends on COMMON_CLK
depends on PTP_1588_CLOCK
- ---help---
+ help
This driver supports the Common Platform Time Sync unit of
the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
@@ -133,7 +133,7 @@ config TI_KEYSTONE_NETCP
depends on OF
depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
depends on TI_CPTS || !TI_CPTS
- ---help---
+ help
This driver supports TI's Keystone NETCP Core.
To compile this driver as a module, choose M here: the module
@@ -142,7 +142,7 @@ config TI_KEYSTONE_NETCP
config TI_KEYSTONE_NETCP_ETHSS
depends on TI_KEYSTONE_NETCP
tristate "TI Keystone NETCP Ethernet subsystem Support"
- ---help---
+ help
To compile this driver as a module, choose M here: the module
will be called keystone_netcp_ethss.
@@ -150,7 +150,7 @@ config TI_KEYSTONE_NETCP_ETHSS
config TLAN
tristate "TI ThunderLAN support"
depends on (PCI || EISA)
- ---help---
+ help
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y here.
@@ -168,7 +168,7 @@ config CPMAC
tristate "TI AR7 CPMAC Ethernet support"
depends on AR7
select PHYLIB
- ---help---
+ help
TI AR7 CPMAC Ethernet support
endif # NET_VENDOR_TI
diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig
index 9ccdf032404e..701e9b7c1c3b 100644
--- a/drivers/net/ethernet/toshiba/Kconfig
+++ b/drivers/net/ethernet/toshiba/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TOSHIBA
bool "Toshiba devices"
default y
depends on PCI && (PPC_IBM_CELL_BLADE || MIPS) || PPC_PS3
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -21,7 +21,7 @@ config GELIC_NET
tristate "PS3 Gigabit Ethernet driver"
depends on PPC_PS3
select PS3_SYS_MANAGER
- ---help---
+ help
This driver supports the network device on the PS3 game
console. This driver has built-in support for Ethernet.
@@ -32,7 +32,7 @@ config GELIC_WIRELESS
bool "PS3 Wireless support"
depends on GELIC_NET && WLAN
select WIRELESS_EXT
- ---help---
+ help
This option adds the support for the wireless feature of PS3.
If you have the wireless-less model of PS3 or have no plan to
use wireless feature, disabling this option saves memory. As
@@ -44,7 +44,7 @@ config SPIDER_NET
depends on PCI && PPC_IBM_CELL_BLADE
select FW_LOADER
select SUNGEM_PHY
- ---help---
+ help
This driver supports the Gigabit Ethernet chips present on the
Cell Processor-Based Blades from IBM.
diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig
index 5c909df0c3b9..edd52b2bd135 100644
--- a/drivers/net/ethernet/tundra/Kconfig
+++ b/drivers/net/ethernet/tundra/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_TUNDRA
bool "Tundra devices"
default y
depends on TSI108_BRIDGE
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_TUNDRA
config TSI108_ETH
tristate "Tundra TSI108 gigabit Ethernet support"
depends on TSI108_BRIDGE
- ---help---
+ help
This driver supports Tundra TSI108 gigabit Ethernet ports.
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index 6cff5f7d57c4..da287ef65be7 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_VIA
bool "VIA devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config VIA_RHINE
depends on HAS_DMA
select CRC32
select MII
- ---help---
+ help
If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
Ethernet functions can also be found integrated on South Bridges
@@ -35,7 +35,7 @@ config VIA_RHINE
config VIA_RHINE_MMIO
bool "Use MMIO instead of PIO"
depends on VIA_RHINE
- ---help---
+ help
This instructs the driver to use PCI shared memory (MMIO) instead of
programmed I/O ports (PIO). Enabling this gives an improvement in
processing time in parts of the driver.
@@ -49,7 +49,7 @@ config VIA_VELOCITY
select CRC32
select CRC_CCITT
select MII
- ---help---
+ help
If you have a VIA "Velocity" based network card say Y here.
To compile this driver as a module, choose M here. The module
diff --git a/drivers/net/ethernet/wiznet/Kconfig b/drivers/net/ethernet/wiznet/Kconfig
index 0422775e1659..4bac2ad2d6a1 100644
--- a/drivers/net/ethernet/wiznet/Kconfig
+++ b/drivers/net/ethernet/wiznet/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_WIZNET
bool "WIZnet devices"
depends on HAS_IOMEM
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_WIZNET
config WIZNET_W5100
tristate "WIZnet W5100 Ethernet support"
depends on HAS_IOMEM
- ---help---
+ help
Support for WIZnet W5100 chips.
W5100 is a single chip with integrated 10/100 Ethernet MAC,
@@ -33,7 +33,7 @@ config WIZNET_W5100
config WIZNET_W5300
tristate "WIZnet W5300 Ethernet support"
depends on HAS_IOMEM
- ---help---
+ help
Support for WIZnet W5300 chips.
W5300 is a single chip with integrated 10/100 Ethernet MAC,
@@ -50,20 +50,20 @@ choice
config WIZNET_BUS_DIRECT
bool "Direct address bus mode"
- ---help---
+ help
In direct address mode host system can directly access all registers
after mapping to Memory-Mapped I/O space.
config WIZNET_BUS_INDIRECT
bool "Indirect address bus mode"
- ---help---
+ help
In indirect address mode host system indirectly accesses registers
using Indirect Mode Address Register and Indirect Mode Data Register,
which are directly mapped to Memory-Mapped I/O space.
config WIZNET_BUS_ANY
bool "Select interface mode in runtime"
- ---help---
+ help
If interface mode is unknown in compile time, it can be selected
in runtime from board/platform resources configuration.
@@ -74,7 +74,7 @@ config WIZNET_W5100_SPI
tristate "WIZnet W5100/W5200/W5500 Ethernet support for SPI mode"
depends on WIZNET_BUS_ANY && WIZNET_W5100
depends on SPI
- ---help---
+ help
In SPI mode host system accesses registers using SPI protocol
(mode 0) on the SPI bus.
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 0810af8193cb..d0d0d4fe9d40 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_XILINX
bool "Xilinx devices"
default y
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,20 +20,20 @@ config XILINX_EMACLITE
tristate "Xilinx 10/100 Ethernet Lite support"
depends on PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS
select PHYLIB
- ---help---
+ help
This driver supports the 10/100 Ethernet Lite from Xilinx.
config XILINX_AXI_EMAC
tristate "Xilinx 10/100/1000 AXI Ethernet support"
select PHYLINK
- ---help---
+ help
This driver supports the 10/100/1000 Ethernet from Xilinx for the
AXI bus interface used in Xilinx Virtex FPGAs and Soc's.
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
select PHYLIB
- ---help---
+ help
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
index ad5390079b13..7497b9bea511 100644
--- a/drivers/net/ethernet/xircom/Kconfig
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_XIRCOM
bool "Xircom devices"
default y
depends on PCMCIA
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ if NET_VENDOR_XIRCOM
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
depends on PCMCIA
- ---help---
+ help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 98aa7b8ddb06..7b83a6e5d894 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_XSCALE
default y
depends on NET_VENDOR_INTEL && (ARM && ARCH_IXP4XX && \
IXP4XX_NPE && IXP4XX_QMGR)
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question does not directly affect the
@@ -23,7 +23,7 @@ config IXP4XX_ETH
depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
select PHYLIB
select NET_PTP_CLASSIFY
- ---help---
+ help
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
index da4f58eed08f..60cc7524520c 100644
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
@@ -6,7 +6,7 @@
config FDDI
tristate "FDDI driver support"
depends on PCI || EISA || TC
- ---help---
+ help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
run over copper or fiber. If you are connected to such a network and
@@ -30,7 +30,7 @@ config DEFZA
config DEFXX
tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
depends on FDDI && (PCI || EISA || TC)
- ---help---
+ help
This is support for the DIGITAL series of TURBOchannel (DEFTA),
EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
to a local FDDI network.
@@ -44,7 +44,7 @@ config DEFXX_MMIO
depends on DEFXX
default n if PCI || EISA
default y
- ---help---
+ help
This instructs the driver to use EISA or PCI memory-mapped I/O
(MMIO) as appropriate instead of programmed I/O ports (PIO).
Enabling this gives an improvement in processing time in parts
@@ -58,7 +58,7 @@ config SKFP
tristate "SysKonnect FDDI PCI support"
depends on FDDI && PCI
select BITREVERSE
- ---help---
+ help
Say Y here if you have a SysKonnect FDDI PCI adapter.
The following adapters are supported by this driver:
- SK-5521 (SK-NET FDDI-UP)
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index f4500f04147d..70f754abbeca 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -3,7 +3,7 @@ config MKISS
tristate "Serial port KISS driver"
depends on AX25 && TTY
select CRC16
- ---help---
+ help
KISS is a protocol used for the exchange of data between a computer
and a Terminal Node Controller (a small embedded system commonly
used for networking over AX.25 amateur radio connections; it
@@ -20,7 +20,7 @@ config MKISS
config 6PACK
tristate "Serial port 6PACK driver"
depends on AX25 && TTY
- ---help---
+ help
6pack is a transmission protocol for the data exchange between your
PC and your TNC (the Terminal Node Controller acts as a kind of
modem connecting your computer's serial port to your radio's
@@ -48,7 +48,7 @@ config BPQETHER
config DMASCC
tristate "High-speed (DMA) SCC driver for AX.25"
depends on ISA && AX25 && BROKEN_ON_SMP && ISA_DMA_API
- ---help---
+ help
This is a driver for high-speed SCC boards, i.e. those supporting
DMA on one port. You usually use those boards to connect your
computer to an amateur radio modem (such as the WA4DSY 56kbps
@@ -81,7 +81,7 @@ config DMASCC
config SCC
tristate "Z8530 SCC driver"
depends on ISA && AX25 && ISA_DMA_API
- ---help---
+ help
These cards are used to connect your Linux box to an amateur radio
in order to communicate with other computers. If you want to use
this, read <file:Documentation/networking/z8530drv.rst> and the
@@ -116,7 +116,7 @@ config BAYCOM_SER_FDX
tristate "BAYCOM ser12 fullduplex driver for AX.25"
depends on AX25 && !S390
select CRC_CCITT
- ---help---
+ help
This is one of two drivers for Baycom style simple amateur radio
modems that connect to a serial interface. The driver supports the
ser12 design in full-duplex mode. In addition, it allows the
@@ -136,7 +136,7 @@ config BAYCOM_SER_HDX
tristate "BAYCOM ser12 halfduplex driver for AX.25"
depends on AX25 && !S390
select CRC_CCITT
- ---help---
+ help
This is one of two drivers for Baycom style simple amateur radio
modems that connect to a serial interface. The driver supports the
ser12 design in half-duplex mode. This is the old driver. It is
@@ -154,7 +154,7 @@ config BAYCOM_PAR
tristate "BAYCOM picpar and par96 driver for AX.25"
depends on PARPORT && AX25
select CRC_CCITT
- ---help---
+ help
This is a driver for Baycom style simple amateur radio modems that
connect to a parallel interface. The driver supports the picpar and
par96 designs. To configure the driver, use the sethdlc utility
@@ -169,7 +169,7 @@ config BAYCOM_EPP
tristate "BAYCOM epp driver for AX.25"
depends on PARPORT && AX25 && !64BIT
select CRC_CCITT
- ---help---
+ help
This is a driver for Baycom style simple amateur radio modems that
connect to a parallel interface. The driver supports the EPP
designs. To configure the driver, use the sethdlc utility available
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
index de78504a5798..46b911bb8493 100644
--- a/drivers/net/hippi/Kconfig
+++ b/drivers/net/hippi/Kconfig
@@ -6,7 +6,7 @@
config HIPPI
bool "HIPPI driver support"
depends on INET && PCI
- ---help---
+ help
HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
can run over copper (25m) or fiber (300m on multi-mode or 10km on
@@ -21,7 +21,7 @@ if HIPPI
config ROADRUNNER
tristate "Essential RoadRunner HIPPI PCI adapter support"
depends on PCI
- ---help---
+ help
Say Y here if this is your PCI HIPPI network card.
To compile this driver as a module, choose M here: the module
@@ -30,7 +30,7 @@ config ROADRUNNER
config ROADRUNNER_LARGE_RINGS
bool "Use large TX/RX rings"
depends on ROADRUNNER
- ---help---
+ help
If you say Y here, the RoadRunner driver will preallocate up to 2 MB
of additional memory to allow for fastest operation, both for
transmitting and receiving. This memory cannot be used by any other
diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index c92a62dbf398..0f7c6dc2ed15 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -3,7 +3,7 @@ menuconfig IEEE802154_DRIVERS
tristate "IEEE 802.15.4 drivers"
depends on NETDEVICES && IEEE802154
default y
- ---help---
+ help
Say Y here to get to see options for IEEE 802.15.4 Low-Rate
Wireless Personal Area Network device drivers. This option alone
does not add any kernel code.
@@ -14,7 +14,7 @@ menuconfig IEEE802154_DRIVERS
config IEEE802154_FAKELB
depends on IEEE802154_DRIVERS && MAC802154
tristate "IEEE 802.15.4 loopback driver"
- ---help---
+ help
Say Y here to enable the fake driver that can emulate a net
of several interconnected radio devices.
@@ -26,7 +26,7 @@ config IEEE802154_AT86RF230
tristate "AT86RF230/231/233/212 transceiver driver"
depends on SPI
select REGMAP_SPI
- ---help---
+ help
Say Y here to enable the at86rf230/231/233/212 SPI 802.15.4 wireless
controller.
@@ -37,7 +37,7 @@ config IEEE802154_AT86RF230_DEBUGFS
depends on IEEE802154_AT86RF230
bool "AT86RF230 debugfs interface"
depends on DEBUG_FS
- ---help---
+ help
This option compiles debugfs code for the at86rf230 driver.
config IEEE802154_MRF24J40
@@ -45,7 +45,7 @@ config IEEE802154_MRF24J40
depends on IEEE802154_DRIVERS && MAC802154
depends on SPI
select REGMAP_SPI
- ---help---
+ help
Say Y here to enable the MRF24J20 SPI 802.15.4 wireless
controller.
@@ -56,7 +56,7 @@ config IEEE802154_CC2520
depends on IEEE802154_DRIVERS && MAC802154
tristate "CC2520 transceiver driver"
depends on SPI
- ---help---
+ help
Say Y here to enable the CC2520 SPI 802.15.4 wireless
controller.
@@ -66,7 +66,7 @@ config IEEE802154_CC2520
config IEEE802154_ATUSB
tristate "ATUSB transceiver driver"
depends on IEEE802154_DRIVERS && MAC802154 && USB
- ---help---
+ help
Say Y here to enable the ATUSB IEEE 802.15.4 wireless
controller.
@@ -77,7 +77,7 @@ config IEEE802154_ADF7242
tristate "ADF7242 transceiver driver"
depends on IEEE802154_DRIVERS && MAC802154
depends on SPI
- ---help---
+ help
Say Y here to enable the ADF7242 SPI 802.15.4 wireless
controller.
@@ -89,7 +89,7 @@ config IEEE802154_CA8210
depends on IEEE802154_DRIVERS && MAC802154
depends on COMMON_CLK
depends on SPI
- ---help---
+ help
Say Y here to enable the CA8210 SPI 802.15.4 wireless
controller.
@@ -100,7 +100,7 @@ config IEEE802154_CA8210_DEBUGFS
bool "CA8210 debugfs interface"
depends on IEEE802154_CA8210
depends on DEBUG_FS
- ---help---
+ help
This option compiles debugfs code for the ca8210 driver. This
exposes a debugfs node for each CA8210 instance which allows
direct use of the Cascoda API, exposing the 802.15.4 MAC
@@ -110,7 +110,7 @@ config IEEE802154_MCR20A
tristate "MCR20A transceiver driver"
depends on IEEE802154_DRIVERS && MAC802154
depends on SPI
- ---help---
+ help
Say Y here to enable the MCR20A SPI 802.15.4 wireless
controller.
@@ -120,7 +120,7 @@ config IEEE802154_MCR20A
config IEEE802154_HWSIM
depends on IEEE802154_DRIVERS && MAC802154
tristate "Simulated radio testing tool for mac802154"
- ---help---
+ help
This driver is a developer testing tool that can be used to test
IEEE 802.15.4 networking stack (mac802154) functionality. This is not
needed for normal wpan usage and is only for testing.
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 047c27087b10..f25702386d83 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -134,7 +134,7 @@ config MDIO_GPIO
tristate "GPIO lib-based bitbanged MDIO buses"
depends on MDIO_BITBANG
depends on GPIOLIB || COMPILE_TEST
- ---help---
+ help
Supports GPIO lib-based MDIO busses.
To compile this driver as a module, choose M here: the module
@@ -265,7 +265,7 @@ config SWPHY
config LED_TRIGGER_PHY
bool "Support LED triggers for tracking link state"
depends on LEDS_TRIGGERS
- ---help---
+ help
Adds support for a set of LED trigger events per-PHY. Link
state change will trigger the events, for consumption by an
LED class driver. There are triggers for each link speed currently
@@ -298,12 +298,12 @@ config ADIN_PHY
config AMD_PHY
tristate "AMD PHYs"
- ---help---
+ help
Currently supports the am79c874
config AQUANTIA_PHY
tristate "Aquantia PHYs"
- ---help---
+ help
Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
config AX88796B_PHY
@@ -316,13 +316,13 @@ config BCM63XX_PHY
tristate "Broadcom 63xx SOCs internal PHY"
depends on BCM63XX || COMPILE_TEST
select BCM_NET_PHYLIB
- ---help---
+ help
Currently supports the 6348 and 6358 PHYs.
config BCM7XXX_PHY
tristate "Broadcom 7xxx SOCs internal PHYs"
select BCM_NET_PHYLIB
- ---help---
+ help
Currently supports the BCM7366, BCM7439, BCM7445, and
40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
@@ -336,7 +336,7 @@ config BCM_CYGNUS_PHY
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on MDIO_BCM_IPROC
select BCM_NET_PHYLIB
- ---help---
+ help
This PHY driver is for the 1G internal PHYs of the Broadcom
Cygnus and Omega Family SoC.
@@ -350,7 +350,7 @@ config BCM_NET_PHYLIB
config BROADCOM_PHY
tristate "Broadcom PHYs"
select BCM_NET_PHYLIB
- ---help---
+ help
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
BCM5481, BCM54810 and BCM5482 PHYs.
@@ -368,48 +368,48 @@ config BCM54140_PHY
config BCM84881_PHY
tristate "Broadcom BCM84881 PHY"
depends on PHYLIB
- ---help---
+ help
Support the Broadcom BCM84881 PHY.
config CICADA_PHY
tristate "Cicada PHYs"
- ---help---
+ help
Currently supports the cis8204
config CORTINA_PHY
tristate "Cortina EDC CDR 10G Ethernet PHY"
- ---help---
+ help
Currently supports the CS4340 phy.
config DAVICOM_PHY
tristate "Davicom PHYs"
- ---help---
+ help
Currently supports dm9161e and dm9131
config DP83822_PHY
tristate "Texas Instruments DP83822/825/826 PHYs"
- ---help---
+ help
Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S,
DP83826C and DP83826NC PHYs.
config DP83TC811_PHY
tristate "Texas Instruments DP83TC811 PHY"
- ---help---
+ help
Supports the DP83TC811 PHY.
config DP83848_PHY
tristate "Texas Instruments DP83848 PHY"
- ---help---
+ help
Supports the DP83848 PHY.
config DP83867_PHY
tristate "Texas Instruments DP83867 Gigabit PHY"
- ---help---
+ help
Currently supports the DP83867 PHY.
config DP83869_PHY
tristate "Texas Instruments DP83869 Gigabit PHY"
- ---help---
+ help
Currently supports the DP83869 PHY. This PHY supports copper and
fiber connections.
@@ -417,7 +417,7 @@ config FIXED_PHY
tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB
select SWPHY
- ---help---
+ help
Adds the platform "fixed" MDIO Bus to cover the boards that use
PHYs that are not connected to the real MDIO bus.
@@ -425,12 +425,12 @@ config FIXED_PHY
config ICPLUS_PHY
tristate "ICPlus PHYs"
- ---help---
+ help
Currently supports the IP175C and IP1001 PHYs.
config INTEL_XWAY_PHY
tristate "Intel XWAY PHYs"
- ---help---
+ help
Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
These PHYs are marked as standalone chips under the names
PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
@@ -438,33 +438,33 @@ config INTEL_XWAY_PHY
config LSI_ET1011C_PHY
tristate "LSI ET1011C PHY"
- ---help---
+ help
Supports the LSI ET1011C PHY.
config LXT_PHY
tristate "Intel LXT PHYs"
- ---help---
+ help
Currently supports the lxt970, lxt971
config MARVELL_PHY
tristate "Marvell PHYs"
- ---help---
+ help
Currently has a driver for the 88E1011S
config MARVELL_10G_PHY
tristate "Marvell Alaska 10Gbit PHYs"
- ---help---
+ help
Support for the Marvell Alaska MV88X3310 and compatible PHYs.
config MESON_GXL_PHY
tristate "Amlogic Meson GXL Internal PHY"
depends on ARCH_MESON || COMPILE_TEST
- ---help---
+ help
Currently has a driver for the Amlogic Meson GXL Internal PHY
config MICREL_PHY
tristate "Micrel PHYs"
- ---help---
+ help
Supports the KSZ9021, VSC8201, KS8001 PHYs.
config MICROCHIP_PHY
@@ -474,7 +474,7 @@ config MICROCHIP_PHY
config MICROCHIP_T1_PHY
tristate "Microchip T1 PHYs"
- ---help---
+ help
Supports the LAN87XX PHYs.
config MICROSEMI_PHY
@@ -482,18 +482,18 @@ config MICROSEMI_PHY
depends on MACSEC || MACSEC=n
select CRYPTO_AES
select CRYPTO_ECB
- ---help---
+ help
Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
config NATIONAL_PHY
tristate "National Semiconductor PHYs"
- ---help---
+ help
Currently supports the DP83865 PHY.
config NXP_TJA11XX_PHY
tristate "NXP TJA11xx PHYs support"
depends on HWMON
- ---help---
+ help
Currently supports the NXP TJA1100 and TJA1101 PHY.
config AT803X_PHY
@@ -504,47 +504,47 @@ config AT803X_PHY
config QSEMI_PHY
tristate "Quality Semiconductor PHYs"
- ---help---
+ help
Currently supports the qs6612
config REALTEK_PHY
tristate "Realtek PHYs"
- ---help---
+ help
Supports the Realtek 821x PHY.
config RENESAS_PHY
tristate "Driver for Renesas PHYs"
- ---help---
+ help
Supports the Renesas PHYs uPD60620 and uPD60620A.
config ROCKCHIP_PHY
tristate "Driver for Rockchip Ethernet PHYs"
- ---help---
+ help
Currently supports the integrated Ethernet PHY.
config SMSC_PHY
tristate "SMSC PHYs"
- ---help---
+ help
Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
config STE10XP
tristate "STMicroelectronics STe10Xp PHYs"
- ---help---
+ help
This is the driver for the STe100p and STe101p PHYs.
config TERANETICS_PHY
tristate "Teranetics PHYs"
- ---help---
+ help
Currently supports the Teranetics TN2020
config VITESSE_PHY
tristate "Vitesse PHYs"
- ---help---
+ help
Currently supports the vsc8244
config XILINX_GMII2RGMII
tristate "Xilinx GMII2RGMII converter driver"
- ---help---
+ help
This driver support xilinx GMII to RGMII IP core it provides
the Reduced Gigabit Media Independent Interface(RGMII) between
Ethernet physical media devices and the Gigabit Ethernet controller.
diff --git a/drivers/net/plip/Kconfig b/drivers/net/plip/Kconfig
index e03556d1d0c2..67bfb01de6f7 100644
--- a/drivers/net/plip/Kconfig
+++ b/drivers/net/plip/Kconfig
@@ -6,7 +6,7 @@
config PLIP
tristate "PLIP (parallel port) support"
depends on PARPORT
- ---help---
+ help
PLIP (Parallel Line Internet Protocol) is used to create a
reasonably fast mini network consisting of two (or, rarely, more)
local machines. A PLIP link from a Linux box is a popular means to
diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
index 1a2e2f7629f3..ac4d162d9455 100644
--- a/drivers/net/ppp/Kconfig
+++ b/drivers/net/ppp/Kconfig
@@ -6,7 +6,7 @@
config PPP
tristate "PPP (point-to-point protocol) support"
select SLHC
- ---help---
+ help
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
serial) lines. Ask your access provider if they support it, because
@@ -38,7 +38,7 @@ if PPP
config PPP_BSDCOMP
tristate "PPP BSD-Compress compression"
depends on PPP
- ---help---
+ help
Support for the BSD-Compress compression method for PPP, which uses
the LZW compression method to compress each PPP packet before it is
sent over the wire. The machine at the other end of the PPP link
@@ -59,7 +59,7 @@ config PPP_DEFLATE
depends on PPP
select ZLIB_INFLATE
select ZLIB_DEFLATE
- ---help---
+ help
Support for the Deflate compression method for PPP, which uses the
Deflate algorithm (the same algorithm that gzip uses) to compress
each PPP packet before it is sent over the wire. The machine at the
@@ -72,7 +72,7 @@ config PPP_DEFLATE
config PPP_FILTER
bool "PPP filtering"
depends on PPP
- ---help---
+ help
Say Y here if you want to be able to filter the packets passing over
PPP interfaces. This allows you to control which packets count as
activity (i.e. which packets will reset the idle timer or bring up
@@ -88,7 +88,7 @@ config PPP_MPPE
select CRYPTO
select CRYPTO_SHA1
select CRYPTO_LIB_ARC4
- ---help---
+ help
Support for the MPPE Encryption protocol, as employed by the
Microsoft Point-to-Point Tunneling Protocol.
@@ -98,7 +98,7 @@ config PPP_MPPE
config PPP_MULTILINK
bool "PPP multilink support"
depends on PPP
- ---help---
+ help
PPP multilink is a protocol (defined in RFC 1990) which allows you
to combine several (logical or physical) lines into one logical PPP
connection, so that you can utilize your full bandwidth.
@@ -111,7 +111,7 @@ config PPP_MULTILINK
config PPPOATM
tristate "PPP over ATM"
depends on ATM && PPP
- ---help---
+ help
Support PPP (Point to Point Protocol) encapsulated in ATM frames.
This implementation does not yet comply with section 8 of RFC2364,
which can lead to bad results if the ATM peer loses state and
@@ -120,7 +120,7 @@ config PPPOATM
config PPPOE
tristate "PPP over Ethernet"
depends on PPP
- ---help---
+ help
Support for PPP over Ethernet.
This driver requires the latest version of pppd from the CVS
@@ -132,7 +132,7 @@ config PPPOE
config PPTP
tristate "PPP over IPv4 (PPTP)"
depends on PPP && NET_IPGRE_DEMUX
- ---help---
+ help
Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
This driver requires pppd plugin to work in client mode or
@@ -143,7 +143,7 @@ config PPTP
config PPPOL2TP
tristate "PPP over L2TP"
depends on L2TP && PPP
- ---help---
+ help
Support for PPP-over-L2TP socket family. L2TP is a protocol
used by ISPs and enterprises to tunnel PPP traffic over UDP
tunnels. L2TP is replacing PPTP for VPN uses.
@@ -153,7 +153,7 @@ config PPP_ASYNC
tristate "PPP support for async serial ports"
depends on PPP
select CRC_CCITT
- ---help---
+ help
Say Y (or M) here if you want to be able to use PPP over standard
asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
a modem (not a synchronous or ISDN modem) to contact your ISP, you
@@ -166,7 +166,7 @@ config PPP_ASYNC
config PPP_SYNC_TTY
tristate "PPP support for sync tty ports"
depends on PPP
- ---help---
+ help
Say Y (or M) here if you want to be able to use PPP over synchronous
(HDLC) tty devices, such as the SyncLink adapter. These devices
are often used for high-speed leased lines like T1/E1.
diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig
index 30bbafb0e3c7..ea68fc15c945 100644
--- a/drivers/net/slip/Kconfig
+++ b/drivers/net/slip/Kconfig
@@ -6,7 +6,7 @@
config SLIP
tristate "SLIP (serial line) support"
depends on TTY
- ---help---
+ help
Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
connect to your Internet service provider or to connect to some
other local Unix box or if you want to configure your Linux box as a
@@ -36,7 +36,7 @@ config SLIP
config SLHC
tristate
- ---help---
+ help
This option enables Van Jacobsen serial line header compression
routines.
@@ -46,7 +46,7 @@ config SLIP_COMPRESSED
bool "CSLIP compressed headers"
depends on SLIP
select SLHC
- ---help---
+ help
This protocol is faster than SLIP because it uses compression on the
TCP/IP headers (not on the data itself), but it has to be supported
on both ends. Ask your access provider if you are not sure and
@@ -61,7 +61,7 @@ config SLIP_COMPRESSED
config SLIP_SMART
bool "Keepalive and linefill"
depends on SLIP
- ---help---
+ help
Adds additional capabilities to the SLIP driver to support the
RELCOM line fill and keepalive monitoring. Ideal on poor quality
analogue lines.
@@ -69,7 +69,7 @@ config SLIP_SMART
config SLIP_MODE_SLIP6
bool "Six bit SLIP encapsulation"
depends on SLIP
- ---help---
+ help
Just occasionally you may need to run IP over hostile serial
networks that don't pass all control characters or are only seven
bit. Saying Y here adds an extra mode you can use with SLIP:
diff --git a/drivers/net/team/Kconfig b/drivers/net/team/Kconfig
index 2aa9fd7b57df..4d449845dac7 100644
--- a/drivers/net/team/Kconfig
+++ b/drivers/net/team/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig NET_TEAM
tristate "Ethernet team driver support"
- ---help---
+ help
This allows one to create virtual interfaces that teams together
multiple ethernet devices.
@@ -18,7 +18,7 @@ if NET_TEAM
config NET_TEAM_MODE_BROADCAST
tristate "Broadcast mode support"
depends on NET_TEAM
- ---help---
+ help
Basic mode where packets are transmitted always by all suitable ports.
All added ports are setup to have team's device address.
@@ -29,7 +29,7 @@ config NET_TEAM_MODE_BROADCAST
config NET_TEAM_MODE_ROUNDROBIN
tristate "Round-robin mode support"
depends on NET_TEAM
- ---help---
+ help
Basic mode where port used for transmitting packets is selected in
round-robin fashion using packet counter.
@@ -41,7 +41,7 @@ config NET_TEAM_MODE_ROUNDROBIN
config NET_TEAM_MODE_RANDOM
tristate "Random mode support"
depends on NET_TEAM
- ---help---
+ help
Basic mode where port used for transmitting packets is selected
randomly.
@@ -53,7 +53,7 @@ config NET_TEAM_MODE_RANDOM
config NET_TEAM_MODE_ACTIVEBACKUP
tristate "Active-backup mode support"
depends on NET_TEAM
- ---help---
+ help
Only one port is active at a time and the rest of ports are used
for backup.
@@ -66,7 +66,7 @@ config NET_TEAM_MODE_ACTIVEBACKUP
config NET_TEAM_MODE_LOADBALANCE
tristate "Load-balance mode support"
depends on NET_TEAM
- ---help---
+ help
This mode provides load balancing functionality. Tx port selection
is done using BPF function set up from userspace (bpf_hash_func
option)
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 05bdcc5917f6..a7fbc3ccd29e 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -15,7 +15,7 @@ if USB_NET_DRIVERS
config USB_CATC
tristate "USB CATC NetMate-based Ethernet device support"
select CRC32
- ---help---
+ help
Say Y if you want to use one of the following 10Mbps USB Ethernet
device based on the EL1210A chip. Supported devices are:
Belkin F5U011
@@ -33,7 +33,7 @@ config USB_CATC
config USB_KAWETH
tristate "USB KLSI KL5USB101-based ethernet device support"
- ---help---
+ help
Say Y here if you want to use one of the following 10Mbps only
USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
3Com 3C19250
@@ -73,7 +73,7 @@ config USB_KAWETH
config USB_PEGASUS
tristate "USB Pegasus/Pegasus-II based ethernet device support"
select MII
- ---help---
+ help
Say Y here if you know you have Pegasus or Pegasus-II based adapter.
If in doubt then look at <file:drivers/net/usb/pegasus.h> for the
complete list of supported devices.
@@ -128,7 +128,7 @@ config USB_LAN78XX
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
select MII
- ---help---
+ help
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
that supports deep queues for efficient transfers. (This gives
@@ -321,7 +321,7 @@ config USB_NET_SR9800
tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
depends on USB_USBNET
select CRC32
- ---help---
+ help
Say Y if you want to use one of the following 100Mbps USB Ethernet
device based on the CoreChip-sz SR9800 chip.
@@ -570,7 +570,7 @@ config USB_CDC_PHONET
config USB_IPHETH
tristate "Apple iPhone USB Ethernet driver"
default n
- ---help---
+ help
Module used to share Internet connection (tethering) from your
iPhone (Original, 3G and 3GS) to your system.
Note that you need userspace libraries and programs that are needed
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 3e21726c36e8..39e5ab261d7c 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -5,7 +5,7 @@
menuconfig WAN
bool "Wan interfaces support"
- ---help---
+ help
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
lines, are used to interconnect Local Area Networks (LANs) over vast
distances with data transfer rates significantly higher than those
@@ -39,7 +39,7 @@ config HOSTESS_SV11
config COSA
tristate "COSA/SRP sync serial boards support"
depends on ISA && m && ISA_DMA_API && HDLC && VIRT_TO_BUS
- ---help---
+ help
Driver for COSA and SRP synchronous serial boards.
These boards allow to connect synchronous serial devices (for example
@@ -63,7 +63,7 @@ config COSA
config LANMEDIA
tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
depends on PCI && VIRT_TO_BUS && HDLC
- ---help---
+ help
Driver for the following Lan Media family of serial boards:
- LMC 1000 board allows you to connect synchronous serial devices
@@ -251,7 +251,7 @@ config C101
config FARSYNC
tristate "FarSync T-Series support"
depends on HDLC && PCI
- ---help---
+ help
Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
FarSite Communications Ltd.
@@ -323,7 +323,7 @@ config IXP4XX_HSS
config DLCI
tristate "Frame Relay DLCI support"
- ---help---
+ help
Support for the Frame Relay protocol.
Frame Relay is a fast low-cost way to connect to a remote Internet
@@ -370,7 +370,7 @@ config SDLA
config LAPBETHER
tristate "LAPB over Ethernet driver"
depends on LAPB && X25
- ---help---
+ help
Driver for a pseudo device (typically called /dev/lapb0) which allows
you to open an LAPB point-to-point connection to some other computer
on your Ethernet network.
@@ -386,7 +386,7 @@ config LAPBETHER
config X25_ASY
tristate "X.25 async driver"
depends on LAPB && X25 && TTY
- ---help---
+ help
Send and receive X.25 frames over regular asynchronous serial
lines such as telephone lines equipped with ordinary modems.
@@ -401,7 +401,7 @@ config X25_ASY
config SBNI
tristate "Granch SBNI12 Leased Line adapter support"
depends on X86
- ---help---
+ help
Driver for ISA SBNI12-xx cards which are low cost alternatives to
leased line modems.
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 15b0ad171f4c..8ab62bb6b853 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -9,7 +9,7 @@ menuconfig WLAN
depends on NET
select WIRELESS
default y
- ---help---
+ help
This section contains all the pre 802.11 and 802.11 wireless
device drivers. For a complete list of drivers and documentation
on them refer to the wireless wiki:
@@ -54,7 +54,7 @@ config PCMCIA_RAYCS
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
- ---help---
+ help
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
(PC-card) wireless Ethernet networking card to your computer.
Please read the file <file:Documentation/networking/ray_cs.rst> for
@@ -76,7 +76,7 @@ config PCMCIA_WL3501
config MAC80211_HWSIM
tristate "Simulated radio testing tool for mac80211"
depends on MAC80211
- ---help---
+ help
This driver is a developer testing tool that can be used to test
IEEE 802.11 networking stack (mac80211) functionality. This is not
needed for normal wireless LAN usage and is only for testing. See
@@ -94,7 +94,7 @@ config USB_NET_RNDIS_WLAN
select USB_USBNET
select USB_NET_CDCETHER
select USB_NET_RNDIS_HOST
- ---help---
+ help
This is a driver for wireless RNDIS devices.
These are USB based adapters found in devices such as:
@@ -118,7 +118,7 @@ config USB_NET_RNDIS_WLAN
config VIRT_WIFI
tristate "Wifi wrapper for ethernet drivers"
depends on CFG80211
- ---help---
+ help
This option adds support for ethernet connections to appear as if they
are wifi connections through a special rtnetlink device.
diff --git a/drivers/net/wireless/admtek/Kconfig b/drivers/net/wireless/admtek/Kconfig
index a91cc1459c96..678979a1d987 100644
--- a/drivers/net/wireless/admtek/Kconfig
+++ b/drivers/net/wireless/admtek/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ADMTEK
bool "ADMtek devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -17,7 +17,7 @@ config ADM8211
depends on MAC80211 && PCI
select CRC32
select EEPROM_93CX6
- ---help---
+ help
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index b10972b6cba4..6e9d46b96555 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -5,7 +5,7 @@ config ATH_COMMON
config WLAN_VENDOR_ATH
bool "Atheros/Qualcomm devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -25,7 +25,7 @@ if WLAN_VENDOR_ATH
config ATH_DEBUG
bool "Atheros wireless debugging"
- ---help---
+ help
Say Y, if you want to debug atheros wireless drivers.
Right now only ath9k makes use of this.
@@ -33,7 +33,7 @@ config ATH_TRACEPOINTS
bool "Atheros wireless tracing"
depends on ATH_DEBUG
depends on EVENT_TRACING
- ---help---
+ help
This option enables tracepoints for atheros wireless drivers.
Currently, ath9k makes use of this facility.
@@ -41,7 +41,7 @@ config ATH_REG_DYNAMIC_USER_REG_HINTS
bool "Atheros dynamic user regulatory hints"
depends on CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
Say N. This should only be enabled in countries where
this feature is explicitly allowed and only on cards that
specifically have been tested for this.
@@ -50,7 +50,7 @@ config ATH_REG_DYNAMIC_USER_CERT_TESTING
bool "Atheros dynamic user regulatory testing"
depends on ATH_REG_DYNAMIC_USER_REG_HINTS && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
Say N. This should only be enabled on systems
undergoing certification testing.
diff --git a/drivers/net/wireless/ath/ar5523/Kconfig b/drivers/net/wireless/ath/ar5523/Kconfig
index e82df5f1ea67..0d838c1e7b12 100644
--- a/drivers/net/wireless/ath/ar5523/Kconfig
+++ b/drivers/net/wireless/ath/ar5523/Kconfig
@@ -4,6 +4,6 @@ config AR5523
depends on MAC80211 && USB
select ATH_COMMON
select FW_LOADER
- ---help---
+ help
This module add support for AR5523 based USB dongles such as D-Link
DWL-G132, Netgear WPN111 and many more.
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index b99fd0eff994..40f91bc8514d 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -6,7 +6,7 @@ config ATH10K
select CRC32
select WANT_DEV_COREDUMP
select ATH10K_CE
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros IEEE 802.11ac family of chipsets.
@@ -18,25 +18,25 @@ config ATH10K_CE
config ATH10K_PCI
tristate "Atheros ath10k PCI support"
depends on ATH10K && PCI
- ---help---
+ help
This module adds support for PCIE bus
config ATH10K_AHB
bool "Atheros ath10k AHB support"
depends on ATH10K_PCI && OF && RESET_CONTROLLER
- ---help---
+ help
This module adds support for AHB bus
config ATH10K_SDIO
tristate "Atheros ath10k SDIO support"
depends on ATH10K && MMC
- ---help---
+ help
This module adds support for SDIO/MMC bus.
config ATH10K_USB
tristate "Atheros ath10k USB support (EXPERIMENTAL)"
depends on ATH10K && USB
- ---help---
+ help
This module adds experimental support for USB bus. Currently
work in progress and will not fully work.
@@ -45,14 +45,14 @@ config ATH10K_SNOC
depends on ATH10K
depends on ARCH_QCOM || COMPILE_TEST
select QCOM_QMI_HELPERS
- ---help---
+ help
This module adds support for integrated WCN3990 chip connected
to system NOC(SNOC).
config ATH10K_DEBUG
bool "Atheros ath10k debugging"
depends on ATH10K
- ---help---
+ help
Enables debug support
If unsure, say Y to make it easier to debug problems.
@@ -60,7 +60,7 @@ config ATH10K_DEBUG
config ATH10K_DEBUGFS
bool "Atheros ath10k debugfs support"
depends on ATH10K && DEBUG_FS
- ---help---
+ help
Enabled debugfs support
If unsure, say Y to make it easier to debug problems.
@@ -70,20 +70,20 @@ config ATH10K_SPECTRAL
depends on ATH10K_DEBUGFS
select RELAY
default n
- ---help---
+ help
Say Y to enable access to the FFT/spectral data via debugfs.
config ATH10K_TRACING
bool "Atheros ath10k tracing support"
depends on ATH10K
depends on EVENT_TRACING
- ---help---
+ help
Select this to ath10k use tracing infrastructure.
config ATH10K_DFS_CERTIFIED
bool "Atheros DFS support for certified platforms"
depends on ATH10K && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
This option enables DFS support for initiating radiation on
ath10k.
diff --git a/drivers/net/wireless/ath/ath11k/Kconfig b/drivers/net/wireless/ath/ath11k/Kconfig
index 738f99090d83..7acb42e2e6e2 100644
--- a/drivers/net/wireless/ath/ath11k/Kconfig
+++ b/drivers/net/wireless/ath/ath11k/Kconfig
@@ -7,7 +7,7 @@ config ATH11K
depends on ARCH_QCOM || COMPILE_TEST
select ATH_COMMON
select QCOM_QMI_HELPERS
- ---help---
+ help
This module adds support for Qualcomm Technologies 802.11ax family of
chipsets.
@@ -16,7 +16,7 @@ config ATH11K
config ATH11K_DEBUG
bool "QCA ath11k debugging"
depends on ATH11K
- ---help---
+ help
Enables debug support
If unsure, say Y to make it easier to debug problems.
@@ -24,7 +24,7 @@ config ATH11K_DEBUG
config ATH11K_DEBUGFS
bool "QCA ath11k debugfs support"
depends on ATH11K && DEBUG_FS && MAC80211_DEBUGFS
- ---help---
+ help
Enable ath11k debugfs support
If unsure, say Y to make it easier to debug problems.
@@ -32,5 +32,5 @@ config ATH11K_DEBUGFS
config ATH11K_TRACING
bool "ath11k tracing support"
depends on ATH11K && EVENT_TRACING
- ---help---
+ help
Select this to use ath11k tracing infrastructure.
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 96010d4b00e7..f35cd8de228e 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -8,7 +8,7 @@ config ATH5K
select NEW_LEDS
select ATH5K_AHB if ATH25
select ATH5K_PCI if !ATH25
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros 5xxx chipset.
@@ -25,7 +25,7 @@ config ATH5K
config ATH5K_DEBUG
bool "Atheros 5xxx debugging"
depends on ATH5K
- ---help---
+ help
Atheros 5xxx debugging messages.
Say Y, if and you will get debug options for ath5k.
@@ -45,7 +45,7 @@ config ATH5K_TRACER
bool "Atheros 5xxx tracer"
depends on ATH5K
depends on EVENT_TRACING
- ---help---
+ help
Say Y here to enable tracepoints for the ath5k driver
using the kernel tracing infrastructure. Select this
option if you are interested in debugging the driver.
@@ -55,21 +55,21 @@ config ATH5K_TRACER
config ATH5K_AHB
bool "Atheros 5xxx AHB bus support"
depends on ATH25 && ATH5K
- ---help---
+ help
This adds support for WiSoC type chipsets of the 5xxx Atheros
family.
config ATH5K_PCI
bool "Atheros 5xxx PCI bus support"
depends on (!ATH25 && PCI)
- ---help---
+ help
This adds support for PCI type chipsets of the 5xxx Atheros
family.
config ATH5K_TEST_CHANNELS
bool "Enables testing channels on ath5k"
depends on ATH5K && CFG80211_CERTIFICATION_ONUS
- ---help---
+ help
This enables non-standard IEEE 802.11 channels on ath5k, which
can be used for research purposes. This option should be disabled
unless doing research.
diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig
index 62c22fdcca38..cd96cf8d9940 100644
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
@@ -2,7 +2,7 @@
config ATH6KL
tristate "Atheros mobile chipsets support"
depends on CFG80211
- ---help---
+ help
This module adds core support for wireless adapters based on
Atheros AR6003 and AR6004 chipsets. You still need separate
bus drivers for USB and SDIO to be able to use real devices.
@@ -15,7 +15,7 @@ config ATH6KL_SDIO
tristate "Atheros ath6kl SDIO support"
depends on ATH6KL
depends on MMC
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros AR6003 and AR6004 chipsets running over SDIO. If you
choose to build it as a module, it will be called ath6kl_sdio.
@@ -26,7 +26,7 @@ config ATH6KL_USB
tristate "Atheros ath6kl USB support"
depends on ATH6KL
depends on USB
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros AR6004 chipset and chipsets based on it running over
USB. If you choose to build it as a module, it will be
@@ -35,7 +35,7 @@ config ATH6KL_USB
config ATH6KL_DEBUG
bool "Atheros ath6kl debugging"
depends on ATH6KL
- ---help---
+ help
Enables ath6kl debug support, including debug messages
enabled with debug_mask module parameter and debugfs
interface.
@@ -46,7 +46,7 @@ config ATH6KL_TRACING
bool "Atheros ath6kl tracing support"
depends on ATH6KL
depends on EVENT_TRACING
- ---help---
+ help
Select this to ath6kl use tracing infrastructure which, for
example, can be enabled with help of trace-cmd. All debug
messages and commands are delivered to using individually
@@ -58,7 +58,7 @@ config ATH6KL_REGDOMAIN
bool "Atheros ath6kl regdomain support"
depends on ATH6KL
depends on CFG80211_CERTIFICATION_ONUS
- ---help---
+ help
Enabling this makes it possible to change the regdomain in
the firmware. This can be only enabled if regulatory requirements
are taken into account.
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 78620c6b64a2..42bfdb4a6214 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -14,7 +14,7 @@ config ATH9K_BTCOEX_SUPPORT
bool "Atheros bluetooth coexistence support"
depends on (ATH9K || ATH9K_HTC)
default y
- ---help---
+ help
Say Y, if you want to use the ath9k/ath9k_htc radios together with
Bluetooth modules in the same system.
@@ -26,7 +26,7 @@ config ATH9K
select LEDS_CLASS
select NEW_LEDS
select ATH9K_COMMON
- ---help---
+ help
This module adds support for wireless adapters based on
Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
of chipsets. For a specific list of supported external
@@ -42,7 +42,7 @@ config ATH9K_PCI
bool "Atheros ath9k PCI/PCIe bus support"
default y
depends on ATH9K && PCI
- ---help---
+ help
This option enables the PCI bus support in ath9k.
Say Y, if you have a compatible PCI/PCIe wireless card.
@@ -51,7 +51,7 @@ config ATH9K_AHB
bool "Atheros ath9k AHB bus support"
depends on ATH9K
default n
- ---help---
+ help
This option enables the AHB bus support in ath9k.
Say Y, if you have a SoC with a compatible built-in
@@ -62,7 +62,7 @@ config ATH9K_DEBUGFS
depends on ATH9K && DEBUG_FS
select MAC80211_DEBUGFS
select ATH9K_COMMON_DEBUG
- ---help---
+ help
Say Y, if you need access to ath9k's statistics for
interrupts, rate control, etc.
@@ -74,14 +74,14 @@ config ATH9K_STATION_STATISTICS
depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
select MAC80211_DEBUGFS
default n
- ---help---
+ help
This option enables detailed statistics for association stations.
config ATH9K_TX99
bool "Atheros ath9k TX99 testing support"
depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
Say N. This should only be enabled on systems undergoing
certification testing and evaluation in a controlled environment.
Enabling this will only enable TX99 support, all other modes of
@@ -101,7 +101,7 @@ config ATH9K_DFS_CERTIFIED
bool "Atheros DFS support for certified platforms"
depends on ATH9K && CFG80211_CERTIFICATION_ONUS
default n
- ---help---
+ help
This option enables DFS support for initiating radiation on
ath9k. There is no way to dynamically detect if a card was DFS
certified and as such this is left as a build time option. This
@@ -120,7 +120,7 @@ config ATH9K_DYNACK
bool "Atheros ath9k ACK timeout estimation algorithm"
depends on ATH9K
default n
- ---help---
+ help
This option enables ath9k dynamic ACK timeout estimation algorithm
based on ACK frame RX timestamp, TX frame timestamp and frame
duration
@@ -129,7 +129,7 @@ config ATH9K_WOW
bool "Wake on Wireless LAN support (EXPERIMENTAL)"
depends on ATH9K && PM
default n
- ---help---
+ help
This option enables Wake on Wireless LAN support for certain cards.
Currently, AR9462 is supported.
@@ -147,7 +147,7 @@ config ATH9K_CHANNEL_CONTEXT
bool "Channel Context support"
depends on ATH9K
default n
- ---help---
+ help
This option enables channel context support in ath9k, which is needed
for multi-channel concurrency. Enable this if P2P PowerSave support
is required.
@@ -181,7 +181,7 @@ config ATH9K_HTC
select LEDS_CLASS
select NEW_LEDS
select ATH9K_COMMON
- ---help---
+ help
Support for Atheros HTC based cards.
Chipsets supported: AR9271
@@ -193,7 +193,7 @@ config ATH9K_HTC_DEBUGFS
bool "Atheros ath9k_htc debugging"
depends on ATH9K_HTC && DEBUG_FS
select ATH9K_COMMON_DEBUG
- ---help---
+ help
Say Y, if you need access to ath9k_htc's statistics.
As well as access to the FFT/spectral data.
@@ -201,7 +201,7 @@ config ATH9K_HWRNG
bool "Random number generator support"
depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K)
default n
- ---help---
+ help
This option incorporates the ADC register output as a source of
randomness into Linux entropy pool (/dev/urandom and /dev/random)
@@ -213,5 +213,5 @@ config ATH9K_COMMON_SPECTRAL
depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
select RELAY
default n
- ---help---
+ help
Say Y to enable access to the FFT/spectral data via debugfs.
diff --git a/drivers/net/wireless/ath/wcn36xx/Kconfig b/drivers/net/wireless/ath/wcn36xx/Kconfig
index a4b153470a2c..5832c7ef9352 100644
--- a/drivers/net/wireless/ath/wcn36xx/Kconfig
+++ b/drivers/net/wireless/ath/wcn36xx/Kconfig
@@ -4,7 +4,7 @@ config WCN36XX
depends on MAC80211 && HAS_DMA
depends on QCOM_WCNSS_CTRL || QCOM_WCNSS_CTRL=n
depends on RPMSG || RPMSG=n
- ---help---
+ help
This module adds support for wireless adapters based on
Qualcomm Atheros WCN3660 and WCN3680 mobile chipsets.
@@ -13,7 +13,7 @@ config WCN36XX
config WCN36XX_DEBUGFS
bool "WCN36XX debugfs support"
depends on WCN36XX
- ---help---
+ help
Enabled debugfs support
If unsure, say Y to make it easier to debug problems.
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
index 0d1a8dab30ed..dadba2d41bbb 100644
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -5,7 +5,7 @@ config WIL6210
depends on CFG80211
depends on PCI
default n
- ---help---
+ help
This module adds support for wireless adapter based on
wil6210 chip by Wilocity. It supports operation on the
60 GHz band, covered by the IEEE802.11ad standard.
@@ -19,7 +19,7 @@ config WIL6210_ISR_COR
bool "Use Clear-On-Read mode for ISR registers for wil6210"
depends on WIL6210
default y
- ---help---
+ help
ISR registers on wil6210 chip may operate in either
COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode.
For production code, use COR (say y); is default since
@@ -35,7 +35,7 @@ config WIL6210_TRACING
depends on WIL6210
depends on EVENT_TRACING
default n
- ---help---
+ help
Say Y here to enable tracepoints for the wil6210 driver
using the kernel tracing infrastructure. Select this
option if you are interested in debugging the driver.
@@ -47,7 +47,7 @@ config WIL6210_DEBUGFS
depends on WIL6210
depends on DEBUG_FS
default y
- ---help---
+ help
Say Y here to enable wil6210 debugfs support, using the
kernel debugfs infrastructure. Select this
option if you are interested in debugging the driver.
diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
index c2142c70f25d..ca45a1021cf4 100644
--- a/drivers/net/wireless/atmel/Kconfig
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ATMEL
bool "Atmel devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ config ATMEL
select WEXT_PRIV
select FW_LOADER
select CRC32
- ---help---
+ help
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
@@ -33,7 +33,7 @@ config ATMEL
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
- ---help---
+ help
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
@@ -43,7 +43,7 @@ config PCMCIA_ATMEL
select WIRELESS_EXT
select FW_LOADER
select CRC32
- ---help---
+ help
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
@@ -51,7 +51,7 @@ config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
- ---help---
+ help
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
diff --git a/drivers/net/wireless/broadcom/Kconfig b/drivers/net/wireless/broadcom/Kconfig
index bb1cb402a919..f74333366a90 100644
--- a/drivers/net/wireless/broadcom/Kconfig
+++ b/drivers/net/wireless/broadcom/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_BROADCOM
bool "Broadcom devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/broadcom/b43/Kconfig b/drivers/net/wireless/broadcom/b43/Kconfig
index 3b582e76762b..4559549b80fe 100644
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
@@ -6,7 +6,7 @@ config B43
select SSB if B43_SSB
select FW_LOADER
select CORDIC
- ---help---
+ help
b43 is a driver for the Broadcom 43xx series wireless devices.
Check "lspci" for something like
@@ -77,7 +77,7 @@ config B43_SDIO
bool "Broadcom 43xx SDIO device support"
depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
select SSB_SDIOHOST
- ---help---
+ help
Broadcom 43xx device support for Soft-MAC SDIO devices.
With this config option you can drive Soft-MAC b43 cards with a
@@ -108,7 +108,7 @@ config B43_PHY_G
bool "Support for G-PHY (802.11g) devices"
depends on B43 && B43_SSB
default y
- ---help---
+ help
This PHY type can be found in the following chipsets:
PCI: BCM4306, BCM4311, BCM4318
SoC: BCM4712, BCM5352E
@@ -117,7 +117,7 @@ config B43_PHY_N
bool "Support for N-PHY (the main 802.11n series) devices"
depends on B43
default y
- ---help---
+ help
This PHY type can be found in the following chipsets:
PCI: BCM4321, BCM4322,
BCM43222, BCM43224, BCM43225,
@@ -128,7 +128,7 @@ config B43_PHY_LP
bool "Support for LP-PHY (low-power 802.11g) devices"
depends on B43 && B43_SSB
default y
- ---help---
+ help
The LP-PHY is a low-power PHY built into some notebooks
and embedded devices. It supports 802.11a/b/g
(802.11a support is optional, and currently disabled).
@@ -137,13 +137,13 @@ config B43_PHY_HT
bool "Support for HT-PHY (high throughput 802.11n) devices"
depends on B43 && B43_BCMA
default y
- ---help---
+ help
This PHY type with 3x3:3 MIMO can be found in the BCM4331 PCI chipset.
config B43_PHY_LCN
bool "Support for LCN-PHY devices (BROKEN)"
depends on B43 && BROKEN
- ---help---
+ help
Support for the LCN-PHY.
Say N, this is BROKEN and crashes driver.
@@ -151,7 +151,7 @@ config B43_PHY_LCN
config B43_PHY_AC
bool "Support for AC-PHY (802.11ac) devices (BROKEN)"
depends on B43 && B43_BCMA && BROKEN
- ---help---
+ help
This PHY type can be found in the following chipsets:
PCI: BCM4352, BCM4360
@@ -174,7 +174,7 @@ config B43_HWRNG
config B43_DEBUG
bool "Broadcom 43xx debugging"
depends on B43
- ---help---
+ help
Broadcom 43xx debugging.
This adds additional runtime sanity checks and statistics to the driver.
diff --git a/drivers/net/wireless/broadcom/b43legacy/Kconfig b/drivers/net/wireless/broadcom/b43legacy/Kconfig
index bfac34142ab5..e4da34ec4f5b 100644
--- a/drivers/net/wireless/broadcom/b43legacy/Kconfig
+++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
@@ -4,7 +4,7 @@ config B43LEGACY
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
select SSB
select FW_LOADER
- ---help---
+ help
b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the
Linksys WPC54G V1 PCMCIA devices.
@@ -54,7 +54,7 @@ config B43LEGACY_DEBUG
bool "Broadcom 43xx-legacy debugging"
depends on B43LEGACY
default y
- ---help---
+ help
Say Y, because this information will help you get the driver running.
This option generates a minimum of log output.
@@ -75,7 +75,7 @@ config B43LEGACY_DMA_AND_PIO_MODE
bool "DMA + PIO"
select B43LEGACY_DMA
select B43LEGACY_PIO
- ---help---
+ help
Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
data transfer modes. The mode actually used is selectable through
the module parameter "pio". With pio=0 as a module parameter, the
@@ -86,14 +86,14 @@ config B43LEGACY_DMA_AND_PIO_MODE
config B43LEGACY_DMA_MODE
bool "DMA (Direct Memory Access) only"
select B43LEGACY_DMA
- ---help---
+ help
Only include Direct Memory Access (DMA).
This reduces the size of the driver module, by omitting the PIO code.
config B43LEGACY_PIO_MODE
bool "PIO (Programmed I/O) only"
select B43LEGACY_PIO
- ---help---
+ help
Only include Programmed I/O (PIO).
This reduces the size of the driver module, by omitting the DMA code.
Please note that PIO transfers are slow (compared to DMA).
diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index a5bf16c4f495..5bf2318763c5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -12,7 +12,7 @@ config BRCMSMAC
select BRCMUTIL
select FW_LOADER
select CORDIC
- ---help---
+ help
This module adds support for PCIe wireless adapters based on Broadcom
IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will
be available if you select BCMA_DRIVER_GPIO. If you choose to build a
@@ -23,7 +23,7 @@ source "drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig"
config BRCM_TRACING
bool "Broadcom device tracing"
depends on BRCMSMAC || BRCMFMAC
- ---help---
+ help
If you say Y here, the Broadcom wireless drivers will register
with ftrace to dump event information into the trace ringbuffer.
Tracing can be enabled at runtime to aid in debugging wireless
@@ -35,5 +35,5 @@ config BRCMDBG
bool "Broadcom driver debug functions"
depends on BRCMSMAC || BRCMFMAC
select WANT_DEV_COREDUMP if BRCMFMAC
- ---help---
+ help
Selecting this enables additional code for debug purposes.
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
index 7a3b3bb2ce15..681bfc2d740a 100644
--- a/drivers/net/wireless/cisco/Kconfig
+++ b/drivers/net/wireless/cisco/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_CISCO
bool "Cisco devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -20,7 +20,7 @@ config AIRO
select CRYPTO_SKCIPHER
select WEXT_SPY
select WEXT_PRIV
- ---help---
+ help
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
@@ -42,7 +42,7 @@ config AIRO_CS
select CRYPTO
select CRYPTO_AES
select CRYPTO_CTR
- ---help---
+ help
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
diff --git a/drivers/net/wireless/intel/Kconfig b/drivers/net/wireless/intel/Kconfig
index 6ec42f67d0f2..3d1d7d11a396 100644
--- a/drivers/net/wireless/intel/Kconfig
+++ b/drivers/net/wireless/intel/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_INTEL
bool "Intel devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/intel/ipw2x00/Kconfig b/drivers/net/wireless/intel/ipw2x00/Kconfig
index f42b3cdce611..d00386915a9d 100644
--- a/drivers/net/wireless/intel/ipw2x00/Kconfig
+++ b/drivers/net/wireless/intel/ipw2x00/Kconfig
@@ -12,7 +12,7 @@ config IPW2100
select FW_LOADER
select LIB80211
select LIBIPW
- ---help---
+ help
A driver for the Intel PRO/Wireless 2100 Network
Connection 802.11b wireless network adapter.
@@ -41,7 +41,7 @@ config IPW2100
config IPW2100_MONITOR
bool "Enable promiscuous mode"
depends on IPW2100
- ---help---
+ help
Enables promiscuous/monitor mode support for the ipw2100 driver.
With this feature compiled into the driver, you can switch to
promiscuous mode via the Wireless Tool's Monitor mode. While in this
@@ -50,7 +50,7 @@ config IPW2100_MONITOR
config IPW2100_DEBUG
bool "Enable full debugging output in IPW2100 module."
depends on IPW2100
- ---help---
+ help
This option will enable debug tracing output for the IPW2100.
This will result in the kernel module being ~60k larger. You can
@@ -74,7 +74,7 @@ config IPW2200
select FW_LOADER
select LIB80211
select LIBIPW
- ---help---
+ help
A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
Connection adapters.
@@ -103,7 +103,7 @@ config IPW2200
config IPW2200_MONITOR
bool "Enable promiscuous mode"
depends on IPW2200
- ---help---
+ help
Enables promiscuous/monitor mode support for the ipw2200 driver.
With this feature compiled into the driver, you can switch to
promiscuous mode via the Wireless Tool's Monitor mode. While in this
@@ -117,7 +117,7 @@ config IPW2200_PROMISCUOUS
bool "Enable creation of a RF radiotap promiscuous interface"
depends on IPW2200_MONITOR
select IPW2200_RADIOTAP
- ---help---
+ help
Enables the creation of a second interface prefixed 'rtap'.
This second interface will provide every received in radiotap
format.
@@ -144,7 +144,7 @@ config IPW2200_QOS
config IPW2200_DEBUG
bool "Enable full debugging output in IPW2200 module."
depends on IPW2200
- ---help---
+ help
This option will enable low level debug tracing output for IPW2200.
Note, normal debug code is already compiled in. This low level
@@ -170,7 +170,7 @@ config LIBIPW
select LIB80211_CRYPT_WEP
select LIB80211_CRYPT_TKIP
select LIB80211_CRYPT_CCMP
- ---help---
+ help
This option enables the hardware independent IEEE 802.11
networking stack. This component is deprecated in favor of the
mac80211 component.
@@ -178,7 +178,7 @@ config LIBIPW
config LIBIPW_DEBUG
bool "Full debugging output for the LIBIPW component"
depends on LIBIPW
- ---help---
+ help
This option will enable debug tracing output for the
libipw component.
diff --git a/drivers/net/wireless/intel/iwlegacy/Kconfig b/drivers/net/wireless/intel/iwlegacy/Kconfig
index 100f55858b13..24fe3f63c321 100644
--- a/drivers/net/wireless/intel/iwlegacy/Kconfig
+++ b/drivers/net/wireless/intel/iwlegacy/Kconfig
@@ -11,7 +11,7 @@ config IWL4965
tristate "Intel Wireless WiFi 4965AGN (iwl4965)"
depends on PCI && MAC80211
select IWLEGACY
- ---help---
+ help
This option enables support for
Select to build the driver supporting the:
@@ -39,7 +39,7 @@ config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
depends on PCI && MAC80211
select IWLEGACY
- ---help---
+ help
Select to build the driver supporting the:
Intel PRO/Wireless 3945ABG/BG Network Connection
@@ -67,7 +67,7 @@ menu "iwl3945 / iwl4965 Debugging Options"
config IWLEGACY_DEBUG
bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers"
depends on IWLEGACY
- ---help---
+ help
This option will enable debug tracing output for the iwlegacy
drivers.
@@ -93,7 +93,7 @@ config IWLEGACY_DEBUG
config IWLEGACY_DEBUGFS
bool "iwlegacy (iwl 3945/4965) debugfs support"
depends on IWLEGACY && MAC80211_DEBUGFS
- ---help---
+ help
Enable creation of debugfs files for the iwlegacy drivers. This
is a low-impact option that allows getting insight into the
driver's state at runtime.
diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig
index 091d621ad25f..36153fa5f96a 100644
--- a/drivers/net/wireless/intel/iwlwifi/Kconfig
+++ b/drivers/net/wireless/intel/iwlwifi/Kconfig
@@ -3,7 +3,7 @@ config IWLWIFI
tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) "
depends on PCI && HAS_IOMEM && CFG80211
select FW_LOADER
- ---help---
+ help
Select to build the driver supporting the:
Intel Wireless WiFi Link Next-Gen AGN
@@ -96,7 +96,7 @@ menu "Debugging Options"
config IWLWIFI_DEBUG
bool "Enable full debugging output in the iwlwifi driver"
- ---help---
+ help
This option will enable debug tracing output for the iwlwifi drivers
This will result in the kernel module being ~100k larger. You can
@@ -121,7 +121,7 @@ config IWLWIFI_DEBUG
config IWLWIFI_DEBUGFS
bool "iwlwifi debugfs support"
depends on MAC80211_DEBUGFS
- ---help---
+ help
Enable creation of debugfs files for the iwlwifi drivers. This
is a low-impact option that allows getting insight into the
driver's state at runtime.
diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig
index 4e968912e27c..6a6ce9d4aeee 100644
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_INTERSIL
bool "Intersil devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config PRISM54
select WEXT_SPY
select WEXT_PRIV
select FW_LOADER
- ---help---
+ help
This enables support for FullMAC PCI/Cardbus prism54 devices. This
driver is now deprecated in favor for the SoftMAC driver, p54pci.
p54pci supports FullMAC PCI/Cardbus devices as well.
diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig
index c70dc168dc63..6ad88299432f 100644
--- a/drivers/net/wireless/intersil/hostap/Kconfig
+++ b/drivers/net/wireless/intersil/hostap/Kconfig
@@ -15,7 +15,7 @@ config HOSTAP
select LIB80211_CRYPT_WEP
select LIB80211_CRYPT_TKIP
select LIB80211_CRYPT_CCMP
- ---help---
+ help
Shared driver code for IEEE 802.11b wireless cards based on
Intersil Prism2/2.5/3 chipset. This driver supports so called
Host AP mode that allows the card to act as an IEEE 802.11
@@ -36,7 +36,7 @@ config HOSTAP
config HOSTAP_FIRMWARE
bool "Support downloading firmware images with Host AP driver"
depends on HOSTAP
- ---help---
+ help
Configure Host AP driver to include support for firmware image
download. This option by itself only enables downloading to the
volatile memory, i.e. the card RAM. This option is required to
@@ -49,7 +49,7 @@ config HOSTAP_FIRMWARE
config HOSTAP_FIRMWARE_NVRAM
bool "Support for non-volatile firmware download"
depends on HOSTAP_FIRMWARE
- ---help---
+ help
Allow Host AP driver to write firmware images to the non-volatile
card memory, i.e. flash memory that survives power cycling.
Enable this option if you want to be able to change card firmware
@@ -61,7 +61,7 @@ config HOSTAP_FIRMWARE_NVRAM
config HOSTAP_PLX
tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
depends on PCI && HOSTAP
- ---help---
+ help
Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
PCI adaptors.
@@ -75,7 +75,7 @@ config HOSTAP_PLX
config HOSTAP_PCI
tristate "Host AP driver for Prism2.5 PCI adaptors"
depends on PCI && HOSTAP
- ---help---
+ help
Host AP driver's version for Prism2.5 PCI adaptors.
"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
@@ -88,7 +88,7 @@ config HOSTAP_PCI
config HOSTAP_CS
tristate "Host AP driver for Prism2/2.5/3 PC Cards"
depends on PCMCIA && HOSTAP
- ---help---
+ help
Host AP driver's version for Prism2/2.5/3 PC Cards.
"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig
index c430d7a46730..c470ee23673f 100644
--- a/drivers/net/wireless/intersil/orinoco/Kconfig
+++ b/drivers/net/wireless/intersil/orinoco/Kconfig
@@ -10,7 +10,7 @@ config HERMES
select FW_LOADER
select CRYPTO
select CRYPTO_MICHAEL_MIC
- ---help---
+ help
A driver for 802.11b wireless cards based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
@@ -32,7 +32,7 @@ config HERMES
config HERMES_PRISM
bool "Support Prism 2/2.5 chipset"
depends on HERMES
- ---help---
+ help
Say Y to enable support for Prism 2 and 2.5 chipsets. These
chipsets are better handled by the hostap driver. This driver
@@ -44,7 +44,7 @@ config HERMES_CACHE_FW_ON_INIT
bool "Cache Hermes firmware on driver initialisation"
depends on HERMES
default y
- ---help---
+ help
Say Y to cache any firmware required by the Hermes drivers
on startup. The firmware will remain cached until the
driver is unloaded. The cache uses 64K of RAM.
@@ -110,7 +110,7 @@ config PCI_HERMES
config PCMCIA_HERMES
tristate "Hermes PCMCIA card support"
depends on PCMCIA && HERMES && HAS_IOPORT_MAP
- ---help---
+ help
A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
@@ -125,7 +125,7 @@ config PCMCIA_HERMES
config PCMCIA_SPECTRUM
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
depends on PCMCIA && HERMES && HAS_IOPORT_MAP
- ---help---
+ help
This is a driver for 802.11b cards using RAM-loadable Symbol
firmware, such as Symbol Wireless Networker LA4100, CompactFlash
@@ -139,5 +139,5 @@ config ORINOCO_USB
tristate "Agere Orinoco USB support"
depends on USB && HERMES
select FW_LOADER
- ---help---
+ help
This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/intersil/p54/Kconfig b/drivers/net/wireless/intersil/p54/Kconfig
index 26cd80732afa..024be5507daf 100644
--- a/drivers/net/wireless/intersil/p54/Kconfig
+++ b/drivers/net/wireless/intersil/p54/Kconfig
@@ -4,7 +4,7 @@ config P54_COMMON
depends on MAC80211
select FW_LOADER
select CRC_CCITT
- ---help---
+ help
This is common code for isl38xx/stlc45xx based modules.
This module does nothing by itself - the USB/PCI/SPI front-ends
also need to be enabled in order to support any devices.
@@ -18,7 +18,7 @@ config P54_USB
tristate "Prism54 USB support"
depends on P54_COMMON && USB
select CRC32
- ---help---
+ help
This driver is for USB isl38xx based wireless cards.
These devices require softmac firmware which can be found at
@@ -29,7 +29,7 @@ config P54_USB
config P54_PCI
tristate "Prism54 PCI support"
depends on P54_COMMON && PCI
- ---help---
+ help
This driver is for PCI isl38xx based wireless cards.
This driver supports most devices that are supported by the
fullmac prism54 driver plus many devices which are not
@@ -43,7 +43,7 @@ config P54_PCI
config P54_SPI
tristate "Prism54 SPI (stlc45xx) support"
depends on P54_COMMON && SPI_MASTER
- ---help---
+ help
This driver is for stlc4550 or stlc4560 based wireless chips
such as Nokia's N800/N810 Portable Internet Tablet.
@@ -53,7 +53,7 @@ config P54_SPI_DEFAULT_EEPROM
bool "Include fallback EEPROM blob"
depends on P54_SPI
default n
- ---help---
+ help
Unlike the PCI or USB devices, the SPI variants don't have
a dedicated EEPROM chip to store all device specific values
for calibration, country and interface settings.
diff --git a/drivers/net/wireless/marvell/Kconfig b/drivers/net/wireless/marvell/Kconfig
index dff82fdbea78..864bc0f6d4d4 100644
--- a/drivers/net/wireless/marvell/Kconfig
+++ b/drivers/net/wireless/marvell/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_MARVELL
bool "Marvell devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -19,7 +19,7 @@ source "drivers/net/wireless/marvell/mwifiex/Kconfig"
config MWL8K
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
depends on MAC80211 && PCI
- ---help---
+ help
This driver supports Marvell TOPDOG 802.11 wireless cards.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/net/wireless/marvell/libertas/Kconfig b/drivers/net/wireless/marvell/libertas/Kconfig
index b9fe598130c3..6d62ab49aa8d 100644
--- a/drivers/net/wireless/marvell/libertas/Kconfig
+++ b/drivers/net/wireless/marvell/libertas/Kconfig
@@ -6,37 +6,37 @@ config LIBERTAS
select WEXT_SPY
select LIB80211
select FW_LOADER
- ---help---
+ help
A library for Marvell Libertas 8xxx devices.
config LIBERTAS_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards"
depends on LIBERTAS && USB
- ---help---
+ help
A driver for Marvell Libertas 8388 USB devices.
config LIBERTAS_CS
tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
depends on LIBERTAS && PCMCIA && HAS_IOPORT_MAP
- ---help---
+ help
A driver for Marvell Libertas 8385 CompactFlash devices.
config LIBERTAS_SDIO
tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
depends on LIBERTAS && MMC
- ---help---
+ help
A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
config LIBERTAS_SPI
tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
depends on LIBERTAS && SPI
- ---help---
+ help
A driver for Marvell Libertas 8686 SPI devices.
config LIBERTAS_DEBUG
bool "Enable full debugging output in the Libertas module."
depends on LIBERTAS
- ---help---
+ help
Debugging support.
config LIBERTAS_MESH
diff --git a/drivers/net/wireless/marvell/libertas_tf/Kconfig b/drivers/net/wireless/marvell/libertas_tf/Kconfig
index aa40d65f611a..345da4a6ee8d 100644
--- a/drivers/net/wireless/marvell/libertas_tf/Kconfig
+++ b/drivers/net/wireless/marvell/libertas_tf/Kconfig
@@ -3,17 +3,17 @@ config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
depends on MAC80211
select FW_LOADER
- ---help---
+ help
A library for Marvell Libertas 8xxx devices using thinfirm.
config LIBERTAS_THINFIRM_DEBUG
bool "Enable full debugging output in the Libertas thin firmware module."
depends on LIBERTAS_THINFIRM
- ---help---
+ help
Debugging support.
config LIBERTAS_THINFIRM_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
depends on LIBERTAS_THINFIRM && USB
- ---help---
+ help
A driver for Marvell Libertas 8388 USB devices using thinfirm.
diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig
index 64d8a11ad1e7..2b4ff2b78a7e 100644
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
@@ -2,7 +2,7 @@
config MWIFIEX
tristate "Marvell WiFi-Ex Driver"
depends on CFG80211
- ---help---
+ help
This adds support for wireless adapters based on Marvell
802.11n/ac chipsets.
@@ -14,7 +14,7 @@ config MWIFIEX_SDIO
depends on MWIFIEX && MMC
select FW_LOADER
select WANT_DEV_COREDUMP
- ---help---
+ help
This adds support for wireless adapters based on Marvell
8786/8787/8797/8887/8897/8977/8987/8997 chipsets with SDIO interface.
@@ -26,7 +26,7 @@ config MWIFIEX_PCIE
depends on MWIFIEX && PCI
select FW_LOADER
select WANT_DEV_COREDUMP
- ---help---
+ help
This adds support for wireless adapters based on Marvell
8766/8897/8997 chipsets with PCIe interface.
@@ -37,7 +37,7 @@ config MWIFIEX_USB
tristate "Marvell WiFi-Ex Driver for USB8766/8797/8997"
depends on MWIFIEX && USB
select FW_LOADER
- ---help---
+ help
This adds support for wireless adapters based on Marvell
8797/8997 chipset with USB interface.
diff --git a/drivers/net/wireless/mediatek/Kconfig b/drivers/net/wireless/mediatek/Kconfig
index 02d1120f148f..bd4db128248e 100644
--- a/drivers/net/wireless/mediatek/Kconfig
+++ b/drivers/net/wireless/mediatek/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_MEDIATEK
bool "MediaTek devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/mediatek/mt7601u/Kconfig b/drivers/net/wireless/mediatek/mt7601u/Kconfig
index 0b230f303d53..4a8b96280670 100644
--- a/drivers/net/wireless/mediatek/mt7601u/Kconfig
+++ b/drivers/net/wireless/mediatek/mt7601u/Kconfig
@@ -3,5 +3,5 @@ config MT7601U
tristate "MediaTek MT7601U (USB) support"
depends on MAC80211
depends on USB
- ---help---
+ help
This adds support for MT7601U-based wireless USB dongles.
diff --git a/drivers/net/wireless/ralink/Kconfig b/drivers/net/wireless/ralink/Kconfig
index 92eec8fff8fd..135a191c435d 100644
--- a/drivers/net/wireless/ralink/Kconfig
+++ b/drivers/net/wireless/ralink/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_RALINK
bool "Ralink devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/ralink/rt2x00/Kconfig b/drivers/net/wireless/ralink/rt2x00/Kconfig
index d4969d617822..dcccc290a7f5 100644
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
@@ -2,7 +2,7 @@
menuconfig RT2X00
tristate "Ralink driver support"
depends on MAC80211 && HAS_DMA
- ---help---
+ help
This will enable the support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
@@ -24,7 +24,7 @@ config RT2400PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
@@ -36,7 +36,7 @@ config RT2500PCI
select RT2X00_LIB_MMIO
select RT2X00_LIB_PCI
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
@@ -51,7 +51,7 @@ config RT61PCI
select RT2X00_LIB_CRYPTO
select CRC_ITU_T
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
@@ -68,7 +68,7 @@ config RT2800PCI
select RT2X00_LIB_CRYPTO
select CRC_CCITT
select EEPROM_93CX6
- ---help---
+ help
This adds support for rt27xx/rt28xx/rt30xx wireless chipset family.
Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890, RT3052,
RT3090, RT3091 & RT3092
@@ -80,7 +80,7 @@ if RT2800PCI
config RT2800PCI_RT33XX
bool "rt2800pci - Include support for rt33xx devices"
default y
- ---help---
+ help
This adds support for rt33xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT3390
@@ -88,7 +88,7 @@ config RT2800PCI_RT33XX
config RT2800PCI_RT35XX
bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt35xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT3060, RT3062, RT3562, RT3592
@@ -97,7 +97,7 @@ config RT2800PCI_RT35XX
config RT2800PCI_RT53XX
bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt53xx wireless chipset family to the
rt2800pci driver.
Supported chips: RT5390
@@ -105,7 +105,7 @@ config RT2800PCI_RT53XX
config RT2800PCI_RT3290
bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt3290 wireless chipset family to the
rt2800pci driver.
Supported chips: RT3290
@@ -116,7 +116,7 @@ config RT2500USB
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_CRYPTO
- ---help---
+ help
This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572.
@@ -129,7 +129,7 @@ config RT73USB
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_ITU_T
- ---help---
+ help
This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671.
@@ -143,7 +143,7 @@ config RT2800USB
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
- ---help---
+ help
This adds support for rt27xx/rt28xx/rt30xx wireless chipset family.
Supported chips: RT2770, RT2870 & RT3070, RT3071 & RT3072
@@ -154,7 +154,7 @@ if RT2800USB
config RT2800USB_RT33XX
bool "rt2800usb - Include support for rt33xx devices"
default y
- ---help---
+ help
This adds support for rt33xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT3370
@@ -162,27 +162,27 @@ config RT2800USB_RT33XX
config RT2800USB_RT35XX
bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)"
default y
- ---help---
+ help
This adds support for rt35xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT3572
config RT2800USB_RT3573
bool "rt2800usb - Include support for rt3573 devices (EXPERIMENTAL)"
- ---help---
+ help
This enables support for RT3573 chipset based wireless USB devices
in the rt2800usb driver.
config RT2800USB_RT53XX
bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
- ---help---
+ help
This adds support for rt53xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT5370
config RT2800USB_RT55XX
bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)"
- ---help---
+ help
This adds support for rt55xx wireless chipset family to the
rt2800usb driver.
Supported chips: RT5572
@@ -190,7 +190,7 @@ config RT2800USB_RT55XX
config RT2800USB_UNKNOWN
bool "rt2800usb - Include support for unknown (USB) devices"
default n
- ---help---
+ help
This adds support for rt2800usb devices that are known to
have a rt28xx family compatible chipset, but for which the exact
chipset is unknown.
@@ -209,7 +209,7 @@ config RT2800SOC
select RT2X00_LIB_FIRMWARE
select RT2800_LIB
select RT2800_LIB_MMIO
- ---help---
+ help
This adds support for Ralink WiSoC devices.
Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352.
@@ -256,7 +256,7 @@ config RT2X00_LIB_LEDS
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
depends on RT2X00_LIB && MAC80211_DEBUGFS
- ---help---
+ help
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 hardware.
@@ -264,7 +264,7 @@ config RT2X00_LIB_DEBUGFS
config RT2X00_DEBUG
bool "Ralink debug output"
depends on RT2X00_LIB
- ---help---
+ help
Enable debugging output for all rt2x00 modules
endif
diff --git a/drivers/net/wireless/realtek/Kconfig b/drivers/net/wireless/realtek/Kconfig
index 8ea2d8d7e356..474843277fa1 100644
--- a/drivers/net/wireless/realtek/Kconfig
+++ b/drivers/net/wireless/realtek/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_REALTEK
bool "Realtek devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/realtek/rtl818x/Kconfig b/drivers/net/wireless/realtek/rtl818x/Kconfig
index e1aa3fc71e66..603812c9a43e 100644
--- a/drivers/net/wireless/realtek/rtl818x/Kconfig
+++ b/drivers/net/wireless/realtek/rtl818x/Kconfig
@@ -6,7 +6,7 @@ config RTL8180
tristate "Realtek 8180/8185/8187SE PCI support"
depends on MAC80211 && PCI
select EEPROM_93CX6
- ---help---
+ help
This is a driver for RTL8180, RTL8185 and RTL8187SE based cards.
These are PCI based chips found in cards such as:
@@ -62,7 +62,7 @@ config RTL8187
tristate "Realtek 8187 and 8187B USB support"
depends on MAC80211 && USB
select EEPROM_93CX6
- ---help---
+ help
This is a driver for RTL8187 and RTL8187B based cards.
These are USB based chips found in devices such as:
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
index 32d151cde618..a263507a77a6 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
+++ b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
@@ -5,7 +5,7 @@
config RTL8XXXU
tristate "RTL8723AU/RTL8188[CR]U/RTL819[12]CU (mac80211) support"
depends on MAC80211 && USB
- ---help---
+ help
This is an alternative driver for various Realtek RTL8XXX
parts written to utilize the Linux mac80211 stack.
The driver is known to work with a number of RTL8723AU,
@@ -27,7 +27,7 @@ config RTL8XXXU
config RTL8XXXU_UNTESTED
bool "Include support for untested Realtek 8xxx USB devices (EXPERIMENTAL)"
depends on RTL8XXXU
- ---help---
+ help
This option enables detection of Realtek 8723/8188/8191/8192 WiFi
USB devices which have not been tested directly by the driver
author or reported to be working by third parties.
diff --git a/drivers/net/wireless/realtek/rtlwifi/Kconfig b/drivers/net/wireless/realtek/rtlwifi/Kconfig
index 28c247f7f6f8..9f6a4e35543c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/Kconfig
+++ b/drivers/net/wireless/realtek/rtlwifi/Kconfig
@@ -3,7 +3,7 @@ menuconfig RTL_CARDS
tristate "Realtek rtlwifi family of devices"
depends on MAC80211 && (PCI || USB)
default y
- ---help---
+ help
This option will enable support for the Realtek mac80211-based
wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de,
rtl8723ae, rtl8723be, rtl8188ee, rtl8192ee, and rtl8821ae share
@@ -17,7 +17,7 @@ config RTL8192CE
select RTL8192C_COMMON
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
wireless network adapters.
@@ -28,7 +28,7 @@ config RTL8192SE
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe
wireless network adapters.
@@ -39,7 +39,7 @@ config RTL8192DE
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe
wireless network adapters.
@@ -52,7 +52,7 @@ config RTL8723AE
select RTLWIFI_PCI
select RTL8723_COMMON
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8723AE 802.11n PCIe
wireless network adapters.
@@ -65,7 +65,7 @@ config RTL8723BE
select RTLWIFI_PCI
select RTL8723_COMMON
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8723BE 802.11n PCIe
wireless network adapters.
@@ -76,7 +76,7 @@ config RTL8188EE
depends on PCI
select RTLWIFI
select RTLWIFI_PCI
- ---help---
+ help
This is the driver for Realtek RTL8188EE 802.11n PCIe
wireless network adapters.
@@ -88,7 +88,7 @@ config RTL8192EE
select RTLWIFI
select RTLWIFI_PCI
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8192EE 802.11n PCIe
wireless network adapters.
@@ -100,7 +100,7 @@ config RTL8821AE
select RTLWIFI
select RTLWIFI_PCI
select RTLBTCOEXIST
- ---help---
+ help
This is the driver for Realtek RTL8821AE/RTL8812AE 802.11ac PCIe
wireless network adapters.
@@ -112,7 +112,7 @@ config RTL8192CU
select RTLWIFI
select RTLWIFI_USB
select RTL8192C_COMMON
- ---help---
+ help
This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB
wireless network adapters.
@@ -132,7 +132,7 @@ config RTLWIFI_DEBUG
bool "Debugging output for rtlwifi driver family"
depends on RTLWIFI
default y
- ---help---
+ help
To use the module option that sets the dynamic-debugging level for,
the front-end driver, this parameter must be "Y". For memory-limited
systems, choose "N". If in doubt, choose "Y".
diff --git a/drivers/net/wireless/rsi/Kconfig b/drivers/net/wireless/rsi/Kconfig
index ad5d34350cf9..09a592409204 100644
--- a/drivers/net/wireless/rsi/Kconfig
+++ b/drivers/net/wireless/rsi/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_RSI
bool "Redpine Signals Inc devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -16,7 +16,7 @@ config RSI_91X
tristate "Redpine Signals Inc 91x WLAN driver support"
select BT_HCIRSI if RSI_COEX
depends on MAC80211
- ---help---
+ help
This option enabes support for RSI 1x1 devices.
Select M (recommended), if you have a RSI 1x1 wireless module.
@@ -24,7 +24,7 @@ config RSI_DEBUGFS
bool "Redpine Signals Inc debug support"
depends on RSI_91X
default y
- ---help---
+ help
Say Y, if you would like to enable debug support. This option
creates debugfs entries
@@ -32,7 +32,7 @@ config RSI_SDIO
tristate "Redpine Signals SDIO bus support"
depends on MMC && RSI_91X
default m
- ---help---
+ help
This option enables the SDIO bus support in rsi drivers.
Select M (recommended), if you have a RSI 1x1 wireless module.
@@ -40,7 +40,7 @@ config RSI_USB
tristate "Redpine Signals USB bus support"
depends on USB && RSI_91X
default m
- ---help---
+ help
This option enables the USB bus support in rsi drivers.
Select M (recommended), if you have a RSI 1x1 wireless module.
@@ -49,7 +49,7 @@ config RSI_COEX
depends on BT && RSI_91X
depends on !(BT=m && RSI_91X=y)
default y
- ---help---
+ help
This option enables the WLAN BT coex support in rsi drivers.
Select M (recommended), if you have want to use this feature
and you have RS9113 module.
diff --git a/drivers/net/wireless/st/Kconfig b/drivers/net/wireless/st/Kconfig
index 441d1b8e7b80..cd647a533d0e 100644
--- a/drivers/net/wireless/st/Kconfig
+++ b/drivers/net/wireless/st/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ST
bool "STMicroelectronics devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig
index b81f2e41a63a..7c0b17a76fe2 100644
--- a/drivers/net/wireless/ti/Kconfig
+++ b/drivers/net/wireless/ti/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_TI
bool "Texas Instrument devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -22,7 +22,7 @@ config WILINK_PLATFORM_DATA
bool "TI WiLink platform data"
depends on WLCORE_SDIO || WL1251_SDIO
default y
- ---help---
+ help
Small platform data bit needed to pass data to the sdio modules.
diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig
index 7d39f0a4ba5b..de1c70e10cda 100644
--- a/drivers/net/wireless/ti/wl1251/Kconfig
+++ b/drivers/net/wireless/ti/wl1251/Kconfig
@@ -4,7 +4,7 @@ config WL1251
depends on MAC80211
select FW_LOADER
select CRC7
- ---help---
+ help
This will enable TI wl1251 driver support. The drivers make
use of the mac80211 stack.
@@ -14,7 +14,7 @@ config WL1251
config WL1251_SPI
tristate "TI wl1251 SPI support"
depends on WL1251 && SPI_MASTER
- ---help---
+ help
This module adds support for the SPI interface of adapters using
TI wl1251 chipset. Select this if your platform is using
the SPI bus.
@@ -25,7 +25,7 @@ config WL1251_SPI
config WL1251_SDIO
tristate "TI wl1251 SDIO support"
depends on WL1251 && MMC
- ---help---
+ help
This module adds support for the SDIO interface of adapters using
TI wl1251 chipset. Select this if your platform is using
the SDIO bus.
diff --git a/drivers/net/wireless/ti/wl12xx/Kconfig b/drivers/net/wireless/ti/wl12xx/Kconfig
index 9c4511604b67..786fff288505 100644
--- a/drivers/net/wireless/ti/wl12xx/Kconfig
+++ b/drivers/net/wireless/ti/wl12xx/Kconfig
@@ -3,7 +3,7 @@ config WL12XX
tristate "TI wl12xx support"
depends on MAC80211
select WLCORE
- ---help---
+ help
This module adds support for wireless adapters based on TI wl1271,
wl1273, wl1281 and wl1283 chipsets. This module does *not* include
support for wl1251. For wl1251 support, use the separate homonymous
diff --git a/drivers/net/wireless/ti/wl18xx/Kconfig b/drivers/net/wireless/ti/wl18xx/Kconfig
index e29aa2a3ba8a..98fe188dfb41 100644
--- a/drivers/net/wireless/ti/wl18xx/Kconfig
+++ b/drivers/net/wireless/ti/wl18xx/Kconfig
@@ -3,6 +3,6 @@ config WL18XX
tristate "TI wl18xx support"
depends on MAC80211
select WLCORE
- ---help---
+ help
This module adds support for wireless adapters based on TI
WiLink 8 chipsets.
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index a9db1288221c..8094323256fb 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -3,7 +3,7 @@ config WLCORE
tristate "TI wlcore support"
depends on MAC80211
select FW_LOADER
- ---help---
+ help
This module contains the main code for TI WLAN chips. It abstracts
hardware-specific differences among different chipset families.
Each chipset family needs to implement its own lower-level module
@@ -16,7 +16,7 @@ config WLCORE_SPI
tristate "TI wlcore SPI support"
depends on WLCORE && SPI_MASTER && OF
select CRC7
- ---help---
+ help
This module adds support for the SPI interface of adapters using
TI WLAN chipsets. Select this if your platform is using
the SPI bus.
@@ -27,7 +27,7 @@ config WLCORE_SPI
config WLCORE_SDIO
tristate "TI wlcore SDIO support"
depends on WLCORE && MMC
- ---help---
+ help
This module adds support for the SDIO interface of adapters using
TI WLAN chipsets. Select this if your platform is using
the SDIO bus.
diff --git a/drivers/net/wireless/zydas/Kconfig b/drivers/net/wireless/zydas/Kconfig
index 78a45cc4c014..08574433df66 100644
--- a/drivers/net/wireless/zydas/Kconfig
+++ b/drivers/net/wireless/zydas/Kconfig
@@ -2,7 +2,7 @@
config WLAN_VENDOR_ZYDAS
bool "ZyDAS devices"
default y
- ---help---
+ help
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
@@ -18,7 +18,7 @@ config USB_ZD1201
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
- ---help---
+ help
Say Y if you want to use wireless LAN adapters based on the ZyDAS
ZD1201 chip.
diff --git a/drivers/net/wireless/zydas/zd1211rw/Kconfig b/drivers/net/wireless/zydas/zd1211rw/Kconfig
index 0b7f1810f6e2..f9da8c0685d4 100644
--- a/drivers/net/wireless/zydas/zd1211rw/Kconfig
+++ b/drivers/net/wireless/zydas/zd1211rw/Kconfig
@@ -3,7 +3,7 @@ config ZD1211RW
tristate "ZyDAS ZD1211/ZD1211B USB-wireless support"
depends on USB && MAC80211
select FW_LOADER
- ---help---
+ help
This is a driver for the ZyDAS ZD1211/ZD1211B wireless
chip, present in many USB-wireless adapters.
@@ -13,7 +13,7 @@ config ZD1211RW
config ZD1211RW_DEBUG
bool "ZyDAS ZD1211 debugging"
depends on ZD1211RW
- ---help---
+ help
ZD1211 debugging messages. Choosing Y will result in additional debug
messages being saved to your kernel logs, which may help debug any
problems.