summaryrefslogtreecommitdiff
path: root/drivers/phy
diff options
context:
space:
mode:
authorStephan Gerhold <stephan@gerhold.net>2019-10-08 14:52:08 +0300
committerKishon Vijay Abraham I <kishon@ti.com>2019-10-31 14:24:01 +0300
commit64f86b9978449ff05bfa6c64b4c5439e21e9c80b (patch)
tree6ff52f6c494648f2c17022909fd861a48cfe5ea1 /drivers/phy
parentc9baab38fe0e28762d0d67611cbe2aef0fb3fc72 (diff)
downloadlinux-64f86b9978449ff05bfa6c64b4c5439e21e9c80b.tar.xz
phy: qcom-usb-hs: Fix extcon double register after power cycle
Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") switched from extcon_register_notifier() to the resource-managed API, i.e. devm_extcon_register_notifier(). This is problematic in this case, because the extcon notifier is dynamically registered/unregistered whenever the PHY is powered on/off. The resource-managed API does not unregister the notifier until the driver is removed, so as soon as the PHY is power cycled, attempting to register the notifier again results in: double register detected WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0 Call trace: ... extcon_register_notifier+0x74/0xb8 devm_extcon_register_notifier+0x54/0xb8 qcom_usb_hs_phy_power_on+0x1fc/0x208 ... ... and USB stops working after plugging the cable out and in another time. The easiest way to fix this is to make a partial revert of commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") and avoid using the resource-managed API in this case. Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/qualcomm/phy-qcom-usb-hs.c7
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index b163b3a1558d..61054272a7c8 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -158,8 +158,8 @@ static int qcom_usb_hs_phy_power_on(struct phy *phy)
/* setup initial state */
qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
uphy->vbus_edev);
- ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
- EXTCON_USB, &uphy->vbus_notify);
+ ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+ &uphy->vbus_notify);
if (ret)
goto err_ulpi;
}
@@ -180,6 +180,9 @@ static int qcom_usb_hs_phy_power_off(struct phy *phy)
{
struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
+ if (uphy->vbus_edev)
+ extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+ &uphy->vbus_notify);
regulator_disable(uphy->v3p3);
regulator_disable(uphy->v1p8);
clk_disable_unprepare(uphy->sleep_clk);