diff options
author | David Wu <david.wu@rock-chips.com> | 2016-02-01 05:58:21 +0300 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2016-02-10 18:41:03 +0300 |
commit | b6c2327577e03895f49be794e4c575ee2caa31cd (patch) | |
tree | 07a7c82c7f83a007dee6a3d4fd80eef383000128 /drivers/pinctrl | |
parent | aac7e974ebbd2b8c3ce2d9874ca6a60ce0528281 (diff) | |
download | linux-b6c2327577e03895f49be794e4c575ee2caa31cd.tar.xz |
pinctrl: rockchip: add support for the rk3399
The pinctrl of rk3399 is much different from other's,
especially the 3bits of drive strength.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r-- | drivers/pinctrl/pinctrl-rockchip.c | 369 |
1 files changed, 355 insertions, 14 deletions
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 183545a068ad..bf032b9b4c57 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -64,6 +64,7 @@ enum rockchip_pinctrl_type { RK3188, RK3288, RK3368, + RK3399, }; /** @@ -86,6 +87,31 @@ struct rockchip_iomux { }; /** + * enum type index corresponding to rockchip_perpin_drv_list arrays index. + */ +enum rockchip_pin_drv_type { + DRV_TYPE_IO_DEFAULT = 0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_3V0_AUTO, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_MAX +}; + +/** + * @drv_type: drive strength variant using rockchip_perpin_drv_type + * @offset: if initialized to -1 it will be autocalculated, by specifying + * an initial offset value the relevant source offset can be reset + * to a new value for autocalculating the following drive strength + * registers. if used chips own cal_drv func instead to calculate + * registers offset, the variant could be ignored. + */ +struct rockchip_drv { + enum rockchip_pin_drv_type drv_type; + int offset; +}; + +/** * @reg_base: register base of the gpio bank * @reg_pull: optional separate register for additional pull settings * @clk: clock of the gpio bank @@ -96,6 +122,7 @@ struct rockchip_iomux { * @name: name of the bank * @bank_num: number of the bank, to account for holes * @iomux: array describing the 4 iomux sources of the bank + * @drv: array describing the 4 drive strength sources of the bank * @valid: are all necessary informations present * @of_node: dt node of this bank * @drvdata: common pinctrl basedata @@ -115,6 +142,7 @@ struct rockchip_pin_bank { char *name; u8 bank_num; struct rockchip_iomux iomux[4]; + struct rockchip_drv drv[4]; bool valid; struct device_node *of_node; struct rockchip_pinctrl *drvdata; @@ -151,6 +179,47 @@ struct rockchip_pin_bank { }, \ } +#define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = type0, .offset = -1 }, \ + { .drv_type = type1, .offset = -1 }, \ + { .drv_type = type2, .offset = -1 }, \ + { .drv_type = type3, .offset = -1 }, \ + }, \ + } + +#define PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(id, pins, label, iom0, iom1, \ + iom2, iom3, drv0, drv1, drv2, \ + drv3, offset0, offset1, \ + offset2, offset3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = drv0, .offset = offset0 }, \ + { .drv_type = drv1, .offset = offset1 }, \ + { .drv_type = drv2, .offset = offset2 }, \ + { .drv_type = drv3, .offset = offset3 }, \ + }, \ + } + /** */ struct rockchip_pin_ctrl { @@ -161,6 +230,9 @@ struct rockchip_pin_ctrl { enum rockchip_pinctrl_type type; int grf_mux_offset; int pmu_mux_offset; + int grf_drv_offset; + int pmu_drv_offset; + void (*pull_calc_reg)(struct rockchip_pin_bank *bank, int pin_num, struct regmap **regmap, int *reg, u8 *bit); @@ -705,7 +777,68 @@ static void rk3368_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, } } -static int rockchip_perpin_drv_list[] = { 2, 4, 8, 12 }; +#define RK3399_PULL_GRF_OFFSET 0xe040 +#define RK3399_PULL_PMU_OFFSET 0x40 +#define RK3399_DRV_3BITS_PER_PIN 3 + +static void rk3399_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The bank0:16 and bank1:32 pins are located in PMU */ + if ((bank->bank_num == 0) || (bank->bank_num == 1)) { + *regmap = info->regmap_pmu; + *reg = RK3399_PULL_PMU_OFFSET; + + *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; + + *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); + *bit = pin_num % RK3188_PULL_PINS_PER_REG; + *bit *= RK3188_PULL_BITS_PER_PIN; + } else { + *regmap = info->regmap_base; + *reg = RK3399_PULL_GRF_OFFSET; + + /* correct the offset, as we're starting with the 3rd bank */ + *reg -= 0x20; + *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3188_PULL_PINS_PER_REG); + *bit *= RK3188_PULL_BITS_PER_PIN; + } +} + +static void rk3399_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + int drv_num = (pin_num / 8); + + /* The bank0:16 and bank1:32 pins are located in PMU */ + if ((bank->bank_num == 0) || (bank->bank_num == 1)) + *regmap = info->regmap_pmu; + else + *regmap = info->regmap_base; + + *reg = bank->drv[drv_num].offset; + if ((bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) || + (bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY)) + *bit = (pin_num % 8) * 3; + else + *bit = (pin_num % 8) * 2; +} + +static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = { + { 2, 4, 8, 12, -1, -1, -1, -1 }, + { 3, 6, 9, 12, -1, -1, -1, -1 }, + { 5, 10, 15, 20, -1, -1, -1, -1 }, + { 4, 6, 8, 10, 12, 14, 16, 18 }, + { 4, 7, 10, 13, 16, 19, 22, 26 } +}; static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank, int pin_num) @@ -714,19 +847,74 @@ static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank, struct rockchip_pin_ctrl *ctrl = info->ctrl; struct regmap *regmap; int reg, ret; - u32 data; + u32 data, temp, rmask_bits; u8 bit; + int drv_type = bank->drv[pin_num / 8].drv_type; ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); + switch (drv_type) { + case DRV_TYPE_IO_1V8_3V0_AUTO: + case DRV_TYPE_IO_3V3_ONLY: + rmask_bits = RK3399_DRV_3BITS_PER_PIN; + switch (bit) { + case 0 ... 12: + /* regular case, nothing to do */ + break; + case 15: + /* + * drive-strength offset is special, as it is + * spread over 2 registers + */ + ret = regmap_read(regmap, reg, &data); + if (ret) + return ret; + + ret = regmap_read(regmap, reg + 0x4, &temp); + if (ret) + return ret; + + /* + * the bit data[15] contains bit 0 of the value + * while temp[1:0] contains bits 2 and 1 + */ + data >>= 15; + temp &= 0x3; + temp <<= 1; + data |= temp; + + return rockchip_perpin_drv_list[drv_type][data]; + case 18 ... 21: + /* setting fully enclosed in the second register */ + reg += 4; + bit -= 16; + break; + default: + dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", + bit, drv_type); + return -EINVAL; + } + + break; + case DRV_TYPE_IO_DEFAULT: + case DRV_TYPE_IO_1V8_OR_3V0: + case DRV_TYPE_IO_1V8_ONLY: + rmask_bits = RK3288_DRV_BITS_PER_PIN; + break; + default: + dev_err(info->dev, "unsupported pinctrl drive type: %d\n", + drv_type); + return -EINVAL; + } + ret = regmap_read(regmap, reg, &data); if (ret) return ret; data >>= bit; - data &= (1 << RK3288_DRV_BITS_PER_PIN) - 1; + data &= (1 << rmask_bits) - 1; - return rockchip_perpin_drv_list[data]; + return rockchip_perpin_drv_list[drv_type][data]; } static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, @@ -737,16 +925,23 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, struct regmap *regmap; unsigned long flags; int reg, ret, i; - u32 data, rmask; + u32 data, rmask, rmask_bits, temp; u8 bit; + int drv_type = bank->drv[pin_num / 8].drv_type; + + dev_dbg(info->dev, "setting drive of GPIO%d-%d to %d\n", + bank->bank_num, pin_num, strength); ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); ret = -EINVAL; - for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list); i++) { - if (rockchip_perpin_drv_list[i] == strength) { + for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) { + if (rockchip_perpin_drv_list[drv_type][i] == strength) { ret = i; break; + } else if (rockchip_perpin_drv_list[drv_type][i] < 0) { + ret = rockchip_perpin_drv_list[drv_type][i]; + break; } } @@ -758,8 +953,64 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, spin_lock_irqsave(&bank->slock, flags); + switch (drv_type) { + case DRV_TYPE_IO_1V8_3V0_AUTO: + case DRV_TYPE_IO_3V3_ONLY: + rmask_bits = RK3399_DRV_3BITS_PER_PIN; + switch (bit) { + case 0 ... 12: + /* regular case, nothing to do */ + break; + case 15: + /* + * drive-strength offset is special, as it is spread + * over 2 registers, the bit data[15] contains bit 0 + * of the value while temp[1:0] contains bits 2 and 1 + */ + data = (ret & 0x1) << 15; + temp = (ret >> 0x1) & 0x3; + + rmask = BIT(15) | BIT(31); + data |= BIT(31); + ret = regmap_update_bits(regmap, reg, rmask, data); + if (ret) { + spin_unlock_irqrestore(&bank->slock, flags); + return ret; + } + + rmask = 0x3 | (0x3 << 16); + temp |= (0x3 << 16); + reg += 0x4; + ret = regmap_update_bits(regmap, reg, rmask, temp); + + spin_unlock_irqrestore(&bank->slock, flags); + return ret; + case 18 ... 21: + /* setting fully enclosed in the second register */ + reg += 4; + bit -= 16; + break; + default: + spin_unlock_irqrestore(&bank->slock, flags); + dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", + bit, drv_type); + return -EINVAL; + } + break; + case DRV_TYPE_IO_DEFAULT: + case DRV_TYPE_IO_1V8_OR_3V0: + case DRV_TYPE_IO_1V8_ONLY: + rmask_bits = RK3288_DRV_BITS_PER_PIN; + break; + default: + spin_unlock_irqrestore(&bank->slock, flags); + dev_err(info->dev, "unsupported pinctrl drive type: %d\n", + drv_type); + return -EINVAL; + } + /* enable the write to the equivalent lower bits */ - data = ((1 << RK3288_DRV_BITS_PER_PIN) - 1) << (bit + 16); + data = ((1 << rmask_bits) - 1) << (bit + 16); rmask = data | (data >> 16); data |= (ret << bit); @@ -796,6 +1047,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num) case RK3188: case RK3288: case RK3368: + case RK3399: data >>= bit; data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1; @@ -852,6 +1104,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank, case RK3188: case RK3288: case RK3368: + case RK3399: spin_lock_irqsave(&bank->slock, flags); /* enable the write to the equivalent lower bits */ @@ -1032,6 +1285,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, case RK3188: case RK3288: case RK3368: + case RK3399: return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT); } @@ -1892,7 +2146,7 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( struct device_node *np; struct rockchip_pin_ctrl *ctrl; struct rockchip_pin_bank *bank; - int grf_offs, pmu_offs, i, j; + int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j; match = of_match_node(rockchip_pinctrl_dt_match, node); ctrl = (struct rockchip_pin_ctrl *)match->data; @@ -1916,6 +2170,8 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( grf_offs = ctrl->grf_mux_offset; pmu_offs = ctrl->pmu_mux_offset; + drv_pmu_offs = ctrl->pmu_drv_offset; + drv_grf_offs = ctrl->grf_drv_offset; bank = ctrl->pin_banks; for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { int bank_pins = 0; @@ -1925,27 +2181,39 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( bank->pin_base = ctrl->nr_pins; ctrl->nr_pins += bank->nr_pins; - /* calculate iomux offsets */ + /* calculate iomux and drv offsets */ for (j = 0; j < 4; j++) { struct rockchip_iomux *iom = &bank->iomux[j]; + struct rockchip_drv *drv = &bank->drv[j]; int inc; if (bank_pins >= bank->nr_pins) break; - /* preset offset value, set new start value */ + /* preset iomux offset value, set new start value */ if (iom->offset >= 0) { if (iom->type & IOMUX_SOURCE_PMU) pmu_offs = iom->offset; else grf_offs = iom->offset; - } else { /* set current offset */ + } else { /* set current iomux offset */ iom->offset = (iom->type & IOMUX_SOURCE_PMU) ? pmu_offs : grf_offs; } - dev_dbg(d->dev, "bank %d, iomux %d has offset 0x%x\n", - i, j, iom->offset); + /* preset drv offset value, set new start value */ + if (drv->offset >= 0) { + if (iom->type & IOMUX_SOURCE_PMU) + drv_pmu_offs = drv->offset; + else + drv_grf_offs = drv->offset; + } else { /* set current drv offset */ + drv->offset = (iom->type & IOMUX_SOURCE_PMU) ? + drv_pmu_offs : drv_grf_offs; + } + + dev_dbg(d->dev, "bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n", + i, j, iom->offset, drv->offset); /* * Increase offset according to iomux width. @@ -1957,6 +2225,21 @@ static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( else grf_offs += inc; + /* + * Increase offset according to drv width. + * 3bit drive-strenth'es are spread over two registers. + */ + if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) || + (drv->drv_type == DRV_TYPE_IO_3V3_ONLY)) + inc = 8; + else + inc = 4; + + if (iom->type & IOMUX_SOURCE_PMU) + drv_pmu_offs += inc; + else + drv_grf_offs += inc; + bank_pins += 8; } } @@ -2257,6 +2540,62 @@ static struct rockchip_pin_ctrl rk3368_pin_ctrl = { .drv_calc_reg = rk3368_calc_drv_reg_and_bit, }; +static struct rockchip_pin_bank rk3399_pin_banks[] = { + PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(0, 32, "gpio0", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_DEFAULT, + DRV_TYPE_IO_DEFAULT, + 0x0, + 0x8, + -1, + -1 + ), + PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + 0x20, + 0x28, + 0x30, + 0x38 + ), + PIN_BANK_DRV_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_ONLY + ), + PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_1V8_OR_3V0 + ), + PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_3V0_AUTO, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0 + ), +}; + +static struct rockchip_pin_ctrl rk3399_pin_ctrl = { + .pin_banks = rk3399_pin_banks, + .nr_banks = ARRAY_SIZE(rk3399_pin_banks), + .label = "RK3399-GPIO", + .type = RK3399, + .grf_mux_offset = 0xe000, + .pmu_mux_offset = 0x0, + .grf_drv_offset = 0xe100, + .pmu_drv_offset = 0x80, + .pull_calc_reg = rk3399_calc_pull_reg_and_bit, + .drv_calc_reg = rk3399_calc_drv_reg_and_bit, +}; static const struct of_device_id rockchip_pinctrl_dt_match[] = { { .compatible = "rockchip,rk2928-pinctrl", @@ -2275,6 +2614,8 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = { .data = (void *)&rk3288_pin_ctrl }, { .compatible = "rockchip,rk3368-pinctrl", .data = (void *)&rk3368_pin_ctrl }, + { .compatible = "rockchip,rk3399-pinctrl", + .data = (void *)&rk3399_pin_ctrl }, {}, }; MODULE_DEVICE_TABLE(of, rockchip_pinctrl_dt_match); |