summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorPat Gefre <pfg@sgi.com>2005-10-31 02:02:49 +0300
committerLinus Torvalds <torvalds@g5.osdl.org>2005-10-31 04:37:24 +0300
commit396dc44bcac58f464b7b23c345052e37881cccea (patch)
tree1156e342fc1ec7ca157903487287b4f3a4047198 /drivers/serial
parent5b11687924e40790deb0d5f959247ade82196665 (diff)
downloadlinux-396dc44bcac58f464b7b23c345052e37881cccea.tar.xz
[PATCH] ioc4 serial support - mostly cleanup
Various small mods for the Altix ioc4 serial driver - mostly cleanup: - remove UIF_INITIALIZED usage - use the 'lock' from uart_port - better multiple card support Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/ioc4_serial.c80
1 files changed, 44 insertions, 36 deletions
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index f88fdd480685..771676abee60 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -308,6 +308,8 @@ struct ioc4_serial {
typedef void ioc4_intr_func_f(void *, uint32_t);
typedef ioc4_intr_func_f *ioc4_intr_func_t;
+static unsigned int Num_of_ioc4_cards;
+
/* defining this will get you LOTS of great debug info */
//#define DEBUG_INTERRUPTS
#define DPRINT_CONFIG(_x...) ;
@@ -317,7 +319,8 @@ typedef ioc4_intr_func_f *ioc4_intr_func_t;
#define WAKEUP_CHARS 256
/* number of characters we want to transmit to the lower level at a time */
-#define IOC4_MAX_CHARS 128
+#define IOC4_MAX_CHARS 256
+#define IOC4_FIFO_CHARS 255
/* Device name we're using */
#define DEVICE_NAME "ttyIOC"
@@ -1038,6 +1041,7 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
return -ENOMEM;
}
memset(port, 0, sizeof(struct ioc4_port));
+ spin_lock_init(&port->ip_lock);
/* we need to remember the previous ones, to point back to
* them farther down - setting up the ring buffers.
@@ -1691,12 +1695,14 @@ ioc4_change_speed(struct uart_port *the_port,
baud = 9600;
if (!the_port->fifosize)
- the_port->fifosize = IOC4_MAX_CHARS;
+ the_port->fifosize = IOC4_FIFO_CHARS;
the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
the_port->ignore_status_mask = N_ALL_INPUT;
+ info->tty->low_latency = 1;
+
if (I_IGNPAR(info->tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
@@ -1742,7 +1748,6 @@ ioc4_change_speed(struct uart_port *the_port,
*/
static inline int ic4_startup_local(struct uart_port *the_port)
{
- int retval = 0;
struct ioc4_port *port;
struct uart_info *info;
@@ -1754,9 +1759,6 @@ static inline int ic4_startup_local(struct uart_port *the_port)
return -1;
info = the_port->info;
- if (info->flags & UIF_INITIALIZED) {
- return retval;
- }
if (info->tty) {
set_bit(TTY_IO_ERROR, &info->tty->flags);
@@ -1775,7 +1777,6 @@ static inline int ic4_startup_local(struct uart_port *the_port)
/* set the speed of the serial port */
ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
- info->flags |= UIF_INITIALIZED;
return 0;
}
@@ -1785,9 +1786,13 @@ static inline int ic4_startup_local(struct uart_port *the_port)
*/
static void ioc4_cb_output_lowat(struct ioc4_port *port)
{
+ unsigned long pflags;
+
/* ip_lock is set on the call here */
if (port->ip_port) {
+ spin_lock_irqsave(&port->ip_port->lock, pflags);
transmit_chars(port->ip_port);
+ spin_unlock_irqrestore(&port->ip_port->lock, pflags);
}
}
@@ -2064,8 +2069,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
* available data as long as it returns some.
*/
/* Re-arm the timer */
- writel(port->ip_rx_cons | IOC4_SRCIR_ARM,
- &port->ip_serial_regs->srcir);
+ writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir);
prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
cons_ptr = port->ip_rx_cons;
@@ -2299,6 +2303,7 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
}
return total;
}
+
/**
* receive_chars - upper level read. Called with ip_lock.
* @the_port: port to read from
@@ -2307,9 +2312,11 @@ static void receive_chars(struct uart_port *the_port)
{
struct tty_struct *tty;
unsigned char ch[IOC4_MAX_CHARS];
- int read_count, request_count;
+ int read_count, request_count = IOC4_MAX_CHARS;
struct uart_icount *icount;
struct uart_info *info = the_port->info;
+ int flip = 0;
+ unsigned long pflags;
/* Make sure all the pointers are "good" ones */
if (!info)
@@ -2317,16 +2324,17 @@ static void receive_chars(struct uart_port *the_port)
if (!info->tty)
return;
+ spin_lock_irqsave(&the_port->lock, pflags);
tty = info->tty;
- request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
+ if (request_count > TTY_FLIPBUF_SIZE - tty->flip.count)
+ request_count = TTY_FLIPBUF_SIZE - tty->flip.count;
if (request_count > 0) {
- if (request_count > IOC4_MAX_CHARS - 2)
- request_count = IOC4_MAX_CHARS - 2;
icount = &the_port->icount;
read_count = do_read(the_port, ch, request_count);
if (read_count > 0) {
+ flip = 1;
memcpy(tty->flip.char_buf_ptr, ch, read_count);
memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
tty->flip.char_buf_ptr += read_count;
@@ -2335,7 +2343,11 @@ static void receive_chars(struct uart_port *the_port)
icount->rx += read_count;
}
}
- tty_flip_buffer_push(tty);
+
+ spin_unlock_irqrestore(&the_port->lock, pflags);
+
+ if (flip)
+ tty_flip_buffer_push(tty);
}
/**
@@ -2393,18 +2405,14 @@ static void ic4_shutdown(struct uart_port *the_port)
info = the_port->info;
- if (!(info->flags & UIF_INITIALIZED))
- return;
-
wake_up_interruptible(&info->delta_msr_wait);
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
- spin_lock_irqsave(&port->ip_lock, port_flags);
+ spin_lock_irqsave(&the_port->lock, port_flags);
set_notification(port, N_ALL, 0);
- info->flags &= ~UIF_INITIALIZED;
- spin_unlock_irqrestore(&port->ip_lock, port_flags);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
}
/**
@@ -2463,12 +2471,10 @@ static unsigned int ic4_get_mctrl(struct uart_port *the_port)
static void ic4_start_tx(struct uart_port *the_port)
{
struct ioc4_port *port = get_ioc4_port(the_port);
- unsigned long flags;
if (port) {
- spin_lock_irqsave(&port->ip_lock, flags);
- transmit_chars(the_port);
- spin_unlock_irqrestore(&port->ip_lock, flags);
+ set_notification(port, N_OUTPUT_LOWAT, 1);
+ enable_intrs(port, port->ip_hooks->intr_tx_mt);
}
}
@@ -2510,9 +2516,9 @@ static int ic4_startup(struct uart_port *the_port)
}
/* Start up the serial port */
- spin_lock_irqsave(&port->ip_lock, port_flags);
+ spin_lock_irqsave(&the_port->lock, port_flags);
retval = ic4_startup_local(the_port);
- spin_unlock_irqrestore(&port->ip_lock, port_flags);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
return retval;
}
@@ -2527,12 +2533,11 @@ static void
ic4_set_termios(struct uart_port *the_port,
struct termios *termios, struct termios *old_termios)
{
- struct ioc4_port *port = get_ioc4_port(the_port);
unsigned long port_flags;
- spin_lock_irqsave(&port->ip_lock, port_flags);
+ spin_lock_irqsave(&the_port->lock, port_flags);
ioc4_change_speed(the_port, termios, old_termios);
- spin_unlock_irqrestore(&port->ip_lock, port_flags);
+ spin_unlock_irqrestore(&the_port->lock, port_flags);
}
/**
@@ -2607,24 +2612,25 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
__FUNCTION__, (void *)the_port,
(void *)port));
- spin_lock_init(&the_port->lock);
/* membase, iobase and mapbase just need to be non-0 */
the_port->membase = (unsigned char __iomem *)1;
- the_port->line = the_port->iobase = ii;
+ the_port->iobase = (pdev->bus->number << 16) | ii;
+ the_port->line = (Num_of_ioc4_cards << 2) | ii;
the_port->mapbase = 1;
the_port->type = PORT_16550A;
- the_port->fifosize = IOC4_MAX_CHARS;
+ the_port->fifosize = IOC4_FIFO_CHARS;
the_port->ops = &ioc4_ops;
the_port->irq = control->ic_irq;
the_port->dev = &pdev->dev;
+ spin_lock_init(&the_port->lock);
if (uart_add_one_port(&ioc4_uart, the_port) < 0) {
printk(KERN_WARNING
- "%s: unable to add port %d\n",
- __FUNCTION__, the_port->line);
+ "%s: unable to add port %d bus %d\n",
+ __FUNCTION__, the_port->line, pdev->bus->number);
} else {
DPRINT_CONFIG(
- ("IOC4 serial driver port %d irq = %d\n",
- the_port->line, the_port->irq));
+ ("IOC4 serial port %d irq = %d, bus %d\n",
+ the_port->line, the_port->irq, pdev->bus->number));
}
/* all ports are rs232 for now */
ioc4_set_proto(port, PROTO_RS232);
@@ -2734,6 +2740,8 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
if ((ret = ioc4_serial_core_attach(idd->idd_pdev)))
goto out4;
+ Num_of_ioc4_cards++;
+
return ret;
/* error exits that give back resources */